summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2011-05-05Merge branch 'master' of ↵David S. Miller14-201/+559
master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-next-2.6
2011-05-04ixgbe: Cleanup PCIe bus speed infoDon Skidmore1-2/+2
PCIe connections should be expressed as GT/s (GigaTransfers per second) instead of the current Gb/s (Gigabits per second). In addition, it is incorrect because (due to PCIe gen 1 & 2 having a 20% overhead) the actually data rate, when expressed in Gb/s, is only 80% of the rate of GT/s. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-04ixgbe: improve EEPROM read/write operationsEmil Tantilov7-100/+465
Introduce buffered read/writes which greatly improves performance on parts with large EEPROMs. Previously reading/writing a word requires taking/releasing of synchronization semaphores which adds 10ms to each operation. The optimization is to read/write in buffers, but make sure the semaphore is not held for >500ms according to the datasheet. Since we can't read the EEPROM page size ixgbe_detect_eeprom_page_size() is used to discover the EEPROM size when needed and keeps the result in word_page_size for the rest of the run time. Use buffered reads for ethtool -e. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-04ixgbe: fix sparse warningEmil Tantilov1-46/+62
warning: symbol 'before' shadows an earlier one Convert large macros to functions similar to e1000e. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Acked-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-04ixgbe: fix typo error with software defined pins on 82599Don Skidmore1-1/+2
Correcting a simple typo with enabling software defined pins. I don't believe this was causing any issues but this is how it was meant to be implemented. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-04ixgbe: Use function pointer for ixgbe_acquire/release_swfw_sync()Emil Tantilov3-8/+7
Change remaining direct calls to function pointers. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-04igbvf: remove bogus phys_idstephen hemminger1-6/+0
This device lies about supporting phys_id. Remove it and just let the upper layer report not supported. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Tested-by: <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-04igb: Add check for invalid size to igb_get_invariants_82575()Carolyn Wyborny1-0/+8
Recent commits have changed how EEPROM size is checked and if the size word is misconfigured, the driver will fail to load. This patch adds a check for invalid size word in the EEPROM and uses default size instead for 82576 parts. Reported-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-04ixgb: convert to set_phys_idJeff Kirsher2-37/+12
Based on the original patch sent by Stephen Hemminger. This version incorporates the ethtool changes that Bruce Allan submitted. CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com>
2011-05-04e100: fix build warningEmil Tantilov1-1/+1
In function 'e100_hw_init': warning: 'err' may be used uninitialized in this function Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-04pptp: Use flowi4's daddr/saddr in pptp_xmit().David S. Miller1-2/+2
Instead of rt->rt_{src,dst} Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-04ipv4: Make caller provide on-stack flow key to ip_route_output_ports().David S. Miller1-2/+4
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-04net/stmmac: Move "#include <linux/platform_device.h>" to linux/stmmac.hViresh KUMAR1-1/+0
stmmac.h uses struct platform_device and doesn't include <linux/platform_device.h>. Whereas drivers/net/stmmac/stmmac.h includes it, but doesn't directly use it. And so we get following compilation warning while using this file: warning: ‘struct platform_device’ declared inside parameter list This patch includes <linux/platform_device.h> in linux/stmmac.h and removes it from drivers/net/stmmac/stmmac.h Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-30net/igb/e1000/e1000e: more robust ethtool duplex/speed configurationDavid Decotigny7-38/+59
This makes sure that one cannot request a 99Mbps full-duplex and get a 100Mbps half-duplex configuration in return due to the way the speed/duplex parameters are handled internally. Tested: e1000 works Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-30tulip/de2104x: don't report different speeds depending on port typeDavid Decotigny1-7/+3
Initial driver reported different speeds depending on the port being used. This advertises the speed to be 10Mbps in any case, which is what it actually is on the wire. Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-30acenic: Fix using the specified speed when configuring NICDavid Decotigny1-1/+1
This tells the NIC to take the speed specified by ethtool into account when configuring the NIC, instead of keeping the previous speed. Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-30ethtool: cosmetic: Use ethtool ethtool_cmd_speed APIDavid Decotigny74-194/+229
This updates the network drivers so that they don't access the ethtool_cmd::speed field directly, but use ethtool_cmd_speed() instead. For most of the drivers, these changes are purely cosmetic and don't fix any problem, such as for those 1GbE/10GbE drivers that indirectly call their own ethtool get_settings()/mii_ethtool_gset(). The changes are meant to enforce code consistency and provide robustness with future larger throughputs, at the expense of a few CPU cycles for each ethtool operation. All drivers compiled with make allyesconfig ion x86_64 have been updated. Tested: make allyesconfig on x86_64 + e1000e/bnx2x work Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-30ethtool: Use full 32 bit speed range in ethtool's set_settingsDavid Decotigny43-129/+161
