summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2016-04-28treewide: Fix typos in printkMasanari Iida3-4/+4
This patch fix spelling typos in printk from various part of the codes. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-04-18treewide: Fix typos in printkMasanari Iida2-3/+3
This patch fix spelling typos found in printk within various part of the kernel sources. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-04-08tuntap: restore default qdiscJason Wang1-2/+2
After commit f84bb1eac027 ("net: fix IFF_NO_QUEUE for drivers using alloc_netdev"), default qdisc was changed to noqueue because tuntap does not set tx_queue_len during .setup(). This patch restores default qdisc by setting tx_queue_len in tun_setup(). Fixes: f84bb1eac027 ("net: fix IFF_NO_QUEUE for drivers using alloc_netdev") Cc: Phil Sutter <phil@nwl.cc> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-06stmmac: fix adjust link call in case of a switch is attachedGiuseppe CAVALLARO1-12/+10
While initializing the phy, the stmmac driver sets the PHY_IGNORE_INTERRUPT so the PAL won't call the adjust hook that is needed, on some platforms, e.g. STi, to invoke the glue. The patch allows the PAL to poll the stmmac_adjust_link just one time in case of a switch is attached, setting later the PHY_IGNORE_INTERRUPT flag. Moving this kind of logic inside the adjust_link it makes sense to anticipate the check for EEE that will never initialized in this scenario. Reported-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Tested-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Cc: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-06cxgb4: Add pci device id for chelsio t520-cr adapterHariprasad Shenai1-0/+1
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-06e1000: Double Tx descriptors needed check for 82544Alexander Duyck1-1/+18
The 82544 has code that adds one additional descriptor per data buffer. However we weren't taking that into account when determining the descriptors needed for the next transmit at the end of the xmit_frame path. This change takes that into account by doubling the number of descriptors needed for the 82544 so that we can avoid a potential issue where we could hang the Tx ring by loading frames with xmit_more enabled and then stopping the ring without writing the tail. In addition it adds a few more descriptors to account for some additional workarounds that have been added over time. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-06e1000: Do not overestimate descriptor counts in Tx pre-checkAlexander Duyck1-1/+1
The current code path is capable of grossly overestimating the number of descriptors needed to transmit a new frame. This specifically occurs if the skb contains a number of 4K pages. The issue is that the logic for determining the descriptors needed is ((S) >> (X)) + 1. When X is 12 it means that we were indicating that we required 2 descriptors for each 4K page when we only needed one. This change corrects this by instead adding (1 << (X)) - 1 to the S value instead of adding 1 after the fact. This way we get an accurate descriptor needed count as we are essentially doing a DIV_ROUNDUP(). Reported-by: Ivan Suzdal <isuzdal@mirantis.com> Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-06i40e: fix errant PCIe bandwidth messageJesse Brandeburg1-0/+1
There was an error introduced with commit 3fced535079a ("i40e: X722 is on the IOSF bus and does not report the PCI bus info"), where code was added but the enabling flag is never set. CC: Anjali Singhai Jain <anjali.singhai@intel.com> CC: Stefan Assman <sassman@redhat.com> Fixes: 3fced535079a ("i40e: X722 is on the IOSF bus ...") Reported-by: Steve Best <sbest@redhat.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds44-455/+574
Pull networking fixes from David Miller: 1) Missing device reference in IPSEC input path results in crashes during device unregistration. From Subash Abhinov Kasiviswanathan. 2) Per-queue ISR register writes not being done properly in macb driver, from Cyrille Pitchen. 3) Stats accounting bugs in bcmgenet, from Patri Gynther. 4) Lightweight tunnel's TTL and TOS were swapped in netlink dumps, from Quentin Armitage. 5) SXGBE driver has off-by-one in probe error paths, from Rasmus Villemoes. 6) Fix race in save/swap/delete options in netfilter ipset, from Vishwanath Pai. 7) Ageing time of bridge not set properly when not operating over a switchdev device. Fix from Haishuang Yan. 8) Fix GRO regression wrt nested FOU/GUE based tunnels, from Alexander Duyck. 