summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2021-08-26net: usb: lan78xx: don't modify phy_device state concurrentlyIvan T. Ivanov1-4/+12
[ Upstream commit 6b67d4d63edece1033972214704c04f36c5be89a ] Currently phy_device state could be left in inconsistent state shown by following alert message[1]. This is because phy_read_status could be called concurrently from lan78xx_delayedwork, phy_state_machine and __ethtool_get_link. Fix this by making sure that phy_device state is updated atomically. [1] lan78xx 1-1.1.1:1.0 eth0: No phy led trigger registered for speed(-1) Signed-off-by: Ivan T. Ivanov <iivanov@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26ath9k: Postpone key cache entry deletion for TXQ frames reference itJouni Malinen2-1/+87
commit ca2848022c12789685d3fab3227df02b863f9696 upstream. Do not delete a key cache entry that is still being referenced by pending frames in TXQs. This avoids reuse of the key cache entry while a frame might still be transmitted using it. To avoid having to do any additional operations during the main TX path operations, track pending key cache entries in a new bitmap and check whether any pending entries can be deleted before every new key add/remove operation. Also clear any remaining entries when stopping the interface. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201214172118.18100-6-jouni@codeaurora.org Cc: Pali Rohár <pali@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26ath: Modify ath_key_delete() to not need full key entryJouni Malinen5-23/+22
commit 144cd24dbc36650a51f7fe3bf1424a1432f1f480 upstream. tkip_keymap can be used internally to avoid the reference to key->cipher and with this, only the key index value itself is needed. This allows ath_key_delete() call to be postponed to be handled after the upper layer STA and key entry have already been removed. This is needed to make ath9k key cache management safer. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201214172118.18100-5-jouni@codeaurora.org Cc: Pali Rohár <pali@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26ath: Export ath_hw_keysetmac()Jouni Malinen2-2/+3
commit d2d3e36498dd8e0c83ea99861fac5cf9e8671226 upstream. ath9k is going to use this for safer management of key cache entries. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201214172118.18100-4-jouni@codeaurora.org Cc: Pali Rohár <pali@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26ath9k: Clear key cache explicitly on disabling hardwareJouni Malinen1-0/+5
commit 73488cb2fa3bb1ef9f6cf0d757f76958bd4deaca upstream. Now that ath/key.c may not be explicitly clearing keys from the key cache, clear all key cache entries when disabling hardware to make sure no keys are left behind beyond this point. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201214172118.18100-3-jouni@codeaurora.org Cc: Pali Rohár <pali@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26ath: Use safer key clearing with key cache entriesJouni Malinen1-1/+10
commit 56c5485c9e444c2e85e11694b6c44f1338fc20fd upstream. It is possible for there to be pending frames in TXQs with a reference to the key cache entry that is being deleted. If such a key cache entry is cleared, those pending frame in TXQ might get transmitted without proper encryption. It is safer to leave the previously used key into the key cache in such cases. Instead, only clear the MAC address to prevent RX processing from using this key cache entry. This is needed in particularly in AP mode where the TXQs cannot be flushed on station disconnection. This change alone may not be able to address all cases where the key cache entry might get reused for other purposes immediately (the key cache entry should be released for reuse only once the TXQs do not have any remaining references to them), but this makes it less likely to get unprotected frames and the more complete changes may end up being significantly more complex. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201214172118.18100-2-jouni@codeaurora.org Cc: Pali Rohár <pali@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-18net: dsa: sja1105: fix broken backpressure in .port_fdb_dumpVladimir Oltean1-1/+3
[ Upstream commit 21b52fed928e96d2f75d2f6aa9eac7a4b0b55d22 ] rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into multiple netlink skbs if the buffer provided by user space is too small (one buffer will typically handle a few hundred FDB entries). When the current buffer becomes full, nlmsg_put() in dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that point, and then the dump resumes on the same port with a new skb, and FDB entries up to the saved index are simply skipped. Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to drivers, then drivers must check for the -EMSGSIZE error code returned by it. Otherwise, when a netlink skb becomes full, DSA will no longer save newly dumped FDB entries to it, but the driver will continue dumping. So FDB entries will be missing from the dump. Fix the broken backpressure by propagating the "cb" return code and allow rtnl_fdb_dump() to restart the FDB dump with a new skb. Fixes: 291d1e72b756 ("net: dsa: sja1105: Add support for FDB and MDB management") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net: dsa: lantiq: fix broken backpressure in .port_fdb_dumpVladimir Oltean1-4/+10
