summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
3 dayswifi: rtl8xxxu: fix slab-out-of-bounds in rtl8xxxu_sta_addAli Tariq1-0/+1
commit 86c946bcc00f6390ef65e9614ae60a9377e454f8 upstream. The driver does not set hw->sta_data_size, which causes mac80211 to allocate insufficient space for driver private station data in __sta_info_alloc(). When rtl8xxxu_sta_add() accesses members of struct rtl8xxxu_sta_info through sta->drv_priv, this results in a slab-out-of-bounds write. KASAN report on RISC-V (VisionFive 2) with RTL8192EU adapter: BUG: KASAN: slab-out-of-bounds in rtl8xxxu_sta_add+0x31c/0x346 Write of size 8 at addr ffffffd6d3e9ae88 by task kworker/u16:0/12 Set hw->sta_data_size to sizeof(struct rtl8xxxu_sta_info) during probe, similar to how hw->vif_data_size is configured. This ensures mac80211 allocates sufficient space for the driver's per-station private data. Tested on StarFive VisionFive 2 v1.2A board. Fixes: eef55f1545c9 ("wifi: rtl8xxxu: support multiple interfaces in {add,remove}_interface()") Cc: stable@vger.kernel.org Signed-off-by: Ali Tariq <alitariq45892@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251225115430.13011-1-alitariq45892@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 dayswifi: rtw88: Fix alignment fault in rtw_core_enable_beacon()Bitterblue Smith1-2/+2
commit 0177aa828d966117ea30a44f2e1890fdb356118e upstream. rtw_core_enable_beacon() reads 4 bytes from an address that is not a multiple of 4. This results in a crash on some systems. Do 1 byte reads/writes instead. Unable to handle kernel paging request at virtual address ffff8000827e0522 Mem abort info: ESR = 0x0000000096000021 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x21: alignment fault Data abort info: ISV = 0, ISS = 0x00000021, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000005492000 [ffff8000827e0522] pgd=0000000000000000, p4d=10000001021d9403, pud=10000001021da403, pmd=100000011061c403, pte=00780000f3200f13 Internal error: Oops: 0000000096000021 [#1] SMP Modules linked in: [...] rtw88_8822ce rtw88_8822c rtw88_pci rtw88_core [...] CPU: 0 UID: 0 PID: 73 Comm: kworker/u32:2 Tainted: G W 6.17.9 #1-NixOS VOLUNTARY Tainted: [W]=WARN Hardware name: FriendlyElec NanoPC-T6 LTS (DT) Workqueue: phy0 rtw_c2h_work [rtw88_core] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : rtw_pci_read32+0x18/0x40 [rtw88_pci] lr : rtw_core_enable_beacon+0xe0/0x148 [rtw88_core] sp : ffff800080cc3ca0 x29: ffff800080cc3ca0 x28: ffff0001031fc240 x27: ffff000102100828 x26: ffffd2cb7c9b4088 x25: ffff0001031fc2c0 x24: ffff000112fdef00 x23: ffff000112fdef18 x22: ffff000111c29970 x21: 0000000000000001 x20: 0000000000000001 x19: ffff000111c22040 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffd2cb6507c090 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000007f10 x1 : 0000000000000522 x0 : ffff8000827e0522 Call trace: rtw_pci_read32+0x18/0x40 [rtw88_pci] (P) rtw_hw_scan_chan_switch+0x124/0x1a8 [rtw88_core] rtw_fw_c2h_cmd_handle+0x254/0x290 [rtw88_core] rtw_c2h_work+0x50/0x98 [rtw88_core] process_one_work+0x178/0x3f8 worker_thread+0x208/0x418 kthread+0x120/0x220 ret_from_fork+0x10/0x20 Code: d28fe202 8b020000 f9524400 8b214000 (b9400000) ---[ end trace 0000000000000000 ]--- Fixes: ad6741b1e044 ("wifi: rtw88: Stop high queue during scan") Cc: stable@vger.kernel.org Closes: https://github.com/lwfinger/rtw88/issues/418 Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/6345300d-8c93-464c-9b05-d0d9af3c97ad@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-05Merge tag 'wireless-2026-02-04' of ↵Jakub Kicinski3-3/+7
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== Two last-minute iwlwifi fixes: - cancel mlo_scan_work on disassoc to avoid use-after-free/init-after-queue issues - pause TCM work on suspend to avoid crashing the FW (and sometimes the host) on resume with traffic * tag 'wireless-2026-02-04' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: iwlwifi: mvm: pause TCM on fast resume wifi: iwlwifi: mld: cancel mlo_scan_start_wk ==================== Link: https://patch.msgid.link/20260204113547.159742-4-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-04net: cpsw: Execute ndo_set_rx_mode callback in a work queueKevin Hao1-6/+35
Commit 1767bb2d47b7 ("ipv6: mcast: Don't hold RTNL for IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP.") removed the RTNL lock for IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP operations. However, this change triggered the following call trace on my BeagleBone Black board: WARNING: net/8021q/vlan_core.c:236 at vlan_for_each+0x120/0x124, CPU#0: rpcbind/481 RTNL: assertion failed at net/8021q/vlan_core.c (236) Modules linked in: CPU: 0 UID: 997 PID: 481 Comm: rpcbind Not tainted 6.19.0-rc7-next-20260130-yocto-standard+ #35 PREEMPT Hardware name: Generic AM33XX (Flattened Device Tree) Call trace: unwind_backtrace from show_stack+0x28/0x2c show_stack from dump_stack_lvl+0x30/0x38 dump_stack_lvl from __warn+0xb8/0x11c __warn from warn_slowpath_fmt+0x130/0x194 warn_slowpath_fmt from vlan_for_each+0x120/0x124 vlan_for_each from cpsw_add_mc_addr+0x54/0x98 cpsw_add_mc_addr from __hw_addr_ref_sync_dev+0xc4/0xec __hw_addr_ref_sync_dev from __dev_mc_add+0x78/0x88 __dev_mc_add from igmp6_group_added+0x84/0xec igmp6_group_added from __ipv6_dev_mc_inc+0x1fc/0x2f0 __ipv6_dev_mc_inc from __ipv6_sock_mc_join+0x124/0x1b4 __ipv6_sock_mc_join from do_ipv6_setsockopt+0x84c/0x1168 do_ipv6_setsockopt from ipv6_setsockopt+0x88/0xc8 ipv6_setsockopt from do_sock_setsockopt+0xe8/0x19c do_sock_setsockopt from __sys_setsockopt+0x84/0xac __sys_setsockopt from ret_fast_syscall+0x0/0x54 This trace occurs because vlan_for_each() is called within cpsw_ndo_set_rx_mode(), which expects the RTNL lock to be held. Since modifying vlan_for_each() to operate without the RTNL lock is not straightforward, and because ndo_set_rx_mode() is invoked both with and without the RTNL lock across different code paths, simply adding rtnl_lock() in cpsw_ndo_set_rx_mode() is not a viable solution. To resolve this issue, we opt to execute the actual processing within a work queue, following the approach used by the icssg-prueth driver. Please note: To reproduce this issue, I manually reverted the changes to am335x-bone-common.dtsi from commit c477358e66a3 ("ARM: dts: am335x-bone: switch to new cpsw switch drv") in order to revert to the legacy cpsw driver. Fixes: 1767bb2d47b7 ("ipv6: mcast: Don't hold RTNL for IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP.") Signed-off-by: Kevin Hao <haokexin@gmail.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260203-bbb-v5-2-ea0ea217a85c@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-04net: cpsw_new: Execute ndo_set_rx_mode callback in a work queueKevin Hao2-5/+30
Commit 1767bb2d47b7 ("ipv6: mcast: Don't hold RTNL for IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP.") removed the RTNL lock for IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP operations. However, this change triggered the following call trace on my BeagleBone Black board: WARNING: net/8021q/vlan_core.c:236 at vlan_for_each+0x120/0x124, CPU#0: rpcbind/496 RTNL: assertion failed at net/8021q/vlan_core.c (236) Modules linked in: CPU: 0 UID: 997 PID: 496 Comm: rpcbind Not tainted 6.19.0-rc6-next-20260122-yocto-standard+ #8 PREEMPT Hardware name: Generic AM33XX (Flattened Device Tree) Call trace: unwind_backtrace from show_stack+0x28/0x2c show_stack from dump_stack_lvl+0x30/0x38 dump_stack_lvl from __warn+0xb8/0x11c __warn from warn_slowpath_fmt+0x130/0x194 warn_slowpath_fmt from vlan_for_each+0x120/0x124 vlan_for_each from cpsw_add_mc_addr+0x54/0xd8 cpsw_add_mc_addr from __hw_addr_ref_sync_dev+0xc4/0xec __hw_addr_ref_sync_dev from __dev_mc_add+0x78/0x88 __dev_mc_add from igmp6_group_added+0x84/0xec igmp6_group_added from __ipv6_dev_mc_inc+0x1fc/0x2f0 __ipv6_dev_mc_inc from __ipv6_sock_mc_join+0x124/0x1b4 __ipv6_sock_mc_join from do_ipv6_setsockopt+0x84c/0x1168 do_ipv6_setsockopt from ipv6_setsockopt+0x88/0xc8 ipv6_setsockopt from do_sock_setsockopt+0xe8/0x19c do_sock_setsockopt from __sys_setsockopt+0x84/0xac __sys_setsockopt from ret_fast_syscall+0x0/0x5 This trace occurs because vlan_for_each() is called within cpsw_ndo_set_rx_mode(), which expects the RTNL lock to be held. Since modifying vlan_for_each() to operate without the RTNL lock is not straightforward, and because ndo_set_rx_mode() is invoked both with and without the RTNL lock across different code paths, simply adding rtnl_lock() in cpsw_ndo_set_rx_mode() is not a viable solution. To resolve this issue, we opt to execute the actual processing within a work queue, following the approach used by the icssg-prueth driver. Fixes: 1767bb2d47b7 ("ipv6: mcast: Don't hold RTNL for IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP.") Signed-off-by: Kevin Hao <haokexin@gmail.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260203-bbb-v5-1-ea0ea217a85c@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-04gve: Correct ethtool rx_dropped calculationMax Yuan1-6/+17