9) IPV6 UDP code bumps wrong stats, from Eric Dumazet. 10) FEC driver should only access registers that actually exist on the given chipset, fix from Fabio Estevam. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits) net: mvneta: fix changing MTU when using per-cpu processing stmmac: fix MDIO settings Revert "stmmac: Fix 'eth0: No PHY found' regression" stmmac: fix TX normal DESC net: mvneta: use cache_line_size() to get cacheline size net: mvpp2: use cache_line_size() to get cacheline size net: mvpp2: fix maybe-uninitialized warning tun, bpf: fix suspicious RCU usage in tun_{attach, detach}_filter net: usb: cdc_ncm: adding Telit LE910 V2 mobile broadband card rtnl: fix msg size calculation in if_nlmsg_size() fec: Do not access unexisting register in Coldfire net: mvneta: replace MVNETA_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES net: mvpp2: replace MVPP2_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES net: dsa: mv88e6xxx: Clear the PDOWN bit on setup net: dsa: mv88e6xxx: Introduce _mv88e6xxx_phy_page_{read, write} bpf: make padding in bpf_tunnel_key explicit ipv6: udp: fix UDP_MIB_IGNOREDMULTI updates bnxt_en: Fix ethtool -a reporting. bnxt_en: Fix typo in bnxt_hwrm_set_pause_common(). bnxt_en: Implement proper firmware message padding. ...
2016-04-01net: mvneta: fix changing MTU when using per-cpu processingMarcin Wojtas1-14/+16
After enabling per-cpu processing it appeared that under heavy load changing MTU can result in blocking all port's interrupts and transmitting data is not possible after the change. This commit fixes above issue by disabling percpu interrupts for the time, when TXQs and RXQs are reconfigured. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01stmmac: fix MDIO settingsGiuseppe CAVALLARO3-47/+72
Initially the phy_bus_name was added to manipulate the driver name but it was recently just used to manage the fixed-link and then to take some decision at run-time. So the patch uses the is_pseudo_fixed_link and removes the phy_bus_name variable not necessary anymore. The driver can manage the mdio registration by using phy-handle, dwmac-mdio and own parameter e.g. snps,phy-addr. This patch takes care about all these possible configurations and fixes the mdio registration in case of there is a real transceiver or a switch (that needs to be managed by using fixed-link). Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Tested-by: Frank Schäfer <fschaefer.oss@googlemail.com> Cc: Gabriel Fernandez <gabriel.fernandez@linaro.org> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Phil Reid <preid@electromag.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01Revert "stmmac: Fix 'eth0: No PHY found' regression"Giuseppe CAVALLARO2-9/+11
This reverts commit 88f8b1bb41c6208f81b6a480244533ded7b59493. due to problems on GeekBox and Banana Pi M1 board when connected to a real transceiver instead of a switch via fixed-link. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Gabriel Fernandez <gabriel.fernandez@linaro.org> Cc: Andreas Färber <afaerber@suse.de> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01stmmac: fix TX normal DESCGiuseppe CAVALLARO1-8/+8
This patch fixs a regression raised when test on chips that use the normal descriptor layout. In fact, no len bits were set for the TDES1 and no OWN bit inside the TDES0. Signed-off-by: Giuseppe CAVALLARO <peppe.cavallaro@st.com> Tested-by: Andreas Färber <afaerber@suse.de> Cc: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01net: mvneta: use cache_line_size() to get cacheline sizeJisheng Zhang1-1/+1
L1_CACHE_BYTES may not be the real cacheline size, use cache_line_size to determine the cacheline size in runtime. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Suggested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01net: mvpp2: use cache_line_size() to get cacheline sizeJisheng Zhang1-1/+1
L1_CACHE_BYTES may not be the real cacheline size, use cache_line_size to determine the cacheline size in runtime. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Suggested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01net: mvpp2: fix maybe-uninitialized warningJisheng Zhang1-1/+3
This is to fix the following maybe-uninitialized warning: drivers/net/ethernet/marvell/mvpp2.c:6007:18: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01tun, bpf: fix suspicious RCU usage in tun_{attach, detach}_filterDaniel Borkmann1-3/+5
