summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2011-10-07wl12xx: move beacon_int into wlvifEliad Peller4-9/+9
move beacon_int into the per-interface data, rather than being global. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07wl12xx: move dev_hlid into wlvifEliad Peller4-13/+11
move dev_hlid into the per-interface data, rather than being global. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07wl12xx: move some logic into wl12xx_init_vif_dataEliad Peller1-26/+40
Initialize the vif data according to the vif type Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07wl12xx: move session_counter into wlvifEliad Peller5-17/+16
move session_counter into the per-interface data, rather than being global. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07wl12xx: move ap_global_hlid and ap_bcast_hlid into wlvifEliad Peller6-41/+50
move ap_global_hlid and ap_bcast_hlid into the per-interface data, rather than being global. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07wl12xx: move sta_hlid into wlvifEliad Peller5-26/+34
move sta_hlid into the per-interface data, rather than being global. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07wl12xx: move dev_role_id into wlvifEliad Peller6-38/+49
move dev_role_id into the per-interface data, rather than being global. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07wl12xx: move role_id into wlvifEliad Peller12-200/+270
move role_id into the per-interface data, rather than being global. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07wl12xx: move aid into wlvifEliad Peller2-7/+7
move aid into the per-interface data, rather than being global. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07wl12xx: move probereq into wlvifEliad Peller3-9/+10
move probereq into the per-interface data, rather than being global. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07wl12xx: move ssid and ssid_len into wlvifEliad Peller3-19/+21
move ssid and ssid_len into the per-interface data, rather than being global. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07wl12xx: move p2p into wlvifEliad Peller2-6/+5
move p2p field into the per-interface data, rather than being global. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07wl12xx: remove set_bss_type fieldEliad Peller2-9/+0
set_bss_type is no longer evaluated, so delete it. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07wl12xx: move bss_type into wlvifEliad Peller11-101/+141
move bss_type into the per-interface data, rather than being global. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07wl12xx: replace wl->bssid with vif->bss_conf.bssidEliad Peller4-20/+11
Use the per-interface vif->bss_conf instead of the global wl->bssid. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07wl12xx: move basic_rate into wlvifEliad Peller9-52/+68
move basic_rate into the per-interface data, rather than being global. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07wl12xx: move rate_set into wlvifEliad Peller7-27/+33
move rate_set into the per-interface data, rather than being global. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07wl12xx: define wl12xx_vifEliad Peller7-57/+96
Define a per-vif data struct. This struct holds all the vif-specifc data, which is currently being hold by the global wl struct. Start by moving the basic_rate_set field into it. NOTE: in order to make the patches a bit smaller, start by using wl->vif in some functions, instead of changing all the function prototypes at once. finally, wl->vif will be removed altogether. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07wl12xx: start reworking the init sequenceEliad Peller3-148/+171
Split the init sequence into common commands (non role-specific) and role-specific commands. We still need to call the common commands only on add_interface() (rather than on start()) as the fw must get the mac address when uploading the nvs. Future patches will refactor the init sequence further more. Signed-off-by: Eliad Peller <eliad@wizery.com> [fixed a couple of sparse warnings] Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07wl12xx: replace wl->mac_addr with vif->addrEliad Peller9-44/+62
The mac address of the interface already exists in vif->addr. Use it instead of wl->mac_addr. It seems that due to some fw bug, we still need to set nvs->mac to the actual mac addresss, otherwise the fw doesn't function well (e.g. can't get dhcp address). Thus, use wl->mac_addr for this purpose, and don't delete it yet. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07wl12xx: disable AP-mode-specific quirksEliad Peller4-22/+0
The current wl12xx fw (7.3.0.0.77) supports both STA and AP mode, and we no longer use AP-mode-specific quirks. WL12XX_QUIRK_END_OF_TRANSACTION is still used for certain HWs, while WL12XX_QUIRK_LPD_MODE is not used anymore. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07wl12xx: Add support for HW channel switchShahar Levi6-1/+133
The wl12xx FW supports HW channel switch. If we don't use it, sometimes the firmware gets confused when recalibrating to the new channel, causing RX problems. This commit adds HW channel switch support by implementing the channell_switch op. Signed-off-by: Shahar Levi <shahar_levi@ti.com> [added one comment, remove the tx_flush and rephrased the commit message] Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07wl12xx: set max_sched_scan_ie_len correctlyLuciano Coelho1-0/+3
