summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2019-11-12can: flexcan: disable completely the ECC mechanismJoakim Zhang1-0/+1
[ Upstream commit 5e269324db5adb2f5f6ec9a93a9c7b0672932b47 ] The ECC (memory error detection and correction) mechanism can be activated or not, controlled by the ECCDIS bit in CAN_MECR. When disabled, updates on indications and reporting registers are stopped. So if want to disable ECC completely, had better assert ECCDIS bit, not just mask the related interrupts. Fixes: cdce844865be ("can: flexcan: add vf610 support for FlexCAN") Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-12e1000: fix memory leaksWenwen Wang1-4/+3
[ Upstream commit 8472ba62154058b64ebb83d5f57259a352d28697 ] In e1000_set_ringparam(), 'tx_old' and 'rx_old' are not deallocated if e1000_up() fails, leading to memory leaks. Refactor the code to fix this issue. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-12igb: Fix constant media auto sense switching when no cable is connectedManfred Rudigier1-1/+2
[ Upstream commit 8d5cfd7f76a2414e23c74bb8858af7540365d985 ] At least on the i350 there is an annoying behavior that is maybe also present on 82580 devices, but was probably not noticed yet as MAS is not widely used. If no cable is connected on both fiber/copper ports the media auto sense code will constantly swap between them as part of the watchdog task and produce many unnecessary kernel log messages. The swap code responsible for this behavior (switching to fiber) should not be executed if the current media type is copper and there is no signal detected on the fiber port. In this case we can safely wait until the AUTOSENSE_EN bit is cleared. Signed-off-by: Manfred Rudigier <manfred.rudigier@omicronenergy.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-12net: ethernet: arc: add the missed clk_disable_unprepareChuhong Yuan1-0/+3
[ Upstream commit 4202e219edd6cc164c042e16fa327525410705ae ] The remove misses to disable and unprepare priv->macclk like what is done when probe fails. Add the missed call in remove. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-12hv_netvsc: Fix error handling in netvsc_attach()Haiyang Zhang1-1/+8
[ Upstream commit 719b85c336ed35565d0f3982269d6f684087bb00 ] If rndis_filter_open() fails, we need to remove the rndis device created in earlier steps, before returning an error code. Otherwise, the retry of netvsc_attach() from its callers will fail and hang. Fixes: 7b2ee50c0cd5 ("hv_netvsc: common detach logic") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-12net: hisilicon: Fix "Trying to free already-free IRQ"Jiangfeng Xiao1-1/+0
[ Upstream commit 63a41746827cb16dc6ad0d4d761ab4e7dda7a0c3 ] When rmmod hip04_eth.ko, we can get the following warning: Task track: rmmod(1623)>bash(1591)>login(1581)>init(1) ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1623 at kernel/irq/manage.c:1557 __free_irq+0xa4/0x2ac() Trying to free already-free IRQ 200 Modules linked in: ping(O) pramdisk(O) cpuinfo(O) rtos_snapshot(O) interrupt_ctrl(O) mtdblock mtd_blkdevrtfs nfs_acl nfs lockd grace sunrpc xt_tcpudp ipt_REJECT iptable_filter ip_tables x_tables nf_reject_ipv CPU: 0 PID: 1623 Comm: rmmod Tainted: G O 4.4.193 #1 Hardware name: Hisilicon A15 [<c020b408>] (rtos_unwind_backtrace) from [<c0206624>] (show_stack+0x10/0x14) [<c0206624>] (show_stack) from [<c03f2be4>] (dump_stack+0xa0/0xd8) [<c03f2be4>] (dump_stack) from [<c021a780>] (warn_slowpath_common+0x84/0xb0) [<c021a780>] (warn_slowpath_common) from [<c021a7e8>] (warn_slowpath_fmt+0x3c/0x68) [<c021a7e8>] (warn_slowpath_fmt) from [<c026876c>] (__free_irq+0xa4/0x2ac) [<c026876c>] (__free_irq) from [<c0268a14>] (free_irq+0x60/0x7c) [<c0268a14>] (free_irq) from [<c0469e80>] (release_nodes+0x1c4/0x1ec) [<c0469e80>] (release_nodes) from [<c0466924>] (__device_release_driver+0xa8/0x104) [<c0466924>] (__device_release_driver) from [<c0466a80>] (driver_detach+0xd0/0xf8) [<c0466a80>] (driver_detach) from [<c0465e18>] (bus_remove_driver+0x64/0x8c) [<c0465e18>] (bus_remove_driver) from [<c02935b0>] (SyS_delete_module+0x198/0x1e0) [<c02935b0>] (SyS_delete_module) from [<c0202ed0>] (__sys_trace_return+0x0/0x10) ---[ end trace bb25d6123d849b44 ]--- Currently "rmmod hip04_eth.ko" call free_irq more than once as devres_release_all and hip04_remove both call free_irq. This results in a 'Trying to free already-free IRQ' warning. To solve the problem free_irq has been moved out of hip04_remove. Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-12fjes: Handle workqueue allocation failureWill Deacon1-1/+14
[ Upstream commit 85ac30fa2e24f628e9f4f9344460f4015d33fd7d ] In the highly unlikely event that we fail to allocate either of the "/txrx" or "/control" workqueues, we should bail cleanly rather than blindly march on with NULL queue pointer(s) installed in the 'fjes_adapter' instance. Cc: "David S. Miller" <davem@davemloft.net> Reported-by: Nicolas Waisman <nico@semmle.com> Link: https://lore.kernel.org/lkml/CADJ_3a8WFrs5NouXNqS5WYe7rebFP+_A5CheeqAyD_p7DFJJcg@mail.gmail.com/ Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-12macsec: fix refcnt leak in module exit routineTaehee Yoo1-4/+0
