summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2020-01-27brcmfmac: create debugfs files for bus-specific layerArend van Spriel3-5/+18
[ Upstream commit aaf6a5e86e36766abbeedf220462bde8031f9a72 ] Since we moved the drivers debugfs directory under ieee80211 debugfs the debugfs entries need to be added after wiphy_register() has been called. For most part that has been done accordingly, but for the debugfs entries added by SDIO it was not and failed silently. This patch fixes that by adding a bus-layer callback for it. Fixes: 856d5a011c86 ("brcmfmac: allocate struct brcmf_pub instance using wiphy_new()") Reported-by: Russel King <linux@armlinux.org.uk> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27mdio_bus: Fix PTR_ERR() usage after initialization to constantYueHaibing1-5/+6
[ Upstream commit 780feae7eb69388c8d8b661cda6706b0dc0f642b ] Fix coccinelle warning: ./drivers/net/phy/mdio_bus.c:51:5-12: ERROR: PTR_ERR applied after initialization to constant on line 44 ./drivers/net/phy/mdio_bus.c:52:5-12: ERROR: PTR_ERR applied after initialization to constant on line 44 fix this by using IS_ERR before PTR_ERR Fixes: bafbdd527d56 ("phylib: Add device reset GPIO support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27mt76: usb: fix possible memory leak in mt76u_buf_freeLorenzo Bianconi1-4/+10
[ Upstream commit cb83585e1121bd6d6c039cf09fa32380bf8b6258 ] Move q->ndesc initialization before the for loop in mt76u_alloc_rx since otherwise allocated urbs will not be freed in mt76u_buf_free Double-check scatterlist pointer in mt76u_buf_free Fixes: b40b15e1521f ("mt76: add usb support to mt76 layer") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27net: dsa: b53: Do not program CPU port's PVIDFlorian Fainelli1-1/+1
[ Upstream commit 10163aaee9671b01b2f4737922e1a4f43581047a ] The CPU port is special and does not need to obey VLAN restrictions as far as untagged traffic goes, also, having the CPU port be part of a particular PVID is against the idea of keeping it tagged in all VLANs. Fixes: ca8931948344 ("net: dsa: b53: Keep CPU port as tagged in all VLANs") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27net: dsa: b53: Properly account for VLAN filteringFlorian Fainelli2-5/+57
[ Upstream commit dad8d7c6452b5b9f9828c9e2c7ca143205fd40c7 ] VLAN filtering can be built into the kernel, and also dynamically turned on/off through the bridge master device. Allow re-configuring the switch appropriately to account for that by deciding whether VLAN table (v_table) misses should lead to a drop or forward. Fixes: a2482d2ce349 ("net: dsa: b53: Plug in VLAN support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27net: dsa: b53: Fix default VLAN IDFlorian Fainelli1-13/+16
[ Upstream commit fea83353177a55540c71c140887737c282137aa2 ] We were not consistent in how the default VID of a given port was defined, b53_br_leave() would make sure the VLAN ID would be either 0/1 depending on the switch generation, but b53_configure_vlan(), which is the default configuration would unconditionally set it to 1. The correct value is 1 for 5325/5365 series and 0 otherwise. To avoid repeating that mistake ever again, introduce a helper function: b53_default_pvid() to factor that out. Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27net: phy: fixed_phy: Fix fixed_phy not checking GPIOMoritz Fischer1-3/+3
[ Upstream commit 8f289805616e81f7c1690931aa8a586c76f4fa88 ] Fix fixed_phy not checking GPIO if no link_update callback is registered. In the original version all users registered a link_update callback so the issue was masked. Fixes: a5597008dbc2 ("phy: fixed_phy: Add gpio to determine link up/down.") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27ath10k: fix dma unmap direction for management framesRakesh Pillai2-4/+4
[ Upstream commit 6e8a8991e2103dcb6a9cff28f460390e8e360848 ] The management frames transmitted are dma mapped with direction TO_DEVICE, but incorrectly mapped with direction FROM_DEVICE during tx complete and error cases. Fix the direction of dma during dma unmap of the transmitted management frames. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 Fixes: 38a1390e02b7 ("ath10k: dma unmap mgmt tx buffer if wmi cmd send fails") Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27iwlwifi: mvm: fix RSS config commandSara Sharon1-6/+6
