summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2008-01-29iwlwifi: move uCode API definitions to iwl-4965-commands.hBen Cahill2-37/+39
Move uCode API definitions to iwl-4965-commands.h Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29iwlwifi: clean up unused definitions in iwl-4965-hw.hBen Cahill1-392/+3
Clean up unused definitions in iwl-4965-hw.h Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29iwlwifi: Clean up unused definitions in iwl-3945-hw.hBen Cahill1-129/+1
Clean up unused definitions in iwl-3945-hw.h Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29iwlwifi: add comments to iwl*-base.cCahill, Ben M2-71/+356
Add comments to iwlXXXX-base.c Signed-off-by: Cahill, Ben M <ben.m.cahill@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29iwlwifi: add comments, mostly on Tx queuesCahill, Ben M2-39/+231
Add comments, mostly on Tx queues Signed-off-by: Cahill, Ben M <ben.m.cahill@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29iwlwifi: clean up some unused definitions in iwl-4965.h and iwl-3945.hBen Cahill3-47/+8
Clean up some unused definitions in iwl-4965.h and iwl-3945.h Move STA_FLG_ definitions to iwl-4965-commands.h Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29iwlwifi: Partially clean-up, add comments to iwl-*-hw.hBen Cahill2-47/+97
Partially clean-up, add comments to iwl-XXXX-hw.h Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29iwlwifi: Document Rx calibrationBen Cahill3-25/+261
Document Rx calibration Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29iwlwifi: Document 4965 rate_n_flags bitsBen Cahill2-36/+92
Document 4965 rate_n_flags bits Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29iwlwifi: Add comments to some driver data structuresBen Cahill2-11/+82
Add comments to some driver data structures Remove unused "sched_retry" member from struct iwl3945_tx_queue Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29iwlwifi: Move is_legacy() macro family from iwl-4965-hw.h to iwl-4965-rs.hBen Cahill2-7/+7
Move is_legacy() macro family from iwl-4965-hw.h to iwl-4965-rs.h These macros are for driver's rate scaling implementation, and are not related to hardware or uCode API values (moved from iwl-4965-hw.h). Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29iwlwifi: clean up and clarify some comments after 3945/4965 splitBen Cahill4-173/+132
Clean up and clarify some comments after 3945/4965 split. Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29iwl-4965-hw.h: clean up unused eeprom structures and definitionsBen Cahill1-57/+1
Clean up unused eeprom structures and definitions in iwl-4965-hw.h. Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29iwlwifi: add comments to EEPROM stuffBen Cahill4-36/+285
Add comments to EEPROM stuff. Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29iwl4965: add comments to rate scaling codeBen Cahill4-75/+442
Add comments to rate scaling code. Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29iwl3945: re-align 3945 event log dataBen Cahill1-1/+1
Re-align 3945 event log data. Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29iwlwifi: continue namespace changes - fix CONFIG variablesReinette Chatre4-28/+3
- Remove HT code from iwl-3945.h - it is not needed here as 3945 does not support HT. The code ended up here during the header file split. - Modify a few places where the CONFIG variables were named incorrectly: all changes are to comments only. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29iwlwifi: Support for uCode without init and bsm sectionTomas Winkler2-130/+112
This patch enables loading fw w/o init and bsm section. It also provides general cleanup of the rutine. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29rt2x00: Release rt2x00 2.0.13Ivo van Doorn1-1/+1
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29rt2x00: Cleanup rfkillIvo van Doorn1-4/+0
The label exit_free_polldev is no longer used and can be removed. input_free_polled_device() also calls input_free_device(), so don't call it seperatly. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29rt2x00: Remove redundant code in rfkill setupLarry Finger1-6/+0
In rt2x00rfkill.c, routine input_allocate_device() is called even though input_allocate_polled_device(), which was just called, includes a call to that routine. This patch, which has not been tested, removes the redundant code. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29rt2x00: Only update rssi average approximation on receiving beacon frames.Mattias Nissler2-1/+25