[ Upstream commit 871a73a1c8f55da0a3db234e9dd816ea4fd546f2 ] rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into multiple netlink skbs if the buffer provided by user space is too small (one buffer will typically handle a few hundred FDB entries). When the current buffer becomes full, nlmsg_put() in dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that point, and then the dump resumes on the same port with a new skb, and FDB entries up to the saved index are simply skipped. Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to drivers, then drivers must check for the -EMSGSIZE error code returned by it. Otherwise, when a netlink skb becomes full, DSA will no longer save newly dumped FDB entries to it, but the driver will continue dumping. So FDB entries will be missing from the dump. Fix the broken backpressure by propagating the "cb" return code and allow rtnl_fdb_dump() to restart the FDB dump with a new skb. Fixes: 58c59ef9e930 ("net: dsa: lantiq: Add Forwarding Database access") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net: dsa: lan9303: fix broken backpressure in .port_fdb_dumpVladimir Oltean1-15/+19
[ Upstream commit ada2fee185d8145afb89056558bb59545b9dbdd0 ] rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into multiple netlink skbs if the buffer provided by user space is too small (one buffer will typically handle a few hundred FDB entries). When the current buffer becomes full, nlmsg_put() in dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that point, and then the dump resumes on the same port with a new skb, and FDB entries up to the saved index are simply skipped. Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to drivers, then drivers must check for the -EMSGSIZE error code returned by it. Otherwise, when a netlink skb becomes full, DSA will no longer save newly dumped FDB entries to it, but the driver will continue dumping. So FDB entries will be missing from the dump. Fix the broken backpressure by propagating the "cb" return code and allow rtnl_fdb_dump() to restart the FDB dump with a new skb. Fixes: ab335349b852 ("net: dsa: lan9303: Add port_fast_age and port_fdb_dump methods") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net: dsa: microchip: Fix ksz_read64()Ben Hutchings1-6/+2
[ Upstream commit c34f674c8875235725c3ef86147a627f165d23b4 ] ksz_read64() currently does some dubious byte-swapping on the two halves of a 64-bit register, and then only returns the high bits. Replace this with a straightforward expression. Fixes: e66f840c08a2 ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver") Signed-off-by: Ben Hutchings <ben.hutchings@mind.be> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net/mlx5: Fix return value from tracer initializationAya Levin1-2/+9
[ Upstream commit bd37c2888ccaa5ceb9895718f6909b247cc372e0 ] Check return value of mlx5_fw_tracer_start(), set error path and fix return value of mlx5_fw_tracer_init() accordingly. Fixes: c71ad41ccb0c ("net/mlx5: FW tracer, events handling") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18iavf: Set RSS LUT and key in reset handle pathMd Fahad Iqbal Polash1-5/+8
[ Upstream commit a7550f8b1c9712894f9e98d6caf5f49451ebd058 ] iavf driver should set RSS LUT and key unconditionally in reset path. Currently, the driver does not do that. This patch fixes this issue. Fixes: 2c86ac3c7079 ("i40evf: create a generic config RSS function") Signed-off-by: Md Fahad Iqbal Polash <md.fahad.iqbal.polash@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18ppp: Fix generating ifname when empty IFLA_IFNAME is specifiedPali Rohár1-1/+1
[ Upstream commit 2459dcb96bcba94c08d6861f8a050185ff301672 ] IFLA_IFNAME is nul-term string which means that IFLA_IFNAME buffer can be larger than length of string which contains. Function __rtnl_newlink() generates new own ifname if either IFLA_IFNAME was not specified at all or userspace passed empty nul-term string. It is expected that if userspace does not specify ifname for new ppp netdev then kernel generates one in format "ppp<id>" where id matches to the ppp unit id which can be later obtained by PPPIOCGUNIT ioctl. And it works in this way if IFLA_IFNAME is not specified at all. But it does not work when IFLA_IFNAME is specified with empty string. So fix this logic also for empty IFLA_IFNAME in ppp_nl_newlink() function and correctly generates ifname based on ppp unit identifier if userspace did not provided preferred ifname. Without this patch when IFLA_IFNAME was specified with empty string then kernel created a new ppp interface in format "ppp<id>" but id did not match ppp unit id returned by PPPIOCGUNIT ioctl. In this case id was some number generated by __rtnl_newlink() function. Signed-off-by: Pali Rohár <pali@kernel.org> Fixes: bb8082f69138 ("ppp: build ifname using unit identifier for rtnl based devices") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net: phy: micrel: Fix link detection on ksz87xx switch"Ben Hutchings1-2/+0