[ Upstream commit 608dce95db10b8ee1a26dbce3f60204bb69812a5 ] The hash mask is a bitmap, so we should use BIT() on the enum values. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Fixes: 43413a975d06 ("iwlwifi: mvm: support rss queues configuration command") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27iwlwifi: mvm: fix A-MPDU reference assignmentJohannes Berg1-1/+1
[ Upstream commit 1f7698abedeeb3fef3cbcf78e16f925df675a179 ] The current code assigns the reference, and then goes to increment it if the toggle bit has changed. That way, we get Toggle 0 0 0 0 1 1 1 1 ID 1 1 1 1 1 2 2 2 Fix that by assigning the post-toggle ID to get Toggle 0 0 0 0 1 1 1 1 ID 1 1 1 1 2 2 2 2 Reported-by: Danny Alexander <danny.alexander@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Fixes: fbe4112791b8 ("iwlwifi: mvm: update mpdu metadata API") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27net/mlx5: Take lock with IRQs disabled to avoid deadlockMoni Shoua1-2/+3
[ Upstream commit 33814e5d127e21f53b52e17b0722c1b57d4f4d29 ] The lock in qp_table might be taken from process context or from interrupt context. This may lead to a deadlock unless it is taken with IRQs disabled. Discovered by lockdep ================================ WARNING: inconsistent lock state 4.20.0-rc6 -------------------------------- inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} python/12572 [HC1[1]:SC0[0]:HE0:SE1] takes: 00000000052a4df4 (&(&table->lock)->rlock#2){?.+.}, /0x50 [mlx5_core] {HARDIRQ-ON-W} state was registered at: _raw_spin_lock+0x33/0x70 mlx5_get_rsc+0x1a/0x50 [mlx5_core] mlx5_ib_eqe_pf_action+0x493/0x1be0 [mlx5_ib] process_one_work+0x90c/0x1820 worker_thread+0x87/0xbb0 kthread+0x320/0x3e0 ret_from_fork+0x24/0x30 irq event stamp: 103928 hardirqs last enabled at (103927): [] nk+0x1a/0x1c hardirqs last disabled at (103928): [] unk+0x1a/0x1c softirqs last enabled at (103924): [] tcp_sendmsg+0x31/0x40 softirqs last disabled at (103922): [] 80 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&table->lock)->rlock#2); lock(&(&table->lock)->rlock#2); *** DEADLOCK *** Fixes: 032080ab43ac ("IB/mlx5: Lock QP during page fault handling") Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27iwlwifi: mvm: avoid possible access out of array.Mordechay Goodstein1-6/+13
[ Upstream commit b0d795a9ae558209656b18930c2b4def5f8fdfb8 ] The value in txq_id can be out of array scope, validate it before accessing the array. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Fixes: cf961e16620f ("iwlwifi: mvm: support dqa-mode agg on non-shared queue") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27net: hns3: fix bug of ethtool_ops.get_channels for VFHuazhong Tan1-2/+3
[ Upstream commit 8be7362186bd5ccb5f6f72be49751ad2778e2636 ] The current code returns the number of all queues that can be used and the number of queues that have been allocated, which is incorrect. What should be returned is the number of queues allocated for each enabled TC and the number of queues that can be allocated. This patch fixes it. Fixes: 849e46077689 ("net: hns3: add ethtool_ops.get_channels support for VF") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27net: hns3: fix wrong combined count returned by ethtool -lHuazhong Tan1-4/+3
[ Upstream commit c3b9c50d1567aa12be4448fe85b09626eba2499c ] The current code returns the number of all queues that can be used and the number of queues that have been allocated, which is incorrect. What should be returned is the number of queues allocated for each enabled TC and the number of queues that can be allocated. This patch fixes it. Fixes: 482d2e9c1cc7 ("net: hns3: add support to query tqps number") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27net: phy: micrel: set soft_reset callback to genphy_soft_reset for KSZ9031Heiner Kallweit1-0/+1
