summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2012-02-21bnx2x: update driver version to 1.72.10-0Dmitry Kravkov1-2/+2
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-21bnx2x: add gro_checkDmitry Kravkov4-0/+25
The patch provides workaround for BUG in FW 7.2.16, which in GRO mode may miscalculate buffer and place on SGE one frag less than it could. It may happen only for some MTUs, we mark these MTUs with gro_check flag during device initialization or MTU change. Next FW should include fix for the issue and the patch could be reverted. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-21cnic: update for FW 7.2.xxMichael Chan1-12/+12
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-21use FW 7.2.16Dmitry Kravkov8-82/+177
The patch integrates FW 7.2.16 HSI and implements driver part of GRO flow. FW 7.2.16 adds the ability to aggregate packets for GRO (and not just LRO) and also fixes some bugs. 1. Added new aggregation mode: GRO. In this mode packets are aggregated such that the original packets can be reconstructed by the OS. 2. 57712 HW bug workaround - initialized all CAM TM registers to 0x32. 3. Adding the FCoE statistics structures to the BNX2X HSI. 4. Wrong configuration of TX HW input buffer size may cause theoretical performance effect. Performed configuration fix. 5. FCOE - Arrival of packets beyond task IO size can lead to crash. Fix firmware data-in flow. 6. iSCSI - In rare cases of on-chip termination the graceful termination timer hangs, and the termination doesn't complete. Firmware fix to MSL timer tolerance. 7. iSCSI - Chip hangs when target sends FIN out-of-order or with isles open at the initiator side. Firmware implementation corrected to drop FIN received out-of-order or with isles still open. 8. iSCSI - Chip hangs when in case of retransmission not aligned to 4-bytes from the beginning of iSCSI PDU. Firmware implementation corrected to support arbitrary aligned retransmissions. 9. iSCSI - Arrival of target-initiated NOP-IN during intense ISCSI traffic might lead to crash. Firmware fix to relevant flow. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-20enic: Add support for fw init command on sriov vf'sRoopa Prabhu2-2/+2
This patch fixes enic_probe to do a fw init devcmd for sriov vfs. This enables vf driver in the guest to get into adapter init state without having to explicitly issue an init fw cmd with portprofile info. But a successful init on the vf will require the port profile information to be pre-provisioned by the hypervisor via the pf Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Sujith Sankar <ssujith@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-20enic: Fix ndo_set_vf_mac and ndo_set_vf_port to set/get the sriov vf's macRoopa Prabhu2-9/+30
This patch fixes the ndo_set_vf_mac netdev op to set the sriov vf mac in adapter using the new fw devcmd CMD_SET_MAC_ADDR. During port profile associate the pf driver gets the vf mac using CMD_GET_MAC_ADDR. Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Sujith Sankar <ssujith@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-20enic: Add new fw devcmd to set mac address of an interfaceRoopa Prabhu4-1/+23
This patch adds a new devcmd CMD_SET_MAC_ADDR to set the mac address of an interface. Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Sujith Sankar <ssujith@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-20enic: rename CMD_MAC_ADDR to CMD_GET_MAC_ADDRRoopa Prabhu4-6/+6
firmware devcmd CMD_MAC_ADDR gets the mac address of a vnic from adapter. This patch renames it to CMD_GET_MAC_ADDR more appropriately. Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Sujith Sankar <ssujith@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-20ll_temac: Fix build.David S. Miller1-1/+1
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-20adi: adapt to eth_hw_addr_random() and changes in arch/blackfinDanny Kukawka2-7/+10
Adapt adi ethernet driver to changes in bfin_get_ether_addr() from arch/blackfin. bfin_get_ether_addr() returns now a state. Set a random mac address via new eth_hw_addr_random() in case the return value is not 0. Reset the state to NET_ADDR_PERM as soon as the MAC get changed via .ndo_set_mac_address. v2: change the logic to reduce unneeded checks Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-20ethernet: Fix typo in lantiq_etop.cMasanari Iida1-1/+1
Correct spelling "platfom" to "platform" in drivers/net/ethernet/lantiq_etop.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-20bnx2x: make bnx2x_close() static againMichal Schmidt2-3/+3
