summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2020-10-17drivers/net/ethernet/marvell/mvmdio.c: Fix non OF caseArnaud Patard1-6/+16
commit d934423ac26ed373dfe089734d505dca5ff679b6 upstream. Orion5.x systems are still using machine files and not device-tree. Commit 96cb4342382290c9 ("net: mvmdio: allow up to three clocks to be specified for orion-mdio") has replaced devm_clk_get() with of_clk_get(), leading to a oops at boot and not working network, as reported in https://lists.debian.org/debian-arm/2019/07/msg00088.html and possibly in https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=908712. Link: https://lists.debian.org/debian-arm/2019/07/msg00088.html Fixes: 96cb4342382290c9 ("net: mvmdio: allow up to three clocks to be specified for orion-mdio") Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-14net: usb: rtl8150: set random MAC address when set_ethernet_addr() failsAnant Thazhemadam1-4/+12
commit f45a4248ea4cc13ed50618ff066849f9587226b2 upstream. When get_registers() fails in set_ethernet_addr(),the uninitialized value of node_id gets copied over as the address. So, check the return value of get_registers(). If get_registers() executed successfully (i.e., it returns sizeof(node_id)), copy over the MAC address using ether_addr_copy() (instead of using memcpy()). Else, if get_registers() failed instead, a randomly generated MAC address is set as the MAC address instead. Reported-by: syzbot+abbc768b560c84d92fd3@syzkaller.appspotmail.com Tested-by: syzbot+abbc768b560c84d92fd3@syzkaller.appspotmail.com Acked-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-14net/mlx5e: Fix VLAN create flowAya Levin1-2/+4
[ Upstream commit d4a16052bccdd695982f89d815ca075825115821 ] When interface is attached while in promiscuous mode and with VLAN filtering turned off, both configurations are not respected and VLAN filtering is performed. There are 2 flows which add the any-vid rules during interface attach: VLAN creation table and set rx mode. Each is relaying on the other to add any-vid rules, eventually non of them does. Fix this by adding any-vid rules on VLAN creation regardless of promiscuous mode. Fixes: 9df30601c843 ("net/mlx5e: Restore vlan filter after seamless reset") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-14net/mlx5e: Fix VLAN cleanup flowAya Levin1-2/+6
[ Upstream commit 8c7353b6f716436ad0bfda2b5c5524ab2dde5894 ] Prior to this patch unloading an interface in promiscuous mode with RX VLAN filtering feature turned off - resulted in a warning. This is due to a wrong condition in the VLAN rules cleanup flow, which left the any-vid rules in the VLAN steering table. These rules prevented destroying the flow group and the flow table. The any-vid rules are removed in 2 flows, but none of them remove it in case both promiscuous is set and VLAN filtering is off. Fix the issue by changing the condition of the VLAN table cleanup flow to clean also in case of promiscuous mode. mlx5_core 0000:00:08.0: mlx5_destroy_flow_group:2123:(pid 28729): Flow group 20 wasn't destroyed, refcount > 1 mlx5_core 0000:00:08.0: mlx5_destroy_flow_group:2123:(pid 28729): Flow group 19 wasn't destroyed, refcount > 1 mlx5_core 0000:00:08.0: mlx5_destroy_flow_table:2112:(pid 28729): Flow table 262149 wasn't destroyed, refcount > 1 ... ... ------------[ cut here ]------------ FW pages counter is 11560 after reclaiming all pages WARNING: CPU: 1 PID: 28729 at drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:660 mlx5_reclaim_startup_pages+0x178/0x230 [mlx5_core] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: mlx5_function_teardown+0x2f/0x90 [mlx5_core] mlx5_unload_one+0x71/0x110 [mlx5_core] remove_one+0x44/0x80 [mlx5_core] pci_device_remove+0x3e/0xc0 device_release_driver_internal+0xfb/0x1c0 device_release_driver+0x12/0x20 pci_stop_bus_device+0x68/0x90 pci_stop_and_remove_bus_device+0x12/0x20 hv_eject_device_work+0x6f/0x170 [pci_hyperv] ? __schedule+0x349/0x790 process_one_work+0x206/0x400 worker_thread+0x34/0x3f0 ? process_one_work+0x400/0x400 kthread+0x126/0x140 ? kthread_park+0x90/0x90 ret_from_fork+0x22/0x30 ---[ end trace 6283bde8d26170dc ]--- Fixes: 9df30601c843 ("net/mlx5e: Restore vlan filter after seamless reset") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-14net: usb: ax88179_178a: fix missing stop entry in driver_infoWilken Gottwalt1-0/+1
[ Upstream commit 9666ea66a74adfe295cb3a8760c76e1ef70f9caf ] Adds the missing .stop entry in the Belkin driver_info structure. Fixes: e20bd60bf62a ("net: usb: asix88179_178a: Add support for the Belkin B2B128") Signed-off-by: Wilken Gottwalt <wilken.gottwalt@mailbox.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-14mdio: fix mdio-thunder.c dependency & build errorRandy Dunlap1-0/+1
[ Upstream commit 7dbbcf496f2a4b6d82cfc7810a0746e160b79762 ] Fix build error by selecting MDIO_DEVRES for MDIO_THUNDER. Fixes this build error: ld: drivers/net/phy/mdio-thunder.o: in function `thunder_mdiobus_pci_probe': drivers/net/phy/mdio-thunder.c:78: undefined reference to `devm_mdiobus_alloc_size' Fixes: 379d7ac7ca31 ("phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: netdev@vger.kernel.org Cc: David Daney <david.daney@cavium.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-14bonding: set dev->needed_headroom in bond_setup_by_slave()Eric Dumazet1-0/+1
