summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2019-05-16net: phy: fix phy_validate_pauseHeiner Kallweit1-4/+7
[ Upstream commit b4010af981ac8cdf1f7f58eb6b131c482e5dee02 ] We have valid scenarios where ETHTOOL_LINK_MODE_Pause_BIT doesn't need to be supported. Therefore extend the first check to check for rx_pause being set. See also phy_set_asym_pause: rx=0 and tx=1: advertise asym pause only rx=0 and tx=0: stop advertising both pause modes The fixed commit isn't wrong, it's just the one that introduced the linkmode bitmaps. Fixes: 3c1bcc8614db ("net: ethernet: Convert phydev advertize and supported from u32 to link mode") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16tuntap: synchronize through tfiles array instead of tun->numqueuesJason Wang1-1/+6
[ Upstream commit 9871a9e47a2646fe30ae7fd2e67668a8d30912f6 ] When a queue(tfile) is detached through __tun_detach(), we move the last enabled tfile to the position where detached one sit but don't NULL out last position. We expect to synchronize the datapath through tun->numqueues. Unfortunately, this won't work since we're lacking sufficient mechanism to order or synchronize the access to tun->numqueues. To fix this, NULL out the last position during detaching and check RCU protected tfile against NULL instead of checking tun->numqueues in datapath. Cc: YueHaibing <yuehaibing@huawei.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: weiyongjun (A) <weiyongjun1@huawei.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Fixes: c8d68e6be1c3b ("tuntap: multiqueue support") Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16tuntap: fix dividing by zero in ebpf queue selectionJason Wang1-1/+6
[ Upstream commit a35d310f03a692bf4798eb309a1950a06a150620 ] We need check if tun->numqueues is zero (e.g for the persist device) before trying to use it for modular arithmetic. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Fixes: 96f84061620c6("tun: add eBPF based queue selection method") Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16net: ucc_geth - fix Oops when changing number of buffers in the ringChristophe Leroy1-5/+3
[ Upstream commit ee0df19305d9fabd9479b785918966f6e25b733b ] When changing the number of buffers in the RX ring while the interface is running, the following Oops is encountered due to the new number of buffers being taken into account immediately while their allocation is done when opening the device only. [ 69.882706] Unable to handle kernel paging request for data at address 0xf0000100 [ 69.890172] Faulting instruction address: 0xc033e164 [ 69.895122] Oops: Kernel access of bad area, sig: 11 [#1] [ 69.900494] BE PREEMPT CMPCPRO [ 69.907120] CPU: 0 PID: 0 Comm: swapper Not tainted 4.14.115-00006-g179ade8ce3-dirty #269 [ 69.915956] task: c0684310 task.stack: c06da000 [ 69.920470] NIP: c033e164 LR: c02e44d0 CTR: c02e41fc [ 69.925504] REGS: dfff1e20 TRAP: 0300 Not tainted (4.14.115-00006-g179ade8ce3-dirty) [ 69.934161] MSR: 00009032 <EE,ME,IR,DR,RI> CR: 22004428 XER: 20000000 [ 69.940869] DAR: f0000100 DSISR: 20000000 [ 69.940869] GPR00: c0352d70 dfff1ed0 c0684310 f00000a4 00000040 dfff1f68 00000000 0000001f [ 69.940869] GPR08: df53f410 1cc00040 00000021 c0781640 42004424 100c82b6 f00000a4 df53f5b0 [ 69.940869] GPR16: df53f6c0 c05daf84 00000040 00000000 00000040 c0782be4 00000000 00000001 [ 69.940869] GPR24: 00000000 df53f400 000001b0 df53f410 df53f000 0000003f df708220 1cc00044 [ 69.978348] NIP [c033e164] skb_put+0x0/0x5c [ 69.982528] LR [c02e44d0] ucc_geth_poll+0x2d4/0x3f8 [ 69.987384] Call Trace: [ 69.989830] [dfff1ed0] [c02e4554] ucc_geth_poll+0x358/0x3f8 (unreliable) [ 69.996522] [dfff1f20] [c0352d70] net_rx_action+0x248/0x30c [ 70.002099] [dfff1f80] [c04e93e4] __do_softirq+0xfc/0x310 [ 70.007492] [dfff1fe0] [c0021124] irq_exit+0xd0/0xd4 [ 70.012458] [dfff1ff0] [c000e7e0] call_do_irq+0x24/0x3c [ 70.017683] [c06dbe80] [c0006bac] do_IRQ+0x64/0xc4 [ 70.022474] [c06dbea0] [c001097c] ret_from_except+0x0/0x14 [ 70.027964] --- interrupt: 501 at rcu_idle_exit+0x84/0x90 [ 70.027964] LR = rcu_idle_exit+0x74/0x90 [ 70.037585] [c06dbf60] [20000000] 0x20000000 (unreliable) [ 70.042984] [c06dbf80] [c004bb0c] do_idle+0xb4/0x11c [ 70.047945] [c06dbfa0] [c004bd14] cpu_startup_entry+0x18/0x1c [ 70.053682] [c06dbfb0] [c05fb034] start_kernel+0x370/0x384 [ 70.059153] [c06dbff0] [00003438] 0x3438 [ 70.063062] Instruction dump: [ 70.066023] 38a00000 38800000 90010014 4bfff015 80010014 7c0803a6 3123ffff 7c691910 [ 70.073767] 38210010 4e800020 38600000 4e800020 <80e3005c> 80c30098 3107ffff 7d083910 [ 70.081690] ---[ end trace be7ccd9c1e1a9f12 ]--- This patch forbids the modification of the number of buffers in the ring while the interface is running. Fixes: ac421852b3a0 ("ucc_geth: add ethtool support") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16net: seeq: fix crash caused by not set dev.parentThomas Bogendoerfer1-0/+1