[ Upstream commit 1d16073a326891c2a964e4cb95bc18fbcafb5f74 ] So far genphy_soft_reset was used automatically if the PHY driver didn't implement the soft_reset callback. This changed with the mentioned commit and broke KSZ9031. To fix this configure the KSZ9031 PHY driver to use genphy_soft_reset. Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27vxlan: changelink: Fix handling of default remotesPetr Machata1-4/+3
[ Upstream commit ce5e098f7a10b4bf8e948c12fa350320c5c3afad ] Default remotes are stored as FDB entries with an Ethernet address of 00:00:00:00:00:00. When a request is made to change a remote address of a VXLAN device, vxlan_changelink() first deletes the existing default remote, and then creates a new FDB entry. This works well as long as the list of default remotes matches exactly the configuration of a VXLAN remote address. Thus when the VXLAN device has a remote of X, there should be exactly one default remote FDB entry X. If the VXLAN device has no remote address, there should be no such entry. Besides using "ip link set", it is possible to manipulate the list of default remotes by using the "bridge fdb". It is therefore easy to break the above condition. Under such circumstances, the __vxlan_fdb_delete() call doesn't delete the FDB entry itself, but just one remote. The following vxlan_fdb_create() then creates a new FDB entry, leading to a situation where two entries exist for the address 00:00:00:00:00:00, each with a different subset of default remotes. An even more obvious breakage rooted in the same cause can be observed when a remote address is configured for a VXLAN device that did not have one before. In that case vxlan_changelink() doesn't remove any remote, and just creates a new FDB entry for the new address: $ ip link add name vx up type vxlan id 2000 dstport 4789 $ bridge fdb ap dev vx 00:00:00:00:00:00 dst 192.0.2.20 self permanent $ bridge fdb ap dev vx 00:00:00:00:00:00 dst 192.0.2.30 self permanent $ ip link set dev vx type vxlan remote 192.0.2.30 $ bridge fdb sh dev vx | grep 00:00:00:00:00:00 00:00:00:00:00:00 dst 192.0.2.30 self permanent <- new entry, 1 rdst 00:00:00:00:00:00 dst 192.0.2.20 self permanent <- orig. entry, 2 rdsts 00:00:00:00:00:00 dst 192.0.2.30 self permanent To fix this, instead of calling vxlan_fdb_create() directly, defer to vxlan_fdb_update(). That has logic to handle the duplicates properly. Additionally, it also handles notifications, so drop that call from changelink as well. Fixes: 0241b836732f ("vxlan: fix default fdb entry netlink notify ordering during netdev create") Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27net: hns3: fix error handling int the hns3_get_vector_ring_chainHuazhong Tan1-2/+3
[ Upstream commit cda69d244585bc4497d3bb878c22fe2b6ad647c1 ] When hns3_get_vector_ring_chain() failed in the hns3_nic_init_vector_data(), it should do the error handling instead of return directly. Also, cur_chain should be freed instead of chain and head->next should be set to NULL in error handling of hns3_get_vector_ring_chain. This patch fixes them. Fixes: 73b907a083b8 ("net: hns3: bugfix for buffer not free problem during resetting") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27net: phy: Fix not to call phy_resume() if PHY is not attachedYoshihiro Shimoda1-5/+6
[ Upstream commit ef1b5bf506b1f0ee3edc98533e1f3ecb105eb46a ] This patch fixes an issue that mdio_bus_phy_resume() doesn't call phy_resume() if the PHY is not attached. Fixes: 803dd9c77ac3 ("net: phy: avoid suspending twice a PHY") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27mlxsw: spectrum: Set minimum shaper on MC TCsPetr Machata1-0/+25
[ Upstream commit 0fe64023162aef123de2f1993ba13a35a786e1de ] An MC-aware mode was introduced in commit 7b8195306694 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports"). In MC-aware mode, BUM traffic gets a special treatment by being assigned to a separate set of traffic classes 8..15. Pairs of TCs 0 and 8, 1 and 9, etc., are then configured to strictly prioritize the lower-numbered ones. The intention is to prevent BUM traffic from flooding the switch and push out all UC traffic, which would otherwise happen, and instead give UC traffic precedence. However strictly prioritizing UC traffic has the effect that UC overload pushes out all BUM traffic, such as legitimate ARP queries. These packets are kept in queues for a while, but under sustained UC overload, their lifetime eventually expires and these packets are dropped. That is detrimental to network performance as well. Therefore configure the MC TCs (8..15) with minimum shaper of 200Mbps (a minimum permitted value) to allow a trickle of necessary control traffic to get through. Fixes: 7b8195306694 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27mlxsw: reg: QEEC: Add minimum shaper fieldsPetr Machata1-1/+21
