summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2019-05-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds748-13523/+91169
Pull networking updates from David Miller: "Highlights: 1) Support AES128-CCM ciphers in kTLS, from Vakul Garg. 2) Add fib_sync_mem to control the amount of dirty memory we allow to queue up between synchronize RCU calls, from David Ahern. 3) Make flow classifier more lockless, from Vlad Buslov. 4) Add PHY downshift support to aquantia driver, from Heiner Kallweit. 5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces contention on SLAB spinlocks in heavy RPC workloads. 6) Partial GSO offload support in XFRM, from Boris Pismenny. 7) Add fast link down support to ethtool, from Heiner Kallweit. 8) Use siphash for IP ID generator, from Eric Dumazet. 9) Pull nexthops even further out from ipv4/ipv6 routes and FIB entries, from David Ahern. 10) Move skb->xmit_more into a per-cpu variable, from Florian Westphal. 11) Improve eBPF verifier speed and increase maximum program size, from Alexei Starovoitov. 12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit spinlocks. From Neil Brown. 13) Allow tunneling with GUE encap in ipvs, from Jacky Hu. 14) Improve link partner cap detection in generic PHY code, from Heiner Kallweit. 15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan Maguire. 16) Remove SKB list implementation assumptions in SCTP, your's truly. 17) Various cleanups, optimizations, and simplifications in r8169 driver. From Heiner Kallweit. 18) Add memory accounting on TX and RX path of SCTP, from Xin Long. 19) Switch PHY drivers over to use dynamic featue detection, from Heiner Kallweit. 20) Support flow steering without masking in dpaa2-eth, from Ioana Ciocoi. 21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri Pirko. 22) Increase the strict parsing of current and future netlink attributes, also export such policies to userspace. From Johannes Berg. 23) Allow DSA tag drivers to be modular, from Andrew Lunn. 24) Remove legacy DSA probing support, also from Andrew Lunn. 25) Allow ll_temac driver to be used on non-x86 platforms, from Esben Haabendal. 26) Add a generic tracepoint for TX queue timeouts to ease debugging, from Cong Wang. 27) More indirect call optimizations, from Paolo Abeni" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits) cxgb4: Fix error path in cxgb4_init_module net: phy: improve pause mode reporting in phy_print_status dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings net: macb: Change interrupt and napi enable order in open net: ll_temac: Improve error message on error IRQ net/sched: remove block pointer from common offload structure net: ethernet: support of_get_mac_address new ERR_PTR error net: usb: smsc: fix warning reported by kbuild test robot staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check net: dsa: support of_get_mac_address new ERR_PTR error net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats vrf: sit mtu should not be updated when vrf netdev is the link net: dsa: Fix error cleanup path in dsa_init_module l2tp: Fix possible NULL pointer dereference taprio: add null check on sched_nest to avoid potential null pointer dereference net: mvpp2: cls: fix less than zero check on a u32 variable net_sched: sch_fq: handle non connected flows net_sched: sch_fq: do not assume EDT packets are ordered net: hns3: use devm_kcalloc when allocating desc_cb net: hns3: some cleanup for struct hns3_enet_ring ...
2019-05-08Merge branch 'parisc-5.2-1' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: "Many great new features, fixes and optimizations, including: - Convert page table updates to use per-pagetable spinlocks which overall improves performance on SMP machines a lot, by Mikulas Patocka - Kernel debugger (KGDB) support, by Sven Schnelle - KPROBES support, by Sven Schnelle - Lots of TLB lock/flush improvements, by Dave Anglin - Drop DISCONTIGMEM and switch to SPARSEMEM - Added JUMP_LABEL, branch runtime-patching support - Lots of other small speedups and cleanups, e.g. for QEMU, stack randomization, avoidance of name clashes, documentation updates, etc ..." * 'parisc-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: (28 commits) parisc: Add static branch and JUMP_LABEL feature parisc: Use PA_ASM_LEVEL in boot code parisc: Rename LEVEL to PA_ASM_LEVEL to avoid name clash with DRBD code parisc: Update huge TLB page support to use per-pagetable spinlock parisc: Use per-pagetable spinlock parisc: Allow live-patching of __meminit functions parisc: Add memory barrier to asm pdc and sync instructions parisc: Add memory clobber to TLB purges parisc: Use ldcw instruction for SMP spinlock release barrier parisc: Remove lock code to serialize TLB operations in pacache.S parisc: Switch from DISCONTIGMEM to SPARSEMEM parisc: enable wide mode early parisc: update feature lists parisc: Show n/a if product number not available parisc: remove unused flags parameter in __patch_text() doc: update kprobes supported architecture list parisc: Implement kretprobes parisc: remove kprobes.h from generic-y parisc: Implement kprobes parisc: add functions required by KPROBE_EVENTS ...
