summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2012-07-17can: flexcan: make flexcan_priv.devtype_data member point to const dataMarc Kleine-Budde1-2/+2
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-07-17bnx2: Try to recover from PCI block resetMichael Chan1-0/+7
If the PCI block has reset, the memory enable bit will be reset and the device will not respond to MMIO access. bnx2_reset_task() currently will not recover when this happens. Add code to detect this condition and restore the PCI state. This scenario has been reported by some users. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17tg3: Add hwmon support for temperatureMichael Chan2-0/+150
Some tg3 devices have management firmware that can export sensor data. Export temperature sensor reading via hwmon sysfs. [hwmon interface suggested by Ben Hutchings <bhutchings@solarflare.com>] Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17tg3: Add APE scratchpad read functionMatt Carlson2-2/+86
for retreiving temperature sensor data. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17tg3: Add common function tg3_ape_event_lock()Matt Carlson1-24/+32
by refactoring code in tg3_ape_send_event(). The common function will be used in subsequent patches. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17tg3: Fix the setting of the APE_HAS_NCSI flagMichael Chan1-21/+21
The driver currently skips setting this flag if the VPD contains the firmware version string. We fix this by separating the probing of NCSI from the reading of the NCSI version string. The APE_HAS_NCSI flag is needed to properly read sensor data. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17Merge branch 'master' of ↵David S. Miller11-225/+265
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next Jett Kirsher says: ==================== This series contains updates to e1000e and ixgbe. ... Alexander Duyck (5): ixgbe: Simplify logic for getting traffic class from user priority ixgbe: Cleanup unpacking code for DCB ixgbe: Populate the prio_tc_map in ixgbe_setup_tc ixgbe: Add function for obtaining FCoE TC based on FCoE user priority ixgbe: Merge FCoE set_num and cache_ring calls into RSS/DCB config ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17be2net: dont pull too much data in skb linear partEric Dumazet1-3/+3
skb_fill_rx_data() pulls 64 byte of data in skb->data Its too much for TCP (with no options) on IPv4, as total size of headers is 14 + 40 = 54 This means tcp stack and splice() are suboptimal, since tcp payload is in part in tcp->data, and in part in skb frag. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17be2net: update driver versionPadmanabh Ratnakar1-1/+1
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17be2net: Add description about various RSS hash typesPadmanabh Ratnakar1-2/+12
Incorporated review comment from Eric Dumazet. Added description about different RSS hash types which adapter is capable of. Will add support for ETHTOOL_GRXFH and ETHTOOL_SRXFX as suggested by Ben Hutchings in a later patch. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17net/mlx4_en: dereferencing freed memoryDan Carpenter1-3/+1
We dereferenced "mclist" after the kfree(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17net/mlx4: off by one in parse_trans_rule()Dan Carpenter1-1/+1
This should be ">=" here instead of ">". MLX4_NET_TRANS_RULE_NUM is 6. We use "spec->id" as an array offset into the __rule_hw_sz[] and __sw_id_hw[] arrays which have 6 elements. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Hadar Hen Zion <hadarh@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17hyperv: Add support for setting MAC from within guestsHaiyang Zhang3-1/+109
This adds support for setting synthetic NIC MAC address from within Linux guests. Before using this feature, the option "spoofing of MAC address" should be enabled at the Hyper-V manager / Settings of the synthetic NIC. Thanks to Kin Cho <kcho@infoblox.com> for the initial implementation and tests. And, thanks to Long Li <longli@microsoft.com> for the debugging works. Reported-and-tested-by: Kin Cho <kcho@infoblox.com> Reported-by: Long Li <longli@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17drivers/net: Use eth_random_addrJoe Perches2-2/+2
Convert the existing uses of random_ether_addr to the new eth_random_addr. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17wireless: Use eth_random_addrJoe Perches10-10/+10
Convert the existing uses of random_ether_addr to the new eth_random_addr. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17net: usb: Use eth_random_addrJoe Perches3-3/+3
Convert the existing uses of random_ether_addr to the new eth_random_addr. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17ethernet: Use eth_random_addrJoe Perches15-16/+16
Convert the existing uses of random_ether_addr to the new eth_random_addr. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17lpc_eth: remove duplicated includeDuan Jiong1-1/+0
Remove duplicated #include <linux/delay.h> in drivers/net/ethernet/nxp/lpc_eth.c Signed-off-by: Duan Jiong<djduanjiong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-15ixgbe: Merge FCoE set_num and cache_ring calls into RSS/DCB configAlexander Duyck2-147/+129