[ Upstream commit 2383cb9497d113360137a2be308b390faa80632d ] Commit a5e63c7d38d5 "net: phy: micrel: Fix detection of ksz87xx switch" broke link detection on the external ports of the KSZ8795. The previously unused phy_driver structure for these devices specifies config_aneg and read_status functions that appear to be designed for a fixed link and do not work with the embedded PHYs in the KSZ8795. Delete the use of these functions in favour of the generic PHY implementations which were used previously. Fixes: a5e63c7d38d5 ("net: phy: micrel: Fix detection of ksz87xx switch") Signed-off-by: Ben Hutchings <ben.hutchings@mind.be> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net: dsa: mt7530: add the missing RxUnicast MIB counterDENG Qingfang1-0/+1
[ Upstream commit aff51c5da3208bd164381e1488998667269c6cf4 ] Add the missing RxUnicast counter. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18ieee802154: hwsim: fix GPF in hwsim_new_edge_nlDongliang Mu1-1/+1
[ Upstream commit 889d0e7dc68314a273627d89cbb60c09e1cc1c25 ] Both MAC802154_HWSIM_ATTR_RADIO_ID and MAC802154_HWSIM_ATTR_RADIO_EDGE must be present to fix GPF. Fixes: f25da51fdc38 ("ieee802154: hwsim: add replacement for fakelb") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20210707155633.1486603-1-mudongliangabcd@gmail.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18ieee802154: hwsim: fix GPF in hwsim_set_edge_lqiDongliang Mu1-2/+2
[ Upstream commit e9faf53c5a5d01f6f2a09ae28ec63a3bbd6f64fd ] Both MAC802154_HWSIM_ATTR_RADIO_ID and MAC802154_HWSIM_ATTR_RADIO_EDGE, MAC802154_HWSIM_EDGE_ATTR_ENDPOINT_ID and MAC802154_HWSIM_EDGE_ATTR_LQI must be present to fix GPF. Fixes: f25da51fdc38 ("ieee802154: hwsim: add replacement for fakelb") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20210705131321.217111-1-mudongliangabcd@gmail.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-15net: xilinx_emaclite: Do not print real IOMEM pointerYueHaibing1-3/+2
commit d0d62baa7f505bd4c59cd169692ff07ec49dde37 upstream. Printing kernel pointers is discouraged because they might leak kernel memory layout. This fixes smatch warning: drivers/net/ethernet/xilinx/xilinx_emaclite.c:1191 xemaclite_of_probe() warn: argument 4 to %08lX specifier is cast from pointer Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Pavel Machek (CIP) <pavel@denx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-15ppp: Fix generating ppp unit id when ifname is not specifiedPali Rohár1-4/+15
commit 3125f26c514826077f2a4490b75e9b1c7a644c42 upstream. When registering new ppp interface via PPPIOCNEWUNIT ioctl then kernel has to choose interface name as this ioctl API does not support specifying it. Kernel in this case register new interface with name "ppp<id>" where <id> is the ppp unit id, which can be obtained via PPPIOCGUNIT ioctl. This applies also in the case when registering new ppp interface via rtnl without supplying IFLA_IFNAME. PPPIOCNEWUNIT ioctl allows to specify own ppp unit id which will kernel assign to ppp interface, in case this ppp id is not already used by other ppp interface. In case user does not specify ppp unit id then kernel choose the first free ppp unit id. This applies also for case when creating ppp interface via rtnl method as it does not provide a way for specifying own ppp unit id. If some network interface (does not have to be ppp) has name "ppp<id>" with this first free ppp id then PPPIOCNEWUNIT ioctl or rtnl call fails. And registering new ppp interface is not possible anymore, until interface which holds conflicting name is renamed. Or when using rtnl method with custom interface name in IFLA_IFNAME. As list of allocated / used ppp unit ids is not possible to retrieve from kernel to userspace, userspace has no idea what happens nor which interface is doing this conflict. So change the algorithm how ppp unit id is generated. And choose the first number which is not neither used as ppp unit id nor in some network interface with pattern "ppp<id>". This issue can be simply reproduced by following pppd call when there is no ppp interface registered and also no interface with name pattern "ppp<id>": pppd ifname ppp1 +ipv6 noip noauth nolock local nodetach pty "pppd +ipv6 noip noauth nolock local nodetach notty" Or by creating the one ppp interface (which gets assigned ppp unit id 0), renaming it to "ppp1" and then trying to create a new ppp interface (which will always fails as next free ppp unit id is 1, but network interface with name "ppp1" exists). This patch fixes above described issue by generating new and new ppp unit id until some non-conflicting id with network interfaces is generated. Signed-off-by: Pali Rohár <pali@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12net/qla3xxx: fix schedule while atomic in ql_wait_for_drvr_lock and ↵Letu Ren1-3/+3
