| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
ocelot->stats
[ Upstream commit e780e3193e889fd8358b862f7cd18ec5a4901caf ]
Rather than reading the stats64 counters directly from the 32-bit
hardware, it's better to rely on the output produced by the periodic
ocelot_port_update_stats().
It would be even better to call ocelot_port_update_stats() right from
ocelot_get_stats64() to make sure we report the current values rather
than the ones from 2 seconds ago. But we need to export
ocelot_port_update_stats() from the switch lib towards the switchdev
driver for that, and future work will largely undo that.
There are more ocelot-based drivers waiting to be introduced, an example
of which is the SPI-controlled VSC7512. In that driver's case, it will
be impossible to call ocelot_port_update_stats() from ndo_get_stats64
context, since the latter is atomic, and reading the stats over SPI is
sleepable. So the compromise taken here, which will also hold going
forward, is to report 64-bit counters to stats64, which are not 100% up
to date.
Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9190460084ddd0e9235f55eab0fdd5456b5f2fd5 ]
The ocelot counters are 32-bit and require periodic reading, every 2
seconds, by ocelot_port_update_stats(), so that wraparounds are
detected.
Currently, the counters reported by ocelot_get_stats64() come from the
32-bit hardware counters directly, rather than from the 64-bit
accumulated ocelot->stats, and this is a problem for their integrity.
The strategy is to make ocelot_get_stats64() able to cherry-pick
individual stats from ocelot->stats the way in which it currently reads
them out from SYS_COUNT_* registers. But currently it can't, because
ocelot->stats is an opaque u64 array that's used only to feed data into
ethtool -S.
To solve that problem, we need to make ocelot->stats indexable, and
associate each element with an element of struct ocelot_stat_layout used
by ethtool -S.
This makes ocelot_stat_layout a fat (and possibly sparse) array, so we
need to change the way in which we access it. We no longer need
OCELOT_STAT_END as a sentinel, because we know the array's size
(OCELOT_NUM_STATS). We just need to skip the array elements that were
left unpopulated for the switch revision (ocelot, felix, seville).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 18d8e67df184081bc6ce6220a2dd965cfd3d7e6b ]
The 2 methods can run concurrently, and one will change the window of
counters (SYS_STAT_CFG_STAT_VIEW) that the other sees. The fix is
similar to what commit 7fbf6795d127 ("net: mscc: ocelot: fix mutex lock
error during ethtool stats read") has done for ethtool -S.
Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 22d842e3efe56402c33b5e6e303bb71ce9bf9334 ]
ocelot_get_stats64() currently runs unlocked and therefore may collide
with ocelot_port_update_stats() which indirectly accesses the same
counters. However, ocelot_get_stats64() runs in atomic context, and we
cannot simply take the sleepable ocelot->stats_lock mutex. We need to
convert it to an atomic spinlock first. Do that as a preparatory change.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 6faee3d4ee8be0f0367d0c3d826afb3571b7a5e0 upstream.
The commit c23d92b80e0b ("igb: Teardown SR-IOV before
unregister_netdev()") places the unregister_netdev() call after the
igb_disable_sriov() call to avoid functionality issue.
However, it introduces several race conditions when detaching a device.
For example, when .remove() is called, the below interleaving leads to
use-after-free.
(FREE from device detaching) | (USE from netdev core)
igb_remove | igb_ndo_get_vf_config
igb_disable_sriov | vf >= adapter->vfs_allocated_count?
kfree(adapter->vf_data) |
adapter->vfs_allocated_count = 0 |
| memcpy(... adapter->vf_data[vf]
Moreover, the igb_disable_sriov() also suffers from data race with the
requests from VF driver.
(FREE from device detaching) | (USE from requests)
igb_remove | igb_msix_other
igb_disable_sriov | igb_msg_task
kfree(adapter->vf_data) | vf < adapter->vfs_allocated_count
adapter->vfs_allocated_count = 0 |
To this end, this commit first eliminates the data races from netdev
core by using rtnl_lock (similar to commit 719479230893 ("dpaa2-eth: add
MAC/PHY support through phylink")). And then adds a spinlock to
eliminate races from driver requests. (similar to commit 1e53834ce541
("ixgbe: Add locking to prevent panic when setting sriov_numvfs to zero")
Fixes: c23d92b80e0b ("igb: Teardown SR-IOV before unregister_netdev()")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220817184921.735244-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
intel_eth_pci_remove()
commit 5c23d6b717e4e956376f3852b90f58e262946b50 upstream.
Commit 09f012e64e4b ("stmmac: intel: Fix clock handling on error and remove
paths") removed this clk_disable_unprepare()
This was partly revert by commit ac322f86b56c ("net: stmmac: Fix clock
handling on remove path") which removed this clk_disable_unprepare()
because:
"
While unloading the dwmac-intel driver, clk_disable_unprepare() is
being called twice in stmmac_dvr_remove() and
intel_eth_pci_remove(). This causes kernel panic on the second call.
"
However later on, commit 5ec55823438e8 ("net: stmmac: add clocks management
for gmac driver") has updated stmmac_dvr_remove() which do not call
clk_disable_unprepare() anymore.
So this call should now be called from intel_eth_pci_remove().
Fixes: 5ec55823438e8 ("net: stmmac: add clocks management for gmac driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/d7c8c1dadf40df3a7c9e643f76ffadd0ccc1ad1b.1660659689.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 61d5e2a251fb20c2c5e998c3f1d52ed6d5360319 upstream.
Code reimplements functionality already in `fec_ptp_read()`,
but misses check for FEC_QUIRK_BUG_CAPTURE. Replace with function call.
Fixes: 28b5f058cf1d ("net: fec: ptp: fix convergence issue to support LinuxPTP stack")
Signed-off-by: Csókás Bence <csokas.bence@prolan.hu>
Link: https://lore.kernel.org/r/20220811101348.13755-1-csokas.bence@prolan.hu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 57c942bc3bef0970f0b21f8e0998e76a900ea80d upstream.
When a tx_timeout fires, the PF attempts to recover by incrementally
resetting. First we try a PFR, then CORER and finally a GLOBR. If the
GLOBR fails, then we keep hitting the tx_timeout and incrementing the
recovery level and issuing dmesgs, which is both annoying to the user
and accomplishes nothing.
If the GLOBR fails, then we're pretty much totally hosed, and there's
not much else we can do to recover, so this makes it such that we just
kill the VSI and stop hitting the tx_timeout in such a case.
Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Alan Brady <alan.brady@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2c6482091f01ba104cf8ee549aa5c717e80d43ea upstream.
Fix checksum offload on VXLAN tunnels.
In case, when mpls protocol is not used, set l4 header to transport
header of skb. This fixes case, when user tries to offload checksums
of VXLAN tunneled traffic.
