summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2022-01-27lib82596: Fix IRQ check in sni_82596_probeMiaoqian Lin1-1/+2
commit 99218cbf81bf21355a3de61cd46a706d36e900e6 upstream. platform_get_irq() returns negative error number instead 0 on failure. And the doc of platform_get_irq() provides a usage example: int irq = platform_get_irq(pdev, 0); if (irq < 0) return irq; Fix the check of return value to catch errors correctly. Fixes: 115978859272 ("i825xx: Move the Intel 82586/82593/82596 based drivers") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27bcmgenet: add WOL IRQ checkSergey Shtylyov1-4/+6
commit 9deb48b53e7f4056c2eaa2dc2ee3338df619e4f6 upstream. The driver neglects to check the result of platform_get_irq_optional()'s call and blithely passes the negative error codes to devm_request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL. Stop calling devm_request_irq() with the invalid IRQ #s. Fixes: 8562056f267d ("net: bcmgenet: request Wake-on-LAN interrupt") Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27net: axienet: fix number of TX ring slots for available checkRobert Hancock1-2/+2
commit aba57a823d2985a2cc8c74a2535f3a88e68d9424 upstream. The check for the number of available TX ring slots was off by 1 since a slot is required for the skb header as well as each fragment. This could result in overwriting a TX ring slot that was still in use. Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27net: axienet: Wait for PhyRstCmplt after core resetRobert Hancock1-0/+10
commit b400c2f4f4c53c86594dd57098970d97d488bfde upstream. When resetting the device, wait for the PhyRstCmplt bit to be set in the interrupt status register before continuing initialization, to ensure that the core is actually ready. When using an external PHY, this also ensures we do not start trying to access the PHY while it is still in reset. The PHY reset is initiated by the core reset which is triggered just above, but remains asserted for 5ms after the core is reset according to the documentation. The MgtRdy bit could also be waited for, but unfortunately when using 7-series devices, the bit does not appear to work as documented (it seems to behave as some sort of link state indication and not just an indication the transceiver is ready) so it can't really be relied on for this purpose. Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27net/fsl: xgmac_mdio: Fix incorrect iounmap when removing moduleTobias Waldekranz1-1/+2
commit 3f7c239c7844d2044ed399399d97a5f1c6008e1b upstream. As reported by sparse: In the remove path, the driver would attempt to unmap its own priv pointer - instead of the io memory that it mapped in probe. Fixes: 9f35a7342cff ("net/fsl: introduce Freescale 10G MDIO driver") Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27net: mdio: Demote probed message to debug printFlorian Fainelli1-1/+1
[ Upstream commit 7590fc6f80ac2cbf23e6b42b668bbeded070850b ] On systems with large numbers of MDIO bus/muxes the message indicating that a given MDIO bus has been successfully probed is repeated for as many buses we have, which can eat up substantial boot time for no reason, demote to a debug print. Reported-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220103194024.2620-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27ath9k: Fix out-of-bound memcpy in ath9k_hif_usb_rx_streamZekun Shen1-0/+7
[ Upstream commit 6ce708f54cc8d73beca213cec66ede5ce100a781 ] Large pkt_len can lead to out-out-bound memcpy. Current ath9k_hif_usb_rx_stream allows combining the content of two urb inputs to one pkt. The first input can indicate the size of the pkt. Any remaining size is saved in hif_dev->rx_remain_len. While processing the next input, memcpy is used with rx_remain_len. 4-byte pkt_len can go up to 0xffff, while a single input is 0x4000 maximum in size (MAX_RX_BUF_SIZE). Thus, the patch adds a check for pkt_len which must not exceed 2 * MAX_RX_BUG_SIZE. BUG: KASAN: slab-out-of-bounds in ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] Read of size 46393 at addr ffff888018798000 by task kworker/0:1/23 CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 5.6.0 #63 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014 Workqueue: events request_firmware_work_func Call Trace: <IRQ> dump_stack+0x76/0xa0 print_address_description.constprop.0+0x16/0x200 ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] __kasan_report.cold+0x37/0x7c ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] kasan_report+0xe/0x20 check_memory_region+0x15a/0x1d0 memcpy+0x20/0x50 ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] ? hif_usb_mgmt_cb+0x2d9/0x2d9 [ath9k_htc] ? _raw_spin_lock_irqsave+0x7b/0xd0 ? _raw_spin_trylock_bh+0x120/0x120 ? __usb_unanchor_urb+0x12f/0x210 __usb_hcd_giveback_urb+0x1e4/0x380 usb_giveback_urb_bh+0x241/0x4f0 ? __hrtimer_run_queues+0x316/0x740 ? __usb_hcd_giveback_urb+0x380/0x380 tasklet_action_common.isra.0+0x135/0x330 __do_softirq+0x18c/0x634 irq_exit+0x114/0x140 smp_apic_timer_interrupt+0xde/0x380 apic_timer_interrupt+0xf/0x20 I found the bug using a custome USBFuzz port. It's a research work to fuzz USB stack/drivers. I modified it to fuzz ath9k driver only, providing hand-crafted usb descriptors to QEMU. After fixing the value of pkt_tag to ATH_USB_RX_STREAM_MODE_TAG in QEMU emulation, I found the KASAN report. The bug is triggerable whenever pkt_len is above two MAX_RX_BUG_SIZE. I used the same input that crashes to test the driver works when applying the patch. Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/YXsidrRuK6zBJicZ@10-18-43-117.dynapool.wireless.nyu.edu Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27net: bonding: debug: avoid printing debug logs when bond is not notifying peersSuresh Kumar1-3/+3
[ Upstream commit fee32de284ac277ba434a2d59f8ce46528ff3946 ] Currently "bond_should_notify_peers: slave ..." messages are printed whenever "bond_should_notify_peers" function is called. +++ Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): Received LACPDU on port 1 Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): Rx Machine: Port=1, Last State=6, Curr State=6 Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): partner sync=1 Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 ... Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): Received LACPDU on port 2 Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): Rx Machine: Port=2, Last State=6, Curr State=6 Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): partner sync=1 Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 +++ This is confusing and can also clutter up debug logs. Print logs only when the peer notification happens. Signed-off-by: Suresh Kumar <suresh2514@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27iwlwifi: mvm: synchronize with FW after multicast commandsJohannes Berg1-0/+17
[ Upstream commit db66abeea3aefed481391ecc564fb7b7fb31d742 ] If userspace installs a lot of multicast groups very quickly, then we may run out of command queue space as we send the updates in an asynchronous fashion (due to locking concerns), and the CPU can create them faster than the firmware can process them. This is true even when mac80211 has a work struct that gets scheduled. Fix this by synchronizing with the firmware after sending all those commands - outside of the iteration we can send a synchronous echo command that just has the effect of the CPU waiting for the prior asynchronous commands to finish. This also will cause fewer of the commands to be sent to the firmware overall, because the work will only run once when rescheduled multiple times while it's running. Link: https://bugzilla.kernel.org/show_bug.cgi?id=213649 Suggested-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reported-by: Maximilian Ernestus <maximilian@ernestus.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204083238.51aea5b79ea4.I88a44798efda16e9fe480fb3e94224931d311b29@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27mwifiex: Fix skb_over_panic in mwifiex_usb_recv()Zekun Shen1-1/+2