ql_adapter_reset [ Upstream commit 92766c4628ea349c8ddab0cd7bd0488f36e5c4ce ] When calling the 'ql_wait_for_drvr_lock' and 'ql_adapter_reset', the driver has already acquired the spin lock, so the driver should not call 'ssleep' in atomic context. This bug can be fixed by using 'mdelay' instead of 'ssleep'. Reported-by: Letu Ren <fantasquex@gmail.com> Signed-off-by: Letu Ren <fantasquex@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12virt_wifi: fix error on connectMatteo Croce1-20/+32
[ Upstream commit 17109e9783799be2a063b2bd861a508194b0a487 ] When connecting without first doing a scan, the BSS list is empty and __cfg80211_connect_result() generates this warning: $ iw dev wlan0 connect -w VirtWifi [ 15.371989] ------------[ cut here ]------------ [ 15.372179] WARNING: CPU: 0 PID: 92 at net/wireless/sme.c:756 __cfg80211_connect_result+0x402/0x440 [ 15.372383] CPU: 0 PID: 92 Comm: kworker/u2:2 Not tainted 5.13.0-kvm #444 [ 15.372512] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-3.fc34 04/01/2014 [ 15.372597] Workqueue: cfg80211 cfg80211_event_work [ 15.372756] RIP: 0010:__cfg80211_connect_result+0x402/0x440 [ 15.372818] Code: 48 2b 04 25 28 00 00 00 75 59 48 8b 3b 48 8b 76 10 48 8d 65 e0 5b 41 5c 41 5d 41 5e 5d 49 8d 65 f0 41 5d e9 d0 d4 fd ff 0f 0b <0f> 0b e9 f6 fd ff ff e8 f2 4a b4 ff e9 ec fd ff ff 0f 0b e9 19 fd [ 15.372966] RSP: 0018:ffffc900005cbdc0 EFLAGS: 00010246 [ 15.373022] RAX: 0000000000000000 RBX: ffff8880028e2400 RCX: ffff8880028e2472 [ 15.373088] RDX: 0000000000000002 RSI: 00000000fffffe01 RDI: ffffffff815335ba [ 15.373149] RBP: ffffc900005cbe00 R08: 0000000000000008 R09: ffff888002bdf8b8 [ 15.373209] R10: ffff88803ec208f0 R11: ffffffffffffe9ae R12: ffff88801d687d98 [ 15.373280] R13: ffff88801b5fe000 R14: ffffc900005cbdc0 R15: dead000000000100 [ 15.373330] FS: 0000000000000000(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000 [ 15.373382] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 15.373425] CR2: 000056421c468958 CR3: 000000001b458001 CR4: 0000000000170eb0 [ 15.373478] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 15.373529] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 15.373580] Call Trace: [ 15.373611] ? cfg80211_process_wdev_events+0x10e/0x170 [ 15.373743] cfg80211_process_wdev_events+0x10e/0x170 [ 15.373783] cfg80211_process_rdev_events+0x21/0x40 [ 15.373846] cfg80211_event_work+0x20/0x30 [ 15.373892] process_one_work+0x1e9/0x340 [ 15.373956] worker_thread+0x4b/0x3f0 [ 15.374017] ? process_one_work+0x340/0x340 [ 15.374053] kthread+0x11f/0x140 [ 15.374089] ? set_kthread_struct+0x30/0x30 [ 15.374153] ret_from_fork+0x1f/0x30 [ 15.374187] ---[ end trace 321ef0cb7e9c0be1 ]--- wlan0 (phy #0): connected to 00:00:00:00:00:00 Add the fake bss just before the connect so that cfg80211_get_bss() finds the virtual network. As some code was duplicated, move it in a common function. Signed-off-by: Matteo Croce <mcroce@microsoft.com> Link: https://lore.kernel.org/r/20210706154423.11065-1-mcroce@linux.microsoft.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12net: vxge: fix use-after-free in vxge_device_unregisterPavel Skripkin1-3/+3
[ Upstream commit 942e560a3d3862dd5dee1411dbdd7097d29b8416 ] Smatch says: drivers/net/ethernet/neterion/vxge/vxge-main.c:3518 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev); drivers/net/ethernet/neterion/vxge/vxge-main.c:3518 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev); drivers/net/ethernet/neterion/vxge/vxge-main.c:3520 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev); drivers/net/ethernet/neterion/vxge/vxge-main.c:3520 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev); Since vdev pointer is netdev private data accessing it after free_netdev() call can cause use-after-free bug. Fix it by moving free_netdev() call at the end of the function Fixes: 6cca200362b4 ("vxge: cleanup probe error paths") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12net: fec: fix use-after-free in fec_drv_removePavel Skripkin1-1/+1
[ Upstream commit 44712965bf12ae1758cec4de53816ed4b914ca1a ] Smatch says: drivers/net/ethernet/freescale/fec_main.c:3994 fec_drv_remove() error: Using fep after free_{netdev,candev}(ndev); drivers/net/ethernet/freescale/fec_main.c:3995 fec_drv_remove() error: Using fep after free_{netdev,candev}(ndev); Since fep pointer is netdev private data, accessing it after free_netdev() call can cause use-after-free bug. Fix it by moving free_netdev() call at the end of the function Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: a31eda65ba21 ("net: fec: fix clock count mis-match") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reviewed-by: Joakim Zhang <qiangqing.zhang@nxp.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12net: pegasus: fix uninit-value in get_interrupt_intervalPavel Skripkin1-3/+11