[ Upstream commit 2bce1ebed17da54c65042ec2b962e3234bad5b47 ] When a macsec interface is created, it increases a refcnt to a lower device(real device). when macsec interface is deleted, the refcnt is decreased in macsec_free_netdev(), which is ->priv_destructor() of macsec interface. The problem scenario is this. When nested macsec interfaces are exiting, the exit routine of the macsec module makes refcnt leaks. Test commands: ip link add dummy0 type dummy ip link add macsec0 link dummy0 type macsec ip link add macsec1 link macsec0 type macsec modprobe -rv macsec [ 208.629433] unregister_netdevice: waiting for macsec0 to become free. Usage count = 1 Steps of exit routine of macsec module are below. 1. Calls ->dellink() in __rtnl_link_unregister(). 2. Checks refcnt and wait refcnt to be 0 if refcnt is not 0 in netdev_run_todo(). 3. Calls ->priv_destruvtor() in netdev_run_todo(). Step2 checks refcnt, but step3 decreases refcnt. So, step2 waits forever. This patch makes the macsec module do not hold a refcnt of the lower device because it already holds a refcnt of the lower device with netdev_upper_dev_link(). Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-12bonding: fix unexpected IFF_BONDING bit unsetTaehee Yoo1-2/+4
[ Upstream commit 65de65d9033750d2cf1b336c9d6e9da3a8b5cc6e ] The IFF_BONDING means bonding master or bonding slave device. ->ndo_add_slave() sets IFF_BONDING flag and ->ndo_del_slave() unsets IFF_BONDING flag. bond0<--bond1 Both bond0 and bond1 are bonding device and these should keep having IFF_BONDING flag until they are removed. But bond1 would lose IFF_BONDING at ->ndo_del_slave() because that routine do not check whether the slave device is the bonding type or not. This patch adds the interface type check routine before removing IFF_BONDING flag. Test commands: ip link add bond0 type bond ip link add bond1 type bond ip link set bond1 master bond0 ip link set bond1 nomaster ip link del bond1 type bond ip link add bond1 type bond Splat looks like: [ 226.665555] proc_dir_entry 'bonding/bond1' already registered [ 226.666440] WARNING: CPU: 0 PID: 737 at fs/proc/generic.c:361 proc_register+0x2a9/0x3e0 [ 226.667571] Modules linked in: bonding af_packet sch_fq_codel ip_tables x_tables unix [ 226.668662] CPU: 0 PID: 737 Comm: ip Not tainted 5.4.0-rc3+ #96 [ 226.669508] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 226.670652] RIP: 0010:proc_register+0x2a9/0x3e0 [ 226.671612] Code: 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 39 01 00 00 48 8b 04 24 48 89 ea 48 c7 c7 a0 0b 14 9f 48 8b b0 e 0 00 00 00 e8 07 e7 88 ff <0f> 0b 48 c7 c7 40 2d a5 9f e8 59 d6 23 01 48 8b 4c 24 10 48 b8 00 [ 226.675007] RSP: 0018:ffff888050e17078 EFLAGS: 00010282 [ 226.675761] RAX: dffffc0000000008 RBX: ffff88805fdd0f10 RCX: ffffffff9dd344e2 [ 226.676757] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88806c9f6b8c [ 226.677751] RBP: ffff8880507160f3 R08: ffffed100d940019 R09: ffffed100d940019 [ 226.678761] R10: 0000000000000001 R11: ffffed100d940018 R12: ffff888050716008 [ 226.679757] R13: ffff8880507160f2 R14: dffffc0000000000 R15: ffffed100a0e2c1e [ 226.680758] FS: 00007fdc217cc0c0(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 226.681886] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 226.682719] CR2: 00007f49313424d0 CR3: 0000000050e46001 CR4: 00000000000606f0 [ 226.683727] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 226.684725] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 226.685681] Call Trace: [ 226.687089] proc_create_seq_private+0xb3/0xf0 [ 226.687778] bond_create_proc_entry+0x1b3/0x3f0 [bonding] [ 226.691458] bond_netdev_event+0x433/0x970 [bonding] [ 226.692139] ? __module_text_address+0x13/0x140 [ 226.692779] notifier_call_chain+0x90/0x160 [ 226.693401] register_netdevice+0x9b3/0xd80 [ 226.694010] ? alloc_netdev_mqs+0x854/0xc10 [ 226.694629] ? netdev_change_features+0xa0/0xa0 [ 226.695278] ? rtnl_create_link+0x2ed/0xad0 [ 226.695849] bond_newlink+0x2a/0x60 [bonding] [ 226.696422] __rtnl_newlink+0xb9f/0x11b0 [ 226.696968] ? rtnl_link_unregister+0x220/0x220 [ ... ] Fixes: 0b680e753724 ("[PATCH] bonding: Add priv_flag to avoid event mishandling") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-12net/mlx5: prevent memory leak in mlx5_fpga_conn_create_cqNavid Emamdoost1-1/+3
[ Upstream commit c8c2a057fdc7de1cd16f4baa51425b932a42eb39 ] In mlx5_fpga_conn_create_cq if mlx5_vector2eqn fails the allocated memory should be released. Fixes: 537a50574175 ("net/mlx5: FPGA, Add high-speed connection routines") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-12can: peak_usb: fix slab info leakJohan Hovold1-1/+1
commit f7a1337f0d29b98733c8824e165fca3371d7d4fd upstream. Fix a small slab info leak due to a failure to clear the command buffer at allocation. The first 16 bytes of the command buffer are always sent to the device in pcan_usb_send_cmd() even though only the first two may have been initialised in case no argument payload is provided (e.g. when waiting for a response). Fixes: bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core") Cc: stable <stable@vger.kernel.org> # 3.4 Reported-by: syzbot+863724e7128e14b26732@syzkaller.appspotmail.com Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-12can: mcba_usb: fix use-after-free on disconnectJohan Hovold1-2/+1