Steps for reproduction (requires link partner with tunnels):
ip l s enp130s0f0 up
ip a f enp130s0f0
ip a a 10.10.110.2/24 dev enp130s0f0
ip l s enp130s0f0 mtu 1600
ip link add vxlan12_sut type vxlan id 12 group 238.168.100.100 dev \
enp130s0f0 dstport 4789
ip l s vxlan12_sut up
ip a a 20.10.110.2/24 dev vxlan12_sut
iperf3 -c 20.10.110.1 #should connect
Without this patch, TX descriptor was using wrong data, due to
l4 header pointing wrong address. NIC would then drop those packets
internally, due to incorrect TX descriptor data, which increased
GLV_TEPC register.
Fixes: b4fb2d33514a ("i40e: Add support for MPLS + TSO")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 79956b83ed4281c35561c39254558092d96a9ed1 upstream.
Commit 1273f89578f2 ("ice: Fix broken IFF_ALLMULTI handling")
introduced new checks when setting/clearing promiscuous mode. But if the
requested promiscuous mode setting already exists, an -EEXIST error
message would be printed. This is incorrect because promiscuous mode is
either on/off and shouldn't print an error when the requested
configuration is already set.
This can happen when removing a bridge with two bonded interfaces and
promiscuous most isn't fully cleared from VLAN VSI in hardware.
Fix this by ignoring cases where requested promiscuous mode exists.
Fixes: 1273f89578f2 ("ice: Fix broken IFF_ALLMULTI handling")
Signed-off-by: Benjamin Mikailenko <benjamin.mikailenko@intel.com>
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit abddafd4585cc825d454da3cf308ad1226f6c554 upstream.
When at least two interfaces are bonded and a bridge is enabled on the
bond, an error can occur when the bridge is removed and re-added. The
reason for the error is because promiscuous mode was not fully cleared from
the VLAN VSI in the hardware. With this change, promiscuous mode is
properly removed when the bridge disconnects from bonding.
[ 1033.676359] bond1: link status definitely down for interface enp95s0f0, disabling it
[ 1033.676366] bond1: making interface enp175s0f0 the new active one
[ 1033.676369] device enp95s0f0 left promiscuous mode
[ 1033.676522] device enp175s0f0 entered promiscuous mode
[ 1033.676901] ice 0000:af:00.0 enp175s0f0: Error setting Multicast promiscuous mode on VSI 6
[ 1041.795662] ice 0000:af:00.0 enp175s0f0: Error setting Multicast promiscuous mode on VSI 6
[ 1041.944826] bond1: link status definitely down for interface enp175s0f0, disabling it
[ 1041.944874] device enp175s0f0 left promiscuous mode
[ 1041.944918] bond1: now running without any active interface!
Fixes: c31af68a1b94 ("ice: Add outer_vlan_ops and VSI specific VLAN ops implementations")
Co-developed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/
Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Tested-by: Igor Raits <igor@gooddata.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 11e551a2efa4481bd4f616ab75374a2710b480e9 upstream.
Ignore EEXIST error when setting promiscuous mode.
This fix is needed because the driver could set promiscuous mode
when it still has not cleared properly.
Promiscuous mode could be set only once, so setting it second
time will be rejected.
Fixes: 5eda8afd6bcc ("ice: Add support for PF/VF promiscuous mode")
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/
Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Tested-by: Igor Raits <igor@gooddata.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ffa9ed86522f1c08d4face4e0a4ebf366037bf19 upstream.
Avoid enabling or disabling VLAN 0 when trying to set promiscuous
VLAN mode if double VLAN mode is enabled. This fix is needed
because the driver tries to add the VLAN 0 filter twice (once for
inner and once for outer) when double VLAN mode is enabled. The
filter program is rejected by the firmware when double VLAN is
enabled, because the promiscuous filter only needs to be set once.
This issue was missed in the initial implementation of double VLAN
mode.
Fixes: 5eda8afd6bcc ("ice: Add support for PF/VF promiscuous mode")
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/
Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Tested-by: Igor Raits <igor@gooddata.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 664d4646184ed986f8195df684cc4660563fb02a upstream.
VF was not able to send tagged traffic when it didn't
have any VLAN interfaces and VLAN anti-spoofing was enabled.
Fix this by allowing VFs with no VLAN filters to send tagged
traffic. After VF adds a VLAN interface it will be able to
send tagged traffic matching VLAN filters only.
Testing hints:
1. Spawn VF
2. Send tagged packet from a VF
3. The packet should be sent out and not dropped
4. Add a VLAN interface on VF
5. Send tagged packet on that VLAN interface
6. Packet should be sent out and not dropped
7. Send tagged packet with id different than VLAN interface
8. Packet should be dropped
Fixes: daf4dd16438b ("ice: Refactor spoofcheck configuration functions")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cf90b74341eecc32ceef0c136954a1668e43b1e7 upstream.
During stress test with attaching and detaching VF from KVM and
simultaneously changing VFs spoofcheck and trust there was a
call trace in ice_reset_vf that VF's VSI is null.