[ Upstream commit 04d80663f67ccef893061b49ec8a42ff7045ae84 ] Currently, with an unknown recv_type, mwifiex_usb_recv just return -1 without restoring the skb. Next time mwifiex_usb_rx_complete is invoked with the same skb, calling skb_put causes skb_over_panic. The bug is triggerable with a compromised/malfunctioning usb device. After applying the patch, skb_over_panic no longer shows up with the same input. Attached is the panic report from fuzzing. skbuff: skb_over_panic: text:000000003bf1b5fa len:2048 put:4 head:00000000dd6a115b data:000000000a9445d8 tail:0x844 end:0x840 dev:<NULL> kernel BUG at net/core/skbuff.c:109! invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 0 PID: 198 Comm: in:imklog Not tainted 5.6.0 #60 RIP: 0010:skb_panic+0x15f/0x161 Call Trace: <IRQ> ? mwifiex_usb_rx_complete+0x26b/0xfcd [mwifiex_usb] skb_put.cold+0x24/0x24 mwifiex_usb_rx_complete+0x26b/0xfcd [mwifiex_usb] __usb_hcd_giveback_urb+0x1e4/0x380 usb_giveback_urb_bh+0x241/0x4f0 ? __hrtimer_run_queues+0x316/0x740 ? __usb_hcd_giveback_urb+0x380/0x380 tasklet_action_common.isra.0+0x135/0x330 __do_softirq+0x18c/0x634 irq_exit+0x114/0x140 smp_apic_timer_interrupt+0xde/0x380 apic_timer_interrupt+0xf/0x20 </IRQ> Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu> Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/YX4CqjfRcTa6bVL+@Zekuns-MBP-16.fios-router.home Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27ar5523: Fix null-ptr-deref with unexpected WDCMSG_TARGET_START replyZekun Shen1-0/+4
[ Upstream commit ae80b6033834342601e99f74f6a62ff5092b1cee ] Unexpected WDCMSG_TARGET_START replay can lead to null-ptr-deref when ar->tx_cmd->odata is NULL. The patch adds a null check to prevent such case. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] ar5523_cmd+0x46a/0x581 [ar5523] ar5523_probe.cold+0x1b7/0x18da [ar5523] ? ar5523_cmd_rx_cb+0x7a0/0x7a0 [ar5523] ? __pm_runtime_set_status+0x54a/0x8f0 ? _raw_spin_trylock_bh+0x120/0x120 ? pm_runtime_barrier+0x220/0x220 ? __pm_runtime_resume+0xb1/0xf0 usb_probe_interface+0x25b/0x710 really_probe+0x209/0x5d0 driver_probe_device+0xc6/0x1b0 device_driver_attach+0xe2/0x120 I found the bug using a custome USBFuzz port. It's a research work to fuzz USB stack/drivers. I modified it to fuzz ath9k driver only, providing hand-crafted usb descriptors to QEMU. After fixing the code (fourth byte in usb packet) to WDCMSG_TARGET_START, I got the null-ptr-deref bug. I believe the bug is triggerable whenever cmd->odata is NULL. After patching, I tested with the same input and no longer see the KASAN report. This was NOT tested on a real device. Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/YXsmPQ3awHFLuAj2@10-18-43-117.dynapool.wireless.nyu.edu Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27net: mcs7830: handle usb read errors properlyPavel Skripkin1-2/+10
[ Upstream commit d668769eb9c52b150753f1653f7f5a0aeb8239d2 ] Syzbot reported uninit value in mcs7830_bind(). The problem was in missing validation check for bytes read via usbnet_read_cmd(). usbnet_read_cmd() internally calls usb_control_msg(), that returns number of bytes read. Code should validate that requested number of bytes was actually read. So, this patch adds missing size validation check inside mcs7830_get_reg() to prevent uninit value bugs Reported-and-tested-by: syzbot+003c0a286b9af5412510@syzkaller.appspotmail.com Fixes: 2a36d7083438 ("USB: driver for mcs7830 (aka DeLOCK) USB ethernet adapter") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20220106225716.7425-1-paskripkin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27can: xilinx_can: xcan_probe(): check for error irqJiasheng Jiang1-1/+6