commit 4d6636498c41891d0482a914dd570343a838ad79 upstream. The driver was accessing its driver data after having freed it. Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer") Cc: stable <stable@vger.kernel.org> # 4.12 Cc: Remigiusz Kołłątaj <remigiusz.kollataj@mobica.com> Reported-by: syzbot+e29b17e5042bbc56fae9@syzkaller.appspotmail.com Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-12can: gs_usb: gs_can_open(): prevent memory leakNavid Emamdoost1-0/+1
commit fb5be6a7b4863ecc44963bb80ca614584b6c7817 upstream. In gs_can_open() if usb_submit_urb() fails the allocated urb should be released. Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-12can: rx-offload: can_rx_offload_queue_sorted(): fix error handling, avoid ↵Marc Kleine-Budde1-2/+4
skb mem leak commit ca913f1ac024559ebc17f0b599af262f0ad997c9 upstream. If the rx-offload skb_queue is full can_rx_offload_queue_sorted() will not queue the skb and return with an error. None of the callers of this function, issue a kfree_skb() to free the not queued skb. This results in a memory leak. This patch fixes the problem by freeing the skb in case of a full queue. The return value is adjusted to -ENOBUFS to better reflect the actual problem. The device stats handling is left to the callers, as this function might be used in both the rx and tx path. Fixes: 55059f2b7f86 ("can: rx-offload: introduce can_rx_offload_get_echo_skb() and can_rx_offload_queue_sorted() functions") Cc: linux-stable <stable@vger.kernel.org> Cc: Martin Hundebøll <martin@geanix.com> Reported-by: Martin Hundebøll <martin@geanix.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-12can: peak_usb: fix a potential out-of-sync while decoding packetsStephane Grosjean1-5/+12
commit de280f403f2996679e2607384980703710576fed upstream. When decoding a buffer received from PCAN-USB, the first timestamp read in a packet is a 16-bit coded time base, and the next ones are an 8-bit offset to this base, regardless of the type of packet read. This patch corrects a potential loss of synchronization by using a timestamp index read from the buffer, rather than an index of received data packets, to determine on the sizeof the timestamp to be read from the packet being decoded. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Fixes: 46be265d3388 ("can: usb: PEAK-System Technik PCAN-USB specific part") Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-12can: c_can: c_can_poll(): only read status register after status IRQKurt Van Dijck2-5/+21
commit 3cb3eaac52c0f145d895f4b6c22834d5f02b8569 upstream. When the status register is read without the status IRQ pending, the chip may not raise the interrupt line for an upcoming status interrupt and the driver may miss a status interrupt. It is critical that the BUSOFF status interrupt is forwarded to the higher layers, since no more interrupts will follow without intervention. Thanks to Wolfgang and Joe for bringing up the first idea. Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Joe Burmeister <joe.burmeister@devtank.co.uk> Fixes: fa39b54ccf28 ("can: c_can: Get rid of pointless interrupts") Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-12can: usb_8dev: fix use-after-free on disconnectJohan Hovold1-2/+1
commit 3759739426186a924675651b388d1c3963c5710e upstream. The driver was accessing its driver data after having freed it. Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices") Cc: stable <stable@vger.kernel.org> # 3.9 Cc: Bernd Krumboeck <b.krumboeck@gmail.com> Cc: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-12qede: fix NULL pointer deref in __qede_remove()Manish Chopra1-2/+10
[ Upstream commit deabc87111c690097c03765ea017cd500f7376fc ] While rebooting the system with SR-IOV vfs enabled leads to below crash due to recurrence of __qede_remove() on the VF devices (first from .shutdown() flow of the VF itself and another from PF's .shutdown() flow executing pci_disable_sriov()) This patch adds a safeguard in __qede_remove() flow to fix this, so that driver doesn't attempt to remove "already removed" devices. [ 194.360134] BUG: unable to handle kernel NULL pointer dereference at 00000000000008dc [ 194.360227] IP: [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede] [ 194.360304] PGD 0 [ 194.360325] Oops: 0000 [#1] SMP [ 194.360360] Modules linked in: tcp_lp fuse tun bridge stp llc devlink bonding ip_set nfnetlink ib_isert iscsi_target_mod ib_srpt target_core_mod ib_srp scsi_transport_srp scsi_tgt ib_ipoib ib_umad rpcrdma sunrpc rdma_ucm ib_uverbs ib_iser rdma_cm iw_cm ib_cm libiscsi scsi_transport_iscsi dell_smbios iTCO_wdt iTCO_vendor_support dell_wmi_descriptor dcdbas vfat fat pcc_cpufreq skx_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd qedr ib_core pcspkr ses enclosure joydev ipmi_ssif sg i2c_i801 lpc_ich mei_me mei wmi ipmi_si ipmi_devintf ipmi_msghandler tpm_crb acpi_pad acpi_power_meter xfs libcrc32c sd_mod crc_t10dif crct10dif_generic crct10dif_pclmul crct10dif_common