summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2021-01-09mwifiex: Fix possible buffer overflows in mwifiex_cmd_802_11_ad_hoc_startZhang Xiaohui1-0/+2
[ Upstream commit 5c455c5ab332773464d02ba17015acdca198f03d ] mwifiex_cmd_802_11_ad_hoc_start() calls memcpy() without checking the destination size may trigger a buffer overflower, which a local user could use to cause denial of service or the execution of arbitrary code. Fix it by putting the length check before calling memcpy(). Signed-off-by: Zhang Xiaohui <ruc_zhangxiaohui@163.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201206084801.26479-1-ruc_zhangxiaohui@163.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30mt76: add back the SUPPORTS_REORDERING_BUFFER flagFelix Fietkau1-0/+1
commit ed89b89330b521f20682ead6bf93e1014b21a200 upstream. It was accidentally dropped while adding multiple wiphy support Fixes fast-rx support and avoids handling reordering in both mac80211 and the driver Cc: stable@vger.kernel.org Fixes: c89d36254155 ("mt76: add function for allocating an extra wiphy") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30xen/xenbus: Add 'will_handle' callback support in xenbus_watch_path()SeongJae Park1-1/+1
commit 2e85d32b1c865bec703ce0c962221a5e955c52c2 upstream. Some code does not directly make 'xenbus_watch' object and call 'register_xenbus_watch()' but use 'xenbus_watch_path()' instead. This commit adds support of 'will_handle' callback in the 'xenbus_watch_path()' and it's wrapper, 'xenbus_watch_pathfmt()'. This is part of XSA-349 Cc: stable@vger.kernel.org Signed-off-by: SeongJae Park <sjpark@amazon.de> Reported-by: Michael Kurth <mku@amazon.de> Reported-by: Pawel Wieczorkiewicz <wipawel@amazon.de> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30xen/xenbus: Allow watches discard events before queueingSeongJae Park1-0/+4
commit fed1755b118147721f2c87b37b9d66e62c39b668 upstream. If handling logics of watch events are slower than the events enqueue logic and the events can be created from the guests, the guests could trigger memory pressure by intensively inducing the events, because it will create a huge number of pending events that exhausting the memory. Fortunately, some watch events could be ignored, depending on its handler callback. For example, if the callback has interest in only one single path, the watch wouldn't want multiple pending events. Or, some watches could ignore events to same path. To let such watches to volutarily help avoiding the memory pressure situation, this commit introduces new watch callback, 'will_handle'. If it is not NULL, it will be called for each new event just before enqueuing it. Then, if the callback returns false, the event will be discarded. No watch is using the callback for now, though. This is part of XSA-349 Cc: stable@vger.kernel.org Signed-off-by: SeongJae Park <sjpark@amazon.de> Reported-by: Michael Kurth <mku@amazon.de> Reported-by: Pawel Wieczorkiewicz <wipawel@amazon.de> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30virtio_net: Fix error code in probe()Dan Carpenter1-0/+1
[ Upstream commit 411ea23a76526e6efed0b601abb603d3c981b333 ] Set a negative error code intead of returning success if the MTU has been changed to something invalid. Fixes: fe36cbe0671e ("virtio_net: clear MTU when out of range") Reported-by: Robert Buhren <robert.buhren@sect.tu-berlin.de> Reported-by: Felicitas Hetzelt <file@sect.tu-berlin.de> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/X8pGVJSeeCdII1Ys@mwanda Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30nfp: move indirect block cleanup to flower app stop callbackSimon Horman1-3/+3
[ Upstream commit 5b33afee93a1e7665a5ffae027fc66f9376f4ea7 ] The indirect block cleanup may cause control messages to be sent if offloaded flows are present. However, by the time the flower app cleanup callback is called txbufs are no longer available and attempts to send control messages result in a NULL-pointer dereference in nfp_ctrl_tx_one(). This problem may be resolved by moving the indirect block cleanup to the stop callback, where txbufs are still available. As suggested by Jakub Kicinski and Louis Peens. Fixes: a1db217861f3 ("net: flow_offload: fix flow_indr_dev_unregister path") Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Louis Peens <louis.peens@netronome.com> Link: https://lore.kernel.org/r/20201216145701.30005-1-simon.horman@netronome.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30qlcnic: Fix error code in probeDan Carpenter1-0/+1
[ Upstream commit 0d52848632a357948028eab67ff9b7cc0c12a0fb ] Return -EINVAL if we can't find the correct device. Currently it returns success. Fixes: 13159183ec7a ("qlcnic: 83xx base driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/X9nHbMqEyI/xPfGd@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30net: korina: fix return valueVincent Stehlé1-1/+1