[ Upstream commit f32f19339596b214c208c0dba716f4b6cc4f6958 ] syzbot managed to crash a host by creating a bond with a GRE device. For non Ethernet device, bonding calls bond_setup_by_slave() instead of ether_setup(), and unfortunately dev->needed_headroom was not copied from the new added member. [ 171.243095] skbuff: skb_under_panic: text:ffffffffa184b9ea len:116 put:20 head:ffff883f84012dc0 data:ffff883f84012dbc tail:0x70 end:0xd00 dev:bond0 [ 171.243111] ------------[ cut here ]------------ [ 171.243112] kernel BUG at net/core/skbuff.c:112! [ 171.243117] invalid opcode: 0000 [#1] SMP KASAN PTI [ 171.243469] gsmi: Log Shutdown Reason 0x03 [ 171.243505] Call Trace: [ 171.243506] <IRQ> [ 171.243512] [<ffffffffa171be59>] skb_push+0x49/0x50 [ 171.243516] [<ffffffffa184b9ea>] ipgre_header+0x2a/0xf0 [ 171.243520] [<ffffffffa17452d7>] neigh_connected_output+0xb7/0x100 [ 171.243524] [<ffffffffa186f1d3>] ip6_finish_output2+0x383/0x490 [ 171.243528] [<ffffffffa186ede2>] __ip6_finish_output+0xa2/0x110 [ 171.243531] [<ffffffffa186acbc>] ip6_finish_output+0x2c/0xa0 [ 171.243534] [<ffffffffa186abe9>] ip6_output+0x69/0x110 [ 171.243537] [<ffffffffa186ac90>] ? ip6_output+0x110/0x110 [ 171.243541] [<ffffffffa189d952>] mld_sendpack+0x1b2/0x2d0 [ 171.243544] [<ffffffffa189d290>] ? mld_send_report+0xf0/0xf0 [ 171.243548] [<ffffffffa189c797>] mld_ifc_timer_expire+0x2d7/0x3b0 [ 171.243551] [<ffffffffa189c4c0>] ? mld_gq_timer_expire+0x50/0x50 [ 171.243556] [<ffffffffa0fea270>] call_timer_fn+0x30/0x130 [ 171.243559] [<ffffffffa0fea17c>] expire_timers+0x4c/0x110 [ 171.243563] [<ffffffffa0fea0e3>] __run_timers+0x213/0x260 [ 171.243566] [<ffffffffa0fecb7d>] ? ktime_get+0x3d/0xa0 [ 171.243570] [<ffffffffa0ff9c4e>] ? clockevents_program_event+0x7e/0xe0 [ 171.243574] [<ffffffffa0f7e5d5>] ? sched_clock_cpu+0x15/0x190 [ 171.243577] [<ffffffffa0fe973d>] run_timer_softirq+0x1d/0x40 [ 171.243581] [<ffffffffa1c00152>] __do_softirq+0x152/0x2f0 [ 171.243585] [<ffffffffa0f44e1f>] irq_exit+0x9f/0xb0 [ 171.243588] [<ffffffffa1a02e1d>] smp_apic_timer_interrupt+0xfd/0x1a0 [ 171.243591] [<ffffffffa1a01ea6>] apic_timer_interrupt+0x86/0x90 Fixes: f5184d267c1a ("net: Allow netdevices to specify needed head/tailroom") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-14net: stmmac: removed enabling eee in EEE set callbackVoon Weifeng1-11/+4
[ Upstream commit 7241c5a697479c7d0c5a96595822cdab750d41ae ] EEE should be only be enabled during stmmac_mac_link_up() when the link are up and being set up properly. set_eee should only do settings configuration and disabling the eee. Without this fix, turning on EEE using ethtool will return "Operation not supported". This is due to the driver is in a dead loop waiting for eee to be advertised in the for eee to be activated but the driver will only configure the EEE advertisement after the eee is activated. Ethtool should only return "Operation not supported" if there is no EEE capbility in the MAC controller. Fixes: 8a7493e58ad6 ("net: stmmac: Fix a race in EEE enable callback") Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Acked-by: Mark Gross <mgross@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-14net: team: fix memory leak in __team_options_registerAnant Thazhemadam1-1/+1
commit 9a9e77495958c7382b2438bc19746dd3aaaabb8e upstream. The variable "i" isn't initialized back correctly after the first loop under the label inst_rollback gets executed. The value of "i" is assigned to be option_count - 1, and the ensuing loop (under alloc_rollback) begins by initializing i--. Thus, the value of i when the loop begins execution will now become i = option_count - 2. Thus, when kfree(dst_opts[i]) is called in the second loop in this order, (i.e., inst_rollback followed by alloc_rollback), dst_optsp[option_count - 2] is the first element freed, and dst_opts[option_count - 1] does not get freed, and thus, a memory leak is caused. This memory leak can be fixed, by assigning i = option_count (instead of option_count - 1). Fixes: 80f7c6683fe0 ("team: add support for per-port options") Reported-by: syzbot+69b804437cfec30deac3@syzkaller.appspotmail.com Tested-by: syzbot+69b804437cfec30deac3@syzkaller.appspotmail.com Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-14team: set dev->needed_headroom in team_setup_by_port()Eric Dumazet1-0/+1
commit 89d01748b2354e210b5d4ea47bc25a42a1b42c82 upstream. Some devices set needed_headroom. If we ignore it, we might end up crashing in various skb_push() for example in ipgre_header() since some layers assume enough headroom has been reserved. Fixes: 1d76efe1577b ("team: add support for non-ethernet devices") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-14macsec: avoid use-after-free in macsec_handle_frame()Eric Dumazet1-1/+3
commit c7cc9200e9b4a2ac172e990ef1975cd42975dad6 upstream. De-referencing skb after call to gro_cells_receive() is not allowed. We need to fetch skb->len earlier. Fixes: 5491e7c6b1a9 ("macsec: enable GRO and RPS on macsec devices") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-14Revert "ravb: Fixed to be able to unload modules"Geert Uytterhoeven1-55/+55