[ Upstream commit 8b931821aa04823e2e5df0ae93937baabbd23286 ] Add QEEC.mise (minimum shaper enable) and QEEC.min_shaper_rate to enable configuration of minimum shaper. Increase the QEEC length to 0x20 as well: that's the length that the register has had for a long time now, but with the configurations that mlxsw typically exercises, the firmware tolerated 0x1C-sized packets. With mise=true however, FW rejects packets unless they have the full required length. Fixes: b9b7cee40579 ("mlxsw: reg: Add QoS ETS Element Configuration register") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27net: hns3: add error handler for hns3_nic_init_vector_data()Huazhong Tan1-2/+8
[ Upstream commit ece4bf46e98c9f3775a488f3932a531508d3b1a2 ] When hns3_nic_init_vector_data() fails to map ring to vector, it should cancel the netif_napi_add() that has been successfully done and then exits. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27net: socionext: Add dummy PHY register read in phy_write()Masahisa Kojima1-2/+16
[ Upstream commit a3241a91de6429051a211b5ce04d6946157caec7 ] There is a compatibility issue between RTL8211E implemented in Developerbox and netsec ethernet controller IP. Our MDIO controller stops MDC clock right after the write access, but RTL8211E expects MDC clock must be kept toggling for several clock cycle with MDIO high before entering the IDLE state. Without keeping clock after write access, write access is not correctly handled and register is not updated. To meet this requirement, netsec driver needs to issue dummy read(e.g. read PHYID1(offset 0x2) register) right after write access, to keep MDC clock. We think this compatibility issue is a problem specific to our MDIO controller and RTL8211E. Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver") Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Signed-off-by: Yoshitoyo Osaki <osaki.yoshitoyo@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27rtlwifi: rtl8821ae: replace _rtl8821ae_mrate_idx_to_arfr_id with generic versionColin Ian King1-70/+1
[ Upstream commit c894696188d5c2af1e636e458190e80c53fb893d ] Function _rtl8821ae_mrate_idx_to_arfr_id is functionally identical to the generic version rtl_mrate_idx_to_arfr_id, so remove _rtl8821ae_mrate_idx_to_arfr_id and use the generic one instead. This also fixes a missing break statement found by CoverityScan in _rtl8821ae_mrate_idx_to_arfr_id, namely: CID#1167237 ("Missing break in switch") Thanks to Joe Perches for spotting this when I submitted an earlier patch. Fixes: 3c05bedb5fef ("Staging: rtl8812ae: Add Realtek 8821 PCI WIFI driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> ACKed-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27iwlwifi: nvm: get num of hw addresses from firmwareNaftali Goldstein2-8/+16
[ Upstream commit e7eeee08434873c2f781dc1afaa42b03a014b95d ] With NICs that don't read the NVM directly and instead rely on getting the relevant data from the firmware, the number of reserved MAC addresses was not added to the API. This caused the driver to assume there is only one address which results in all interfaces getting the same address. Update the API to fix this. While at it, fix-up the comments with firmware api names to actually match what we have in the firmware. Fixes: e9e1ba3dbf00 ("iwlwifi: mvm: support getting nvm data from firmware") Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27ixgbe: don't clear IPsec sa counters on HW clearingShannon Nelson1-4/+0