The gve driver's "rx_dropped" statistic, exposed via `ethtool -S`, incorrectly includes `rx_buf_alloc_fail` counts. These failures represent an inability to allocate receive buffers, not true packet drops where a received packet is discarded. This misrepresentation can lead to inaccurate diagnostics. This patch rectifies the ethtool "rx_dropped" calculation. It removes `rx_buf_alloc_fail` from the total and adds `xdp_tx_errors` and `xdp_redirect_errors`, which represent legitimate packet drops within the XDP path. Cc: stable@vger.kernel.org Fixes: 433e274b8f7b ("gve: Add stats for gve.") Signed-off-by: Max Yuan <maxyuan@google.com> Reviewed-by: Jordan Rhee <jordanrhee@google.com> Reviewed-by: Joshua Washington <joshwash@google.com> Reviewed-by: Matt Olson <maolson@google.com> Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260202193925.3106272-3-hramamurthy@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-04gve: Fix stats report corruption on queue count changeDebarghya Kundu2-22/+36
The driver and the NIC share a region in memory for stats reporting. The NIC calculates its offset into this region based on the total size of the stats region and the size of the NIC's stats. When the number of queues is changed, the driver's stats region is resized. If the queue count is increased, the NIC can write past the end of the allocated stats region, causing memory corruption. If the queue count is decreased, there is a gap between the driver and NIC stats, leading to incorrect stats reporting. This change fixes the issue by allocating stats region with maximum size, and the offset calculation for NIC stats is changed to match with the calculation of the NIC. Cc: stable@vger.kernel.org Fixes: 24aeb56f2d38 ("gve: Add Gvnic stats AQ command and ethtool show/set-priv-flags.") Signed-off-by: Debarghya Kundu <debarghyak@google.com> Reviewed-by: Joshua Washington <joshwash@google.com> Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260202193925.3106272-2-hramamurthy@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-04net: ethernet: adi: adin1110: Check return value of ↵Chen Ni1-0/+3
devm_gpiod_get_optional() in adin1110_check_spi() The devm_gpiod_get_optional() function may return an ERR_PTR in case of genuine GPIO acquisition errors, not just NULL which indicates the legitimate absence of an optional GPIO. Add an IS_ERR() check after the call in adin1110_check_spi(). On error, return the error code to ensure proper failure handling rather than proceeding with invalid pointers. Fixes: 36934cac7aaf ("net: ethernet: adi: adin1110: add reset GPIO") Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20260202040228.4129097-1-nichen@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-03wifi: iwlwifi: mvm: pause TCM on fast resumeMiri Korenblit1-1/+5
Not pausing it means that we can have the TCM work queued into a non-freezable workqueue, which, in resume, is re-activated before the driver's resume is called. The TCM work might send commands to the FW before we resumed the device, leading to an assert. Closes: https://lore.kernel.org/linux-wireless/aTDoDiD55qlUZ0pn@debian.local/ Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> Fixes: e8bb19c1d590 ("wifi: iwlwifi: support fast resume") Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20260129212650.05621f3faedb.I44df9cf9183b5143df8078131e0d87c0fd7e1763@changeid
2026-02-03wifi: iwlwifi: mld: cancel mlo_scan_start_wkMiri Korenblit2-2/+2
mlo_scan_start_wk is not canceled on disconnection. In fact, it is not canceled anywhere except in the restart cleanup, where we don't really have to. This can cause an init-after-queue issue: if, for example, the work was queued and then drv_change_interface got executed. This can also cause use-after-free: if the work is executed after the vif is freed. Fixes: 9748ad82a9d9 ("wifi: iwlwifi: defer MLO scan after link activation") Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20260129212650.a36482a60719.I5bf64a108ca39dacb5ca0dcd8b7258a3ce8db74c@changeid
2026-02-03net: spacemit: k1-emac: fix jumbo frame supportTomas Hlavacek1-6/+15
The driver never programs the MAC frame size and jabber registers, causing the hardware to reject frames larger than the default 1518 bytes even when larger DMA buffers are allocated. Program MAC_MAXIMUM_FRAME_SIZE, MAC_TRANSMIT_JABBER_SIZE, and MAC_RECEIVE_JABBER_SIZE based on the configured MTU. Also fix the maximum buffer size from 4096 to 4095, since the descriptor buffer size field is only 12 bits. Account for double VLAN tags in frame size calculations. Fixes: bfec6d7f2001 ("net: spacemit: Add K1 Ethernet MAC") Cc: stable@vger.kernel.org Signed-off-by: Tomas Hlavacek <tmshlvck@gmail.com> Link: https://patch.msgid.link/20260130102301.477514-1-tmshlvck@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-03Merge branch '100GbE' of ↵Jakub Kicinski4-88/+136
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2026-01-30 (ice, i40e) This series contains updates to ice and i40e drivers. Grzegorz and Jake resolve issues around timing for E825 that can cause Tx timestamps to be missed/interrupts not generated on ice. Aaron Ma defers restart of PTP work until after after VSIs are rebuilt to prevent NULL pointer dereference for ice. Mohammad Heib removes calls to udp_tunnel_get_rx_info() in ice and i40e which violates locking expectations and is unneeded. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: i40e: drop udp_tunnel_get_rx_info() call from i40e_open() ice: drop udp_tunnel_get_rx_info() call from ndo_open() ice: Fix PTP NULL pointer dereference during VSI rebuild ice: PTP: fix missing timestamps on E825 hardware ice: fix missing TX timestamps interrupts on E825 devices ==================== Link: https://patch.msgid.link/20260130185401.1091523-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-03net: enetc: Convert 16-bit register reads to 32-bit for ENETC v4Claudiu Manoil2-4/+15
It is not recommended to access the 32‑bit registers of this hardware IP using lower‑width accessors (i.e. 16‑bit), and the only exception to this rule was introduced in the initial ENETC v1 driver for the PMAR1 register, which holds the lower 16 bits of the primary MAC address of an SI. Meanwhile, this exception has been replicated in the v4 driver code as well. Since LS1028 (the only SoC with ENETC v1) is not affected by this issue, the current patch converts the 16‑bit reads from PMAR1 starting with ENETC v4. Fixes: 99100d0d9922 ("net: enetc: add preliminary support for i.MX95 ENETC PF") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Wei Fang <wei.fang@nxp.com> Link: https://patch.msgid.link/20260130141035.272471-5-claudiu.manoil@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-03net: enetc: Convert 16-bit register writes to 32-bit for ENETC v4Claudiu Manoil1-2/+2
For ENETC v4, which is integrated into more complex SoCs (compared to v1), 16‑bit register writes are blocked in the SoC interconnect on some chips. To be fair, it is not recommended to access 32‑bit registers of this IP using lower‑width accessors (i.e. 16‑bit), and the only exception to this rule was introduced by me in the initial ENETC v1 driver for the PMAR1 register, which holds the lower 16 bits of the primary MAC address of an SI. Meanwhile, this exception has been replicated for v4 as well. Since LS1028 (the only SoC with ENETC v1) is not affected by this issue, the current patch fixes the 16‑bit writes to PMAR1 starting with ENETC v4. Fixes: 99100d0d9922 ("net: enetc: add preliminary support for i.MX95 ENETC PF") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Wei Fang <wei.fang@nxp.com> Link: https://patch.msgid.link/20260130141035.272471-4-claudiu.manoil@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-03net: enetc: Remove CBDR cacheability AXI settings for ENETC v4Claudiu Manoil1-4/+0
For ENETC v4 these settings are controlled by the global ENETC command cache attribute registers (EnCAR), from the IERB register block. The hardcoded CDBR cacheability settings were inherited from LS1028A, and should be removed from the ENETC v4 driver as they conflict with the global IERB settings. Fixes: e3f4a0a8ddb4 ("net: enetc: add command BD ring support for i.MX95 ENETC") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Wei Fang <wei.fang@nxp.com> Link: https://patch.msgid.link/20260130141035.272471-3-claudiu.manoil@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-03net: enetc: Remove SI/BDR cacheability AXI settings for ENETC v4Claudiu Manoil1-4/+7
