summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2022-05-16Merge tag 'mt76-for-kvalo-2022-05-12' of https://github.com/nbd168/wirelessKalle Valo41-415/+1598
mt76 patches for 5.19 - tx locking improvements - wireless ethernet dispatch support for flow offload - non-standard VHT MCS10-11 support - fixes - runtime PM improvements - mt7921 AP mode support - mt7921 ipv6 NS offload support
2022-05-16net: hinic: add missing destroy_workqueue in hinic_pf_to_mgmt_initZheng Bin1-0/+2
hinic_pf_to_mgmt_init misses destroy_workqueue in error path, this patch fixes that. Fixes: 6dbb89014dc3 ("hinic: fix sending mailbox timeout in aeq event work") Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-16mlx5: support BIG TCP packetsEric Dumazet2-23/+89
mlx5 supports LSOv2. IPv6 gro/tcp stacks insert a temporary Hop-by-Hop header with JUMBO TLV for big packets. We need to ignore/skip this HBH header when populating TX descriptor. Note that ipv6_has_hopopt_jumbo() only recognizes very specific packet layout, thus mlx5e_sq_xmit_wqe() is taking care of this layout only. v7: adopt unsafe_memcpy() and MLX5_UNSAFE_MEMCPY_DISCLAIMER v2: clear hopbyhop in mlx5e_tx_get_gso_ihs() v4: fix compile error for CONFIG_MLX5_CORE_IPOIB=y Signed-off-by: Coco Li <lixiaoyan@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Cc: Saeed Mahameed <saeedm@nvidia.com> Cc: Leon Romanovsky <leon@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-16mlx4: support BIG TCP packetsEric Dumazet2-9/+41
mlx4 supports LSOv2 just fine. IPv6 stack inserts a temporary Hop-by-Hop header with JUMBO TLV for big packets. We need to ignore the HBH header when populating TX descriptor. Tested: Before: (not enabling bigger TSO/GRO packets) ip link set dev eth0 gso_max_size 65536 gro_max_size 65536 netperf -H lpaa18 -t TCP_RR -T2,2 -l 10 -Cc -- -r 70000,70000 MIGRATED TCP REQUEST/RESPONSE TEST from ::0 (::) port 0 AF_INET6 to lpaa18.prod.google.com () port 0 AF_INET6 : first burst 0 : cpu bind Local /Remote Socket Size Request Resp. Elapsed Trans. CPU CPU S.dem S.dem Send Recv Size Size Time Rate local remote local remote bytes bytes bytes bytes secs. per sec % S % S us/Tr us/Tr 262144 540000 70000 70000 10.00 6591.45 0.86 1.34 62.490 97.446 262144 540000 After: (enabling bigger TSO/GRO packets) ip link set dev eth0 gso_max_size 185000 gro_max_size 185000 netperf -H lpaa18 -t TCP_RR -T2,2 -l 10 -Cc -- -r 70000,70000 MIGRATED TCP REQUEST/RESPONSE TEST from ::0 (::) port 0 AF_INET6 to lpaa18.prod.google.com () port 0 AF_INET6 : first burst 0 : cpu bind Local /Remote Socket Size Request Resp. Elapsed Trans. CPU CPU S.dem S.dem Send Recv Size Size Time Rate local remote local remote bytes bytes bytes bytes secs. per sec % S % S us/Tr us/Tr 262144 540000 70000 70000 10.00 8383.95 0.95 1.01 54.432 57.584 262144 540000 Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Acked-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-16veth: enable BIG TCP packetsEric Dumazet1-0/+1
Set the TSO driver limit to GSO_MAX_SIZE (512 KB). This allows the admin/user to set a GSO limit up to this value. ip link set dev veth10 gso_max_size 200000 Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-16net: loopback: enable BIG TCP packetsEric Dumazet1-0/+2
Set the driver limit to GSO_MAX_SIZE (512 KB). This allows the admin/user to set a GSO limit up to this value. Tested: ip link set dev lo gso_max_size 200000 netperf -H ::1 -t TCP_RR -l 100 -- -r 80000,80000 & tcpdump shows : 18:28:42.962116 IP6 ::1 > ::1: HBH 40051 > 63780: Flags [P.], seq 3626480001:3626560001, ack 3626560001, win 17743, options [nop,nop,TS val 3771179265 ecr 3771179265], length 80000 18:28:42.962138 IP6 ::1.63780 > ::1.40051: Flags [.], ack 3626560001, win 17743, options [nop,nop,TS val 3771179265 ecr 3771179265], length 0 18:28:42.962152 IP6 ::1 > ::1: HBH 63780 > 40051: Flags [P.], seq 3626560001:3626640001, ack 3626560001, win 17743, options [nop,nop,TS val 3771179265 ecr 3771179265], length 80000 18:28:42.962157 IP6 ::1.40051 > ::1.63780: Flags [.], ack 3626640001, win 17743, options [nop,nop,TS val 3771179265 ecr 3771179265], length 0 18:28:42.962180 IP6 ::1 > ::1: HBH 40051 > 63780: Flags [P.], seq 3626560001:3626640001, ack 3626640001, win 17743, options [nop,nop,TS val 3771179265 ecr 3771179265], length 80000 18:28:42.962214 IP6 ::1.63780 > ::1.40051: Flags [.], ack 3626640001, win 17743, options [nop,nop,TS val 3771179266 ecr 3771179265], length 0 18:28:42.962228 IP6 ::1 > ::1: HBH 63780 > 40051: Flags [P.], seq 3626640001:3626720001, ack 3626640001, win 17743, options [nop,nop,TS val 3771179266 ecr 3771179265], length 80000 18:28:42.962233 IP6 ::1.40051 > ::1.63780: Flags [.], ack 3626720001, win 17743, options [nop,nop,TS val 3771179266 ecr 3771179266], length 0 Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-16net: allow gro_max_size to exceed 65536Alexander Duyck1-1/+1
