| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The fsl_mc_get_endpoint() function uses device_find_child() for
localization, which implicitly calls get_device() to increment the
device's reference count before returning the pointer. However, the
caller dpaa2_eth_connect_mac() fails to properly release this
reference in multiple scenarios. We should call put_device() to
decrement reference count properly.
As comment of device_find_child() says, 'NOTE: you will need to drop
the reference with put_device() after use'.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 719479230893 ("dpaa2-eth: add MAC/PHY support through phylink")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250717022309.3339976-2-make24@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Antonio Quartulli says:
====================
This bugfix batch includes the following changes:
* properly propagate sk mark to skb->mark field
* reject unexpected incoming netlink attributes
* reset GSO state when moving skb from transport to tunnel layer
* tag 'ovpn-net-20250716' of https://github.com/OpenVPN/ovpn-net-next:
ovpn: reset GSO metadata after decapsulation
ovpn: reject unexpected netlink attributes
ovpn: propagate socket mark to skb in UDP
====================
Link: https://patch.msgid.link/20250716115443.16763-1-antonio@openvpn.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The deadlock appears in a stack trace like:
virtnet_probe()
rtnl_lock()
virtio_config_changed_work()
netdev_notify_peers()
rtnl_lock()
It happens if the VMM sends a VIRTIO_NET_S_ANNOUNCE request while the
virtio-net driver is still probing.
The config_work in probe() will get scheduled until virtnet_open() enables
the config change notification via virtio_config_driver_enable().
Fixes: df28de7b0050 ("virtio-net: synchronize operstate with admin state on up/down")
Signed-off-by: Zigit Zo <zuozhijie@bytedance.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20250716115717.1472430-1-zuozhijie@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the upcoming ConnectX-10 device ID to the table of supported
PCI device IDs.
Cc: stable@vger.kernel.org
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1752650969-148501-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
addrconf
Set an additional flag IFF_NO_ADDRCONF to prevent ipv6 addrconf.
Commit under Fixes added a new flag change that was not made
to hv_netvsc resulting in the VF being assinged an IPv6.
Fixes: 8a321cf7becc ("net: add IFF_NO_ADDRCONF and use it in bonding to prevent ipv6 addrconf")
Suggested-by: Cathy Avery <cavery@redhat.com>
Signed-off-by: Li Tian <litian@redhat.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20250716002607.4927-1-litian@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Couple of fixes:
- ath12k performance regression from -rc1
- cfg80211 counted_by() removal for scan request
as it doesn't match usage and keeps complaining
- iwlwifi crash with certain older devices
- iwlwifi missing an error path unlock
- iwlwifi compatibility with certain BIOS updates
* tag 'wireless-2025-07-17' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: Fix botched indexing conversion
wifi: cfg80211: remove scan request n_channels counted_by
wifi: ath12k: Fix packets received in WBM error ring with REO LUT enabled
wifi: iwlwifi: mask reserved bits in chan_state_active_bitmap
wifi: iwlwifi: pcie: fix locking on invalid TOP reset
====================
Link: https://patch.msgid.link/20250717091831.18787-5-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-07-15 (ixgbe, fm10k, i40e, ice)
Arnd Bergmann resolves compile issues with large NR_CPUS for ixgbe, fm10k,
and i40e.
For ice:
Dave adds a NULL check for LAG netdev.
Michal corrects a pointer check in debugfs initialization.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: check correct pointer in fwlog debugfs
ice: add NULL check in eswitch lag check
ethernet: intel: fix building with large NR_CPUS
====================
Link: https://patch.msgid.link/20250715202948.3841437-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
np->name was being used after calling of_node_put(np), which
releases the node and can lead to a use-after-free bug.
Previously, of_node_put(np) was called unconditionally after
of_find_device_by_node(np), which could result in a use-after-free if
pdev is NULL.
This patch moves of_node_put(np) after the error check to ensure
the node is only released after both the error and success cases
are handled appropriately, preventing potential resource issues.
Fixes: 23290c7bc190 ("net: airoha: Introduce Airoha NPU support")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250715143102.3458286-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
gso_size is expected by the networking stack to be the size of the
payload (thus, not including ethernet/IP/TCP-headers). However, cqe_bcnt
is the full sized frame (including the headers). Dividing cqe_bcnt by
lro_num_seg will then give incorrect results.
For example, running a bpftrace higher up in the TCP-stack
(tcp_event_data_recv), we commonly have gso_size set to 1450 or 1451 even
though in reality the payload was only 1448 bytes.
This can have unintended consequences:
- In tcp_measure_rcv_mss() len will be for example 1450, but. rcv_mss
will be 1448 (because tp->advmss is 1448). Thus, we will always
recompute scaling_ratio each time an LRO-packet is received.
- In tcp_gro_receive(), it will interfere with the decision whether or
not to flush and thus potentially result in less gro'ed packets.
So, we need to discount the protocol headers from cqe_bcnt so we can
actually divide the payload by lro_num_seg to get the real gso_size.
v2:
- Use "(unsigned char *)tcp + tcp->doff * 4 - skb->data)" to compute header-len
(Tariq Toukan <tariqt@nvidia.com>)
- Improve commit-message (Gal Pressman <gal@nvidia.com>)
Fixes: e586b3b0baee ("net/mlx5: Ethernet Datapath files")
Signed-off-by: Christoph Paasch <cpaasch@openai.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250715-cpaasch-pf-925-investigate-incorrect-gso_size-on-cx-7-nic-v2-1-e06c3475f3ac@openai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ovpn_netdev_write() function is responsible for injecting
decapsulated and decrypted packets back into the local network stack.
Prior to this patch, the skb could retain GSO metadata from the outer,
encrypted tunnel packet. This original GSO metadata, relevant to the
sender's transport context, becomes invalid and misleading for the
tunnel/data path once the inner packet is exposed.
Leaving this stale metadata intact causes internal GSO validation checks
further down the kernel's network stack (validate_xmit_skb()) to fail,
leading to packet drops. The reasons for these failures vary by
protocol, for example:
- for ICMP, no offload handler is registered;
- for TCP and UDP, the respective offload handlers return errors when
comparing skb->len to the outdated skb_shinfo(skb)->gso_size.
By calling skb_gso_reset(skb) we ensure the inner packet is presented to
gro_cells_receive() with a clean state, correctly indicating it is an
individual packet from the perspective of the local stack.
This change eliminates the "Driver has suspect GRO implementation, TCP
performance may be compromised" warning and improves overall TCP
performance by allowing GSO/GRO to function as intended on the
decapsulated traffic.
