summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2018-12-16net: mvneta: fix operation for 64K PAGE_SIZEMarcin Wojtas1-3/+3
Recent changes in the mvneta driver reworked allocation and handling of the ingress buffers to use entire pages. Apart from that in SW BM scenario the HW must be informed via PRXDQS about the biggest possible incoming buffer that can be propagated by RX descriptors. The BufferSize field was filled according to the MTU-dependent pkt_size value. Later change to PAGE_SIZE broke RX operation when usin 64K pages, as the field is simply too small. This patch conditionally limits the value passed to the BufferSize of the PRXDQS register, depending on the PAGE_SIZE used. On the occasion remove now unused frag_size field of the mvneta_port structure. Fixes: 562e2f467e71 ("net: mvneta: Improve the buffer allocation method for SWBM") Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16net: hns: Fix ping failed when use net bridge and send multicastYonglong Liu1-41/+216
Create a net bridge, add eth and vnet to the bridge. The vnet is used by a virtual machine. When ping the virtual machine from the outside host and the virtual machine send multicast at the same time, the ping package will lost. The multicast package send to the eth, eth will send it to the bridge too, and the bridge learn the mac of eth. When outside host ping the virtual mechine, it will match the promisc entry of the eth which is not expected, and the bridge send it to eth not to vnet, cause ping lost. So this patch change promisc tcam entry position to the END of 512 tcam entries, which indicate lower priority. And separate one promisc entry to two: mc & uc, to avoid package match the wrong tcam entry. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16net: hns: Add mac pcs config when enable|disable macYonglong Liu2-4/+11
In some case, when mac enable|disable and adjust link, may cause hard to link(or abnormal) between mac and phy. This patch adds the code for rx PCS to avoid this bug. Disable the rx PCS when driver disable the gmac, and enable the rx PCS when driver enable the mac. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16net: hns: Fix ntuple-filters status error.Yonglong Liu1-1/+1
The ntuple-filters features is forced on by chip. But it shows "ntuple-filters: off [fixed]" when use ethtool. This patch make it correct with "ntuple-filters: on [fixed]". Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16net: hns: Avoid net reset caused by pause frames stormYonglong Liu1-2/+10
There will be a large number of MAC pause frames on the net, which caused tx timeout of net device. And then the net device was reset to try to recover it. So that is not useful, and will cause some other problems. So need doubled ndev->watchdog_timeo if device watchdog occurred until watchdog_timeo up to 40s and then try resetting to recover it. When collecting dfx information such as hardware registers when tx timeout. Some registers for count were cleared when read. So need move this task before update net state which also read the count registers. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16net: hns: Free irq when exit from abnormal branchYonglong Liu1-1/+22
1.In "hns_nic_init_irq", if request irq fail at index i, the function return directly without releasing irq resources that already requested. 2.In "hns_nic_net_up" after "hns_nic_init_irq", if exceptional branch occurs, irqs that already requested are not release. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16net: hns: Clean rx fbd when ae stopped.Yonglong Liu1-0/+3
If there are packets in hardware when changing the speed or duplex, it may cause hardware hang up. This patch adds the code to wait rx fbd clean up when ae stopped. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16net: hns: Fixed bug that netdev was opened twiceYonglong Liu1-0/+3