[ Upstream commit af35fc37354cda3c9c8cc4961b1d24bdc9d27903 ] Syzbot reported uninit value pegasus_probe(). The problem was in missing error handling. get_interrupt_interval() internally calls read_eprom_word() which can fail in some cases. For example: failed to receive usb control message. These cases should be handled to prevent uninit value bug, since read_eprom_word() will not initialize passed stack variable in case of internal failure. Fail log: BUG: KMSAN: uninit-value in get_interrupt_interval drivers/net/usb/pegasus.c:746 [inline] BUG: KMSAN: uninit-value in pegasus_probe+0x10e7/0x4080 drivers/net/usb/pegasus.c:1152 CPU: 1 PID: 825 Comm: kworker/1:1 Not tainted 5.12.0-rc6-syzkaller #0 ... Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x24c/0x2e0 lib/dump_stack.c:120 kmsan_report+0xfb/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x5c/0xa0 mm/kmsan/kmsan_instr.c:197 get_interrupt_interval drivers/net/usb/pegasus.c:746 [inline] pegasus_probe+0x10e7/0x4080 drivers/net/usb/pegasus.c:1152 .... Local variable ----data.i@pegasus_probe created at: get_interrupt_interval drivers/net/usb/pegasus.c:1151 [inline] pegasus_probe+0xe57/0x4080 drivers/net/usb/pegasus.c:1152 get_interrupt_interval drivers/net/usb/pegasus.c:1151 [inline] pegasus_probe+0xe57/0x4080 drivers/net/usb/pegasus.c:1152 Reported-and-tested-by: syzbot+02c9f70f3afae308464a@syzkaller.appspotmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Link: https://lore.kernel.org/r/20210804143005.439-1-paskripkin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12bnx2x: fix an error code in bnx2x_nic_load()Dan Carpenter1-1/+2
[ Upstream commit fb653827c758725b149b5c924a5eb50ab4812750 ] Set the error code if bnx2x_alloc_fw_stats_mem() fails. The current code returns success. Fixes: ad5afc89365e ("bnx2x: Separate VF and PF logic") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12nfp: update ethtool reporting of pauseframe controlFei Qin1-0/+2
[ Upstream commit 9fdc5d85a8fe684cdf24dc31c6bc4a727decfe87 ] Pauseframe control is set to symmetric mode by default on the NFP. Pause frames can not be configured through ethtool now, but ethtool can report the supported mode. Fixes: 265aeb511bd5 ("nfp: add support for .get_link_ksettings()") Signed-off-by: Fei Qin <fei.qin@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12net: natsemi: Fix missing pci_disable_device() in probe and removeWang Hai1-6/+2
[ Upstream commit 7fe74dfd41c428afb24e2e615470832fa997ff14 ] Replace pci_enable_device() with pcim_enable_device(), pci_disable_device() and pci_release_regions() will be called in release automatically. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12net: phy: micrel: Fix detection of ksz87xx switchSteve Bennett1-5/+5
[ Upstream commit a5e63c7d38d548b8dab6c6205e0b6af76899dbf5 ] The logic for discerning between KSZ8051 and KSZ87XX PHYs is incorrect such that the that KSZ87XX switch is not identified correctly. ksz8051_ksz8795_match_phy_device() uses the parameter ksz_phy_id to discriminate whether it was called from ksz8051_match_phy_device() or from ksz8795_match_phy_device() but since PHY_ID_KSZ87XX is the same value as PHY_ID_KSZ8051, this doesn't work. Instead use a bool to discriminate the caller. Without this patch, the KSZ8795 switch port identifies as: ksz8795-switch spi3.1 ade1 (uninitialized): PHY [dsa-0.1:03] driver [Generic PHY] With the patch, it identifies correctly: ksz8795-switch spi3.1 ade1 (uninitialized): PHY [dsa-0.1:03] driver [Micrel KSZ87XX Switch] Fixes: 8b95599c55ed24b36cf4 ("net: phy: micrel: Discern KSZ8051 and KSZ8795 PHYs") Signed-off-by: Steve Bennett <steveb@workware.net.au> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12net: dsa: sja1105: invalidate dynamic FDB entries learned concurrently with ↵Vladimir Oltean1-2/+55
statically added ones [ Upstream commit 6c5fc159e0927531707895709eee1f8bfa04289f ] The procedure to add a static FDB entry in sja1105 is concurrent with dynamic learning performed on all bridge ports and the CPU port. The switch looks up the FDB from left to right, and also learns dynamically from left to right, so it is possible that between the moment when we pick up a free slot to install an FDB entry, another slot to the left of that one becomes free due to an address ageing out, and that other slot is then immediately used by the switch to learn dynamically the same address as we're trying to add statically. The result is that we succeeded to add our static FDB entry, but it is being shadowed by a dynamic FDB entry to its left, and the switch will behave as if our static FDB entry did not exist. We cannot really prevent this from happening unless we make the entire process to add a static FDB entry a huge critical section where address learning is temporarily disabled on _all_ ports, and then re-enabled according to the configuration done by sja1105_port_set_learning. However, that is kind of disruptive for the operation of the network. What we can do alternatively is to simply read back the FDB for dynamic entries located before our newly added static one, and delete them. This will guarantee that our static FDB entry is now operational. It will still not guarantee that there aren't dynamic FDB entries to the _right_ of that static FDB entry, but at least those entries will age out by themselves since they aren't hit, and won't bother anyone. Fixes: 291d1e72b756 ("net: dsa: sja1105: Add support for FDB and MDB management") Fixes: 1da73821343c ("net: dsa: sja1105: Add FDB operations for P/Q/R/S series") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12net: dsa: sja1105: overwrite dynamic FDB entries with static ones in ↵Vladimir Oltean1-4/+6