Sasha Levin reported a suspicious rcu_dereference_protected() warning found while fuzzing with trinity that is similar to this one: [ 52.765684] net/core/filter.c:2262 suspicious rcu_dereference_protected() usage! [ 52.765688] other info that might help us debug this: [ 52.765695] rcu_scheduler_active = 1, debug_locks = 1 [ 52.765701] 1 lock held by a.out/1525: [ 52.765704] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff816a64b7>] rtnl_lock+0x17/0x20 [ 52.765721] stack backtrace: [ 52.765728] CPU: 1 PID: 1525 Comm: a.out Not tainted 4.5.0+ #264 [...] [ 52.765768] Call Trace: [ 52.765775] [<ffffffff813e488d>] dump_stack+0x85/0xc8 [ 52.765784] [<ffffffff810f2fa5>] lockdep_rcu_suspicious+0xd5/0x110 [ 52.765792] [<ffffffff816afdc2>] sk_detach_filter+0x82/0x90 [ 52.765801] [<ffffffffa0883425>] tun_detach_filter+0x35/0x90 [tun] [ 52.765810] [<ffffffffa0884ed4>] __tun_chr_ioctl+0x354/0x1130 [tun] [ 52.765818] [<ffffffff8136fed0>] ? selinux_file_ioctl+0x130/0x210 [ 52.765827] [<ffffffffa0885ce3>] tun_chr_ioctl+0x13/0x20 [tun] [ 52.765834] [<ffffffff81260ea6>] do_vfs_ioctl+0x96/0x690 [ 52.765843] [<ffffffff81364af3>] ? security_file_ioctl+0x43/0x60 [ 52.765850] [<ffffffff81261519>] SyS_ioctl+0x79/0x90 [ 52.765858] [<ffffffff81003ba2>] do_syscall_64+0x62/0x140 [ 52.765866] [<ffffffff817d563f>] entry_SYSCALL64_slow_path+0x25/0x25 Same can be triggered with PROVE_RCU (+ PROVE_RCU_REPEATEDLY) enabled from tun_attach_filter() when user space calls ioctl(tun_fd, TUN{ATTACH, DETACH}FILTER, ...) for adding/removing a BPF filter on tap devices. Since the fix in f91ff5b9ff52 ("net: sk_{detach|attach}_filter() rcu fixes") sk_attach_filter()/sk_detach_filter() now dereferences the filter with rcu_dereference_protected(), checking whether socket lock is held in control path. Since its introduction in 994051625981 ("tun: socket filter support"), tap filters are managed under RTNL lock from __tun_chr_ioctl(). Thus the sock_owned_by_user(sk) doesn't apply in this specific case and therefore triggers the false positive. Extend the BPF API with __sk_attach_filter()/__sk_detach_filter() pair that is used by tap filters and pass in lockdep_rtnl_is_held() for the rcu_dereference_protected() checks instead. Reported-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01net: usb: cdc_ncm: adding Telit LE910 V2 mobile broadband cardDaniele Palmas1-0/+7
Telit LE910 V2 is a mobile broadband card with no ARP capabilities: the patch makes this device to use wwan_noarp_info struct Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Reviewed-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-31fec: Do not access unexisting register in ColdfireFabio Estevam1-1/+1
Commit 55cd48c821de ("net: fec: stop the "rcv is not +last, " error messages") introduces a write to a register that does not exist in Coldfire. Move the FEC_FTRL register access inside the FEC_QUIRK_HAS_RACC 'if' block, so that we guarantee it will not be used on Coldfire CPUs. Reported-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-31net: mvneta: replace MVNETA_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTESJisheng Zhang1-9/+1
The mvneta is also used in some Marvell berlin family SoCs which may have 64bytes cacheline size. Replace the MVNETA_CPU_D_CACHE_LINE_SIZE usage with L1_CACHE_BYTES. And since dma_alloc_coherent() is always cacheline size aligned, so remove the align checks. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-31net: mvpp2: replace MVPP2_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTESJisheng Zhang1-13/+1
The mvpp2 ip maybe used in SoCs which may have have 64bytes cacheline size. Replace the MVPP2_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES. And since dma_alloc_coherent() is always cacheline size aligned, so remove the align checks. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-31net: dsa: mv88e6xxx: Clear the PDOWN bit on setupPatrick Uiterwijk2-0/+44
Some of the vendor-specific bootloaders set up this part of the initialization for us, so this was never added. However, since upstream bootloaders don't initialize the chip specifically, they leave the fiber MII's PDOWN flag set, which means that the CPU port doesn't connect. This patch checks whether this flag has been clear prior by something else, and if not make us clear it. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Patrick Uiterwijk <patrick@puiterwijk.org> Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-31net: dsa: mv88e6xxx: Introduce _mv88e6xxx_phy_page_{read, write}Patrick Uiterwijk1-13/+36