Fixes: 11851cbd60ea ("ovpn: implement TCP transport")
Reported-by: Gert Doering <gert@greenie.muc.de>
Closes: https://github.com/OpenVPN/ovpn-net-next/issues/4
Tested-by: Gert Doering <gert@greenie.muc.de>
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
Netlink ops do not expect all attributes to be always set, however
this condition is not explicitly coded any where, leading the user
to believe that all sent attributes are somewhat processed.
Fix this behaviour by introducing explicit checks.
For CMD_OVPN_PEER_GET and CMD_OVPN_KEY_GET directly open-code the
needed condition in the related ops handlers.
While for all other ops use attribute subsets in the ovpn.yaml spec file.
Fixes: b7a63391aa98 ("ovpn: add basic netlink support")
Reported-by: Ralf Lici <ralf@mandelbit.com>
Closes: https://github.com/OpenVPN/ovpn-net-next/issues/19
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
OpenVPN allows users to configure a FW mark on sockets used to
communicate with other peers. The mark is set by means of the
`SO_MARK` Linux socket option.
However, in the ovpn UDP code path, the socket's `sk_mark` value is
currently ignored and it is not propagated to outgoing `skbs`.
This commit ensures proper inheritance of the field by setting
`skb->mark` to `sk->sk_mark` before handing the `skb` to the network
stack for transmission.
Fixes: 08857b5ec5d9 ("ovpn: implement basic TX path (UDP)")
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Link: https://www.mail-archive.com/openvpn-devel@lists.sourceforge.net/msg31877.html
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
Multicast good packets received by PF rings that pass ethternet MAC
address filtering are counted for rtnl_link_stats64.multicast. The
counter is not cleared on read. Fix the duplicate counting on updating
statistics.
Fixes: 46b92e10d631 ("net: libwx: support hardware statistics")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/DA229A4F58B70E51+20250714015656.91772-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When device reset is triggered by feature changes such as toggling Rx
VLAN offload, wx->do_reset() is called to reinitialize Rx rings. The
hardware descriptor ring may retain stale values from previous sessions.
And only set the length to 0 in rx_desc[0] would result in building
malformed SKBs. Fix it to ensure a clean slate after device reset.
[ 549.186435] [ C16] ------------[ cut here ]------------
[ 549.186457] [ C16] kernel BUG at net/core/skbuff.c:2814!
[ 549.186468] [ C16] Oops: invalid opcode: 0000 [#1] SMP NOPTI
[ 549.186472] [ C16] CPU: 16 UID: 0 PID: 0 Comm: swapper/16 Kdump: loaded Not tainted 6.16.0-rc4+ #23 PREEMPT(voluntary)
[ 549.186476] [ C16] Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024
[ 549.186478] [ C16] RIP: 0010:__pskb_pull_tail+0x3ff/0x510
[ 549.186484] [ C16] Code: 06 f0 ff 4f 34 74 7b 4d 8b 8c 24 c8 00 00 00 45 8b 84 24 c0 00 00 00 e9 c8 fd ff ff 48 c7 44 24 08 00 00 00 00 e9 5e fe ff ff <0f> 0b 31 c0 e9 23 90 5b ff 41 f7 c6 ff 0f 00 00 75 bf 49 8b 06 a8
[ 549.186487] [ C16] RSP: 0018:ffffb391c0640d70 EFLAGS: 00010282
[ 549.186490] [ C16] RAX: 00000000fffffff2 RBX: ffff8fe7e4d40200 RCX: 00000000fffffff2
[ 549.186492] [ C16] RDX: ffff8fe7c3a4bf8e RSI: 0000000000000180 RDI: ffff8fe7c3a4bf40
[ 549.186494] [ C16] RBP: ffffb391c0640da8 R08: ffff8fe7c3a4c0c0 R09: 000000000000000e
[ 549.186496] [ C16] R10: ffffb391c0640d88 R11: 000000000000000e R12: ffff8fe7e4d40200
[ 549.186497] [ C16] R13: 00000000fffffff2 R14: ffff8fe7fa01a000 R15: 00000000fffffff2
[ 549.186499] [ C16] FS: 0000000000000000(0000) GS:ffff8fef5ae40000(0000) knlGS:0000000000000000
[ 549.186502] [ C16] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 549.186503] [ C16] CR2: 00007f77d81d6000 CR3: 000000051a032000 CR4: 0000000000750ef0
[ 549.186505] [ C16] PKRU: 55555554
[ 549.186507] [ C16] Call Trace:
[ 549.186510] [ C16] <IRQ>
[ 549.186513] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5
[ 549.186517] [ C16] __skb_pad+0xc7/0xf0
[ 549.186523] [ C16] wx_clean_rx_irq+0x355/0x3b0 [libwx]
[ 549.186533] [ C16] wx_poll+0x92/0x120 [libwx]
[ 549.186540] [ C16] __napi_poll+0x28/0x190
[ 549.186544] [ C16] net_rx_action+0x301/0x3f0
[ 549.186548] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5
[ 549.186551] [ C16] ? __raw_spin_lock_irqsave+0x1e/0x50
[ 549.186554] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5
[ 549.186557] [ C16] ? wake_up_nohz_cpu+0x35/0x160
[ 549.186559] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5
[ 549.186563] [ C16] handle_softirqs+0xf9/0x2c0
[ 549.186568] [ C16] __irq_exit_rcu+0xc7/0x130
[ 549.186572] [ C16] common_interrupt+0xb8/0xd0
[ 549.186576] [ C16] </IRQ>
[ 549.186577] [ C16] <TASK>
[ 549.186579] [ C16] asm_common_interrupt+0x22/0x40
[ 549.186582] [ C16] RIP: 0010:cpuidle_enter_state+0xc2/0x420
[ 549.186585] [ C16] Code: 00 00 e8 11 0e 5e ff e8 ac f0 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 0d ed 5c ff 45 84 ff 0f 85 40 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 84 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d
[ 549.186587] [ C16] RSP: 0018:ffffb391c0277e78 EFLAGS: 00000246
[ 549.186590] [ C16] RAX: ffff8fef5ae40000 RBX: 0000000000000003 RCX: 0000000000000000
[ 549.186591] [ C16] RDX: 0000007fde0faac5 RSI: ffffffff826e53f6 RDI: ffffffff826fa9b3
[ 549.186593] [ C16] RBP: ffff8fe7c3a20800 R08: 0000000000000002 R09: 0000000000000000
[ 549.186595] [ C16] R10: 0000000000000000 R11: 000000000000ffff R12: ffffffff82ed7a40
[ 549.186596] [ C16] R13: 0000007fde0faac5 R14: 0000000000000003 R15: 0000000000000000
[ 549.186601] [ C16] ? cpuidle_enter_state+0xb3/0x420
[ 549.186605] [ C16] cpuidle_enter+0x29/0x40
[ 549.186609] [ C16] cpuidle_idle_call+0xfd/0x170
[ 549.186613] [ C16] do_idle+0x7a/0xc0
[ 549.186616] [ C16] cpu_startup_entry+0x25/0x30
[ 549.186618] [ C16] start_secondary+0x117/0x140
[ 549.186623] [ C16] common_startup_64+0x13e/0x148
[ 549.186628] [ C16] </TASK>
Fixes: 3c47e8ae113a ("net: libwx: Support to receive packets in NAPI")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250714024755.17512-4-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The wx_rx_buffer structure contained two DMA address fields: 'dma' and
'page_dma'. However, only 'page_dma' was actually initialized and used
to program the Rx descriptor. But 'dma' was uninitialized and used in
some paths.