[ Upstream commit 5afcd14cfc7fed1bcc8abcee2cef82732772bfc2 ] The old MIPS implementation of dma_cache_sync() didn't use the dev argument, but commit c9eb6172c328 ("dma-mapping: turn dma_cache_sync into a dma_map_ops method") changed that, so we now need to set dev.parent. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16net: macb: Change interrupt and napi enable order in openHarini Katakam1-3/+3
[ Upstream commit 0504453139ef5a593c9587e1e851febee859c7d8 ] Current order in open: -> Enable interrupts (macb_init_hw) -> Enable NAPI -> Start PHY Sequence of RX handling: -> RX interrupt occurs -> Interrupt is cleared and interrupt bits disabled in handler -> NAPI is scheduled -> In NAPI, RX budget is processed and RX interrupts are re-enabled With the above, on QEMU or fixed link setups (where PHY state doesn't matter), there's a chance macb RX interrupt occurs before NAPI is enabled. This will result in NAPI being scheduled before it is enabled. Fix this macb open by changing the order. Fixes: ae1f2a56d273 ("net: macb: Added support for many RX queues") Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16net: ethernet: stmmac: dwmac-sun8i: enable support of unicast filteringCorentin Labbe1-0/+2
[ Upstream commit d4c26eb6e721683a0f93e346ce55bc8dc3cbb175 ] When adding more MAC addresses to a dwmac-sun8i interface, the device goes directly in promiscuous mode. This is due to IFF_UNICAST_FLT missing flag. So since the hardware support unicast filtering, let's add IFF_UNICAST_FLT. Fixes: 9f93ac8d4085 ("net-next: stmmac: Add dwmac-sun8i") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16dpaa_eth: fix SG frame cleanupLaurentiu Tudor1-1/+1
[ Upstream commit 17170e6570c082717c142733d9a638bcd20551f8 ] Fix issue with the entry indexing in the sg frame cleanup code being off-by-1. This problem showed up when doing some basic iperf tests and manifested in traffic coming to a halt. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16bonding: fix arp_validate toggling in active-backup modeJarod Wilson1-7/+0
[ Upstream commit a9b8a2b39ce65df45687cf9ef648885c2a99fe75 ] There's currently a problem with toggling arp_validate on and off with an active-backup bond. At the moment, you can start up a bond, like so: modprobe bonding mode=1 arp_interval=100 arp_validate=0 arp_ip_targets=192.168.1.1 ip link set bond0 down echo "ens4f0" > /sys/class/net/bond0/bonding/slaves echo "ens4f1" > /sys/class/net/bond0/bonding/slaves ip link set bond0 up ip addr add 192.168.1.2/24 dev bond0 Pings to 192.168.1.1 work just fine. Now turn on arp_validate: echo 1 > /sys/class/net/bond0/bonding/arp_validate Pings to 192.168.1.1 continue to work just fine. Now when you go to turn arp_validate off again, the link falls flat on it's face: echo 0 > /sys/class/net/bond0/bonding/arp_validate dmesg ... [133191.911987] bond0: Setting arp_validate to none (0) [133194.257793] bond0: bond_should_notify_peers: slave ens4f0 [133194.258031] bond0: link status definitely down for interface ens4f0, disabling it [133194.259000] bond0: making interface ens4f1 the new active one [133197.330130] bond0: link status definitely down for interface ens4f1, disabling it [133197.331191] bond0: now running without any active interface! The problem lies in bond_options.c, where passing in arp_validate=0 results in bond->recv_probe getting set to NULL. This flies directly in the face of commit 3fe68df97c7f, which says we need to set recv_probe = bond_arp_recv, even if we're not using arp_validate. Said commit fixed this in bond_option_arp_interval_set, but missed that we can get to that same state in bond_option_arp_validate_set as well. One solution would be to universally set recv_probe = bond_arp_recv here as well, but I don't think bond_option_arp_validate_set has any business touching recv_probe at all, and that should be left to the arp_interval code, so we can just make things much tidier here. Fixes: 3fe68df97c7f ("bonding: always set recv_probe to bond_arp_rcv in arp monitor") CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16rtlwifi: rtl8723ae: Fix missing break in switch statementGustavo A. R. Silva1-0/+1
commit 84242b82d81c54e009a2aaa74d3d9eff70babf56 upstream. Add missing break statement in order to prevent the code from falling through to case 0x1025, and erroneously setting rtlhal->oem_id to RT_CID_819X_ACER when rtlefuse->eeprom_svid is equal to 0x10EC and none of the cases in switch (rtlefuse->eeprom_smid) match. This bug was found thanks to the ongoing efforts to enable -Wimplicit-fallthrough. Fixes: 238ad2ddf34b ("rtlwifi: rtl8723ae: Clean up the hardware info routine") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16mwl8k: Fix rate_idx underflowPetr Štetiar1-4/+9