commit 77972b55fb9d35d4a6b0abca99abffaa4ec6a85b upstream. This reverts commit 1838d6c62f57836639bd3d83e7855e0ee4f6defc. This commit moved the ravb_mdio_init() call (and thus the of_mdiobus_register() call) from the ravb_probe() to the ravb_open() call. This causes a regression during system resume (s2idle/s2ram), as new PHY devices cannot be bound while suspended. During boot, the Micrel PHY is detected like this: Micrel KSZ9031 Gigabit PHY e6800000.ethernet-ffffffff:00: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=e6800000.ethernet-ffffffff:00, irq=228) ravb e6800000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off During system suspend, (A) defer_all_probes is set to true, and (B) usermodehelper_disabled is set to UMH_DISABLED, to avoid drivers being probed while suspended. A. If CONFIG_MODULES=n, phy_device_register() calling device_add() merely adds the device, but does not probe it yet, as really_probe() returns early due to defer_all_probes being set: dpm_resume+0x128/0x4f8 device_resume+0xcc/0x1b0 dpm_run_callback+0x74/0x340 ravb_resume+0x190/0x1b8 ravb_open+0x84/0x770 of_mdiobus_register+0x1e0/0x468 of_mdiobus_register_phy+0x1b8/0x250 of_mdiobus_phy_device_register+0x178/0x1e8 phy_device_register+0x114/0x1b8 device_add+0x3d4/0x798 bus_probe_device+0x98/0xa0 device_initial_probe+0x10/0x18 __device_attach+0xe4/0x140 bus_for_each_drv+0x64/0xc8 __device_attach_driver+0xb8/0xe0 driver_probe_device.part.11+0xc4/0xd8 really_probe+0x32c/0x3b8 Later, phy_attach_direct() notices no PHY driver has been bound, and falls back to the Generic PHY, leading to degraded operation: Generic PHY e6800000.ethernet-ffffffff:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e6800000.ethernet-ffffffff:00, irq=POLL) ravb e6800000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off B. If CONFIG_MODULES=y, request_module() returns early with -EBUSY due to UMH_DISABLED, and MDIO initialization fails completely: mdio_bus e6800000.ethernet-ffffffff:00: error -16 loading PHY driver module for ID 0x00221622 ravb e6800000.ethernet eth0: failed to initialize MDIO PM: dpm_run_callback(): ravb_resume+0x0/0x1b8 returns -16 PM: Device e6800000.ethernet failed to resume: error -16 Ignoring -EBUSY in phy_request_driver_module(), like was done for -ENOENT in commit 21e194425abd65b5 ("net: phy: fix issue with loading PHY driver w/o initramfs"), would makes it fall back to the Generic PHY, like in the CONFIG_MODULES=n case. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07drivers/net/wan/hdlc: Set skb->protocol before transmittingXie He3-0/+5
[ Upstream commit 9fb030a70431a2a2a1b292dbf0b2f399cc072c16 ] This patch sets skb->protocol before transmitting frames on the HDLC device, so that a user listening on the HDLC device with an AF_PACKET socket will see outgoing frames' sll_protocol field correctly set and consistent with that of incoming frames. 1. Control frames in hdlc_cisco and hdlc_ppp When these drivers send control frames, skb->protocol is not set. This value should be set to htons(ETH_P_HDLC), because when receiving control frames, their skb->protocol is set to htons(ETH_P_HDLC). When receiving, hdlc_type_trans in hdlc.h is called, which then calls cisco_type_trans or ppp_type_trans. The skb->protocol of control frames is set to htons(ETH_P_HDLC) so that the control frames can be received by hdlc_rcv in hdlc.c, which calls cisco_rx or ppp_rx to process the control frames. 2. hdlc_fr When this driver sends control frames, skb->protocol is set to internal values used in this driver. When this driver sends data frames (from upper stacked PVC devices), skb->protocol is the same as that of the user data packet being sent on the upper PVC device (for normal PVC devices), or is htons(ETH_P_802_3) (for Ethernet-emulating PVC devices). However, skb->protocol for both control frames and data frames should be set to htons(ETH_P_HDLC), because when receiving, all frames received on the HDLC device will have their skb->protocol set to htons(ETH_P_HDLC). When receiving, hdlc_type_trans in hdlc.h is called, and because this driver doesn't provide a type_trans function in struct hdlc_proto, all frames will have their skb->protocol set to htons(ETH_P_HDLC). The frames are then received by hdlc_rcv in hdlc.c, which calls fr_rx to process the frames (control frames are consumed and data frames are re-received on upper PVC devices). Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-07drivers/net/wan/lapbether: Make skb->protocol consistent with the headerXie He1-2/+2
[ Upstream commit 83f9a9c8c1edc222846dc1bde6e3479703e8e5a3 ] This driver is a virtual driver stacked on top of Ethernet interfaces. When this driver transmits data on the Ethernet device, the skb->protocol setting is inconsistent with the Ethernet header prepended to the skb. This causes a user listening on the Ethernet interface with an AF_PACKET socket, to see different sll_protocol values for incoming and outgoing frames, because incoming frames would have this value set by parsing the Ethernet header. This patch changes the skb->protocol value for outgoing Ethernet frames, making it consistent with the Ethernet header prepended. This makes a user listening on the Ethernet device with an AF_PACKET socket, to see the same sll_protocol value for incoming and outgoing frames. Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-07rndis_host: increase sleep time in the query-response loopOlympia Giannou1-1/+1