This could lead to undefined behavior, including DMA errors or
use-after-free, if the uninitialized 'dma' was used. Althrough such
error has not yet occurred, it is worth fixing in the code.
Fixes: 3c47e8ae113a ("net: libwx: Support to receive packets in NAPI")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250714024755.17512-3-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
page_pool_put_full_page() should only be invoked when freeing Rx buffers
or building a skb if the size is too short. At other times, the pages
need to be reused. So remove the redundant page put. In the original
code, double free pages cause kernel panic:
[ 876.949834] __irq_exit_rcu+0xc7/0x130
[ 876.949836] common_interrupt+0xb8/0xd0
[ 876.949838] </IRQ>
[ 876.949838] <TASK>
[ 876.949840] asm_common_interrupt+0x22/0x40
[ 876.949841] RIP: 0010:cpuidle_enter_state+0xc2/0x420
[ 876.949843] Code: 00 00 e8 d1 1d 5e ff e8 ac f0 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 cd fc 5c ff 45 84 ff 0f 85 40 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 84 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d
[ 876.949844] RSP: 0018:ffffaa7340267e78 EFLAGS: 00000246
[ 876.949845] RAX: ffff9e3f135be000 RBX: 0000000000000002 RCX: 0000000000000000
[ 876.949846] RDX: 000000cc2dc4cb7c RSI: ffffffff89ee49ae RDI: ffffffff89ef9f9e
[ 876.949847] RBP: ffff9e378f940800 R08: 0000000000000002 R09: 00000000000000ed
[ 876.949848] R10: 000000000000afc8 R11: ffff9e3e9e5a9b6c R12: ffffffff8a6d8580
[ 876.949849] R13: 000000cc2dc4cb7c R14: 0000000000000002 R15: 0000000000000000
[ 876.949852] ? cpuidle_enter_state+0xb3/0x420
[ 876.949855] cpuidle_enter+0x29/0x40
[ 876.949857] cpuidle_idle_call+0xfd/0x170
[ 876.949859] do_idle+0x7a/0xc0
[ 876.949861] cpu_startup_entry+0x25/0x30
[ 876.949862] start_secondary+0x117/0x140
[ 876.949864] common_startup_64+0x13e/0x148
[ 876.949867] </TASK>
[ 876.949868] ---[ end trace 0000000000000000 ]---
[ 876.949869] ------------[ cut here ]------------
[ 876.949870] list_del corruption, ffffead40445a348->next is NULL
[ 876.949873] WARNING: CPU: 14 PID: 0 at lib/list_debug.c:52 __list_del_entry_valid_or_report+0x67/0x120
[ 876.949875] Modules linked in: snd_hrtimer(E) bnep(E) binfmt_misc(E) amdgpu(E) squashfs(E) vfat(E) loop(E) fat(E) amd_atl(E) snd_hda_codec_realtek(E) intel_rapl_msr(E) snd_hda_codec_generic(E) intel_rapl_common(E) snd_hda_scodec_component(E) snd_hda_codec_hdmi(E) snd_hda_intel(E) edac_mce_amd(E) snd_intel_dspcfg(E) snd_hda_codec(E) snd_hda_core(E) amdxcp(E) kvm_amd(E) snd_hwdep(E) gpu_sched(E) drm_panel_backlight_quirks(E) cec(E) snd_pcm(E) drm_buddy(E) snd_seq_dummy(E) drm_ttm_helper(E) btusb(E) kvm(E) snd_seq_oss(E) btrtl(E) ttm(E) btintel(E) snd_seq_midi(E) btbcm(E) drm_exec(E) snd_seq_midi_event(E) i2c_algo_bit(E) snd_rawmidi(E) bluetooth(E) drm_suballoc_helper(E) irqbypass(E) snd_seq(E) ghash_clmulni_intel(E) sha512_ssse3(E) drm_display_helper(E) aesni_intel(E) snd_seq_device(E) rfkill(E) snd_timer(E) gf128mul(E) drm_client_lib(E) drm_kms_helper(E) snd(E) i2c_piix4(E) joydev(E) soundcore(E) wmi_bmof(E) ccp(E) k10temp(E) i2c_smbus(E) gpio_amdpt(E) i2c_designware_platform(E) gpio_generic(E) sg(E)
[ 876.949914] i2c_designware_core(E) sch_fq_codel(E) parport_pc(E) drm(E) ppdev(E) lp(E) parport(E) fuse(E) nfnetlink(E) ip_tables(E) ext4 crc16 mbcache jbd2 sd_mod sfp mdio_i2c i2c_core txgbe ahci ngbe pcs_xpcs libahci libwx r8169 phylink libata realtek ptp pps_core video wmi
[ 876.949933] CPU: 14 UID: 0 PID: 0 Comm: swapper/14 Kdump: loaded Tainted: G W E 6.16.0-rc2+ #20 PREEMPT(voluntary)
[ 876.949935] Tainted: [W]=WARN, [E]=UNSIGNED_MODULE
[ 876.949936] Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024
[ 876.949936] RIP: 0010:__list_del_entry_valid_or_report+0x67/0x120
[ 876.949938] Code: 00 00 00 48 39 7d 08 0f 85 a6 00 00 00 5b b8 01 00 00 00 5d 41 5c e9 73 0d 93 ff 48 89 fe 48 c7 c7 a0 31 e8 89 e8 59 7c b3 ff <0f> 0b 31 c0 5b 5d 41 5c e9 57 0d 93 ff 48 89 fe 48 c7 c7 c8 31 e8
[ 876.949940] RSP: 0018:ffffaa73405d0c60 EFLAGS: 00010282
[ 876.949941] RAX: 0000000000000000 RBX: ffffead40445a348 RCX: 0000000000000000
[ 876.949942] RDX: 0000000000000105 RSI: 0000000000000001 RDI: 00000000ffffffff
[ 876.949943] RBP: 0000000000000000 R08: 000000010006dfde R09: ffffffff8a47d150
[ 876.949944] R10: ffffffff8a47d150 R11: 0000000000000003 R12: dead000000000122
[ 876.949945] R13: ffff9e3e9e5af700 R14: ffffead40445a348 R15: ffff9e3e9e5af720
[ 876.949946] FS: 0000000000000000(0000) GS:ffff9e3f135be000(0000) knlGS:0000000000000000
[ 876.949947] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 876.949948] CR2: 00007fa58b480048 CR3: 0000000156724000 CR4: 0000000000750ef0
[ 876.949949] PKRU: 55555554
[ 876.949950] Call Trace:
[ 876.949951] <IRQ>
[ 876.949952] __rmqueue_pcplist+0x53/0x2c0
[ 876.949955] alloc_pages_bulk_noprof+0x2e0/0x660
[ 876.949958] __page_pool_alloc_pages_slow+0xa9/0x400
[ 876.949961] page_pool_alloc_pages+0xa/0x20
[ 876.949963] wx_alloc_rx_buffers+0xd7/0x110 [libwx]
[ 876.949967] wx_clean_rx_irq+0x262/0x430 [libwx]
[ 876.949971] wx_poll+0x92/0x130 [libwx]
[ 876.949975] __napi_poll+0x28/0x190
[ 876.949977] net_rx_action+0x301/0x3f0
[ 876.949980] ? srso_alias_return_thunk+0x5/0xfbef5
[ 876.949981] ? profile_tick+0x30/0x70
[ 876.949983] ? srso_alias_return_thunk+0x5/0xfbef5