[ Upstream commit 9e3f2f5ecee69b0f70003fb3e07639151e91de73 ] The software SA record counters should not be cleared when clearing the hardware tables. This causes the counters to be out of sync after a driver reset. Fixes: 63a67fe229ea ("ixgbe: add ipsec offload add and remove SA") Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27mt7601u: fix bbp version check in mt7601u_wait_bbp_readyLorenzo Bianconi1-1/+1
commit 15e14f76f85f4f0eab3b8146e1cd3c58ce272823 upstream. Fix bbp ready check in mt7601u_wait_bbp_ready. The issue is reported by coverity with the following error: Logical vs. bitwise operator The expression's value does not depend on the operands; inadvertent use of the wrong operator is a likely logic error. Addresses-Coverity-ID: 1309441 ("Logical vs. bitwise operator") Fixes: c869f77d6abb ("add mt7601u driver") Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23cw1200: Fix a signedness bug in cw1200_load_firmware()Dan Carpenter1-3/+3
commit 4a50d454502f1401171ff061a5424583f91266db upstream. The "priv->hw_type" is an enum and in this context GCC will treat it as an unsigned int so the error handling will never trigger. Fixes: a910e4a94f69 ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23mlxsw: spectrum_qdisc: Include MC TCs in Qdisc countersPetr Machata1-7/+23
commit 85005b82e59fa7bb7388b12594ab2067bf73d66c upstream. mlxsw configures Spectrum in such a way that BUM traffic is passed not through its nominal traffic class TC, but through its MC counterpart TC+8. However, when collecting statistics, Qdiscs only look at the nominal TC and ignore the MC TC. Add two helpers to compute the value for logical TC from the constituents, one for backlog, the other for tail drops. Use them throughout instead of going through the xstats pointer directly. Counters for TX bytes and packets are deduced from packet priority counters, and therefore already include BUM traffic. wred_drop counter is irrelevant on MC TCs, because RED is not enabled on them. Fixes: 7b8195306694 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports") Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23mlxsw: spectrum: Wipe xstats.backlog of down portsPetr Machata1-0/+13
commit ca7609ff3680c51d6c29897f3117aa2ad904f92a upstream. Per-port counter cache used by Qdiscs is updated periodically, unless the port is down. The fact that the cache is not updated for down ports is no problem for most counters, which are relative in nature. However, backlog is absolute in nature, and if there is a non-zero value in the cache around the time that the port goes down, that value just stays there. This value then leaks to offloaded Qdiscs that report non-zero backlog even if there (obviously) is no traffic. The HW does not keep backlog of a downed port, so do likewise: as the port goes down, wipe the backlog value from xstats. Fixes: 075ab8adaf4e ("mlxsw: spectrum: Collect tclass related stats periodically") Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23sh_eth: check sh_eth_cpu_data::dual_port when dumping registersSergei Shtylyov1-17/+21
commit 3249b1e442a1be1a6b9f1026785b519d1443f807 upstream. When adding the sh_eth_cpu_data::dual_port flag I forgot to add the flag checks to __sh_eth_get_regs(), causing the non-existing TSU registers to be dumped by 'ethtool' on the single port Ether controllers having TSU... Fixes: a94cf2a614f8 ("sh_eth: fix TSU init on SH7734/R8A7740") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23r8152: add missing endpoint sanity checkJohan Hovold1-0/+3
[ Upstream commit 86f3f4cd53707ceeec079b83205c8d3c756eca93 ] Add missing endpoint sanity check to probe in order to prevent a NULL-pointer dereference (or slab out-of-bounds access) when retrieving the interrupt-endpoint bInterval on ndo_open() in case a device lacks the expected endpoints. Fixes: 40a82917b1d3 ("net/usb/r8152: enable interrupt transfer") Cc: hayeswang <hayeswang@realtek.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23net/wan/fsl_ucc_hdlc: fix out of bounds write on array utdm_infoColin Ian King1-1/+1