2019-05-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller9-38/+62
Minor conflict with the DSA legacy code removal. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07Merge tag 'char-misc-5.2-rc1-part2' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc update part 2 from Greg KH: "Here is the "real" big set of char/misc driver patches for 5.2-rc1 Loads of different driver subsystem stuff in here, all over the places: - thunderbolt driver updates - habanalabs driver updates - nvmem driver updates - extcon driver updates - intel_th driver updates - mei driver updates - coresight driver updates - soundwire driver cleanups and updates - fastrpc driver updates - other minor driver updates - chardev minor fixups Feels like this tree is getting to be a dumping ground of "small driver subsystems" these days. Which is fine with me, if it makes things easier for those subsystem maintainers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.2-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) intel_th: msu: Add current window tracking intel_th: msu: Add a sysfs attribute to trigger window switch intel_th: msu: Correct the block wrap detection intel_th: Add switch triggering support intel_th: gth: Factor out trace start/stop intel_th: msu: Factor out pipeline draining intel_th: msu: Switch over to scatterlist intel_th: msu: Replace open-coded list_{first,last,next}_entry variants intel_th: Only report useful IRQs to subdevices intel_th: msu: Start handling IRQs intel_th: pci: Use MSI interrupt signalling intel_th: Communicate IRQ via resource intel_th: Add "rtit" source device intel_th: Skip subdevices if their MMIO is missing intel_th: Rework resource passing between glue layers and core intel_th: SPDX-ify the documentation intel_th: msu: Fix single mode with IOMMU coresight: funnel: Support static funnel dt-bindings: arm: coresight: Unify funnel DT binding coresight: replicator: Add new device id for static replicator ...
2019-05-07cxgb4: Fix error path in cxgb4_init_moduleYueHaibing1-3/+12
BUG: unable to handle kernel paging request at ffffffffa016a270 PGD 3270067 P4D 3270067 PUD 3271063 PMD 230bbd067 PTE 0 Oops: 0000 [#1 CPU: 0 PID: 6134 Comm: modprobe Not tainted 5.1.0+ #33 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:atomic_notifier_chain_register+0x24/0x60 Code: 1f 80 00 00 00 00 55 48 89 e5 41 54 49 89 f4 53 48 89 fb e8 ae b4 38 01 48 8b 53 38 48 8d 4b 38 48 85 d2 74 20 45 8b 44 24 10 <44> 3b 42 10 7e 08 eb 13 44 39 42 10 7c 0d 48 8d 4a 08 48 8b 52 08 RSP: 0018:ffffc90000e2bc60 EFLAGS: 00010086 RAX: 0000000000000292 RBX: ffffffff83467240 RCX: ffffffff83467278 RDX: ffffffffa016a260 RSI: ffffffff83752140 RDI: ffffffff83467240 RBP: ffffc90000e2bc70 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 00000000014fa61f R12: ffffffffa01c8260 R13: ffff888231091e00 R14: 0000000000000000 R15: ffffc90000e2be78 FS: 00007fbd8d7cd540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa016a270 CR3: 000000022c7e3000 CR4: 00000000000006f0 Call Trace: register_inet6addr_notifier+0x13/0x20 cxgb4_init_module+0x6c/0x1000 [cxgb4 ? 0xffffffffa01d7000 do_one_initcall+0x6c/0x3cc ? do_init_module+0x22/0x1f1 ? rcu_read_lock_sched_held+0x97/0xb0 ? kmem_cache_alloc_trace+0x325/0x3b0 do_init_module+0x5b/0x1f1 load_module+0x1db1/0x2690 ? m_show+0x1d0/0x1d0 __do_sys_finit_module+0xc5/0xd0 __x64_sys_finit_module+0x15/0x20 do_syscall_64+0x6b/0x1d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe If pci_register_driver fails, register inet6addr_notifier is pointless. This patch fix the error path in cxgb4_init_module. Fixes: b5a02f503caa ("cxgb4 : Update ipv6 address handling api") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: phy: improve pause mode reporting in phy_print_statusHeiner Kallweit1-1/+27
So far we report symmetric pause only, and we don't consider the local pause capabilities. Let's properly consider local and remote capabilities, and report also asymmetric pause. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: macb: Change interrupt and napi enable order in openHarini Katakam1-3/+3