[ Upstream commit 7eb000bdbe7c7da811ef51942b356f6e819b13ba ] The ndo_start_xmit() method must not attempt to free the skb to transmit when returning NETDEV_TX_BUSY. Therefore, make sure the korina_send_packet() function returns NETDEV_TX_OK when it frees a packet. Fixes: ef11291bcd5f ("Add support the Korina (IDT RC32434) Ethernet MAC") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20201214220952.19935-1-vincent.stehle@laposte.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30net: allwinner: Fix some resources leak in the error handling path of the ↵Christophe JAILLET1-2/+5
probe and in the remove function [ Upstream commit 322e53d1e2529ae9d501f5e0f20604a79b873aef ] 'irq_of_parse_and_map()' should be balanced by a corresponding 'irq_dispose_mapping()' call. Otherwise, there is some resources leaks. Add such a call in the error handling path of the probe function and in the remove function. Fixes: 492205050d77 ("net: Add EMAC ethernet driver found on Allwinner A10 SoC's") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20201214202117.146293-1-christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30net: mscc: ocelot: Fix a resource leak in the error handling path of the ↵Christophe JAILLET1-1/+7
probe function [ Upstream commit f87675b836b324d270fd52f1f5e6d6bb9f4bd1d5 ] In case of error after calling 'ocelot_init()', it must be undone by a corresponding 'ocelot_deinit()' call, as already done in the remove function. Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201213114838.126922-1-christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30net: bcmgenet: Fix a resource leak in an error handling path in the probe ↵Christophe JAILLET1-1/+3
functin [ Upstream commit 4375ada01963d1ebf733d60d1bb6e5db401e1ac6 ] If the 'register_netdev()' call fails, we must undo a previous 'bcmgenet_mii_init()' call. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20201212182005.120437-1-christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30dpaa2-eth: fix the size of the mapped SGT bufferIoana Ciornei1-1/+1
[ Upstream commit 54a57d1c449275ee727154ac106ec1accae012e3 ] This patch fixes an error condition triggered when the code path which transmits a S/G frame descriptor when the skb's headroom is not enough for DPAA2's needs. We are greated with a splat like the one below when a SGT structure is recycled and that is because even though a dma_unmap is performed on the Tx confirmation path, the unmap is not done with the proper size. [ 714.464927] WARNING: CPU: 13 PID: 0 at drivers/iommu/io-pgtable-arm.c:281 __arm_lpae_map+0x2d4/0x30c (...) [ 714.465343] Call trace: [ 714.465348] __arm_lpae_map+0x2d4/0x30c [ 714.465353] __arm_lpae_map+0x114/0x30c [ 714.465357] __arm_lpae_map+0x114/0x30c [ 714.465362] __arm_lpae_map+0x114/0x30c [ 714.465366] arm_lpae_map+0xf4/0x180 [ 714.465373] arm_smmu_map+0x4c/0xc0 [ 714.465379] __iommu_map+0x100/0x2bc [ 714.465385] iommu_map_atomic+0x20/0x30 [ 714.465391] __iommu_dma_map+0xb0/0x110 [ 714.465397] iommu_dma_map_page+0xb8/0x120 [ 714.465404] dma_map_page_attrs+0x1a8/0x210 [ 714.465413] __dpaa2_eth_tx+0x384/0xbd0 [fsl_dpaa2_eth] [ 714.465421] dpaa2_eth_tx+0x84/0x134 [fsl_dpaa2_eth] [ 714.465427] dev_hard_start_xmit+0x10c/0x2b0 [ 714.465433] sch_direct_xmit+0x1a0/0x550 (...) The dpaa2-eth driver uses an area of software annotations to transmit necessary information from the Tx path to the Tx confirmation one. This SWA structure has a different layout for each kind of frame that we are dealing with: linear, S/G or XDP. The commit referenced was incorrectly setting up the 'sgt_size' field for the S/G type of SWA even though we are dealing with a linear skb here. Fixes: d70446ee1f40 ("dpaa2-eth: send a scatter-gather FD instead of realloc-ing") Reported-by: Daniel Thompson <daniel.thompson@linaro.org> Tested-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20201211171607.108034-1-ciorneiioana@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30net: dsa: qca: ar9331: fix sleeping function called from invalid context bugOleksij Rempel1-9/+24
[ Upstream commit 3e47495fc4de4122598dd51ae8527b09b8209646 ] With lockdep enabled, we will get following warning: ar9331_switch ethernet.1:10 lan0 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:00] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13) BUG: sleeping function called from invalid context at kernel/locking/mutex.c:935 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 18, name: kworker/0:1 INFO: lockdep is turned off. irq event stamp: 602 hardirqs last enabled at (601): [<8073fde0>] _raw_spin_unlock_irq+0x3c/0x80 hardirqs last disabled at (602): [<8073a4f4>] __schedule+0x184/0x800 softirqs last enabled at (0): [<80080f60>] copy_process+0x578/0x14c8 softirqs last disabled at (0): [<00000000>] 0x0 CPU: 0 PID: 18 Comm: kworker/0:1 Not tainted 5.10.0-rc3-ar9331-00734-g7d644991df0c #31 Workqueue: events deferred_probe_work_func Stack : 80980000 80980000 8089ef70 80890000 804b5414 80980000 00000002 80b53728 00000000 800d1268 804b5414 ffffffde 00000017 800afe08 81943860 0f5bfc32 00000000 00000000 8089ef70 819436c0 ffffffea 00000000 00000000 00000000 8194390c 808e353c 0000000f 66657272 