[145237.352797] WARNING: CPU: 46 PID: 840629 at drivers/net/ethernet/intel/ice/ice_vf_lib.c:508 ice_reset_vf+0x3d6/0x410 [ice]
[145237.352851] Modules linked in: ice(E) vfio_pci vfio_pci_core vfio_virqfd vfio_iommu_type1 vfio iavf dm_mod xt_CHECKSUM xt_MASQUERADE
xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink tun
bridge stp llc sunrpc intel_rapl_msr intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm iTCO_wdt iTC
O_vendor_support irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel rapl ipmi_si intel_cstate ipmi_devintf joydev intel_uncore m
ei_me ipmi_msghandler i2c_i801 pcspkr mei lpc_ich ioatdma i2c_smbus acpi_pad acpi_power_meter ip_tables xfs libcrc32c i2c_algo_bit drm_sh
mem_helper drm_kms_helper sd_mod t10_pi crc64_rocksoft syscopyarea crc64 sysfillrect sg sysimgblt fb_sys_fops drm i40e ixgbe ahci libahci
libata crc32c_intel mdio dca wmi fuse [last unloaded: ice]
[145237.352917] CPU: 46 PID: 840629 Comm: kworker/46:2 Tainted: G S W I E 5.19.0-rc6+ #24
[145237.352921] Hardware name: Intel Corporation S2600WTT/S2600WTT, BIOS SE5C610.86B.01.01.0008.021120151325 02/11/2015
[145237.352923] Workqueue: ice ice_service_task [ice]
[145237.352948] RIP: 0010:ice_reset_vf+0x3d6/0x410 [ice]
[145237.352984] Code: 30 ec f3 cc e9 28 fd ff ff 0f b7 4b 50 48 c7 c2 48 19 9c c0 4c 89 ee 48 c7 c7 30 fe 9e c0 e8 d1 21 9d cc 31 c0 e9 a
9 fe ff ff <0f> 0b b8 ea ff ff ff e9 c1 fc ff ff 0f 0b b8 fb ff ff ff e9 91 fe
[145237.352987] RSP: 0018:ffffb453e257fdb8 EFLAGS: 00010246
[145237.352990] RAX: ffff8bd0040181c0 RBX: ffff8be68db8f800 RCX: 0000000000000000
[145237.352991] RDX: 000000000000ffff RSI: 0000000000000000 RDI: ffff8be68db8f800
[145237.352993] RBP: ffff8bd0040181c0 R08: 0000000000001000 R09: ffff8bcfd520e000
[145237.352995] R10: 0000000000000000 R11: 00008417b5ab0bc0 R12: 0000000000000005
[145237.352996] R13: ffff8bcee061c0d0 R14: ffff8bd004019640 R15: 0000000000000000
[145237.352998] FS: 0000000000000000(0000) GS:ffff8be5dfb00000(0000) knlGS:0000000000000000
[145237.353000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[145237.353002] CR2: 00007fd81f651d68 CR3: 0000001a0fe10001 CR4: 00000000001726e0
[145237.353003] Call Trace:
[145237.353008] <TASK>
[145237.353011] ice_process_vflr_event+0x8d/0xb0 [ice]
[145237.353049] ice_service_task+0x79f/0xef0 [ice]
[145237.353074] process_one_work+0x1c8/0x390
[145237.353081] ? process_one_work+0x390/0x390
[145237.353084] worker_thread+0x30/0x360
[145237.353087] ? process_one_work+0x390/0x390
[145237.353090] kthread+0xe8/0x110
[145237.353094] ? kthread_complete_and_exit+0x20/0x20
[145237.353097] ret_from_fork+0x22/0x30
[145237.353103] </TASK>
Remove WARN_ON() from check if VSI is null in ice_reset_vf.
Add "VF is already removed\n" in dev_dbg().
This WARN_ON() is unnecessary and causes call trace, despite that
call trace, driver still works. There is no need for this warn
because this piece of code is responsible for disabling VF's Tx/Rx
queues when VF is disabled, but when VF is already removed there
is no need to do reset or disable queues.
Fixes: efe41860008e ("ice: Fix memory corruption in VF driver")
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7fe05e125d5f730bd2d0fc53985bee77b6c762f0 upstream.
In commit b03d519d3460 ("ice: store VF pointer instead of VF ID")
WARN_ON checks were added to validate the vsi->vf pointer and
catch programming errors. However, one check to vsi->vf was missed.
This caused a call trace when resetting VFs.
Fix ice_vsi_rebuild by encompassing VF pointer in WARN_ON check.
Fixes: b03d519d3460 ("ice: store VF pointer instead of VF ID")
Signed-off-by: Benjamin Mikailenko <benjamin.mikailenko@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fd8e899cdb5ecaf8e8ee73854a99e10807eef1de upstream.
If an error occurs in dsa_devlink_region_create(), then 'priv->regions'
array will be accessed by negative index '-1'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Rustam Subkhankulov <subkhankulov@ispras.ru>
Fixes: bf425b82059e ("net: dsa: sja1105: expose static config as devlink region")
Link: https://lore.kernel.org/r/20220817003845.389644-1-subkhankulov@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 173ca86618d751bd183456c9cdbb69952ba283c8 upstream.
This register, used as part of stats->tx_dropped in
ocelot_get_stats64(), has a wrong address. At the address currently
given, there is actually the c_tx_green_prio_6 counter.
Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5152de7b79ab0be150f5966481b0c8f996192531 upstream.
Reading stats using the SYS_COUNT_* register definitions is only used by
ocelot_get_stats64() from the ocelot switchdev driver, however,
currently the bucket definitions are incorrect.
Separately, on both RX and TX, we have the following problems:
- a 256-1023 bucket which actually tracks the 256-511 packets
- the 1024-1526 bucket actually tracks the 512-1023 packets
- the 1527-max bucket actually tracks the 1024-1526 packets
=> nobody tracks the packets from the real 1527-max bucket
Additionally, the RX_PAUSE, RX_CONTROL, RX_LONGS and RX_CLASSIFIED_DROPS
all track the wrong thing. However this doesn't seem to have any
consequence, since ocelot_get_stats64() doesn't use these.
Even though this problem only manifests itself for the switchdev driver,
we cannot split the fix for ocelot and for DSA, since it requires fixing
the bucket definitions from enum ocelot_reg, which makes us necessarily
adapt the structures from felix and seville as well.
Fixes: 84705fc16552 ("net: dsa: felix: introduce support for Seville VSC9953 switch")
Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family")
Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 40d21c4565bce064c73a03b79a157a3493c518b9 upstream.
What the driver actually reports as 256-511 is in fact 512-1023, and the
TX packets in the 256-511 bucket are not reported. Fix that.
Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 36c0d935015766bf20d621c18313f17691bda5e3 upstream.
In the ksz9477_fdb_dump function it reads the ALU control register and
exit from the timeout loop if there is valid entry or search is
complete. After exiting the loop, it reads the alu entry and report to
the user space irrespective of entry is valid. It works till the valid
entry. If the loop exited when search is complete, it reads the alu
table. The table returns all ones and it is reported to user space. So
bridge fdb show gives ff:ff:ff:ff:ff:ff as last entry for every port.
To fix it, after exiting the loop the entry is reported only if it is
valid one.
Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220816105516.18350-1-arun.ramadoss@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3a12df22a8f68954a4ba48435c06b3d1791c87c4 upstream.
dma_map_single() calls fail in moxart_mac_setup_desc_ring() and
moxart_mac_start_xmit() which leads to an incessant output of this:
[ 16.043925] moxart-ethernet 92000000.mac eth0: DMA mapping error
[ 16.050957] moxart-ethernet 92000000.mac eth0: DMA mapping error
[ 16.058229] moxart-ethernet 92000000.mac eth0: DMA mapping error
Passing pdev to DMA is a common approach among net drivers.
Fixes: 6c821bd9edc9 ("net: Add MOXA ART SoCs ethernet driver")
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220812171339.2271788-1-saproj@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a159e986ad26d3f35c0157ac92760ba5e44e6785 upstream.
Currently as part of removing port, PTP API is called to clear the
existing configuration and set the 'rx_filter' and 'tx_type' to zero.
The clearing is done before unregistering the netdevice, which means that
there is a window of time in which the user can reconfigure PTP in the
port, and this configuration will not be cleared.