For ENETC v4 these settings are controlled by the global ENETC message and buffer cache attribute registers (EnBCAR and EnMCAR), from the IERB register block. The hardcoded cacheability settings were inherited from LS1028A, and should be removed from the ENETC v4 driver as they conflict with the global IERB settings. Fixes: 99100d0d9922 ("net: enetc: add preliminary support for i.MX95 ENETC PF") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Wei Fang <wei.fang@nxp.com> Link: https://patch.msgid.link/20260130141035.272471-2-claudiu.manoil@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-03net: stmmac: fix stm32 (and potentially others) resume regressionRussell King (Oracle)1-1/+2
Marek reported that suspending stm32 causes the following errors when the interface is administratively down: $ echo devices > /sys/power/pm_test $ echo mem > /sys/power/state ... ck_ker_eth2stp already disabled ... ck_ker_eth2stp already unprepared ... On suspend, stm32 starts the eth2stp clock in its suspend method, and stops it in the resume method. This is because the blamed commit omits the call to the platform glue ->suspend() method, but does make the call to the platform glue ->resume() method. This problem affects all other converted drivers as well - e.g. looking at the PCIe drivers, pci_save_state() will not be called, but pci_restore_state() will be. Similar issues affect all other drivers. Fix this by always calling the ->suspend() method, even when the network interface is down. This fixes all the conversions to the platform glue ->suspend() and ->resume() methods. Link: https://lore.kernel.org/r/20260114081809.12758-1-marex@nabladev.com Fixes: 07bbbfe7addf ("net: stmmac: add suspend()/resume() platform ops") Reported-by: Marek Vasut <marex@nabladev.com> Tested-by: Marek Vasut <marex@nabladev.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1vlujh-00000007Hkw-2p6r@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-31net: usb: r8152: fix resume reset deadlockSergey Senozhatsky1-14/+15
rtl8152 can trigger device reset during reset which potentially can result in a deadlock: **** DPM device timeout after 10 seconds; 15 seconds until panic **** Call Trace: <TASK> schedule+0x483/0x1370 schedule_preempt_disabled+0x15/0x30 __mutex_lock_common+0x1fd/0x470 __rtl8152_set_mac_address+0x80/0x1f0 dev_set_mac_address+0x7f/0x150 rtl8152_post_reset+0x72/0x150 usb_reset_device+0x1d0/0x220 rtl8152_resume+0x99/0xc0 usb_resume_interface+0x3e/0xc0 usb_resume_both+0x104/0x150 usb_resume+0x22/0x110 The problem is that rtl8152 resume calls reset under tp->control mutex while reset basically re-enters rtl8152 and attempts to acquire the same tp->control lock once again. Reset INACCESSIBLE device outside of tp->control mutex scope to avoid recursive mutex_lock() deadlock. Fixes: 4933b066fefb ("r8152: If inaccessible at resume time, issue a reset") Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Link: https://patch.msgid.link/20260129031106.3805887-1-senozhatsky@chromium.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-31macvlan: fix error recovery in macvlan_common_newlink()Eric Dumazet1-2/+3
valis provided a nice repro to crash the kernel: ip link add p1 type veth peer p2 ip link set address 00:00:00:00:00:20 dev p1 ip link set up dev p1 ip link set up dev p2 ip link add mv0 link p2 type macvlan mode source ip link add invalid% link p2 type macvlan mode source macaddr add 00:00:00:00:00:20 ping -c1 -I p1 1.2.3.4 He also gave a very detailed analysis: <quote valis> The issue is triggered when a new macvlan link is created with MACVLAN_MODE_SOURCE mode and MACVLAN_MACADDR_ADD (or MACVLAN_MACADDR_SET) parameter, lower device already has a macvlan port and register_netdevice() called from macvlan_common_newlink() fails (e.g. because of the invalid link name). In this case macvlan_hash_add_source is called from macvlan_change_sources() / macvlan_common_newlink(): This adds a reference to vlan to the port's vlan_source_hash using macvlan_source_entry. vlan is a pointer to the priv data of the link that is being created. When register_netdevice() fails, the error is returned from macvlan_newlink() to rtnl_newlink_create(): if (ops->newlink) err = ops->newlink(dev, &params, extack); else err = register_netdevice(dev); if (err < 0) { free_netdev(dev); goto out; } and free_netdev() is called, causing a kvfree() on the struct net_device that is still referenced in the source entry attached to the lower device's macvlan port. Now all packets sent on the macvlan port with a matching source mac address will trigger a use-after-free in macvlan_forward_source(). </quote valis> With all that, my fix is to make sure we call macvlan_flush_sources() regardless of @create value whenever "goto destroy_macvlan_port;" path is taken. Many thanks to valis for following up on this issue. Fixes: aa5fd0fb7748 ("driver: macvlan: Destroy new macvlan port if macvlan_common_newlink failed.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: valis <sec@valis.email> Reported-by: syzbot+7182fbe91e58602ec1fe@syzkaller.appspotmail.com Closes: https: //lore.kernel.org/netdev/695fb1e8.050a0220.1c677c.039f.GAE@google.com/T/#u Cc: Boudewijn van der Heide <boudewijn@delta-utec.com> Link: https://patch.msgid.link/20260129204359.632556-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-31net: sfp: Fix quirk for Ubiquiti U-Fiber Instant SFP moduleMarek Behún1-0/+2
Commit fd580c9830316eda ("net: sfp: augment SFP parsing with phy_interface_t bitmap") did not add augumentation for the interface bitmap in the quirk for Ubiquiti U-Fiber Instant. The subsequent commit f81fa96d8a6c7a77 ("net: phylink: use phy_interface_t bitmaps for optical modules") then changed phylink code for selection of SFP interface: instead of using link mode bitmap, the interface bitmap is used, and the fastest interface mode supported by both SFP module and MAC is chosen. Since the interface bitmap contains also modes faster than 1000base-x, this caused a regression wherein this module stopped working out-of-the-box. Fix this. Fixes: fd580c9830316eda ("net: sfp: augment SFP parsing with phy_interface_t bitmap") Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20260129082227.17443-1-kabel@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-30i40e: drop udp_tunnel_get_rx_info() call from i40e_open()Mohammad Heib1-1/+0
The i40e driver calls udp_tunnel_get_rx_info() during i40e_open(). This is redundant because UDP tunnel RX offload state is preserved across device down/up cycles. The udp_tunnel core handles synchronization automatically when required. Furthermore, recent changes in the udp_tunnel infrastructure require querying RX info while holding the udp_tunnel lock. Calling it directly from the ndo_open path violates this requirement, triggering the following lockdep warning: Call Trace: <TASK> ? __udp_tunnel_nic_assert_locked+0x39/0x40 [udp_tunnel] i40e_open+0x135/0x14f [i40e] __dev_open+0x121/0x2e0 __dev_change_flags+0x227/0x270 dev_change_flags+0x3d/0xb0 devinet_ioctl+0x56f/0x860 sock_do_ioctl+0x7b/0x130 __x64_sys_ioctl+0x91/0xd0 do_syscall_64+0x90/0x170 ... </TASK> Remove the redundant and unsafe call to udp_tunnel_get_rx_info() from i40e_open() resolve the locking violation. Fixes: 1ead7501094c ("udp_tunnel: remove rtnl_lock dependency") Signed-off-by: Mohammad Heib <mheib@redhat.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2026-01-30ice: drop udp_tunnel_get_rx_info() call from ndo_open()Mohammad Heib1-3/+0
The ice driver calls udp_tunnel_get_rx_info() during ice_open_internal(). This is redundant because UDP tunnel RX offload state is preserved across device down/up cycles. The udp_tunnel core handles synchronization automatically when required. Furthermore, recent changes in the udp_tunnel infrastructure require querying RX info while holding the udp_tunnel lock. Calling it directly from the ndo_open path violates this requirement, triggering the following lockdep warning: Call Trace: <TASK> ice_open_internal+0x253/0x350 [ice] __udp_tunnel_nic_assert_locked+0x86/0xb0 [udp_tunnel] __dev_open+0x2f5/0x880 __dev_change_flags+0x44c/0x660 netif_change_flags+0x80/0x160 devinet_ioctl+0xd21/0x15f0 inet_ioctl+0x311/0x350 sock_ioctl+0x114/0x220 __x64_sys_ioctl+0x131/0x1a0 ... </TASK> Remove the redundant and unsafe call to udp_tunnel_get_rx_info() from ice_open_internal() to resolve the locking violation Fixes: 1ead7501094c ("udp_tunnel: remove rtnl_lock dependency") Signed-off-by: Mohammad Heib <mheib@redhat.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2026-01-30ice: Fix PTP NULL pointer dereference during VSI rebuildAaron Ma3-5/+29