Commit 8304859a "bnx2x: add fan failure event handling" made the function bnx2x_close() non-static unnecessarily. The function is not called from other sources. Make it static again. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller22-160/+163
Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c Small minor conflict in bnx2x, wherein one commit changed how statistics were stored in software, and another commit fixed endianness bugs wrt. reading the values provided by the chip in memory. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-18cisco/enic: use eth_hw_addr_random() instead of random_ether_addr()Danny Kukawka1-1/+2
Use dev_hw_addr_random() instead of calling random_ether_addr() to set addr_assign_type correctly to NET_ADDR_RANDOM. Reset the state to NET_ADDR_PERM as soon as the MAC get changed via .ndo_set_mac_address. v3: adapt to net-next v2: use bitops, adapt to eth_hw_addr_random(), add a comment Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-18net: ethernet: xilinx: Convert xilinx_axienet to module_platform_driverTobias Klauser1-12/+1
Follow commit db62f684. Convert the driver to use the module_platform_driver() macro which makes the code a bit smaller and simpler. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-18atheros eth: set addr_assign_type if random_ether_addr() usedDanny Kukawka4-9/+15
Set addr_assign_type correctly to NET_ADDR_RANDOM in case a random MAC address was generated and assigned to the netdevice. Fix error handling in atl1c_probe(). If atl1c_read_mac_addr() couldn't get the hw mac address, and a random mac address get set return the error code. Don't go to err_eeprom in atl1c_probe(), use the generated MAC address in this case. Reset the state to NET_ADDR_PERM as soon as the MAC get changed via .ndo_set_mac_address. v2: use bitops Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-18ethoc: set addr_assign_type if random_ether_addr() usedDanny Kukawka1-2/+18
Set addr_assign_type correctly to NET_ADDR_RANDOM in case a random MAC address was generated and assigned to the netdevice. Fixed ethoc_set_mac_address() to check if the given mac address is valid and set also dev_addr of the net_device. Check also the return value of ethoc_set_mac_address() in ethoc_probe(). Reset the state to NET_ADDR_PERM as soon as the MAC get changed via .ndo_set_mac_address. v2: set net_device->dev_addr in ethoc_set_mac_address(), check if given address is valid Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
2012-02-18igbvf: reset netdevice addr_assign_type if changedDanny Kukawka1-0/+1
Reset the state of addr_assign_type to NET_ADDR_PERM as soon as the MAC get changed via .ndo_set_mac_address. v2: use bitops to reset addr_assign_type Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-18xilinx ll_temac: use eth_hw_addr_random() instead of random_ether_addr()Danny Kukawka1-1/+3
Use eth_hw_addr_random() instead of calling random_ether_addr() to set addr_assign_type correctly to NET_ADDR_RANDOM. Reset the state to NET_ADDR_PERM as soon as the MAC get changed via .ndo_set_mac_address. v2: reworked to prevent using an extra variable Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-18davinci_emac: use eth_hw_addr_random() instead of random_ether_addr()Danny Kukawka1-2/+3
Use eth_hw_addr_random() instead of calling random_ether_addr() to set addr_assign_type correctly to NET_ADDR_RANDOM. Reset the state to NET_ADDR_PERM as soon as the MAC get changed via .ndo_set_mac_address. Remove one memcpy from emac_dev_setmac_addr() since this is a duplicate: it's already done some lines above. v2: use bitops, adapt to eth_hw_addr_random, remove a memcpy Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-18lantiq_etop: set addr_assign_type if random_ether_addr() usedDanny Kukawka1-0/+7
Set addr_assign_type correctly to NET_ADDR_RANDOM in case a random MAC address was generated and assigned to the netdevice. v2: added comment, renamed bool variable to random_mac Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-18au1000_eth: use eth_hw_addr_random() instead of random_ether_addr()Danny Kukawka1-4/+5
Use eth_hw_addr_random() instead of calling random_ether_addr() to set addr_assign_type correctly to NET_ADDR_RANDOM. v2: adapt to eth_hw_addr_random() Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-17net: sh_eth: add support for VLAN tag filteringYoshihiro Shimoda2-0/+64
Some controllers have TSU. It can register one VLAN tag, and it can filter other VLAN tag by hardware. If vlan_rx_add_vid() is called twice or more, the driver will disable the filtering. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-17net: sh_eth: add support for multicast filteringYoshihiro Shimoda2-5/+286