Allow the gro_max_size to exceed a value larger than 65536. There weren't really any external limitations that prevented this other than the fact that IPv4 only supports a 16 bit length field. Since we have the option of adding a hop-by-hop header for IPv6 we can allow IPv6 to exceed this value and for IPv4 and non-TCP flows we can cap things at 65536 via a constant rather than relying on gro_max_size. [edumazet] limit GRO_MAX_SIZE to (8 * 65535) to avoid overflows. Signed-off-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-16net: allow gso_max_size to exceed 65536Alexander Duyck7-7/+12
The code for gso_max_size was added originally to allow for debugging and workaround of buggy devices that couldn't support TSO with blocks 64K in size. The original reason for limiting it to 64K was because that was the existing limits of IPv4 and non-jumbogram IPv6 length fields. With the addition of Big TCP we can remove this limit and allow the value to potentially go up to UINT_MAX and instead be limited by the tso_max_size value. So in order to support this we need to go through and clean up the remaining users of the gso_max_size value so that the values will cap at 64K for non-TCPv6 flows. In addition we can clean up the GSO_MAX_SIZE value so that 64K becomes GSO_LEGACY_MAX_SIZE and UINT_MAX will now be the upper limit for GSO_MAX_SIZE. v6: (edumazet) fixed a compile error if CONFIG_IPV6=n, in a new sk_trim_gso_size() helper. netif_set_tso_max_size() caps the requested TSO size with GSO_MAX_SIZE. Signed-off-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-16ravb: Add support for RZ/V2MPhil Edworthy1-0/+26
RZ/V2M Ethernet is very similar to R-Car Gen3 Ethernet-AVB, though some small parts are the same as R-Car Gen2. Other differences to R-Car Gen3 and Gen2 are: * It has separate data (DI), error (Line 1) and management (Line 2) irqs rather than one irq for all three. * Instead of using the High-speed peripheral bus clock for gPTP, it has a separate gPTP reference clock. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-16ravb: Use separate clock for gPTPPhil Edworthy2-3/+21
RZ/V2M has a separate gPTP reference clock that is used when the AVB-DMAC Mode Register (CCC) gPTP Clock Select (CSEL) bits are set to "01: High-speed peripheral bus clock". Therefore, add a feature that allows this clock to be used for gPTP. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-16ravb: Support separate Line0 (Desc), Line1 (Err) and Line2 (Mgmt) irqsPhil Edworthy2-6/+53
R-Car has a combined interrupt line, ch22 = Line0_DiA | Line1_A | Line2_A. RZ/V2M has separate interrupt lines for each of these, so add a feature that allows the driver to get these interrupts and call the common handler. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-16ravb: Separate handling of irq enable/disable regs into featurePhil Edworthy3-5/+7
Currently, when the HW has a single interrupt, the driver uses the GIC, TIC, RIC0 registers to enable and disable interrupts. When the HW has multiple interrupts, it uses the GIE, GID, TIE, TID, RIE0, RID0 registers. However, other devices, e.g. RZ/V2M, have multiple irqs and only have the GIC, TIC, RIC0 registers. Therefore, split this into a separate feature. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-16Merge tag 'linux-can-fixes-for-5.18-20220514' of ↵David S. Miller3-65/+10
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2022-05-14 this is a pull request of 2 patches for net/master. Changes to linux-can-fixes-for-5.18-20220513: - adjusted Fixes: Tag on "Revert "can: m_can: pci: use custom bit timings for Elkhart Lake"" (Thanks Jakub) Both patches are by Jarkko Nikula, target the m_can PCI driver bindings, and fix usage of wrong bit timing constants for the Elkhart Lake platform. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-16mac80211: extend current rate control tx status APIJonas Jelonek2-4/+9
