summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2014-04-30rsi: Changing opcode for sta mode according to changes in firmwareJahnavi Meher2-2/+3
Signed-off-by: Jahnavi Meher <jahnavi.meher@redpinesignals.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30ath9k_hw: fix worse EVM for 11b ratesRajkumar Manoharan2-6/+6
Adjust FIR filter co-efficients to improve EVM for 11b rates. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30ath9k_hw: update ar9300 initvalsRajkumar Manoharan5-5/+5
* rfsat gainchange hysteresis of rf_gain stuck with large interference present. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30b43: N-PHY: complete radio 0x2056 setupRafał Miłecki1-5/+27
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30ath5k: Fix AR5K_PHY_TXPOWER_RATE_MAX register value setting.Nickolay Ledovskikh1-2/+2
I was reading ath5k power setting code and noticed typing error in ath5k_hw_txpower function. Invalid value was written to AR5K_PHY_TXPOWER_RATE_MAX register. Signed-off-by: Nikolay Ledovskikh <nledovskikh@gmail.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30iwlegacy: Convert /n to \nJoe Perches2-2/+2
Use a newline character appropriately. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30wlcore: fix usage of platform_device_add_data()Christian Engelmayer2-31/+20
Coverity CID 986698 reports leakage of struct wlcore_platdev_data in the probe functions of both the SPI/SDIO interfaces. The structure passed to platform_device_add_data() is dynamically allocated and only freed in the error paths, however, platform_device_add_data() adds a copy of the platform specific data to the device. Move the temporary struct that is kmemdup'ed to the stack. This issue exists since afb43e6d (wlcore: remove if_ops from platform_data). Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30rtlwifi: rtl8723be: disable MSI interrupts modeAdam Lee1-1/+1
94010fa0dd07e8b904e7c6b6589f15573008ab15 ("rtlwifi: add MSI interrupts mode support") introduced MSI interrupts mode support, which seemed safe enough with RTL8188EE and RTL8723BE as RealTek's testing results, but some users reported their RTL8188EE modules could not connect to any wireless network after the MSI mode was enabled by Ubuntu 14.04. So, let's fallback to pin-based mode until rtlwifi's MSI support get good compatibility. BugLink: https://bugs.launchpad.net/bugs/1310512 Signed-off-by: Adam Lee <adam.lee@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30Revert "rtlwifi: rtl8188ee: enable MSI interrupts mode"Adam Lee1-1/+0
This reverts commit 2a54eb5e1476426ee639bbfbe179b52342a0d82c ("rtlwifi: rtl8188ee: enable MSI interrupts mode"). 94010fa0dd07e8b904e7c6b6589f15573008ab15 ("rtlwifi: add MSI interrupts mode support") introduced MSI interrupts mode support, which seemed safe enough with RTL8188EE and RTL8723BE as RealTek's testing results, but some users reported their RTL8188EE modules could not connect to any wireless network after the MSI mode was enabled by Ubuntu 14.04. So, let's fallback to pin-based mode until rtlwifi's MSI support get good compatibility. BugLink: https://bugs.launchpad.net/bugs/1310512 Signed-off-by: Adam Lee <adam.lee@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30b43: don't pre-set radio_on variable to trueRafał Miłecki1-1/+0
Setting it to true during init doesn't seem to be any workaround while it can cause problems (not enabling radio due to belief it's enabled). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30b43: use b43_software_rfkill helperRafał Miłecki1-3/+3
This removes dealing with pointers directly and allows tracking radio state with radio_on variable. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30b43: bcma: respect GMODE (band choice) during core resetRafał Miłecki1-1/+6
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30Merge branch 'for-john' of ↵John W. Linville16-16/+35
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: net/mac80211/chan.c
2014-04-28mac80211_hwsim: Advertise support for AP mode channel width changesJouni Malinen1-0/+1
mac80211 takes care of all the needed steps for hwsim, so indicate support for this capability. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25Revert "mwifiex: add firmware dump feature for PCIe"John W. Linville5-261/+0
This reverts commit e050c76fcf49599c5b98e4614392dc87c69123a6. I'm not sure what crack pipe I was using when I merged this... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22b43: remove list of IEEE 802.11 devicesRafał Miłecki2-37/+19
This is the first step to remove leftover code. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22b43: ssb: refuse to support more than IEEE 802.11 coreRafał Miłecki1-17/+20