Some controllers have TSU. It can filter multicast by hardware. This patch supports it. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-17net: sh_eth: modify a condition of ioremap for TSUYoshihiro Shimoda1-11/+14
If the controller has TSU, the each channel needs TSU registers. This patch also fixes the iounmap condition in the sh_eth_drv_remove(). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-17net: sh_eth: change the condition of initializationYoshihiro Shimoda1-2/+2
The SH7757 has 2 Fast Ethernet and 2 Gigabit Ethernet, and the first Gigabit channel needs the initialization. So, this patch adds the parameter of "needs_init", and if the sh_eth_plat_data is set it to 1, the driver will initialize the channel. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-17net: sh_eth: add the value of tsu to the SH7757's GETHERYoshihiro Shimoda1-0/+1
The SH7757's GETHER has TSU registers. So, this patch adds the value of ".tsu = 1" in the sh_eth_cpu_data. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-nextDavid S. Miller21-604/+3170
2012-02-16sfc: Add SR-IOV back-end support for SFC9000 familyBen Hutchings13-26/+2192
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs), each with an RX queue, a TX queue, an event queue and a mailbox register. These may be assigned to up to 127 SR-IOV virtual functions per port, with up to 64 VIs per VF. We allocate an extra channel (IRQ and event queue only) to receive requests from VF drivers. There is a per-port limit of 4 concurrent RX queue flushes, and queue flushes may be initiated by the MC in response to a Function Level Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all flush requests via the MC. The RSS indirection table is shared with VFs, so the number of RX queues used in the PF is limited to the number of VIs per VF. This is almost entirely the work of Steve Hodgson, formerly shodgson@solarflare.com. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16sfc: Allocate SRAM between buffer table and descriptor caches at init timeBen Hutchings6-14/+50
Each port has a block of 64-bit SRAM that is divided between buffer table and descriptor cache regions at initialisation time. Currently we use a fixed allocation, but it needs to be changed to support larger numbers of queues. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16sfc: Pass NIC structure into efx_wanted_parallelism()Ben Hutchings1-4/+4
This lets us identify the NIC affected in case of failure, and will be necessary to adjust for SR-IOV constraints. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16sfc: Add support for 'extra' channel typesBen Hutchings3-108/+239
Abstract some of the channel operations to allow for 'extra' channels that do not have RX or TX queues. - Try to assign a channel to each extra channel type that is enabled for the NIC, but gracefully degrade if we can't allocate sufficient MSI-X vectors - Allow each extra channel type to generate its own channel name - Allow channel types to disable reallocation and reinitialisation of their channels Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16sfc: Make all CPU/IRQ/channel/queue counts unsignedBen Hutchings2-9/+11
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16sfc: Make buffer table indices and counts consistently unsignedBen Hutchings2-3/+3
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16sfc: Disable flow control during flushesSteve Hodgson3-0/+9
The TX DMA engine issues upstream read requests when there is room in the TX FIFO for the completion. However, the fetches for the rest of the packet might be delayed by any back pressure. Since a flush must wait for an EOP, the entire flush may be delayed by back pressure. Mitigate this by disabling flow control before the flushes are started. Since PF and VF flushes run in parallel introduce fc_disable, a reference count of the number of flushes outstanding. The same principle could be applied to Falcon, but that would bring with it its own testing. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16sfc: Generalise event generation to cover VF-owned event queuesBen Hutchings2-6/+7
For SR-IOV we will need to send events to event queues that belong to VFs serviced by other drivers. Change the parameters of efx_generate_event() to allow this and declare it extern. While we're at it, remove the existing declaration under the wrong name efx_nic_generate_event(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16sfc: Use proper function to test for RX channel in efx_poll()Ben Hutchings1-1/+1