Current order in open: -> Enable interrupts (macb_init_hw) -> Enable NAPI -> Start PHY Sequence of RX handling: -> RX interrupt occurs -> Interrupt is cleared and interrupt bits disabled in handler -> NAPI is scheduled -> In NAPI, RX budget is processed and RX interrupts are re-enabled With the above, on QEMU or fixed link setups (where PHY state doesn't matter), there's a chance macb RX interrupt occurs before NAPI is enabled. This will result in NAPI being scheduled before it is enabled. Fix this macb open by changing the order. Fixes: ae1f2a56d273 ("net: macb: Added support for many RX queues") Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: ll_temac: Improve error message on error IRQEsben Haabendal1-2/+8
The channel status register value can be very helpful when debugging SDMA problems. Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net/sched: remove block pointer from common offload structurePieter Jansen van Vuuren3-2/+8
Based on feedback from Jiri avoid carrying a pointer to the tcf_block structure in the tc_cls_common_offload structure. Instead store a flag in driver private data which indicates if offloads apply to a shared block at block binding time. Suggested-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: ethernet: support of_get_mac_address new ERR_PTR errorPetr Štetiar44-44/+44
There was NVMEM support added to of_get_mac_address, so it could now return ERR_PTR encoded error values, so we need to adjust all current users of of_get_mac_address to this new fact. While at it, remove superfluous is_valid_ether_addr as the MAC address returned from of_get_mac_address is always valid and checked by is_valid_ether_addr anyway. Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: usb: smsc: fix warning reported by kbuild test robotPetr Štetiar2-2/+2
This patch fixes following warning reported by kbuild test robot: In function ‘memcpy’, inlined from ‘smsc75xx_init_mac_address’ at drivers/net/usb/smsc75xx.c:778:3, inlined from ‘smsc75xx_bind’ at drivers/net/usb/smsc75xx.c:1501:2: ./include/linux/string.h:355:9: warning: argument 2 null where non-null expected [-Wnonnull] return __builtin_memcpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/usb/smsc75xx.c: In function ‘smsc75xx_bind’: ./include/linux/string.h:355:9: note: in a call to built-in function ‘__builtin_memcpy’ I've replaced the offending memcpy with ether_addr_copy, because I'm 100% sure, that of_get_mac_address can't return NULL as it returns valid pointer or ERR_PTR encoded value, nothing else. I'm hesitant to just change IS_ERR into IS_ERR_OR_NULL check, as this would make the warning disappear also, but it would be confusing to check for impossible return value just to make a compiler happy. Fixes: adfb3cb2c52e ("net: usb: support of_get_mac_address new ERR_PTR error") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> Reviewed-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_statsNathan Chancellor1-1/+3
Clang warns: drivers/net/dsa/sja1105/sja1105_ethtool.c:316:39: warning: suggest braces around initialization of subobject [-Wmissing-braces] struct sja1105_port_status status = {0}; ^ {} 1 warning generated. One way to fix these warnings is to add additional braces like Clang suggests; however, there has been a bit of push back from some maintainers[1][2], who just prefer memset as it is unambiguous, doesn't depend on a particular compiler version[3], and properly initializes all subobjects. Do that here so there are no more warnings. [1]: https://lore.kernel.org/lkml/022e41c0-8465-dc7a-a45c-64187ecd9684@amd.com/ [2]: https://lore.kernel.org/lkml/20181128.215241.702406654469517539.davem@davemloft.net/ [3]: https://lore.kernel.org/lkml/20181116150432.2408a075@redhat.com/ Fixes: 52c34e6e125c ("net: dsa: sja1105: Add support for ethtool port counters") Link: https://github.com/ClangBuiltLinux/linux/issues/471 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: mvpp2: cls: fix less than zero check on a u32 variableColin Ian King1-2/+4
The signed return from the call to mvpp2_cls_c2_port_flow_index is being assigned to the u32 variable c2.index and then checked for a negative error condition which is always going to be false. Fix this by assigning the return to the int variable index and checking this instead. Addresses-Coverity: ("Unsigned compared against 0") Fixes: 90b509b39ac9 ("net: mvpp2: cls: Add Classification offload support") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: hns3: use devm_kcalloc when allocating desc_cbYunsheng Lin1-4/+4