.port_fdb_add [ Upstream commit e11e865bf84e3c6ea91563ff3e858cfe0e184bd2 ] The SJA1105 switch family leaves it up to software to decide where within the FDB to install a static entry, and to concatenate destination ports for already existing entries (the FDB is also used for multicast entries), it is not as simple as just saying "please add this entry". This means we first need to search for an existing FDB entry before adding a new one. The driver currently manages to fool itself into thinking that if an FDB entry already exists, there is nothing to be done. But that FDB entry might be dynamically learned, case in which it should be replaced with a static entry, but instead it is left alone. This patch checks the LOCKEDS ("locked/static") bit from found FDB entries, and lets the code "goto skip_finding_an_index;" if the FDB entry was not static. So we also need to move the place where we set LOCKEDS = true, to cover the new case where a dynamic FDB entry existed but was dynamic. Fixes: 291d1e72b756 ("net: dsa: sja1105: Add support for FDB and MDB management") Fixes: 1da73821343c ("net: dsa: sja1105: Add FDB operations for P/Q/R/S series") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-08qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()Jia He1-6/+17
[ Upstream commit 6206b7981a36476f4695d661ae139f7db36a802d ] Liajian reported a bug_on hit on a ThunderX2 arm64 server with FastLinQ QL41000 ethernet controller: BUG: scheduling while atomic: kworker/0:4/531/0x00000200 [qed_probe:488()]hw prepare failed kernel BUG at mm/vmalloc.c:2355! Internal error: Oops - BUG: 0 [#1] SMP CPU: 0 PID: 531 Comm: kworker/0:4 Tainted: G W 5.4.0-77-generic #86-Ubuntu pstate: 00400009 (nzcv daif +PAN -UAO) Call trace: vunmap+0x4c/0x50 iounmap+0x48/0x58 qed_free_pci+0x60/0x80 [qed] qed_probe+0x35c/0x688 [qed] __qede_probe+0x88/0x5c8 [qede] qede_probe+0x60/0xe0 [qede] local_pci_probe+0x48/0xa0 work_for_cpu_fn+0x24/0x38 process_one_work+0x1d0/0x468 worker_thread+0x238/0x4e0 kthread+0xf0/0x118 ret_from_fork+0x10/0x18 In this case, qed_hw_prepare() returns error due to hw/fw error, but in theory work queue should be in process context instead of interrupt. The root cause might be the unpaired spin_{un}lock_bh() in _qed_mcp_cmd_and_union(), which causes botton half is disabled incorrectly. Reported-by: Lijian Zhang <Lijian.Zhang@arm.com> Signed-off-by: Jia He <justin.he@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-08r8152: Fix potential PM refcount imbalanceTakashi Iwai1-1/+2
[ Upstream commit 9c23aa51477a37f8b56c3c40192248db0663c196 ] rtl8152_close() takes the refcount via usb_autopm_get_interface() but it doesn't release when RTL8152_UNPLUG test hits. This may lead to the imbalance of PM refcount. This patch addresses it. Link: https://bugzilla.suse.com/show_bug.cgi?id=1186194 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04i40e: Add additional info to PHY type errorLukasz Cieplicki1-1/+1
commit dc614c46178b0b89bde86ac54fc687a28580d2b7 upstream. In case of PHY type error occurs, the message was too generic. Add additional info to PHY type error indicating that it can be wrong cable connected. Fixes: 124ed15bf126 ("i40e: Add dual speed module support") Signed-off-by: Lukasz Cieplicki <lukaszx.cieplicki@intel.com> Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-04can: hi311x: fix a signedness bug in hi3110_cmd()Dan Carpenter1-1/+1
[ Upstream commit f6b3c7848e66e9046c8a79a5b88fd03461cc252b ] The hi3110_cmd() is supposed to return zero on success and negative error codes on failure, but it was accidentally declared as a u8 when it needs to be an int type. Fixes: 57e83fb9b746 ("can: hi311x: Add Holt HI-311x CAN driver") Link: https://lore.kernel.org/r/20210729141246.GA1267@kili Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04sis900: Fix missing pci_disable_device() in probe and removeWang Hai1-5/+2
[ Upstream commit 89fb62fde3b226f99b7015280cf132e2a7438edf ] Replace pci_enable_device() with pcim_enable_device(), pci_disable_device() and pci_release_regions() will be called in release automatically. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04tulip: windbond-840: Fix missing pci_disable_device() in probe and removeWang Hai1-5/+2
[ Upstream commit 76a16be07b209a3f507c72abe823bd3af1c8661a ] Replace pci_enable_device() with pcim_enable_device(), pci_disable_device() and pci_release_regions() will be called in release automatically. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04net/mlx5e: Fix nullptr in mlx5e_hairpin_get_mdev()Dima Chumak1-2/+31
[ Upstream commit b1c2f6312c5005c928a72e668bf305a589d828d4 ] The result of __dev_get_by_index() is not checked for NULL and then gets dereferenced immediately. Also, __dev_get_by_index() must be called while holding either RTNL lock or @dev_base_lock, which isn't satisfied by mlx5e_hairpin_get_mdev() or its callers. This makes the underlying hlist_for_each_entry() loop not safe, and can have adverse effects in itself. Fix by using dev_get_by_index() and handling nullptr return value when ifindex device is not found. Update mlx5e_hairpin_get_mdev() callers to check for possible PTR_ERR() result. Fixes: 77ab67b7f0f9 ("net/mlx5e: Basic setup of hairpin object") Addresses-Coverity: ("Dereference null return value") Signed-off-by: Dima Chumak <dchumak@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04net/mlx5: Fix flow table chainingMaor Gottlieb1-4/+6