crc32c_intel mgag200 [ 194.361044] qede i2c_algo_bit drm_kms_helper qed syscopyarea sysfillrect nvme sysimgblt fb_sys_fops ttm nvme_core mpt3sas crc8 ptp drm pps_core ahci raid_class scsi_transport_sas libahci libata drm_panel_orientation_quirks nfit libnvdimm dm_mirror dm_region_hash dm_log dm_mod [last unloaded: ip_tables] [ 194.361297] CPU: 51 PID: 7996 Comm: reboot Kdump: loaded Not tainted 3.10.0-1062.el7.x86_64 #1 [ 194.361359] Hardware name: Dell Inc. PowerEdge MX840c/0740HW, BIOS 2.4.6 10/15/2019 [ 194.361412] task: ffff9cea9b360000 ti: ffff9ceabebdc000 task.ti: ffff9ceabebdc000 [ 194.361463] RIP: 0010:[<ffffffffc03553c4>] [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede] [ 194.361534] RSP: 0018:ffff9ceabebdfac0 EFLAGS: 00010282 [ 194.361570] RAX: 0000000000000000 RBX: ffff9cd013846098 RCX: 0000000000000000 [ 194.361621] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9cd013846098 [ 194.361668] RBP: ffff9ceabebdfae8 R08: 0000000000000000 R09: 0000000000000000 [ 194.361715] R10: 00000000bfe14201 R11: ffff9ceabfe141e0 R12: 0000000000000000 [ 194.361762] R13: ffff9cd013846098 R14: 0000000000000000 R15: ffff9ceab5e48000 [ 194.361810] FS: 00007f799c02d880(0000) GS:ffff9ceacb0c0000(0000) knlGS:0000000000000000 [ 194.361865] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 194.361903] CR2: 00000000000008dc CR3: 0000001bdac76000 CR4: 00000000007607e0 [ 194.361953] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 194.362002] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 194.362051] PKRU: 55555554 [ 194.362073] Call Trace: [ 194.362109] [<ffffffffc0355500>] qede_remove+0x10/0x20 [qede] [ 194.362180] [<ffffffffb97d0f3e>] pci_device_remove+0x3e/0xc0 [ 194.362240] [<ffffffffb98b3c52>] __device_release_driver+0x82/0xf0 [ 194.362285] [<ffffffffb98b3ce3>] device_release_driver+0x23/0x30 [ 194.362343] [<ffffffffb97c86d4>] pci_stop_bus_device+0x84/0xa0 [ 194.362388] [<ffffffffb97c87e2>] pci_stop_and_remove_bus_device+0x12/0x20 [ 194.362450] [<ffffffffb97f153f>] pci_iov_remove_virtfn+0xaf/0x160 [ 194.362496] [<ffffffffb97f1aec>] sriov_disable+0x3c/0xf0 [ 194.362534] [<ffffffffb97f1bc3>] pci_disable_sriov+0x23/0x30 [ 194.362599] [<ffffffffc02f83c3>] qed_sriov_disable+0x5e3/0x650 [qed] [ 194.362658] [<ffffffffb9622df6>] ? kfree+0x106/0x140 [ 194.362709] [<ffffffffc02cc0c0>] ? qed_free_stream_mem+0x70/0x90 [qed] [ 194.362754] [<ffffffffb9622df6>] ? kfree+0x106/0x140 [ 194.362803] [<ffffffffc02cd659>] qed_slowpath_stop+0x1a9/0x1d0 [qed] [ 194.362854] [<ffffffffc035544e>] __qede_remove+0xae/0x130 [qede] [ 194.362904] [<ffffffffc03554e0>] qede_shutdown+0x10/0x20 [qede] [ 194.362956] [<ffffffffb97cf90a>] pci_device_shutdown+0x3a/0x60 [ 194.363010] [<ffffffffb98b180b>] device_shutdown+0xfb/0x1f0 [ 194.363066] [<ffffffffb94b66c6>] kernel_restart_prepare+0x36/0x40 [ 194.363107] [<ffffffffb94b66e2>] kernel_restart+0x12/0x60 [ 194.363146] [<ffffffffb94b6959>] SYSC_reboot+0x229/0x260 [ 194.363196] [<ffffffffb95f200d>] ? handle_mm_fault+0x39d/0x9b0 [ 194.363253] [<ffffffffb942b621>] ? __switch_to+0x151/0x580 [ 194.363304] [<ffffffffb9b7ec28>] ? __schedule+0x448/0x9c0 [ 194.363343] [<ffffffffb94b69fe>] SyS_reboot+0xe/0x10 [ 194.363387] [<ffffffffb9b8bede>] system_call_fastpath+0x25/0x2a [ 194.363430] Code: f9 e9 37 ff ff ff 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 4c 8d af 98 00 00 00 41 54 4c 89 ef 41 89 f4 53 e8 4c e4 55 f9 <80> b8 dc 08 00 00 01 48 89 c3 4c 8d b8 c0 08 00 00 4c 8b b0 c0 [ 194.363712] RIP [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede] [ 194.363764] RSP <ffff9ceabebdfac0> [ 194.363791] CR2: 00000000000008dc Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Sudarsana Kalluru <skalluru@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-12net: usb: qmi_wwan: add support for DW5821e with eSIM supportAleksander Morgado1-0/+1
[ Upstream commit e497df686e8fed8c1dd69179010656362858edb3 ] Exactly same layout as the default DW5821e module, just a different vid/pid. The QMI interface is exposed in USB configuration #1: P: Vendor=413c ProdID=81e0 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5821e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-12net: qualcomm: rmnet: Fix potential UAF when unregisteringSean Tranchetti1-2/+2
[ Upstream commit e7a86c687e64ab24f88330ad24ecc9442ce40c5a ] During the exit/unregistration process of the RmNet driver, the function rmnet_unregister_real_device() is called to handle freeing the driver's internal state and removing the RX handler on the underlying physical device. However, the order of operations this function performs is wrong and can lead to a use after free of the rmnet_port structure. Before calling netdev_rx_handler_unregister(), this port structure is freed with kfree(). If packets are received on any RmNet devices before synchronize_net() completes, they will attempt to use this already-freed port structure when processing the packet. As such, before cleaning up any other internal state, the RX handler must be unregistered in order to guarantee that no further packets will arrive on the device. Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by: Sean Tranchetti <stranche@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-12net: ethernet: octeon_mgmt: Account for second possible VLAN headerAlexander Sverdlin1-1/+1