[ Upstream commit c6564c13dae25cd7f8e1de5127b4da4500ee5844 ] For the possible failure of the platform_get_irq(), the returned irq could be error number and will finally cause the failure of the request_irq(). Consider that platform_get_irq() can now in certain cases return -EPROBE_DEFER, and the consequences of letting request_irq() effectively convert that into -EINVAL, even at probe time rather than later on. So it might be better to check just now. Fixes: b1201e44f50b ("can: xilinx CAN controller support") Link: https://lore.kernel.org/all/20211224021324.1447494-1-jiasheng@iscas.ac.cn Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27can: softing: softing_startstop(): fix set but not used variable warningMarc Kleine-Budde1-5/+6
[ Upstream commit 370d988cc529598ebaec6487d4f84c2115dc696b ] In the function softing_startstop() the variable error_reporting is assigned but not used. The code that uses this variable is commented out. Its stated that the functionality is not finally verified. To fix the warning: | drivers/net/can/softing/softing_fw.c:424:9: error: variable 'error_reporting' set but not used [-Werror,-Wunused-but-set-variable] remove the comment, activate the code, but add a "0 &&" to the if expression and rely on the optimizer rather than the preprocessor to remove the code. Link: https://lore.kernel.org/all/20220109103126.1872833-1-mkl@pengutronix.de Fixes: 03fd3cf5a179 ("can: add driver for Softing card") Cc: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27ppp: ensure minimum packet size in ppp_write()Eric Dumazet1-1/+6
[ Upstream commit 44073187990d5629804ce0627525f6ea5cfef171 ] It seems pretty clear ppp layer assumed user space would always be kind to provide enough data in their write() to a ppp device. This patch makes sure user provides at least 2 bytes. It adds PPP_PROTO_LEN macro that could replace in net-next many occurrences of hard-coded 2 value. I replaced only one occurrence to ease backports to stable kernels. The bug manifests in the following report: BUG: KMSAN: uninit-value in ppp_send_frame+0x28d/0x27c0 drivers/net/ppp/ppp_generic.c:1740 ppp_send_frame+0x28d/0x27c0 drivers/net/ppp/ppp_generic.c:1740 __ppp_xmit_process+0x23e/0x4b0 drivers/net/ppp/ppp_generic.c:1640 ppp_xmit_process+0x1fe/0x480 drivers/net/ppp/ppp_generic.c:1661 ppp_write+0x5cb/0x5e0 drivers/net/ppp/ppp_generic.c:513 do_iter_write+0xb0c/0x1500 fs/read_write.c:853 vfs_writev fs/read_write.c:924 [inline] do_writev+0x645/0xe00 fs/read_write.c:967 __do_sys_writev fs/read_write.c:1040 [inline] __se_sys_writev fs/read_write.c:1037 [inline] __x64_sys_writev+0xe5/0x120 fs/read_write.c:1037 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_post_alloc_hook mm/slab.h:524 [inline] slab_alloc_node mm/slub.c:3251 [inline] __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974 kmalloc_reserve net/core/skbuff.c:354 [inline] __alloc_skb+0x545/0xf90 net/core/skbuff.c:426 alloc_skb include/linux/skbuff.h:1126 [inline] ppp_write+0x11d/0x5e0 drivers/net/ppp/ppp_generic.c:501 do_iter_write+0xb0c/0x1500 fs/read_write.c:853 vfs_writev fs/read_write.c:924 [inline] do_writev+0x645/0xe00 fs/read_write.c:967 __do_sys_writev fs/read_write.c:1040 [inline] __se_sys_writev fs/read_write.c:1037 [inline] __x64_sys_writev+0xe5/0x120 fs/read_write.c:1037 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paul Mackerras <paulus@samba.org> Cc: linux-ppp@vger.kernel.org Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27can: softing_cs: softingcs_probe(): fix memleak on registration failureJohan Hovold1-1/+1
commit ced4913efb0acc844ed65cc01d091a85d83a2082 upstream. In case device registration fails during probe, the driver state and the embedded platform device structure needs to be freed using platform_device_put() to properly free all resources (e.g. the device name). Fixes: 0a0b7a5f7a04 ("can: add driver for Softing card") Link: https://lore.kernel.org/all/20211222104843.6105-1-johan@kernel.org Cc: stable@vger.kernel.org # 2.6.38 Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27rtlwifi: rtl8192cu: Fix WARNING when calling local_irq_restore() with ↵Larry Finger1-0/+1