commit 6b583201fa219b7b1b6aebd8966c8fd9357ef9f4 upstream. It was reported on OpenWrt bug tracking system[1], that several users are affected by the endless reboot of their routers if they configure 5GHz interface with channel 44 or 48. The reboot loop is caused by the following excessive number of WARN_ON messages: WARNING: CPU: 0 PID: 0 at backports-4.19.23-1/net/mac80211/rx.c:4516 ieee80211_rx_napi+0x1fc/0xa54 [mac80211] as the messages are being correctly emitted by the following guard: case RX_ENC_LEGACY: if (WARN_ON(status->rate_idx >= sband->n_bitrates)) as the rate_idx is in this case erroneously set to 251 (0xfb). This fix simply converts previously used magic number to proper constant and guards against substraction which is leading to the currently observed underflow. 1. https://bugs.openwrt.org/index.php?do=details&task_id=2218 Fixes: 854783444bab ("mwl8k: properly set receive status rate index on 5 GHz receive") Cc: <stable@vger.kernel.org> Tested-by: Eubert Bao <bunnier@gmail.com> Reported-by: Eubert Bao <bunnier@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16cw1200: fix missing unlock on error in cw1200_hw_scan()Wei Yongjun1-1/+4
commit 51c8d24101c79ffce3e79137e2cee5dfeb956dd7 upstream. Add the missing unlock before return from function cw1200_hw_scan() in the error handling case. Fixes: 4f68ef64cd7f ("cw1200: Fix concurrency use-after-free bugs in cw1200_hw_scan()") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16net: mvpp2: fix validate for PPv2.1Antoine Tenart1-1/+1
[ Upstream commit 8b318f30ab4ef9bbc1241e6f8c1db366dbd347f2 ] The Phylink validate function is the Marvell PPv2 driver makes a check on the GoP id. This is valid an has to be done when using PPv2.2 engines but makes no sense when using PPv2.1. The check done when using an RGMII interface makes sure the GoP id is not 0, but this breaks PPv2.1. Fixes it. Fixes: 0fb628f0f250 ("net: mvpp2: fix phylink handling of invalid PHY modes") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
2019-05-16net: vrf: Fix operation not supported when set vrf macMiaohe Lin1-0/+2
[ Upstream commit 6819e3f6d83a24777813b0d031ebe0861694db5a ] Vrf device is not able to change mac address now because lack of ndo_set_mac_address. Complete this in case some apps need to do this. Reported-by: Hui Wang <wanghui104@huawei.com> Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16spi: Micrel eth switch: declare missing of tableDaniel Gomez1-0/+9
[ Upstream commit 2f23a2a768bee7ad2ff1e9527c3f7e279e794a46 ] Add missing <of_device_id> table for SPI driver relying on SPI device match since compatible is in a DT binding or in a DTS. Before this patch: modinfo drivers/net/phy/spi_ks8995.ko | grep alias alias: spi:ksz8795 alias: spi:ksz8864 alias: spi:ks8995 After this patch: modinfo drivers/net/phy/spi_ks8995.ko | grep alias alias: spi:ksz8795 alias: spi:ksz8864 alias: spi:ks8995 alias: of:N*T*Cmicrel,ksz8795C* alias: of:N*T*Cmicrel,ksz8795 alias: of:N*T*Cmicrel,ksz8864C* alias: of:N*T*Cmicrel,ksz8864 alias: of:N*T*Cmicrel,ks8995C* alias: of:N*T*Cmicrel,ks8995 Reported-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Daniel Gomez <dagmcr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16ocelot: Don't sleep in atomic context (irqs_disabled())Claudiu Manoil1-1/+1
[ Upstream commit a8fd48b50deaa20808bbf0f6685f6f1acba6a64c ] Preemption disabled at: [<ffff000008cabd54>] dev_set_rx_mode+0x1c/0x38 Call trace: [<ffff00000808a5c0>] dump_backtrace+0x0/0x3d0 [<ffff00000808a9a4>] show_stack+0x14/0x20 [<ffff000008e6c0c0>] dump_stack+0xac/0xe4 [<ffff0000080fe76c>] ___might_sleep+0x164/0x238 [<ffff0000080fe890>] __might_sleep+0x50/0x88 [<ffff0000082261e4>] kmem_cache_alloc+0x17c/0x1d0 [<ffff000000ea0ae8>] ocelot_set_rx_mode+0x108/0x188 [mscc_ocelot_common] [<ffff000008cabcf0>] __dev_set_rx_mode+0x58/0xa0 [<ffff000008cabd5c>] dev_set_rx_mode+0x24/0x38 Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16qed: Fix the DORQ's attentions handlingDenis Bolotin2-16/+48
[ Upstream commit 0d72c2ac89185f179da1e8a91c40c82f3fa38f0b ] Separate the overflow handling from the hardware interrupt status analysis. The interrupt status is a single register and is common for all PFs. The first PF reading the register is not necessarily the one who overflowed. All PFs must check their overflow status on every attention. In this change we clear the sticky indication in the attention handler to allow doorbells to be processed again as soon as possible, but running the doorbell recovery is scheduled for the periodic handler to reduce the time spent in the attention handler. Checking the need for DORQ flush was changed to "db_bar_no_edpm" because qed_edpm_enabled()'s result could change dynamically and might have prevented a needed flush. Signed-off-by: Denis Bolotin <dbolotin@marvell.com> Signed-off-by: Michal Kalderon <mkalderon@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16qed: Fix missing DORQ attentionsDenis Bolotin3-3/+20