[ Upstream commit 8b54874ef1617185048029a3083d510569e93751 ] Fix a bug when flow table is created in priority that already has other flow tables as shown in the below diagram. If the new flow table (FT-B) has the lowest level in the priority, we need to connect the flow tables from the previous priority (p0) to this new table. In addition when this flow table is destroyed (FT-B), we need to connect the flow tables from the previous priority (p0) to the next level flow table (FT-C) in the same priority of the destroyed table (if exists). --------- |root_ns| --------- | -------------------------------- | | | ---------- ---------- --------- |p(prio)-x| | p-y | | p-n | ---------- ---------- --------- | | ---------------- ------------------ |ns(e.g bypass)| |ns(e.g. kernel) | ---------------- ------------------ | | | ------- ------ ---- | p0 | | p1 | |p2| ------- ------ ---- | | \ -------- ------- ------ | FT-A | |FT-B | |FT-C| -------- ------- ------ Fixes: f90edfd279f3 ("net/mlx5_core: Connect flow tables") Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04mlx4: Fix missing error code in mlx4_load_one()Jiapeng Chong1-0/+1
[ Upstream commit 7e4960b3d66d7248b23de3251118147812b42da2 ] The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'err'. Eliminate the follow smatch warning: drivers/net/ethernet/mellanox/mlx4/main.c:3538 mlx4_load_one() warn: missing error code 'err'. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: 7ae0e400cd93 ("net/mlx4_core: Flexible (asymmetric) allocation of EQs and MSI-X vectors for PF/VFs") Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04i40e: Fix log TC creation failure when max num of queues is exceededJedrzej Jagielski1-0/+2
[ Upstream commit ea52faae1d17cd3048681d86d2e8641f44de484d ] Fix missing failed message if driver does not have enough queues to complete TC command. Without this fix no message is displayed in dmesg. Fixes: a9ce82f744dc ("i40e: Enable 'channel' mode in mqprio for TC configs") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04i40e: Fix queue-to-TC mapping on TxJedrzej Jagielski3-0/+53
[ Upstream commit 89ec1f0886c127c7e41ac61a6b6d539f4fb2510b ] In SW DCB mode the packets sent receive incorrect UP tags. They are constructed correctly and put into tx_ring, but UP is later remapped by HW on the basis of TCTUPR register contents according to Tx queue selected, and BW used is consistent with the new UP values. This is caused by Tx queue selection in kernel not taking into account DCB configuration. This patch fixes the issue by implementing the ndo_select_queue NDO callback. Fixes: fd0a05ce74ef ("i40e: transmit, receive, and NAPI") Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04i40e: Fix firmware LLDP agent related warningArkadiusz Kubalewski1-0/+4
[ Upstream commit 71d6fdba4b2d82fdd883fec31dee77fbcf59773a ] Make warning meaningful for the user. Previously the trace: "Starting FW LLDP agent failed: error: I40E_ERR_ADMIN_QUEUE_ERROR, I40E_AQ_RC_EAGAIN" was produced when user tried to start Firmware LLDP agent, just after it was stopped with sequence: ethtool --set-priv-flags <dev> disable-fw-lldp on ethtool --set-priv-flags <dev> disable-fw-lldp off (without any delay between the commands) At that point the firmware is still processing stop command, the behavior is expected. Fixes: c1041d070437 ("i40e: Missing response checks in driver when starting/stopping FW LLDP") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04i40e: Fix logic of disabling queuesArkadiusz Kubalewski1-24/+34
[ Upstream commit 65662a8dcdd01342b71ee44234bcfd0162e195af ] Correct the message flow between driver and firmware when disabling queues. Previously in case of PF reset (due to required reinit after reconfig), the error like: "VSI seid 397 Tx ring 60 disable timeout" could show up occasionally. The error was not a real issue of hardware or firmware, it was caused by wrong sequence of messages invoked by the driver. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04NIU: fix incorrect error return, missed in previous revertPaul Jakma1-1/+2
commit 15bbf8bb4d4ab87108ecf5f4155ec8ffa3c141d6 upstream. Commit 7930742d6, reverting 26fd962, missed out on reverting an incorrect change to a return value. The niu_pci_vpd_scan_props(..) == 1 case appears to be a normal path - treating it as an error and return -EINVAL was breaking VPD_SCAN and causing the driver to fail to load. Fix, so my Neptune card works again. Cc: Kangjie Lu <kjlu@umn.edu> Cc: Shannon Nelson <shannon.lee.nelson@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> Fixes: 7930742d ('Revert "niu: fix missing checks of niu_pci_eeprom_read"') Signed-off-by: Paul Jakma <paul@jakma.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-04can: esd_usb2: fix memory leakPavel Skripkin1-1/+15