[ Upstream commit ddf420390526ede3b9ff559ac89f58cb59d9db2f ] Array utdm_info is declared as an array of MAX_HDLC_NUM (4) elements however up to UCC_MAX_NUM (8) elements are potentially being written to it. Currently we have an array out-of-bounds write error on the last 4 elements. Fix this by making utdm_info UCC_MAX_NUM elements in size. Addresses-Coverity: ("Out-of-bounds write") Fixes: c19b6d246a35 ("drivers/net: support hdlc function for QE-UCC") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23net: usb: lan78xx: limit size of local TSO packetsEric Dumazet1-0/+1
[ Upstream commit f8d7408a4d7f60f8b2df0f81decdc882dd9c20dc ] lan78xx_tx_bh() makes sure to not exceed MAX_SINGLE_PACKET_SIZE bytes in the aggregated packets it builds, but does nothing to prevent large GSO packets being submitted. Pierre-Francois reported various hangs when/if TSO is enabled. For localy generated packets, we can use netif_set_gso_max_size() to limit the size of TSO packets. Note that forwarded packets could still hit the issue, so a complete fix might require implementing .ndo_features_check for this driver, forcing a software segmentation if the size of the TSO packet exceeds MAX_SINGLE_PACKET_SIZE. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: RENARD Pierre-Francois <pfrenard@gmail.com> Tested-by: RENARD Pierre-Francois <pfrenard@gmail.com> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Woojung Huh <woojung.huh@microchip.com> Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23net: hns: fix soft lockup when there is not enough memoryYonglong Liu1-3/+1
[ Upstream commit 49edd6a2c456150870ddcef5b7ed11b21d849e13 ] When there is not enough memory and napi_alloc_skb() return NULL, the HNS driver will print error message, and than try again, if the memory is not enough for a while, huge error message and the retry operation will cause soft lockup. When napi_alloc_skb() return NULL because of no memory, we can get a warn_alloc() call trace, so this patch deletes the error message. We already use polling mode to handle irq, but the retry operation will render the polling weight inactive, this patch just return budget when the rx is not completed to avoid dead loop. Fixes: 36eedfde1a36 ("net: hns: Optimize hns_nic_common_poll for better performance") Fixes: b5996f11ea54 ("net: add Hisilicon Network Subsystem basic ethernet support") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23hv_netvsc: Fix memory leak when removing rndis deviceMohammed Gamal1-2/+0
[ Upstream commit 536dc5df2808efbefc5acee334d3c4f701790ec0 ] kmemleak detects the following memory leak when hot removing a network device: unreferenced object 0xffff888083f63600 (size 256): comm "kworker/0:1", pid 12, jiffies 4294831717 (age 1113.676s) hex dump (first 32 bytes): 00 40 c7 33 80 88 ff ff 00 00 00 00 10 00 00 00 .@.3............ 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... backtrace: [<00000000d4a8f5be>] rndis_filter_device_add+0x117/0x11c0 [hv_netvsc] [<000000009c02d75b>] netvsc_probe+0x5e7/0xbf0 [hv_netvsc] [<00000000ddafce23>] vmbus_probe+0x74/0x170 [hv_vmbus] [<00000000046e64f1>] really_probe+0x22f/0xb50 [<000000005cc35eb7>] driver_probe_device+0x25e/0x370 [<0000000043c642b2>] bus_for_each_drv+0x11f/0x1b0 [<000000005e3d09f0>] __device_attach+0x1c6/0x2f0 [<00000000a72c362f>] bus_probe_device+0x1a6/0x260 [<0000000008478399>] device_add+0x10a3/0x18e0 [<00000000cf07b48c>] vmbus_device_register+0xe7/0x1e0 [hv_vmbus] [<00000000d46cf032>] vmbus_add_channel_work+0x8ab/0x1770 [hv_vmbus] [<000000002c94bb64>] process_one_work+0x919/0x17d0 [<0000000096de6781>] worker_thread+0x87/0xb40 [<00000000fbe7397e>] kthread+0x333/0x3f0 [<000000004f844269>] ret_from_fork+0x3a/0x50 rndis_filter_device_add() allocates an instance of struct rndis_device which never gets deallocated as rndis_filter_device_remove() sets net_device->extension which points to the rndis_device struct to NULL, leaving the rndis_device dangling. Since net_device->extension is eventually freed in free_netvsc_device(), we refrain from setting it to NULL inside rndis_filter_device_remove() Signed-off-by: Mohammed Gamal <mgamal@redhat.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23macvlan: use skb_reset_mac_header() in macvlan_queue_xmit()Eric Dumazet1-2/+3