80980000 00000000 00000000 80890000 804b5414 80980000 00000002 80b53728 00000000 00000000 00000000 80d40000 ... Call Trace: [<80069ce0>] show_stack+0x9c/0x140 [<800afe08>] ___might_sleep+0x220/0x244 [<8073bfb0>] __mutex_lock+0x70/0x374 [<8073c2e0>] mutex_lock_nested+0x2c/0x38 [<804b5414>] regmap_update_bits_base+0x38/0x8c [<804ee584>] regmap_update_bits+0x1c/0x28 [<804ee714>] ar9331_sw_unmask_irq+0x34/0x60 [<800d91f0>] unmask_irq+0x48/0x70 [<800d93d4>] irq_startup+0x114/0x11c [<800d65b4>] __setup_irq+0x4f4/0x6d0 [<800d68a0>] request_threaded_irq+0x110/0x190 [<804e3ef0>] phy_request_interrupt+0x4c/0xe4 [<804df508>] phylink_bringup_phy+0x2c0/0x37c [<804df7bc>] phylink_of_phy_connect+0x118/0x130 [<806c1a64>] dsa_slave_create+0x3d0/0x578 [<806bc4ec>] dsa_register_switch+0x934/0xa20 [<804eef98>] ar9331_sw_probe+0x34c/0x364 [<804eb48c>] mdio_probe+0x44/0x70 [<8049e3b4>] really_probe+0x30c/0x4f4 [<8049ea10>] driver_probe_device+0x264/0x26c [<8049bc10>] bus_for_each_drv+0xb4/0xd8 [<8049e684>] __device_attach+0xe8/0x18c [<8049ce58>] bus_probe_device+0x48/0xc4 [<8049db70>] deferred_probe_work_func+0xdc/0xf8 [<8009ff64>] process_one_work+0x2e4/0x4a0 [<800a0770>] worker_thread+0x2a8/0x354 [<800a774c>] kthread+0x16c/0x174 [<8006306c>] ret_from_kernel_thread+0x14/0x1c ar9331_switch ethernet.1:10 lan1 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:02] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13) DSA: tree 0 setup To fix it, it is better to move access to MDIO register to the .irq_bus_sync_unlock call back. Fixes: ec6698c272de ("net: dsa: add support for Atheros AR9331 built-in switch") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20201211110317.17061-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30i40e, xsk: clear the status bits for the next_to_use descriptorBjörn Töpel1-1/+4
[ Upstream commit 64050b5b8706d304ba647591b06e1eddc55e8bd9 ] On the Rx side, the next_to_use index points to the next item in the HW ring to be refilled/allocated, and next_to_clean points to the next item to potentially be processed. When the HW Rx ring is fully refilled, i.e. no packets has been processed, the next_to_use will be next_to_clean - 1. When the ring is fully processed next_to_clean will be equal to next_to_use. The latter case is where a bug is triggered. If the next_to_use bits are not cleared, and the "fully processed" state is entered, a stale descriptor can be processed. The skb-path correctly clear the status bit for the next_to_use descriptor, but the AF_XDP zero-copy path did not do that. This change adds the status bits clearing of the next_to_use descriptor. Fixes: 3b4f0b66c2b3 ("i40e, xsk: Migrate to new MEM_TYPE_XSK_BUFF_POOL") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ice, xsk: clear the status bits for the next_to_use descriptorBjörn Töpel1-1/+4
[ Upstream commit 8d14768a7972b92c73259f0c9c45b969d85e3a60 ] On the Rx side, the next_to_use index points to the next item in the HW ring to be refilled/allocated, and next_to_clean points to the next item to potentially be processed. When the HW Rx ring is fully refilled, i.e. no packets has been processed, the next_to_use will be next_to_clean - 1. When the ring is fully processed next_to_clean will be equal to next_to_use. The latter case is where a bug is triggered. If the next_to_use bits are not cleared, and the "fully processed" state is entered, a stale descriptor can be processed. The skb-path correctly clear the status bit for the next_to_use descriptor, but the AF_XDP zero-copy path did not do that. This change adds the status bits clearing of the next_to_use descriptor. Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30lan743x: fix rx_napi_poll/interrupt ping-pongSven Van Asbroeck1-20/+23
[ Upstream commit 57030a0b620f735bf557696e5ceb9f32c2b3bb8f ] Even if there is more rx data waiting on the chip, the rx napi poll fn will never run more than once - it will always read a few buffers, then bail out and re-arm interrupts. Which results in ping-pong between napi and interrupt. This defeats the purpose of napi, and is bad for performance. Fix by making the rx napi poll behave identically to other ethernet drivers: 1. initialize rx napi polling with an arbitrary budget (64). 2. in the polling fn, return full weight if rx queue is not depleted, this tells the napi core to "keep polling". 3. update the rx tail ("ring the doorbell") once for every 8 processed rx ring buffers. Thanks to Jakub Kicinski, Eric Dumazet and Andrew Lunn for their expert opinions and suggestions. Tested with 20 seconds of full bandwidth receive (iperf3): rx irqs softirqs(NET_RX) ----------------------------- before 23827 33620 after 129 4081 Tested-by: Sven Van Asbroeck <thesven73@gmail.com> # lan7430 Fixes: 23f0703c125be ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Link: https://lore.kernel.org/r/20201215161954.5950-1-TheSven73@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ath11k: Fix incorrect tlvs in scan start commandPradeep Kumar Chitrapu1-31/+0