[ Upstream commit 4202c9fdf03d79dedaa94b2c4cf574f25793d669 ] Some WinCE devices face connectivity issues via the NDIS interface. They fail to register, resulting in -110 timeout errors and failures during the probe procedure. In this kind of WinCE devices, the Windows-side ndis driver needs quite more time to be loaded and configured, so that the linux rndis host queries to them fail to be responded correctly on time. More specifically, when INIT is called on the WinCE side - no other requests can be served by the Client and this results in a failed QUERY afterwards. The increase of the waiting time on the side of the linux rndis host in the command-response loop leaves the INIT process to complete and respond to a QUERY, which comes afterwards. The WinCE devices with this special "feature" in their ndis driver are satisfied by this fix. Signed-off-by: Olympia Giannou <olympia.giannou@leica-geosystems.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-07net: dec: de2104x: Increase receive ring size for TulipLucy Yan1-1/+1
[ Upstream commit ee460417d254d941dfea5fb7cff841f589643992 ] Increase Rx ring size to address issue where hardware is reaching the receive work limit. Before: [ 102.223342] de2104x 0000:17:00.0 eth0: rx work limit reached [ 102.245695] de2104x 0000:17:00.0 eth0: rx work limit reached [ 102.251387] de2104x 0000:17:00.0 eth0: rx work limit reached [ 102.267444] de2104x 0000:17:00.0 eth0: rx work limit reached Signed-off-by: Lucy Yan <lucyyan@google.com> Reviewed-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-07drivers/net/wan/hdlc_fr: Add needed_headroom for PVC devicesXie He1-1/+2
[ Upstream commit 44a049c42681de71c783d75cd6e56b4e339488b0 ] PVC devices are virtual devices in this driver stacked on top of the actual HDLC device. They are the devices normal users would use. PVC devices have two types: normal PVC devices and Ethernet-emulating PVC devices. When transmitting data with PVC devices, the ndo_start_xmit function will prepend a header of 4 or 10 bytes. Currently this driver requests this headroom to be reserved for normal PVC devices by setting their hard_header_len to 10. However, this does not work when these devices are used with AF_PACKET/RAW sockets. Also, this driver does not request this headroom for Ethernet-emulating PVC devices (but deals with this problem by reallocating the skb when needed, which is not optimal). This patch replaces hard_header_len with needed_headroom, and set needed_headroom for Ethernet-emulating PVC devices, too. This makes the driver to request headroom for all PVC devices in all cases. Cc: Krzysztof Halasa <khc@pm.waw.pl> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01net: qed: RDMA personality shouldn't fail VF loadDmitry Bogdanov1-0/+1
[ Upstream commit ce1cf9e5025f4e2d2198728391f1847b3e168bc6 ] Fix the assert during VF driver installation when the personality is iWARP Fixes: 1fe614d10f45 ("qed: Relax VF firmware requirements") Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01mwifiex: Increase AES key storage size to 256 bitsMaximilian Luz2-3/+3
[ Upstream commit 4afc850e2e9e781976fb2c7852ce7bac374af938 ] Following commit e18696786548 ("mwifiex: Prevent memory corruption handling keys") the mwifiex driver fails to authenticate with certain networks, specifically networks with 256 bit keys, and repeatedly asks for the password. The kernel log repeats the following lines (id and bssid redacted): mwifiex_pcie 0000:01:00.0: info: trying to associate to '<id>' bssid <bssid> mwifiex_pcie 0000:01:00.0: info: associated to bssid <bssid> successfully mwifiex_pcie 0000:01:00.0: crypto keys added mwifiex_pcie 0000:01:00.0: info: successfully disconnected from <bssid>: reason code 3 Tracking down this problem lead to the overflow check introduced by the aforementioned commit into mwifiex_ret_802_11_key_material_v2(). This check fails on networks with 256 bit keys due to the current storage size for AES keys in struct mwifiex_aes_param being only 128 bit. To fix this issue, increase the storage size for AES keys to 256 bit. Fixes: e18696786548 ("mwifiex: Prevent memory corruption handling keys") Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Reported-by: Kaloyan Nikolov <konik98@gmail.com> Tested-by: Kaloyan Nikolov <konik98@gmail.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200825153829.38043-1-luzmaximilian@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01ieee802154/adf7242: check status of adf7242_read_regTom Rix1-1/+3
[ Upstream commit e3914ed6cf44bfe1f169e26241f8314556fd1ac1 ] Clang static analysis reports this error adf7242.c:887:6: warning: Assigned value is garbage or undefined len = len_u8; ^ ~~~~~~ len_u8 is set in adf7242_read_reg(lp, 0, &len_u8); When this call fails, len_u8 is not set. So check the return code. Fixes: 7302b9d90117 ("ieee802154/adf7242: Driver for ADF7242 MAC IEEE802154") Signed-off-by: Tom Rix <trix@redhat.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Link: https://lore.kernel.org/r/20200802142339.21091-1-trix@redhat.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01ieee802154: fix one possible memleak in ca8210_dev_com_initLiu Jian1-0/+1