[ Upstream commit d4476b8a6151b2dd86c09b5acec64f66430db55d ] When the DORQ (doorbell block) is overflowed, all PFs get attentions at the same time. If one PF finished handling the attention before another PF even started, the second PF might miss the DORQ's attention bit and not handle the attention at all. If the DORQ attention is missed and the issue is not resolved, another attention will not be sent, therefore each attention is treated as a potential DORQ attention. As a result, the attention callback is called more frequently so the debug print was moved to reduce its quantity. The number of periodic doorbell recovery handler schedules was reduced because it was the previous way to mitigating the missed attention issue. Signed-off-by: Denis Bolotin <dbolotin@marvell.com> Signed-off-by: Michal Kalderon <mkalderon@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16qed: Fix the doorbell address sanity checkDenis Bolotin1-8/+8
[ Upstream commit b61b04ad81d5f975349d66abbecabf96ba211140 ] Fix the condition which verifies that doorbell address is inside the doorbell bar by checking that the end of the address is within range as well. Signed-off-by: Denis Bolotin <dbolotin@marvell.com> Signed-off-by: Michal Kalderon <mkalderon@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16qed: Delete redundant doorbell recovery typesDenis Bolotin4-51/+31
[ Upstream commit 9ac6bb1414ac0d45fe9cefbd1f5b06f0e1a3c98a ] DB_REC_DRY_RUN (running doorbell recovery without sending doorbells) is never used. DB_REC_ONCE (send a single doorbell from the doorbell recovery) is not needed anymore because by running the periodic handler we make sure we check the overflow status later instead. This patch is needed because in the next patches, the only doorbell recovery type being used is DB_REC_REAL_DEAL, and the fixes are much cleaner without this enum. Signed-off-by: Denis Bolotin <dbolotin@marvell.com> Signed-off-by: Michal Kalderon <mkalderon@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16qede: fix write to free'd pointer error and double free of ptpColin Ian King1-4/+3
[ Upstream commit 1dc2b3d65523780ed1972d446c76e62e13f3e8f5 ] The err2 error return path calls qede_ptp_disable that cleans up on an error and frees ptp. After this, the free'd ptp is dereferenced when ptp->clock is set to NULL and the code falls-through to error path err1 that frees ptp again. Fix this by calling qede_ptp_disable and exiting via an error return path that does not set ptp->clock or kfree ptp. Addresses-Coverity: ("Write to pointer after free") Fixes: 035744975aec ("qede: Add support for PTP resource locking.") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16vxge: fix return of a free'd memblock on a failed dma mappingColin Ian King1-0/+1
[ Upstream commit 0a2c34f18c94b596562bf3d019fceab998b8b584 ] Currently if a pci dma mapping failure is detected a free'd memblock address is returned rather than a NULL (that indicates an error). Fix this by ensuring NULL is returned on this error case. Addresses-Coverity: ("Use after free") Fixes: 528f727279ae ("vxge: code cleanup and reorganization") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-10net: stmmac: Use bfsize1 in ndesc_init_rx_descYueHaibing1-1/+1
commit f87db4dbd52f2f8a170a2b51cb0926221ca7c9e2 upstream. gcc warn this: drivers/net/ethernet/stmicro/stmmac/norm_desc.c: In function ndesc_init_rx_desc: drivers/net/ethernet/stmicro/stmmac/norm_desc.c:138:6: warning: variable 'bfsize1' set but not used [-Wunused-but-set-variable] Like enh_desc_init_rx_desc, we should use bfsize1 in ndesc_init_rx_desc to calculate 'p->des1' Fixes: 583e63614149 ("net: stmmac: use correct DMA buffer size in the RX descriptor") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-08libcxgb: fix incorrect ppmax calculationVarun Prakash1-1/+8
[ Upstream commit cc5a726c79158bd307150e8d4176ec79b52001ea ] BITS_TO_LONGS() uses DIV_ROUND_UP() because of this ppmax value can be greater than available per cpu page pods. This patch removes BITS_TO_LONGS() to fix this issue. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
2019-05-08net: hns: Fix WARNING when remove HNS driver with SMMU enabledYonglong Liu1-1/+3
[ Upstream commit 8601a99d7c0256b7a7fdd1ab14cf6c1f1dfcadc6 ] When enable SMMU, remove HNS driver will cause a WARNING: [ 141.924177] WARNING: CPU: 36 PID: 2708 at drivers/iommu/dma-iommu.c:443 __iommu_dma_unmap+0xc0/0xc8 [ 141.954673] Modules linked in: hns_enet_drv(-) [ 141.963615] CPU: 36 PID: 2708 Comm: rmmod Tainted: G W 5.0.0-rc1-28723-gb729c57de95c-dirty #32 [ 141.983593] Hardware name: Huawei D05/D05, BIOS Hisilicon D05 UEFI Nemo 1.8 RC0 08/31/2017 [ 142.000244] pstate: 60000005 (nZCv daif -PAN -UAO) [ 142.009886] pc : __iommu_dma_unmap+0xc0/0xc8 [ 142.018476] lr : __iommu_dma_unmap+0xc0/0xc8 [ 142.027066] sp : ffff000013533b90 [ 142.033728] x29: ffff000013533b90 x28: ffff8013e6983600 [ 142.044420] x27: 0000000000000000 x26: 0000000000000000 [ 142.055113] x25: 0000000056000000 x24: 0000000000000015 [ 142.065806] x23: 0000000000000028 x22: ffff8013e66eee68 [ 142.076499] x21: ffff8013db919800 x20: 0000ffffefbff000 [ 142.087192] x19: 0000000000001000 x18: 0000000000000007 [ 142.097885] x17: 000000000000000e x16: 0000000000000001 [ 142.108578] x15: 0000000000000019 