[ Upstream commit e4dd5608033efe7b6030cde359bfdbaeb73bc22d ] Octeon's input ring-buffer entry has 14 bits-wide size field, so to account for second possible VLAN header max_mtu must be further reduced. Fixes: 109cc16526c6d ("ethernet/cavium: use core min/max MTU checking") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-12CDC-NCM: handle incomplete transfer of MTUOliver Neukum1-3/+3
[ Upstream commit 332f989a3b0041b810836c5c3747e59aad7e9d0b ] A malicious device may give half an answer when asked for its MTU. The driver will proceed after this with a garbage MTU. Anything but a complete answer must be treated as an error. V2: used sizeof as request by Alexander Reported-and-tested-by: syzbot+0631d878823ce2411636@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-12bonding: fix state transition issue in link monitoringJay Vosburgh1-21/+20
[ Upstream commit 1899bb325149e481de31a4f32b59ea6f24e176ea ] Since de77ecd4ef02 ("bonding: improve link-status update in mii-monitoring"), the bonding driver has utilized two separate variables to indicate the next link state a particular slave should transition to. Each is used to communicate to a different portion of the link state change commit logic; one to the bond_miimon_commit function itself, and another to the state transition logic. Unfortunately, the two variables can become unsynchronized, resulting in incorrect link state transitions within bonding. This can cause slaves to become stuck in an incorrect link state until a subsequent carrier state transition. The issue occurs when a special case in bond_slave_netdev_event sets slave->link directly to BOND_LINK_FAIL. On the next pass through bond_miimon_inspect after the slave goes carrier up, the BOND_LINK_FAIL case will set the proposed next state (link_new_state) to BOND_LINK_UP, but the new_link to BOND_LINK_DOWN. The setting of the final link state from new_link comes after that from link_new_state, and so the slave will end up incorrectly in _DOWN state. Resolve this by combining the two variables into one. Reported-by: Aleksei Zakharov <zakharov.a.g@yandex.ru> Reported-by: Sha Zhang <zhangsha.zhang@huawei.com> Cc: Mahesh Bandewar <maheshb@google.com> Fixes: de77ecd4ef02 ("bonding: improve link-status update in mii-monitoring") Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-10vxlan: check tun_info options_len properlyXin Long1-1/+4
[ Upstream commit eadf52cf1852196a1363044dcda22fa5d7f296f7 ] This patch is to improve the tun_info options_len by dropping the skb when TUNNEL_VXLAN_OPT is set but options_len is less than vxlan_metadata. This can void a potential out-of-bounds access on ip_tun_info. Fixes: ee122c79d422 ("vxlan: Flow based tunneling") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-10net: bcmgenet: reset 40nm EPHY on energy detectDoug Berger1-2/+7
[ Upstream commit 25382b991d252aed961cd434176240f9de6bb15f ] The EPHY integrated into the 40nm Set-Top Box devices can falsely detect energy when connected to a disabled peer interface. When the peer interface is enabled the EPHY will detect and report the link as active, but on occasion may get into a state where it is not able to exchange data with the connected GENET MAC. This issue has not been observed when the link parameters are auto-negotiated; however, it has been observed with a manually configured link. It has been empirically determined that issuing a soft reset to the EPHY when energy is detected prevents it from getting into this bad state. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-10r8152: add device id for Lenovo ThinkPad USB-C Dock Gen 2Kazutoshi Noguchi2-0/+8
[ Upstream commit b3060531979422d5bb18d80226f978910284dc70 ] This device is sold as 'ThinkPad USB-C Dock Gen 2 (40AS)'. Chipset is RTL8153 and works with r8152. Without this, the generic cdc_ether grabs the device, and the device jam connected networks up when the machine suspends. Signed-off-by: Kazutoshi Noguchi <noguchi.kazutosi@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-10net: usb: lan78xx: Connect PHY before registering MACAndrew Lunn1-6/+6
[ Upstream commit 38b4fe320119859c11b1dc06f6b4987a16344fa1 ] As soon as the netdev is registers, the kernel can start using the interface. If the driver connects the MAC to the PHY after the netdev is registered, there is a race condition where the interface can be opened without having the PHY connected. Change the order to close this race condition. Fixes: 92571a1aae40 ("lan78xx: Connect phy early") Reported-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-10net: dsa: b53: Do not clear existing mirrored port maskFlorian Fainelli1-1/+0
[ Upstream commit c763ac436b668d7417f0979430ec0312ede4093d ] Clearing the existing bitmask of mirrored ports essentially prevents us from capturing more than one port at any given time. This is clearly wrong, do not clear the bitmask prior to setting up the new port. Reported-by: Hubert Feurstein <h.feurstein@gmail.com> Fixes: ed3af5fd08eb ("net: dsa: b53: Add support for port mirroring") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-10net/mlx5e: Fix handling of compressed CQEs in case of low NAPI budgetMaxim Mikityanskiy1-1/+4