[ 876.949984] ? srso_alias_return_thunk+0x5/0xfbef5
[ 876.949986] ? timerqueue_add+0xa3/0xc0
[ 876.949988] ? srso_alias_return_thunk+0x5/0xfbef5
[ 876.949989] ? __raise_softirq_irqoff+0x16/0x70
[ 876.949991] ? srso_alias_return_thunk+0x5/0xfbef5
[ 876.949993] ? srso_alias_return_thunk+0x5/0xfbef5
[ 876.949994] ? wx_msix_clean_rings+0x41/0x50 [libwx]
[ 876.949998] handle_softirqs+0xf9/0x2c0
Fixes: 3c47e8ae113a ("net: libwx: Support to receive packets in NAPI")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250714024755.17512-2-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
callback
get_time_fn() callback implementations are expected to fill out the
entire system_counterval_t struct as it may be initially uninitialized.
This broke with the removal of convert_art_to_tsc() helper functions
which left use_nsecs uninitialized.
Initially assign the entire struct with default values.
Fixes: f5e1d0db3f02 ("stmmac: intel: Remove convert_art_to_tsc()")
Cc: stable@vger.kernel.org
Signed-off-by: Markus Blöchl <markus@blochl.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250713-stmmac_crossts-v1-1-31bfe051b5cb@blochl.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-07-15
Brett Werling's patch for the tcan4x5x glue code driver fixes the
detection of chips which are held in reset/sleep and must be woken up
by GPIO prior to communication.
* tag 'linux-can-fixes-for-6.16-20250715' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: tcan4x5x: fix reset gpio usage during probe
====================
Link: https://patch.msgid.link/20250715101625.3202690-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver checks for having three endpoints and
having bulk in and out endpoints, but not that
the third endpoint is interrupt input.
Rectify the omission.
Reported-by: syzbot+3f89ec3d1d0842e95d50@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-usb/686d5a9f.050a0220.1ffab7.0017.GAE@google.com/
Tested-by: syzbot+3f89ec3d1d0842e95d50@syzkaller.appspotmail.com
Fixes: eb4fd8cd355c8 ("net/usb: add sierra_net.c driver")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20250714111326.258378-1-oneukum@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pf->ice_debugfs_pf_fwlog should be checked for an error here.
Fixes: 96a9a9341cda ("ice: configure FW logging")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The function ice_lag_is_switchdev_running() is being called from outside of
the LAG event handler code. This results in the lag->upper_netdev being
NULL sometimes. To avoid a NULL-pointer dereference, there needs to be a
check before it is dereferenced.
Fixes: 776fe19953b0 ("ice: block default rule setting on LAG interface")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
With large values of CONFIG_NR_CPUS, three Intel ethernet drivers fail to
compile like:
In function ‘i40e_free_q_vector’,
inlined from ‘i40e_vsi_alloc_q_vectors’ at drivers/net/ethernet/intel/i40e/i40e_main.c:12112:3:
571 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
include/linux/rcupdate.h:1084:17: note: in expansion of macro ‘BUILD_BUG_ON’
1084 | BUILD_BUG_ON(offsetof(typeof(*(ptr)), rhf) >= 4096); \
drivers/net/ethernet/intel/i40e/i40e_main.c:5113:9: note: in expansion of macro ‘kfree_rcu’
5113 | kfree_rcu(q_vector, rcu);
| ^~~~~~~~~
The problem is that the 'rcu' member in 'q_vector' is too far from the start
of the structure. Move this member before the CPU mask instead, in all three
drivers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Miri Korenblit says:
====================
iwlwifi-fixes
- missing unlock in error path
- Avoid FW assert on bad command values
- fix kernel panic due to incorrect index calculation
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Fixes reset GPIO usage during probe by ensuring we retrieve the GPIO and
take the device out of reset (if it defaults to being in reset) before
we attempt to communicate with the device. This is achieved by moving
the call to tcan4x5x_get_gpios() before tcan4x5x_find_version() and
avoiding any device communication while getting the GPIOs. Once we
determine the version, we can then take the knowledge of which GPIOs we
obtained and use it to decide whether we need to disable the wake or
state pin functions within the device.
This change is necessary in a situation where the reset GPIO is pulled
high externally before the CPU takes control of it, meaning we need to
explicitly bring the device out of reset before we can start
communicating with it at all.
This also has the effect of fixing an issue where a reset of the device
would occur after having called tcan4x5x_disable_wake(), making the
original behavior not actually disable the wake. This patch should now
disable wake or state pin functions well after the reset occurs.
Signed-off-by: Brett Werling <brett.werling@garmin.com>
Link: https://patch.msgid.link/20250711141728.1826073-1-brett.werling@garmin.com
Cc: Markus Schneider-Pargmann <msp@baylibre.com>
Fixes: 142c6dc6d9d7 ("can: tcan4x5x: Add support for tcan4552/4553")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The conversion from compiler assisted indexing to manual
indexing wasn't done correctly. The array is still made
up of __le16 elements so multiplying the outer index by
the element size is not what we want. Fix it up.