[ Upstream commit f57ad6a9885e8399897daee3249cabccf9c972f8 ] Currently 6G specific tlvs have duplicate entries which is causing scan failures. Fix this by removing the duplicate entries of the same tlv. This also fixes out-of-bound memory writes caused due to adding tlvs when num_hint_bssid and num_hint_s_ssid are ZEROs. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01386-QCAHKSWPL_SILICONZ-1 Fixes: 74601ecfef6e ("ath11k: Add support for 6g scan hint") Reported-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607609124-17250-7-git-send-email-kvalo@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30can: m_can: m_can_config_endisable(): remove double clearing of clock stop ↵Sean Nyekjaer1-4/+0
request bit [ Upstream commit c9f4cad6cdfe350ce2637e57f7f2aa7ff326bcc6 ] The CSR bit is already cleared when arriving here so remove this section of duplicate code. The registers set in m_can_config_endisable() is set to same exact values as before this patch. Signed-off-by: Sean Nyekjaer <sean@geanix.com> Acked-by: Sriram Dash <sriram.dash@samsung.com> Acked-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20191211063227.84259-1-sean@geanix.com Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30iwlwifi: mvm: hook up missing RX handlersJohannes Berg1-0/+6
[ Upstream commit 8a59d39033c35bb484f6bd91891db86ebe07fdc2 ] The RX handlers for probe response data and channel switch weren't hooked up properly, fix that. Fixes: 86e177d80ff7 ("iwlwifi: mvm: add NOA and CSA to a probe response") Fixes: d3a108a48dc6 ("iwlwifi: mvm: Support CSA countdown offloading") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.2d07dcee0d35.I07a61b5d734478db57d9434ff303e4c90bf6c32b@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30iwlwifi: dbg-tlv: fix old length in is_trig_data_contained()Johannes Berg1-1/+1
[ Upstream commit 58a1c9f9a9b6b9092ae10b84f6b571a06596e296 ] There's a bug in the lengths - the 'old length' needs to be calculated using the 'old' pointer, of course, likely a copy/paste mistake. Fix this. Reported-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Fixes: cf29c5b66b9f ("iwlwifi: dbg_ini: implement time point handling") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.c0105ddffa74.I1ddb243053ff763c91b663748b6a593ecc3b5634@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30adm8211: fix error return code in adm8211_probe()Zhang Changzhong1-2/+4
[ Upstream commit 05c2a61d69ea306e891884a86486e1ef37c4b78d ] Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: cc0b88cf5ecf ("[PATCH] Add adm8211 802.11b wireless driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607071638-33619-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30mt76: fix tkip configuration for mt7615/7663 devicesLorenzo Bianconi1-6/+8
[ Upstream commit 930e0eaddf810cfa90e114a0df02f48539e1346f ] Fix Tx-Rx MIC overwrite during TKIP hw key configuration Fixes: 01cfc1b45421 ("mt76: mt7615: add BIP_CMAC_128 cipher support") Tested-by: YN Chen <yn.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30mt76: fix memory leak if device probing failsLorenzo Bianconi5-6/+11
[ Upstream commit bc348defcc6eceeb4f7784bf9a263ddb72fd3fb4 ] Run mt76_free_device instead of ieee80211_free_hw if device probing fails in order to remove the already allocated mt76 workqueue Fixes: a86f1d01f5ce5 ("mt76: move mt76 workqueue in common code") Fixes: f1d962369d568 ("mt76: mt7915: implement HE per-rate tx power support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30net/mlx5: Properly convey driver version to firmwareLeon Romanovsky1-1/+5
[ Upstream commit 907af0f0cab4ee5d5604f182ecec2c5b5119d294 ] mlx5 firmware expects driver version in specific format X.X.X, so make it always correct and based on real kernel version aligned with the driver. Fixes: 012e50e109fd ("net/mlx5: Set driver version into firmware") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30mt76: dma: fix possible deadlock running mt76_dma_cleanupLorenzo Bianconi1-0/+2
[ Upstream commit 5f0ce5848733b86deaba1c6d102e20479230b20a ] Fix the following possible deadlock reported by lockdep disabling BH running mt76_free_pending_txwi() ================================ WARNING: inconsistent lock state 5.9.0-rc6 #14 Not tainted -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. rmmod/1227 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff888156a83530 (&dev->lock#2){+.?.}-{2:2}, at: mt76_dma_cleanup+0x125/0x150 [mt76] {IN-SOFTIRQ-W} state was registered at: __lock_acquire+0x20c/0x6b0 lock_acquire+0x9d/0x220 _raw_spin_lock+0x2c/0x70 mt76_dma_tx_cleanup+0xc7/0x200 [mt76] mt76x02_poll_tx+0x31/0xb0 [mt76x02_lib] napi_poll+0x3a/0x100 net_rx_action+0xa8/0x200 __do_softirq+0xc4/0x430 asm_call_on_stack+0xf/0x20 do_softirq_own_stack+0x49/0x60 irq_exit_rcu+0x9a/0xd0 common_interrupt+0xa4/0x190 asm_common_interrupt+0x1e/0x40 irq event stamp: 9915 hardirqs last enabled at (9915): [<ffffffff8124e286>] __free_pages_ok+0x336/0x3b0 hardirqs last disabled at (9914): [<ffffffff8124e24e>] __free_pages_ok+0x2fe/0x3b0 softirqs last enabled at (9912): [<ffffffffa03aa672>] mt76_dma_rx_cleanup+0xa2/0x120 [mt76] softirqs last disabled at (9846): [<ffffffffa03aa5ea>] mt76_dma_rx_cleanup+0x1a/0x120 [mt76] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&dev->lock#2); <Interrupt> lock(&dev->lock#2); *** DEADLOCK *** 1 lock held by rmmod/1227: #0: ffff88815b5eb240 (&dev->mutex){....