Reorder the operations, clear PTP configuration after unregistering the
netdevice.
Fixes: 8748642751ede ("mlxsw: spectrum: PTP: Support SIOCGHWTSTAMP, SIOCSHWTSTAMP ioctls")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 95bb633048fab742230eb2cdf20b8e2676240a54 upstream.
Using native endian-ness for device supplied fields is wrong
on BE platforms. Sparse warns about this.
Fixes: 91f41f01d219 ("drivers/net/virtio_net: Added RSS hash report.")
Cc: "Andrew Melnychenko" <andrew@daynix.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 246bbf2f977ea36aaf41f5d24370fef433250728 upstream.
If the port isn't a CPU port nor a user port, 'cpu_dp'
is a null pointer and a crash happened on dereferencing
it in mv88e6060_setup_port():
[ 9.575872] Unable to handle kernel NULL pointer dereference at virtual address 00000014
...
[ 9.942216] mv88e6060_setup from dsa_register_switch+0x814/0xe84
[ 9.948616] dsa_register_switch from mdio_probe+0x2c/0x54
[ 9.954433] mdio_probe from really_probe.part.0+0x98/0x2a0
[ 9.960375] really_probe.part.0 from driver_probe_device+0x30/0x10c
[ 9.967029] driver_probe_device from __device_attach_driver+0xb8/0x13c
[ 9.973946] __device_attach_driver from bus_for_each_drv+0x90/0xe0
[ 9.980509] bus_for_each_drv from __device_attach+0x110/0x184
[ 9.986632] __device_attach from bus_probe_device+0x8c/0x94
[ 9.992577] bus_probe_device from deferred_probe_work_func+0x78/0xa8
[ 9.999311] deferred_probe_work_func from process_one_work+0x290/0x73c
[ 10.006292] process_one_work from worker_thread+0x30/0x4b8
[ 10.012155] worker_thread from kthread+0xd4/0x10c
[ 10.017238] kthread from ret_from_fork+0x14/0x3c
Fixes: 0abfd494deef ("net: dsa: use dedicated CPU port")
CC: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
CC: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220811070939.1717146-1-saproj@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ef0162298abf46b881e4a4d0c604d1a066228647 upstream.
Commit 'c2ed5611afd7' has increased the cpl_t5_pass_accept_rpl{} structure
size by 8B to avoid roundup. cpl_t5_pass_accept_rpl{} is a HW specific
structure and increasing its size will lead to unwanted adapter errors.
Current commit reverts the cpl_t5_pass_accept_rpl{} back to its original
and allocates zeroed skb buffer there by avoiding the memset for iss field.
Reorder code to minimize chip type checks.
Fixes: c2ed5611afd7 ("iw_cxgb4: Use memset_startat() for cpl_t5_pass_accept_rpl")
Link: https://lore.kernel.org/r/20220809184118.2029-1-rahul.lakkireddy@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cbe9e51126305832cf407ee6bb556ce831488ffe upstream.
Fix deadlock that occurs when iavf interface is a part of failover
configuration.
1. Mutex crit_lock is taken at the beginning of iavf_watchdog_task()
2. Function iavf_init_config_adapter() is called when adapter
state is __IAVF_INIT_CONFIG_ADAPTER
3. iavf_init_config_adapter() calls register_netdevice() that emits
NETDEV_REGISTER event
4. Notifier function failover_event() then calls
net_failover_slave_register() that calls dev_open()
5. dev_open() calls iavf_open() that tries to take crit_lock in
end-less loop
Stack trace:
...
[ 790.251876] usleep_range_state+0x5b/0x80
[ 790.252547] iavf_open+0x37/0x1d0 [iavf]
[ 790.253139] __dev_open+0xcd/0x160
[ 790.253699] dev_open+0x47/0x90
[ 790.254323] net_failover_slave_register+0x122/0x220 [net_failover]
[ 790.255213] failover_slave_register.part.7+0xd2/0x180 [failover]
[ 790.256050] failover_event+0x122/0x1ab [failover]
[ 790.256821] notifier_call_chain+0x47/0x70
[ 790.257510] register_netdevice+0x20f/0x550
[ 790.258263] iavf_watchdog_task+0x7c8/0xea0 [iavf]
[ 790.259009] process_one_work+0x1a7/0x360
[ 790.259705] worker_thread+0x30/0x390
To fix the situation we should check the current adapter state after
first unsuccessful mutex_trylock() and return with -EBUSY if it is
__IAVF_INIT_CONFIG_ADAPTER.
Fixes: 226d528512cf ("iavf: fix locking of critical sections")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 31071173771e079f7bc08dacd61e0db913262fbf upstream.
Do not call iavf_close in iavf_reset_task error handling. Doing so can
lead to double call of napi_disable, which can lead to deadlock there.
Removing VF would lead to iavf_remove task being stuck, because it
requires crit_lock, which is held by iavf_close.
Call iavf_disable_vf if reset fail, so that driver will clean up
remaining invalid resources.
During rapid VF resets, HW can fail to setup VF mailbox. Wrong
error handling can lead to iavf_remove being stuck with:
[ 5218.999087] iavf 0000:82:01.0: Failed to init adminq: -53
...
[ 5267.189211] INFO: task repro.sh:11219 blocked for more than 30 seconds.