Add versions of the phy_page_read and _write functions to be used in a context where the SMI mutex is held. Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Patrick Uiterwijk <patrick@puiterwijk.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-31Merge branch '10GbE' of ↵David S. Miller9-121/+107
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2016-03-29 This series contains fixes to ixgbe and ixgbevf. Tushar fixes an issue which was introduced with an earlier commit, where hardware register RAR0 default MAC address does not get set properly. Alex fixes two issues, first being the VXLAN port number should be stored in network order instead of in host order. The second fix corrects the ATR code to handle IPv6 extension headers. The issue was ATR code was assuming that it would be able to use tcp_hdr for every TCP frame that came through, but that is not the case, which resulted in bad filters being setup. Mark fixes a use of usleep_range() to udelay() in the case where a lock is being held. Stefan fixes the offline self tests where ndo_stop() should be used instead of ndo_close(), which causes IFF_UP to be cleared and interface routes get removed. Emil fixes the error case where we need to return an error when a MAC address change is rejected by the PF. This helps prevent the user from modifying the MAC address when the operation is not permitted. Sridhar provides three fixes for ixgbe, all dealing with traffic class offload handling. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-31bnxt_en: Fix ethtool -a reporting.Michael Chan1-4/+2
To report flow control tx/rx settings accurately regardless of autoneg setting, we should use link_info->req_flow_ctrl. Before this patch, the reported settings were only correct when autoneg was on. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-31bnxt_en: Fix typo in bnxt_hwrm_set_pause_common().Michael Chan1-1/+1
The typo caused the wrong flow control bit to be set. Reported by: Ajit Khaparde <ajit.khaparde@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-31bnxt_en: Implement proper firmware message padding.Michael Chan2-1/+7
The size of every padded firmware message is specified in the first HWRM_VER_GET response message. Use this value to pad every message after that. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-31bnxt_en: Initialize CP doorbell value before ring allocationPrashant Sreedharan1-1/+1
The existing code does the following: allocate completion ring initialize completion ring doorbell disable interrupts on this completion ring by writing to the doorbell We can have a race where firmware sends an asynchronous event to the host after completion ring allocation and before doorbell is initialized. When this happens driver can crash while ringing the doorbell using uninitialized value as part of handling the IRQ/napi request. Signed-off-by: Prashant Sreedharan <prashant.sreedharan@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-31team: team should sync the port's uc/mc addrs when add a portXin Long1-0/+5
There is an issue when we use mavtap over team: When we replug nic links from team0, the real nics's mc list will not include the maddr for macvtap any more. then we can't receive pkts to macvtap device, as they are filterred by mc list of nic. In Bonding Driver, it syncs the uc/mc addrs in bond_enslave(). We will fix this issue on team by adding the port's uc/mc addrs sync in team_port_add. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-30qed: initialize return rc to avoid returning garbageColin Ian King1-1/+1
in the case where qed_slowpath_irq_req is not called, rc is not assigned and so qed_int_igu_enable will return a garbage value. Fix this by initializing rc to 0. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-30ixgbe: Fix cls_u32 offload support for L4 portsSridhar Samudrala1-12/+4
Fix support for 16 bit source/dest port matches in ixgbe model. u32 uses a single 32-bit key value for both source and destination ports starting at offset 0. So replace the 2 functions with a single function that takes this key value/mask to program both source and dest ports. Verified with the following filter: #tc qdisc add dev p4p1 ingress #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 1: u32 divisor 1 #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:10 u32 ht 800: link 1: \ offset at 0 mask 0f00 shift 6 plus 0 eat match ip protocol 6 ff #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 1:0:10 u32 ht 1: \ match tcp src 1024 ffff match tcp dst 80 ffff action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 1:0:11 u32 ht 1: \ match tcp src 1025 ffff action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 1:0:12 u32 ht 1: \ match tcp dst 81 ffff action drop Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-03-30ixgbe: Fix cls_u32 offload support for fields with masksSridhar Samudrala2-7/+5