After resetting dsaf to try to repair chip error such as ecc error, the net device will be open if net interface is up. But at this time if there is the users set the net device up with the command ifconfig, the net device will be opened twice consecutively. Function napi_enable was called when open device. And Kernel panic will be occurred if it was called twice consecutively. Such as follow: static inline void napi_enable(struct napi_struct *n) { BUG_ON(!test_bit(NAPI_STATE_SCHED, &n->state)); smp_mb__before_clear_bit(); clear_bit(NAPI_STATE_SCHED, &n->state); } [37255.571996] Kernel panic - not syncing: BUG! [37255.595234] Call trace: [37255.597694] [<ffff80000008ab48>] dump_backtrace+0x0/0x1a0 [37255.603114] [<ffff80000008ad08>] show_stack+0x20/0x28 [37255.608187] [<ffff8000009c4944>] dump_stack+0x98/0xb8 [37255.613258] [<ffff8000009c149c>] panic+0x10c/0x26c [37255.618070] [<ffff80000070f134>] hns_nic_net_up+0x30c/0x4e0 [37255.623664] [<ffff80000070f39c>] hns_nic_net_open+0x94/0x12c [37255.629346] [<ffff80000084be78>] __dev_open+0xf4/0x168 [37255.634504] [<ffff80000084c1ac>] __dev_change_flags+0x98/0x15c [37255.640359] [<ffff80000084c29c>] dev_change_flags+0x2c/0x68 [37255.769580] [<ffff8000008dc400>] devinet_ioctl+0x650/0x704 [37255.775086] [<ffff8000008ddc38>] inet_ioctl+0x98/0xb4 [37255.780159] [<ffff800000827b7c>] sock_do_ioctl+0x44/0x84 [37255.785490] [<ffff800000828e04>] sock_ioctl+0x248/0x30c [37255.790737] [<ffff80000026dc6c>] do_vfs_ioctl+0x480/0x618 [37255.796156] [<ffff80000026de94>] SyS_ioctl+0x90/0xa4 [37255.801139] SMP: stopping secondary CPUs [37255.805079] kbox: catch panic event. [37255.809586] collected_len = 128928, LOG_BUF_LEN_LOCAL = 131072 [37255.816103] flush cache 0xffff80003f000000 size 0x800000 [37255.822192] flush cache 0xffff80003f000000 size 0x800000 [37255.828289] flush cache 0xffff80003f000000 size 0x800000 [37255.834378] kbox: no notify die func register. no need to notify [37255.840413] ---[ end Kernel panic - not syncing: BUG! This patchset fix this bug according to the flag NIC_STATE_DOWN. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16net: hns: Some registers use wrong address according to the datasheet.Yonglong Liu2-127/+127
According to the hip06 datasheet: 1.Six registers use wrong address: RCB_COM_SF_CFG_INTMASK_RING RCB_COM_SF_CFG_RING_STS RCB_COM_SF_CFG_RING RCB_COM_SF_CFG_INTMASK_BD RCB_COM_SF_CFG_BD_RINT_STS DSAF_INODE_VC1_IN_PKT_NUM_0_REG 2.The offset of DSAF_INODE_VC1_IN_PKT_NUM_0_REG should be 0x103C + 0x80 * all_chn_num 3.The offset to show the value of DSAF_INODE_IN_DATA_STP_DISC_0_REG is wrong, so the value of DSAF_INODE_SW_VLAN_TAG_DISC_0_REG will be overwrite These registers are only used in "ethtool -d", so that did not cause ndev to misfunction. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16net: hns: All ports can not work when insmod hns ko after rmmod.Yonglong Liu2-0/+18
There are two test cases: 1. Remove the 4 modules:hns_enet_drv/hns_dsaf/hnae/hns_mdio, and install them again, must use "ifconfig down/ifconfig up" command pair to bring port to work. This patch calls phy_stop function when init phy to fix this bug. 2. Remove the 2 modules:hns_enet_drv/hns_dsaf, and install them again, all ports can not use anymore, because of the phy devices register failed(phy devices already exists). Phy devices are registered when hns_dsaf installed, this patch removes them when hns_dsaf removed. The two cases are sometimes related, fixing the second case also requires fixing the first case, so fix them together. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16net: hns: Incorrect offset address used for some registers.Yonglong Liu1-2/+2
According to the hip06 Datasheet: 1. The offset of INGRESS_SW_VLAN_TAG_DISC should be 0x1A00+4*all_chn_num 2. The offset of INGRESS_IN_DATA_STP_DISC should be 0x1A50+4*all_chn_num Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16Merge tag 'mlx5e-updates-2018-12-14' of ↵David S. Miller13-137/+1000