[ Upstream commit 1712b2fff8c682d145c7889d2290696647d82dab ] I missed the fact that macvlan_broadcast() can be used both in RX and TX. skb_eth_hdr() makes only sense in TX paths, so we can not use it blindly in macvlan_broadcast() Fixes: 96cc4b69581d ("macvlan: do not assume mac_header is set in macvlan_broadcast()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jurgen Van Ham <juvanham@gmail.com> Tested-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-23net: stmmac: Enable 16KB buffer sizeJose Abreu1-1/+3
commit b2f3a481c4cd62f78391b836b64c0a6e72b503d2 upstream. XGMAC supports maximum MTU that can go to 16KB. Lets add this check in the calculation of RX buffer size. Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23net: stmmac: 16KB buffer must be 16 byte alignedJose Abreu1-3/+2
commit 8605131747e7e1fd8f6c9f97a00287aae2b2c640 upstream. The 16KB RX Buffer must also be 16 byte aligned. Fix it. Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-17rtlwifi: Remove unnecessary NULL check in rtl_regd_initNathan Chancellor1-1/+1
commit 091c6e9c083f7ebaff00b37ad13562d51464d175 upstream. When building with Clang + -Wtautological-pointer-compare: drivers/net/wireless/realtek/rtlwifi/regd.c:389:33: warning: comparison of address of 'rtlpriv->regd' equal to a null pointer is always false [-Wtautological-pointer-compare] if (wiphy == NULL || &rtlpriv->regd == NULL) ~~~~~~~~~^~~~ ~~~~ 1 warning generated. The address of an array member is never NULL unless it is the first struct member so remove the unnecessary check. This was addressed in the staging version of the driver in commit f986978b32b3 ("Staging: rtlwifi: remove unnecessary NULL check"). While we are here, fix the following checkpatch warning: CHECK: Comparison to NULL could be written "!wiphy" 35: FILE: drivers/net/wireless/realtek/rtlwifi/regd.c:389: + if (wiphy == NULL) Fixes: 0c8173385e54 ("rtl8192ce: Add new driver") Link:https://github.com/ClangBuiltLinux/linux/issues/750 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-17iwlwifi: pcie: fix memory leaks in iwl_pcie_ctxt_info_gen3_initNavid Emamdoost1-11/+25
commit 0f4f199443faca715523b0659aa536251d8b978f upstream. In iwl_pcie_ctxt_info_gen3_init there are cases that the allocated dma memory is leaked in case of error. DMA memories prph_scratch, prph_info, and ctxt_info_gen3 are allocated and initialized to be later assigned to trans_pcie. But in any error case before such assignment the allocated memories should be released. First of such error cases happens when iwl_pcie_init_fw_sec fails. Current implementation correctly releases prph_scratch. But in two sunsequent error cases where dma_alloc_coherent may fail, such releases are missing. This commit adds release for prph_scratch when allocation for prph_info fails, and adds releases for prph_scratch and prph_info when allocation for ctxt_info_gen3 fails. Fixes: 2ee824026288 ("iwlwifi: pcie: support context information for 22560 devices") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-17iwlwifi: dbg_ini: fix memory leak in alloc_sgtableNavid Emamdoost1-0/+1
commit b4b814fec1a5a849383f7b3886b654a13abbda7d upstream. In alloc_sgtable if alloc_page fails, the alocated table should be released. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14ath10k: fix memory leakNavid Emamdoost1-0/+1
commit b8d17e7d93d2beb89e4f34c59996376b8b544792 upstream. In ath10k_usb_hif_tx_sg the allocated urb should be released if usb_submit_urb fails. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14rtl8xxxu: prevent leaking urbNavid Emamdoost1-0/+1
commit a2cdd07488e666aa93a49a3fc9c9b1299e27ef3c upstream. In rtl8xxxu_submit_int_urb if usb_submit_urb fails the allocated urb should be released. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14mwifiex: pcie: Fix memory leak in mwifiex_pcie_alloc_cmdrsp_bufNavid Emamdoost1-1/+3
commit db8fd2cde93227e566a412cf53173ffa227998bc upstream. In mwifiex_pcie_alloc_cmdrsp_buf, a new skb is allocated which should be released if mwifiex_map_pci_memory() fails. The release is added. Fixes: fc3314609047 ("mwifiex: use pci_alloc/free_consistent APIs for PCIe") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Acked-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14mwifiex: fix possible heap overflow in mwifiex_process_country_ie()Ganapathi Bhat1-2/+11