The wiphy max_sched_scan_ie_len attribute was not set correctly and remained as 0, so when IEs were being passed in a scheduled scan, we were returning -EINVAL. Fix this by setting the attribute properly. Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07wl12xx: configure rate policy for p2p operationsEliad Peller3-1/+22
p2p packets should go out only with OFDM rates. Configure a new rate policy that will (later) be used during p2p_find (when the p2p_cli / p2p_go interfaces are in use, we won't have to use this policy, as the configured rates should already be OFDM-only). Additionally, update CONF_TX_MAX_RATE_CLASSES to reflect the current value from the fw api. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-03ath9k_hw: set pci_express capability true for AR9480Mohammed Shafi Shajakhan1-1/+6
the AR_SREV register does not seems to indicate whether AR9480 is pci_express capable or not though the other information like macVersion etc can be obtained properly. this fix is essential as ASPM won't be intialized and its related driver functionality ath9k_hw_configpcipowersave won't be called Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-03ath9k_hw: Fix number of GPIO pins for AR9287/9300Mohammed Shafi Shajakhan1-0/+4
this patch fixes the assumption of maximum number of GPIO pins present in AR9287/AR9300. this fix is essential as we might encounter some functionality issues involved in accessing the status of GPIO pins which are all incorrectly assumed to be not within the range of max_num_gpio of AR9300/AR9287 chipsets Cc: stable@kernel.org Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-03libertas: detect TX lockups and reset hardwareDaniel Drake2-0/+36
Recent patches added support for resetting the SD8686 hardware when commands time out, which seems to happen quite frequently soon after resuming the system from a Wake-on-WLAN-triggered resume. At http://dev.laptop.org/ticket/10969 we see the same thing happen with transmits. In this case, the hardware will fail to respond to a frame passed for transmission, and libertas (correctly) will block all further commands and transmissions as the hardware can only deal with one thing at a time. This results in a lockup while the system waits indefinitely for the dead card to respond. Hook up a TX lockup timer to detect this and reset the hardware. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-03mac80211: pass vif param to conf_tx() callbackEliad Peller24-30/+53
tx params should be configured per interface. add ieee80211_vif param to the conf_tx callback, and change all the drivers that use this callback. The following spatch was used: @rule1@ struct ieee80211_ops ops; identifier conf_tx_op; @@ ops.conf_tx = conf_tx_op; @rule2@ identifier rule1.conf_tx_op; identifier hw, queue, params; @@ conf_tx_op ( - struct ieee80211_hw *hw, + struct ieee80211_hw *hw, struct ieee80211_vif *vif, u16 queue, const struct ieee80211_tx_queue_params *params) {...} Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-03iwlagn: rename iwlagn module iwlwifi and alias to iwlagn.Don Fry5-33/+34
Rename the iwlagn module as iwlwifi in preparation for future changes. Add an alias to iwlagn for backward compatibility. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-03ath9k_hw: extend GPIO pin select mask for rfkillMohammed Shafi Shajakhan1-6/+1
this extends the bits for rf kill GPIO selection to [7:2] from [4:2] as we use GPIO pin 11 as rfkill for AR9480 and also remove few unused macros Cc: Wilson Tsao <wtsao@qca.qualcomm.com> Cc: "Hu, Russell" <rhu@qca.qualcomm.com> Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-03mwifiex: handle an error path correctlyAmitkumar Karwar1-4/+1
In failure case locks are not allocated in mwifiex_register(). So mwifiex_free_lock_list() routine call becomes redundant. Also we don't need to check return type for mwifiex_init_lock_list() routine. It never fails. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-03mwifiex: correct AMSDU aggregation checkAmitkumar Karwar4-11/+25
The commit "mwifiex: remove list traversal.."(fcf2176c87..) wrongly modifies AMSDU aggregation check. Due to this even though packet size for iperf traffic is already large, we unnecessarily try to aggregate them which adds some delay. If Tx iperf is started on UUT for 30 seconds, UUT keeps sending Tx packets for few more seconds. That commit is reverted to fix the problem. Also, MIN_NUM_AMSDU check is moved inside the loop to optimize the loop. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-03ath9k_htc: add AVM FRITZ!WLAN 11N v2 supportLuis R. Rodriguez1-0/+1
This was reported and tested by Martin Walter over at AVM GmbH Berlin. This also applies to 3.0.1 so sendint to stable. Cc: s.kirste@avm.de Cc: d.friedel@avm.de Cc: Martin Walter <m.walter@avm.de> Cc: Peter Grabienski <pgrabien@qca.qualcomm.com> Cc: stable@kernel.org Tested-by: Martin Walter <m.walter@avm.de> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-03Merge branch 'for-linville' of git://github.com/kvalo/ath6klJohn W. Linville21-1549/+4050
2011-10-03ath6kl: include vmalloc.h in debug.cKalle Valo1-0/+1
Fixes compilation errors when compiling for ARM: ath6kl/debug.c:312: error: implicit declaration of function 'vmalloc' ath6kl/debug.c:312: warning: assignment makes pointer from integer without a cast ath6kl/debug.c:342: error: implicit declaration of function 'vfree' ath6kl/debug.c:696: warning: assignment makes pointer from integer without a cast ath6kl/debug.c:871: warning: assignment makes pointer from integer without a cast Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-10-01ath6kl: fix size_t related warningsKalle Valo1-7/+7