}-{3:3}, at: driver_detach+0xb5/0x110 stack backtrace: CPU: 1 PID: 1227 Comm: rmmod Kdump: loaded Not tainted 5.9.0-rc6-wdn-src+ #14 Hardware name: Dell Inc. Studio XPS 1340/0K183D, BIOS A11 09/08/2009 Call Trace: dump_stack+0x77/0xa0 mark_lock_irq.cold+0x15/0x39 mark_lock+0x1fc/0x500 mark_usage+0xc7/0x140 __lock_acquire+0x20c/0x6b0 ? find_held_lock+0x2b/0x80 ? sched_clock_cpu+0xc/0xb0 lock_acquire+0x9d/0x220 ? mt76_dma_cleanup+0x125/0x150 [mt76] _raw_spin_lock+0x2c/0x70 ? mt76_dma_cleanup+0x125/0x150 [mt76] mt76_dma_cleanup+0x125/0x150 [mt76] mt76x2_cleanup+0x5a/0x70 [mt76x2e] mt76x2e_remove+0x18/0x30 [mt76x2e] pci_device_remove+0x36/0xa0 __device_release_driver+0x16c/0x220 driver_detach+0xcf/0x110 bus_remove_driver+0x56/0xca pci_unregister_driver+0x36/0x80 __do_sys_delete_module.constprop.0+0x127/0x200 ? syscall_enter_from_user_mode+0x1d/0x50 ? trace_hardirqs_on+0x1c/0xe0 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7ff0da54e36b Code: 73 01 c3 48 8b 0d 2d 0b 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d fd 0a 0c 00 f7 d8 64 89 01 48 Fixes: dd57a95cfddc ("mt76: move txwi handling code to dma.c, since it is mmio specific") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30mt76: set fops_tx_stats.owner to THIS_MODULETaehee Yoo1-0/+1
[ Upstream commit f9df085ce1be5c599e4df590ff7ba853786c6d95 ] If THIS_MODULE is not set, the module would be removed while debugfs is being used. It eventually makes kernel panic. Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30mt76: mt7915: set fops_sta_stats.owner to THIS_MODULETaehee Yoo1-0/+1
[ Upstream commit 5efbe3b1b8992d5f837388091920945c23212159 ] If THIS_MODULE is not set, the module would be removed while debugfs is being used. It eventually makes kernel panic. Fixes: ec9742a8f38e ("mt76: mt7915: add .sta_add_debugfs support") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30mt76: mt7663s: fix a possible ple quota underflowLorenzo Bianconi1-1/+1
[ Upstream commit 1c79a190e94325e01811f653f770a34e816fdd8f ] Properly account current consumed ple quota in mt7663s_tx_pick_quota routine and avoid possible underflow. Fixes: 6ef2d665f64d ("mt76: mt7663s: split mt7663s_tx_update_sched in mt7663s_tx_{pick,update}_quota") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ath10k: Release some resources in an error handling pathChristophe JAILLET1-1/+4
[ Upstream commit 6364e693f4a7a89a2fb3dd2cbd6cc06d5fd6e26d ] Should an error occur after calling 'ath10k_usb_create()', it should be undone by a corresponding 'ath10k_usb_destroy()' call Fixes: 4db66499df91 ("ath10k: add initial USB support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201122170358.1346065-1-christophe.jaillet@wanadoo.fr Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ath10k: Fix an error handling pathChristophe JAILLET1-0/+2
[ Upstream commit ed3573bc3943c27d2d8e405a242f87ed14572ca1 ] If 'ath10k_usb_create()' fails, we should release some resources and report an error instead of silently continuing. Fixes: 4db66499df91 ("ath10k: add initial USB support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201122170342.1346011-1-christophe.jaillet@wanadoo.fr Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ath10k: Fix the parsing error in service available eventRakesh Pillai3-3/+11
[ Upstream commit c7cee9c0f499f27ec6de06bea664b61320534768 ] The wmi service available event has been extended to contain extra 128 bit for new services to be indicated by firmware. Currently the presence of any optional TLVs in the wmi service available event leads to a parsing error with the below error message: ath10k_snoc 18800000.wifi: failed to parse svc_avail tlv: -71 The wmi service available event parsing should not return error for the newly added optional TLV. Fix this parsing for service available event message. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.2.2-00720-QCAHLSWMTPL-1 Fixes: cea19a6ce8bf ("ath10k: add WMI_SERVICE_AVAILABLE_EVENT support") Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1605501291-23040-1-git-send-email-pillair@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ath11k: Fix an error handling pathChristophe JAILLET1-2/+4
[ Upstream commit e7bcc145bcd035e56da7b97b033c463b32a5ff80 ] If 'kzalloc' fails, we must return an error code. While at it, remove a useless initialization of 'err' which could hide the issue. Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201122173943.1366167-1-christophe.jaillet@wanadoo.fr Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ath11k: Reset ath11k_skb_cb before setting new flagsSven Eckelmann1-0/+1