interrupts enabled commit 8b144dedb928e4e2f433a328d58f44c3c098d63e upstream. Syzbot reports the following WARNING: [200~raw_local_irq_restore() called with IRQs enabled WARNING: CPU: 1 PID: 1206 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x1d/0x20 kernel/locking/irqflag-debug.c:10 Hardware initialization for the rtl8188cu can run for as long as 350 ms, and the routine may be called with interrupts disabled. To avoid locking the machine for this long, the current routine saves the interrupt flags and enables local interrupts. The problem is that it restores the flags at the end without disabling local interrupts first. This patch fixes commit a53268be0cb9 ("rtlwifi: rtl8192cu: Fix too long disable of IRQs"). Reported-by: syzbot+cce1ee31614c171f5595@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Fixes: a53268be0cb9 ("rtlwifi: rtl8192cu: Fix too long disable of IRQs") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211215171105.20623-1-Larry.Finger@lwfinger.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27can: gs_usb: gs_can_start_xmit(): zero-initialize hf->{flags,reserved}Brian Silverman1-0/+2
commit 89d58aebe14a365c25ba6645414afdbf4e41cea4 upstream. No information is deliberately sent in hf->flags in host -> device communications, but the open-source candleLight firmware echoes it back, which can result in the GS_CAN_FLAG_OVERFLOW flag being set and generating spurious ERRORFRAMEs. While there also initialize the reserved member with 0. Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/20220106002952.25883-1-brian.silverman@bluerivertech.com Link: https://github.com/candle-usb/candleLight_fw/issues/87 Cc: stable@vger.kernel.org Signed-off-by: Brian Silverman <brian.silverman@bluerivertech.com> [mkl: initialize the reserved member, too] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27can: gs_usb: fix use of uninitialized variable, detach device on reception ↵Marc Kleine-Budde1-1/+2
of invalid USB data commit 4a8737ff068724f509d583fef404d349adba80d6 upstream. The received data contains the channel the received data is associated with. If the channel number is bigger than the actual number of channels assume broken or malicious USB device and shut it down. This fixes the error found by clang: | drivers/net/can/usb/gs_usb.c:386:6: error: variable 'dev' is used | uninitialized whenever 'if' condition is true | if (hf->channel >= GS_MAX_INTF) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ | drivers/net/can/usb/gs_usb.c:474:10: note: uninitialized use occurs here | hf, dev->gs_hf_size, gs_usb_receive_bulk_callback, | ^~~ Link: https://lore.kernel.org/all/20211210091158.408326-1-mkl@pengutronix.de Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-11rndis_host: support Hytera digital radiosThomas Toye1-0/+5
commit 29262e1f773b4b6a43711120be564c57fca07cfb upstream. Hytera makes a range of digital (DMR) radios. These radios can be programmed to a allow a computer to control them over Ethernet over USB, either using NCM or RNDIS. This commit adds support for RNDIS for Hytera radios. I tested with a Hytera PD785 and a Hytera MD785G. When these radios are programmed to set up a Radio to PC Network using RNDIS, an USB interface will be added with class 2 (Communications), subclass 2 (Abstract Modem Control) and an interface protocol of 255 ("vendor specific" - lsusb even hints "MSFT RNDIS?"). This patch is similar to the solution of this StackOverflow user, but that only works for the Hytera MD785: https://stackoverflow.com/a/53550858 To use the "Radio to PC Network" functionality of Hytera DMR radios, the radios need to be programmed correctly in CPS (Hytera's Customer Programming Software). "Forward to PC" should be checked in "Network" (under "General Setting" in "Conventional") and the "USB Network Communication Protocol" should be set to RNDIS. Signed-off-by: Thomas Toye <thomas@toye.io> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-11i40e: Fix incorrect netdev's real number of RX/TX queuesJedrzej Jagielski1-7/+25