[ Upstream commit 9df86bdb6746d7fcfc2fda715f7a7c3d0ddb2654 ] When CQE compression is enabled, compressed CQEs use the following structure: a title is followed by one or many blocks, each containing 8 mini CQEs (except the last, which may contain fewer mini CQEs). Due to NAPI budget restriction, a complete structure is not always parsed in one NAPI run, and some blocks with mini CQEs may be deferred to the next NAPI poll call - we have the mlx5e_decompress_cqes_cont call in the beginning of mlx5e_poll_rx_cq. However, if the budget is extremely low, some blocks may be left even after that, but the code that follows the mlx5e_decompress_cqes_cont call doesn't check it and assumes that a new CQE begins, which may not be the case. In such cases, random memory corruptions occur. An extremely low NAPI budget of 8 is used when busy_poll or busy_read is active. This commit adds a check to make sure that the previous compressed CQE has been completely parsed after mlx5e_decompress_cqes_cont, otherwise it prevents a new CQE from being fetched in the middle of a compressed CQE. This commit fixes random crashes in __build_skb, __page_pool_put_page and other not-related-directly places, that used to happen when both CQE compression and busy_poll/busy_read were enabled. Fixes: 7219ab34f184 ("net/mlx5e: CQE compression") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-10net/mlx4_core: Dynamically set guaranteed amount of counters per VFEran Ben Elisha1-16/+26
[ Upstream commit e19868efea0c103f23b4b7e986fd0a703822111f ] Prior to this patch, the amount of counters guaranteed per VF in the resource tracker was MLX4_VF_COUNTERS_PER_PORT * MLX4_MAX_PORTS. It was set regardless if the VF was single or dual port. This caused several VFs to have no guaranteed counters although the system could satisfy their request. The fix is to dynamically guarantee counters, based on each VF specification. Fixes: 9de92c60beaa ("net/mlx4_core: Adjust counter grant policy in the resource tracker") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-10net: hisilicon: Fix ping latency when deal with high throughputJiangfeng Xiao1-6/+9
[ Upstream commit e56bd641ca61beb92b135298d5046905f920b734 ] This is due to error in over budget processing. When dealing with high throughput, the used buffers that exceeds the budget is not cleaned up. In addition, it takes a lot of cycles to clean up the used buffer, and then the buffer where the valid data is located can take effect. Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-10net: ethernet: ftgmac100: Fix DMA coherency issue with SW checksumBenjamin Herrenschmidt1-13/+12
[ Upstream commit 88824e3bf29a2fcacfd9ebbfe03063649f0f3254 ] We are calling the checksum helper after the dma_map_single() call to map the packet. This is incorrect as the checksumming code will touch the packet from the CPU. This means the cache won't be properly flushes (or the bounce buffering will leave us with the unmodified packet to DMA). This moves the calculation of the checksum & vlan tags to before the DMA mapping. This also has the side effect of fixing another bug: If the checksum helper fails, we goto "drop" to drop the packet, which will not unmap the DMA mapping. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Fixes: 05690d633f30 ("ftgmac100: Upgrade to NETIF_F_HW_CSUM") Reviewed-by: Vijay Khemka <vijaykhemka@fb.com> Tested-by: Vijay Khemka <vijaykhemka@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-10net: dsa: bcm_sf2: Fix IMP setup for port different than 8Florian Fainelli1-15/+21
[ Upstream commit 5fc0f21246e50afdf318b5a3a941f7f4f57b8947 ] Since it became possible for the DSA core to use a CPU port different than 8, our bcm_sf2_imp_setup() function was broken because it assumes that registers are applicable to port 8. In particular, the port's MAC is going to stay disabled, so make sure we clear the RX_DIS and TX_DIS bits if we are not configured for port 8. Fixes: 9f91484f6fcc ("net: dsa: make "label" property optional for dsa2") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-10cxgb4: fix panic when attaching to ULD failVishal Kulkarni1-12/+17
[ Upstream commit fc89cc358fb64e2429aeae0f37906126636507ec ] Release resources when attaching to ULD fail. Otherwise, data mismatch is seen between LLD and ULD later on, which lead to kernel panic when accessing resources that should not even exist in the first place. Fixes: 94cdb8bb993a ("cxgb4: Add support for dynamic allocation of resources for ULD") Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-06net: usb: sr9800: fix uninitialized local variableValentin Vidic1-1/+1
commit 77b6d09f4ae66d42cd63b121af67780ae3d1a5e9 upstream. Make sure res does not contain random value if the call to sr_read_cmd fails for some reason. Reported-by: syzbot+f1842130bbcfb335bac1@syzkaller.appspotmail.com Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-06bonding: fix potential NULL deref in bond_update_slave_arrEric Dumazet1-1/+1