Some ancient Broadcom devices had one core per band, e.g.: ssb: Found chip with id 0x4306, rev 0x02 and package 0x00 ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x02, vendor 0x4243) ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x04, vendor 0x4243) ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x01, vendor 0x4243) ssb: Core 3 found: V90 (cc 0x807, rev 0x01, vendor 0x4243) ssb: Core 4 found: PCI (cc 0x804, rev 0x07, vendor 0x4243) ssb: Core 5 found: IEEE 802.11 (cc 0x812, rev 0x04, vendor 0x4243) This hardware model was dropped for newer devices handled by b43. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22b43: N-PHY: enable forgotten write of hw power adjust tableRafał Miłecki1-2/+14
We've implemented table calculation, but forgot to enable writing it in power setup function. By the way document table layout. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22b43: N-PHY: fix selection of init & calib valuesRafał Miłecki1-67/+105
Logic in specs and our code was wrong. Init and calibration values for newer cards depend on radio revision, not PHY revision. To make code clearer, change tables names to include "radio" or "phy". Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22b43: N-PHY: add init & calib values for radio 0x2056 rev 11Rafał Miłecki1-0/+246
They were extracted from MMIO dumps of 14e4:4353 and wl 6.30.223.141. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22b43: N-PHY: prepare for rev 7+ RSSI calibrationRafał Miłecki1-18/+54
Mostly just add place for future code Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22b43: N-PHY: implement RF control INTC for revs 7+Rafał Miłecki1-0/+72
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22b43: N-PHY: implement reading support for radio 0x2057Rafał Miłecki1-2/+5
Bit 0x200 has been noticed in the following log: radio_read(0x02ca) -> 0x0000 radio_write(0x00ca) <- 0x0080 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22b43: N-PHY: random updates and typo fixes all aroundRafał Miłecki1-9/+9
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22b43: N-PHY: rev3+: complete workaroundsRafał Miłecki1-3/+84
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22b43: N-PHY: drop second noise variance tableRafał Miłecki2-72/+3
New Broadcom drivers don't upload it anymore. It was probably a copy & paste mistake in early N-PHY rev 3+ days. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22b43: G-PHY: fix random mistakes to match specsRafał Miłecki2-4/+4
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22mwifiex: enable aggregation for TID 6 and 7 streamsAmitkumar Karwar1-9/+0
Currently AMSDU and AMPDU aggregation is enabled for TID 0 to TID 5 streams. Lets enable it for remaining two streams also. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22mwifiex: increase tx/rx AMPDU window sizes for STA 11ac modeAmitkumar Karwar1-2/+2
This will help to aggregate more packets which yields better throughput results for 11ac chipsets. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22mwifiex: increase tx/rx AMPDU window sizes for STA 11n modeAmitkumar Karwar1-2/+2
This will help to aggregate more packets which yields better throughput results. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22mwifiex: add firmware dump feature for PCIeAmitkumar Karwar5-0/+261
Firmware dump feature is added for PCIe based chipsets. Separate file will be created at /var/log/fw_dump_* for each memory segment. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22mwifiex: add fw_dump debugfs fileAmitkumar Karwar3-0/+33
This option be useful to dump firmware memory for debugging purpose. Actual code to dump firmware momory for SDIO and PCIe chipsets will be added later. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22rt2x00: restore original beaconing stateStanislaw Gruszka3-18/+17
After changing local per interface beacon setting restore original global beaconing state. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22mwifiex: don't clear cmd_sent flag in timeout handlerAmitkumar Karwar1-2/+0
When command timeout occurs due to a firmware/hardware bug, there is no chance of next command being successful. We will keep cmd_sent flag on so that next command won't be sent to firmware. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22mwifiex: fix IE parsing issuesAmitkumar Karwar3-17/+9
IE's are parsed from beacon buffer and stored locally using mwifiex_update_bss_desc_with_ie() function. Sometimes the local pointers point to the data inside IE, but while using them it is assumed that they are pointing to the IE itself. These issues are fixed in this patch. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22mwifiex: remove redundant 'fw_load' completion structureAmitkumar Karwar5-14/+0
'add_remove_card_sem' semaphore already takes care of synchronization for driver load and unload threads. Hence there won't be a case when unload thread is waiting on 'wait_for_completion(fw_load)'. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22mwifiex: use USB core's soft_unbind optionAmitkumar Karwar1-31/+29
This option allows driver to finish pending operations in disconnect handler by not killing URBs after usb_deregister call. We will get rid of global pointer 'usb_card' by moving code from cleanup_module() to disconnect(). This will help to match with our handling for SDIO and PCIe interfaces. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22mwifiex: update timestamp information for aggregation packetsAvinash Patil1-0/+4