This causes the kernel to oops when trying to transfer any
significant amount of data over wifi:
BUG: unable to handle page fault for address: ffffc900009f5282
PGD 100000067 P4D 100000067 PUD 1000fb067 PMD 102e82067 PTE 0
Oops: Oops: 0002 [#1] SMP
CPU: 1 UID: 0 PID: 99 Comm: kworker/u8:3 Not tainted 6.15.0-rc2-cl-bisect3-00604-g6204d5130a64-dirty #78 PREEMPT
Hardware name: Dell Inc. Latitude E5400 /0D695C, BIOS A19 06/13/2013
Workqueue: events_unbound cfg80211_wiphy_work [cfg80211]
RIP: 0010:iwl_trans_pcie_tx+0x4dd/0xe60 [iwlwifi]
Code: 00 00 66 81 fa ff 0f 0f 87 42 09 00 00 3d ff 00 00 00 0f 8f 37 09 00 00 41 c1 e0 0c 41 09 d0 48 8d 14 b6 48 c1 e2 07 48 01 ca <66> 44 89 04 57 48 8d 0c 12 83 f8 3f 0f 8e 84 01 00 00 41 8b 85 80
RSP: 0018:ffffc900001c3b50 EFLAGS: 00010206
RAX: 00000000000000c1 RBX: ffff88810b180028 RCX: 00000000000000c1
RDX: 0000000000002141 RSI: 000000000000000d RDI: ffffc900009f1000
RBP: 0000000000000002 R08: 0000000000000025 R09: ffffffffa050fa60
R10: 00000000fbdbf4bc R11: 0000000000000082 R12: ffff88810e5ade40
R13: ffff88810af81588 R14: 000000000000001a R15: ffff888100dfe0c8
FS: 0000000000000000(0000) GS:ffff8881998c3000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffc900009f5282 CR3: 0000000001e39000 CR4: 00000000000426f0
Call Trace:
<TASK>
? rcu_is_watching+0xd/0x40
? __iwl_dbg+0xb1/0xe0 [iwlwifi]
iwlagn_tx_skb+0x8e2/0xcb0 [iwldvm]
iwlagn_mac_tx+0x18/0x30 [iwldvm]
ieee80211_handle_wake_tx_queue+0x6c/0xc0 [mac80211]
ieee80211_agg_start_txq+0x140/0x2e0 [mac80211]
ieee80211_agg_tx_operational+0x126/0x210 [mac80211]
ieee80211_process_addba_resp+0x27b/0x2a0 [mac80211]
ieee80211_iface_work+0x4bd/0x4d0 [mac80211]
? _raw_spin_unlock_irq+0x1f/0x40
cfg80211_wiphy_work+0x117/0x1f0 [cfg80211]
process_one_work+0x1ee/0x570
worker_thread+0x1c5/0x3b0
? bh_worker+0x240/0x240
kthread+0x110/0x220
? kthread_queue_delayed_work+0x90/0x90
ret_from_fork+0x28/0x40
? kthread_queue_delayed_work+0x90/0x90
ret_from_fork_asm+0x11/0x20
</TASK>
Modules linked in: ctr aes_generic ccm sch_fq_codel bnep xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables btusb btrtl btintel btbcm bluetooth ecdh_generic ecc libaes hid_generic usbhid hid binfmt_misc joydev mousedev snd_hda_codec_hdmi iwldvm snd_hda_codec_idt snd_hda_codec_generic mac80211 coretemp iTCO_wdt watchdog kvm_intel i2c_dev snd_hda_intel libarc4 kvm snd_intel_dspcfg sdhci_pci sdhci_uhs2 snd_hda_codec iwlwifi sdhci irqbypass cqhci snd_hwdep snd_hda_core cfg80211 firewire_ohci mmc_core psmouse snd_pcm i2c_i801 firewire_core pcspkr led_class uhci_hcd i2c_smbus tg3 crc_itu_t iosf_mbi snd_timer rfkill libphy ehci_pci snd ehci_hcd lpc_ich mfd_core usbcore video intel_agp usb_common soundcore intel_gtt evdev agpgart parport_pc wmi parport backlight
CR2: ffffc900009f5282
---[ end trace 0000000000000000 ]---
RIP: 0010:iwl_trans_pcie_tx+0x4dd/0xe60 [iwlwifi]
Code: 00 00 66 81 fa ff 0f 0f 87 42 09 00 00 3d ff 00 00 00 0f 8f 37 09 00 00 41 c1 e0 0c 41 09 d0 48 8d 14 b6 48 c1 e2 07 48 01 ca <66> 44 89 04 57 48 8d 0c 12 83 f8 3f 0f 8e 84 01 00 00 41 8b 85 80
RSP: 0018:ffffc900001c3b50 EFLAGS: 00010206
RAX: 00000000000000c1 RBX: ffff88810b180028 RCX: 00000000000000c1
RDX: 0000000000002141 RSI: 000000000000000d RDI: ffffc900009f1000
RBP: 0000000000000002 R08: 0000000000000025 R09: ffffffffa050fa60
R10: 00000000fbdbf4bc R11: 0000000000000082 R12: ffff88810e5ade40
R13: ffff88810af81588 R14: 000000000000001a R15: ffff888100dfe0c8
FS: 0000000000000000(0000) GS:ffff8881998c3000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffc900009f5282 CR3: 0000000001e39000 CR4: 00000000000426f0
Kernel panic - not syncing: Fatal exception in interrupt
Kernel Offset: disabled
---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
Cc: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Fixes: 6204d5130a64 ("wifi: iwlwifi: use bc entries instead of bc table also for pre-ax210")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20250711205744.28723-1-ville.syrjala@linux.intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git update for v6.16-rc7
Fix an ath12k performance regression introduce in v6.16-rc1
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If a PHY has no driver, the genphy driver is probed/removed directly in
phy_attach/detach. If the PHY's ofnode has an "leds" subnode, then the
LEDs will be (un)registered when probing/removing the genphy driver.
This could occur if the leds are for a non-generic driver that isn't
loaded for whatever reason. Synchronously removing the PHY device in
phy_detach leads to the following deadlock:
rtnl_lock()
ndo_close()
...
phy_detach()
phy_remove()
phy_leds_unregister()
led_classdev_unregister()
led_trigger_set()
netdev_trigger_deactivate()
unregister_netdevice_notifier()
rtnl_lock()
There is a corresponding deadlock on the open/register side of things
(and that one is reported by lockdep), but it requires a race while this
one is deterministic.
Generic PHYs do not support LEDs anyway, so don't bother registering
them.
