summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2021-11-17mwifiex: Run SET_BSS_MODE when changing from P2P to STATION vif-typeJonas Dreßler1-18/+4
[ Upstream commit c2e9666cdffd347460a2b17988db4cfaf2a68fb9 ] We currently handle changing from the P2P to the STATION virtual interface type slightly different than changing from P2P to ADHOC: When changing to STATION, we don't send the SET_BSS_MODE command. We do send that command on all other type-changes though, and it probably makes sense to send the command since after all we just changed our BSS_MODE. Looking at prior changes to this part of the code, it seems that this is simply a leftover from old refactorings. Since sending the SET_BSS_MODE command is the only difference between mwifiex_change_vif_to_sta_adhoc() and the current code, we can now use mwifiex_change_vif_to_sta_adhoc() for both switching to ADHOC and STATION interface type. This does not fix any particular bug and just "looked right", so there's a small chance it might be a regression. Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210914195909.36035-4-verdre@v0yd.nl Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17rsi: Fix module dev_oper_mode parameter descriptionMarek Vasut3-8/+13
commit 31f97cf9f0c31143a2a6fcc89c4a1286ce20157e upstream. The module parameters are missing dev_oper_mode 12, BT classic alone, add it. Moreover, the parameters encode newlines, which ends up being printed malformed e.g. by modinfo, so fix that too. However, the module parameter string is duplicated in both USB and SDIO modules and the dev_oper_mode mode enumeration in those module parameters is a duplicate of macros used by the driver. Furthermore, the enumeration is confusing. So, deduplicate the module parameter string and use __stringify() to encode the correct mode enumeration values into the module parameter string. Finally, replace 'Wi-Fi' with 'Wi-Fi alone' and 'BT' with 'BT classic alone' to clarify what those modes really mean. Fixes: 898b255339310 ("rsi: add module parameter operating mode") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com> Cc: Angus Ainslie <angus@akkea.ca> Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Karun Eagalapati <karun256@gmail.com> Cc: Martin Fuzzey <martin.fuzzey@flowbird.group> Cc: Martin Kepplinger <martink@posteo.de> Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: netdev@vger.kernel.org Cc: <stable@vger.kernel.org> # 4.17+ Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210916144245.10181-1-marex@denx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-17rsi: fix rate mask set leading to P2P failureMartin Fuzzey4-65/+50
commit b515d097053a71d624e0c5840b42cd4caa653941 upstream. P2P client mode was only working the first time. On subsequent connection attempts the group was successfully created but no data was sent (no transmitted data packets were seen with a sniffer). The reason for this was that the hardware was being configured in fixed rate mode with rate RSI_RATE_1 (1Mbps) which is not valid in the 5GHz band. In P2P mode wpa_supplicant uses NL80211_CMD_SET_TX_BITRATE_MASK to disallow the 11b rates in the 2.4GHz band which updated common->fixedrate_mask. rsi_set_min_rate() then used the fixedrate_mask to calculate the minimum allowed rate, or 0xffff = auto if none was found. However that calculation did not account for the different rate sets allowed in the different bands leading to the error. Fixing set_min_rate() would result in 6Mb/s being used all the time which is not what we want either. The reason the problem did not occur on the first connection is that rsi_mac80211_set_rate_mask() only updated the fixedrate_mask for the *current* band. When it was called that was still 2.4GHz as the switch is done later. So the when set_min_rate() was subsequently called after the switch to 5GHz it still had a mask of zero, leading to defaulting to auto mode. Fix this by differentiating the case of a single rate being requested, in which case the hardware will be used in fixed rate mode with just that rate, and multiple rates being requested, in which case we remain in auto mode but the firmware rate selection algorithm is configured with a restricted set of rates. Fixes: dad0d04fa7ba ("rsi: Add RS9113 wireless driver") Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> CC: stable@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1630337206-12410-4-git-send-email-martin.fuzzey@flowbird.group Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-17rsi: fix key enabled check causing unwanted encryption for vap_id > 0Martin Fuzzey3-1/+4