This patch adds the new struct ieee80211_rate_status and replaces 'struct rate_info *rate' in ieee80211_tx_status with pointer and length annotation. The struct ieee80211_rate_status allows to: (1) receive tx power status feedback for transmit power control (TPC) per packet or packet retry (2) dynamic mapping of wifi chip specific multi-rate retry (mrr) chains with different lengths (3) increase the limit of annotatable rate indices to support IEEE802.11ac rate sets and beyond ieee80211_tx_info, control and status buffer, and ieee80211_tx_rate cannot be used to achieve these goals due to fixed size limitations. Our new struct contains a struct rate_info to annotate the rate that was used, retry count of the rate and tx power. It is intended for all information related to RC and TPC that needs to be passed from driver to mac80211 and its RC/TPC algorithms like Minstrel_HT. It corresponds to one stage in an mrr. Multiple subsequent instances of this struct can be included in struct ieee80211_tx_status via a pointer and a length variable. Those instances can be allocated on-stack. The former reference to a single instance of struct rate_info is replaced with our new annotation. An extension is introduced to struct ieee80211_hw. There are two new members called 'tx_power_levels' and 'max_txpwr_levels_idx' acting as a tx power level table. When a wifi device is registered, the driver shall supply all supported power levels in this list. This allows to support several quirks like differing power steps in power level ranges or alike. TPC can use this for algorithm and thus be designed more abstract instead of handling all possible step widths individually. Further mandatory changes in status.c, mt76 and ath11k drivers due to the removal of 'struct rate_info *rate' are also included. status.c already uses the information in ieee80211_tx_status->rate in radiotap, this is now changed to use ieee80211_rate_status->rate_idx. mt76 driver already uses struct rate_info to pass the tx rate to status path. The new members of the ieee80211_tx_status are set to NULL and 0 because the previously passed rate is not relevant to rate control and accurate information is passed via tx_info->status.rates. For ath11k, the txrate can be passed via this struct because ath11k uses firmware RC and thus the information does not interfere with software RC. Compile-Tested: current wireless-next tree with all flags on Tested-on: Xiaomi 4A Gigabit (MediaTek MT7603E, MT7612E) with OpenWrt Linux 5.10.113 Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com> Link: https://lore.kernel.org/r/20220509173958.1398201-2-jelonek.jonas@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-14can: m_can: remove support for custom bit timing, take #2Jarkko Nikula2-21/+6
Now when Intel Elkhart Lake uses again common bit timing and there are no other users for custom bit timing, we can bring back the changes done by the commit 0ddd83fbebbc ("can: m_can: remove support for custom bit timing"). This effectively reverts commit ea768b2ffec6 ("Revert "can: m_can: remove support for custom bit timing"") while taking into account commit ea22ba40debe ("can: m_can: make custom bittiming fields const") and commit 7d4a101c0bd3 ("can: dev: add sanity check in can_set_static_ctrlmode()"). Link: https://lore.kernel.org/all/20220512124144.536850-2-jarkko.nikula@linux.intel.com Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-05-14Revert "can: m_can: pci: use custom bit timings for Elkhart Lake"Jarkko Nikula1-44/+4
This reverts commit 0e8ffdf3b86dfd44b651f91b12fcae76c25c453b. Commit 0e8ffdf3b86d ("can: m_can: pci: use custom bit timings for Elkhart Lake") broke the test case using bitrate switching. | ip link set can0 up type can bitrate 500000 dbitrate 4000000 fd on | ip link set can1 up type can bitrate 500000 dbitrate 4000000 fd on | candump can0 & | cangen can1 -I 0x800 -L 64 -e -fb \ | -D 11223344deadbeef55667788feedf00daabbccdd44332211 -n 1 -v -v Above commit does everything correctly according to the datasheet. However datasheet wasn't correct. I got confirmation from hardware engineers that the actual CAN hardware on Intel Elkhart Lake is based on M_CAN version v3.2.0. Datasheet was mirroring values from an another specification which was based on earlier M_CAN version leading to wrong bit timings. Therefore revert the commit and switch back to common bit timings. Fixes: ea4c1787685d ("can: m_can: pci: use custom bit timings for Elkhart Lake") Link: https://lore.kernel.org/all/20220512124144.536850-1-jarkko.nikula@linux.intel.com Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reported-by: Chee Hou Ong <chee.houx.ong@intel.com> Reported-by: Aman Kumar <aman.kumar@intel.com> Reported-by: Pallavi Kumari <kumari.pallavi@intel.com> Cc: <stable@vger.kernel.org> # v5.16+ Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-05-14net: macb: Increment rx bd head after allocating skb and bufferHarini Katakam1-1/+1