This patch uses devm_kcalloc instead of kcalloc when allocating ring->desc_cb, because devm_kcalloc not only ensure to free the memory when the dev is deallocted, but also allocate the memory from it's device memory node. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: hns3: some cleanup for struct hns3_enet_ringYunsheng Lin2-9/+2
This patch removes some unused field in struct hns3_enet_ring, use ring->dev for ring_to_dev macro, and use dev consistently in hns3_fill_desc. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: hns3: unify the page reusing for page size 4K and 64KYunsheng Lin1-32/+13
When page size is 64K, RX buffer is currently not reused when the page_offset is moved to last buffer. This patch adds checking to decide whether the buffer page can be reused when last_offset is moved beyond last offset. If the driver is the only user of page when page_offset is moved to beyond last offset, then buffer can be reused and page_offset is set to zero. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: hns3: optimize the barrier using when cleaning TX BDYunsheng Lin1-14/+15
Currently, a barrier is used when cleaning each TX BD, which may cause performance degradation. This patch optimizes it to use one barrier when cleaning TX BD each round. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: hns3: fix error handling for desc fillingYunsheng Lin1-11/+7
When desc filling fails in hns3_nic_net_xmit, it will call hns3_clear_desc to unmap the dma mapping. But currently the ring->next_to_use points to the desc where the desc filling or dma mapping return error, which means the desc that ring->next_to_use points to has not done the dma mapping, the desc that need unmapping is before the ring->next_to_use. This patch fixes it by calling ring_ptr_move_bw(next_to_use) before doing unmapping operation, and set desc_cb->dma to zero to avoid freeing it again when unloading. Also, when filling skb head or frag fails, both need to unmap all the way back to next_to_use_head, so remove one desc filling error handling. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: hns3: combine len and checksum handling for inner and outer header.Yunsheng Lin1-111/+81
When filling len and checksum info to description, there is some similar checking or calculation. So this patch adds hns3_set_l2l3l4 to fill the inner(/normal) header's len and checksum info. If it is a encapsulation skb, it calls hns3_set_outer_l2l3l4 to handle the outer header's len and checksum info, in order to avoid some similar checking or calculation. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: hns3: refactor BD filling for l2l3l4 infoYunsheng Lin1-39/+23
This patch separates the inner and outer l2l3l4 len handling in hns3_set_l2l3l4_len, this is a preparation to combine the l2l3l4 len and checksum handling for inner and outer header. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: hns3: fix for tunnel type handling in hns3_rx_checksumYunsheng Lin1-6/+8
According to hardware user manual, the tunnel packet type is available in the rx.ol_info field of struct hns3_desc. Currently the tunnel packet type is decided by the rx.l234_info, which may cause RX checksum handling error. This patch fixes it by using the correct field in struct hns3_desc to decide the tunnel packet type. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: hns3: add linearizing checking for TSO caseYunsheng Lin1-0/+45
HW requires every continuous 8 buffer data to be larger than MSS, we simplify it by ensuring skb_headlen + the first continuous 7 frags to to be larger than GSO header len + mss, and the remaining continuous 7 frags to be larger than MSS except the last 7 frags. This patch adds hns3_skb_need_linearized to handle it for TSO case. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: hns3: add counter for times RX pages gets allocatedYunsheng Lin3-0/+6