[ Upstream commit 88f46b3fe2ac41c381770ebad9f2ee49346b57a2 ] We should call destroy_workqueue to destroy mlme_workqueue in error branch. Fixes: ded845a781a5 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver") Signed-off-by: Liu Jian <liujian56@huawei.com> Link: https://lore.kernel.org/r/20200720143315.40523-1-liujian56@huawei.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01wlcore: fix runtime pm imbalance in wlcore_regdomain_configDinghao Liu1-1/+3
[ Upstream commit 282a04bf1d8029eb98585cb5db3fd70fe8bc91f7 ] pm_runtime_get_sync() increments the runtime PM usage counter even the call returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200520124649.10848-1-dinghao.liu@zju.edu.cn Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01wlcore: fix runtime pm imbalance in wl1271_tx_workDinghao Liu1-0/+1
[ Upstream commit 9604617e998b49f7695fea1479ed82421ef8c9f0 ] There are two error handling paths in this functon. When wlcore_tx_work_locked() returns an error code, we should decrease the runtime PM usage counter the same way as the error handling path beginning from pm_runtime_get_sync(). Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200520124241.9931-1-dinghao.liu@zju.edu.cn Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01e1000: Do not perform reset in reset_task if we are already downAlexander Duyck1-4/+14
[ Upstream commit 49ee3c2ab5234757bfb56a0b3a3cb422f427e3a3 ] We are seeing a deadlock in e1000 down when NAPI is being disabled. Looking over the kernel function trace of the system it appears that the interface is being closed and then a reset is hitting which deadlocks the interface as the NAPI interface is already disabled. To prevent this from happening I am disabling the reset task when __E1000_DOWN is already set. In addition code has been added so that we set the __E1000_DOWN while holding the __E1000_RESET flag in e1000_close in order to guarantee that the reset task will not run after we have started the close call. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Tested-by: Maxim Zhukov <mussitantesmortem@gmail.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01ath10k: use kzalloc to read for ath10k_sdio_hif_diag_readWen Gong1-4/+14
[ Upstream commit 402f2992b4d62760cce7c689ff216ea3bf4d6e8a ] When use command to read values, it crashed. command: dd if=/sys/kernel/debug/ieee80211/phy0/ath10k/mem_value count=1 bs=4 skip=$((0x100233)) It will call to ath10k_sdio_hif_diag_read with address = 0x4008cc and buf_len = 4. Then system crash: [ 1786.013258] Unable to handle kernel paging request at virtual address ffffffc00bd45000 [ 1786.013273] Mem abort info: [ 1786.013281] ESR = 0x96000045 [ 1786.013291] Exception class = DABT (current EL), IL = 32 bits [ 1786.013299] SET = 0, FnV = 0 [ 1786.013307] EA = 0, S1PTW = 0 [ 1786.013314] Data abort info: [ 1786.013322] ISV = 0, ISS = 0x00000045 [ 1786.013330] CM = 0, WnR = 1 [ 1786.013342] swapper pgtable: 4k pages, 39-bit VAs, pgdp = 000000008542a60e [ 1786.013350] [ffffffc00bd45000] pgd=0000000000000000, pud=0000000000000000 [ 1786.013368] Internal error: Oops: 96000045 [#1] PREEMPT SMP [ 1786.013609] Process swapper/0 (pid: 0, stack limit = 0x0000000084b153c6) [ 1786.013623] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.86 #137 [ 1786.013631] Hardware name: MediaTek krane sku176 board (DT) [ 1786.013643] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 1786.013662] pc : __memcpy+0x94/0x180 [ 1786.013678] lr : swiotlb_tbl_unmap_single+0x84/0x150 [ 1786.013686] sp : ffffff8008003c60 [ 1786.013694] x29: ffffff8008003c90 x28: ffffffae96411f80 [ 1786.013708] x27: ffffffae960d2018 x26: ffffff8019a4b9a8 [ 1786.013721] x25: 0000000000000000 x24: 0000000000000001 [ 1786.013734] x23: ffffffae96567000 x22: 00000000000051d4 [ 1786.013747] x21: 0000000000000000 x20: 00000000fe6e9000 [ 1786.013760] x19: 0000000000000004 x18: 0000000000000020 [ 1786.013773] x17: 0000000000000001 x16: 0000000000000000 [ 1786.013787] x15: 00000000ffffffff x14: 00000000000044c0 [ 1786.013800] x13: 0000000000365ba4 x12: 0000000000000000 [ 1786.013813] x11: 0000000000000001 x10: 00000037be6e9000 [ 1786.013826] x9 : ffffffc940000000 x8 : 000000000bd45000 [ 1786.013839] x7 : 0000000000000000 x6 : ffffffc00bd45000 [ 1786.013852] x5 : 0000000000000000 x4 : 0000000000000000 [ 1786.013865] x3 : 0000000000000c00 x2 : 0000000000000004 [ 1786.013878] x1 : fffffff7be6e9004 x0 : ffffffc00bd45000 [ 1786.013891] Call trace: [ 1786.013903] __memcpy+0x94/0x180 [ 1786.013914] unmap_single+0x6c/0x84 [ 1786.013925] swiotlb_unmap_sg_attrs+0x54/0x80 [ 1786.013938] __swiotlb_unmap_sg_attrs+0x8c/0xa4 [ 1786.013952] msdc_unprepare_data+0x6c/0x84 [ 1786.013963] msdc_request_done+0x58/0x84 [ 1786.013974] msdc_data_xfer_done+0x1a0/0x1c8 [ 1786.013985] msdc_irq+0x12c/0x17c [ 1786.013996] __handle_irq_event_percpu+0xe4/0x250 [ 1786.014006] handle_irq_event_percpu+0x28/0x68 [ 1786.014015] handle_irq_event+0x48/0x78 [ 1786.014026] handle_fasteoi_irq+0xd0/0x1a0 [ 1786.014039] __handle_domain_irq+0x84/0xc4 [ 1786.014050] gic_handle_irq+0x124/0x1a4 [ 1786.014059] el1_irq+0xb0/0x128 [ 1786.014072] cpuidle_enter_state+0x298/0x328 [ 1786.014082] cpuidle_enter+0x30/0x40 [ 1786.014094] do_idle+0x190/0x268 [ 1786.014104] cpu_startup_entry+0x24/0x28 [ 1786.014116] rest_init+0xd4/0xe0 [ 1786.014126] start_kernel+0x30c/0x38c [ 1786.014139] Code: f8408423 f80084c3 36100062 b8404423 (b80044c3) [ 1786.014150] ---[ end trace 3b02ddb698ea69ee ]--- [ 1786.015415] Kernel panic - not syncing: Fatal exception in interrupt [ 1786.015433] SMP: stopping secondary CPUs [ 1786.015447] Kernel Offset: 0x2e8d200000 from 0xffffff8008000000 [ 1786.015458] CPU features: 0x0,2188200c [ 1786.015466] Memory Limit: none For sdio chip, it need the memory which is kmalloc, if it is vmalloc from ath10k_mem_value_read, then it have a memory error. kzalloc of ath10k_sdio_hif_diag_read32 is the correct type, so add kzalloc in ath10k_sdio_hif_diag_read to replace the buffer which is vmalloc from ath10k_mem_value_read. This patch only effect sdio chip. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01mt76: clear skb pointers from rx aggregation reorder buffer during cleanupFelix Fietkau1-0/+1
[ Upstream commit 9379df2fd9234e3b67a23101c2370c99f6af6d77 ] During the cleanup of the aggregation session, a rx handler (or release timer) on another CPU might still hold a pointer to the reorder buffer and could attempt to release some packets. Clearing pointers during cleanup avoids a theoretical use-after-free bug here. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01ar5523: Add USB ID of SMCWUSBT-G2 wireless adapterMert Dirik1-0/+2
[ Upstream commit 5b362498a79631f283578b64bf6f4d15ed4cc19a ] Add the required USB ID for running SMCWUSBT-G2 wireless adapter (SMC "EZ Connect g"). This device uses ar5523 chipset and requires firmware to be loaded. Even though pid of the device is 4507, this patch adds it as 4506 so that AR5523_DEVICE_UG macro can set the AR5523_FLAG_PRE_FIRMWARE flag for pid 4507. Signed-off-by: Mert Dirik <mertdirik@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01ath10k: fix memory leak for tpc_stats_finalMiaoqing Pan1-0/+1
[ Upstream commit 486a8849843455298d49e694cca9968336ce2327 ] The memory of ar->debug.tpc_stats_final is reallocated every debugfs reading, it should be freed in ath10k_debug_destroy() for the last allocation. Tested HW: QCA9984 Tested FW: 10.4-3.9.0.2-00035 Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01ath10k: fix array out-of-bounds accessMiaoqing Pan2-19/+32
[ Upstream commit c5329b2d5b8b4e41be14d31ee8505b4f5607bf9b ] If firmware reports rate_max > WMI_TPC_RATE_MAX(WMI_TPC_FINAL_RATE_MAX) or num_tx_chain > WMI_TPC_TX_N_CHAIN, it will cause array out-of-bounds access, so print a warning and reset to avoid memory corruption. Tested HW: QCA9984 Tested FW: 10.4-3.9.0.2-00035 Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-26net: wan: wanxl: use $(M68KCC) instead of $(M68KAS) for rebuilding firmwareMasahiro Yamada1-3/+3
commit 734f3719d3438f9cc181d674c33ca9762e9148a1 upstream. The firmware source, wanxlfw.S, is currently compiled by the combo of $(CPP) and $(M68KAS). This is not what we usually do for compiling *.S files. In fact, this Makefile is the only user of $(AS) in the kernel build. Instead of combining $(CPP) and (AS) from different tool sets, using $(M68KCC) as an assembler driver is simpler, and saner. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-26net: wan: wanxl: use allow to pass CROSS_COMPILE_M68k for rebuilding firmwareMasahiro Yamada2-7/+7
commit 63b903dfebdea92aa92ad337d8451a6fbfeabf9d upstream. As far as I understood from the Kconfig help text, this build rule is used to rebuild the driver firmware, which runs on an old m68k-based chip. So, you need m68k tools for the firmware rebuild. wanxl.c is a PCI driver, but CONFIG_M68K does not select CONFIG_HAVE_PCI. So, you cannot enable CONFIG_WANXL_BUILD_FIRMWARE for ARCH=m68k. In other words, ifeq ($(ARCH),m68k) is false here. I am keeping the dead code for now, but rebuilding the firmware requires 'as68k' and 'ld68k', which I do not have in hand. Instead, the kernel.org m68k GCC [1] successfully built it. Allowing a user to pass in CROSS_COMPILE_M68K= is handier. [1] https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/9.2.0/x86_64-gcc-9.2.0-nolibc-m68k-linux.tar.xz Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-26net: phy: Avoid NPD upon phy_detach() when driver is unboundFlorian Fainelli1-1/+2
[ Upstream commit c2b727df7caa33876e7066bde090f40001b6d643 ] If we have unbound the PHY driver prior to calling phy_detach() (often via phy_disconnect()) then we can cause a NULL pointer de-reference accessing the driver owner member. The steps to reproduce are: echo unimac-mdio-0:01 > /sys/class/net/eth0/phydev/driver/unbind ip link set eth0 down Fixes: cafe8df8b9bc ("net: phy: Fix lack of reference count on PHY driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-26bnxt_en: Protect bnxt_set_eee() and bnxt_set_pauseparam() with mutex.Michael Chan1-11/+20
[ Upstream commit a53906908148d64423398a62c4435efb0d09652c ] All changes related to bp->link_info require the protection of the link_lock mutex. It's not sufficient to rely just on RTNL. Fixes: 163e9ef63641 ("bnxt_en: Fix race when modifying pause settings.") Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-26bnxt_en: return proper error codes in bnxt_show_tempEdwin Peer1-6/+13