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5e-updates-2018-12-14 (VF Lag) From Aviv Heller, Subsequent patches introduce VF LAG, which provdies load-balancing and high-availability capabilities for VFs associated with different physical ports of the same Connect-X card. This series consists of the following: - mlx5 devcom, driver infrastructure that facilitates operations that involve both core devices (physical functions) of the same card, to synchronize and communicate between two driver instances of the same card. - Infrastructure for TC rule duplication. - Changes to LAG logic to enable its use when SR-IOV is enabled - PFs in switchdev mode is the only mode currently supported. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16net: socionext: remove mmio reads on TxIlias Apalodimas1-43/+54
Currently the driver issues 2 mmio reads to figure out the number of transmitted packets and clean them. We can get rid of the expensive reads since BIT 31 of the Tx descriptor can be used for that. We can also remove the budget counting of Tx completions since all of the descriptors are not deliberately processed. Performance numbers using pktgen are: size pre-patch(pps) post-patch(pps) 64 362483 427916 128 358315 411686 256 352725 389683 512 215675 216464 1024 113812 114442 Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16net: socionext: correctly recover txq after being fullIlias Apalodimas1-11/+45
Running pktgen with packets sizes > 512b ends up in the interface Txq getting stuck. "netsec 522d0000.ethernet eth0: netsec_netdev_start_xmit: TxQFull!" appears on dmesg but the interface never recovers. It requires an ifconfig down/up to make the interface usable again. The reason that triggers this, is a race condition between .ndo_start_xmit and the napi completion. The available budget is calculated first and indicates the queue is full. Due to a costly netif_err() the queue is not stopped in time while the napi completion runs, clears the irq and frees up descriptors, thus the queue never wakes up again. Fix this by moving the print after stopping the queue, make the print ratelimited, add barriers and check for cleaned descriptors.. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15qmi_wwan: Added support for Telit LN940 seriesJörgen Storvist1-0/+1
Added support for the Telit LN940 series cellular modules QMI interface. QMI_QUIRK_SET_DTR quirk requied for Qualcomm MDM9x40 chipset. Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15qmi_wwan: Added support for Fibocom NL668 seriesJörgen Storvist1-0/+1
Added support for Fibocom NL668 series QMI interface. Using QMI_QUIRK_SET_DTR required for Qualcomm MDM9x07 chipsets. Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15r8169: improve spurious interrupt detectionHeiner Kallweit1-1/+2
Improve detection of spurious interrupts by checking against the interrupt mask as currently set in the chip. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15cxgb4: remove DEFINE_SIMPLE_DEBUGFS_FILE()Yangtao Li3-117/+25
We already have the DEFINE_SHOW_ATTRIBUTE. There is no need to define such a macro, so remove DEFINE_SIMPLE_DEBUGFS_FILE. Also use the DEFINE_SHOW_ATTRIBUTE macro to simplify some code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15net: hns3: Add "tm map" status information query functionliuzhongzhu4-0/+93
This patch prints dcb register status information by module. debugfs command: root@(none)# echo dump tm map 100 > cmd queue_id | qset_id | pri_id | tc_id 0100 | 0065 | 08 | 00 root@(none)# Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15net: hns3: Add "queue map" information query functionliuzhongzhu7-2/+76
This patch prints queue map information. debugfs command: echo dump queue map > cmd Sample Command: root@(none)# echo queue map > cmd local queue id | global queue id | vector id 0 32 769 1 33 770 2 34 771 3 35 772 4 36 773 5 37 774 6 38 775 7 39 776 8 40 777 9 41 778 10 42 779 11 43 780 12 44 781 13 45 782 14 46 783 15 47 784 root@(none)# Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15net: hns3: Add "dcb register" status information query functionliuzhongzhu4-0/+134