In gem_rx_refill rx_prepared_head is incremented at the beginning of the while loop preparing the skb and data buffers. If the skb or data buffer allocation fails, this BD will be unusable BDs until the head loops back to the same BD (and obviously buffer allocation succeeds). In the unlikely event that there's a string of allocation failures, there will be an equal number of unusable BDs and an inconsistent RX BD chain. Hence increment the head at the end of the while loop to be clean. Fixes: 4df95131ea80 ("net/macb: change RX path for GEM") Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220512171900.32593-1-harini.katakam@xilinx.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-14ice: Expose RSS indirection tables for queue groups via ethtoolSridhar Samudrala1-18/+51
When ADQ queue groups (TCs) are created via tc mqprio command, RSS contexts and associated RSS indirection tables are configured automatically per TC based on the queue ranges specified for each traffic class. For ex: tc qdisc add dev enp175s0f0 root mqprio num_tc 3 map 0 1 2 \ queues 2@0 8@2 4@10 hw 1 mode channel will create 3 queue groups (TC 0-2) with queue ranges 2, 8 and 4 in 3 queue groups. Each queue group is associated with its own RSS context and RSS indirection table. Add support to expose RSS indirection tables for all ADQ queue groups using ethtool RSS contexts interface. ethtool -x enp175s0f0 context <tc-num> Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220512213249.3747424-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-14ixgbe: add xdp frags support to ndo_xdp_xmitLorenzo Bianconi1-36/+63
Add the capability to map non-linear xdp frames in XDP_TX and ndo_xdp_xmit callback. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220512212621.3746140-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-14eth: sfc: remove remnants of the out-of-tree napi_weight module paramJakub Kicinski3-21/+3
Remove napi_weight statics which are set to 64 and never modified, remnants of the out-of-tree napi_weight module param. Acked-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://lore.kernel.org/r/20220512205603.1536771-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-13Merge branch 'master' of ↵Jakub Kicinski6-16/+15
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2022-05-13 1) Cleanups for the code behind the XFRM offload API. This is a preparation for the extension of the API for policy offload. From Leon Romanovsky. * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next: xfrm: drop not needed flags variable in XFRM offload struct net/mlx5e: Use XFRM state direction instead of flags netdevsim: rely on XFRM state direction instead of flags ixgbe: propagate XFRM offload state direction instead of flags xfrm: store and rely on direction to construct offload flags xfrm: rename xfrm_state_offload struct to allow reuse xfrm: delete not used number of external headers xfrm: free not used XFRM_ESP_NO_TRAILER flag ==================== Link: https://lore.kernel.org/r/20220513151218.4010119-1-steffen.klassert@secunet.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-13sfc: siena: Fix Kconfig dependenciesRen Zhijie1-0/+1
If CONFIG_PTP_1588_CLOCK=m and CONFIG_SFC_SIENA=y, the siena driver will fail to link: drivers/net/ethernet/sfc/siena/ptp.o: In function `efx_ptp_remove_channel': ptp.c:(.text+0xa28): undefined reference to `ptp_clock_unregister' drivers/net/ethernet/sfc/siena/ptp.o: In function `efx_ptp_probe_channel': ptp.c:(.text+0x13a0): undefined reference to `ptp_clock_register' ptp.c:(.text+0x1470): undefined reference to `ptp_clock_unregister' drivers/net/ethernet/sfc/siena/ptp.o: In function `efx_ptp_pps_worker': ptp.c:(.text+0x1d29): undefined reference to `ptp_clock_event' drivers/net/ethernet/sfc/siena/ptp.o: In function `efx_siena_ptp_get_ts_info': ptp.c:(.text+0x301b): undefined reference to `ptp_clock_index' To fix this build error, make SFC_SIENA depends on PTP_1588_CLOCK. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: d48523cb88e0 ("sfc: Copy shared files needed for Siena (part 2)") Signed-off-by: Ren Zhijie <renzhijie2@huawei.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Link: https://lore.kernel.org/r/20220513012721.140871-1-renzhijie2@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-13bnxt_en: parse and report result field when NVRAM package install failsKalesh AP3-13/+72