Fix race condition where PTP periodic work runs while VSI is being rebuilt, accessing NULL vsi->rx_rings. The sequence was: 1. ice_ptp_prepare_for_reset() cancels PTP work 2. ice_ptp_rebuild() immediately queues PTP work 3. VSI rebuild happens AFTER ice_ptp_rebuild() 4. PTP work runs and accesses NULL vsi->rx_rings Fix: Keep PTP work cancelled during rebuild, only queue it after VSI rebuild completes in ice_rebuild(). Added ice_ptp_queue_work() helper function to encapsulate the logic for queuing PTP work, ensuring it's only queued when PTP is supported and the state is ICE_PTP_READY. Error log: [ 121.392544] ice 0000:60:00.1: PTP reset successful [ 121.392692] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 121.392712] #PF: supervisor read access in kernel mode [ 121.392720] #PF: error_code(0x0000) - not-present page [ 121.392727] PGD 0 [ 121.392734] Oops: Oops: 0000 [#1] SMP NOPTI [ 121.392746] CPU: 8 UID: 0 PID: 1005 Comm: ice-ptp-0000:60 Tainted: G S 6.19.0-rc6+ #4 PREEMPT(voluntary) [ 121.392761] Tainted: [S]=CPU_OUT_OF_SPEC [ 121.392773] RIP: 0010:ice_ptp_update_cached_phctime+0xbf/0x150 [ice] [ 121.393042] Call Trace: [ 121.393047] <TASK> [ 121.393055] ice_ptp_periodic_work+0x69/0x180 [ice] [ 121.393202] kthread_worker_fn+0xa2/0x260 [ 121.393216] ? __pfx_ice_ptp_periodic_work+0x10/0x10 [ice] [ 121.393359] ? __pfx_kthread_worker_fn+0x10/0x10 [ 121.393371] kthread+0x10d/0x230 [ 121.393382] ? __pfx_kthread+0x10/0x10 [ 121.393393] ret_from_fork+0x273/0x2b0 [ 121.393407] ? __pfx_kthread+0x10/0x10 [ 121.393417] ret_from_fork_asm+0x1a/0x30 [ 121.393432] </TASK> Fixes: 803bef817807d ("ice: factor out ice_ptp_rebuild_owner()") Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2026-01-30ice: PTP: fix missing timestamps on E825 hardwareJacob Keller3-78/+103
The E825 hardware currently has each PF handle the PFINT_TSYN_TX cause of the miscellaneous OICR interrupt vector. The actual interrupt cause underlying this is shared by all ports on the same quad: ┌─────────────────────────────────┐ │ │ │ ┌────┐ ┌────┐ ┌────┐ ┌────┐ │ │ │PF 0│ │PF 1│ │PF 2│ │PF 3│ │ │ └────┘ └────┘ └────┘ └────┘ │ │ │ └────────────────▲────────────────┘ │ │ ┌────────────────┼────────────────┐ │ PHY QUAD │ └───▲────────▲────────▲────────▲──┘ │ │ │ │ ┌───┼──┐ ┌───┴──┐ ┌───┼──┐ ┌───┼──┐ │Port 0│ │Port 1│ │Port 2│ │Port 3│ └──────┘ └──────┘ └──────┘ └──────┘ If multiple PFs issue Tx timestamp requests near simultaneously, it is possible that the correct PF will not be interrupted and will miss its timestamp. Understanding why is somewhat complex. Consider the following sequence of events: CPU 0: Send Tx packet on PF 0 ... PF 0 enqueues packet with Tx request CPU 1, PF1: ... Send Tx packet on PF1 ... PF 1 enqueues packet with Tx request HW: PHY Port 0 sends packet PHY raises Tx timestamp event interrupt MAC raises each PF interrupt CPU 0, PF0: CPU 1, PF1: ice_misc_intr() checks for Tx timestamps ice_misc_intr() checks for Tx timestamp Sees packet ready bit set Sees nothing available ... Exits ... ... HW: PHY port 1 sends packet PHY interrupt ignored because not all packet timestamps read yet. ... Read timestamp, report to stack Because the interrupt event is shared for all ports on the same quad, the PHY will not raise a new interrupt for any PF until all timestamps are read. In the example above, the second timestamp comes in for port 1 before the timestamp from port 0 is read. At this point, there is no longer an interrupt thread running that will read the timestamps, because each PF has checked and found that there was no work to do. Applications such as ptp4l will timeout after waiting a few milliseconds. Eventually, the watchdog service task will re-check for all quads and notice that there are outstanding timestamps, and issue a software interrupt to recover. However, by this point it is far too late, and applications have already failed. All of this occurs because of the underlying hardware behavior. The PHY cannot raise a new interrupt signal until all outstanding timestamps have been read. As a first step to fix this, switch the E825C hardware to the ICE_PTP_TX_INTERRUPT_ALL mode. In this mode, only the clock owner PF will respond to the PFINT_TSYN_TX cause. Other PFs disable this cause and will not wake. In this mode, the clock owner will iterate over all ports and handle timestamps for each connected port. This matches the E822 behavior, and is a necessary but insufficient step to resolve the missing timestamps. Even with use of the ICE_PTP_TX_INTERRUPT_ALL mode, we still sometimes miss a timestamp event. The ice_ptp_tx_tstamp_owner() does re-check the ready bitmap, but does so before re-enabling the OICR interrupt vector. It also only checks the ready bitmap, but not the software Tx timestamp tracker. To avoid risk of losing a timestamp, refactor the logic to check both the software Tx timestamp tracker bitmap *and* the hardware ready bitmap. Additionally, do this outside of ice_ptp_process_ts() after we have already re-enabled the OICR interrupt. Remove the checks from the ice_ptp_tx_tstamp(), ice_ptp_tx_tstamp_owner(), and the ice_ptp_process_ts() functions. This results in ice_ptp_tx_tstamp() being nothing more than a wrapper around ice_ptp_process_tx_tstamp() so we can remove it. Add the ice_ptp_tx_tstamps_pending() function which returns a boolean indicating if there are any pending Tx timestamps. First, check the software timestamp tracker bitmap. In ICE_PTP_TX_INTERRUPT_ALL mode, check *all* ports software trackers. If a tracker has outstanding timestamp requests, return true. Additionally, check the PHY ready bitmap to confirm if the PHY indicates any outstanding timestamps. In the ice_misc_thread_fn(), call ice_ptp_tx_tstamps_pending() just before returning from the IRQ thread handler. If it returns true, write to PFINT_OICR to trigger a PFINT_OICR_TSYN_TX_M software interrupt. This will force the handler to interrupt again and complete the work even if the PHY hardware did not interrupt for any reason. This results in the following new flow for handling Tx timestamps: 1) send Tx packet 2) PHY captures timestamp 3) PHY triggers MAC interrupt 4) clock owner executes ice_misc_intr() with PFINT_OICR_TSYN_TX flag set 5) ice_ptp_ts_irq() returns IRQ_WAKE_THREAD 7) The interrupt thread wakes up and kernel calls ice_misc_intr_thread_fn() 8) ice_ptp_process_ts() is called to handle any outstanding timestamps 9) ice_irq_dynamic_ena() is called to re-enable the OICR hardware interrupt cause 10) ice_ptp_tx_tstamps_pending() is called to check if we missed any more outstanding timestamps, checking both software and hardware indicators. With this change, it should no longer be possible for new timestamps to come in such a way that we lose an interrupt. If a timestamp comes in before the ice_ptp_tx_tstamps_pending() call, it will be noticed by at least one of the software bitmap check or the hardware bitmap check. If the timestamp comes in *after* this check, it should cause a timestamp interrupt as we have already read all timestamps from the PHY and the OICR vector has been re-enabled. Fixes: 7cab44f1c35f ("ice: Introduce ETH56G PHY model for E825C products") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Przemyslaw Korba <przemyslaw.korba@intel.com> Tested-by: Vitaly Grinberg <vgrinber@redhat.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2026-01-30ice: fix missing TX timestamps interrupts on E825 devicesGrzegorz Nitka1-1/+4
Modify PTP (Precision Time Protocol) configuration on link down flow. Previously, PHY_REG_TX_OFFSET_READY register was cleared in such case. This register is used to determine if the timestamp is valid or not on the hardware side. However, there is a possibility that there is still the packet in the HW queue which originally was supposed to be timestamped but the link is already down and given register is cleared. This potentially might lead to the situation in which that 'delayed' packet's timestamp is treated as invalid one when the link is up again. This in turn leads to the situation in which the driver is not able to effectively clean timestamp memory and interrupt configuration. From the hardware perspective, that 'old' interrupt was not handled properly and even if new timestamp packets are processed, no new interrupts is generated. As a result, providing timestamps to the user applications (like ptp4l) is not possible. The solution for this problem is implemented at the driver level rather than the firmware, and maintains the tx_ready bit high, even during link down events. This avoids entering a potential inconsistent state between the driver and the timestamp hardware. Testing hints: - run PTP traffic at higher rate (like 16 PTP messages per second) - observe ptp4l behaviour at the client side in the following conditions: a) trigger link toggle events. It needs to be physiscal link down/up events b) link speed change In all above cases, PTP processing at ptp4l application should resume always. In failure case, the following permanent error message in ptp4l log was observed: controller-0 ptp4l: err [6175.116] ptp4l-legacy timed out while polling for tx timestamp Fixes: 7cab44f1c35f ("ice: Introduce ETH56G PHY model for E825C products") Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2026-01-30dpaa2-switch: add bounds check for if_id in IRQ handlerJunrui Luo1-0/+4