Fixes: 01e5b728e9e4 ("net: phy: Add a binding for PHY LEDs")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250707195803.666097-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add missing post-increment operators for byte pointers in the
loop that copies remaining bytes in xemaclite_aligned_read().
Without the increment, the same byte was written repeatedly
to the destination.
This update aligns with xemaclite_aligned_write()
Fixes: bb81b2ddfa19 ("net: add Xilinx emac lite device driver")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20250710173849.2381003-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, packets are being received into the WBM error ring when
REO queue lookup is enabled, resulting in degraded RX performance.
The issue arises because the REO queue LUT TID memory reference is
set to zero-it's being assigned before the memory is allocated.
Fix this by assigning the REO queue TID memory reference in the LUT
immediately after memory allocation to ensure correct packet
processing.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Reported-by: Tanguy Serrat <tanguy@squaremind.io>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220282
Fixes: 3b9cbce6fdd3 ("wifi: ath12k: alloc REO queue per station")
Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250710011754.559817-1-nithyanantham.paramasivam@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
When transmitting an XDP_REDIRECT packet, call dma_unmap_len_set()
with the proper length instead of 0. This bug triggers this warning
on a system with IOMMU enabled:
WARNING: CPU: 36 PID: 0 at drivers/iommu/dma-iommu.c:842 __iommu_dma_unmap+0x159/0x170
RIP: 0010:__iommu_dma_unmap+0x159/0x170
Code: a8 00 00 00 00 48 c7 45 b0 00 00 00 00 48 c7 45 c8 00 00 00 00 48 c7 45 a0 ff ff ff ff 4c 89 45
b8 4c 89 45 c0 e9 77 ff ff ff <0f> 0b e9 60 ff ff ff e8 8b bf 6a 00 66 66 2e 0f 1f 84 00 00 00 00
RSP: 0018:ff22d31181150c88 EFLAGS: 00010206
RAX: 0000000000002000 RBX: 00000000e13a0000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ff22d31181150cf0 R08: ff22d31181150ca8 R09: 0000000000000000
R10: 0000000000000000 R11: ff22d311d36c9d80 R12: 0000000000001000
R13: ff13544d10645010 R14: ff22d31181150c90 R15: ff13544d0b2bac00
FS: 0000000000000000(0000) GS:ff13550908a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005be909dacff8 CR3: 0008000173408003 CR4: 0000000000f71ef0
PKRU: 55555554
Call Trace:
<IRQ>
? show_regs+0x6d/0x80
? __warn+0x89/0x160
? __iommu_dma_unmap+0x159/0x170
? report_bug+0x17e/0x1b0
? handle_bug+0x46/0x90
? exc_invalid_op+0x18/0x80
? asm_exc_invalid_op+0x1b/0x20
? __iommu_dma_unmap+0x159/0x170
? __iommu_dma_unmap+0xb3/0x170
iommu_dma_unmap_page+0x4f/0x100
dma_unmap_page_attrs+0x52/0x220
? srso_alias_return_thunk+0x5/0xfbef5
? xdp_return_frame+0x2e/0xd0
bnxt_tx_int_xdp+0xdf/0x440 [bnxt_en]
__bnxt_poll_work_done+0x81/0x1e0 [bnxt_en]
bnxt_poll+0xd3/0x1e0 [bnxt_en]
Fixes: f18c2b77b2e4 ("bnxt_en: optimized XDP_REDIRECT support")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250710213938.1959625-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bnxt_fill_drv_seg_record() calls bnxt_dbg_hwrm_log_buffer_flush()
to flush the FW trace buffer. This needs to be done before we
call bnxt_copy_ctx_mem() to copy the trace data.
Without this fix, the coredump may not contain all the FW
traces.
Fixes: 3c2179e66355 ("bnxt_en: Add FW trace coredump segments to the coredump")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Shruti Parab <shruti.parab@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250710213938.1959625-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In bnxt_ets_validate(), the code incorrectly loops over all possible
traffic classes to check and add the ETS settings. Fix it to loop
over the configured traffic classes only.
The unconfigured traffic classes will default to TSA_ETS with 0
bandwidth. Looping over these unconfigured traffic classes may
cause the validation to fail and trigger this error message:
"rejecting ETS config starving a TC\n"
The .ieee_setets() will then fail.
Fixes: 7df4ae9fe855 ("bnxt_en: Implement DCBNL to support host-based DCBX.")
Reviewed-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Shravya KN <shravya.k-n@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250710213938.1959625-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function ll_temac_ethtools_set_ringparam() incorrectly checked
rx_pending twice, once correctly for RX and once mistakenly in place
of tx_pending. This caused tx_pending to be left unchecked against
TX_BD_NUM_MAX.
As a result, invalid TX ring sizes may have been accepted or valid
ones wrongly rejected based on the RX limit, leading to potential
misconfiguration or unexpected results.
This patch corrects the condition to properly validate tx_pending.
Fixes: f7b261bfc35e ("net: ll_temac: Make RX/TX ring sizes configurable")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20250710180621.2383000-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
An optimization for promiscuous mode adds a high-priority steering
table with a single catch-all rule to steer all traffic directly to
the TTC table.
However, a gap exists between the creation of this table and the
insertion of the catch-all rule. Packets arriving in this brief window
would miss as no rule was inserted yet, unnecessarily incrementing the
'rx_steer_missed_packets' counter and dropped.
This patch resolves the issue by introducing a new prio for this
table, placing it between MLX5E_TC_PRIO and MLX5E_NIC_PRIO. By doing
so, packets arriving during the window now fall through to the next
prio (at MLX5E_NIC_PRIO) instead of being dropped.
Fixes: 1c46d7409f30 ("net/mlx5e: Optimize promiscuous mode")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/1752155624-24095-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There's a race between disabling DIM and NAPI callbacks using the dim
pointer on the RQ or SQ.
If NAPI checks the DIM state bit and sees it still set, it assumes
`rq->dim` or `sq->dim` is valid. But if DIM gets disabled right after
that check, the pointer might already be set to NULL, leading to a NULL
pointer dereference in net_dim().
Fix this by calling `synchronize_net()` before freeing the DIM context.
This ensures all in-progress NAPI callbacks are finished before the
pointer is cleared.
Kernel log:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
RIP: 0010:net_dim+0x23/0x190
...