Currently, using "ethtool --statistics" can show how many time RX page have been reused, but there is no counter for RX page not being reused. This patch adds non_reuse_pg counter to better debug the performance issue, because it is hard to determine when the RX page is reused or not if there is no such counter. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: hns3: use napi_schedule_irqoff in hard interrupts handlersYunsheng Lin1-1/+1
napi_schedule_irqoff is introduced to be used from hard interrupts handlers or when irqs are already masked, see: https://lists.openwall.net/netdev/2014/10/29/2 So this patch replaces napi_schedule with napi_schedule_irqoff. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: hns3: unify maybe_stop_tx for TSO and non-TSO caseYunsheng Lin3-86/+50
Currently, maybe_stop_tx ops for TSO and non-TSO case share some BD calculation code, so this patch unifies the maybe_stop_tx by removing the maybe_stop_tx ops. skb_is_gso() can be used to differentiate the case between TSO and non-TSO case if there is need to handle special case for TSO case. This patch also add tx_copy field in "ethtool --statistics" to help better debug the performance issue caused by calling skb_copy. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: dsa: lantiq: Add Forwarding Database accessHauke Mehrtens1-0/+98
This adds functions to add and remove static entries to and from the forwarding database and dump the full forwarding database. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: dsa: lantiq: Add fast age functionHauke Mehrtens1-0/+40
Fast aging per port is not supported directly by the hardware, it is only possible to configure a global aging time. Do the fast aging by iterating over the MAC forwarding table and remove all dynamic entries for a given port. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: dsa: lantiq: Add VLAN aware bridge offloadingHauke Mehrtens1-4/+197
The VLAN aware bridge offloading is similar to the VLAN unaware offloading, this makes it possible to offload the VLAN bridge functionalities. The hardware supports up to 64 VLAN bridge entries, we already use one entry for each LAN port to prevent forwarding of packets between the ports when the ports are not in a bridge, so in the end we have 57 possible VLANs. The VLAN filtering is currently only active when the ports are in a bridge, VLAN filtering for ports not in a bridge is not implemented. It is currently not possible to change between VLAN filtering and not filtering while the port is already in a bridge, this would make the driver more complicated. The VLANs are only defined on bridge entries, so we will not add anything into the hardware when the port joins a bridge if it is doing VLAN filtering, but only when an allowed VLAN is added. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: dsa: lantiq: Add VLAN unaware bridge offloadingHauke Mehrtens1-7/+468
This allows to offload bridges with DSA to the switch hardware and do the packet forwarding in hardware. This implements generic functions to access the switch hardware tables, which are used to control many features of the switch. This patch activates the MAC learning by removing the MAC address table lock, to prevent uncontrolled forwarding of packets between all the LAN ports, they are added into individual bridge tables entries with individual flow ids and the switch will do the MAC learning for each port separately before they are added to a real bridge. Each bridge consist of an entry in the active VLAN table and the VLAN mapping table, table entries with the same index are matching. In the VLAN unaware mode we configure everything with VLAN ID 0, but we use different flow IDs, the switch should handle all VLANs as normal payload and ignore them. When the hardware looks for the port of the destination MAC address it only takes the entries which have the same flow ID of the ingress packet. The bridges are configured with 64 possible entries with these information: Table Index, 0...63 VLAN ID, 0...4095: VLAN ID 0 is untagged flow ID, 0..63: Same flow IDs share entries in MAC learning table port map, one bit for each port number tagged port map, one bit for each port number Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: dsa: lantiq: Allow special tags only on CPU portHauke Mehrtens1-2/+4