Instead of always returning -ENOPKG, decode the firmware error code further when the HWRM_NVM_INSTALL_UPDATE firmware call fails. Return a more suitable error code to userspace and log an error in dmesg. This is version 2 of the earlier patch that was reverted: 02acd399533e ("bnxt_en: parse result field when NVRAM package install fails") In this new version, if the call is made through devlink instead of ethtool, we'll also set the error message in extack. Link: https://lore.kernel.org/netdev/20220307141358.4d52462e@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/ Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13bnxt_en: Enable packet timestamping for all RX packetsPavan Chebbi4-3/+36
Add driver support to enable timestamping on all RX packets that are received by the NIC. This capability can be requested by the applications using SIOCSHWTSTAMP ioctl with filter type HWTSTAMP_FILTER_ALL. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13bnxt_en: Configure ptp filters during bnxt openPavan Chebbi3-13/+46
For correctness, we need to configure the packet filters for timestamping during bnxt_open. This way they are always configured after firmware reset or chip reset. We should not assume that the filters will always be retained across resets. This patch modifies the ioctl handler and always configures the PTP filters in the bnxt_open() path. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13bnxt_en: Update firmware interface to 1.10.2.95Michael Chan1-135/+280
The main changes are timestamp support for all RX packets and new PCIe statistics. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13net: axienet: Use NAPI for TX completion pathRobert Hancock2-85/+111
This driver was using the TX IRQ handler to perform all TX completion tasks. Under heavy TX network load, this can cause significant irqs-off latencies (found to be in the hundreds of microseconds using ftrace). This can cause other issues, such as overrunning serial UART FIFOs when using high baud rates with limited UART FIFO sizes. Switch to using a NAPI poll handler to perform the TX completion work to get this out of hard IRQ context and avoid the IRQ latency impact. A separate poll handler is used for TX and RX since they have separate IRQs on this controller, so that the completion work for each of them stays on the same CPU as the interrupt. Testing on a Xilinx MPSoC ZU9EG platform using iperf3 from a Linux PC through a switch at 1G link speed showed no significant change in TX or RX throughput, with approximately 941 Mbps before and after. Hard IRQ time in the TX throughput test was significantly reduced from 12% to below 1% on the CPU handling TX interrupts, with total hard+soft IRQ CPU usage dropping from about 56% down to 48%. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13net: axienet: Be more careful about updating tx_bd_tailRobert Hancock1-11/+15
The axienet_start_xmit function was updating the tx_bd_tail variable multiple times, with potential rollbacks on error or invalid intermediate positions, even though this variable is also used in the TX completion path. Use READ_ONCE where this variable is read and WRITE_ONCE where it is written to make this update more atomic, and move the write before the MMIO write to start the transfer, so it is protected by that implicit write barrier. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13net: ipa: get rid of a duplicate initializationAlex Elder1-1/+1
In ipa_qmi_ready(), the "ipa" local variable is set when initialized, but then set again just before it's first used. One or the other is enough, so get rid of the first one. References: https://lore.kernel.org/lkml/200de1bd-0f01-c334-ca18-43eed783dfac@intel.com/ Reported-by: kernel test robot <lkp@intel.com> Fixes: 530f9216a953 ("soc: qcom: ipa: AP/modem communications") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13net: ipa: record proper RX transaction countAlex Elder1-2/+4