The IRQ handler extracts if_id from the upper 16 bits of the hardware status register and uses it to index into ethsw->ports[] without validation. Since if_id can be any 16-bit value (0-65535) but the ports array is only allocated with sw_attr.num_ifs elements, this can lead to an out-of-bounds read potentially. Add a bounds check before accessing the array, consistent with the existing validation in dpaa2_switch_rx(). Reported-by: Yuhao Jiang <danisjiang@gmail.com> Reported-by: Junrui Luo <moonafterrain@outlook.com> Fixes: 24ab724f8a46 ("dpaa2-switch: use the port index in the IRQ handler") Signed-off-by: Junrui Luo <moonafterrain@outlook.com> Link: https://patch.msgid.link/SYBPR01MB7881D420AB43FF1A227B84AFAF91A@SYBPR01MB7881.ausprd01.prod.outlook.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-30net: liquidio: Fix off-by-one error in VF setup_nic_devices() cleanupZilin Guan1-2/+2
In setup_nic_devices(), the initialization loop jumps to the label setup_nic_dev_free on failure. The current cleanup loop while(i--) skip the failing index i, causing a memory leak. Fix this by changing the loop to iterate from the current index i down to 0. Compile tested only. Issue found using code review. Fixes: 846b46873eeb ("liquidio CN23XX: VF offload features") Suggested-by: Simon Horman <horms@kernel.org> Signed-off-by: Zilin Guan <zilin@seu.edu.cn> Reviewed-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20260128154440.278369-4-zilin@seu.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-30net: liquidio: Fix off-by-one error in PF setup_nic_devices() cleanupZilin Guan1-2/+3
In setup_nic_devices(), the initialization loop jumps to the label setup_nic_dev_free on failure. The current cleanup loop while(i--) skip the failing index i, causing a memory leak. Fix this by changing the loop to iterate from the current index i down to 0. Also, decrement i in the devlink_alloc failure path to point to the last successfully allocated index. Compile tested only. Issue found using code review. Fixes: f21fb3ed364b ("Add support of Cavium Liquidio ethernet adapters") Suggested-by: Simon Horman <horms@kernel.org> Signed-off-by: Zilin Guan <zilin@seu.edu.cn> Reviewed-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20260128154440.278369-3-zilin@seu.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-30net: liquidio: Initialize netdev pointer before queue setupZilin Guan1-17/+17
In setup_nic_devices(), the netdev is allocated using alloc_etherdev_mq(). However, the pointer to this structure is stored in oct->props[i].netdev only after the calls to netif_set_real_num_rx_queues() and netif_set_real_num_tx_queues(). If either of these functions fails, setup_nic_devices() returns an error without freeing the allocated netdev. Since oct->props[i].netdev is still NULL at this point, the cleanup function liquidio_destroy_nic_device() will fail to find and free the netdev, resulting in a memory leak. Fix this by initializing oct->props[i].netdev before calling the queue setup functions. This ensures that the netdev is properly accessible for cleanup in case of errors. Compile tested only. Issue found using a prototype static analysis tool and code review. Fixes: c33c997346c3 ("liquidio: enhanced ethtool --set-channels feature") Signed-off-by: Zilin Guan <zilin@seu.edu.cn> Reviewed-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20260128154440.278369-2-zilin@seu.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-30dpaa2-switch: prevent ZERO_SIZE_PTR dereference when num_ifs is zeroJunrui Luo1-0/+6
The driver allocates arrays for ports, FDBs, and filter blocks using kcalloc() with ethsw->sw_attr.num_ifs as the element count. When the device reports zero interfaces (either due to hardware configuration or firmware issues), kcalloc(0, ...) returns ZERO_SIZE_PTR (0x10) instead of NULL. Later in dpaa2_switch_probe(), the NAPI initialization unconditionally accesses ethsw->ports[0]->netdev, which attempts to dereference ZERO_SIZE_PTR (address 0x10), resulting in a kernel panic. Add a check to ensure num_ifs is greater than zero after retrieving device attributes. This prevents the zero-sized allocations and subsequent invalid pointer dereference. Reported-by: Yuhao Jiang <danisjiang@gmail.com> Reported-by: Junrui Luo <moonafterrain@outlook.com> Fixes: 0b1b71370458 ("staging: dpaa2-switch: handle Rx path on control interface") Signed-off-by: Junrui Luo <moonafterrain@outlook.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/SYBPR01MB7881BEABA8DA896947962470AF91A@SYBPR01MB7881.ausprd01.prod.outlook.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-29net/mlx5e: Skip ESN replay window setup for IPsec crypto offloadJianbo Liu1-1/+2
Commit a5e400a985df ("net/mlx5e: Honor user choice of IPsec replay window size") introduced logic to setup the ESN replay window size. This logic is only valid for packet offload. However, the check to skip this block only covered outbound offloads. It was not skipped for crypto offload, causing it to fall through to the new switch statement and trigger its WARN_ON default case (for instance, if a window larger than 256 bits was configured). Fix this by amending the condition to also skip the replay window setup if the offload type is not XFRM_DEV_OFFLOAD_PACKET. Fixes: a5e400a985df ("net/mlx5e: Honor user choice of IPsec replay window size") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1769503961-124173-5-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-29net/mlx5: Fix vhca_id access call trace use before allocParav Pandit4-11/+21
HCA CAP structure is allocated in mlx5_hca_caps_alloc(). mlx5_mdev_init() mlx5_hca_caps_alloc() And HCA CAP is read from the device in mlx5_init_one(). The vhca_id's debugfs file is published even before above two operations are done. Due to this when user reads the vhca id before the initialization, following call trace is observed. Fix this by deferring debugfs publication until the HCA CAP is allocated and read from the device. BUG: kernel NULL pointer dereference, address: 0000000000000004 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 23 UID: 0 PID: 6605 Comm: cat Kdump: loaded Not tainted 6.18.0-rc7-sf+ #110 PREEMPT(full) Hardware name: Supermicro SYS-6028U-TR4+/X10DRU-i+, BIOS 2.0b 08/09/2016 RIP: 0010:vhca_id_show+0x17/0x30 [mlx5_core] Code: cb 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 8b 47 70 48 c7 c6 45 f0 12 c1 48 8b 80 70 03 00 00 <8b> 50 04 0f ca 0f b7 d2 e8 8c 82 47 cb 31 c0 c3 cc cc cc cc 0f 1f RSP: 0018:ffffd37f4f337d40 EFLAGS: 00010203 RAX: 0000000000000000 RBX: ffff8f18445c9b40 RCX: 0000000000000001 RDX: ffff8f1109825180 RSI: ffffffffc112f045 RDI: ffff8f18445c9b40 RBP: 0000000000000000 R08: 0000645eac0d2928 R09: 0000000000000006 R10: ffffd37f4f337d48 R11: 0000000000000000 R12: ffffd37f4f337dd8 R13: ffffd37f4f337db0 R14: ffff8f18445c9b68 R15: 0000000000000001 FS: 00007f3eea099580(0000) GS:ffff8f2090f1f000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000004 CR3: 00000008b64e4006 CR4: 00000000003726f0 Call Trace: <TASK> seq_read_iter+0x11f/0x4f0 ? _raw_spin_unlock+0x15/0x30 ? do_anonymous_page+0x104/0x810 seq_read+0xf6/0x120 ? srso_alias_untrain_ret+0x1/0x10 full_proxy_read+0x5c/0x90 vfs_read+0xad/0x320 ? handle_mm_fault+0x1ab/0x290 ksys_read+0x52/0xd0 do_syscall_64+0x61/0x11e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fixes: dd3dd7263cde ("net/mlx5: Expose vhca_id to debugfs") Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Shay Drori <shayd@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1769503961-124173-4-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-29net/mlx5: fs, Fix inverted cap check in tx flow table root disconnectShay Drory1-1/+2