This makes sure the ethtool's set_settings() callback of network drivers don't ignore the 16 most significant bits when ethtool calls their set_settings(). All drivers compiled with make allyesconfig on x86_64 have been updated. Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-30ethtool: Call ethtool's get/set_settings callbacks with cleaned dataDavid Decotigny12-40/+49
This makes sure that when a driver calls the ethtool's get/set_settings() callback of another driver, the data passed to it is clean. This guarantees that speed_hi will be zeroed correctly if the called callback doesn't explicitely set it: we are sure we don't get a corrupted speed from the underlying driver. We also take care of setting the cmd field appropriately (ETHTOOL_GSET/SSET). This applies to dev_ethtool_get_settings(), which now makes sure it sets up that ethtool command parameter correctly before passing it to drivers. This also means that whoever calls dev_ethtool_get_settings() does not have to clean the ethtool command parameter. This function also becomes an exported symbol instead of an inline. All drivers visible to make allyesconfig under x86_64 have been updated. Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-30qlcnic: Support for GBE port settingsSony Chacko3-63/+40
Enable setting speed and auto negotiation parameters for GbE ports. Hardware do not support half duplex setting currently. o Update driver version to 5.0.17. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29qlcnic: support rcv ring configuration through ethtoolSucheta Chakraborty3-33/+156
o Support ethtool command ETHTOOL_GCHANNELS and ETHTOOL_SCHANNELS. o Number of rcv rings configuration depend upon number of msix vector. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29ipv4, ipv6, bonding: Restore control over number of peer notificationsBen Hutchings3-2/+89
For backward compatibility, we should retain the module parameters and sysfs attributes to control the number of peer notifications (gratuitous ARPs and unsolicited NAs) sent after bonding failover. Also, it is possible for failover to take place even though the new active slave does not have link up, and in that case the peer notification should be deferred until it does. Change ipv4 and ipv6 so they do not automatically send peer notifications on bonding failover. Change the bonding driver to send separate NETDEV_NOTIFY_PEERS notifications when the link is up, as many times as requested. Since it does not directly control which protocols send notifications, make num_grat_arp and num_unsol_na aliases for a single parameter. Bump the bonding version number and update its documentation. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Acked-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29net: ibmveth: force reconfiguring checksum settings on startupMichał Mirosław1-0/+2
Commit b9367bf3ee6d ("net: ibmveth: convert to hw_features") accidentally removed call to ibmveth_set_csum_offload() in ibmveth_probe(). Put the call back where it was, but with additional error checking provided by ibmveth_set_features(). Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> [sfr: dev -> netdev] Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29qlcnic: fix memory leak in qlcnic_blink_led.Sucheta Chakraborty2-8/+6
o Memory allocated in ETHTOOL_ACTIVE mode, is not getting freed. So, in ETHTOOL_ID_INACTIVE mode, return after freeing allocated memory. o Using set bit instead of blink_down field, as it is also required in internal Loopback test and etc. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29tg3: Convert u32 flag,flg2,flg3 uses to bitmapJoe Perches2-739/+728
Using a bitmap instead of separate u32 flags allows a consistent, simpler and more extensible mechanism to determine capabilities. Convert bitmasks to enum. Add tg3_flag, tg3_flag_clear and tg3_flag_set. Convert the flag & bitmask tests. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29net:use help function of skb_checksum_start_offset to calculate offsetShan Wei1-1/+1
Although these are equivalent, but the skb_checksum_start_offset() is more readable. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28r8169: fix merge conflict fix.Francois Romieu1-20/+5
- use adequate MAC_VER id (see 01dc7fec4025f6bb72b6b98ec88b375346b6dbbb) - remove duplicate rtl_firmware_info record - remove duplicate functions Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Realtek linux nic maintainers <nic_swsd@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-27ixgbe: convert to ethtool set_phys_idEmil Tantilov2-12/+18
Based on the original patch submitted by Stephen Hemminger. This patch makes the following changes: - Change ETHTOOL_ID_INACTIVE return value to 2 (blinks/sec) - Fix restoring of IXGBE_LEDCTL CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-27ixgbe: fix X540 ethtool loopback test.Don Skidmore1-0/+7
On X540 we need to set the MACC.FLU bit to 1 in order to force the link up before entering MAC loopback. This is only used in the ethtool loopback test, which was failing. This patch corrects it. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-27ixgbe: Bump versionDon Skidmore1-2/+2
Bump the driver version number to better match up with the out of tree driver that has similar functionality. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-27ixgbe: enable SCTP checksum offload for X540Don Skidmore1-1/+7
X540 supports SCTP checksum offload so enable it. It was overlooked when X540 support was initially added to the driver. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-27ixgbe: do not clear FCoE DDP error status for received ABTSYi Zou1-2/+2