Each time we are notified that some number of transactions on an RX channel has completed, we record the number of bytes that have been transferred since the previous notification. We also track the number of transactions completed, but that is not currently being calculated correctly; we're currently counting the number of such notifications, but each notification can represent many transaction completions. Fix this. Fixes: 650d1603825d8 ("soc: qcom: ipa: the generic software interface") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13net: ipa: certain dropped packets aren't accounted forAlex Elder1-7/+6
If an RX endpoint receives packets containing status headers, and a packet in the buffer is not dropped, ipa_endpoint_skb_copy() is responsible for wrapping the packet data in an SKB and forwarding it to ipa_modem_skb_rx() for further processing. If ipa_endpoint_skb_copy() gets a null pointer from build_skb(), it just returns early. But in the process it doesn't record that as a dropped packet in the network device statistics. Instead, call ipa_modem_skb_rx() whether or not the SKB pointer is NULL; that function ensures the statistics are properly updated. Fixes: 1b65bbcc9a710 ("net: ipa: skip SKB copy if no netdev") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13net: phy: smsc: Cope with hot-removal in interrupt handlerLukas Wunner1-1/+3
If reading the Interrupt Source Flag register fails with -ENODEV, then the PHY has been hot-removed and the correct response is to bail out instead of throwing a WARN splat and attempting to suspend the PHY. The PHY should be stopped in due course anyway as the kernel asynchronously tears down the device. Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500 Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514 Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13net: phy: smsc: Cache interrupt maskLukas Wunner1-13/+11
Cache the interrupt mask to avoid re-reading it from the PHY upon every interrupt. This will simplify a subsequent commit which detects hot-removal in the interrupt handler and bails out. Analyzing and debugging PHY transactions also becomes simpler if such redundant reads are avoided. Last not least, interrupt overhead and latency is slightly improved. Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500 Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514 Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13usbnet: smsc95xx: Forward PHY interrupts to PHY driver to avoid pollingLukas Wunner1-52/+61
Link status of SMSC LAN95xx chips is polled once per second, even though they're capable of signaling PHY interrupts through the MAC layer. Forward those interrupts to the PHY driver to avoid polling. Benefits are reduced bus traffic, reduced CPU overhead and quicker interface bringup. Polling was introduced in 2016 by commit d69d16949346 ("usbnet: smsc95xx: fix link detection for disabled autonegotiation"). Back then, the LAN95xx driver neglected to enable the ENERGYON interrupt, hence couldn't detect link-up events when auto-negotiation was disabled. The proper solution would have been to enable the ENERGYON interrupt instead of polling. Since then, PHY handling was moved from the LAN95xx driver to the SMSC PHY driver with commit 05b35e7eb9a1 ("smsc95xx: add phylib support"). That PHY driver is capable of link detection with auto-negotiation disabled because it enables the ENERGYON interrupt. Note that signaling interrupts through the MAC layer not only works with the integrated PHY, but also with an external PHY, provided its interrupt pin is attached to LAN95xx's nPHY_INT pin. In the unlikely event that the interrupt pin of an external PHY is attached to a GPIO of the SoC (or not connected at all), the driver can be amended to retrieve the irq from the PHY's of_node. To forward PHY interrupts to phylib, it is not sufficient to call phy_mac_interrupt(). Instead, the PHY's interrupt handler needs to run so that PHY interrupts are cleared. That's because according to page 119 of the LAN950x datasheet, "The source of this interrupt is a level. The interrupt persists until it is cleared in the PHY." https://www.microchip.com/content/dam/mchp/documents/UNG/ProductDocuments/DataSheets/LAN950x-Data-Sheet-DS00001875D.pdf Therefore, create an IRQ domain with a single IRQ for the PHY. In the future, the IRQ domain may be extended to support the 11 GPIOs on the LAN95xx. Normally the PHY interrupt should be masked until the PHY driver has cleared it. However masking requires a (sleeping) USB transaction and interrupts are received in (non-sleepable) softirq context. I