commit e738451d78b2f8a9635d66c6a87f304b4d965f7a upstream. There was a wrong queues representation in sysfs during driver's reinitialization in case of online cpus number is less than combined queues. It was caused by stopped NetworkManager, which is responsible for calling vsi_open function during driver's initialization. In specific situation (ex. 12 cpus online) there were 16 queues in /sys/class/net/<iface>/queues. In case of modifying queues with value higher, than number of online cpus, then it caused write errors and other errors. Add updating of sysfs's queues representation during driver initialization. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Lukasz Cieplicki <lukaszx.cieplicki@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-11ieee802154: atusb: fix uninit value in atusb_set_extended_addrPavel Skripkin1-4/+6
commit 754e4382354f7908923a1949d8dc8d05f82f09cb upstream. Alexander reported a use of uninitialized value in atusb_set_extended_addr(), that is caused by reading 0 bytes via usb_control_msg(). Fix it by validating if the number of bytes transferred is actually correct, since usb_control_msg() may read less bytes, than was requested by caller. Fail log: BUG: KASAN: uninit-cmp in ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline] BUG: KASAN: uninit-cmp in atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline] BUG: KASAN: uninit-cmp in atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056 Uninit value used in comparison: 311daa649a2003bd stack handle: 000000009a2003bd ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline] atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline] atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056 usb_probe_interface+0x314/0x7f0 drivers/usb/core/driver.c:396 Fixes: 7490b008d123 ("ieee802154: add support for atusb transceiver") Reported-by: Alexander Potapenko <glider@google.com> Acked-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Link: https://lore.kernel.org/r/20220104182806.7188-1-paskripkin@gmail.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-29hamradio: improve the incomplete fix to avoid NPDLin Ma1-2/+2
commit b2f37aead1b82a770c48b5d583f35ec22aabb61e upstream. The previous commit 3e0588c291d6 ("hamradio: defer ax25 kfree after unregister_netdev") reorder the kfree operations and unregister_netdev operation to prevent UAF. This commit improves the previous one by also deferring the nullify of the ax->tty pointer. Otherwise, a NULL pointer dereference bug occurs. Partial of the stack trace is shown below. BUG: kernel NULL pointer dereference, address: 0000000000000538 RIP: 0010:ax_xmit+0x1f9/0x400 ... Call Trace: dev_hard_start_xmit+0xec/0x320 sch_direct_xmit+0xea/0x240 __qdisc_run+0x166/0x5c0 __dev_queue_xmit+0x2c7/0xaf0 ax25_std_establish_data_link+0x59/0x60 ax25_connect+0x3a0/0x500 ? security_socket_connect+0x2b/0x40 __sys_connect+0x96/0xc0 ? __hrtimer_init+0xc0/0xc0 ? common_nsleep+0x2e/0x50 ? switch_fpu_return+0x139/0x1a0 __x64_sys_connect+0x11/0x20 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The crash point is shown as below static void ax_encaps(...) { ... set_bit(TTY_DO_WRITE_WAKEUP, &ax->tty->flags); // ax->tty = NULL! ... } By placing the nullify action after the unregister_netdev, the ax->tty pointer won't be assigned as NULL net_device framework layer is well synchronized. Signed-off-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-29hamradio: defer ax25 kfree after unregister_netdevLin Ma1-4/+5
commit 3e0588c291d6ce225f2b891753ca41d45ba42469 upstream. There is a possible race condition (use-after-free) like below (USE) | (FREE) ax25_sendmsg | ax25_queue_xmit | dev_queue_xmit | __dev_queue_xmit | __dev_xmit_skb | sch_direct_xmit | ... xmit_one | netdev_start_xmit | tty_ldisc_kill __netdev_start_xmit | mkiss_close ax_xmit | kfree ax_encaps | | Even though there are two synchronization primitives before the kfree: 1. wait_for_completion(&ax->dead). This can prevent the race with routines from mkiss_ioctl. However, it cannot stop the routine coming from upper layer, i.e., the ax25_sendmsg. 2. netif_stop_queue(ax->dev). It seems that this line of code aims to halt the transmit queue but it fails to stop the routine that already being xmit. This patch reorder the kfree after the unregister_netdev to avoid the possible UAF as the unregister_netdev() is well synchronized and won't return if there is a running routine. Signed-off-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-29drivers: net: smc911x: Check for error irqJiasheng Jiang1-0/+5