[ 5267.189520] Tainted: G S E 5.18.0-04958-ga54ce3703613-dirty #1
[ 5267.189764] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 5267.190062] task:repro.sh state:D stack: 0 pid:11219 ppid: 8162 flags:0x00000000
[ 5267.190347] Call Trace:
[ 5267.190647] <TASK>
[ 5267.190927] __schedule+0x460/0x9f0
[ 5267.191264] schedule+0x44/0xb0
[ 5267.191563] schedule_preempt_disabled+0x14/0x20
[ 5267.191890] __mutex_lock.isra.12+0x6e3/0xac0
[ 5267.192237] ? iavf_remove+0xf9/0x6c0 [iavf]
[ 5267.192565] iavf_remove+0x12a/0x6c0 [iavf]
[ 5267.192911] ? _raw_spin_unlock_irqrestore+0x1e/0x40
[ 5267.193285] pci_device_remove+0x36/0xb0
[ 5267.193619] device_release_driver_internal+0xc1/0x150
[ 5267.193974] pci_stop_bus_device+0x69/0x90
[ 5267.194361] pci_stop_and_remove_bus_device+0xe/0x20
[ 5267.194735] pci_iov_remove_virtfn+0xba/0x120
[ 5267.195130] sriov_disable+0x2f/0xe0
[ 5267.195506] ice_free_vfs+0x7d/0x2f0 [ice]
[ 5267.196056] ? pci_get_device+0x4f/0x70
[ 5267.196496] ice_sriov_configure+0x78/0x1a0 [ice]
[ 5267.196995] sriov_numvfs_store+0xfe/0x140
[ 5267.197466] kernfs_fop_write_iter+0x12e/0x1c0
[ 5267.197918] new_sync_write+0x10c/0x190
[ 5267.198404] vfs_write+0x24e/0x2d0
[ 5267.198886] ksys_write+0x5c/0xd0
[ 5267.199367] do_syscall_64+0x3a/0x80
[ 5267.199827] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 5267.200317] RIP: 0033:0x7f5b381205c8
[ 5267.200814] RSP: 002b:00007fff8c7e8c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 5267.201981] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f5b381205c8
[ 5267.202620] RDX: 0000000000000002 RSI: 00005569420ee900 RDI: 0000000000000001
[ 5267.203426] RBP: 00005569420ee900 R08: 000000000000000a R09: 00007f5b38180820
[ 5267.204327] R10: 000000000000000a R11: 0000000000000246 R12: 00007f5b383c06e0
[ 5267.205193] R13: 0000000000000002 R14: 00007f5b383bb880 R15: 0000000000000002
[ 5267.206041] </TASK>
[ 5267.206970] Kernel panic - not syncing: hung_task: blocked tasks
[ 5267.207809] CPU: 48 PID: 551 Comm: khungtaskd Kdump: loaded Tainted: G S E 5.18.0-04958-ga54ce3703613-dirty #1
[ 5267.208726] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.11.0 11/02/2019
[ 5267.209623] Call Trace:
[ 5267.210569] <TASK>
[ 5267.211480] dump_stack_lvl+0x33/0x42
[ 5267.212472] panic+0x107/0x294
[ 5267.213467] watchdog.cold.8+0xc/0xbb
[ 5267.214413] ? proc_dohung_task_timeout_secs+0x30/0x30
[ 5267.215511] kthread+0xf4/0x120
[ 5267.216459] ? kthread_complete_and_exit+0x20/0x20
[ 5267.217505] ret_from_fork+0x22/0x30
[ 5267.218459] </TASK>
Fixes: f0db78928783 ("i40evf: use netdev variable in reset task")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 541a1af451b0cb3779e915d48d08efb17915207b upstream.
Fix possible NULL pointer dereference, due to freeing of adapter->vf_res
in iavf_init_get_resources. Previous commit introduced a regression,
where receiving IAVF_ERR_ADMIN_QUEUE_NO_WORK from iavf_get_vf_config
would free adapter->vf_res. However, netdev is still registered, so
ethtool_ops can be called. Calling iavf_get_link_ksettings with no vf_res,
will result with:
[ 9385.242676] BUG: kernel NULL pointer dereference, address: 0000000000000008
[ 9385.242683] #PF: supervisor read access in kernel mode
[ 9385.242686] #PF: error_code(0x0000) - not-present page
[ 9385.242690] PGD 0 P4D 0
[ 9385.242696] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
[ 9385.242701] CPU: 6 PID: 3217 Comm: pmdalinux Kdump: loaded Tainted: G S E 5.18.0-04958-ga54ce3703613-dirty #1
[ 9385.242708] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.11.0 11/02/2019
[ 9385.242710] RIP: 0010:iavf_get_link_ksettings+0x29/0xd0 [iavf]
[ 9385.242745] Code: 00 0f 1f 44 00 00 b8 01 ef ff ff 48 c7 46 30 00 00 00 00 48 c7 46 38 00 00 00 00 c6 46 0b 00 66 89 46 08 48 8b 87 68 0e 00 00 <f6> 40 08 80 75 50 8b 87 5c 0e 00 00 83 f8 08 74 7a 76 1d 83 f8 20
[ 9385.242749] RSP: 0018:ffffc0560ec7fbd0 EFLAGS: 00010246
[ 9385.242755] RAX: 0000000000000000 RBX: ffffc0560ec7fc08 RCX: 0000000000000000
[ 9385.242759] RDX: ffffffffc0ad4550 RSI: ffffc0560ec7fc08 RDI: ffffa0fc66674000
[ 9385.242762] RBP: 00007ffd1fb2bf50 R08: b6a2d54b892363ee R09: ffffa101dc14fb00
[ 9385.242765] R10: 0000000000000000 R11: 0000000000000004 R12: ffffa0fc66674000
[ 9385.242768] R13: 0000000000000000 R14: ffffa0fc66674000 R15: 00000000ffffffa1
[ 9385.242771] FS: 00007f93711a2980(0000) GS:ffffa0fad72c0000(0000) knlGS:0000000000000000
[ 9385.242775] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 9385.242778] CR2: 0000000000000008 CR3: 0000000a8e61c003 CR4: 00000000003706e0
[ 9385.242781] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 9385.242784] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 9385.242787] Call Trace:
[ 9385.242791] <TASK>
[ 9385.242793] ethtool_get_settings+0x71/0x1a0
[ 9385.242814] __dev_ethtool+0x426/0x2f40
[ 9385.242823] ? slab_post_alloc_hook+0x4f/0x280
[ 9385.242836] ? kmem_cache_alloc_trace+0x15d/0x2f0
[ 9385.242841] ? dev_ethtool+0x59/0x170
[ 9385.242848] dev_ethtool+0xa7/0x170
[ 9385.242856] dev_ioctl+0xc3/0x520
[ 9385.242866] sock_do_ioctl+0xa0/0xe0
[ 9385.242877] sock_ioctl+0x22f/0x320
[ 9385.242885] __x64_sys_ioctl+0x84/0xc0
[ 9385.242896] do_syscall_64+0x3a/0x80
[ 9385.242904] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 9385.242918] RIP: 0033:0x7f93702396db
[ 9385.242923] Code: 73 01 c3 48 8b 0d ad 57 38 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 7d 57 38 00 f7 d8 64 89 01 48
[ 9385.242927] RSP: 002b:00007ffd1fb2bf18 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 9385.242932] RAX: ffffffffffffffda RBX: 000055671b1d2fe0 RCX: 00007f93702396db
[ 9385.242935] RDX: 00007ffd1fb2bf20 RSI: 0000000000008946 RDI: 0000000000000007
[ 9385.242937] RBP: 00007ffd1fb2bf20 R08: 0000000000000003 R09: 0030763066307330
[ 9385.242940] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffd1fb2bf80
[ 9385.242942] R13: 0000000000000007 R14: 0000556719f6de90 R15: 00007ffd1fb2c1b0
[ 9385.242948] </TASK>
[ 9385.242949] Modules linked in: iavf(E) xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nft_compat nf_nat_tftp nft_objref nf_conntrack_tftp bridge stp llc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables rfkill nfnetlink vfat fat irdma ib_uverbs ib_core intel_rapl_msr intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm iTCO_wdt iTCO_vendor_support ice irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel rapl i40e pcspkr intel_cstate joydev mei_me intel_uncore mxm_wmi mei ipmi_ssif lpc_ich ipmi_si acpi_power_meter xfs libcrc32c mgag200 i2c_algo_bit drm_shmem_helper drm_kms_helper sd_mod t10_pi crc64_rocksoft crc64 syscopyarea sg sysfillrect sysimgblt fb_sys_fops drm ixgbe ahci libahci libata crc32c_intel mdio dca wmi dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse
[ 9385.243065] [last unloaded: iavf]
Dereference happens in if (ADV_LINK_SUPPORT(adapter)) statement
Fixes: 209f2f9c7181 ("iavf: Add support for VIRTCHNL_VF_OFFLOAD_VLAN_V2 negotiation")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 419831617ed349992c84344dbd9e627f9e68f842 upstream.