The capability check for reset_root_to_default was inverted, causing the function to return -EOPNOTSUPP when the capability IS supported, rather than when it is NOT supported. Fix the capability check condition. Fixes: 3c9c34c32bc6 ("net/mlx5: fs, Command to control TX flow table root") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1769503961-124173-2-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-29net: phy: micrel: fix clk warning when removing the driverWei Fang1-4/+13
Since the commit 25c6a5ab151f ("net: phy: micrel: Dynamically control external clock of KSZ PHY"), the clock of Micrel PHY has been enabled by phy_driver::resume() and disabled by phy_driver::suspend(). However, devm_clk_get_optional_enabled() is used in kszphy_probe(), so the clock will automatically be disabled when the device is unbound from the bus. Therefore, this could cause the clock to be disabled twice, resulting in clk driver warnings. For example, this issue can be reproduced on i.MX6ULL platform, and we can see the following logs when removing the FEC MAC drivers. $ echo 2188000.ethernet > /sys/bus/platform/drivers/fec/unbind $ echo 20b4000.ethernet > /sys/bus/platform/drivers/fec/unbind [ 109.758207] ------------[ cut here ]------------ [ 109.758240] WARNING: drivers/clk/clk.c:1188 at clk_core_disable+0xb4/0xd0, CPU#0: sh/639 [ 109.771011] enet2_ref already disabled [ 109.793359] Call trace: [ 109.822006] clk_core_disable from clk_disable+0x28/0x34 [ 109.827340] clk_disable from clk_disable_unprepare+0xc/0x18 [ 109.833029] clk_disable_unprepare from devm_clk_release+0x1c/0x28 [ 109.839241] devm_clk_release from devres_release_all+0x98/0x100 [ 109.845278] devres_release_all from device_unbind_cleanup+0xc/0x70 [ 109.851571] device_unbind_cleanup from device_release_driver_internal+0x1a4/0x1f4 [ 109.859170] device_release_driver_internal from bus_remove_device+0xbc/0xe4 [ 109.866243] bus_remove_device from device_del+0x140/0x458 [ 109.871757] device_del from phy_mdio_device_remove+0xc/0x24 [ 109.877452] phy_mdio_device_remove from mdiobus_unregister+0x40/0xac [ 109.883918] mdiobus_unregister from fec_enet_mii_remove+0x40/0x78 [ 109.890125] fec_enet_mii_remove from fec_drv_remove+0x4c/0x158 [ 109.896076] fec_drv_remove from device_release_driver_internal+0x17c/0x1f4 [ 109.962748] WARNING: drivers/clk/clk.c:1047 at clk_core_unprepare+0xfc/0x13c, CPU#0: sh/639 [ 109.975805] enet2_ref already unprepared [ 110.002866] Call trace: [ 110.031758] clk_core_unprepare from clk_unprepare+0x24/0x2c [ 110.037440] clk_unprepare from devm_clk_release+0x1c/0x28 [ 110.042957] devm_clk_release from devres_release_all+0x98/0x100 [ 110.048989] devres_release_all from device_unbind_cleanup+0xc/0x70 [ 110.055280] device_unbind_cleanup from device_release_driver_internal+0x1a4/0x1f4 [ 110.062877] device_release_driver_internal from bus_remove_device+0xbc/0xe4 [ 110.069950] bus_remove_device from device_del+0x140/0x458 [ 110.075469] device_del from phy_mdio_device_remove+0xc/0x24 [ 110.081165] phy_mdio_device_remove from mdiobus_unregister+0x40/0xac [ 110.087632] mdiobus_unregister from fec_enet_mii_remove+0x40/0x78 [ 110.093836] fec_enet_mii_remove from fec_drv_remove+0x4c/0x158 [ 110.099782] fec_drv_remove from device_release_driver_internal+0x17c/0x1f4 After analyzing the process of removing the FEC driver, as shown below, it can be seen that the clock was disabled twice by the PHY driver. fec_drv_remove() --> fec_enet_close() --> phy_stop() --> phy_suspend() --> kszphy_suspend() #1 The clock is disabled --> fec_enet_mii_remove() --> mdiobus_unregister() --> phy_mdio_device_remove() --> device_del() --> devm_clk_release() #2 The clock is disabled again Therefore, devm_clk_get_optional() is used to fix the above issue. And to avoid the issue mentioned by the commit 985329462723 ("net: phy: micrel: use devm_clk_get_optional_enabled for the rmii-ref clock"), the clock is enabled by clk_prepare_enable() to get the correct clock rate. Fixes: 25c6a5ab151f ("net: phy: micrel: Dynamically control external clock of KSZ PHY") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20260126081544.983517-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-29net/mlx5e: don't assume psp tx skbs are ipv6 csum handlingDaniel Zahka1-6/+11
mlx5e_psp_handle_tx_skb() assumes skbs are ipv6 when doing a partial TCP checksum with tso. Make correctly mlx5e_psp_handle_tx_skb() handle ipv4 packets. Fixes: e5a1861a298e ("net/mlx5e: Implement PSP Tx data path") Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Link: https://patch.msgid.link/20260126-dzahka-fix-tx-csum-partial-v2-1-0a905590ea5f@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-29Merge branch '10GbE' of ↵Jakub Kicinski3-21/+16
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2026-01-27 (ixgbe, ice) For ixgbe: Kohei Enju adjusts the cleanup path on firmware error to resolve some memory leaks and removes an instance of double init, free on ACI mutex. For ice: Aaron Ma adds NULL checks for q_vectors to avoid NULL pointer dereference. Jesse Brandeburg removes UDP checksum mismatch from being counted in Rx errors. * '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: stop counting UDP csum mismatch as rx_errors ice: Fix NULL pointer dereference in ice_vsi_set_napi_queues ixgbe: don't initialize aci lock in ixgbe_recovery_probe() ixgbe: fix memory leaks in the ixgbe_recovery_probe() path ==================== Link: https://patch.msgid.link/20260127223047.3979404-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-28gve: fix probe failure if clock read failsJordan Rhee5-15/+14
If timestamping is supported, GVE reads the clock during probe, which can fail for various reasons. Previously, this failure would abort the driver probe, rendering the device unusable. This behavior has been observed on production GCP VMs, causing driver initialization to fail completely. This patch allows the driver to degrade gracefully. If gve_init_clock() fails, it logs a warning and continues loading the driver without PTP support. Cc: stable@vger.kernel.org Fixes: a479a27f4da4 ("gve: Move gve_init_clock to after AQ CONFIGURE_DEVICE_RESOURCES call") Signed-off-by: Jordan Rhee <jordanrhee@google.com> Reviewed-by: Shachar Raindel <shacharr@google.com> Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com> Link: https://patch.msgid.link/20260127010210.969823-1-hramamurthy@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-28net/mlx5e: Account for netdev stats in ndo_get_stats64Gal Pressman1-9/+11
The driver's ndo_get_stats64 callback is only reporting mlx5 counters, without accounting for the netdev stats, causing errors from the network stack to be invisible in statistics. Add netdev_stats_to_stats64() call to first populate the counters, then add mlx5 counters on top, ensuring both are accounted for (where appropriate). Fixes: f62b8bb8f2d3 ("net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality") Signed-off-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/1769411695-18820-4-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-28net/mlx5e: TC, delete flows only for existing peersMark Bloch1-6/+13
When deleting TC steering flows, iterate only over actual devcom peers instead of assuming all possible ports exist. This avoids touching non-existent peers and ensures cleanup is limited to devices the driver is currently connected to. BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 133c8a067 P4D 0 Oops: Oops: 0002 [#1] SMP CPU: 19 UID: 0 PID: 2169 Comm: tc Not tainted 6.18.0+ #156 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5e_tc_del_fdb_peers_flow+0xbe/0x200 [mlx5_core] Code: 00 00 a8 08 74 a8 49 8b 46 18 f6 c4 02 74 9f 4c 8d bf a0 12 00 00 4c 89 ff e8 0e e7 96 e1 49 8b 44 24 08 49 8b 0c 24 4c 89 ff <48> 89 41 08 48 89 08 49 89 2c 24 49 89 5c 24 08 e8 7d ce 96 e1 49 RSP: 0018:ff11000143867528 EFLAGS: 00010246 RAX: 0000000000000000 RBX: dead000000000122 RCX: 0000000000000000 RDX: ff11000143691580 RSI: ff110001026e5000 RDI: ff11000106f3d2a0 RBP: dead000000000100 R08: 00000000000003fd R09: 0000000000000002 R10: ff11000101c75690 R11: ff1100085faea178 R12: ff11000115f0ae78 R13: 0000000000000000 R14: ff11000115f0a800 R15: ff11000106f3d2a0 FS: 00007f35236bf740(0000) GS:ff110008dc809000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000157a01001 CR4: 0000000000373eb0 Call Trace: <TASK> mlx5e_tc_del_flow+0x46/0x270 [mlx5_core] mlx5e_flow_put+0x25/0x50 [mlx5_core] mlx5e_delete_flower+0x2a6/0x3e0 [mlx5_core] tc_setup_cb_reoffload+0x20/0x80 fl_reoffload+0x26f/0x2f0 [cls_flower] ? mlx5e_tc_reoffload_flows_work+0xc0/0xc0 [mlx5_core] ? mlx5e_tc_reoffload_flows_work+0xc0/0xc0 [mlx5_core] tcf_block_playback_offloads+0x9e/0x1c0 tcf_block_unbind+0x7b/0xd0 tcf_block_setup+0x186/0x1d0 