commit 928150fad41ba16df7fcc9f7f945747d0f56cbb6 upstream. In esd_usb2_setup_rx_urbs() MAX_RX_URBS coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see esd_usb2_setup_rx_urbs) and this flag cannot be used with coherent buffers. So, all allocated buffers should be freed with usb_free_coherent() explicitly. Side note: This code looks like a copy-paste of other can drivers. The same patch was applied to mcba_usb driver and it works nice with real hardware. There is no change in functionality, only clean-up code for coherent buffers. Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device") Link: https://lore.kernel.org/r/b31b096926dcb35998ad0271aac4b51770ca7cc8.1627404470.git.paskripkin@gmail.com Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-04can: ems_usb: fix memory leakPavel Skripkin1-1/+13
commit 9969e3c5f40c166e3396acc36c34f9de502929f6 upstream. In ems_usb_start() MAX_RX_URBS coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see ems_usb_start) and this flag cannot be used with coherent buffers. So, all allocated buffers should be freed with usb_free_coherent() explicitly. Side note: This code looks like a copy-paste of other can drivers. The same patch was applied to mcba_usb driver and it works nice with real hardware. There is no change in functionality, only clean-up code for coherent buffers. Fixes: 702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface") Link: https://lore.kernel.org/r/59aa9fbc9a8cbf9af2bbd2f61a659c480b415800.1627404470.git.paskripkin@gmail.com Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-04can: usb_8dev: fix memory leakPavel Skripkin1-2/+13
commit 0e865f0c31928d6a313269ef624907eec55287c4 upstream. In usb_8dev_start() MAX_RX_URBS coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see usb_8dev_start) and this flag cannot be used with coherent buffers. So, all allocated buffers should be freed with usb_free_coherent() explicitly. Side note: This code looks like a copy-paste of other can drivers. The same patch was applied to mcba_usb driver and it works nice with real hardware. There is no change in functionality, only clean-up code for coherent buffers. Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices") Link: https://lore.kernel.org/r/d39b458cd425a1cf7f512f340224e6e9563b07bd.1627404470.git.paskripkin@gmail.com Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-04can: mcba_usb_start(): add missing urb->transfer_dma initializationPavel Skripkin1-0/+2
commit fc43fb69a7af92839551f99c1a96a37b77b3ae7a upstream. Yasushi reported, that his Microchip CAN Analyzer stopped working since commit 91c02557174b ("can: mcba_usb: fix memory leak in mcba_usb"). The problem was in missing urb->transfer_dma initialization. In my previous patch to this driver I refactored mcba_usb_start() code to avoid leaking usb coherent buffers. To archive it, I passed local stack variable to usb_alloc_coherent() and then saved it to private array to correctly free all coherent buffers on ->close() call. But I forgot to initialize urb->transfer_dma with variable passed to usb_alloc_coherent(). All of this was causing device to not work, since dma addr 0 is not valid and following log can be found on bug report page, which points exactly to problem described above. | DMAR: [DMA Write] Request device [00:14.0] PASID ffffffff fault addr 0 [fault reason 05] PTE Write access is not set Fixes: 91c02557174b ("can: mcba_usb: fix memory leak in mcba_usb") Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=990850 Link: https://lore.kernel.org/r/20210725103630.23864-1-paskripkin@gmail.com Cc: linux-stable <stable@vger.kernel.org> Reported-by: Yasushi SHOJI <yasushi.shoji@gmail.com> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Tested-by: Yasushi SHOJI <yashi@spacecubics.com> [mkl: fixed typos in commit message - thanks Yasushi SHOJI] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28net: bcmgenet: ensure EXT_ENERGY_DET_MASK is clearDoug Berger2-20/+2
commit 5a3c680aa2c12c90c44af383fe6882a39875ab81 upstream. Setting the EXT_ENERGY_DET_MASK bit allows the port energy detection logic of the internal PHY to prevent the system from sleeping. Some internal PHYs will report that energy is detected when the network interface is closed which can prevent the system from going to sleep if WoL is enabled when the interface is brought down. Since the driver does not support waking the system on this logic, this commit clears the bit whenever the internal PHY is powered up and the other logic for manipulating the bit is removed since it serves no useful function. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28net: dsa: mv88e6xxx: use correct .stats_set_histogram() on TopazMarek Behún1-2/+2
commit 11527f3c4725640e6c40a2b7654e303f45e82a6c upstream. Commit 40cff8fca9e3 ("net: dsa: mv88e6xxx: Fix stats histogram mode") introduced wrong .stats_set_histogram() method for Topaz family. The Peridot method should be used instead. Signed-off-by: Marek Behún <kabel@kernel.org> Fixes: 40cff8fca9e3 ("net: dsa: mv88e6xxx: Fix stats histogram mode") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 21:44:52 +0300