summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2014-06-25brcmfmac: clear ht info during attach phaseArend van Spriel1-0/+3
After updating 2G bandwidth capability clear ht info. This will be properly set upon calling brcmf_update_wiphy_bands(). Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25brcmfmac: Add USB device 43566 to supported devices.Hante Meuleman1-0/+2
Add the USB 43566 device to the supported devices list. The 43566 is a WiFi-only variant of the 43569. It uses the same FW as 43569. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25brcmfmac: Add 43569 USB support.Hante Meuleman1-1/+9
Added usb device id for the new device 43569 to the list of supported devices. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25net/wireless/brcm80211/brcmfmac: Make return type and name reflect actual ↵Rasmus Villemoes3-6/+5
semantics Applying ++ to a bool is equivalent to setting it true, regardless of its initial value (bools are not uint1_t). Hence the function wl_get_vif_state_all can only ever return true/false. The only in-tree caller uses its return value as a boolean. So update its return type, and since the list traversal and bit testing have no side effects, just return true immediately. Its return value tells if any vif is in the specified state, so also rename it to brcmf_get_vif_state_any. Reviewed-by: Arend van Spriel<arend@broadcom.com> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25mwifiex: print sleep_confirm cmd/response and power save eventsBing Zhao1-5/+20
Sleep Confirm command is sent separately while other commands are handled through cmd_pending_q. Print sleep_confirm cmd and its response as well as power save events so that we have a clearer picture of power save handshake in driver log. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25mwifiex: update Copyright to 2014Xinming Hu46-46/+46
This patch updates mwifiex Copyright to 2014. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25mwifiex: add hscfg to debugfsXinming Hu4-2/+127
Some SDIO controllers do not support MMC_PM_KEEP_POWER properly. To test host sleep feature without putting the system into sleep we need to simulate host sleep configuration & handshake between driver and firmware using customized parameters. This patch adds hscfg debugfs item, with which user could change host sleep parameters for debugging. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25mwifiex: add firmware dump feature for SDIOAmitkumar Karwar2-0/+221
Firmware dump feature is added for SDIO based chipsets which can be used with the help of ethtool commands. 1) Trigger firmware dump operation: ethtool --set-dump mlan0 0xff When the operation is completed, udev event will be sent to trigger external application. 2) Following udev rule can be used to get the data from ethtool: DRIVER=="mwifiex_sdio", ACTION=="change", RUN+="/sbin/mwifiex_sdio_fw_dump.sh" mwifiex_sdio_fw_dump.sh: #!/bin/bash ethtool --set-dump mlan0 0 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/ITCM.log ethtool --set-dump mlan0 1 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/DTCM.log ethtool --set-dump mlan0 2 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/SQRAM.log ethtool --set-dump mlan0 3 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/APU.log ethtool --set-dump mlan0 4 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/CIU.log ethtool --set-dump mlan0 5 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/ICU.log ethtool --set-dump mlan0 6 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/MAC.log Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25mwifiex: get rid of global pointer reset_hostAmitkumar Karwar1-7/+4
As we can derive host pointer from adapter, maintaining a global variable doesn't make sense. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25mwifiex: use generic 'iface_work' workqueue for SDIO interfaceAmitkumar Karwar2-4/+21
Existing dedicated card_reset work queue is replaced with the interface specific workqueue pointer provided by mwifiex module. Also new work flag is added for card reset task. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25mwifiex: add firmware dump feature for PCIeAmitkumar Karwar7-1/+332
Firmware dump feature is added for PCIe based chipsets which can be used with the help of ethtool commands. 1) Trigger firmware dump operation: ethtool --set-dump mlan0 0xff When the operation is completed, udev event will be sent to trigger external application. 2) Following udev rule can be used to get the data from ethtool: DRIVER=="mwifiex_pcie", ACTION=="change", RUN+="/sbin/mwifiex_pcie_fw_dump.sh" mwifiex_pcie_fw_dump.sh: #!/bin/bash ethtool --set-dump mlan0 0 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/ITCM.log ethtool --set-dump mlan0 1 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/DTCM.log ethtool --set-dump mlan0 2 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/SQRAM.log ethtool --set-dump mlan0 3 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/IRAM.log Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25Merge branch 'master' of ↵John W. Linville31-177/+609
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2014-06-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-nextJohn W. Linville23-80/+114
2014-06-25mac80211: split sched scan IEsDavid Spinadel12-32/+59
Split sched scan IEs to band specific and not band specific blocks. Common IEs blocks may be sent to the FW once per command, instead of per band. This allows optimization of size of the command, which may be required by some drivers (eg. iwlmvm with newer firmware version). As this changes the mac80211 API, update all drivers to use the new version correctly, even if they don't (yet) make use of the split data. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-25mac80211: support more than one band in scan requestDavid Spinadel11-11/+20