commit 99ac6018821253ec67f466086afb63fc18ea48e2 upstream. My previous patch checked if encryption should be enabled by directly checking info->control.hw_key (like the downstream driver). However that missed that the control and driver_info members of struct ieee80211_tx_info are union fields. Due to this when rsi_core_xmit() updates fields in "tx_params" (driver_info) it can overwrite the control.hw_key, causing the result of the later test to be incorrect. With the current structure layout the first byte of control.hw_key is overlayed with the vap_id so, since we only test if control.hw_key is NULL / non NULL, a non zero vap_id will incorrectly enable encryption. In basic STA and AP modes the vap_id is always zero so it works but in P2P client mode a second VIF is created causing vap_id to be non zero and hence encryption to be enabled before keys have been set. Fix this by extracting the key presence flag to a new field in the driver private tx_params structure and populating it first. Fixes: 314538041b56 ("rsi: fix AP mode with WPA failure due to encrypted EAPOL") Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> CC: stable@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1630337206-12410-3-git-send-email-martin.fuzzey@flowbird.group Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-17rsi: fix occasional initialisation failure with BT coexMartin Fuzzey3-3/+18
commit 9b14ed6e11b72dd4806535449ca6c6962cb2369d upstream. When BT coexistence is enabled (eg oper mode 13, which is the default) the initialisation on startup sometimes silently fails. In a normal initialisation we see usb 1-1.3: Product: Wireless USB Network Module usb 1-1.3: Manufacturer: Redpine Signals, Inc. usb 1-1.3: SerialNumber: 000000000001 rsi_91x: rsi_probe: Initialized os intf ops rsi_91x: rsi_load_9116_firmware: Loading chunk 0 rsi_91x: rsi_load_9116_firmware: Loading chunk 1 rsi_91x: rsi_load_9116_firmware: Loading chunk 2 rsi_91x: Max Stations Allowed = 1 But sometimes the last log is missing and the wlan net device is not created. Running a userspace loop that resets the hardware via a GPIO shows the problem occurring ~5/100 resets. The problem does not occur in oper mode 1 (wifi only). Adding logs shows that the initialisation state machine requests a MAC reset via rsi_send_reset_mac() but the firmware does not reply, leading to the initialisation sequence being incomplete. Fix this by delaying attaching the BT adapter until the wifi initialisation has completed. With this applied I have done > 300 reset loops with no errors. Fixes: 716b840c7641 ("rsi: handle BT traffic in driver") Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> CC: stable@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1630337206-12410-2-git-send-email-martin.fuzzey@flowbird.group Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-17wcn36xx: handle connection loss indicationBenjamin Li1-11/+33
commit d6dbce453b19c64b96f3e927b10230f9a704b504 upstream. Firmware sends delete_sta_context_ind when it detects the AP has gone away in STA mode. Right now the handler for that indication only handles AP mode; fix it to also handle STA mode. Cc: stable@vger.kernel.org Signed-off-by: Benjamin Li <benl@squareup.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210901180606.11686-1-benl@squareup.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-17mwifiex: Read a PCI register after writing the TX ring write pointerJonas Dreßler1-0/+8
commit e5f4eb8223aa740237cd463246a7debcddf4eda1 upstream. On the 88W8897 PCIe+USB card the firmware randomly crashes after setting the TX ring write pointer. The issue is present in the latest firmware version 15.68.19.p21 of the PCIe+USB card. Those firmware crashes can be worked around by reading any PCI register of the card after setting that register, so read the PCI_VENDOR_ID register here. The reason this works is probably because we keep the bus from entering an ASPM state for a bit longer, because that's what causes the cards firmware to crash. This fixes a bug where during RX/TX traffic and with ASPM L1 substates enabled (the specific substates where the issue happens appear to be platform dependent), the firmware crashes and eventually a command timeout appears in the logs. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=109681 Cc: stable@vger.kernel.org Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211011133224.15561-2-verdre@v0yd.nl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-17wcn36xx: Fix HT40 capability for 2Ghz bandLoic Poulain1-1/+3
commit 960ae77f25631bbe4e3aafefe209b52e044baf31 upstream. All wcn36xx controllers are supposed to support HT40 (and SGI40), This doubles the maximum bitrate/throughput with compatible APs. Tested with wcn3620 & wcn3680B. Cc: stable@vger.kernel.org Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware") Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1634737133-22336-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-17rtl8187: fix control-message timeoutsJohan Hovold1-7/+7
commit 2e9be536a213e838daed6ba42024dd68954ac061 upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 605bebe23bf6 ("[PATCH] Add rtl8187 wireless driver") Cc: stable@vger.kernel.org # 2.6.23 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211025120522.6045-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-17ath10k: fix division by zero in send pathJohan Hovold1-0/+5