x14: 363139343a70616d [ 142.119270] x13: 6e75656761705f67 x12: 0000000000000000 [ 142.129963] x11: 00000000ffffffff x10: 0000000000000006 [ 142.140656] x9 : 1346c1aa88093500 x8 : ffff0000114de4e0 [ 142.151349] x7 : 6662666578303d72 x6 : ffff0000105ffec8 [ 142.162042] x5 : 0000000000000000 x4 : 0000000000000000 [ 142.172734] x3 : 00000000ffffffff x2 : ffff0000114de500 [ 142.183427] x1 : 0000000000000000 x0 : 0000000000000035 [ 142.194120] Call trace: [ 142.199030] __iommu_dma_unmap+0xc0/0xc8 [ 142.206920] iommu_dma_unmap_page+0x20/0x28 [ 142.215335] __iommu_unmap_page+0x40/0x60 [ 142.223399] hnae_unmap_buffer+0x110/0x134 [ 142.231639] hnae_free_desc+0x6c/0x10c [ 142.239177] hnae_fini_ring+0x14/0x34 [ 142.246540] hnae_fini_queue+0x2c/0x40 [ 142.254080] hnae_put_handle+0x38/0xcc [ 142.261619] hns_nic_dev_remove+0x54/0xfc [hns_enet_drv] [ 142.272312] platform_drv_remove+0x24/0x64 [ 142.280552] device_release_driver_internal+0x17c/0x20c [ 142.291070] driver_detach+0x4c/0x90 [ 142.298259] bus_remove_driver+0x5c/0xd8 [ 142.306148] driver_unregister+0x2c/0x54 [ 142.314037] platform_driver_unregister+0x10/0x18 [ 142.323505] hns_nic_dev_driver_exit+0x14/0xf0c [hns_enet_drv] [ 142.335248] __arm64_sys_delete_module+0x214/0x25c [ 142.344891] el0_svc_common+0xb0/0x10c [ 142.352430] el0_svc_handler+0x24/0x80 [ 142.359968] el0_svc+0x8/0x7c0 [ 142.366104] ---[ end trace 60ad1cd58e63c407 ]--- The tx ring buffer map when xmit and unmap when xmit done. So in hnae_init_ring() did not map tx ring buffer, but in hnae_fini_ring() have a unmap operation for tx ring buffer, which is already unmapped when xmit done, than cause this WARNING. The hnae_alloc_buffers() is called in hnae_init_ring(), so the hnae_free_buffers() should be in hnae_fini_ring(), not in hnae_free_desc(). In hnae_fini_ring(), adds a check is_rx_ring() as in hnae_init_ring(). When the ring buffer is tx ring, adds a piece of code to ensure that the tx ring is unmap. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
2019-05-08net: hns: fix ICMP6 neighbor solicitation messages discard problemYonglong Liu1-6/+27
[ Upstream commit f058e46855dcbc28edb2ed4736f38a71fd19cadb ] ICMP6 neighbor solicitation messages will be discard by the Hip06 chips, because of not setting forwarding pool. Enable promisc mode has the same problem. This patch fix the wrong forwarding table configs for the multicast vague matching when enable promisc mode, and add forwarding pool for the forwarding table. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
2019-05-08net: hns: Fix probabilistic memory overwrite when HNS driver initializedYonglong Liu1-1/+1
[ Upstream commit c0b0984426814f3a9251873b689e67d34d8ccd84 ] When reboot the system again and again, may cause a memory overwrite. [ 15.638922] systemd[1]: Reached target Swap. [ 15.667561] tun: Universal TUN/TAP device driver, 1.6 [ 15.676756] Bridge firewalling registered [ 17.344135] Unable to handle kernel paging request at virtual address 0000000200000040 [ 17.352179] Mem abort info: [ 17.355007] ESR = 0x96000004 [ 17.358105] Exception class = DABT (current EL), IL = 32 bits [ 17.364112] SET = 0, FnV = 0 [ 17.367209] EA = 0, S1PTW = 0 [ 17.370393] Data abort info: [ 17.373315] ISV = 0, ISS = 0x00000004 [ 17.377206] CM = 0, WnR = 0 [ 17.380214] user pgtable: 4k pages, 48-bit VAs, pgdp = (____ptrval____) [ 17.386926] [0000000200000040] pgd=0000000000000000 [ 17.391878] Internal error: Oops: 96000004 [#1] SMP [ 17.396824] CPU: 23 PID: 95 Comm: kworker/u130:0 Tainted: G E 4.19.25-1.2.78.aarch64 #1 [ 17.414175] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.54 08/16/2018 [ 17.425615] Workqueue: events_unbound async_run_entry_fn [ 17.435151] pstate: 00000005 (nzcv daif -PAN -UAO) [ 17.444139] pc : __mutex_lock.isra.1+0x74/0x540 [ 17.453002] lr : __mutex_lock.isra.1+0x3c/0x540 [ 17.461701] sp : ffff000100d9bb60 [ 17.469146] x29: ffff000100d9bb60 x28: 0000000000000000 [ 17.478547] x27: 0000000000000000 x26: ffff802fb8945000 [ 17.488063] x25: 0000000000000000 x24: ffff802fa32081a8 [ 17.497381] x23: 0000000000000002 x22: ffff801fa2b15220 [ 17.506701] x21: ffff000009809000 x20: ffff802fa23a0888 [ 17.515980] x19: ffff801fa2b15220 x18: 0000000000000000 [ 17.525272] x17: 0000000200000000 x16: 0000000200000000 [ 17.534511] x15: 0000000000000000 x14: 0000000000000000 [ 17.543652] x13: ffff000008d95db8 x12: 000000000000000d [ 17.552780] x11: ffff000008d95d90 x10: 0000000000000b00 [ 17.561819] x9 : ffff000100d9bb90 x8 : ffff802fb89d6560 [ 17.570829] x7 : 0000000000000004 x6 : 00000004a1801d05 [ 17.579839] x5 : 0000000000000000 x4 : 0000000000000000 [ 17.588852] x3 : ffff802fb89d5a00 x2 : 0000000000000000 [ 17.597734] x1 : 0000000200000000 x0 : 0000000200000000 [ 17.606631] Process kworker/u130:0 (pid: 95, stack limit = 0x(____ptrval____)) [ 17.617438] Call trace: [ 17.623349] __mutex_lock.isra.1+0x74/0x540 [ 17.630927] __mutex_lock_slowpath+0x24/0x30 [ 17.638602] mutex_lock+0x50/0x60 [ 17.645295] drain_workqueue+0x34/0x198 [ 17.652623] __sas_drain_work+0x7c/0x168 [ 17.659903] sas_drain_work+0x60/0x68 [ 17.666947] hisi_sas_scan_finished+0x30/0x40 [hisi_sas_main] [ 17.676129] do_scsi_scan_host+0x70/0xb0 [ 17.683534] do_scan_async+0x20/0x228 [ 17.690586] async_run_entry_fn+0x4c/0x1d0 [ 17.697997] process_one_work+0x1b4/0x3f8 [ 17.705296] worker_thread+0x54/0x470 Every time the call trace is not the same, but the overwrite address is always the same: Unable to handle kernel paging request at virtual address 0000000200000040 The root cause is, when write the reg XGMAC_MAC_TX_LF_RF_CONTROL_REG, didn't use the io_base offset. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