[ Upstream commit 5da7acfec5ec55aa0b69b8760f1d2116b4e2ad26 ] It was observed that the codepath for the ATH11K_SKB_HW_80211_ENCAP was used even when the IEEE80211_TX_CTRL_HW_80211_ENCAP was not enabled for a an skbuff. This became even more prominent when the QCAs wlan-open patchset for ath11k [1] was applied and a sane looking fix just caused crashes when injecting frames via a monitor interface (for example with ratechecker): [ 86.963152] Unable to handle kernel NULL pointer dereference at virtual address 00000338 [ 86.963192] pgd = ffffffc0008f0000 [ 86.971034] [00000338] *pgd=0000000051706003, *pud=0000000051706003, *pmd=0000000051707003, *pte=00e800000b000707 [ 86.984292] Internal error: Oops: 96000006 [#1] PREEMPT SMP [...] [ 87.713339] [<ffffffbffc802480>] ieee80211_tx_status_8023+0xf8/0x220 [mac80211] [ 87.715654] [<ffffffbffc98bad4>] ath11k_dp_tx_completion_handler+0x42c/0xa10 [ath11k] [ 87.722924] [<ffffffbffc989190>] ath11k_dp_service_srng+0x70/0x3c8 [ath11k] [ 87.730831] [<ffffffbffca03460>] 0xffffffbffca03460 [ 87.737599] [<ffffffc00046ef58>] net_rx_action+0xf8/0x288 [ 87.742462] [<ffffffc000097554>] __do_softirq+0xfc/0x220 [ 87.748014] [<ffffffc000097900>] irq_exit+0x98/0xe8 [ 87.753396] [<ffffffc0000cf188>] __handle_domain_irq+0x90/0xb8 [ 87.757999] [<ffffffc000081ca4>] gic_handle_irq+0x6c/0xc8 [ 87.763899] Exception stack(0xffffffc00081bdc0 to 0xffffffc00081bef0) Problem is that the state of ath11k_skb_cb->flags must be considered unknown and could contain anything when it is not manually initialized. So it could also contain ATH11K_SKB_HW_80211_ENCAP. And this can result in the code to assume that the ath11k_skb_cb->vif is set - even when this is not always the case for non ATH11K_SKB_HW_80211_ENCAP transmissions. Tested-on: IPQ8074 hw2.0 WLAN.HK.2.4.0.1.r1-00026-QCAHKSWPL_SILICONZ-2 [1] https://source.codeaurora.org/quic/qsdk/oss/system/feeds/wlan-open/tree/mac80211/patches?h=NHSS.QSDK.11.4.r3 (162 patches at the moment which are often not upstreamed but essential to get ath11k working) Fixes: e7f33e0c52c0 ("ath11k: add tx hw 802.11 encapsulation offloading support") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201119154235.263250-2-sven@narfation.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ath11k: Don't cast ath11k_skb_cb to ieee80211_tx_info.controlSven Eckelmann3-12/+21
[ Upstream commit f4d291b43f809b74c66b21f5190cd578af43070b ] The driver_data area of ieee80211_tx_info is used in ath11k for ath11k_skb_cb. The first function in the TX patch which rewrites it to ath11k_skb_cb is already ath11k_mac_op_tx. No one else in the code path must use it for something else before it reinitializes it. Otherwise the data has to be considered uninitialized or corrupt. But the ieee80211_tx_info.control shares exactly the same area as ieee80211_tx_info.driver_data and ath11k is still using it. This results in best case in a ath11k c000000.wifi1: no vif found for mgmt frame, flags 0x0 or (slightly worse) in a kernel oops. Instead, the interesting data must be moved first into the ath11k_skb_cb and ieee80211_tx_info.control must then not be used anymore. Tested-on: IPQ8074 hw2.0 WLAN.HK.2.4.0.1.r1-00026-QCAHKSWPL_SILICONZ-2 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201119154235.263250-1-sven@narfation.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30cw1200: fix missing destroy_workqueue() on error in cw1200_init_commonQinglang Miao1-0/+2
[ Upstream commit 7ec8a926188eb8e7a3cbaca43ec44f2d7146d71b ] Add the missing destroy_workqueue() before return from cw1200_init_common in the error handling case. Fixes: a910e4a94f69 ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201119070842.1011-1-miaoqinglang@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30rsi: fix error return code in rsi_reset_card()Zhang Changzhong1-15/+15
[ Upstream commit fb21d14694bd46a538258d86498736490b3ba855 ] Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 17ff2c794f39 ("rsi: reset device changes for 9116") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1605582454-39649-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30qtnfmac: fix error return code in qtnf_pcie_probe()Wang Hai1-3/+3
[ Upstream commit 31e07aa33fa7cdc93fa91c3f78f031e8d38862c2 ] Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: b7da53cd6cd1 ("qtnfmac_pcie: use single PCIe driver for all platforms") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201114123347.29632-1-wanghai38@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30orinoco: Move context allocation after processing the skbSebastian Andrzej Siewior1-7/+7
[ Upstream commit a31eb615646a63370aa1da1053c45439c7653d83 ] ezusb_xmit() allocates a context which is leaked if orinoco_process_xmit_skb() returns an error. Move ezusb_alloc_ctx() after the invocation of orinoco_process_xmit_skb() because the context is not needed so early. ezusb_access_ltv() will cleanup the context in case of an error. Fixes: bac6fafd4d6a0 ("orinoco: refactor xmit path") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201113212252.2243570-2-bigeasy@linutronix.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30brcmfmac: fix error return code in brcmf_cfg80211_connect()Zhang Changzhong1-1/+2