This change merges the ixgbe_cache_ring_fcoe and ixgbe_set_fcoe_queues logic into the DCB and RSS initialization calls. Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-07-15ixgbe: Add function for obtaining FCoE TC based on FCoE user priorityAlexander Duyck4-15/+22
In upcoming patches it will become increasingly common to need to determine the FCoE traffic class in order to determine the correct queues for FCoE. In order to make this easier I am adding a function for obtaining the FCoE traffic class based on the user priority. Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-07-15ixgbe: Populate the prio_tc_map in ixgbe_setup_tcAlexander Duyck4-23/+35
There were cases where the prio_tc_map was not populated when we were calling open. This will result in us incorrectly configuring the traffic classes when DCB is enabled. In order to correct this I have updated the code so that we now populate the values prior to allocating the q_vectors and calling ixgbe_open. Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-07-15ixgbe: Cleanup unpacking code for DCBAlexander Duyck1-25/+22
This is meant to be a generic clean-up of the remaining functions for unpacking data from the DCB structures. The only real changes are: replaced the variable i with tc for functions that were looping through the traffic classes, and added a pointer for tc_class instead of path since that way we only need to pull the pointer once instead of once per loop. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-07-15ixgbe: Simplify logic for getting traffic class from user priorityAlexander Duyck1-7/+23
This patch is meant to help simplify the logic for getting traffic classes from user priorities. To do this I am adding a function named ixgbe_dcb_get_tc_from_up that will go through the traffic classes in reverse order in order to determine which traffic class contains a bit for a given user priority. Adding a declaration for this new function to the header so that we have a centralized means for sorting out traffic classes belonging to features such as FCoE. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-07-14e1000e: Program the correct register for ITR when using MSI-X.Matthew Vick3-7/+31
When configuring interrupt throttling on 82574 in MSI-X mode, we need to be programming the EITR registers instead of the ITR register. -rc2: Renamed e1000_write_itr() to e1000e_write_itr(), fixed whitespace issues, and removed unnecessary !! operation. -rc3: Reduced the scope of the loop variable in e1000e_write_itr(). Signed-off-by: Matthew Vick <matthew.vick@intel.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-07-14e1000e: Cleanup code logic in e1000_check_for_serdes_link_82571()Tushar Dave1-6/+8
Cleanup code to make it more clean and readable. Signed-off-by: Tushar Dave <tushar.n.dave@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-07-14Merge branch 'for-davem' of ↵David S. Miller128-12976/+2633
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John Linville says: ==================== Several drivers see updates: mwifiex, ath9k, iwlwifi, brcmsmac, wlcore/wl12xx/wl18xx, and a handful of others. The bcma bus got a lot of attention from Hauke Mehrtens. The cfg80211 component gets a flurry of patches for multi-channel support, and the mac80211 component gets the first few VHT (11ac) and 60GHz (11ad) patches. This also includes the removal of the iwmc3200 drivers, since the hardware never became available to normal people. Additionally, the NFC subsystem gets a series of updates. According to Samuel, "Here are the interesting bits: - A better error management for the HCI stack. - An LLCP "late" binding implementation for a better NFC SAP usage. SAPs are now reserved only when there's a client for it. - Support for Sony RC-S360 (a.k.a. PaSoRi) pn533 based dongle. We can read and write NFC tags and also establish a p2p link with this dongle now. - A few LLCP fixes." Finally, this includes another pull of the fixes from the wireless tree in order to resolve some merge issues. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-13tg3: add device id of Apple Thunderbolt Ethernet deviceGreg KH1-0/+1
The Apple Thunderbolt ethernet device is already listed in the driver, but not hooked up in the MODULE_DEVICE_TABLE(). This fixes that and allows it to work properly. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12Merge branch 'master' of ↵John W. Linville128-12976/+2633
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2012-07-12be2net: Enable RSS UDP hashing for Lancer and SkyhawkPadmanabh Ratnakar3-0/+12
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12be2net: Fix port name in message during driver loadPadmanabh Ratnakar3-2/+57
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12be2net: Fix cleanup path when EQ creation failsPadmanabh Ratnakar1-2/+3
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12be2net: Activate new FW after FW download for LancerPadmanabh Ratnakar5-78/+180
After FW download, activate new FW by invoking FW reset. Recreate rings once new FW is operational. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12be2net: Fix initialization sequence for LancerPadmanabh Ratnakar3-68/+87
Invoke only required initialization routines for Lancer. Remove invocation of unnecessary routines. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12be2net : Fix die temperature stat for LancerPadmanabh Ratnakar3-7/+8