Restrict rssi average updating to beacon frames of the bssid the interface is associated with. Without this restriction, strong signals belonging to other BSS, e.g. beacon frames coming from a nearby AP, would cause incorrectly high rssi approximation values. This would then cause the link tuner to reduce sensitivity, resulting in transmissions from the BSS associated to to be missed. Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29rt2x00: Use IEEE80211_IF_TYPE_INVALID directlyIvo van Doorn3-4/+2
No need to use a seperate define INVALID_INTERFACE while we can use IEEE80211_IF_TYPE_INVALID directly. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29rt2x00: Add TX/RX frame dumping facilityIvo van Doorn7-10/+337
This adds TX/RX frame dumping capabilities through debugfs. The intention is that with this approach debugging of rt2x00 is simplified since _all_ frames going in and out of the device are send to debugfs as well along with additional information like the hardware descriptor. Based on the patch by Mattias Nissler. Mattias also has some tools that will make the dumped frames available to wireshark: http://www-user.rhrk.uni-kl.de/~nissler/rt2x00/ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29rt2x00: Add skb descriptorIvo van Doorn8-73/+174
Use the skb->cb field to add a frame description that can be used to transfer information passed each rt2x00 layer. This reduces the required arguments for rt2x00lib_write_tx_desc(). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-29rt2x00: Add chipset version to chipset debugfs entryIvo van Doorn1-3/+8
The chipset debugfs entry already indicates it is about the chipset, it only makes sense to also display the chipset version in there. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29rt2x00: Move register value/offset files into new folderIvo van Doorn1-17/+25
Cleanup debugfs interface by moving the csr/bbp/rf/eeprom value/offset entries into the "register" folder. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29rt2x00: Extend PLCP descriptor definition for rt2400pciIvo van Doorn2-33/+27
Extend word field definitions for the PLCP words in the TX descriptor to contain the BBP fields as well. This will remove rt2400pci_write_tx_desc() from the checkstack script. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29rt2x00: Replace DRV_NAME with KBUILD_MODNAMEIvo van Doorn14-77/+11
DRV_NAME was always set to the KBUILD_MODNAME value, lets clean everything up by removing DRV_NAME and just use KBUILD_MODNAME directly. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29b43legacy: reinit on too many PHY TX errorsStefano Brivio2-1/+19
Restart the hardware on too many PHY TX errors. A thousand PHY TX errors per 15 seconds means we won't be able to recover for sure. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29b43legacy: include full 64-bit timestamp in monitor modeJohannes Berg2-0/+4
When monitor mode is enabled, this will make b43legacy read out the full 64-bit MAC time from the chip for each received packet. This patch has been ported from b43. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29b43legacy: properly fix a bogus gcc warningFrank Lichtenheld1-1/+1
Use initialized_var() to properly fix a bogus gcc warning. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Cc: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29b43: Changes to enable BCM4311 rev 02 with wireless core revision 13Larry Finger3-10/+26
The BCM94311MCG rev 02 chip has an 802.11 core with revision 13 and has not been supported until now. The changes include the following: (1) Add the 802.11 rev 13 device to the ssb_device_id table to load b43. (2) Add PHY revision 9 to the supported list. (3) Change the 2-bit routing code for address extensions to 0b10 rather than the 0b01 used for the 32-bit case. (4) Remove some magic numbers in the DMA setup. The DMA implementation for this chip supports full 64-bit addressing with one exception. Whenever the Descriptor Ring Buffer is in high memory, a fatal DMA error occurs. This problem was not present in 2.6.24-rc2 due to code to "Bias the placement of kernel pages at lower PFNs". When commit 44048d70 reverted that code, the DMA error appeared. As a "fix", use the GFP_DMA flag when allocating the buffer for 64-bit DMA. At present, this problem is thought to arise from a hardware error. This patch has been tested on my system and by Cédric Caumont <icare40@hotmail.com>. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29b43: reinit on too many PHY TX errorsStefano Brivio2-1/+21
Restart the hardware on too many PHY TX errors. A thousand PHY TX errors per 15 seconds means we won't be able to recover for sure. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29b43: include FCS in frames handed to mac80211Johannes Berg2-2/+2