[ Upstream commit d69753fa1ecb3218b56b022722f7a5822735b876 ] Returning "unknown" as a temperature value violates the hwmon interface rules. Appropriate error codes should be returned via device_attribute show instead. These will ultimately be propagated to the user via the file system interface. In addition to the corrected error handling, it is an even better idea to not present the sensor in sysfs at all if it is known that the read will definitely fail. Given that temp1_input is currently the only sensor reported, ensure no hwmon registration if TEMP_MONITOR_QUERY is not supported or if it will fail due to access permissions. Something smarter may be needed if and when other sensors are added. Fixes: 12cce90b934b ("bnxt_en: fix HWRM error when querying VF temperature") Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-26nfp: use correct define to return NONE fecJakub Kicinski1-2/+2
[ Upstream commit 5f6857e808a8bd078296575b417c4b9d160b9779 ] struct ethtool_fecparam carries bitmasks not bit numbers. We want to return 1 (NONE), not 0. Fixes: 0d0870938337 ("nfp: implement ethtool FEC mode settings") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-26net: dsa: rtl8366: Properly clear member configLinus Walleij1-7/+13
[ Upstream commit 4ddcaf1ebb5e4e99240f29d531ee69d4244fe416 ] When removing a port from a VLAN we are just erasing the member config for the VLAN, which is wrong: other ports can be using it. Just mask off the port and only zero out the rest of the member config once ports using of the VLAN are removed from it. Reported-by: Florian Fainelli <f.fainelli@gmail.com> Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-26hdlc_ppp: add range checks in ppp_cp_parse_cr()Dan Carpenter1-5/+11
[ Upstream commit 66d42ed8b25b64eb63111a2b8582c5afc8bf1105 ] There are a couple bugs here: 1) If opt[1] is zero then this results in a forever loop. If the value is less than 2 then it is invalid. 2) It assumes that "len" is more than sizeof(valid_accm) or 6 which can result in memory corruption. In the case of LCP_OPTION_ACCM, then we should check "opt[1]" instead of "len" because, if "opt[1]" is less than sizeof(valid_accm) then "nak_len" gets out of sync and it can lead to memory corruption in the next iterations through the loop. In case of LCP_OPTION_MAGIC, the only valid value for opt[1] is 6, but the code is trying to log invalid data so we should only discard the data when "len" is less than 6 because that leads to a read overflow. Reported-by: ChenNan Of Chaitin Security Research Lab <whutchennan@gmail.com> Fixes: e022c2f07ae5 ("WAN: new synchronous PPP implementation for generic HDLC.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-26geneve: add transport ports in route lookup for geneveMark Gray1-10/+27
[ Upstream commit 34beb21594519ce64a55a498c2fe7d567bc1ca20 ] This patch adds transport ports information for route lookup so that IPsec can select Geneve tunnel traffic to do encryption. This is needed for OVS/OVN IPsec with encrypted Geneve tunnels. This can be tested by configuring a host-host VPN using an IKE daemon and specifying port numbers. For example, for an Openswan-type configuration, the following parameters should be configured on both hosts and IPsec set up as-per normal: $ cat /etc/ipsec.conf conn in ... left=$IP1 right=$IP2 ... leftprotoport=udp/6081 rightprotoport=udp ... conn out ... left=$IP1 right=$IP2 ... leftprotoport=udp rightprotoport=udp/6081 ... The tunnel can then be setup using "ip" on both hosts (but changing the relevant IP addresses): $ ip link add tun type geneve id 1000 remote $IP2 $ ip addr add 192.168.0.1/24 dev tun $ ip link set tun up This can then be tested by pinging from $IP1: $ ping 192.168.0.2 Without this patch the traffic is unencrypted on the wire. Fixes: 2d07dc79fe04 ("geneve: add initial netdev driver for GENEVE tunnels") Signed-off-by: Qiuyu Xiao <qiuyu.xiao.qyx@gmail.com> Signed-off-by: Mark Gray <mark.d.gray@redhat.com> Reviewed-by: Greg Rose <gvrose8192@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-26cxgb4: Fix offset when clearing filter byte countersGanji Aravind1-3/+6
[ Upstream commit 94cc242a067a869c29800aa789d38b7676136e50 ] Pass the correct offset to clear the stale filter hit bytes counter. Otherwise, the counter starts incrementing from the stale information, instead of 0. Fixes: 12b276fbf6e0 ("cxgb4: add support to create hash filters") Signed-off-by: Ganji Aravind <ganji.aravind@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-23hv_netvsc: Remove "unlikely" from netvsc_select_queueHaiyang Zhang1-1/+1
commit 4d820543c54c47a2bd3c95ddbf52f83c89a219a0 upstream. When using vf_ops->ndo_select_queue, the number of queues of VF is usually bigger than the synthetic NIC. This condition may happen often. Remove "unlikely" from the comparison of ndev->real_num_tx_queues. Fixes: b3bf5666a510 ("hv_netvsc: defer queue selection to VF") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-17drivers/net/wan/hdlc_cisco: Add hard_header_lenXie He1-0/+1