Allow the special tag in ingress only on the CPU port and not on all ports. A packet with a special tag could circumvent the hardware forwarding and should only be allowed on the CPU port where Linux controls the port. Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200)" Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07Merge branch 'linus' of ↵Linus Torvalds2-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto update from Herbert Xu: "API: - Add support for AEAD in simd - Add fuzz testing to testmgr - Add panic_on_fail module parameter to testmgr - Use per-CPU struct instead multiple variables in scompress - Change verify API for akcipher Algorithms: - Convert x86 AEAD algorithms over to simd - Forbid 2-key 3DES in FIPS mode - Add EC-RDSA (GOST 34.10) algorithm Drivers: - Set output IV with ctr-aes in crypto4xx - Set output IV in rockchip - Fix potential length overflow with hashing in sun4i-ss - Fix computation error with ctr in vmx - Add SM4 protected keys support in ccree - Remove long-broken mxc-scc driver - Add rfc4106(gcm(aes)) cipher support in cavium/nitrox" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (179 commits) crypto: ccree - use a proper le32 type for le32 val crypto: ccree - remove set but not used variable 'du_size' crypto: ccree - Make cc_sec_disable static crypto: ccree - fix spelling mistake "protedcted" -> "protected" crypto: caam/qi2 - generate hash keys in-place crypto: caam/qi2 - fix DMA mapping of stack memory crypto: caam/qi2 - fix zero-length buffer DMA mapping crypto: stm32/cryp - update to return iv_out crypto: stm32/cryp - remove request mutex protection crypto: stm32/cryp - add weak key check for DES crypto: atmel - remove set but not used variable 'alg_name' crypto: picoxcell - Use dev_get_drvdata() crypto: crypto4xx - get rid of redundant using_sd variable crypto: crypto4xx - use sync skcipher for fallback crypto: crypto4xx - fix cfb and ofb "overran dst buffer" issues crypto: crypto4xx - fix ctr-aes missing output IV crypto: ecrdsa - select ASN1 and OID_REGISTRY for EC-RDSA crypto: ux500 - use ccflags-y instead of CFLAGS_<basename>.o crypto: ccree - handle tee fips error during power management resume crypto: ccree - add function to handle cryptocell tee fips error ...
2019-05-07Merge tag 'arm64-mmiowb' of ↵Linus Torvalds66-310/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull mmiowb removal from Will Deacon: "Remove Mysterious Macro Intended to Obscure Weird Behaviours (mmiowb()) Remove mmiowb() from the kernel memory barrier API and instead, for architectures that need it, hide the barrier inside spin_unlock() when MMIO has been performed inside the critical section. The only relatively recent changes have been addressing review comments on the documentation, which is in a much better shape thanks to the efforts of Ben and Ingo. I was initially planning to split this into two pull requests so that you could run the coccinelle script yourself, however it's been plain sailing in linux-next so I've just included the whole lot here to keep things simple" * tag 'arm64-mmiowb' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (23 commits) docs/memory-barriers.txt: Update I/O section to be clearer about CPU vs thread docs/memory-barriers.txt: Fix style, spacing and grammar in I/O section arch: Remove dummy mmiowb() definitions from arch code net/ethernet/silan/sc92031: Remove stale comment about mmiowb() i40iw: Redefine i40iw_mmiowb() to do nothing scsi/qla1280: Remove stale comment about mmiowb() drivers: Remove explicit invocations of mmiowb() drivers: Remove useless trailing comments from mmiowb() invocations Documentation: Kill all references to mmiowb() riscv/mmiowb: Hook up mmwiob() implementation to asm-generic code powerpc/mmiowb: Hook up mmwiob() implementation to asm-generic code ia64/mmiowb: Add unconditional mmiowb() to arch_spin_unlock() mips/mmiowb: Add unconditional mmiowb() to arch_spin_unlock() sh/mmiowb: Add unconditional mmiowb() to arch_spin_unlock() m68k/io: Remove useless definition of mmiowb() nds32/io: Remove useless definition of mmiowb() x86/io: Remove useless definition of mmiowb() arm64/io: Remove useless definition of mmiowb() ARM/io: Remove useless definition of mmiowb() mmiowb: Hook up mmiowb helpers to spinlocks and generic I/O accessors ...