decided not to mask the interrupt at all (by using the dummy_irq_chip's noop ->irq_mask() callback): The USB interrupt endpoint is polled in 1 msec intervals and normally that's sufficient to wake the PHY driver's IRQ thread and have it clear the interrupt. If it does take longer, worst thing that can happen is the IRQ thread is woken again. No big deal. Because PHY interrupts are now perpetually enabled, there's no need to selectively enable them on suspend. So remove all invocations of smsc95xx_enable_phy_wakeup_interrupts(). In smsc95xx_resume(), move the call of phy_init_hw() before usbnet_resume() (which restarts the status URB) to ensure that the PHY is fully initialized when an interrupt is handled. Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500 Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514 Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> # from a PHY perspective Cc: Andre Edich <andre.edich@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13usbnet: smsc95xx: Avoid link settings race on interrupt receptionLukas Wunner1-7/+9
When a PHY interrupt is signaled, the SMSC LAN95xx driver updates the MAC full duplex mode and PHY flow control registers based on cached data in struct phy_device: smsc95xx_status() # raises EVENT_LINK_RESET usbnet_deferred_kevent() smsc95xx_link_reset() # uses cached data in phydev Simultaneously, phylib polls link status once per second and updates that cached data: phy_state_machine() phy_check_link_status() phy_read_status() lan87xx_read_status() genphy_read_status() # updates cached data in phydev If smsc95xx_link_reset() wins the race against genphy_read_status(), the registers may be updated based on stale data. E.g. if the link was previously down, phydev->duplex is set to DUPLEX_UNKNOWN and that's what smsc95xx_link_reset() will use, even though genphy_read_status() may update it to DUPLEX_FULL afterwards. PHY interrupts are currently only enabled on suspend to trigger wakeup, so the impact of the race is limited, but we're about to enable them perpetually. Avoid the race by delaying execution of smsc95xx_link_reset() until phy_state_machine() has done its job and calls back via smsc95xx_handle_link_change(). Signaling EVENT_LINK_RESET on wakeup is not necessary because phylib picks up link status changes through polling. So drop the declaration of a ->link_reset() callback. Note that the semicolon on a line by itself added in smsc95xx_status() is a placeholder for a function call which will be added in a subsequent commit. That function call will actually handle the INT_ENP_PHY_INT_ interrupt. Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500 Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514 Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13usbnet: smsc95xx: Don't reset PHY behind PHY driver's backLukas Wunner1-18/+0
smsc95xx_reset() resets the PHY behind the PHY driver's back, which seems like a bad idea generally. Remove that portion of the function. We're about to use PHY interrupts instead of polling to detect link changes on SMSC LAN95xx chips. Because smsc95xx_reset() is called from usbnet_open(), PHY interrupt settings are lost whenever the net_device is brought up. There are two other callers of smsc95xx_reset(), namely smsc95xx_bind() and smsc95xx_reset_resume(), and both may indeed benefit from a PHY reset. However they already perform one through their calls to phy_connect_direct() and phy_init_hw(). Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500 Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514 Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: Martyn Welch <martyn.welch@collabora.com> Cc: Gabriel Hojda <ghojda@yo2urs.ro> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13usbnet: smsc95xx: Don't clear read-only PHY interruptLukas Wunner1-4/+0
Upon receiving data from the Interrupt Endpoint, the SMSC LAN95xx driver attempts to clear the signaled interrupts by writing "all ones" to the Interrupt Status Register. However the driver only ever enables a single type of interrupt, namely the PHY Interrupt. And according to page 119 of the LAN950x datasheet, its bit in the Interrupt Status Register is read-only. There's no other way to clear it than in a separate PHY register: https://www.microchip.com/content/dam/mchp/documents/UNG/ProductDocuments/DataSheets/LAN950x-Data-Sheet-DS00001875D.pdf Consequently, writing "all ones" to the Interrupt Status Register is pointless and can be dropped. Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500 Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514 Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13usbnet: Run unregister_netdev() before unbind() againLukas Wunner3-10/+5