commit 3d94a4a8373bf5f45cf5f939e88b8354dbf2311b upstream. mwifiex_process_country_ie() function parse elements of bss descriptor in beacon packet. When processing WLAN_EID_COUNTRY element, there is no upper limit check for country_ie_len before calling memcpy. The destination buffer domain_info->triplet is an array of length MWIFIEX_MAX_TRIPLET_802_11D(83). The remote attacker can build a fake AP with the same ssid as real AP, and send malicous beacon packet with long WLAN_EID_COUNTRY elemen (country_ie_len > 83). Attacker can force STA connect to fake AP on a different channel. When the victim STA connects to fake AP, will trigger the heap buffer overflow. Fix this by checking for length and if found invalid, don not connect to the AP. This fix addresses CVE-2019-14895. Reported-by: huangwen <huangwenabc@gmail.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14can: mscan: mscan_rx_poll(): fix rx path lockup when returning from polling ↵Florian Faber1-11/+10
to irq mode commit 2d77bd61a2927be8f4e00d9478fe6996c47e8d45 upstream. Under load, the RX side of the mscan driver can get stuck while TX still works. Restarting the interface locks up the system. This behaviour could be reproduced reliably on a MPC5121e based system. The patch fixes the return value of the NAPI polling function (should be the number of processed packets, not constant 1) and the condition under which IRQs are enabled again after polling is finished. With this patch, no more lockups were observed over a test period of ten days. Fixes: afa17a500a36 ("net/can: add driver for mscan family & mpc52xx_mscan") Signed-off-by: Florian Faber <faber@faberman.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14can: gs_usb: gs_usb_probe(): use descriptors of current altsettingJohan Hovold1-2/+2
commit 2f361cd9474ab2c4ab9ac8db20faf81e66c6279b upstream. Make sure to always use the descriptors of the current alternate setting to avoid future issues when accessing fields that may differ between settings. Signed-off-by: Johan Hovold <johan@kernel.org> Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14can: kvaser_usb: fix interface sanity checkJohan Hovold2-2/+2
commit 5660493c637c9d83786f1c9297f403eae44177b6 upstream. Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family") Cc: stable <stable@vger.kernel.org> # 4.19 Cc: Jimmy Assarsson <extja@kvaser.com> Cc: Christer Beskow <chbe@kvaser.com> Cc: Nicklas Johansson <extnj@kvaser.com> Cc: Martin Henriksson <mh@kvaser.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-12mlxsw: spectrum_qdisc: Ignore grafting of invisible FIFOPetr Machata1-0/+7
[ Upstream commit 3971a535b839489e4ea31796cc086e6ce616318c ] The following patch will change PRIO to replace a removed Qdisc with an invisible FIFO, instead of NOOP. mlxsw will see this replacement due to the graft message that is generated. But because FIFO does not issue its own REPLACE message, when the graft operation takes place, the Qdisc that mlxsw tracks under the indicated band is still the old one. The child handle (0:0) therefore does not match, and mlxsw rejects the graft operation, which leads to an extack message: Warning: Offloading graft operation failed. Fix by ignoring the invisible children in the PRIO graft handler. The DESTROY message of the removed Qdisc is going to follow shortly and handle the removal. Fixes: 32dc5efc6cb4 ("mlxsw: spectrum: qdiscs: prio: Handle graft command") Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-12vxlan: fix tos value before xmitHangbin Liu1-2/+2
[ Upstream commit 71130f29979c7c7956b040673e6b9d5643003176 ] Before ip_tunnel_ecn_encap() and udp_tunnel_xmit_skb() we should filter tos value by RT_TOS() instead of using config tos directly. vxlan_get_route() would filter the tos to fl4.flowi4_tos but we didn't return it back, as geneve_get_v4_rt() did. So we have to use RT_TOS() directly in function ip_tunnel_ecn_encap(). Fixes: 206aaafcd279 ("VXLAN: Use IP Tunnels tunnel ENC encap API") Fixes: 1400615d64cf ("vxlan: allow setting ipv6 traffic class") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 21:13:55 +0300