Call Trace:
<TASK>
? __die+0x20/0x60
? page_fault_oops+0x150/0x3e0
? common_interrupt+0xf/0xa0
? sysvec_call_function_single+0xb/0x90
? exc_page_fault+0x74/0x130
? asm_exc_page_fault+0x22/0x30
? net_dim+0x23/0x190
? mlx5e_poll_ico_cq+0x41/0x6f0 [mlx5_core]
? sysvec_apic_timer_interrupt+0xb/0x90
mlx5e_handle_rx_dim+0x92/0xd0 [mlx5_core]
mlx5e_napi_poll+0x2cd/0xac0 [mlx5_core]
? mlx5e_poll_ico_cq+0xe5/0x6f0 [mlx5_core]
busy_poll_stop+0xa2/0x200
? mlx5e_napi_poll+0x1d9/0xac0 [mlx5_core]
? mlx5e_trigger_irq+0x130/0x130 [mlx5_core]
__napi_busy_loop+0x345/0x3b0
? sysvec_call_function_single+0xb/0x90
? asm_sysvec_call_function_single+0x16/0x20
? sysvec_apic_timer_interrupt+0xb/0x90
? pcpu_free_area+0x1e4/0x2e0
napi_busy_loop+0x11/0x20
xsk_recvmsg+0x10c/0x130
sock_recvmsg+0x44/0x70
__sys_recvfrom+0xbc/0x130
? __schedule+0x398/0x890
__x64_sys_recvfrom+0x20/0x30
do_syscall_64+0x4c/0x100
entry_SYSCALL_64_after_hwframe+0x4b/0x53
...
---[ end trace 0000000000000000 ]---
...
---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
Fixes: 445a25f6e1a2 ("net/mlx5e: Support updating coalescing configuration without resetting channels")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/1752155624-24095-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When changing a node's parent, its scheduling element is destroyed and
re-created with bw_share 0. However, the node's bw_share field was not
updated accordingly.
Set the node's bw_share to 0 after re-creation to keep the software
state in sync with the firmware configuration.
Fixes: 9c7bbf4c3304 ("net/mlx5: Add support for setting parent of nodes")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/1752155624-24095-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
debug level
Downgrade the "msg lost in rx" message to debug level, to prevent
flooding the kernel log with error messages.
Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support")
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20250711-mcan_ratelimit-v3-1-7413e8e21b84@geanix.com
[mkl: enhance commit message]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Restrict the 100Mbit forced-mode workaround to link-down transitions
only, to prevent repeated link reset cycles in certain configurations.
The workaround was originally introduced to improve signal reliability
when switching cables between long and short distances. It temporarily
forces the PHY into 10 Mbps before returning to 100 Mbps.
However, when used with autonegotiating link partners (e.g., Intel i350),
executing this workaround on every link change can confuse the partner
and cause constant renegotiation loops. This results in repeated link
down/up transitions and the PHY never reaching a stable state.
Limit the workaround to only run during the PHY_NOLINK state. This ensures
it is triggered only once per link drop, avoiding disruptive toggling
while still preserving its intended effect.
Note: I am not able to reproduce the original issue that this workaround
addresses. I can only confirm that 100 Mbit mode works correctly in my
test setup. Based on code inspection, I assume the workaround aims to
reset some internal state machine or signal block by toggling speeds.
However, a PHY reset is already performed earlier in the function via
phy_init_hw(), which may achieve a similar effect. Without a reproducer,
I conservatively keep the workaround but restrict its conditions.
Fixes: e57cf3639c32 ("net: lan78xx: fix accessing the LAN7800's internal phy specific registers from the MAC driver")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250709130753.3994461-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enable .soft_reset for the LAN88xx PHY driver by assigning
genphy_soft_reset() to ensure that the phylib core performs a proper
soft reset during reconfiguration.
Previously, the driver left .soft_reset unimplemented, so calls to
phy_init_hw() (e.g., from lan88xx_link_change_notify()) did not fully
reset the PHY. As a result, stale contents in the Link Partner Ability
(LPA) register could persist, causing the PHY to incorrectly report
that the link partner advertised autonegotiation even when it did not.
Using genphy_soft_reset() guarantees a clean reset of the PHY and
corrects the false autoneg reporting in these scenarios.
Fixes: ccb989e4d1ef ("net: phy: microchip: Reset LAN88xx PHY to ensure clean link state on LAN7800/7850")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250709130753.3994461-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The previous hardcoded definitions of NUM_RX_STATS and
NUM_TX_STATS were not updated when new fields were added
to the ibmvnic_{rx,tx}_queue_stats structures. Specifically,
commit 2ee73c54a615 ("ibmvnic: Add stat for tx direct vs tx
batched") added a fourth TX stat, but NUM_TX_STATS remained 3,
leading to a mismatch.
This patch replaces the static defines with dynamic sizeof-based
calculations to ensure the stat arrays are correctly sized.
This fixes incorrect indexing and prevents incomplete stat
reporting in tools like ethtool.
Fixes: 2ee73c54a615 ("ibmvnic: Add stat for tx direct vs tx batched")
Signed-off-by: Mingming Cao <mmc@linux.ibm.com>
Reviewed-by: Dave Marquardt <davemarq@linux.ibm.com>
Reviewed-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250709153332.73892-1-mmc@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Quite a number of fixes still:
- mt76 (hadn't sent any fixes so far)
- RCU
- scanning
- decapsulation offload
- interface combinations
- rt2x00: build fix (bad function pointer prototype)
- cfg80211: prevent A-MSDU flipping attacks in mesh
- zd1211rw: prevent race ending with NULL ptr deref
- cfg80211/mac80211: more S1G fixes
- mwifiex: avoid WARN on certain RX frames
- mac80211:
- avoid stack data leak in WARN cases
- fix non-transmitted BSSID search
(on certain multi-BSSID APs)
- always initialize key list so driver
iteration won't crash
- fix monitor interface in device restart
- fix __free() annotation usage
* tag 'wireless-2025-07-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (26 commits)
wifi: mac80211: add the virtual monitor after reconfig complete
wifi: mac80211: always initialize sdata::key_list
wifi: mac80211: Fix uninitialized variable with __free() in ieee80211_ml_epcs()
wifi: mt76: mt792x: Limit the concurrent STA and SoftAP to operate on the same channel
wifi: mt76: mt7925: Fix null-ptr-deref in mt7925_thermal_init()
wifi: mt76: fix queue assignment for deauth packets
wifi: mt76: add a wrapper for wcid access with validation
wifi: mt76: mt7921: prevent decap offload config before STA initialization
wifi: mt76: mt7925: prevent NULL pointer dereference in mt7925_sta_set_decap_offload()
wifi: mt76: mt7925: fix incorrect scan probe IE handling for hw_scan
wifi: mt76: mt7925: fix invalid array index in ssid assignment during hw scan
wifi: mt76: mt7925: fix the wrong config for tx interrupt
wifi: mt76: Remove RCU section in mt7996_mac_sta_rc_work()
wifi: mt76: Move RCU section in mt7996_mcu_add_rate_ctrl()
wifi: mt76: Move RCU section in mt7996_mcu_add_rate_ctrl_fixed()
wifi: mt76: Move RCU section in mt7996_mcu_set_fixed_field()
wifi: mt76: Assume __mt76_connac_mcu_alloc_sta_req runs in atomic context
wifi: prevent A-MSDU attacks in mesh networks
wifi: rt2x00: fix remove callback type mismatch
wifi: mac80211: reject VHT opmode for unsupported channel widths
...