Remove the incorrect check for mask in ixgbe_configure_clsu32 and drop the 'mask' field that is not required in struct ixgbe_mat_field Verified with the following filters: #tc qdisc add dev p4p1 ingress #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:1 u32 ht 800: \ match ip dst 10.0.0.1/8 match ip src 10.0.0.2/8 action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:2 u32 ht 800: \ match ip dst 11.0.0.1/16 match ip src 11.0.0.2/16 action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:3 u32 ht 800: \ match ip dst 12.0.0.1/24 match ip src 12.0.0.2/24 action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:4 u32 ht 800: \ match ip dst 13.0.0.1/32 match ip src 13.0.0.2/32 action drop Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-03-30ixgbe: fix error handling in TC cls_u32 offload routinesSridhar Samudrala1-18/+34
Check for handle ids when adding/deleting hash nodes OR adding/deleting filter entries and limit them to max number of links or header nodes supported(IXGBE_MAX_LINK_HANDLE). Start from bit 0 when setting hash table bit-map.(adapter->tables) Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-03-30ixgbe: make __ixgbe_setup_tc staticEmil Tantilov1-2/+2
This function is only used in ixgbe_main.c Resolves a "missing prototype" warning when building the driver with W=1 Reported-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-03-30ixgbevf: fix error code path when setting MAC addressEmil Tantilov2-5/+11
Return error when a MAC address change is rejected by the PF. This will prevent the user from modifying the MAC address when that operation is not permitted. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-03-30ixgbevf: call ndo_stop() instead of dev_close() when running offline selftestStefan Assmann3-4/+6
Calling dev_close() causes IFF_UP to be cleared which will remove the interfaces routes and some addresses. That's probably not what the user intended when running the offline selftest. Besides this does not happen if the interface is brought down before the test, so the current behaviour is inconsistent. Instead call the net_device_ops ndo_stop function directly and avoid touching IFF_UP at all. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-03-30ixgbe: call ndo_stop() instead of dev_close() when running offline selftestStefan Assmann3-4/+6
Calling dev_close() causes IFF_UP to be cleared which will remove the interfaces routes and some addresses. That's probably not what the user intended when running the offline selftest. Besides this does not happen if the interface is brought down before the test, so the current behaviour is inconsistent. Instead call the net_device_ops ndo_stop function directly and avoid touching IFF_UP at all. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-03-30ixgbe: Use udelay to avoid sleeping while atomicMark Rustad1-1/+1
Use udelay instead of usleep_range because this can be called while a lock is held. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-03-30ixgbe: Fix ATR so that it correctly handles IPv6 extension headersAlexander Duyck1-24/+21
The ATR code was assuming that it would be able to use tcp_hdr for every TCP frame that came through. However this isn't the case as it is possible for a frame to arrive that is TCP but sent through something like a raw socket. As a result the driver was setting up bad filters in which tcp_hdr was really pointing to the network header so the data was all invalid. In order to correct this I have added a bit of parsing logic that will determine the TCP header location based off of the network header and either the offset in the case of the IPv4 header, or a walk through the IPv6 extension headers until it encounters the header that indicates IPPROTO_TCP. In addition I have added checks to verify that the lowest protocol provided is recognized as IPv4 or IPv6 to help mitigate raw sockets using ETH_P_ALL from having ATR applied to them. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-03-30ixgbe: Store VXLAN port number in network orderAlexander Duyck2-49/+20