commit a7137534b597b7c303203e6bc3ed87e87a273bb8 upstream. syzbot got a NULL dereference in bond_update_slave_arr() [1], happening after a failure to allocate bond->slave_arr A workqueue (bond_slave_arr_handler) is supposed to retry the allocation later, but if the slave is removed before the workqueue had a chance to complete, bond->slave_arr can still be NULL. [1] Failed to build slave-array. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI Modules linked in: Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:bond_update_slave_arr.cold+0xc6/0x198 drivers/net/bonding/bond_main.c:4039 RSP: 0018:ffff88018fe33678 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc9000290b000 RDX: 0000000000000000 RSI: ffffffff82b63037 RDI: ffff88019745ea20 RBP: ffff88018fe33760 R08: ffff880170754280 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff88019745ea00 R14: 0000000000000000 R15: ffff88018fe338b0 FS: 00007febd837d700(0000) GS:ffff8801dad00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004540a0 CR3: 00000001c242e005 CR4: 00000000001626f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: [<ffffffff82b5b45e>] __bond_release_one+0x43e/0x500 drivers/net/bonding/bond_main.c:1923 [<ffffffff82b5b966>] bond_release drivers/net/bonding/bond_main.c:2039 [inline] [<ffffffff82b5b966>] bond_do_ioctl+0x416/0x870 drivers/net/bonding/bond_main.c:3562 [<ffffffff83ae25f4>] dev_ifsioc+0x6f4/0x940 net/core/dev_ioctl.c:328 [<ffffffff83ae2e58>] dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:495 [<ffffffff83995ffd>] sock_do_ioctl+0x1bd/0x300 net/socket.c:1088 [<ffffffff83996a80>] sock_ioctl+0x300/0x5d0 net/socket.c:1196 [<ffffffff81b124db>] vfs_ioctl fs/ioctl.c:47 [inline] [<ffffffff81b124db>] file_ioctl fs/ioctl.c:501 [inline] [<ffffffff81b124db>] do_vfs_ioctl+0xacb/0x1300 fs/ioctl.c:688 [<ffffffff81b12dc6>] SYSC_ioctl fs/ioctl.c:705 [inline] [<ffffffff81b12dc6>] SyS_ioctl+0xb6/0xe0 fs/ioctl.c:696 [<ffffffff8101ccc8>] do_syscall_64+0x528/0x770 arch/x86/entry/common.c:305 [<ffffffff84400091>] entry_SYSCALL_64_after_hwframe+0x42/0xb7 Fixes: ee6377147409 ("bonding: Simplify the xmit function for modes that use xmit_hash") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-06rtlwifi: Fix potential overflow on P2P codeLaura Abbott1-0/+6
commit 8c55dedb795be8ec0cf488f98c03a1c2176f7fb1 upstream. Nicolas Waisman noticed that even though noa_len is checked for a compatible length it's still possible to overrun the buffers of p2pinfo since there's no check on the upper bound of noa_num. Bound noa_num against P2P_MAX_NOA_NUM. Reported-by: Nicolas Waisman <nico@semmle.com> Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-06ath6kl: fix a NULL-ptr-deref bug in ath6kl_usb_alloc_urb_from_pipe()Hui Peng1-0/+8
[ Upstream commit 39d170b3cb62ba98567f5c4f40c27b5864b304e5 ] The `ar_usb` field of `ath6kl_usb_pipe_usb_pipe` objects are initialized to point to the containing `ath6kl_usb` object according to endpoint descriptors read from the device side, as shown below in `ath6kl_usb_setup_pipe_resources`: for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { endpoint = &iface_desc->endpoint[i].desc; // get the address from endpoint descriptor pipe_num = ath6kl_usb_get_logical_pipe_num(ar_usb, endpoint->bEndpointAddress, &urbcount); ...... // select the pipe object pipe = &ar_usb->pipes[pipe_num]; // initialize the ar_usb field pipe->ar_usb = ar_usb; } The driver assumes that the addresses reported in endpoint descriptors from device side to be complete. If a device is malicious and does not report complete addresses, it may trigger NULL-ptr-deref `ath6kl_usb_alloc_urb_from_pipe` and `ath6kl_usb_free_urb_to_pipe`. This patch fixes the bug by preventing potential NULL-ptr-deref (CVE-2019-15098). Signed-off-by: Hui Peng <benquike@gmail.com> Reported-by: Hui Peng <benquike@gmail.com> Reported-by: Mathias Payer <mathias.payer@nebelwelt.net> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-06mlxsw: spectrum: Set LAG port collector only when activeNir Dotan1-17/+45
[ Upstream commit 48ebab31d424fbdb8ede8914923bec671a933246 ] The LAG port collecting (receive) function was mistakenly set when the port was registered as a LAG member, while it should be set only when the port collection state is set to true. Set LAG port to collecting when it is set to distributing, as described in the IEEE link aggregation standard coupled control mux machine state diagram. Signed-off-by: Nir Dotan <nird@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-29xen/netback: fix error path of xenvif_connect_data()Juergen Gross1-1/+0
commit 3d5c1a037d37392a6859afbde49be5ba6a70a6b3 upstream. xenvif_connect_data() calls module_put() in case of error. This is wrong as there is no related module_get(). Remove the superfluous module_put(). Fixes: 279f438e36c0a7 ("xen-netback: Don't destroy the netdev until the vif is shut down") Cc: <stable@vger.kernel.org> # 3.12 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Paul Durrant <paul@xen.org> Reviewed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-29net: stmmac: disable/enable ptp_ref_clk in suspend/resume flowBiao Huang1-4/+8