tcf_block_offload_cmd.isra.0+0xef/0x130 tcf_block_offload_unbind+0x43/0x70 __tcf_block_put+0x85/0x160 ingress_destroy+0x32/0x110 [sch_ingress] __qdisc_destroy+0x44/0x100 qdisc_graft+0x22b/0x610 tc_get_qdisc+0x183/0x4d0 rtnetlink_rcv_msg+0x2d7/0x3d0 ? rtnl_calcit.isra.0+0x100/0x100 netlink_rcv_skb+0x53/0x100 netlink_unicast+0x249/0x320 ? __alloc_skb+0x102/0x1f0 netlink_sendmsg+0x1e3/0x420 __sock_sendmsg+0x38/0x60 ____sys_sendmsg+0x1ef/0x230 ? copy_msghdr_from_user+0x6c/0xa0 ___sys_sendmsg+0x7f/0xc0 ? ___sys_recvmsg+0x8a/0xc0 ? __sys_sendto+0x119/0x180 __sys_sendmsg+0x61/0xb0 do_syscall_64+0x55/0x640 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f35238bb764 Code: 15 b9 86 0c 00 f7 d8 64 89 02 b8 ff ff ff ff eb bf 0f 1f 44 00 00 f3 0f 1e fa 80 3d e5 08 0d 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 4c c3 0f 1f 00 55 48 89 e5 48 83 ec 20 89 55 RSP: 002b:00007ffed4c35638 EFLAGS: 00000202 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000055a2efcc75e0 RCX: 00007f35238bb764 RDX: 0000000000000000 RSI: 00007ffed4c356a0 RDI: 0000000000000003 RBP: 00007ffed4c35710 R08: 0000000000000010 R09: 00007f3523984b20 R10: 0000000000000004 R11: 0000000000000202 R12: 00007ffed4c35790 R13: 000000006947df8f R14: 000055a2efcc75e0 R15: 00007ffed4c35780 Fixes: 9be6c21fdcf8 ("net/mlx5e: Handle offloads flows per peer") Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Shay Drori <shayd@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/1769411695-18820-3-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-28net/mlx5: Fix Unbinding uplink-netdev in switchdev modeShay Drory5-0/+46
It is possible to unbind the uplink ETH driver while the E-Switch is in switchdev mode. This leads to netdevice reference counting issues[1], as the driver removal path was not designed to clean up from this state. During uplink ETH driver removal (_mlx5e_remove), the code now waits for any concurrent E-Switch mode transition to finish. It then removes the REPs auxiliary device, if exists. This ensures a graceful cleanup. [1] unregister_netdevice: waiting for eth2 to become free. Usage count = 2 ref_tracker: netdev@00000000c912e04b has 1/1 users at ib_device_set_netdev+0x130/0x270 [ib_core] mlx5_ib_vport_rep_load+0xf4/0x3e0 [mlx5_ib] mlx5_esw_offloads_rep_load+0xc7/0xe0 [mlx5_core] esw_offloads_enable+0x583/0x900 [mlx5_core] mlx5_eswitch_enable_locked+0x1b2/0x290 [mlx5_core] mlx5_devlink_eswitch_mode_set+0x107/0x3e0 [mlx5_core] devlink_nl_eswitch_set_doit+0x60/0xd0 genl_family_rcv_msg_doit+0xe0/0x130 genl_rcv_msg+0x183/0x290 netlink_rcv_skb+0x4b/0xf0 genl_rcv+0x24/0x40 netlink_unicast+0x255/0x380 netlink_sendmsg+0x1f3/0x420 __sock_sendmsg+0x38/0x60 __sys_sendto+0x119/0x180 __x64_sys_sendto+0x20/0x30 Fixes: 7a9fb35e8c3a ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/1769411695-18820-2-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-28ice: stop counting UDP csum mismatch as rx_errorsJesse Brandeburg1-1/+0
Since the beginning, the Intel ice driver has counted receive checksum offload mismatches into the rx_errors member of the rtnl_link_stats64 struct. In ethtool -S these show up as rx_csum_bad.nic. I believe counting these in rx_errors is fundamentally wrong, as it's pretty clear from the comments in if_link.h and from every other statistic the driver is summing into rx_errors, that all of them would cause a "hardware drop" except for the UDP checksum mismatch, as well as the fact that all the other causes for rx_errors are L2 reasons, and this L4 UDP "mismatch" is an outlier. A last nail in the coffin is that rx_errors is monitored in production and can indicate a bad NIC/cable/Switch port, but instead some random series of UDP packets with bad checksums will now trigger this alert. This false positive makes the alert useless and affects us as well as other companies. This packet with presumably a bad UDP checksum is *already* passed to the stack, just not marked as offloaded by the hardware/driver. If it is dropped by the stack it will show up as UDP_MIB_CSUMERRORS. And one more thing, none of the other Intel drivers, and at least bnxt_en and mlx5 both don't appear to count UDP offload mismatches as rx_errors. Here is a related customer complaint: https://community.intel.com/t5/Ethernet-Products/ice-rx-errros-is-too-sensitive-to-IP-TCP-attack-packets-Intel/td-p/1662125 Fixes: 4f1fe43c920b ("ice: Add more Rx errors to netdev's rx_error counter") Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Cc: Jake Keller <jacob.e.keller@intel.com> Cc: IWL <intel-wired-lan@lists.osuosl.org> Signed-off-by: Jesse Brandeburg <jbrandeburg@cloudflare.com> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2026-01-28ice: Fix NULL pointer dereference in ice_vsi_set_napi_queuesAaron Ma1-4/+6
Add NULL pointer checks in ice_vsi_set_napi_queues() to prevent crashes during resume from suspend when rings[q_idx]->q_vector is NULL. Tested adaptor: 60:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Controller E810-XXV for SFP [8086:159b] (rev 02) Subsystem: Intel Corporation Ethernet Network Adapter E810-XXV-2 [8086:4003] SR-IOV state: both disabled and enabled can reproduce this issue. kernel version: v6.18 Reproduce steps: Boot up and execute suspend like systemctl suspend or rtcwake. Log: <1>[ 231.443607] BUG: kernel NULL pointer dereference, address: 0000000000000040 <1>[ 231.444052] #PF: supervisor read access in kernel mode <1>[ 231.444484] #PF: error_code(0x0000) - not-present page <6>[ 231.444913] PGD 0 P4D 0 <4>[ 231.445342] Oops: Oops: 0000 [#1] SMP NOPTI <4>[ 231.446635] RIP: 0010:netif_queue_set_napi+0xa/0x170 <4>[ 231.447067] Code: 31 f6 31 ff c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 85 c9 74 0b <48> 83 79 30 00 0f 84 39 01 00 00 55 41 89 d1 49 89 f8 89 f2 48 89 <4>[ 231.447513] RSP: 0018:ffffcc780fc078c0 EFLAGS: 00010202 <4>[ 231.447961] RAX: ffff8b848ca30400 RBX: ffff8b848caf2028 RCX: 0000000000000010 <4>[ 231.448443] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8b848dbd4000 <4>[ 231.448896] RBP: ffffcc780fc078e8 R08: 0000000000000000 R09: 0000000000000000 <4>[ 231.449345] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 <4>[ 231.449817] R13: ffff8b848dbd4000 R14: ffff8b84833390c8 R15: 0000000000000000 <4>[ 231.450265] FS: 00007c7b29e9d740(0000) GS:ffff8b8c068e2000(0000) knlGS:0000000000000000 <4>[ 231.450715] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 231.451179] CR2: 0000000000000040 CR3: 000000030626f004 CR4: 0000000000f72ef0 <4>[ 231.451629] PKRU: 55555554 <4>[ 231.452076] Call Trace: <4>[ 231.452549] <TASK> <4>[ 231.452996] ? ice_vsi_set_napi_queues+0x4d/0x110 [ice] <4>[ 231.453482] ice_resume+0xfd/0x220 [ice] <4>[ 231.453977] ? __pfx_pci_pm_resume+0x10/0x10 <4>[ 231.454425] pci_pm_resume+0x8c/0x140 <4>[ 231.454872] ? __pfx_pci_pm_resume+0x10/0x10 <4>[ 231.455347] dpm_run_callback+0x5f/0x160 <4>[ 231.455796] ? dpm_wait_for_superior+0x107/0x170 <4>[ 231.456244] device_resume+0x177/0x270 <4>[ 231.456708] dpm_resume+0x209/0x2f0 <4>[ 231.457151] dpm_resume_end+0x15/0x30 <4>[ 231.457596] suspend_devices_and_enter+0x1da/0x2b0 <4>[ 231.458054] enter_state+0x10e/0x570 Add defensive checks for both the ring pointer and its q_vector before dereferencing, allowing the system to resume successfully even when q_vectors are unmapped. Fixes: 2a5dc090b92cf ("ice: move netif_queue_set_napi to rtnl-protected sections") Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2026-01-28ixgbe: don't initialize aci lock in ixgbe_recovery_probe()Kohei Enju1-4/+2
hw->aci.lock is already initialized in ixgbe_sw_init(), so ixgbe_recovery_probe() doesn't need to initialize the lock. This function is also not responsible for destroying the lock on failures. Additionally, change the name of label in accordance with this change. Fixes: 29cb3b8d95c7 ("ixgbe: add E610 implementation of FW recovery mode") Reported-by: Simon Horman <horms@kernel.org> Closes: https://lore.kernel.org/intel-wired-lan/aTcFhoH-z2btEKT-@horms.kernel.org/ Signed-off-by: Kohei Enju <enjuk@amazon.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2026-01-28ixgbe: fix memory leaks in the ixgbe_recovery_probe() pathKohei Enju1-12/+8
When ixgbe_recovery_probe() is invoked and this function fails, allocated resources in advance are not completely freed, because ixgbe_probe() returns ixgbe_recovery_probe() directly and ixgbe_recovery_probe() only frees partial resources, resulting in memory leaks including: - adapter->io_addr - adapter->jump_tables[0] - adapter->mac_table - adapter->rss_key - adapter->af_xdp_zc_qps The leaked MMIO region can be observed in /proc/vmallocinfo, and the remaining leaks are reported by kmemleak. Don't return ixgbe_recovery_probe() directly, and instead let ixgbe_probe() to clean up resources on failures. Fixes: 29cb3b8d95c7 ("ixgbe: add E610 implementation of FW recovery mode") Signed-off-by: Kohei Enju <enjuk@amazon.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2026-01-27bonding: fix use-after-free due to enslave fail after slave array updateNikolay Aleksandrov1-5/+5