[ Upstream commit 37ff144d29acd7bca3d465ce2fc4cb5c7072a7e5 ] Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 3b1e0a7bdfee ("brcmfmac: add support for SAE authentication offload") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Reviewed-by: Chi-hsien Lin <chi-hsien.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1605248896-16812-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ath11k: Fix the rx_filter flag setting for peer rssi statsMaharaja Kennadyrajan1-1/+2
[ Upstream commit 11af6de4799ee6eeae3730f18fd417414d212e2d ] Set the rx_filter in ath11k_mac_config_mon_status_default(), only when the rx_filter value exists in ath11k_debug_rx_filter(). Without this change, rx_filter gets set to 0 and peer rssi stats aren't updating properly from firmware. Tested-on: IPQ8074 WLAN.HK.2.1.0.1-01230-QCAHKSWPL_SILICONZ-4 Fixes: ec48d28ba291 ("ath11k: Fix rx_filter flags setting for per peer rx_stats") Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1605091117-11005-1-git-send-email-mkenna@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ionic: change set_rx_mode from_ndo to can_sleepShannon Nelson1-10/+10
[ Upstream commit 81dbc24147f9250c186ae5875b3ed3136e9e293b ] Instead of having two different ways of expressing the same sleepability concept, using opposite logic, we can rework the from_ndo to can_sleep for a more consistent usage. Fixes: 1800eee16676 ("net: ionic: Replace in_interrupt() usage.") Signed-off-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ionic: flatten calls to ionic_lif_rx_modeShannon Nelson1-22/+16
[ Upstream commit e94f76bb206333efcd0c02da5dbb142518c941a2 ] The _ionic_lif_rx_mode() is only used once and really doesn't need to be broken out. Signed-off-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ionic: use mc sync for multicast filtersShannon Nelson1-11/+8
[ Upstream commit e0243e1966592859da4c6ffe6d43e1576ec3c457 ] We should be using the multicast sync routines for the multicast filters. Also, let's just flatten the logic a bit and pull the small unicast routine back into ionic_set_rx_mode(). Fixes: 1800eee16676 ("net: ionic: Replace in_interrupt() usage.") Signed-off-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30mwifiex: fix mwifiex_shutdown_sw() causing sw reset failureTsuchiya Yuto1-0/+2
[ Upstream commit fa74cb1dc0f4da46c441b735ca865ac52de42c0e ] When a PCIe function level reset (FLR) is performed but without fw reset for some reasons (e.g., on Microsoft Surface devices, fw reset requires other quirks), it fails to reset wifi properly. You can trigger the issue on such devices via debugfs entry for reset: $ echo 1 | sudo tee /sys/kernel/debug/mwifiex/mlan0/reset and the resulting dmesg log: [ 45.740508] mwifiex_pcie 0000:03:00.0: Resetting per request [ 45.742937] mwifiex_pcie 0000:03:00.0: info: successfully disconnected from [BSSID]: reason code 3 [ 45.744666] mwifiex_pcie 0000:03:00.0: info: shutdown mwifiex... [ 45.751530] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 45.751539] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 45.771691] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 45.771695] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [ 45.771697] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 45.771698] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [ 45.771699] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 45.771701] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [ 45.771702] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 45.771703] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [ 45.771704] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 45.771705] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [ 45.771707] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 45.771708] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [ 53.099343] mwifiex_pcie 0000:03:00.0: info: trying to associate to '[SSID]' bssid [BSSID] [ 53.241870] mwifiex_pcie 0000:03:00.0: info: associated to bssid [BSSID] successfully [ 75.377942] mwifiex_pcie 0000:03:00.0: cmd_wait_q terminated: -110 [ 85.385491] mwifiex_pcie 0000:03:00.0: info: successfully disconnected from [BSSID]: reason code 15 [ 87.539408] mwifiex_pcie 0000:03:00.0: cmd_wait_q terminated: -110 [ 87.539412] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [ 99.699917] mwifiex_pcie 0000:03:00.0: cmd_wait_q terminated: -110 [ 99.699925] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [ 111.859802] mwifiex_pcie 0000:03:00.0: cmd_wait_q terminated: -110 [ 111.859808] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [...] When comparing mwifiex_shutdown_sw() with mwifiex_pcie_remove(), it lacks mwifiex_init_shutdown_fw(). This commit fixes mwifiex_shutdown_sw() by adding the missing mwifiex_init_shutdown_fw(). Fixes: 4c5dae59d2e9 ("mwifiex: add PCIe function level reset support") Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201028142110.18144-2-kitakar@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ath11k: Handle errors if peer creation failsAlex Dewar1-10/+14