[ Upstream commit e497c20e203680aba9ccf7bb475959595908ca7e ] disable ptp_ref_clk in suspend flow, and enable it in resume flow. Fixes: f573c0b9c4e0 ("stmmac: move stmmac_clk, pclk, clk_ptp_ref and stmmac_rst to platform structure") Signed-off-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-29net: i82596: fix dma_alloc_attr for sni_82596Thomas Bogendoerfer3-4/+8
[ Upstream commit 61c1d33daf7b5146f44d4363b3322f8cda6a6c43 ] Commit 7f683b920479 ("i825xx: switch to switch to dma_alloc_attrs") switched dma allocation over to dma_alloc_attr, but didn't convert the SNI part to request consistent DMA memory. This broke sni_82596 since driver doesn't do dma_cache_sync for performance reasons. Fix this by using different DMA_ATTRs for lasi_82596 and sni_82596. Fixes: 7f683b920479 ("i825xx: switch to switch to dma_alloc_attrs") Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-29net: bcmgenet: Set phydev->dev_flags only for internal PHYsFlorian Fainelli1-2/+3
[ Upstream commit 92696286f3bb37ba50e4bd8d1beb24afb759a799 ] phydev->dev_flags is entirely dependent on the PHY device driver which is going to be used, setting the internal GENET PHY revision in those bits only makes sense when drivers/net/phy/bcm7xxx.c is the PHY driver being used. Fixes: 487320c54143 ("net: bcmgenet: communicate integrated PHY revision to PHY driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-29net: bcmgenet: Fix RGMII_MODE_EN value for GENET v1/2/3Florian Fainelli2-1/+6
[ Upstream commit efb86fede98cdc70b674692ff617b1162f642c49 ] The RGMII_MODE_EN bit value was 0 for GENET versions 1 through 3, and became 6 for GENET v4 and above, account for that difference. Fixes: aa09677cba42 ("net: bcmgenet: add MDIO routines") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-29r8152: Set macpassthru in reset_resume callbackKai-Heng Feng1-2/+1
[ Upstream commit a54cdeeb04fc719e4c7f19d6e28dba7ea86cee5b ] r8152 may fail to establish network connection after resume from system suspend. If the USB port connects to r8152 lost its power during system suspend, the MAC address was written before is lost. The reason is that The MAC address doesn't get written again in its reset_resume callback. So let's set MAC address again in reset_resume callback. Also remove unnecessary lock as no other locking attempt will happen during reset_resume. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-29net: hisilicon: Fix usage of uninitialized variable in function ↵Yizhuo1-1/+5
mdio_sc_cfg_reg_write() [ Upstream commit 53de429f4e88f538f7a8ec2b18be8c0cd9b2c8e1 ] In function mdio_sc_cfg_reg_write(), variable "reg_value" could be uninitialized if regmap_read() fails. However, "reg_value" is used to decide the control flow later in the if statement, which is potentially unsafe. Signed-off-by: Yizhuo <yzhai003@ucr.edu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-29net: dsa: qca8k: Use up to 7 ports for all operationsMichal Vokáč1-2/+2
[ Upstream commit 7ae6d93c8f052b7a77ba56ed0f654e22a2876739 ] The QCA8K family supports up to 7 ports. So use the existing QCA8K_NUM_PORTS define to allocate the switch structure and limit all operations with the switch ports. This was not an issue until commit 0394a63acfe2 ("net: dsa: enable and disable all ports") disabled all unused ports. Since the unused ports 7-11 are outside of the correct register range on this switch some registers were rewritten with invalid content. Fixes: 6b93fb46480a ("net-next: dsa: add new driver for qca8xxx family") Fixes: a0c02161ecfc ("net: dsa: variable number of ports") Fixes: 0394a63acfe2 ("net: dsa: enable and disable all ports") Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-29ieee802154: ca8210: prevent memory leakNavid Emamdoost1-1/+1
[ Upstream commit 6402939ec86eaf226c8b8ae00ed983936b164908 ] In ca8210_probe the allocated pdata needs to be assigned to spi_device->dev.platform_data before calling ca8210_get_platform_data. Othrwise when ca8210_get_platform_data fails pdata cannot be released. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Link: https://lore.kernel.org/r/20190917224713.26371-1-navid.emamdoost@gmail.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-11ieee802154: atusb: fix use-after-free at disconnectJohan Hovold1-1/+2
commit 7fd25e6fc035f4b04b75bca6d7e8daa069603a76 upstream. The disconnect callback was accessing the hardware-descriptor private data after having having freed it. Fixes: 7490b008d123 ("ieee802154: add support for atusb transceiver") Cc: stable <stable@vger.kernel.org> # 4.2 Cc: Alexander Aring <alex.aring@gmail.com> Reported-by: syzbot+f4509a9138a1472e7e80@syzkaller.appspotmail.com Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-11can: mcp251x: mcp251x_hw_reset(): allow more time after a resetMarc Kleine-Budde1-5/+14
commit d84ea2123f8d27144e3f4d58cd88c9c6ddc799de upstream. Some boards take longer than 5ms to power up after a reset, so allow some retries attempts before giving up. Fixes: ff06d611a31c ("can: mcp251x: Improve mcp251x_hw_reset()") Cc: linux-stable <stable@vger.kernel.org> Tested-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-01 00:19:17 +0300