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16sfc: Leave interrupts and event queues enabled whenever we canBen Hutchings4-318/+308
When SR-IOV is enabled we may receive FLR (Function-Level Reset) events, associated queue flush events and requests from VF drivers at any time. Therefore we need to keep event queues and interrupts enabled whenever possible. Currently we stop interrupt-driven event processing before flushing RX and TX queues; efx_nic_flush_queues() then polls event queues for flush events and discards any others it finds. Change it to work with the regular event handling functions. Currently efx_start_channel() fills RX queues synchronously when a device is brought up. This could now race with NAPI, so change it to send fill events. This was almost entirely written by Steve Hodgson, formerly shodgson@solarflare.com. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16sfc: Generate RX fill events based on RX queues, not channelsBen Hutchings3-9/+13
This makes it harder to accidentally send such events to TX-only channels. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16sfc: Generalise driver event generationBen Hutchings1-24/+27
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16sfc: Correct MAC filter bitfield definitionsBen Hutchings1-10/+10
The RMFT_DEST_MAC and TMFT_SRC_MAC register fields were previously documented as 44 bits wide, whereas a MAC address has 48 bits. Thankfully the hardware uses the correct width and the driver has used separate definitions that divide each of these into 32-bit and 16-bit fields. Fix the initial definitions for these fields and rewrite the latter definitions to use them. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16sfc: Add support for TX MAC filtersBen Hutchings2-5/+72
On Siena each TX queue can be configured to send only packets for which there is a TX MAC filter that matches the source MAC address, queue ID, and optionally VID. This will be used to implement the 'spoofchk' feature for SR-IOV virtual functions. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16sfc: Add support for configuring RX unicast/multicast default filtersBen Hutchings3-47/+214
On Siena all received packets that don't match a more specific filter will match the unicast or multicast default filter. Currently we leave these set to the default values (RSS with base queue number of 0). Allow them to be reconfigured to select a single RX queue. These default filters are programmed through the FILTER_CTL register, but we represent them internally as an additional table of size 2. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16cxgb3: update firmware versionDivy Le Ray1-2/+2
Hi Dave, This patch is sent in conjunction with the cxgb3 firmware update submission on linux-firmware. (https://lkml.org/lkml/2012/2/13/27) Cheers, Divy From: Divy Le Ray <divy@chelsio.com> This patch updates the firmware version cxgb3 is requesting to 7.12.0. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-16net/ethernet: ks8851_mll fix irq handlingJan Weitzel1-8/+6
There a two different irq variables ks->irq and netdev->irq. Only ks->irq is set on probe, so disabling irq in ks_start_xmit fails. This patches remove ks->irq from private data and use only netdev->irq. Tested on a kernel 3.0 based OMAP4430 SMP Board Signed-off-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-16renesas/sh_eth.c: fix linux/interrupt.h included twiceDanny Kukawka1-1/+0
Remove double include of linux/interrupt.h. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-16net: use eth_hw_addr_random() and reset addr_assign_typeDanny Kukawka14-12/+25
Use eth_hw_addr_random() instead of calling random_ether_addr() to set addr_assign_type correctly to NET_ADDR_RANDOM. Reset the state to NET_ADDR_PERM as soon as the MAC get changed via .ndo_set_mac_address. v2: adapt to renamed eth_hw_addr_random() Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-16net: replace random_ether_addr() with eth_hw_addr_random()Danny Kukawka22-25/+24
Replace usage of random_ether_addr() with eth_hw_addr_random() to set addr_assign_type correctly to NET_ADDR_RANDOM. Change the trivial cases. v2: adapt to renamed eth_hw_addr_random() Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-16bnx2x: allow all functions to display the phy FW versionMintz Yuval3-12/+6
The phy FW version is stored in regular memory, no MDC-MDIO access or any special locks are required to read it in the current implementation. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-16bnx2x: removed code re-checking memory base after device openMintz Yuval1-11/+0
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-31 22:59:16 +0300