Fix a use-after-free which happens due to enslave failure after the new slave has been added to the array. Since the new slave can be used for Tx immediately, we can use it after it has been freed by the enslave error cleanup path which frees the allocated slave memory. Slave update array is supposed to be called last when further enslave failures are not expected. Move it after xdp setup to avoid any problems. It is very easy to reproduce the problem with a simple xdp_pass prog: ip l add bond1 type bond mode balance-xor ip l set bond1 up ip l set dev bond1 xdp object xdp_pass.o sec xdp_pass ip l add dumdum type dummy Then run in parallel: while :; do ip l set dumdum master bond1 1>/dev/null 2>&1; done; mausezahn bond1 -a own -b rand -A rand -B 1.1.1.1 -c 0 -t tcp "dp=1-1023, flags=syn" The crash happens almost immediately: [ 605.602850] Oops: general protection fault, probably for non-canonical address 0xe0e6fc2460000137: 0000 [#1] SMP KASAN NOPTI [ 605.602916] KASAN: maybe wild-memory-access in range [0x07380123000009b8-0x07380123000009bf] [ 605.602946] CPU: 0 UID: 0 PID: 2445 Comm: mausezahn Kdump: loaded Tainted: G B 6.19.0-rc6+ #21 PREEMPT(voluntary) [ 605.602979] Tainted: [B]=BAD_PAGE [ 605.602998] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 605.603032] RIP: 0010:netdev_core_pick_tx+0xcd/0x210 [ 605.603063] Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 3e 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 6b 08 49 8d 7d 30 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 25 01 00 00 49 8b 45 30 4c 89 e2 48 89 ee 48 89 [ 605.603111] RSP: 0018:ffff88817b9af348 EFLAGS: 00010213 [ 605.603145] RAX: dffffc0000000000 RBX: ffff88817d28b420 RCX: 0000000000000000 [ 605.603172] RDX: 00e7002460000137 RSI: 0000000000000008 RDI: 07380123000009be [ 605.603199] RBP: ffff88817b541a00 R08: 0000000000000001 R09: fffffbfff3ed8c0c [ 605.603226] R10: ffffffff9f6c6067 R11: 0000000000000001 R12: 0000000000000000 [ 605.603253] R13: 073801230000098e R14: ffff88817d28b448 R15: ffff88817b541a84 [ 605.603286] FS: 00007f6570ef67c0(0000) GS:ffff888221dfa000(0000) knlGS:0000000000000000 [ 605.603319] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 605.603343] CR2: 00007f65712fae40 CR3: 000000011371b000 CR4: 0000000000350ef0 [ 605.603373] Call Trace: [ 605.603392] <TASK> [ 605.603410] __dev_queue_xmit+0x448/0x32a0 [ 605.603434] ? __pfx_vprintk_emit+0x10/0x10 [ 605.603461] ? __pfx_vprintk_emit+0x10/0x10 [ 605.603484] ? __pfx___dev_queue_xmit+0x10/0x10 [ 605.603507] ? bond_start_xmit+0xbfb/0xc20 [bonding] [ 605.603546] ? _printk+0xcb/0x100 [ 605.603566] ? __pfx__printk+0x10/0x10 [ 605.603589] ? bond_start_xmit+0xbfb/0xc20 [bonding] [ 605.603627] ? add_taint+0x5e/0x70 [ 605.603648] ? add_taint+0x2a/0x70 [ 605.603670] ? end_report.cold+0x51/0x75 [ 605.603693] ? bond_start_xmit+0xbfb/0xc20 [bonding] [ 605.603731] bond_start_xmit+0x623/0xc20 [bonding] Fixes: 9e2ee5c7e7c3 ("net, bonding: Add XDP support to the bonding driver") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Reported-by: Chen Zhen <chenzhen126@huawei.com> Closes: https://lore.kernel.org/netdev/fae17c21-4940-5605-85b2-1d5e17342358@huawei.com/ CC: Jussi Maki <joamaki@gmail.com> CC: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://patch.msgid.link/20260123120659.571187-1-razor@blackwall.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-01-27net: spacemit: Check for netif_carrier_ok() in emac_stats_update()Vivian Wang1-7/+27
Some PHYs stop the refclk for power saving, usually while link down. This causes reading stats to time out. Therefore, in emac_stats_update(), also don't update and reschedule if !netif_carrier_ok(). But that means we could be missing later updates if the link comes back up, so also reschedule when link up is detected in emac_adjust_link(). While we're at it, improve the comments and error message prints around this to reflect the better understanding of how this could happen. Hopefully if this happens again on new hardware, these comments will direct towards a solution. Closes: https://lore.kernel.org/r/20260119141620.1318102-1-amadeus@jmu.edu.cn/ Fixes: bfec6d7f2001 ("net: spacemit: Add K1 Ethernet MAC") Co-developed-by: Chukun Pan <amadeus@jmu.edu.cn> Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn> Link: https://patch.msgid.link/20260123-k1-ethernet-clarify-stat-timeout-v3-1-93b9df627e87@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-27rocker: fix memory leak in rocker_world_port_post_fini()Kery Qi1-3/+2
In rocker_world_port_pre_init(), rocker_port->wpriv is allocated with kzalloc(wops->port_priv_size, GFP_KERNEL). However, in rocker_world_port_post_fini(), the memory is only freed when wops->port_post_fini callback is set: if (!wops->port_post_fini) return; wops->port_post_fini(rocker_port); kfree(rocker_port->wpriv); Since rocker_ofdpa_ops does not implement port_post_fini callback (it is NULL), the wpriv memory allocated for each port is never freed when ports are removed. This leads to a memory leak of sizeof(struct ofdpa_port) bytes per port on every device removal. Fix this by always calling kfree(rocker_port->wpriv) regardless of whether the port_post_fini callback exists. Fixes: e420114eef4a ("rocker: introduce worlds infrastructure") Signed-off-by: Kery Qi <qikeyu2017@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260123211030.2109-2-qikeyu2017@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-26net: dsa: yt921x: Fix MIB overflow wraparound routineDavid Yang1-7/+8
Reported by the following Smatch static checker warning: drivers/net/dsa/yt921x.c:702 yt921x_read_mib() warn: was expecting a 64 bit value instead of '(~0)' Fixes: 186623f4aa72 ("net: dsa: yt921x: Add support for Motorcomm YT921x") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/netdev/aPsjYKQMzpY0nSXm@stanley.mountain/ Suggested-by: David Laight <david.laight.linux@gmail.com> Signed-off-by: David Yang <mmyangfl@gmail.com> Link: https://patch.msgid.link/20260122170512.2713738-1-mmyangfl@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-26net/mlx5: Fix return type mismatch in mlx5_esw_vport_vhca_id()Zeng Chi1-1/+1
The function mlx5_esw_vport_vhca_id() is declared to return bool, but returns -EOPNOTSUPP (-45), which is an int error code. This causes a signedness bug as reported by smatch. This patch fixes this smatch report: drivers/net/ethernet/mellanox/mlx5/core/eswitch.h:981 mlx5_esw_vport_vhca_id() warn: signedness bug returning '(-45)' Fixes: 1baf30426553 ("net/mlx5: E-Switch, Set/Query hca cap via vhca id") Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Zeng Chi <zengchi@kylinos.cn> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20260123085749.1401969-1-zeng_chi911@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-26net: wwan: t7xx: fix potential skb->frags overflow in RX pathKery Qi1-2/+7
When receiving data in the DPMAIF RX path, the t7xx_dpmaif_set_frag_to_skb() function adds page fragments to an skb without checking if the number of fragments has exceeded MAX_SKB_FRAGS. This could lead to a buffer overflow in skb_shinfo(skb)->frags[] array, corrupting adjacent memory and potentially causing kernel crashes or other undefined behavior. This issue was identified through static code analysis by comparing with a similar vulnerability fixed in the mt76 driver commit b102f0c522cf ("mt76: fix array overflow on receiving too many fragments for a packet"). The vulnerability could be triggered if the modem firmware sends packets with excessive fragments. While under normal protocol conditions (MTU 3080 bytes, BAT buffer 3584 bytes), a single packet should not require additional fragments, the kernel should not blindly trust firmware behavior. Malicious, buggy, or compromised firmware could potentially craft packets with more fragments than the kernel expects. Fix this by adding a bounds check before calling skb_add_rx_frag() to ensure nr_frags does not exceed MAX_SKB_FRAGS. The check must be performed before unmapping to avoid a page leak and double DMA unmap during device teardown. Fixes: d642b012df70a ("net: wwan: t7xx: Add data path interface") Signed-off-by: Kery Qi <qikeyu2017@gmail.com> Link: https://patch.msgid.link/20260122170401.1986-2-qikeyu2017@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-02-19 13:36:20 +0300