[ Upstream commit cb93b3e11d405f20a405a07482d01147ef4934a3 ] Because platform_get_irq() could fail and return error irq. Therefore, it might be better to check it if order to avoid the use of error irq. Fixes: ae150435b59e ("smsc: Move the SMC (SMSC) drivers") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-29bonding: fix ad_actor_system option setting to defaultFernando Fernandez Mancera1-1/+1
[ Upstream commit 1c15b05baea71a5ff98235783e3e4ad227760876 ] When 802.3ad bond mode is configured the ad_actor_system option is set to "00:00:00:00:00:00". But when trying to set the all-zeroes MAC as actors' system address it was failing with EINVAL. An all-zeroes ethernet address is valid, only multicast addresses are not valid values. Fixes: 171a42c38c6e ("bonding: add netlink support for sys prio, actor sys mac, and port key") Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20211221111345.2462-1-ffmancera@riseup.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-29qlcnic: potential dereference null pointer of rx_queue->page_ringJiasheng Jiang3-5/+13
[ Upstream commit 60ec7fcfe76892a1479afab51ff17a4281923156 ] The return value of kcalloc() needs to be checked. To avoid dereference of null pointer in case of the failure of alloc. Therefore, it might be better to change the return type of qlcnic_sriov_alloc_vlans() and return -ENOMEM when alloc fails and return 0 the others. Also, qlcnic_sriov_set_guest_vlan_mode() and __qlcnic_pci_sriov_enable() should deal with the return value of qlcnic_sriov_alloc_vlans(). Fixes: 154d0c810c53 ("qlcnic: VLAN enhancement for 84XX adapters") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-29can: kvaser_usb: get CAN clock frequency from deviceJimmy Assarsson1-5/+36
commit fb12797ab1fef480ad8a32a30984844444eeb00d upstream. The CAN clock frequency is used when calculating the CAN bittiming parameters. When wrong clock frequency is used, the device may end up with wrong bittiming parameters, depending on user requested bittiming parameters. To avoid this, get the CAN clock frequency from the device. Various existing Kvaser Leaf products use different CAN clocks. Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Link: https://lore.kernel.org/all/20211208152122.250852-2-extja@kvaser.com Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-29net: usb: lan78xx: add Allied Telesis AT29M2-AFGreg Jesionowski1-0/+6
commit ef8a0f6eab1ca5d1a75c242c5c7b9d386735fa0a upstream. This adds the vendor and product IDs for the AT29M2-AF which is a lan7801-based device. Signed-off-by: Greg Jesionowski <jesionowskigreg@gmail.com> Link: https://lore.kernel.org/r/20211214221027.305784-1-jesionowskigreg@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22xen/netback: don't queue unlimited number of packagesJuergen Gross1-4/+9
commit be81992f9086b230623ae3ebbc85ecee4d00a3d3 upstream. In case a guest isn't consuming incoming network traffic as fast as it is coming in, xen-netback is buffering network packages in unlimited numbers today. This can result in host OOM situations. Commit f48da8b14d04ca8 ("xen-netback: fix unlimited guest Rx internal queue and carrier flapping") meant to introduce a mechanism to limit the amount of buffered data by stopping the Tx queue when reaching the data limit, but this doesn't work for cases like UDP. When hitting the limit don't queue further SKBs, but drop them instead. In order to be able to tell Rx packages have been dropped increment the rx_dropped statistics counter in this case. It should be noted that the old solution to continue queueing SKBs had the additional problem of an overflow of the 32-bit rx_queue_len value would result in intermittent Tx queue enabling. This is part of XSA-392 Fixes: f48da8b14d04ca8 ("xen-netback: fix unlimited guest Rx internal queue and carrier flapping") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22xen/netfront: harden netfront against event channel stormsJuergen Gross1-31/+94