This patch prints dcb register status information by module. debugfs command: root@(none)# echo dump reg dcb > cmd roce_qset_mask: 0x0 nic_qs_mask: 0x0 qs_shaping_pass: 0x0 qs_bp_sts: 0x0 pri_mask: 0x0 pri_cshaping_pass: 0x0 pri_pshaping_pass: 0x0 root@(none)# Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15net: hns3: Add "status register" information query functionliuzhongzhu4-0/+885
This patch prints status register information by module. debugfs command: echo dump reg [mode name] > cmd Sample Command: root@(none)# echo dump reg bios common > cmd BP_CPU_STATE: 0x0 DFX_MSIX_INFO_NIC_0: 0xc000 DFX_MSIX_INFO_NIC_1: 0xf DFX_MSIX_INFO_NIC_2: 0x2 DFX_MSIX_INFO_NIC_3: 0x2 DFX_MSIX_INFO_ROC_0: 0xc000 DFX_MSIX_INFO_ROC_1: 0x0 DFX_MSIX_INFO_ROC_2: 0x0 DFX_MSIX_INFO_ROC_3: 0x0 root@(none)# Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15net: hns3: Add "manager table" information query functionliuzhongzhu4-2/+100
This patch prints manager table information. debugfs command: echo dump mng tbl > cmd Sample Command: root@(none)# echo dump mng tbl > cmd entry|mac_addr |mask|ether|mask|vlan|mask|i_map|i_dir|e_type 00 |01:00:5e:00:00:01|0 |00000|0 |0000|0 |00 |00 |0 01 |c2:f1:c5:82:68:17|0 |00000|0 |0000|0 |00 |00 |0 root@(none)# Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15net: hns3: Add "bd info" query functionliuzhongzhu1-1/+78
This patch prints Sending and receiving package descriptor information. debugfs command: echo dump bd info 1 > cmd Sample Command: root@(none)# echo bd info 1 > cmd hns3 0000:7d:00.0: TX Queue Num: 0, BD Index: 0 hns3 0000:7d:00.0: (TX) addr: 0x0 hns3 0000:7d:00.0: (TX)vlan_tag: 0 hns3 0000:7d:00.0: (TX)send_size: 0 hns3 0000:7d:00.0: (TX)vlan_tso: 0 hns3 0000:7d:00.0: (TX)l2_len: 0 hns3 0000:7d:00.0: (TX)l3_len: 0 hns3 0000:7d:00.0: (TX)l4_len: 0 hns3 0000:7d:00.0: (TX)vlan_tag: 0 hns3 0000:7d:00.0: (TX)tv: 0 hns3 0000:7d:00.0: (TX)vlan_msec: 0 hns3 0000:7d:00.0: (TX)ol2_len: 0 hns3 0000:7d:00.0: (TX)ol3_len: 0 hns3 0000:7d:00.0: (TX)ol4_len: 0 hns3 0000:7d:00.0: (TX)paylen: 0 hns3 0000:7d:00.0: (TX)vld_ra_ri: 0 hns3 0000:7d:00.0: (TX)mss: 0 hns3 0000:7d:00.0: RX Queue Num: 0, BD Index: 120 hns3 0000:7d:00.0: (RX)addr: 0xffee7000 hns3 0000:7d:00.0: (RX)pkt_len: 0 hns3 0000:7d:00.0: (RX)size: 0 hns3 0000:7d:00.0: (RX)rss_hash: 0 hns3 0000:7d:00.0: (RX)fd_id: 0 hns3 0000:7d:00.0: (RX)vlan_tag: 0 hns3 0000:7d:00.0: (RX)o_dm_vlan_id_fb: 0 hns3 0000:7d:00.0: (RX)ot_vlan_tag: 0 hns3 0000:7d:00.0: (RX)bd_base_info: 0 Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15w90p910_ether: remove incorrect __init annotationArnd Bergmann1-1/+1
The get_mac_address() function is normally inline, but when it is not, we get a warning that this configuration is broken: WARNING: vmlinux.o(.text+0x4aff00): Section mismatch in reference from the function w90p910_ether_setup() to the function .init.text:get_mac_address() The function w90p910_ether_setup() references the function __init get_mac_address(). This is often because w90p910_ether_setup lacks a __init Remove the __init to make it always do the right thing. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15r8152: Add support for MAC address pass through on RTL8153-BNDMario Limonciello1-11/+22
All previous docks and dongles that have supported this feature use the RTL8153-AD chip. RTL8153-BND is a new chip that will be used in upcoming Dell type-C docks. It should be added to the whitelist of devices to activate MAC address pass through. Per confirming with Realtek all devices containing RTL8153-BND should activate MAC pass through and there won't use pass through bit on efuse like in RTL8153-AD. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15crypto/chelsio/chtls: macro correction in tx pathAtul Gupta1-0/+3
corrected macro used in tx path. removed redundant hdrlen and check for !page in chtls_sendmsg Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15net/ibmvnic: Remove tests of member addressWen Yang1-5/+2