[ Upstream commit c134d1f8c436d96b3f62896c630278e3ec001280 ] ath11k_peer_create() is called without its return value being checked, meaning errors will be unhandled. Add missing check and, as the mutex is unconditionally unlocked on leaving this function, simplify the exit path. Addresses-Coverity-ID: 1497531 ("Code maintainability issues") Fixes: 701e48a43e15 ("ath11k: add packet log support for QCA6390") Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201004100218.311653-1-alex.dewar90@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30brcmfmac: Fix memory leak for unpaired brcmf_{alloc/free}Seung-Woo Kim2-2/+5
[ Upstream commit 9db946284e07bb27309dd546b7fee528664ba82a ] There are missig brcmf_free() for brcmf_alloc(). Fix memory leak by adding missed brcmf_free(). Reported-by: Jaehoon Chung <jh80.chung@samsung.com> Fixes: a1f5aac1765a ("brcmfmac: don't realloc wiphy during PCIe reset") Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1603849967-22817-1-git-send-email-sw0312.kim@samsung.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ath11k: fix wmi init configurationKarthikeyan Periyasamy1-2/+2
[ Upstream commit 36c7c640ffeb87168e5ff79b7a36ae3a020bd378 ] Assign the correct hw_op ath11k_init_wmi_config_ipq8074 to the hw IPQ8074. Also update the correct TWT radio count. Incorrect TWT radio count cause TWT feature fails on radio2 because physical device count is hardcoded to 2. so set the value dynamically. Found this during code review. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Fixes: 2d4bcbed5b7d53e1 ("ath11k: initialize wmi config based on hw_params") Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1604512020-25197-1-git-send-email-periyasa@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ath11k: Fix number of rules in filtered ETSI regdomainSven Eckelmann1-2/+3
[ Upstream commit 6189be7d145c3a2d48514eb8755483602ff5a4b4 ] The ath11k code will try to insert wheather rader related limits when the DFS region is set to ETSI. For this reason, it will add two more entries in the array of reg_rules. But the 2.4.0.1 firmware is prefiltering the list of reg rules it returns for 2.4GHz PHYs. They will then not contain the list of 5GHz rules and thus no wheather radar band rules were inserted by this code. But the code didn't fix the n_reg_rules for this regulatory domain and PHY when this happened. This resulted in a rejection by is_valid_rd because it found rules which start and end at 0khz. This resulted in a splat like: Invalid regulatory domain detected ------------[ cut here ]------------ WARNING: at backports-20200628-4.4.60-9a94b73e75/net/wireless/reg.c:3721 [...] ath11k c000000.wifi1: failed to perform regd update : -22 The number of rules must therefore be saved after they were converted from the ath11k format to the ieee80211_regdomain format and not before. Tested with IPQ8074 WLAN.HK.2.4.0.1.r1-00019-QCAHKSWPL_SILICONZ-1 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201030101940.2387952-1-sven@narfation.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ath11k: Initialize complete alpha2 for regulatory changeSven Eckelmann1-0/+1
[ Upstream commit 383a32cde4172db19d4743d4c782c00af39ff275 ] The function ath11k_wmi_send_init_country_cmd is taking 3 byte from alpha2 of the structure wmi_init_country_params. But the function ath11k_reg_notifier is only initializing 2 bytes. The third byte is therefore always an uninitialized value. The command can happen to look like 0c 00 87 02 01 00 00 00 00 00 00 00 43 41 f8 00 instead of 0c 00 87 02 01 00 00 00 00 00 00 00 43 41 00 00 Tested-on: IPQ8074 hw2.0 WLAN.HK.2.1.0.1-01161-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Tested-on: IPQ8074 hw2.0 WLAN.HK.2.4.0.1.r1-00019-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 WLAN.HK.2.4.0.1.r1-00026-QCAHKSWPL_SILICONZ-2 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201021140555.4114715-1-sven@narfation.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller4-14/+11
Alexei Starovoitov says: ==================== pull-request: bpf 2020-12-10 The following pull-request contains BPF updates for your *net* tree. We've added 21 non-merge commits during the last 12 day(s) which contain a total of 21 files changed, 163 insertions(+), 88 deletions(-). The main changes are: 1) Fix propagation of 32-bit signed bounds from 64-bit bounds, from Alexei. 2) Fix ring_buffer__poll() return value, from Andrii. 3) Fix race in lwt_bpf, from Cong. 4) Fix test_offload, from Toke. 5) Various xsk fixes. Please consider pulling these changes from: git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git Thanks a lot! Also thanks to reporters, reviewers and testers of commits in this pull-request: Cong Wang, Hulk Robot, Jakub Kicinski, Jean-Philippe Brucker, John Fastabend, Magnus Karlsson, Maxim Mikityanskiy, Yonghong Song ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-22 01:35:16 +0300