Some drivers (such as iwlmvm) can handle multiple bands in a single HW scan request. Add a HW flag to indicate that the driver support this. To hold the required data, create a separate structure for HW scan request that holds cfg scan request and data about different parts of the scan IEs. As this changes the mac80211 API, update all drivers using it to use the correct new function type/argument. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-24iwlwifi: mvm: handle device start failures during restartJohannes Berg1-0/+10
If the device fails during a restart, mac80211 now handles the situation better but we still have a little bit of cleanup to do in the driver - add the required code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: ArikX Nemtsov <arik@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwivi: mvm: BT Coex - properly set the priority of beaconsEmmanuel Grumbach1-6/+7
Since the new API allows multiple priorities, we need to properly set the beacon's prorities in the TX cmd associated to it. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: support extended beacon notificationDavid Spinadel5-10/+42
Use extended beacon notification when supported by FW. Set last beacon system time to AP or GO interface. System time of last beacon can be used to avoid TBTT overlapping between two interfaces, CSA and other uses. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: Introduce an API to set STA_FLG_DISABLE_TX flagAndrei Otcheretianski4-5/+26
Introduce new station flag STA_FLG_DISABLE_TX, which is modified with ADD_STA command. This flag, when set, disables tx to the STA. Provide an API (iwl_mvm_sta_modify_disable_tx) to modify this flag, which should be used in channel switch and immediate quiet flows. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: disable beacon filtering escape timer in d0i3Eliad Peller1-1/+1
The beacon filtering configuration in d0i3 currently uses the max value defined as 1024. However, with beacon interval of 100ms we end up with too-frequent wakeups. Instead, configure the escape timer to 0, asking the fw to disable it altogether. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: BT Coex - avoid the shared antenna for management framesEmmanuel Grumbach3-1/+13
If BT is active, we need to refrain from using the shared antenna. This logic is done in the firmware when we use the link quality tables. But for management frames, the rate is written in the Tx command by the driver. Hence the driver needs to make sure not use the shared antenna when BT is active for any frames that don't use the rate scale table such as management frames or multicast. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: BT Coex - add reduced Tx power thresholds to constantsEmmanuel Grumbach2-6/+6
This really belongs to the constants file. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: BT Coex - don't limit rate control if TTC is onEmmanuel Grumbach2-1/+9
When the firmware enables TxTxCorunning, we can lift the constaints on the rate control. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: BT Coex - allow MIMO in more casesEmmanuel Grumbach1-7/+10
We can Tx in MIMO rates when we are in TxTx Disallow mode just like we can when we are in Tight mode. Same if we are in 5Ghz regardless of the mode we are. Change the code to allow MIMO in these cases. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: BT Coex - allow to force the antenna allocationEmmanuel Grumbach4-0/+94
This can be used for testing. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: assure no overflows occur while reading otpLiad Kaufman1-2/+12
Just in case sizes change in the OTP without proper SW updating, an additional check is inserted when reading OTP sections to assure no overflows occur. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: nvm: update maximal parsed values in external nvmLiad Kaufman1-2/+13
Some of the maximum values of the parsed external NVM file in the B-step of the 8000 HW family were updated, so this updates these values. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: update trans->hw_rev 8000 hw family formatLiad Kaufman1-0/+10
The format of the CSR_HW_REV register has changed in 8000 HW family. To keep backwards compatibility, we store the value of this register as usual in trans->hw_rev, only we store it in the old format in this variable. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: fix bug in set_hw_address functionEran Harary1-12/+22
Don't use nvm_hw pointer if it is NULL. Print an error message if the MAC address isn't valid. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: dvm: add a force_cam module parameter to fully disable power savingAndy Lutomirski1-0/+9
iwldvm stalls are often blamed on power management. Add an option to force it all the way off. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: pcie: improve debugfs queue infoAndy Lutomirski1-2/+8
This adds need_update and write_actual to rx_queue and need_update and an HCMD indicator to tx_queue. On my card, rx_queue now looks like: read: 181 write: 180 write_actual: 176 need_update: 0 free_count: 40 closed_rb_num: 181 tx_queue now looks like: hwq 00: read=29 write=30 use=1 stop=0 need_update=0 hwq 01: read=0 write=0 use=1 stop=0 need_update=0 hwq 02: read=128 write=128 use=1 stop=0 need_update=0 hwq 03: read=0 write=0 use=1 stop=0 need_update=0 hwq 04: read=94 write=94 use=1 stop=0 need_update=0 HCMD hwq 05: read=0 write=0 use=0 stop=0 need_update=0 hwq 06: read=0 write=0 use=0 stop=0 need_update=0 hwq 07: read=0 write=0 use=0 stop=0 need_update=0 hwq 08: read=0 write=0 use=0 stop=0 need_update=0 hwq 09: read=0 write=0 use=0 stop=0 need_update=0 hwq 10: read=0 write=0 use=0 stop=0 need_update=0 hwq 11: read=0 write=0 use=0 stop=0 need_update=0 hwq 12: read=0 write=0 use=0 stop=0 need_update=0 hwq 13: read=0 write=0 use=0 stop=0 need_update=0 hwq 14: read=0 write=0 use=0 stop=0 need_update=0 hwq 15: read=0 write=0 use=0 stop=0 need_update=0 hwq 16: read=0 write=0 use=0 stop=0 need_update=0 hwq 17: read=0 write=0 use=0 stop=0 need_update=0 hwq 18: read=0 write=0 use=0 stop=0 need_update=0 hwq 19: read=0 write=0 use=0 stop=0 need_update=0 This may help with debugging queue stalls. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: pcie: log when waking the NIC for hcmd submission failsAndy Lutomirski1-0/+1