The driver was checking for non-NULL address. - adapter->napi[i] This is pointless as these will be always non-NULL, since the 'dapter->napi' is allocated in init_napi(). It is safe to get rid of useless checks for addresses to fix the coccinelle warning: >>drivers/net/ethernet/ibm/ibmvnic.c: test of a variable/field address Since such statements always return true, they are redundant. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> CC: Michael Ellerman <mpe@ellerman.id.au> CC: Thomas Falcon <tlfalcon@linux.ibm.com> CC: John Allen <jallen@linux.ibm.com> CC: "David S. Miller" <davem@davemloft.net> CC: linuxppc-dev@lists.ozlabs.org CC: netdev@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15tun: replace get_cpu_ptr with this_cpu_ptr when bh disabledPrashant Bhole1-2/+4
tun_xdp_one() runs with local bh disabled. So there is no need to disable preemption by calling get_cpu_ptr while updating stats. This patch replaces the use of get_cpu_ptr() with this_cpu_ptr() as a micro-optimization. Also removes related put_cpu_ptr call. Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15drivers: net: xgene: Remove unnecessary forward declarationsNathan Chancellor1-3/+0
Clang warns: drivers/net/ethernet/apm/xgene/xgene_enet_main.c:33:36: warning: tentative array definition assumed to have one element static const struct acpi_device_id xgene_enet_acpi_match[]; ^ 1 warning generated. Both xgene_enet_acpi_match and xgene_enet_of_match are defined before their uses at the bottom of the file so this is unnecessary. When CONFIG_ACPI is disabled, ACPI_PTR becomes NULL so xgene_enet_acpi_match doesn't need to be defined. Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15net/mlx5: Handle LAG FW commands failure gracefullyAviv Heller1-21/+70
When create_lag or destroy_lag FW commands fail, display an appropriate error message, and try to recover, if possible. Signed-off-by: Aviv Heller <avivh@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Yevgeny Kliteynik <kliteyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-15net/mlx5: Make RoCE and SR-IOV LAG modes explicitAviv Heller4-20/+67
With the introduction of SR-IOV LAG, checking whether LAG is active is no longer good enough, since RoCE and SR-IOV LAG each entails different behavior by both the core and infiniband drivers. This patch introduces facilities to discern LAG type, in addition to mlx5_lag_is_active(). These are implemented in such a way as to allow more complex mode combinations in the future. Signed-off-by: Aviv Heller <avivh@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-15net/mlx5: Rename mlx5_lag_is_bonded() to __mlx5_lag_is_active()Aviv Heller1-9/+9
The new name better represents the function's aim, and sets a precedent for a '__' prefix for internal, non-locked versions of LAG APIs. Signed-off-by: Aviv Heller <avivh@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-15net/mlx5: Allow co-enablement of uplink LAG and SRIOVRabie Loulou1-2/+4
Enable setting uplink LAG if sriov is enabled on both ports in switchdev mode. Once the sriov mode is changed from switchdev for any of the ports, the LAG instance is disabled. Signed-off-by: Rabie Loulou <rabiel@mellanox.com> Signed-off-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-15net/mlx5: Allow/disallow LAG according to pre-req onlyRabie Loulou5-61/+36
Remove the lag forbid/allow functions, change the lag prereq check to run in the do-bond logic, so every change in the prereq state will cause LAG to be disabled/enabled accordingly after the next do-bond run. Add lag update function, so every component which changes the prereq state and want the LAG to re-calc the conditions can call the update function. Signed-off-by: Rabie Loulou <rabiel@mellanox.com> Signed-off-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-15net/mlx5: Adjustments for the activate LAG logic to run under sriovRabie Loulou1-12/+21