Commit 2c9d6c2b871d ("usbnet: run unbind() before unregister_netdev()") sought to fix a use-after-free on disconnect of USB Ethernet adapters. It turns out that a different fix is necessary to address the issue: https://lore.kernel.org/netdev/18b3541e5372bc9b9fc733d422f4e698c089077c.1650177997.git.lukas@wunner.de/ So the commit was not necessary. The commit made binding and unbinding of USB Ethernet asymmetrical: Before, usbnet_probe() first invoked the ->bind() callback and then register_netdev(). usbnet_disconnect() mirrored that by first invoking unregister_netdev() and then ->unbind(). Since the commit, the order in usbnet_disconnect() is reversed and no longer mirrors usbnet_probe(). One consequence is that a PHY disconnected (and stopped) in ->unbind() is afterwards stopped once more by unregister_netdev() as it closes the netdev before unregistering. That necessitates a contortion in ->stop() because the PHY may only be stopped if it hasn't already been disconnected. Reverting the commit allows making the call to phy_stop() unconditional in ->stop(). Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500 Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514 Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Oliver Neukum <oneukum@suse.com> Cc: Martyn Welch <martyn.welch@collabora.com> Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13net: ethernet: fix platform_no_drv_owner.cocci warningYang Li1-1/+0
Remove .owner field if calls are used which set it automatically. ./drivers/net/ethernet/sunplus/spl2sw_driver.c:569:3-8: No need to set .owner here. The core will do it. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13net: ethernet: Use swap() instead of open coding itJiapeng Chong1-16/+4
Clean the following coccicheck warning: ./drivers/net/ethernet/sunplus/spl2sw_driver.c:217:27-28: WARNING opportunity for swap(). ./drivers/net/ethernet/sunplus/spl2sw_driver.c:222:27-28: WARNING opportunity for swap(). Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13mt76: mt7921: add ipv6 NS offload supportDeren Wu5-1/+147
Add ipv6 NS offload for WoWLAN state. Tested in this way: 1. Put device-A into WoW state. 2. ping6 from device-B to device-A. 3. In sniffer, see Neighbour advertisement from device-A. Reviewed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: add gfp to mt76_mcu_msg_alloc signatureLorenzo Bianconi2-5/+12
Introduce __mt76_mcu_msg_alloc utility routine in order to specify gfp flags for mcu message allocation. Acked-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: add more statistics from fw_util debugfs knobsRyder Lee3-4/+21
Print out exception state and program counters of WA/WM MCUs. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: improve error handling for fw_debug knobsRyder Lee2-25/+37
In case fw.debug_wm/wa might be unavailable. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7615/mt7915: do reset_work with mt76's work queueBo Jiao2-2/+2
reset_work may be blocked when mcu message timeout occurs Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: add support for 6G in-band discoveryMeiChia Chiu6-14/+107
Add offloading FILS discovery and unsolicited broadcast probe response support. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: add Wireless Ethernet Dispatch supportFelix Fietkau18-94/+502
This is used to support hardware flow offloading from Ethernet to WLAN Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: make number of tokens configurable dynamicallyFelix Fietkau3-7/+7
Preparation for adding Wireless Ethernet Dispatch support Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: add support for overriding the device used for DMA mappingFelix Fietkau3-17/+19
WED support requires using non-coherent DMA, whereas the PCI device might be configured for coherent DMA. The WED driver will take care of changing the PCI HIF coherent IO setting on attach. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: dma: add wrapper macro for accessing queue registersFelix Fietkau1-9/+12
Preparation for adding indirection used for Wireless Ethernet Dispatch support Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-04 02:09:32 +0300