====================
Link: https://patch.msgid.link/20250710122212.24272-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
skb_shared_info
While transitioning from netdev_alloc_ip_align() to build_skb(), memory
for the "skb_shared_info" member of an "skb" was not allocated. Fix this
by allocating "PAGE_SIZE" as the skb length, accounting for the packet
length, headroom and tailroom, thereby including the required memory space
for skb_shared_info.
Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support")
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Link: https://patch.msgid.link/20250707085201.1898818-1-c-vankar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current logic in nicvf_change_mtu() writes the new MTU to
netdev->mtu using WRITE_ONCE() before verifying if the hardware
update succeeds. However on hardware update failure, it attempts
to revert to the original MTU using a direct assignment
(netdev->mtu = orig_mtu)
which violates the intended of WRITE_ONCE protection introduced in
commit 1eb2cded45b3 ("net: annotate writes on dev->mtu from
ndo_change_mtu()")
Additionally, WRITE_ONCE(netdev->mtu, new_mtu) is unnecessarily
performed even when the device is not running.
Fix this by:
Only writing netdev->mtu after successfully updating the hardware.
Skipping hardware update when the device is down, and setting MTU
directly. Remove unused variable orig_mtu.
This ensures that all writes to netdev->mtu are consistent with
WRITE_ONCE expectations and avoids unintended state corruption
on failure paths.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250706194327.1369390-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix below warning in Hyper-V's MANA drivers that comes when kernel is
compiled with W=1 option. Include export.h in driver files to fix it.
* warning: EXPORT_SYMBOL() is used, but #include <linux/export.h>
is missing
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250611100459.92900-7-namjain@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250611100459.92900-7-namjain@linux.microsoft.com>
|
|
Mask the reserved bits as firmware will assert if reserved bits are set.
Fixes: ef7ddf4e2f94 ("wifi: iwlwifi: Add support for LARI_CONFIG_CHANGE_CMD v12")
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709065608.7a72c70bdc9d.Ic9be0a3fc3aabde0c4b88568f3bb7b76e375f8d4@changeid
|
|
Force a fixed MDI-X mode when auto-negotiation is disabled to prevent
link instability.
When forcing the link speed and duplex on a LAN9500 PHY (e.g., with
`ethtool -s eth0 autoneg off ...`) while leaving MDI-X control in auto
mode, the PHY fails to establish a stable link. This occurs because the
PHY's Auto-MDIX algorithm is not designed to operate when
auto-negotiation is disabled. In this state, the PHY continuously
toggles the TX/RX signal pairs, which prevents the link partner from
synchronizing.
This patch resolves the issue by detecting when auto-negotiation is
disabled. If the MDI-X control mode is set to 'auto', the driver now
forces a specific, stable mode (ETH_TP_MDI) to prevent the pair
toggling. This choice of a fixed MDI mode mirrors the behavior the
hardware would exhibit if the AUTOMDIX_EN strap were configured for a
fixed MDI connection.
Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Andre Edich <andre.edich@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250703114941.3243890-4-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Override the hardware strap configuration for MDI-X mode to ensure a
predictable initial state for the driver. The initial mode of the LAN87xx
PHY is determined by the AUTOMDIX_EN strap pin, but the driver has no
documented way to read its latched status.
This unpredictability means the driver cannot know if the PHY has
initialized with Auto-MDIX enabled or disabled, preventing it from
providing a reliable interface to the user.
This patch introduces a `config_init` hook that forces the PHY into a
known state by explicitly enabling Auto-MDIX.
Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Andre Edich <andre.edich@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250703114941.3243890-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct the Auto-MDIX configuration to ensure userspace settings are
respected when the feature is disabled by the AUTOMDIX_EN hardware strap.
The LAN9500 PHY allows its default MDI-X mode to be configured via a
hardware strap. If this strap sets the default to "MDI-X off", the
driver was previously unable to enable Auto-MDIX from userspace.
When handling the ETH_TP_MDI_AUTO case, the driver would set the
SPECIAL_CTRL_STS_AMDIX_ENABLE_ bit but neglected to set the required
SPECIAL_CTRL_STS_OVRRD_AMDIX_ bit. Without the override flag, the PHY
falls back to its hardware strap default, ignoring the software request.
This patch corrects the behavior by also setting the override bit when
enabling Auto-MDIX. This ensures that the userspace configuration takes
precedence over the hardware strap, allowing Auto-MDIX to be enabled
correctly in all scenarios.
Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Andre Edich <andre.edich@microchip.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250703114941.3243890-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to the Synopsys Controller IP XGMAC-10G Ethernet MAC Databook
v3.30a (section 2.7.2), when the INTM bit in the DMA_Mode register is set
to 2, the sbd_perch_tx_intr_o[] and sbd_perch_rx_intr_o[] signals operate
in level-triggered mode. However, in this configuration, the DMA does not
assert the XGMAC_NIS status bit for Rx or Tx interrupt events.
This creates a functional regression where the condition
if (likely(intr_status & XGMAC_NIS)) in dwxgmac2_dma_interrupt() will
never evaluate to true, preventing proper interrupt handling for
level-triggered mode. The hardware specification explicitly states that
"The DMA does not assert the NIS status bit for the Rx or Tx interrupt
events" (Synopsys DWC_XGMAC2 Databook v3.30a, sec. 2.7.2).
The fix ensures correct handling of both edge and level-triggered
interrupts while maintaining backward compatibility with existing
configurations. It has been tested on the hardware device (not publicly
available), and it can properly trigger the RX and TX interrupt handling
in both the INTM=0 and INTM=2 configurations.
Fixes: d6ddfacd95c7 ("net: stmmac: Add DMA related callbacks for XGMAC2")
Tested-by: EricChan <chenchuangyu@xiaomi.com>
Signed-off-by: EricChan <chenchuangyu@xiaomi.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250703020449.105730-1-chenchuangyu@xiaomi.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If an error occurs after a successful airoha_hw_init() call,
airoha_ppe_deinit() needs to be called as already done in the remove
function.
Fixes: 00a7678310fe ("net: airoha: Introduce flowtable offload support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/1c940851b4fa3c3ed2a142910c821493a136f121.1746715755.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