iavf_alloc_asq_bufs/iavf_alloc_arq_bufs allocates with dma_alloc_coherent
memory for VF mailbox.
Free DMA regions for both ASQ and ARQ in case error happens during
configuration of ASQ/ARQ registers.
Without this change it is possible to see when unloading interface:
74626.583369: dma_debug_device_change: device driver has pending DMA allocations while released from device [count=32]
One of leaked entries details: [device address=0x0000000b27ff9000] [size=4096 bytes] [mapped with DMA_BIDIRECTIONAL] [mapped as coherent]
Fixes: d358aa9a7a2d ("i40evf: init code and hardware support")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e34f49348f8b7a53205b6f77707a3a6a40cf420b upstream.
We should trace the allocated address instead of page struct.
Fixes: 27c874867c4e ("dpaa2-eth: Use a single page per Rx buffer")
Signed-off-by: Chen Lin <chen.lin5@zte.com.cn>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20220811151651.3327-1-chen45464546@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b4ab94d6adaa5cf842b68bd28f4b50bc774496bd upstream.
The current code retrieves the TOS field after the lookup
on the ipv4 routing table. The routing process currently
only allows routing based on the original 3 TOS bits, and
not on the full 6 DSCP bits.
As a result the retrieved TOS is cut to the 3 bits.
However for inheriting purposes the full 6 bits should be used.
Extract the full 6 bits before the route lookup and use
that instead of the cut off 3 TOS bits.
Fixes: e305ac6cf5a1 ("geneve: Add support to collect tunnel metadata.")
Signed-off-by: Matthias May <matthias.may@westermo.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/20220805190006.8078-1-matthias.may@westermo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b3bb8628bf64440065976c71e4ab09186c393597 upstream.
If tsnep_tx_map() fails, then tsnep_tx_unmap() shall start at the write
index like tsnep_tx_map(). This is different to the normal operation.
Thus, add an additional parameter to tsnep_tx_unmap() to enable start at
different positions for successful TX and failed TX.
Fixes: 403f69bbdbad ("tsnep: Add TSN endpoint Ethernet MAC driver")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4ae97cae07e15d41e5c0ebabba64c6eefdeb0bbe upstream.
The port flag isn't set to `NFP_PORT_CHANGED` when using
`ethtool -m DEVNAME` before, so the port state (e.g. interface)
cannot be updated. Therefore, it caused that `ethtool -m DEVNAME`
sometimes cannot read the correct information.
E.g. `ethtool -m DEVNAME` cannot work when load driver before plug
in optical module, as the port interface is still NONE without port
update.
Now update the port state before sending info to NIC to ensure that
port interface is correct (latest state).
Fixes: 61f7c6f44870 ("nfp: implement ethtool get module EEPROM")
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yu Xiao <yu.xiao@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220802093355.69065-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bc3c8fe3c79bcdae4d90e3726054fac5cca8ac32 upstream.
WARNING: suspicious RCU usage
5.2.0-rc2-00605-g2638eb8b50cfc #1 Not tainted
drivers/net/plip/plip.c:1110 suspicious rcu_dereference_check() usage!
plip_open is called with RTNL held, switch to the correct helper.
Fixes: 2638eb8b50cf ("net: ipv4: provide __rcu annotation for ifa_list")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20220807115304.13257-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bcb0da7fffee9464073998b267ce5543da2356d2 upstream.
According to Guillaume Nault RT_TOS should never be used for IPv6.
Quote:
RT_TOS() is an old macro used to interprete IPv4 TOS as described in
the obsolete RFC 1349. It's conceptually wrong to use it even in IPv4
code, although, given the current state of the code, most of the
existing calls have no consequence.
But using RT_TOS() in IPv6 code is always a bug: IPv6 never had a "TOS"
field to be interpreted the RFC 1349 way. There's no historical
compatibility to worry about.
Fixes: ce99f6b97fcd ("net/mlx5e: Support SRIOV TC encapsulation offloads for IPv6 tunnels")
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Matthias May <matthias.may@westermo.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e488d4f5d6e4cd1e728ba4ddbdcd7ef5f4d13a21 upstream.
According to Guillaume Nault RT_TOS should never be used for IPv6.
Quote:
RT_TOS() is an old macro used to interprete IPv4 TOS as described in
the obsolete RFC 1349. It's conceptually wrong to use it even in IPv4
code, although, given the current state of the code, most of the
existing calls have no consequence.
But using RT_TOS() in IPv6 code is always a bug: IPv6 never had a "TOS"
field to be interpreted the RFC 1349 way. There's no historical
compatibility to worry about.
Fixes: 1400615d64cf ("vxlan: allow setting ipv6 traffic class")
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Matthias May <matthias.may@westermo.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ca2bb69514a8bc7f83914122f0d596371352416c upstream.
According to Guillaume Nault RT_TOS should never be used for IPv6.
Quote:
RT_TOS() is an old macro used to interprete IPv4 TOS as described in
the obsolete RFC 1349. It's conceptually wrong to use it even in IPv4
code, although, given the current state of the code, most of the
existing calls have no consequence.
But using RT_TOS() in IPv6 code is always a bug: IPv6 never had a "TOS"
field to be interpreted the RFC 1349 way. There's no historical
compatibility to worry about.
Fixes: 3a56f86f1be6 ("geneve: handle ipv6 priority like ipv4 tos")
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Matthias May <matthias.may@westermo.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c3c290276927a3ae79342a4e17ec0500c138c63a upstream.
Given a field with its location/offset in input packet,
the key checking logic verifies whether extracting the
field can be supported or not based on the mkex profile
loaded in hardware. This logic is wrong wrt source mac
and this patch fixes that.
Fixes: 9b179a960a96 ("octeontx2-af: Generate key field bit mask from KEX profile")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3f8fe40ab7730cf8eb6f8b8ff412012f7f6f8f48 upstream.