When HW lag is set/unset, roce must not be enabled on the port, as such we wrap such changes with roce enable/disable either directly or through re-creation of IB device. Currently, lag and sriov are mutually exclusive, so by definition this code doesn't run under sriov. Towards changing this exclusion, we need to make sure that roce will not be enabled on the eswitch manager port under sriov since this is requirement of the switchdev mode. We are going strict here and avoiding this all together under sriov. Signed-off-by: Rabie Loulou <rabiel@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-15net/mlx5e: Duplicate offloaded TC eswitch rules under uplink LAGAviv Heller1-1/+10
Under uplink LAG, packets that match a flow might arrive on both uplink ports and transmitted through both as part of supporting aggregation and high-availability. When the netdevs representing the uplinks are set into LAG (bonding, teaming), duplicate the TC flow offloading into each of the per-uplink e-switches. Duplication is not required if the source is the bond device, since in this case it is assumed that the bond and the uplink netdevs share the same TC block, and thus duplication will occur naturally by the stack. Note that under encapsulation scheme, both flows will use the same neighbour and hence both will contribute to the last-used feedback towards the stack. Signed-off-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Rabie Loulou <rabiel@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-15net/mlx5e: Offload TC e-switch rules with egress LAG deviceRabie Loulou1-0/+9
When parsing TC FDB actions, if the egress device is a bond/team net-device which enslaved the uplink representor of the e-switch, use the uplink representor as the destination in the HW rule. Signed-off-by: Rabie Loulou <rabiel@mellanox.com> Signed-off-by: Aviv Heller <avivh@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-15net/mlx5e: In case of LAG, one switch parent id is used for all representorsRabie Loulou2-13/+48
When the uplink representors are put into lag, set all the representors (VFs and uplinks) of the same NIC to return the same switchdev id. Currently, the route lookup code on the encapsulation offload path assumes that same switchdev id for the source and dest devices means that the dest is also mlx5 HW netdev. This doesn't hold anymore when we align the switchdev Id of the uplinks to be same, which in turn causes the bond/team to return that id to the caller. As such, enhance the relevant check to take into account the uplink lag case. Signed-off-by: Rabie Loulou <rabiel@mellanox.com> Signed-off-by: Aviv Heller <avivh@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-15net/mlx5e: Enhance flow counter scheme for offloaded TC eswitch rulesShahar Klein2-3/+12
Assign a counter dev attribute according to device capability and use it for management of counters related to offloaded eswitch TC flows. With upcoming support for uplink LAG, we have two HW rules per one logical SW (TC) rule. Although the HW supports attaching one counter to multiple rules, we are allocating counter per HW rule. We need this separation for two reasons: 1. "flow eswitch" counter affinity HW require the counter to be allocated on the device where the eswitch rule is set. 2. for some use-cases (multi-path routing) each HW flow relates to different neighbour, hence our neigh update logic must have a per-rule HW accountant in order to provide the proper feedback to the kernel. Signed-off-by: Shahar Klein <shahark@mellanox.com> Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-15net/mlx5e: Infrastructure for duplicated offloading of TC flowsRoi Dayan3-8/+176
Under uplink LAG or multipath schemes, traffic that matches one flow might arrive on both uplink ports and transmitted through both as part of supporting aggregation and high-availability. To cope with the fact that the SW model might use logical SW port (e.g uplink team or bond) but we have two HW ports with e-switch on each, there are cases where in order to offload a SW TC rule we need to duplicate it to two HW flows. Since each HW rule has its own counter we also aggregate the counter of both rules when a flow stats query is executed from user-space. Introduce the changes for the different elements (add/delete/stats), currently nothing is duplicated. Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Shahar Klein <shahark@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-15net/mlx5e: E-Switch, Add peer miss rulesRoi Dayan3-1/+225