2019-05-08net: hns: Use NAPI_POLL_WEIGHT for hns driverYonglong Liu1-5/+2
[ Upstream commit acb1ce15a61154aa501891d67ebf79bc9ea26818 ] When the HNS driver loaded, always have an error print: "netif_napi_add() called with weight 256" This is because the kernel checks the NAPI polling weights requested by drivers and it prints an error message if a driver requests a weight bigger than 64. So use NAPI_POLL_WEIGHT to fix it. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
2019-05-08net: hns: fix KASAN: use-after-free in hns_nic_net_xmit_hw()Liubin Shu1-2/+3
[ Upstream commit 3a39a12ad364a9acd1038ba8da67cd8430f30de4 ] This patch is trying to fix the issue due to: [27237.844750] BUG: KASAN: use-after-free in hns_nic_net_xmit_hw+0x708/0xa18[hns_enet_drv] After hnae_queue_xmit() in hns_nic_net_xmit_hw(), can be interrupted by interruptions, and than call hns_nic_tx_poll_one() to handle the new packets, and free the skb. So, when turn back to hns_nic_net_xmit_hw(), calling skb->len will cause use-after-free. This patch update tx ring statistics in hns_nic_tx_poll_one() to fix the bug. Signed-off-by: Liubin Shu <shuliubin@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
2019-05-08net: stmmac: don't log oversized framesAaro Koskinen1-2/+0
[ Upstream commit 057a0c5642a2ff2db7c421cdcde34294a23bf37b ] This is log is harmful as it can trigger multiple times per packet. Delete it. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
2019-05-08net: stmmac: fix dropping of multi-descriptor RX framesAaro Koskinen1-0/+5
[ Upstream commit 8ac0c24fe1c256af6644caf3d311029440ec2fbd ] Packets without the last descriptor set should be dropped early. If we receive a frame larger than the DMA buffer, the HW will continue using the next descriptor. Driver mistakes these as individual frames, and sometimes a truncated frame (without the LD set) may look like a valid packet. This fixes a strange issue where the system replies to 4098-byte ping although the MTU/DMA buffer size is set to 4096, and yet at the same time it's logging an oversized packet. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
2019-05-08net: stmmac: don't overwrite discard_frame statusAaro Koskinen1-3/+4
[ Upstream commit 1b746ce8b397e58f9e40ce5c63b7198de6930482 ] If we have error bits set, the discard_frame status will get overwritten by checksum bit checks, which might set the status back to good one. Fix by checking the COE status only if the frame is good. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
2019-05-08net: stmmac: don't stop NAPI processing when dropping a packetAaro Koskinen1-7/+7
[ Upstream commit 07b3975352374c3f5ebb4a42ef0b253fe370542d ] Currently, if we drop a packet, we exit from NAPI loop before the budget is consumed. In some situations this will make the RX processing stall e.g. when flood pinging the system with oversized packets, as the errorneous packets are not dropped efficiently. If we drop a packet, we should just continue to the next one as long as the budget allows. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
2019-05-08net: stmmac: ratelimit RX error logsAaro Koskinen1-6/+8
[ Upstream commit 972c9be784e077bc56472c78243e0326e525b689 ] Ratelimit RX error logs. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
2019-05-08net: stmmac: use correct DMA buffer size in the RX descriptorAaro Koskinen7-19/+35
[ Upstream commit 583e6361414903c5206258a30e5bd88cb03c0254 ] We always program the maximum DMA buffer size into the receive descriptor, although the allocated size may be less. E.g. with the default MTU size we allocate only 1536 bytes. If somebody sends us a bigger frame, then memory may get corrupted. Fix by using exact buffer sizes. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
2019-05-08bonding: show full hw address in sysfs for slave entriesKonstantin Khorenko1-1/+3
[ Upstream commit 18bebc6dd3281955240062655a4df35eef2c46b3 ] Bond expects ethernet hwaddr for its slave, but it can be longer than 6 bytes - infiniband interface for example. # cat /sys/devices/<skipped>/net/ib0/address 80:00:02:08:fe:80:00:00:00:00:00:00:7c:fe:90:03:00:be:5d:e1 # cat /sys/devices/<skipped>/net/ib0/bonding_slave/perm_hwaddr 80:00:02:08:fe:80 So print full hwaddr in sysfs "bonding_slave/perm_hwaddr" as well. Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