commit a006acb931317aad3a8dd41333ebb0453caf49b8 upstream. Add the missing endpoint max-packet sanity check to probe() to avoid division by zero in ath10k_usb_hif_tx_sg() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Fixes: 4db66499df91 ("ath10k: add initial USB support") Cc: stable@vger.kernel.org # 4.14 Cc: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211027080819.6675-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-17ath10k: fix control-message timeoutJohan Hovold1-1/+1
commit 5286132324230168d3fab6ffc16bfd7de85bdfb4 upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 4db66499df91 ("ath10k: add initial USB support") Cc: stable@vger.kernel.org # 4.14 Cc: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211025120522.6045-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-17ath6kl: fix control-message timeoutJohan Hovold1-1/+1
commit a066d28a7e729f808a3e6eff22e70c003091544e upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 241b128b6b69 ("ath6kl: add back beginnings of USB support") Cc: stable@vger.kernel.org # 3.4 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211025120522.6045-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-17ath6kl: fix division by zero in send pathJohan Hovold1-0/+5
commit c1b9ca365deae667192be9fe24db244919971234 upstream. Add the missing endpoint max-packet sanity check to probe() to avoid division by zero in ath10k_usb_hif_tx_sg() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Fixes: 9cbee358687e ("ath6kl: add full USB support") Cc: stable@vger.kernel.org # 3.5 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211027080819.6675-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-17mwifiex: fix division by zero in fw download pathJohan Hovold1-0/+16
commit 89f8765a11d8df49296d92c404067f9b5c58ee26 upstream. Add the missing endpoint sanity checks to probe() to avoid division by zero in mwifiex_write_data_sync() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Only add checks for the firmware-download boot stage, which require both command endpoints, for now. The driver looks like it will handle a missing endpoint during normal operation without oopsing, albeit not very gracefully as it will try to submit URBs to the default pipe and fail. Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Fixes: 4daffe354366 ("mwifiex: add support for Marvell USB8797 chipset") Cc: stable@vger.kernel.org # 3.5 Cc: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211027080819.6675-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-17nfp: bpf: relax prog rejection for mtu check through max_pkt_offsetYu Xiao3-9/+26
[ Upstream commit 90a881fc352a953f1c8beb61977a2db0818157d4 ] MTU change is refused whenever the value of new MTU is bigger than the max packet bytes that fits in NFP Cluster Target Memory (CTM). However, an eBPF program doesn't always need to access the whole packet data. The maximum direct packet access (DPA) offset has always been caculated by verifier and stored in the max_pkt_offset field of prog aux data. Signed-off-by: Yu Xiao <yu.xiao@corigine.com> Reviewed-by: Yinjun Zhang <yinjun.zhang@corigine.com> Reviewed-by: Niklas Soderlund <niklas.soderlund@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17vmxnet3: do not stop tx queues after netif_device_detach()Dongli Zhang1-1/+0
[ Upstream commit 9159f102402a64ac85e676b75cc1f9c62c5b4b73 ] The netif_device_detach() conditionally stops all tx queues if the queues are running. There is no need to call netif_tx_stop_all_queues() again. Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17r8169: Add device 10ec:8162 to driver r8169Janghyub Seo1-0/+1
[ Upstream commit 72f898ca0ab85fde6facf78b14d9f67a4a7b32d1 ] This patch makes the driver r8169 pick up device Realtek Semiconductor Co. , Ltd. Device [10ec:8162]. Signed-off-by: Janghyub Seo <jhyub06@gmail.com> Suggested-by: Rushab Shah <rushabshah32@gmail.com> Link: https://lore.kernel.org/r/1635231849296.1489250046.441294000@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17xen/netfront: stop tx queues during live migrationDongli Zhang1-0/+8
[ Upstream commit 042b2046d0f05cf8124c26ff65dbb6148a4404fb ] The tx queues are not stopped during the live migration. As a result, the ndo_start_xmit() may access netfront_info->queues which is freed by talk_to_netback()->xennet_destroy_queues(). This patch is to netif_device_detach() at the beginning of xen-netfront resuming, and netif_device_attach() at the end of resuming. CPU A CPU B talk_to_netback() -> if (info->queues) xennet_destroy_queues(info); to free netfront_info->queues xennet_start_xmit() to access netfront_info->queues -> err = xennet_create_queues(info, &num_queues); The idea is borrowed from virtio-net. Cc: Joe Jin <joe.jin@oracle.com> Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17sfc: Don't use netif_info before net_device setupErik Ekman2-3/+3