Sometimes it can be useful to see the FCS, especially when bad-FCS frames are shown. Pass the FCS to mac80211 and let it worry about snipping it off when required. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29b43: include full 64-bit timestamp in monitor modeJohannes Berg2-0/+4
When monitor mode is enabled, this will make b43 read out the full 64-bit MAC time from the chip for each received packet. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: less eventcause shiftsHolger Schurig2-28/+35
* only shift eventcause once * convert mac events to decimal, as this is what the firmware manual uses in section 6.1, too Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: remove user-specified channel listHolger Schurig4-122/+13
Remove the ability to specify channels to scan via debugfs Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: remove numprobesHolger Schurig4-53/+11
Remove the ability to specify number of probes via debugfs Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: tweak tx path debuggingHolger Schurig1-4/+4
Make two functions in the TX packet path emit their debug messages with LBS_DEB_TX, not LBS_DEB_MAIN. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: tweak association debug outputHolger Schurig3-43/+28
Change debug output codes from LBS_DEB_JOIN to LBS_DEB_ASSOC Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: rework event subscriptionHolger Schurig6-901/+278
This patch moves re-works the implementation of event subscription via debugfs. For this: * it tells cmd.c and cmdresp.c about CMD_802_11_SUBSCRIBE_EVENT * removes lots of low-level cmd stuff from debugfs.c * create unified functions to read/write snr, rssi, bcnmiss and failcount * introduces #define's for subscription event bitmask values * add a function to search for a specific element in an IE (a.k.a. TLV) * add a function to find out the size of the TLV. This is needed because lbs_prepare_and_send_command() has an argument for a data buffer, but not for it's lengths and TLVs can be, by definition, vary in size. * fix a bug where it was not possible to disable an event Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: remove arbitrary typedefsHolger Schurig23-565/+606
New typedefs are usually frowned upon. This patch changes libertas_adapter -> struct libertas_adapter libertas_priv -> struct libertas_priv While passing, make everything checkpatch.pl-clean that gets touches. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: configurable beacon intervalBrajesh Dave6-1/+61
Requires firmware version 5.110.19.p0 or newer, available here: http://dev.laptop.org/pub/firmware/libertas/ Signed-off-by: Ashish Shukla <ashishs@marvell.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: separate mesh connectivity from that of the main interfaceBrajesh Dave9-36/+47
The transmit and receive traffic as soon as the mesh interface is brought up. Test case 1: Bring up only the mesh interface and ping. No need for any iwconfig commands on the main interface. $ ifconfig msh0 192.168.5.3 $ iwconfig msh0 channel X $ ping 192.168.5.2 If ping succeeds, PASS Test case 2: Associate with the main interface, and turn off AP. Mesh interface should not lose connectivity. $ iwconfig eth0 mode managed essid "my_ssid" $ ifconfig msh0 192.168.5.3 $ ping 192.168.5.2 <turn off access point> If ping continues uninterrupted, PASS This feature requires firmware version 5.110.19.p0 or newer, available here: http://dev.laptop.org/pub/firmware/libertas/ Signed-off-by: Ashish Shukla <ashishs@marvell.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: nuke useless variable usbdriver_name and useless commentsAndres Salomon1-7/+1
I think it was pretty obvious what fields in if_usb_driver are... Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: reset devices upon disconnect rather than module unloadingAndres Salomon2-25/+4
1) Do not reset libertas devices upon module unload. We're unloading the module, we're not killing off devices. 2) Instead, reset libertas devices inside if_usb_disconnect, as we're killing off interfaces and so on. 3) Resetting via disconnect callback means we no longer need to keep track of probed libertas devices; kill off that list (and its wonderful lack of locking..), as well. Drop a useless comment as well. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: mark module_init/exit functions as __init/__exitAndres Salomon3-6/+6
Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: drop useless default_fw_name variableAndres Salomon1-6/+1
Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29zd1211rw: add copyright noticesDaniel Drake15-14/+77
Requested by Michael Wu. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-28 10:15:39 +0300