2019-05-08net/mlx5: E-Switch, Fix esw manager vport indication for more vport commandsOmri Kahalon1-4/+2
[ Upstream commit eca4a928585ac08147e5cc8e2111ecbc6279ee31 ] Traditionally, the PF (Physical Function) which resides on vport 0 was the E-switch manager. Since the ECPF (Embedded CPU Physical Function), which resides on vport 0xfffe, was introduced as the E-Switch manager, the assumption that the E-switch manager is on vport 0 is incorrect. Since the eswitch code already uses the actual vport value, all we need is to always set other_vport=1. Signed-off-by: Omri Kahalon <omrik@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
2019-05-08net/mlx5: E-Switch, Protect from invalid memory access in offload fdb tableRoi Dayan1-0/+1
[ Upstream commit 5c1d260ed10cf08dd7a0299c103ad0a3f9a9f7a1 ] The esw offloads structures share a union with the legacy mode structs. Reset the offloads struct to zero in init to protect from null assumptions made by the legacy mode code. Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
2019-05-08net: hns3: fix compile errorXi Wang2-2/+2
[ Upstream commit 669efc76b317b3aa550ffbf0b79d064cb00a5f96 ] Currently, the rules for configuring search paths in Kbuild have changed, this will lead some erros when compiling hns3 with the following command: make O=DIR M=drivers/net/ethernet/hisilicon/hns3 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c:11:10: fatal error: hnae3.h: No such file or directory This patch fix it by adding $(srctree)/ prefix to the serach paths. Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
2019-05-08i40e: fix WoL support checkStefan Assmann1-2/+1
[ Upstream commit f669d24f3dd00beab452c0fc9257f6a942ffca9b ] The current check for WoL on i40e is broken. Code comment says only magic packet is supported, so only check for that. Fixes: 540a152da762 (i40e/ixgbe/igb: fail on new WoL flag setting WAKE_MAGICSECURE) Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
2019-05-08ixgbe: fix mdio bus registrationIvan Vecera1-7/+9
[ Upstream commit 7ec52b9df7d7472240fa96223185894b1897aeb0 ] The ixgbe ignores errors returned from mdiobus_register() and leaves adapter->mii_bus non-NULL and MDIO bus state as MDIOBUS_ALLOCATED. This triggers a BUG from mdiobus_unregister() during ixgbe_remove() call. Fixes: 8fa10ef01260 ("ixgbe: register a mdiobus") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
2019-05-08igb: Fix WARN_ONCE on runtime suspendArvind Sankar2-49/+10
[ Upstream commit dabb8338be533c18f50255cf39ff4f66d4dabdbe ] The runtime_suspend device callbacks are not supposed to save configuration state or change the power state. Commit fb29f76cc566 ("igb: Fix an issue that PME is not enabled during runtime suspend") changed the driver to not save configuration state during runtime suspend, however the driver callback still put the device into a low-power state. This causes a warning in the pci pm core and results in pci_pm_runtime_suspend not calling pci_save_state or pci_finish_runtime_suspend. Fix this by not changing the power state either, leaving that to pci pm core, and make the same change for suspend callback as well. Also move a couple of defines into the appropriate header file instead of inline in the .c file. Fixes: fb29f76cc566 ("igb: Fix an issue that PME is not enabled during runtime suspend") Signed-off-by: Arvind Sankar <niveditas98@gmail.com> Reviewed-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
2019-05-08i40e: fix i40e_ptp_adjtime when given a negative deltaJacob Keller1-2/+3
[ Upstream commit b3ccbbce1e455b8454d3935eb9ae0a5f18939e24 ] Commit 0ac30ce43323 ("i40e: fix up 32 bit timespec references", 2017-07-26) claims to be cleaning up references to 32-bit timespecs. The actual contents of the commit make no sense, as it converts a call to timespec64_add into timespec64_add_ns. This would seem ok, if (a) the change was documented in the commit message, and (b) timespec64_add_ns supported negative numbers. timespec64_add_ns doesn't work with signed deltas, because the implementation is based around iter_div_u64_rem. This change resulted in a regression where i40e_ptp_adjtime would interpret small negative adjustments as large positive additions, resulting in incorrect behavior. This commit doesn't appear to fix anything, is not well explained, and introduces a bug, so lets just revert it. Reverts: 0ac30ce43323 ("i40e: fix up 32 bit timespec references", 2017-07-26) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
2019-05-08mwifiex: Make resume actually do something useful again on SDIO cardsDouglas Anderson1-1/+1