The teardown sequence in FLR handler returns if no NIX LF
is attached to PF/VF because it indicates that graceful
shutdown of resources already happened. But there is a
chance of all allocated MCAM entries not being freed by
PF/VF. Hence free mcam entries even in case of detached LF.
Fixes: c554f9c1574e ("octeontx2-af: Teardown NPA, NIX LF upon receiving FLR")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cf2437626502b5271d19686b03dea306efe17ea0 upstream.
The packet parser profile supplied as firmware may not
be present all the time and default profile is used mostly.
Hence suppress firmware loading warning from kernel due to
absence of firmware in kernel image.
Fixes: 3a7244152f9c ("octeontx2-af: add support for custom KPU entries")
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dd1d1a8a6b29b6b472fd0d449b29eb806c411dd2 upstream.
NPC_PARSE_NIBBLE for TX interface has to be equal to the RX one for some
silicon revisions. Mistakenly this fixup was only applied to the default
MKEX profile while it should also be applied to any loaded profile.
Fixes: 1c1935c9945d ("octeontx2-af: Add NIX1 interfaces to NPC")
Signed-off-by: Stanislaw Kardach <skardach@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 13c9f4dc102f2856e80b92486c41841e25e23772 upstream.
For packets scheduled to RPM and LBK, NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL]
selects the TL3 or TL2 scheduling level as the one used for link/channel
selection and backpressure. For each scheduling queue at the selected
level: Setting NIX_AF_TL3_TL2(0..255)_LINK(0..12)_CFG[ENA] = 1 allows
the TL3/TL2 queue to schedule packets to a specified RPM or LBK link
and channel.
There is an issue in the code where NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL]
is set to TL3 where as the NIX_AF_TL3_TL2(0..255)_LINK(0..12)_CFG is
configured for TL2 queue in some cases. As a result packets will not
transmit on that link/channel. This patch fixes the issue by configuring
the NIX_AF_TL3_TL2(0..255)_LINK(0..12)_CFG register depending on the
NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL] value.
Fixes: caa2da34fd25a ("octeontx2-pf: Initialize and config queues")
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Link: https://lore.kernel.org/r/20220802142813.25031-1-naveenm@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1b7680c6c1f6de9904f1d9b05c952f0c64a03350 upstream.
On one of our machines we got:
kernel BUG at lib/dynamic_queue_limits.c:27!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
CPU: 0 PID: 1166 Comm: irq/41-bgmac Tainted: G W O 4.14.275-rt132 #1
Hardware name: BRCM XGS iProc
task: ee3415c0 task.stack: ee32a000
PC is at dql_completed+0x168/0x178
LR is at bgmac_poll+0x18c/0x6d8
pc : [<c03b9430>] lr : [<c04b5a18>] psr: 800a0313
sp : ee32be14 ip : 000005ea fp : 00000bd4
r10: ee558500 r9 : c0116298 r8 : 00000002
r7 : 00000000 r6 : ef128810 r5 : 01993267 r4 : 01993851
r3 : ee558000 r2 : 000070e1 r1 : 00000bd4 r0 : ee52c180
Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 12c5387d Table: 8e88c04a DAC: 00000051
Process irq/41-bgmac (pid: 1166, stack limit = 0xee32a210)
Stack: (0xee32be14 to 0xee32c000)
be00: ee558520 ee52c100 ef128810
be20: 00000000 00000002 c0116298 c04b5a18 00000000 c0a0c8c4 c0951780 00000040
be40: c0701780 ee558500 ee55d520 ef05b340 ef6f9780 ee558520 00000001 00000040
be60: ffffe000 c0a56878 ef6fa040 c0952040 0000012c c0528744 ef6f97b0 fffcfb6a
be80: c0a04104 2eda8000 c0a0c4ec c0a0d368 ee32bf44 c0153534 ee32be98 ee32be98
bea0: ee32bea0 ee32bea0 ee32bea8 ee32bea8 00000000 c01462e4 ffffe000 ef6f22a8
bec0: ffffe000 00000008 ee32bee4 c0147430 ffffe000 c094a2a8 00000003 ffffe000
bee0: c0a54528 00208040 0000000c c0a0c8c4 c0a65980 c0124d3c 00000008 ee558520
bf00: c094a23c c0a02080 00000000 c07a9910 ef136970 ef136970 ee30a440 ef136900
bf20: ee30a440 00000001 ef136900 ee30a440 c016d990 00000000 c0108db0 c012500c
bf40: ef136900 c016da14 ee30a464 ffffe000 00000001 c016dd14 00000000 c016db28
bf60: ffffe000 ee21a080 ee30a400 00000000 ee32a000 ee30a440 c016dbfc ee25fd70
bf80: ee21a09c c013edcc ee32a000 ee30a400 c013ec7c 00000000 00000000 00000000
bfa0: 00000000 00000000 00000000 c0108470 00000000 00000000 00000000 00000000
bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[<c03b9430>] (dql_completed) from [<c04b5a18>] (bgmac_poll+0x18c/0x6d8)
[<c04b5a18>] (bgmac_poll) from [<c0528744>] (net_rx_action+0x1c4/0x494)
[<c0528744>] (net_rx_action) from [<c0124d3c>] (do_current_softirqs+0x1ec/0x43c)
[<c0124d3c>] (do_current_softirqs) from [<c012500c>] (__local_bh_enable+0x80/0x98)
[<c012500c>] (__local_bh_enable) from [<c016da14>] (irq_forced_thread_fn+0x84/0x98)
[<c016da14>] (irq_forced_thread_fn) from [<c016dd14>] (irq_thread+0x118/0x1c0)
[<c016dd14>] (irq_thread) from [<c013edcc>] (kthread+0x150/0x158)
[<c013edcc>] (kthread) from [<c0108470>] (ret_from_fork+0x14/0x24)
Code: a83f15e0 0200001a 0630a0e1 c3ffffea (f201f0e7)
The issue seems similar to commit 90b3b339364c ("net: hisilicon: Fix a BUG
trigered by wrong bytes_compl") and potentially introduced by commit
b38c83dd0866 ("bgmac: simplify tx ring index handling").
If there is an RX interrupt between setting ring->end
and netdev_sent_queue() we can hit the BUG_ON as bgmac_dma_tx_free()
can miscalculate the queue size while called from bgmac_poll().
The machine which triggered the BUG runs a v4.14 RT kernel - but the issue
seems present in mainline too.
Fixes: b38c83dd0866 ("bgmac: simplify tx ring index handling")
Signed-off-by: Sandor Bodo-Merle <sbodomerle@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220808173939.193804-1-sbodomerle@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4c46bb49460ee14c69629e813640d8b929e88941 upstream.