[ Upstream commit bf6abf345dfa77786aca554bc58c64bd428ecb1d ] Use pci_info instead to avoid unnamed/uninitialized noise: [197088.688729] sfc 0000:01:00.0: Solarflare NIC detected [197088.690333] sfc 0000:01:00.0: Part Number : SFN5122F [197088.729061] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no SR-IOV VFs probed [197088.729071] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no PTP support Inspired by fa44821a4ddd ("sfc: don't use netif_info et al before net_device is registered") from Heiner Kallweit. Signed-off-by: Erik Ekman <erik@kryo.se> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17cavium: Fix return values of the probe functionZheyu Ma1-2/+2
[ Upstream commit c69b2f46876825c726bd8a97c7fa852d8932bc32 ] During the process of driver probing, the probe function should return < 0 for failure, otherwise, the kernel will treat value > 0 as success. Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17cavium: Return negative value when pci_alloc_irq_vectors() failsZheyu Ma1-1/+1
[ Upstream commit b2cddb44bddc1a9c5949a978bb454bba863264db ] During the process of driver probing, the probe function should return < 0 for failure, otherwise, the kernel will treat value > 0 as success. Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-12rsi: fix control-message timeoutJohan Hovold1-1/+1
commit 541fd20c3ce5b0bc39f0c6a52414b6b92416831c upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Use the common control-message timeout define for the five-second timeout. Fixes: dad0d04fa7ba ("rsi: Add RS9113 wireless driver") Cc: stable@vger.kernel.org # 3.15 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211025120522.6045-5-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-06sfc: Fix reading non-legacy supported link modesErik Ekman1-8/+2
commit 041c61488236a5a84789083e3d9f0a51139b6edf upstream. Everything except the first 32 bits was lost when the pause flags were added. This makes the 50000baseCR2 mode flag (bit 34) not appear. I have tested this with a 10G card (SFN5122F-R7) by modifying it to return a non-legacy link mode (10000baseCR). Signed-off-by: Erik Ekman <erik@kryo.se> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-06net: ethernet: microchip: lan743x: Fix skb allocation failureYuiko Oshino1-4/+6
commit e8684db191e4164f3f5f3ad7dec04a6734c25f1c upstream. The driver allocates skb during ndo_open with GFP_ATOMIC which has high chance of failure when there are multiple instances. GFP_KERNEL is enough while open and use GFP_ATOMIC only from interrupt context. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-06vrf: Revert "Reset skb conntrack connection..."Eugene Crosser1-4/+0
commit 55161e67d44fdd23900be166a81e996abd6e3be9 upstream. This reverts commit 09e856d54bda5f288ef8437a90ab2b9b3eab83d1. When an interface is enslaved in a VRF, prerouting conntrack hook is called twice: once in the context of the original input interface, and once in the context of the VRF interface. If no special precausions are taken, this leads to creation of two conntrack entries instead of one, and breaks SNAT. Commit above was intended to avoid creation of extra conntrack entries when input interface is enslaved in a VRF. It did so by resetting conntrack related data associated with the skb when it enters VRF context. However it breaks netfilter operation. Imagine a use case when conntrack zone must be assigned based on the original input interface, rather than VRF interface (that would make original interfaces indistinguishable). One could create netfilter rules similar to these: chain rawprerouting { type filter hook prerouting priority raw; iif realiface1 ct zone set 1 return iif realiface2 ct zone set 2 return } This works before the mentioned commit, but not after: zone assignment is "forgotten", and any subsequent NAT or filtering that is dependent on the conntrack zone does not work. Here is a reproducer script that demonstrates the difference in behaviour. ========== #!/bin/sh # This script demonstrates unexpected change of nftables behaviour # caused by commit 09e856d54bda5f28 ""vrf: Reset skb conntrack # connection on VRF rcv" # https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=09e856d54bda5f288ef8437a90ab2b9b3eab83d1 # # Before the commit, it was possible to assign conntrack zone to a # packet (or mark it for `notracking`) in the prerouting chanin, raw # priority, based on the `iif` (interface from which the packet # arrived). # After the change, # if the interface is enslaved in a VRF, such # assignment is lost. Instead, assignment based on the `iif` matching # the VRF master interface is honored. Thus it is impossible to # distinguish packets based on the original interface. # # This script demonstrates this change of behaviour: conntrack zone 1 # or 2 is assigned depending on the match with the original interface # or the vrf master interface. It can be observed that conntrack entry # appears in different zone in the kernel versions before and after # the commit. IPIN=172.30.30.1 IPOUT=172.30.30.2 PFXL=30 ip li sh vein >/dev/null 2>&1 && ip li del vein ip li sh tvrf >/dev/null 2>&1 && ip li del tvrf nft list table testct >/dev/null 2>&1 && nft delete table testct ip li add vein type veth peer veout ip li add tvrf type vrf table 9876 ip li set veout master tvrf ip li set vein up ip li set veout up ip li set tvrf up /sbin/sysctl -w net.ipv4.conf.veout.accept_local=1 /sbin/sysctl -w net.ipv4.conf.veout.rp_filter=0 ip addr add $IPIN/$PFXL dev vein ip addr add $IPOUT/$PFXL dev veout nft -f - <<__END__ table testct { chain rawpre { type filter hook prerouting priority raw; iif { veout, tvrf } meta nftrace set 1 iif veout ct zone set 1 return iif tvrf ct zone set 2 return notrack } chain rawout { type filter hook output priority raw; notrack } } __END__ uname -rv conntrack -F ping -W 1 -c 1 -I vein $IPOUT conntrack -L Signed-off-by: Eugene Crosser <crosser@average.org> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Florian Westphal <fw@strlen.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-02net: use netif_is_bridge_port() to check for IFF_BRIDGE_PORTJulian Wiedmann2-2/+2
[ Upstream commit 2e92a2d0e450740ebe7e7a816162327ad1fde94b ] Trivial cleanup, so that all bridge port-specific code can be found in one go. CC: Johannes Berg <johannes@sipsolutions.net> CC: Roopa Prabhu <roopa@cumulusnetworks.com> CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-02phy: phy_start_aneg: Add an unlocked versionAndrew Lunn1-6/+24
commit 707293a56f95f8e7e0cfae008010c7933fb68973 upstream. Split phy_start_aneg into a wrapper which takes the PHY lock, and a helper doing the real work. This will be needed when phy_ethtook_ksettings_set takes the lock. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-02phy: phy_ethtool_ksettings_get: Lock the phy for consistencyAndrew Lunn1-0/+2
commit c10a485c3de5ccbf1fff65a382cebcb2730c6b06 upstream. The PHY structure should be locked while copying information out if it, otherwise there is no guarantee of self consistency. Without the lock the PHY state machine could be updating the structure. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-02net: nxp: lpc_eth.c: avoid hang when bringing interface downTrevor Woerner1-3/+2
commit ace19b992436a257d9a793672e57abc28fe83e2e upstream. A hard hang is observed whenever the ethernet interface is brought down. If the PHY is stopped before the LPC core block is reset, the SoC will hang. Comparing lpc_eth_close() and lpc_eth_open() I re-arranged the ordering of the functions calls in lpc_eth_close() to reset the hardware before stopping the PHY. Fixes: b7370112f519 ("lpc32xx: Added ethernet driver") Signed-off-by: Trevor Woerner <twoerner@gmail.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-02net: ethernet: microchip: lan743x: Fix dma allocation failure by using ↵Yuiko Oshino1-0/+20
dma_set_mask_and_coherent commit 95a359c9553342d36d408d35331ff0bfce75272f upstream. The dma failure was reported in the raspberry pi github (issue #4117). https://github.com/raspberrypi/linux/issues/4117 The use of dma_set_mask_and_coherent fixes the issue. Tested on 32/64-bit raspberry pi CM4 and 64-bit ubuntu x86 PC with EVB-LAN7430. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-02net: ethernet: microchip: lan743x: Fix driver crash when lan743x_pm_resume failsYuiko Oshino1-0/+2
commit d6423d2ec39cce2bfca418c81ef51792891576bc upstream. The driver needs to clean up and return when the initialization fails on resume. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-02net: lan78xx: fix division by zero in send pathJohan Hovold1-0/+6
commit db6c3c064f5d55fa9969f33eafca3cdbefbb3541 upstream. Add the missing endpoint max-packet sanity check to probe() to avoid division by zero in lan78xx_tx_bh() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Cc: stable@vger.kernel.org # 4.3 Cc: Woojung.Huh@microchip.com <Woojung.Huh@microchip.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-02Revert "net: mdiobus: Fix memory leak in __mdiobus_register"Pavel Skripkin1-1/+0
commit 10eff1f5788b6ffac212c254e2f3666219576889 upstream. This reverts commit ab609f25d19858513919369ff3d9a63c02cd9e2e. This patch is correct in the sense that we _should_ call device_put() in case of device_register() failure, but the problem in this code is more vast. We need to set bus->state to UNMDIOBUS_REGISTERED before calling device_register() to correctly release the device in mdiobus_free(). This patch prevents us from doing it, since in case of device_register() failure put_device() will be called 2 times and it will cause UAF or something else. Also, Reported-by: tag in revered commit was wrong, since syzbot reported different leak in same function. Link: https://lore.kernel.org/netdev/20210928092657.GI2048@kadam/ Acked-by: Yanfei Xu <yanfei.xu@windriver.com> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Link: https://lore.kernel.org/r/f12fb1faa4eccf0f355788225335eb4309ff2599.1633024062.git.paskripkin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-02usbnet: fix error return code in usbnet_probe()Wang Hai1-0/+1