[ Upstream commit 1a545ebe380bf4c1433e3c136e35a77764fda5ad ] This driver didn't set hard_header_len. This patch sets hard_header_len for it according to its header_ops->create function. This driver's header_ops->create function (cisco_hard_header) creates a header of (struct hdlc_header), so hard_header_len should be set to sizeof(struct hdlc_header). Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Acked-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-17drivers/net/wan/lapbether: Set network_header before transmittingXie He1-0/+2
[ Upstream commit 91244d108441013b7367b3b4dcc6869998676473 ] Set the skb's network_header before it is passed to the underlying Ethernet device for transmission. This patch fixes the following issue: When we use this driver with AF_PACKET sockets, there would be error messages of: protocol 0805 is buggy, dev (Ethernet interface name) printed in the system "dmesg" log. This is because skbs passed down to the Ethernet device for transmission don't have their network_header properly set, and the dev_queue_xmit_nit function in net/core/dev.c complains about this. Reason of setting the network_header to this place (at the end of the Ethernet header, and at the beginning of the Ethernet payload): Because when this driver receives an skb from the Ethernet device, the network_header is also set at this place. Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-17drivers/net/wan/lapbether: Added needed_tailroomXie He1-0/+1
[ Upstream commit 1ee39c1448c4e0d480c5b390e2db1987561fb5c2 ] The underlying Ethernet device may request necessary tailroom to be allocated by setting needed_tailroom. This driver should also set needed_tailroom to request the tailroom needed by the underlying Ethernet device to be allocated. Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-12net/mlx5e: Don't support phys switch id if not in switchdev modeRoi Dayan1-1/+1
Support for phys switch id ndo added for representors and if we do not have representors there is no need to support it. Since each port return different switch id supporting this block support for creating bond over PFs and attaching to bridge in legacy mode. This bug doesn't exist upstream as the code got refactored and the netdev api is totally different. Fixes: cb67b832921c ("net/mlx5e: Introduce SRIOV VF representors") Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-12net: usb: dm9601: Add USB ID of Keenetic Plus DSLKamil Lorenc1-0/+4
[ Upstream commit a609d0259183a841621f252e067f40f8cc25d6f6 ] Keenetic Plus DSL is a xDSL modem that uses dm9620 as its USB interface. Signed-off-by: Kamil Lorenc <kamil@re-ws.pl> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09net: usb: Fix uninit-was-stored issue in asix_read_phy_addr()Himadri Pandya1-1/+1
commit a092b7233f0e000cc6f2c71a49e2ecc6f917a5fc upstream. The buffer size is 2 Bytes and we expect to receive the same amount of data. But sometimes we receive less data and run into uninit-was-stored issue upon read. Hence modify the error check on the return value to match with the buffer size as a prevention. Reported-and-tested by: syzbot+a7e220df5a81d1ab400e@syzkaller.appspotmail.com Signed-off-by: Himadri Pandya <himadrispandya@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09usb: qmi_wwan: add D-Link DWM-222 A2 device IDRogan Dawes1-0/+1
[ Upstream commit 7d6053097311643545a8118100175a39bd6fa637 ] Signed-off-by: Rogan Dawes <rogan@dawes.za.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-09net: usb: qmi_wwan: add Telit 0x1050 compositionDaniele Palmas1-0/+1
[ Upstream commit e0ae2c578d3909e60e9448207f5d83f785f1129f ] This patch adds support for Telit FN980 0x1050 composition 0x1050: tty, adb, rmnet, tty, tty, tty, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-09tg3: Fix soft lockup when tg3_reset_task() fails.Michael Chan1-4/+13
[ Upstream commit 556699341efa98243e08e34401b3f601da91f5a3 ] If tg3_reset_task() fails, the device state is left in an inconsistent state with IFF_RUNNING still set but NAPI state not enabled. A subsequent operation, such as ifdown or AER error can cause it to soft lock up when it tries to disable NAPI state. Fix it by bringing down the device to !IFF_RUNNING state when tg3_reset_task() fails. tg3_reset_task() running from workqueue will now call tg3_close() when the reset fails. We need to modify tg3_reset_task_cancel() slightly to avoid tg3_close() calling cancel_work_sync() to cancel tg3_reset_task(). Otherwise cancel_work_sync() will wait forever for tg3_reset_task() to finish. Reported-by: David Christensen <drc@linux.vnet.ibm.com> Reported-by: Baptiste Covolato <baptiste@arista.com> Fixes: db2199737990 ("tg3: Schedule at most one tg3_reset_task run") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-09net: gemini: Fix another missing clk_disable_unprepare() in probeDan Carpenter1-17/+17
[ Upstream commit eb0f3bc463d59d86402f19c59aa44e82dc3fab6d ] We recently added some calls to clk_disable_unprepare() but we missed the last error path if register_netdev() fails. I made a couple cleanups so we avoid mistakes like this in the future. First I reversed the "if (!ret)" condition and pulled the code in one indent level. Also, the "port->netdev = NULL;" is not required because "port" isn't used again outside this function so I deleted that line. Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-26 03:31:23 +0300