Query die temperature stat for Lancer to report it correctly in ethtool. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12be2net: Fix error while toggling autoneg of pause parametersPadmanabh Ratnakar1-1/+1
Autonegotiation of pause parameters is possible only on some PHYs. Ability of autoneg of pause parameters is reported by adapter. Autoneg of pause parameters cannot be changed from driver. Fix driver to give error when autoneg mode is toggled by user. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12team: make team_port_enabled() and team_port_txable() static inlineJiri Pirko1-12/+0
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12team: add broadcast modeJiri Pirko3-1/+101
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12team: use function team_port_txable() for determing enabled and up portJiri Pirko2-3/+9
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12Merge branch 'master' of ↵David S. Miller5-209/+127
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next
2012-07-12netxen: fix link notification orderFlavio Leitner1-2/+2
First update the adapter variables with the current speed and mode before fire the notification. Otherwise, the get_settings() may provide old values. Signed-off-by: Flavio Leitner <fbl@redhat.com> Acked-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12smsc95xx: signedness bug in get_regs()Dan Carpenter1-1/+2
"retval" has to be a signed integer for the error handling to work. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12net: add support for NS8390 based eth controllers on some ColdFire CPU boardsGreg Ungerer3-0/+495
A number of older ColdFire CPU based boards use NS8390 based network controllers. Most use the Davicom 9008F or the UMC 9008F. This driver provides the support code to get these devices working on these platforms. Generally the NS8390 based eth device is direct connected via the general purpose bus of the ColdFire CPU. So its addressing and interrupt setup is fixed on each of the different platforms (classic platform setup). This driver is based on the other drivers/net/ethernet/8390 drivers, and includes the lib8390.c code. It uses the existing definitions of the board NS8390 device addresses, interrupts and access types from the arch/m68k/include/asm/mcf8390.h, but moves the IO access functions into the driver code and out of that header. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-11ath5k: replace modparam_all_channels with CONFIG_ATH5K_TEST_CHANNELSLuis R. Rodriguez2-7/+18
This stashes away this feature from standard kernel builds. Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-11i2400m: remove SDIO device supportJohn W. Linville11-1510/+8
SDIO support in this driver was intended to support the iwmc3200 device. This hardware never became available to normal humans. Leaving this driver imposes unwelcome maintenance costs for no clear benefit. Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
2012-07-11rt2x00: remove unused argumentStanislaw Gruszka3-23/+12
Data pointer on rt2x00queue_for_each_entry() is never used - remove it. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-11rt2800lib: merge same definesStanislaw Gruszka1-17/+12
Merge 3290 and 5390 POWER_BOUND and FREQ_OFFSET_BOUND defines. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-11rt2x00pci: small 3290 changes cleanupStanislaw Gruszka1-4/+4
Fix indention and remove unnecessary brackets and compares. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-11carl9170: fix HT peer BA session corruptionChristian Lamparter5-0/+132
This patch adds an alternative tx status path for BlockAck Requests as the hardware doesn't recognize that a BlockAck Requests is usually acked with a BlockAck and not a legacy ACK. Without this patch, the stack would constantly resent old and stale BARs. So, depending on the receiver stack, this could lead to: - "stuck" ba sessions and package loss, as the stale BAR would reset the sequence each time. - lots of reorder releases. - ... Reported-by: Sean Patrick Santos <quantheory@gmail.com> Reported-by: Mikołaj Kuligowski <mikolaj.q@wp.pl> Reported-by: Per-Erik Westerberg <per-erik.westerberg@bredband.net> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-11carl9170: import 1.9.6 firmware headersChristian Lamparter2-4/+7
Import new headers from my firmware branch: <https://github.com/chunkeey/carl9170fw> visit our wiki at: <http://wireless.kernel.org/en/users/Drivers/carl9170.fw> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-11ixgbe: Merge RSS and flow director ring register caching and configurationAlexander Duyck1-74/+24
There are really only 3 modes that can control the number of queues. Those are RSS, DCB, and VMDq/SR-IOV. Currently we have things much more broken up than they need to be for how we are configuring the rings. In order to try and straiten some of this out I am going to start merging similar functionality into single functions. To start with I am merging the Flow Director ring configuration into the RSS ring configuration since Flow Director cannot function with DCB or SR-IOV. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-10 23:57:10 +0300