commit 6f7c88691191e6c52ef2543d6f1da8d360b27a24 upstream. Return error code if usb_maxpacket() returns 0 in usbnet_probe() Fixes: 397430b50a36 ("usbnet: sanity check for maxpacket") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Reviewed-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211026124015.3025136-1-wanghai38@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-02usbnet: sanity check for maxpacketOliver Neukum1-0/+4
commit 397430b50a363d8b7bdda00522123f82df6adc5e upstream. maxpacket of 0 makes no sense and oopses as we need to divide by it. Give up. V2: fixed typo in log and stylistic issues Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+76bb1d34ffa0adc03baa@syzkaller.appspotmail.com Reviewed-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211021122944.21816-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-27net: mdiobus: Fix memory leak in __mdiobus_registerYanfei Xu1-0/+1
commit ab609f25d19858513919369ff3d9a63c02cd9e2e upstream. Once device_register() failed, we should call put_device() to decrement reference count for cleanup. Or it will cause memory leak. BUG: memory leak unreferenced object 0xffff888114032e00 (size 256): comm "kworker/1:3", pid 2960, jiffies 4294943572 (age 15.920s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 08 2e 03 14 81 88 ff ff ................ 08 2e 03 14 81 88 ff ff 90 76 65 82 ff ff ff ff .........ve..... backtrace: [<ffffffff8265cfab>] kmalloc include/linux/slab.h:591 [inline] [<ffffffff8265cfab>] kzalloc include/linux/slab.h:721 [inline] [<ffffffff8265cfab>] device_private_init drivers/base/core.c:3203 [inline] [<ffffffff8265cfab>] device_add+0x89b/0xdf0 drivers/base/core.c:3253 [<ffffffff828dd643>] __mdiobus_register+0xc3/0x450 drivers/net/phy/mdio_bus.c:537 [<ffffffff828cb835>] __devm_mdiobus_register+0x75/0xf0 drivers/net/phy/mdio_devres.c:87 [<ffffffff82b92a00>] ax88772_init_mdio drivers/net/usb/asix_devices.c:676 [inline] [<ffffffff82b92a00>] ax88772_bind+0x330/0x480 drivers/net/usb/asix_devices.c:786 [<ffffffff82baa33f>] usbnet_probe+0x3ff/0xdf0 drivers/net/usb/usbnet.c:1745 [<ffffffff82c36e17>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<ffffffff82661d17>] call_driver_probe drivers/base/dd.c:517 [inline] [<ffffffff82661d17>] really_probe.part.0+0xe7/0x380 drivers/base/dd.c:596 [<ffffffff826620bc>] really_probe drivers/base/dd.c:558 [inline] [<ffffffff826620bc>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:751 [<ffffffff826621ba>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:781 [<ffffffff82662a26>] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:898 [<ffffffff8265eca7>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427 [<ffffffff826625a2>] __device_attach+0x122/0x260 drivers/base/dd.c:969 [<ffffffff82660916>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:487 [<ffffffff8265cd0b>] device_add+0x5fb/0xdf0 drivers/base/core.c:3359 [<ffffffff82c343b9>] usb_set_configuration+0x9d9/0xb90 drivers/usb/core/message.c:2170 [<ffffffff82c4473c>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238 BUG: memory leak unreferenced object 0xffff888116f06900 (size 32): comm "kworker/0:2", pid 2670, jiffies 4294944448 (age 7.160s) hex dump (first 32 bytes): 75 73 62 2d 30 30 31 3a 30 30 33 00 00 00 00 00 usb-001:003..... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81484516>] kstrdup+0x36/0x70 mm/util.c:60 [<ffffffff814845a3>] kstrdup_const+0x53/0x80 mm/util.c:83 [<ffffffff82296ba2>] kvasprintf_const+0xc2/0x110 lib/kasprintf.c:48 [<ffffffff82358d4b>] kobject_set_name_vargs+0x3b/0xe0 lib/kobject.c:289 [<ffffffff826575f3>] dev_set_name+0x63/0x90 drivers/base/core.c:3147 [<ffffffff828dd63b>] __mdiobus_register+0xbb/0x450 drivers/net/phy/mdio_bus.c:535 [<ffffffff828cb835>] __devm_mdiobus_register+0x75/0xf0 drivers/net/phy/mdio_devres.c:87 [<ffffffff82b92a00>] ax88772_init_mdio drivers/net/usb/asix_devices.c:676 [inline] [<ffffffff82b92a00>] ax88772_bind+0x330/0x480 drivers/net/usb/asix_devices.c:786 [<ffffffff82baa33f>] usbnet_probe+0x3ff/0xdf0 drivers/net/usb/usbnet.c:1745 [<ffffffff82c36e17>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<ffffffff82661d17>] call_driver_probe drivers/base/dd.c:517 [inline] [<ffffffff82661d17>] really_probe.part.0+0xe7/0x380 drivers/base/dd.c:596 [<ffffffff826620bc>] really_probe drivers/base/dd.c:558 [inline] [<ffffffff826620bc>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:751 [<ffffffff826621ba>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:781 [<ffffffff82662a26>] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:898 [<ffffffff8265eca7>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427 [<ffffffff826625a2>] __device_attach+0x122/0x260 drivers/base/dd.c:969 Reported-by: syzbot+398e7dc692ddbbb4cfec@syzkaller.appspotmail.com Signed-off-by: Yanfei Xu <yanfei.xu@windriver.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-27net: stmmac: add support for dwmac 3.40aHerve Codina2-0/+9