2019-05-07Merge branch 'timers-core-for-linus' of ↵Linus Torvalds1-25/+21
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Ingo Molnar: "This cycle had the following changes: - Timer tracing improvements (Anna-Maria Gleixner) - Continued tasklet reduction work: remove the hrtimer_tasklet (Thomas Gleixner) - Fix CPU hotplug remove race in the tick-broadcast mask handling code (Thomas Gleixner) - Force upper bound for setting CLOCK_REALTIME, to fix ABI inconsistencies with handling values that are close to the maximum supported and the vagueness of when uptime related wraparound might occur. Make the consistent maximum the year 2232 across all relevant ABIs and APIs. (Thomas Gleixner) - various cleanups and smaller fixes" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick: Fix typos in comments tick/broadcast: Fix warning about undefined tick_broadcast_oneshot_offline() timekeeping: Force upper bound for setting CLOCK_REALTIME timer/trace: Improve timer tracing timer/trace: Replace deprecated vsprintf pointer extension %pf by %ps timer: Move trace point to get proper index tick/sched: Update tick_sched struct documentation tick: Remove outgoing CPU from broadcast masks timekeeping: Consistently use unsigned int for seqcount snapshot softirq: Remove tasklet_hrtimer xfrm: Replace hrtimer tasklet with softirq hrtimer mac80211_hwsim: Replace hrtimer tasklet with softirq hrtimer
2019-05-06r8169: add rtl8168g_set_pause_thresholdsHeiner Kallweit1-6/+11
Based on info from Realtek add a function for defining the thresholds controlling ethernet flow control. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-06r8169: add rtl_set_fifo_sizeHeiner Kallweit1-12/+16
Based on info from Realtek replace FIFO size config magic with a function. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-06mlxsw: spectrum: Implement loopback ethtool featureJiri Pirko1-2/+33
Allow user to enable loopback feature for individual ports using ethtool. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-06mlxsw: reg: Add Port Physical Loopback RegisterJiri Pirko1-0/+37
The PPLR register allows configuration of the port's loopback mode. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-06r8169: move EEE LED config to rtl8168_config_eee_macHeiner Kallweit1-15/+4
Move adjusting the EEE LED frequency to rtl8168_config_eee_mac. Exclude RTL8411 (version 38) like in the existing code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-06r8169: simplify rtl_writephy_batch and rtl_ephy_initHeiner Kallweit1-48/+52
Make both functions macros to allow omitting the ARRAY_SIZE(x) argument. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-06net: dsa: sja1105: Add support for Spanning Tree ProtocolVladimir Oltean1-9/+99
While not explicitly documented as supported in UM10944, compliance with the STP states can be obtained by manipulating 3 settings at the (per-port) MAC config level: dynamic learning, inhibiting reception of regular traffic, and inhibiting transmission of regular traffic. In all these modes, transmission and reception of special BPDU frames from the stack is still enabled (not inhibited by the MAC-level settings). On ingress, BPDUs are classified by the MAC filter as link-local (01-80-C2-00-00-00) and forwarded to the CPU port. This mechanism works under all conditions (even without the custom 802.1Q tagging) because the switch hardware inserts the source port and switch ID into bytes 4 and 5 of the MAC-filtered frames. Then the DSA .rcv handler needs to put back zeroes into the MAC address after decoding the source port information. On egress, BPDUs are transmitted using management routes from the xmit worker thread. Again this does not require switch tagging, as the switch port is programmed through SPI to hold a temporary (single-fire) route for a frame with the programmed destination MAC (01-80-C2-00-00-00). STP is activated using the following commands and was tested by connecting two front-panel ports together and noticing that switching loops were prevented (one port remains in the blocking state): $ ip link add name br0 type bridge stp_state 1 && ip link set br0 up $ for eth in $(ls /sys/devices/platform/soc/2100000.spi/spi_master/spi0/spi0.1/net/); do ip link set ${eth} master br0 && ip link set ${eth} up; done Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-06net: dsa: sja1105: Add support for traffic through standalone portsVladimir Oltean3-6/+139