The ddp->err is initialized to be 1 to make sure outstanding DDP context is guaranteed to be invalidated when HW is not auto-invalidating it. However, in case of receiving ABTS response for a DDPed I/O, the ddp->err was cleared, bypassing the invalidating of the DDP context from upper protocol stack when ixgbe_fcoe_ddp_put() is called. This bug is fixed here by updating the error only when FCP_RSP is received. Signed-off-by: Yi Zou <yi.zou@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-27ixgbe: fix static functionsJohn Fastabend4-5/+5
Define functions as static added C=1 (sparse) to my make line brought these to my attention. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-27ixgbe: remove ntuple display supportAlexander Duyck2-6/+0
This change removes the ntuple display support from ixgbe. The reason for this change is to resolve a number of issues in the way display filtering is handled. I plan to add support for displaying these filters via the network flow classifier interface. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-27ixgbe: add LED blink code for x540Emil Tantilov1-2/+62
Implement blink_led_start and blink_led_stop functions for x540 using the MACC register. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-27ixgbe: add support for 64k EEPROM for 82599Emil Tantilov1-1/+30
82599 supports up to 32k EEPROM addressing via EERD register. If we wish to address larger EEPROM this have to be done via serial interface. This patch adds function ixgbe_read_eeprom_82599 which selects the best method to read the EEPROM. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-27ixgbe: register defines cleanupEmil Tantilov2-67/+125
Remove duplicates. Fix incorrect defines. Fix/Update comments. Fix whitespace. Add new register defines. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-27ixgbe: explicitly disable 100H for x540Emil Tantilov1-1/+2
100H is not supported on this HW, but the bit is set on the PHY. This can result in link at 100F when advertising only 1000F. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-27e1000e: implement ethtool set_phys_idBruce Allan8-59/+32
Based on a patch from Stephen Hemminger <shemminger@vyatta.com>. The new ethtool set_phys_id takes over controlling the LED for identifying boards. This fixes the lockout during that period. For this device lots of extra infrastructure can also be removed by using set_phys_id. v2: - return blink frequency for parts that do not support blink in h/w - add blink_led function pointers for devices that do support blink in h/w to cleanup the test for this functionality Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-26Merge branch 'master' of ↵David S. Miller14-78/+150
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Resolved logic conflicts causing a build failure due to drivers/net/r8169.c changes using a patch from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26tg3: Update version to 3.118Matt Carlson1-2/+2
This patch updates the tg3 version to 3.118. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26tg3: Whitespace cleanupsMatt Carlson1-7/+2
This patch gets rid of some harmless whitespace errors. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26tg3: Add EEH supportMatt Carlson1-0/+147
This patch adds EEH support to the tg3 driver. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26tg3: Add TSO loopback testMatt Carlson1-35/+123
This patch adds code to exercise the TSO portion of the device through a phy loopback test. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26tg3: Organize loopback test failure flagsMatt Carlson1-8/+12
As more test modes are added to each loopback mode, the need to organise the results increases. This patch groups the results by loopback mode, and then by test mode. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26tg3: Fix int generation hw bug for 5719 / 5720Matt Carlson2-0/+4
On the 5719 and 5720, there is a bug where the hardware will misinterpret a status tag update and leave interrupts permanently disabled. This patch enables a hardware fix that works around the issue. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-25Merge branch 'for-davem' of ↵David S. Miller156-5046/+5647
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2011-04-25be2net: Fixed a bug in be_cmd_get_regs().Somnath Kotur1-25/+28
Same WRB entry was being reused over different iterations of a loop while issuing non-embedded IOCTL requests.Fixed couple of minor bugs in this path as well. Re-factored code to alloc/free memory for DMA outside of loop Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-25bonding: move processing of recv handlers into handle_frame()Jiri Pirko7-168/+43
Since now when bonding uses rx_handler, all traffic going into bond device goes thru bond_handle_frame. So there's no need to go back into bonding code later via ptype handlers. This patch converts original ptype handlers into "bonding receive probes". These functions are called from bond_handle_frame and they are registered per-mode. Note that vlan packets are also handled because they are always untagged thanks to vlan_untag() Note that this also allows arpmon for eth-bond-bridge-vlan topology. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-25Merge branch 'master' of ↵John W. Linville156-5046/+5647
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-core.c drivers/net/wireless/rt2x00/rt2x00queue.c drivers/net/wireless/rt2x00/rt2x00queue.h
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-29 05:04:04 +0300