[ Upstream commit 9cb1d19f47fafad7dcf7c8564e633440c946cfd7 ] dwmac 3.40a is an old ip version that can be found on SPEAr3xx soc. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-27can: peak_pci: peak_pci_remove(): fix UAFZheyu Ma1-5/+4
commit 949fe9b35570361bc6ee2652f89a0561b26eec98 upstream. When remove the module peek_pci, referencing 'chan' again after releasing 'dev' will cause UAF. Fix this by releasing 'dev' later. The following log reveals it: [ 35.961814 ] BUG: KASAN: use-after-free in peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.963414 ] Read of size 8 at addr ffff888136998ee8 by task modprobe/5537 [ 35.965513 ] Call Trace: [ 35.965718 ] dump_stack_lvl+0xa8/0xd1 [ 35.966028 ] print_address_description+0x87/0x3b0 [ 35.966420 ] kasan_report+0x172/0x1c0 [ 35.966725 ] ? peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.967137 ] ? trace_irq_enable_rcuidle+0x10/0x170 [ 35.967529 ] ? peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.967945 ] __asan_report_load8_noabort+0x14/0x20 [ 35.968346 ] peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.968752 ] pci_device_remove+0xa9/0x250 Fixes: e6d9c80b7ca1 ("can: peak_pci: add support of some new PEAK-System PCI cards") Link: https://lore.kernel.org/all/1634192913-15639-1-git-send-email-zheyuma97@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-27can: peak_usb: pcan_usb_fd_decode_status(): fix back to ERROR_ACTIVE state ↵Stephane Grosjean1-3/+2
notification commit 3d031abc7e7249573148871180c28ecedb5e27df upstream. This corrects the lack of notification of a return to ERROR_ACTIVE state for USB - CANFD devices from PEAK-System. Fixes: 0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters") Link: https://lore.kernel.org/all/20210929142111.55757-1-s.grosjean@peak-system.com Cc: stable@vger.kernel.org Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-27can: rcar_can: fix suspend/resumeYoshihiro Shimoda1-8/+12
commit f7c05c3987dcfde9a4e8c2d533db013fabebca0d upstream. If the driver was not opened, rcar_can_suspend() should not call clk_disable() because the clock was not enabled. Fixes: fd1159318e55 ("can: add Renesas R-Car CAN driver") Link: https://lore.kernel.org/all/20210924075556.223685-1-yoshihiro.shimoda.uh@renesas.com Cc: stable@vger.kernel.org Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Ayumi Nakamichi <ayumi.nakamichi.kf@renesas.com> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Tested-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-27net: enetc: fix ethtool counter name for PM0_TERRVladimir Oltean1-1/+1
[ Upstream commit fb8dc5fc8cbdfd62ecd16493848aee2f42ed84d9 ] There are two counters named "MAC tx frames", one of them is actually incorrect. The correct name for that counter should be "MAC tx error frames", which is symmetric to the existing "MAC rx error frames". Fixes: 16eb4c85c964 ("enetc: Add ethtool statistics") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: <Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20211020165206.1069889-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-27net: stmmac: Fix E2E delay mechanismKurt Kanzenbach1-1/+1
[ Upstream commit 3cb958027cb8b78d3ee639ce9af54c2ef1bf964f ] When utilizing End to End delay mechanism, the following error messages show up: |root@ehl1:~# ptp4l --tx_timestamp_timeout=50 -H -i eno2 -E -m |ptp4l[950.573]: selected /dev/ptp3 as PTP clock |ptp4l[950.586]: port 1: INITIALIZING to LISTENING on INIT_COMPLETE |ptp4l[950.586]: port 0: INITIALIZING to LISTENING on INIT_COMPLETE |ptp4l[952.879]: port 1: new foreign master 001395.fffe.4897b4-1 |ptp4l[956.879]: selected best master clock 001395.fffe.4897b4 |ptp4l[956.879]: port 1: assuming the grand master role |ptp4l[956.879]: port 1: LISTENING to GRAND_MASTER on RS_GRAND_MASTER |ptp4l[962.017]: port 1: received DELAY_REQ without timestamp |ptp4l[962.273]: port 1: received DELAY_REQ without timestamp |ptp4l[963.090]: port 1: received DELAY_REQ without timestamp Commit f2fb6b6275eb ("net: stmmac: enable timestamp snapshot for required PTP packets in dwmac v5.10a") already addresses this problem for the dwmac v5.10. However, same holds true for all dwmacs above version v4.10. Correct the check accordingly. Afterwards everything works as expected. Tested on Intel Atom(R) x6414RE Processor. Fixes: 14f347334bf2 ("net: stmmac: Correctly take timestamp for PTPv2") Fixes: f2fb6b6275eb ("net: stmmac: enable timestamp snapshot for required PTP packets in dwmac v5.10a") Suggested-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-27net: hns3: disable sriov before unload hclge layerPeng Li3-0/+23