I've never seen this happen, but it's useful to rule it out. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: fix NVM channel attribute map.David Spinadel1-4/+18
Fix NVM channel attributes. Add indoor-only and GO Concurrent bits. Remove DFS channel bit which is overlapped with radar. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: fixes for 8000 NVM flowEran Harary2-3/+2
The nvm_file should be loaded by default for SDIO procucts only. Change the configuration accordingly. While at it, fix a typo in the device name. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: pcie: add firmware monitor capabilitiesEmmanuel Grumbach6-4/+158
This allows to use the firmware monitor. This capability uses a lot of contiguous memory (up to 64MB), so make its usage module parameter dependent. The driver will try to allocate as much contiguous memory as possible downgrading its requirements until the allocation succeeds. Dump this data into the fw-error dump file when an error happens. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: rename iwl_mvm_fw_error_next_dataEmmanuel Grumbach2-5/+5
This is not related to mvm. Rename to iwl_fw_error_next_data. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: add device / firmware to fw-error-dump fileEmmanuel Grumbach5-5/+53
This can be useful later for parsing since the parsing may differ based on the device's family / bus. Also add the human readable version of the firmware. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: remove MCS32 support declarationEliad Peller1-1/+0
MCS32 is currently not supported, so don't declare support for it. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: don't use hardcoded num of scan channelsDavid Spinadel7-51/+56
Use num of scan channels as advertised by fw TLV. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24Merge remote-tracking branch 'iwlwifi-fixes/master' into iwlwifi-nextEmmanuel Grumbach1-46/+19
2014-06-24iwlwifi: mvm: add back support for low-priority scanJohannes Berg2-3/+7
The low-priority scan feature can be useful, e.g. for OBSS scans (if those are required by the AP); add back support for it, restoring the maximum out time to the value it was for low-priority scan before that was removed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: use ksize to memset scan_commandDavid Spinadel1-3/+1
Use ksize to get scan command size instead of calculating it, to avoid nasty bugs. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: bump API version for 8000 devicesEmmanuel Grumbach1-1/+1
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: rework sched scan channel configurationEliad Peller1-46/+19
The current sched scan channel configuration code configures all the supported channels for scanning. However, this can result in SYSASSERT in some cases, when the configured channel is disabled. Instead, configure only the channels given in the req struct, and set the channel_count field appropriately. While on it, change the code to use channel->hw_value instead of recalculating the channel number. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-23cfg80211: pass TDLS initiator in tdls_mgmt operationsArik Nemtsov1-1/+2
The TDLS initiator is set once during link setup. If determines the address ordering in the link identifier IE. Fix dependent drivers - mwifiex and mac80211. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211_hwsim: clean up own address matchingJohannes Berg1-35/+31
Using perm_addr is always wrong, it may be reassigned by anyone using standard netdev APIs. Remove that from the match function and also use the match function where only the perm_addr was used now. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-20ath9k: Fix build error in ath_reset_internalRajkumar Manoharan1-5/+3
drivers/net/wireless/ath/ath9k/main.c:299 ath_reset_internal() error: we previously assumed 'hchan' could be null (see line 293) Cc: Felix Fietkau <nbd@openwrt.org> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-20b43: add config for (en|dis)abling G-PHY supportRafał Miłecki4-5/+14
This allows new devices users to save some space. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-20b43: remove leftover code from old devices supportRafał Miłecki3-16/+0
Old devices (A-PHY or B-PHY) are supposed to be supported by b43legacy. We keep phy_a.c as it's needed for G-PHY which shares some design. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-20wil6210: fix for 64-bit integer divisionVladimir Kondratiev1-2/+3
On some platforms, cycles_t is 64-bit, and gcc generates call to __udivdi3 for straight division of cycles_t/cycles_t. This leads to compilation failure, as this function is not exist in the kernel runtime. do_div() to rescue Original report: tree: git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next.git master head: 2e91606f5e1ec7329557dfc0e298c4c021acbb80 commit: 7c0acf868d2e470c9d6a40091acf8d6444c01b57 [81/103] wil6210: Tx performance monitoring config: i386-randconfig-ha3-0620 (attached as .config) All error/warnings: drivers/built-in.o: In function `wil_vring_debugfs_show': >> debugfs.c:(.text+0x39b9be): undefined reference to `__udivdi3' Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-23 11:04:02 +0300