In the sriov offloads mode, packets that are not matched by any other rule are sent towards the e-switch vport manager for further processing. Under upcoming patches (e.g for uplink LAG), packets sent from VF vports belonging to esw0 (e-switch related to PF0) might end up in esw1 (e-switch related to PF1) due to muxing logic applied by the FW. In such a case we still want the missed packet to be sent to the "base" esw manager vport in order to present the control plane a consistent view of the source (VF reresentor) port. Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Shahar Klein <shahark@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-15net/mlx5: Introduce inter-device communication mechanismAviv Heller4-4/+311
This introduces devcom, a generic mechanism for performing operations on both physical functions of the same Connect-X card. The first user of this API is merged eswitch, which will be introduced in subsequent patches. Signed-off-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-15hamradio, ppp: change semaphore to completionArnd Bergmann3-13/+13
ppp and hamradio have copies of the same code that uses a semaphore in place of a completion for historic reasons. Make it use the proper interface instead in all copies. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15hns3: prevent building without CONFIG_INETArnd Bergmann1-0/+1
We now get a link failure when CONFIG_INET is disabled, since tcp_gro_complete is unavailable: drivers/net/ethernet/hisilicon/hns3/hns3_enet.o: In function `hns3_set_gro_param': hns3_enet.c:(.text+0x230c): undefined reference to `tcp_gro_complete' Add an explicit CONFIG_INET dependency here to avoid the broken configuration. Fixes: a6d53b97a2e7 ("net: hns3: Adds GRO params to SKB for the stack") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-14Merge branch 'mlx5-next' of ↵Saeed Mahameed2-20/+40
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux mlx5-next shared branch with rdma subtree to avoid mlx5 rdma v.s. netdev conflicts. Highlights: 1) Lag refactroing and flow counter affinity bits. 2) mlx5 core cleanups By Roi Dayan (2) and others * 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: net/mlx5: Fold the modify lag code into function net/mlx5: Add lag affinity info to log net/mlx5: Split the activate lag function into two routines net/mlx5: E-Switch, Introduce flow counter affinity IB/mlx5: Unify e-switch representors load approach between uplink and VFs net/mlx5: Use lowercase 'X' for hex values net/mlx5: Remove duplicated include from eswitch.c Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-14net/mlx5: Fold the modify lag code into functionShahar Klein1-16/+28
Handle the code of modifying the lag affinity within a separate function. Signed-off-by: Shahar Klein <shahark@mellanox.com> Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-14net/mlx5: Add lag affinity info to logRoi Dayan1-0/+3
Report the initial LAG port affinity upon LAG creation. Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Shahar Klein <shahark@mellanox.com> Reviewed-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-14net/mlx5: Split the activate lag function into two routinesRoi Dayan1-4/+10
Split the activate lag function in order to be symmetric with the deactivate lag function. Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Shahar Klein <shahark@mellanox.com> Reviewed-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-14iwlwifi: mvm: don't check if a pointer is set if it can't be unsetEmmanuel Grumbach1-20/+17
We used to have many versions of statistics notification coming from the firmware. In one of the cleanup patches, we forgot to clean the code that checks if data->general is set. Since it is always set, remove the check. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-23 10:11:23 +0300