[ Upstream commit 0dd8a25f355b4df2d41c08df1716340854c7d4c5 ] HNS3 driver includes hns3.ko, hnae3.ko and hclge.ko. hns3.ko includes network stack and pci_driver, hclge.ko includes HW device action, algo_ops and timer task, hnae3.ko includes some register function. When SRIOV is enable and hclge.ko is removed, HW device is unloaded but VF still exists, PF will not reply VF mbx messages, and cause errors. This patch fix it by disable SRIOV before remove hclge.ko. Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-27net: hns3: add limit ets dwrr bandwidth cannot be 0Guangbin Huang1-0/+9
[ Upstream commit 731797fdffa3d083db536e2fdd07ceb050bb40b1 ] If ets dwrr bandwidth of tc is set to 0, the hardware will switch to SP mode. In this case, this tc may occupy all the tx bandwidth if it has huge traffic, so it violates the purpose of the user setting. To fix this problem, limit the ets dwrr bandwidth must greater than 0. Fixes: cacde272dd00 ("net: hns3: Add hclge_dcb module for the support of DCB feature") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-27net: hns3: reset DWRR of unused tc to zeroGuangbin Huang1-0/+2
[ Upstream commit b63fcaab959807282e9822e659034edf95fc8bd1 ] Currently, DWRR of tc will be initialized to a fixed value when this tc is enabled, but it is not been reset to 0 when this tc is disabled. It cause a problem that the DWRR of unused tc is not 0 after using tc tool to add and delete multi-tc parameters. For examples, after enabling 4 TCs and restoring to 1 TC by follow tc commands: $ tc qdisc add dev eth0 root mqprio num_tc 4 map 0 1 2 3 0 1 2 3 queues \ 8@0 8@8 8@16 8@24 hw 1 mode channel $ tc qdisc del dev eth0 root Now there is just one TC is enabled for eth0, but the tc info querying by debugfs is shown as follow: $ cat /mnt/hns3/0000:7d:00.0/tm/tc_sch_info enabled tc number: 1 weight_offset: 14 TC MODE WEIGHT 0 dwrr 100 1 dwrr 100 2 dwrr 100 3 dwrr 100 4 dwrr 0 5 dwrr 0 6 dwrr 0 7 dwrr 0 This patch fixes it by resetting DWRR of tc to 0 when tc is disabled. Fixes: 848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-27net: dsa: lantiq_gswip: fix register definitionAleksander Jan Bajkowski1-1/+1
[ Upstream commit 66d262804a2276721eac86cf18fcd61046149193 ] I compared the register definitions with the D-Link DWR-966 GPL sources and found that the PUAFD field definition was incorrect. This definition is unused and causes no issues. Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-27lan78xx: select CRC32Vegard Nossum1-0/+1
[ Upstream commit 46393d61a328d7c4e3264252dae891921126c674 ] Fix the following build/link error by adding a dependency on the CRC32 routines: ld: drivers/net/usb/lan78xx.o: in function `lan78xx_set_multicast': lan78xx.c:(.text+0x48cf): undefined reference to `crc32_le' The actual use of crc32_le() comes indirectly through ether_crc(). Fixes: 55d7de9de6c30 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-20ionic: don't remove netdev->dev_addr when syncing uc listShannon Nelson1-0/+4
commit 5c976a56570f29aaf4a2f9a1bf99789c252183c9 upstream. Bridging, and possibly other upper stack gizmos, adds the lower device's netdev->dev_addr to its own uc list, and then requests it be deleted when the upper bridge device is removed. This delete request also happens with the bridging vlan_filtering is enabled and then disabled. Bonding has a similar behavior with the uc list, but since it also uses set_mac to manage netdev->dev_addr, it doesn't have the same the failure case. Because we store our netdev->dev_addr in our uc list, we need to ignore the delete request from dev_uc_sync so as to not lose the address and all hope of communicating. Note that ndo_set_mac_address is expressly changing netdev->dev_addr, so no limitation is set there. Fixes: 2a654540be10 ("ionic: Add Rx filter and rx_mode ndo support") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20r8152: select CRC32 and CRYPTO/CRYPTO_HASH/CRYPTO_SHA256Vegard Nossum1-0/+4
commit 9973a43012b6ad1720dbc4d5faf5302c28635b8c upstream. Fix the following build/link errors by adding a dependency on CRYPTO, CRYPTO_HASH, CRYPTO_SHA256 and CRC32: ld: drivers/net/usb/r8152.o: in function `rtl8152_fw_verify_checksum': r8152.c:(.text+0x2b2a): undefined reference to `crypto_alloc_shash' ld: r8152.c:(.text+0x2bed): undefined reference to `crypto_shash_digest' ld: r8152.c:(.text+0x2c50): undefined reference to `crypto_destroy_tfm' ld: drivers/net/usb/r8152.o: in function `_rtl8152_set_rx_mode': r8152.c:(.text+0xdcb0): undefined reference to `crc32_le' Fixes: 9370f2d05a2a1 ("r8152: support request_firmware for RTL8153") Fixes: ac718b69301c7 ("net/usb: new driver for RTL8152") Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20qed: Fix missing error code in qed_slowpath_start()chongjiapeng1-0/+1
commit a5a14ea7b4e55604acb0dc9d88fdb4cb6945bc77 upstream. The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'rc'. Eliminate the follow smatch warning: drivers/net/ethernet/qlogic/qed/qed_main.c:1298 qed_slowpath_start() warn: missing error code 'rc'. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: d51e4af5c209 ("qed: aRFS infrastructure support") Signed-off-by: chongjiapeng <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 03:52:41 +0300