commit b82d6c1f8f8288f744a9dcc16cd3085d535decca upstream. The commit fc3a2fcaa1ba ("mwifiex: use atomic bitops to represent adapter status variables") had a fairly straightforward bug in it. It contained this bit of diff: - if (!adapter->is_suspended) { + if (test_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags)) { As you can see the patch missed the "!" when converting to the atomic bitops. This meant that the resume hasn't done anything at all since that commit landed and suspend/resume for mwifiex SDIO cards has been totally broken. After fixing this mwifiex suspend/resume appears to work again, at least with the simple testing I've done. Fixes: fc3a2fcaa1ba ("mwifiex: use atomic bitops to represent adapter status variables") Cc: <stable@vger.kernel.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-08iwlwifi: fix driver operation for 5350Emmanuel Grumbach1-1/+2
commit 5c9adef9789148d382d7d1307c3d6bfaf51d143d upstream. We introduced a bug that prevented this old device from working. The driver would simply not be able to complete the INIT flow while spewing this warning: CSR addresses aren't configured WARNING: CPU: 0 PID: 819 at drivers/net/wireless/intel/iwlwifi/pcie/drv.c:917 iwl_pci_probe+0x160/0x1e0 [iwlwifi] Cc: stable@vger.kernel.org # v4.18+ Fixes: a8cbb46f831d ("iwlwifi: allow different csr flags for different device families") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Fixes: c8f1b51e506d ("iwlwifi: allow different csr flags for different device families") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-05ath10k: Drop WARN_ON()s that always trigger during system resumeRafael J. Wysocki1-2/+2
commit 9e80ad37f6788ed52b89a3cfcd593e0aa69b216d upstream. ath10k_mac_vif_chan() always returns an error for the given vif during system-wide resume which reliably triggers two WARN_ON()s in ath10k_bss_info_changed() and they are not particularly useful in that code path, so drop them. Tested: QCA6174 hw3.2 PCI with WLAN.RM.2.0-00180-QCARMSWPZ-1 Tested: QCA6174 hw3.2 SDIO with WLAN.RMH.4.4.1-00007-QCARMSWP-1 Fixes: cd93b83ad927 ("ath10k: support for multicast rate control") Fixes: f279294e9ee2 ("ath10k: add support for configuring management packet rate") Cc: stable@vger.kernel.org Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Tested-by: Claire Chang <tientzu@chromium.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-05iwlwifi: mvm: properly check debugfs dentry before using itGreg Kroah-Hartman1-0/+5
commit 154d4899e4111ae24e68d6ba955f46856cb046bc upstream. debugfs can now report an error code if something went wrong instead of just NULL. So if the return value is to be used as a "real" dentry, it needs to be checked if it is an error before dereferencing it. This is now happening because of ff9fb72bc077 ("debugfs: return error values, not NULL"). If multiple iwlwifi devices are in the system, this can cause problems when the driver attempts to create the main debugfs directory again. Later on in the code we fail horribly by trying to dereference a pointer that is an error value. Reported-by: Laura Abbott <labbott@redhat.com> Reported-by: Gabriel Ramirez <gabriello.ramirez@gmail.com> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Intel Linux Wireless <linuxwifi@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: stable <stable@vger.kernel.org> # 5.0 Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-05bnxt_en: Fix uninitialized variable usage in bnxt_rx_pkt().Michael Chan1-4/+5
[ Upstream commit 0b397b17a4120cb80f7bf89eb30587b3dd9b0d1d ] In bnxt_rx_pkt(), if the driver encounters BD errors, it will recycle the buffers and jump to the end where the uninitailized variable "len" is referenced. Fix it by adding a new jump label that will skip the length update. This is the most correct fix since the length may not be valid when we get this type of error. Fixes: 6a8788f25625 ("bnxt_en: add support for software dynamic interrupt moderation") Reported-by: Nathan Chancellor <natechancellor@gmail.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-05bnxt_en: Fix statistics context reservation logic.Michael Chan1-8/+6
[ Upstream commit 3f93cd3f098e284c851acb89265ebe35b994a5c8 ] In an earlier commit that fixes the number of stats contexts to reserve for the RDMA driver, we added a function parameter to pass in the number of stats contexts to all the relevant functions. The passed in parameter should have been used to set the enables field of the firmware message. Fixes: 780baad44f0f ("bnxt_en: Reserve 1 stat_ctx for RDMA driver.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-05bnxt_en: Pass correct extended TX port statistics size to firmware.Michael Chan1-2/+6
[ Upstream commit ad361adf0d08f1135f3845c6b3a36be7cc0bfda5 ] If driver determines that extended TX port statistics are not supported or allocation of the data structure fails, make sure to pass 0 TX stats size to firmware to disable it. The firmware returned TX stats size should also be set to 0 for consistency. This will prevent bnxt_get_ethtool_stats() from accessing the NULL TX stats pointer in case there is mismatch between firmware and driver. Fixes: 36e53349b60b ("bnxt_en: Add additional extended port statistics.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-25 17:37:05 +0300