My earlier debug log additions added these warnings when compiling 64 bit kernels: ath6kl/init.c:962: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' ath6kl/init.c:975: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' ath6kl/init.c:988: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' ath6kl/init.c:1009: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' ath6kl/init.c:1192: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' ath6kl/init.c:1236: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' ath6kl/init.c:1267: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' Reported-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-09-30mac80211: implement uAPSDJohannes Berg3-3/+3
Add uAPSD support to mac80211. This is probably not possible with all devices, so advertising it with the cfg80211 flag will be left up to drivers that want it. Due to my previous patches it is now a fairly straight-forward extension. Drivers need to have accurate TX status reporting for the EOSP frame. For drivers that buffer themselves, the provided APIs allow releasing the right number of frames, but then drivers need to set EOSP and more-data themselves. This is documented in more detail in the new code itself. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mac80211: let drivers inform it about per TID buffered framesJohannes Berg3-10/+10
For uAPSD implementation, it is necessary to know on which ACs frames are buffered. mac80211 obviously knows about the frames it has buffered itself, but with aggregation many drivers buffer frames. Thus, mac80211 needs to be informed about this. For now, since we don't have APSD in any form, this will unconditionally set the TIM bit for the station but later with uAPSD only some ACs might cause the TIM bit to be set. ath9k is the only driver using this API and I only modify it in the most basic way, it won't be able to implement uAPSD with this yet. But it can't do that anyway since there's no way to selectively release frames to the peer yet. Since drivers will buffer frames per TID, let them inform mac80211 on a per TID basis, mac80211 will then sort out the AC mapping itself. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30iwlagn: iwl-agn-rs: remove unnecessary null check for sta and lq_staGreg Dietsche1-3/+0
both sta and lq_sta are guaranteed to be not null in the calling function so we don't need to check them here. Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30ath9k/ath9k_htc: Fix PS wrappers for RF killMohammed Shafi Shajakhan2-3/+14
ath9k_hw_gpio_get reads the GPIO in/out registers to get the status of GPIO pins, so use PS wrappers Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30rtlwifi: Remove unused _usb_nbytes_read_write and _usb_writeN_syncLarry Finger2-34/+2
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30rtlwifi: Remove unused routine _usb_readN_syncLarry Finger2-12/+0
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mwifiex: add cfg80211 handlers add/del_virtual_intfYogesh Ashok Powar6-243/+207
Making adding and deleting virtual interfaces dynamic. Adding handlers for creating and deleting virtual interface with given name and dev respectively. Also, creating default interface of type station on insmod of the driver. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mwifiex: fix Tx data rate display issueAmitkumar Karwar1-1/+17
"iw dev mlan0 link" shows wrong data rate, because data rate is not sent properly to cfg80211 stack. Also stack is not updated with mcs and Tx data flags information. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mwifiex: remove unreachable codeAmitkumar Karwar1-44/+2
In disconnected state "iw dev mlan0 link" command will return from cfg80211 stack itself. We also have an error check in mwifiex_cfg80211_get_station() routine. Therefore the code under "if (!priv->media_connected)" condition in mwifiex_rate_ioctl_get_rate_value() routine becomes unreachable. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mwifiex: remove unnecessary mwifiex_dump_station_info() callAmitkumar Karwar1-2/+0
An extra call to mwifiex_dump_station_info() routine in get_station callback function is redundant Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30ath9k: Remove redundant my beacon check at ath_rx_ps_beaconRajkumar Manoharan1-17/+6
Make use of the rx status's is_mybeacon in order to avoid redundant memcmp. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30ath9k: Remove unnecessary AMPDU check at tx statusRajkumar Manoharan2-9/+2
Fill the ampdu_[ack]_len for both aggregation and normal frames. So that we could avoid unnecesary conditional at tx status. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30wireless: at76c50x: use native hex_pack_byte() methodAndy Shevchenko1-10/+8
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: "John W. Linville" <linville@tuxdriver.com> Tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-28wireless/ath6kl: use of module_param requires the inclusion of moduleparam.hStephen Rothwell1-0/+1
Otheriwse the module.h split up fails like this: drivers/net/wireless/ath/ath6kl/init.c:27:26: error: expected ')' before 'uint' Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-04 10:50:51 +0300