In order to support this, we are creating a make-shift switch tag out of a VLAN trunk configured on the CPU port. Termination of normal traffic on switch ports only works when not under a vlan_filtering bridge. Termination of management (PTP, BPDU) traffic works under all circumstances because it uses a different tagging mechanism (incl_srcpt). We are making use of the generic CONFIG_NET_DSA_TAG_8021Q code and leveraging it from our own CONFIG_NET_DSA_TAG_SJA1105. There are two types of traffic: regular and link-local. The link-local traffic received on the CPU port is trapped from the switch's regular forwarding decisions because it matched one of the two DMAC filters for management traffic. On transmission, the switch requires special massaging for these link-local frames. Due to a weird implementation of the switching IP, by default it drops link-local frames that originate on the CPU port. It needs to be told where to forward them to, through an SPI command ("management route") that is valid for only a single frame. So when we're sending link-local traffic, we are using the dsa_defer_xmit mechanism. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-06net: dsa: mv88e6xxx: refine SMI supportVivien Didelot5-170/+219
The Marvell SOHO switches have several ways to access the internal registers. One of them being the System Management Interface (SMI), using the MDC and MDIO pins, with direct and indirect variants. In preparation for adding support for other register accesses, move the SMI code into its own files. At the same time, refine the code to make it clear that the indirect variant is implemented using the direct variant accessing only two registers for command and data. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-06nfp: flower: add qos offload stats request and replyPieter Jansen van Vuuren5-0/+210
Add stats request function that sends a stats request message to hw for a specific police-filter. Process stats reply from hw and update the stored qos structure. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-06nfp: flower: add qos offload install and remove functionality.Pieter Jansen van Vuuren3-1/+174
Add install and remove offload functionality for qos offloads. We first check that a police filter can be implemented by the VF rate limiting feature in hw, then we install the filter via the qos infrastructure. Finally we implement the mechanism for removing these types of filters. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-06nfp: flower: add qos offload frameworkPieter Jansen van Vuuren4-1/+29
Introduce matchall filter offload infrastructure that is needed to offload qos features like policing. Subsequent patches will make use of police-filters for ingress rate limiting. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-06mlxsw: use intermediate representation for matchall offloadPieter Jansen van Vuuren1-19/+19
Updates the Mellanox spectrum driver to use the newer intermediate representation for flow actions in matchall offloads. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-06net: wireless: support of_get_mac_address new ERR_PTR errorPetr Štetiar3-3/+3
There was NVMEM support added to of_get_mac_address, so it could now return ERR_PTR encoded error values, so we need to adjust all current users of of_get_mac_address to this new fact. Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-06net: usb: support of_get_mac_address new ERR_PTR errorPetr Štetiar2-2/+2
There was NVMEM support added to of_get_mac_address, so it could now return ERR_PTR encoded error values, so we need to adjust all current users of of_get_mac_address to this new fact. Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-06net: davinci: support of_get_mac_address new ERR_PTR errorPetr Štetiar1-10/+6
There was NVMEM support added directly to of_get_mac_address, and it uses nvmem_get_mac_address under the hood, so we can remove it. As of_get_mac_address can now return ERR_PTR encoded error values, adjust to that as well. Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-06net: macb: support of_get_mac_address new ERR_PTR errorPetr Štetiar1-7/+5
There was NVMEM support added directly to of_get_mac_address, and it uses nvmem_get_mac_address under the hood, so we can remove it. As of_get_mac_address can now return ERR_PTR encoded error values, adjust to that as well. Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-25 17:00:27 +0300