The VXLAN port number should be stored in network order instead of in host order as it is accessed from the hot-path in ATR. This way we can avoid having to do any byte swaps in order to validate the port number. I moved the vxlan_port value into a hole in the read-mostly region of the adapter struct. This way it should be in a warm cache-line instead of in some isolated region in memory when it needs to be accessed. In addition I went through and stripped a bunch of unneeded ifdef flags since having an extra variable present doesn't really hurt anything and makes the code easier to read. I also went through and dropped the NETIF_F_RXCSUM flag which was being set in hw_encap_features but provides no value as the flag is not evaluated in the Rx path. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-03-30ixgbe: Fix for RAR0 not being set to default MAC addrTushar Dave1-0/+2
commit c9f53e63c208 ("ixgbe: Refactor MAC address configuration code") introduced code that doesn't set HW register RAR0 to default mac address but FF:FF:FF:FF:FF:FF. Due to this, ixgbe HW discards all incoming packets that doesn't have destination mac address equals to FF:FF:FF:FF:FF:FF. This commit sets RAR0 correctly to default HW mac address. Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Tested-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-03-29qmi_wwan: add "D-Link DWM-221 B1" device idBjørn Mork1-0/+1
Thomas reports: "Windows: 00 diagnostics 01 modem 02 at-port 03 nmea 04 nic Linux: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=7e19 Rev=02.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage" Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-28net: macb: Only call GPIO functions if there is a valid GPIOCharles Keepax1-3/+5
GPIOlib will print warning messages if we call GPIO functions without a valid GPIO. Change the code to avoid doing so. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-28net: hns: set-coalesce-usecs returns errno by dsaf.koLisheng3-6/+8
It may fail to set coalesce usecs to HW, and Ethtool needs to know if it is successful to cfg the parameter or not. So it needs return the errno by dsaf.ko. Signed-off-by: Lisheng <lisheng011@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-28net: hns: fixed the setting and getting overtime bugLisheng4-154/+126
The overtime setting and getting REGs in HNS V2 is defferent from HNS V1. It needs to be distinguished between them if getting or setting the REGs. Signed-off-by: Lisheng <lisheng011@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-28ravb: fix software timestampingLino Sanfilippo1-1/+1
In ravb_start_xmit dont call skb_tx_timestamp only when hardware timestamping is requested: in the latter case software timestamps are suppressed and thus the call of skb_tx_timestamp does not have any effect. Instead call skb_tx_timestamp unconditionally in ravb_start_xmit, since the function checks itself if software timestamping is required or should be skipped due to hardware timestamping. Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-28net: sxgbe: fix error paths in sxgbe_platform_probe()Rasmus Villemoes1-2/+2
We need to use post-decrement to ensure that irq_dispose_mapping is also called on priv->rxq[0]->irq_no; moreover, if one of the above for loops failed already at i==0 (so we reach one of these labels with that value of i), we'll enter an essentially infinite loop of out-of-bounds accesses. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-28drivers/net/usb/plusb.c: Fix typoDiego Viola1-1/+1
Signed-off-by: Diego Viola <diego.viola@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-25net: macb: remove BUG_ON() and reset the queue to handle RX errorsCyrille Pitchen1-10/+49
This patch removes two BUG_ON() used to notify about RX queue corruptions on macb (not gem) hardware without actually handling the error. The new code skips corrupted frames but still processes faultless frames. Then it resets the RX queue before restarting the reception from a clean state. This patch is a rework of an older patch proposed by Neil Armstrong: http://patchwork.ozlabs.org/patch/371525/ Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-25qlge: Update version to 1.00.00.35Manish Chopra1-1/+1
Just updating version as many fixes got accumulated over 1.00.00.34 Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-17 02:22:44 +0300