New skbs are allocated at the time of AMSDU aggregation. Setting up in timestamps for such skbs was missing which would result into wrong queue delays passed to FW. Fix this by setting timestamp of skbs created for AMSDU aggregation. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22mwifiex: increase the number of nodes in command poolAmitkumar Karwar2-16/+3
Command nodes are increased from 20 to 50. Now we can always scan 1 channel per scan command to avoid traffic delay/loss in connected state. We will get rid of *CHANNEL_PER_SCAN_CMD macros used due to command node constraints. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22mwifiex: improve AMSDU packet aggregation for PCIe and SDIOAmitkumar Karwar1-12/+5
For PCIe, aggregate more AMSDU packets till PCIe TXBD is full. For SDIO, aggregation was disabled for AMSDU packets because AMSDU aggregated packet size is already 4K or 8K, SDIO Multiport Aggregation feature didn't use to gain much previously. Now with increased multiport aggregation buffer, we can enable it for AMSDU packets. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22mwifiex: increase SDIO multiport aggregation buffer sizesAmitkumar Karwar2-6/+18
Currently Tx and Rx buffer sizes are 8K and 16K respectively for all chipsets. We will change them to 32K for SD8897 and 16K for older chipsets. SD8897 chipset has more SDIO data ports than older chipsets. This patch will help to improve throughput numbers. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22mwifiex: change memset to simple assignment for ht_cap.mcs.rx_maskMaithili Hinge1-3/+5
WARNING: single byte memset is suspicious. Swapped 2nd/3rd argument? This code happens to work because rx_mcs is the first variable in mcs structure. We should use 'mcs.rx_mcs' here anyway. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Maithili Hinge <maithili@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22wil6210: Use larger Tx ringsVladimir Kondratiev1-1/+1
When using scatter-gather, more descriptor entries get used. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22wil6210: relaxed check for BACK start sequenceVladimir Kondratiev2-0/+18
Sometimes, due to the race between Rx path and WMI_BA_STATUS_EVENTID WMI event, few frames may be passed to the stack before reorder buffer allocated. Then, after BACK establishment, it start getting frames with sequence number ahead of SSN, and it get interpreted as missing frames. Then, BACK mechanism will wait for missing frames; data traffic will be stopped. In case of interface configured for DHCP, this data delay causes DHCP failure. Relax checking for sequence number; use sequence of 1-st frame handled by the buffer as SSN for this buffer. This is work-around, real fix should be done when proper BACK mechanism implemented. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22wil6210: sync with the latest FW APIVladimir Kondratiev2-20/+33
- add pcp_max_assoc_sta to the struct wmi_pcp_start_cmd - enum for the scan ststus Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22wil6210: fix printouts for better readabilityVladimir Kondratiev4-9/+7
Reshuffle prints to consolidate firmware/hardware information report upon card init Convert print for unhandled MISC ISR bits to "debug" - it is normal situation and not an "error" Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22ath9k: implement p2p client powersave supportFelix Fietkau4-0/+127
Use generic TSF timers to trigger powersave state changes based information from the P2P NoA attribute. Opportunistic Powersave is not handled, because the driver does not support powersave at the moment. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22ath9k: support only one P2P interfaceFelix Fietkau1-2/+2
Preparation for adding P2P powersave and multi-channel support. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22ray_cs: replace del_timer by del_timer_syncJulia Lawall1-1/+1
Use del_timer_sync to ensure that the timer is stopped on all CPUs before the driver exits. This change was suggested by Thomas Gleixner. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier i,t,ex; @@ struct t i = { .remove = ex, }; @@ identifier r.ex; @@ ex(...) { <... - del_timer + del_timer_sync (...) ...> } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22rtl8180: be paranoid in stopping unused queues.Andrea Merello1-1/+4
HW should never attempt to perform DMA for unused queues. For rtl8187se this is ensured by setting a dedicated register at init time, before enabling TX. In rtl8180/5 the register is only written at the first TX (because in rtl8180/5 it serves also to kick DMA for used queues). This should be enough, but it's worth to add a register write at init time, before enabling TX. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-25 16:09:27 +0300