The way in which dsa_tree_change_tag_proto() works is that when
dsa_tree_notify() fails, it doesn't know whether the operation failed
mid way in a multi-switch tree, or it failed for a single-switch tree.
So even though drivers need to fail cleanly in
ds->ops->change_tag_protocol(), DSA will still call dsa_tree_notify()
again, to restore the old tag protocol for potential switches in the
tree where the change did succeeed (before failing for others).
This means for the felix driver that if we report an error in
felix_change_tag_protocol(), we'll get another call where proto_ops ==
old_proto_ops. If we proceed to act upon that, we may do unexpected
things. For example, we will call dsa_tag_8021q_register() twice in a
row, without any dsa_tag_8021q_unregister() in between. Then we will
actually call dsa_tag_8021q_unregister() via old_proto_ops->teardown,
which (if it manages to run at all, after walking through corrupted data
structures) will leave the ports inoperational anyway.
The bug can be readily reproduced if we force an error while in
tag_8021q mode; this crashes the kernel.
echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging
echo edsa > /sys/class/net/eno2/dsa/tagging # -EPROTONOSUPPORT
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000014
Call trace:
vcap_entry_get+0x24/0x124
ocelot_vcap_filter_del+0x198/0x270
felix_tag_8021q_vlan_del+0xd4/0x21c
dsa_switch_tag_8021q_vlan_del+0x168/0x2cc
dsa_switch_event+0x68/0x1170
dsa_tree_notify+0x14/0x34
dsa_port_tag_8021q_vlan_del+0x84/0x110
dsa_tag_8021q_unregister+0x15c/0x1c0
felix_tag_8021q_teardown+0x16c/0x180
felix_change_tag_protocol+0x1bc/0x230
dsa_switch_event+0x14c/0x1170
dsa_tree_change_tag_proto+0x118/0x1c0
Fixes: 7a29d220f4c0 ("net: dsa: felix: reimplement tagging protocol change with function pointers")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220808125127.3344094-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
specified
commit 3702e4041cfda50bc697363d29511ce8f6b24795 upstream.
In case master/slave clock role is not specified (which is default), the
aneg registers will not be written.
The visible impact of this is missing pause advertisement.
So, rework genphy_c45_baset1_an_config_aneg() to be able to write
advertisement registers even if clock role is unknown.
Fixes: 3da8ffd8545f ("net: phy: Add 10BASE-T1L support in phy-c45")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220805073159.908643-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bc3410f250219660a7be032c01c954a53b2c26ab upstream.
Avoid the PHY library call unnecessarily into the suspend/resume functions by
setting phydev->mac_managed_pm to true. The GENET driver essentially does
exactly what mdio_bus_phy_resume() does by calling phy_init_hw() plus
phy_resume().
Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220804173605.1266574-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 744d23c71af39c7dc77ac7c3cac87ae86a181a85 upstream.
Calling mdio_bus_phy_resume() with neither the PHY state machine set to
PHY_HALTED nor phydev->mac_managed_pm set to true is a good indication
that we can produce a race condition looking like this:
CPU0 CPU1
bcmgenet_resume
-> phy_resume
-> phy_init_hw
-> phy_start
-> phy_resume
phy_start_aneg()
mdio_bus_phy_resume
-> phy_resume
-> phy_write(..., BMCR_RESET)
-> usleep() -> phy_read()
with the phy_resume() function triggering a PHY behavior that might have
to be worked around with (see bf8bfc4336f7 ("net: phy: broadcom: Fix
brcm_fet_config_init()") for instance) that ultimately leads to an error
reading from the PHY.
Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220801233403.258871-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7a542bee27c6a57e45c33cbbdc963325fd6493af upstream.
When we call xdp_convert_buff_to_frame() to get xdpf, if it returns
NULL, we should check if xdp_page was allocated by xdp_linearize_page().
If it is newly allocated, it should be freed here alone. Just like any
other "goto err_xdp".
Fixes: 44fa2dbd4759 ("xdp: transition into using xdp_frame for ndo_xdp_xmit")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2ba5e47fb75fbb8fab45f5c1bc8d5c33d8834bd3 upstream.
The final update statement of the for loop exceeds the array range, the
dereference of self->aq_vec[i] is not checked and then leads to the
index out of range error.
Also fixed this kind of coding style in other for loop.
[ 97.937604] UBSAN: array-index-out-of-bounds in drivers/net/ethernet/aquantia/atlantic/aq_nic.c:1404:48
[ 97.937607] index 8 is out of range for type 'aq_vec_s *[8]'
[ 97.937608] CPU: 38 PID: 3767 Comm: kworker/u256:18 Not tainted 5.19.0+ #2
[ 97.937610] Hardware name: Dell Inc. Precision 7865 Tower/, BIOS 1.0.0 06/12/2022
[ 97.937611] Workqueue: events_unbound async_run_entry_fn
[ 97.937616] Call Trace:
[ 97.937617] <TASK>
[ 97.937619] dump_stack_lvl+0x49/0x63
[ 97.937624] dump_stack+0x10/0x16
[ 97.937626] ubsan_epilogue+0x9/0x3f
[ 97.937627] __ubsan_handle_out_of_bounds.cold+0x44/0x49
[ 97.937629] ? __scm_send+0x348/0x440
[ 97.937632] ? aq_vec_stop+0x72/0x80 [atlantic]
[ 97.937639] aq_nic_stop+0x1b6/0x1c0 [atlantic]
[ 97.937644] aq_suspend_common+0x88/0x90 [atlantic]
[ 97.937648] aq_pm_suspend_poweroff+0xe/0x20 [atlantic]
[ 97.937653] pci_pm_suspend+0x7e/0x1a0
[ 97.937655] ? pci_pm_suspend_noirq+0x2b0/0x2b0
[ 97.937657] dpm_run_callback+0x54/0x190
[ 97.937660] __device_suspend+0x14c/0x4d0
[ 97.937661] async_suspend+0x23/0x70
[ 97.937663] async_run_entry_fn+0x33/0x120
[ 97.937664] process_one_work+0x21f/0x3f0
[ 97.937666] worker_thread+0x4a/0x3c0
[ 97.937668] ? process_one_work+0x3f0/0x3f0
[ 97.937669] kthread+0xf0/0x120
[ 97.937671] ? kthread_complete_and_exit+0x20/0x20
[ 97.937672] ret_from_fork+0x22/0x30
[ 97.937676] </TASK>
v2. fixed "warning: variable 'aq_vec' set but not used"
v3. simplified a for loop
Fixes: 97bde5c4f909 ("net: ethernet: aquantia: Support for NIC-specific code")
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Link: https://lore.kernel.org/r/20220808081845.42005-1-acelan.kao@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