commit b27d47950e481f292c0a5ad57357edb9d95d03ba upstream. The Xen netfront driver is still vulnerable for an attack via excessive number of events sent by the backend. Fix that by using lateeoi event channels. For being able to detect the case of no rx responses being added while the carrier is down a new lock is needed in order to update and test rsp_cons and the number of seen unconsumed responses atomically. This is part of XSA-391 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22net: lan78xx: Avoid unnecessary self assignmentNathan Chancellor1-4/+2
commit 94e7c844990f0db92418586b107be135b4963b66 upstream. Clang warns when a variable is assigned to itself. drivers/net/usb/lan78xx.c:940:11: warning: explicitly assigning value of variable of type 'u32' (aka 'unsigned int') to itself [-Wself-assign] offset = offset; ~~~~~~ ^ ~~~~~~ 1 warning generated. Reorder the if statement to acheive the same result and avoid a self assignment warning. Link: https://github.com/ClangBuiltLinux/linux/issues/129 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22net: systemport: Add global locking for descriptor lifecycleFlorian Fainelli2-0/+6
commit 8b8e6e782456f1ce02a7ae914bbd5b1053f0b034 upstream. The descriptor list is a shared resource across all of the transmit queues, and the locking mechanism used today only protects concurrency across a given transmit queue between the transmit and reclaiming. This creates an opportunity for the SYSTEMPORT hardware to work on corrupted descriptors if we have multiple producers at once which is the case when using multiple transmit queues. This was particularly noticeable when using multiple flows/transmit queues and it showed up in interesting ways in that UDP packets would get a correct UDP header checksum being calculated over an incorrect packet length. Similarly TCP packets would get an equally correct checksum computed by the hardware over an incorrect packet length. The SYSTEMPORT hardware maintains an internal descriptor list that it re-arranges when the driver produces a new descriptor anytime it writes to the WRITE_PORT_{HI,LO} registers, there is however some delay in the hardware to re-organize its descriptors and it is possible that concurrent TX queues eventually break this internal allocation scheme to the point where the length/status part of the descriptor gets used for an incorrect data buffer. The fix is to impose a global serialization for all TX queues in the short section where we are writing to the WRITE_PORT_{HI,LO} registers which solves the corruption even with multiple concurrent TX queues being used. Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211215202450.4086240-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22igbvf: fix double free in `igbvf_probe`Letu Ren1-0/+1
[ Upstream commit b6d335a60dc624c0d279333b22c737faa765b028 ] In `igbvf_probe`, if register_netdev() fails, the program will go to label err_hw_init, and then to label err_ioremap. In free_netdev() which is just below label err_ioremap, there is `list_for_each_entry_safe` and `netif_napi_del` which aims to delete all entries in `dev->napi_list`. The program has added an entry `adapter->rx_ring->napi` which is added by `netif_napi_add` in igbvf_alloc_queues(). However, adapter->rx_ring has been freed below label err_hw_init. So this a UAF. In terms of how to patch the problem, we can refer to igbvf_remove() and delete the entry before `adapter->rx_ring`. The KASAN logs are as follows: [ 35.126075] BUG: KASAN: use-after-free in free_netdev+0x1fd/0x450 [ 35.127170] Read of size 8 at addr ffff88810126d990 by task modprobe/366 [ 35.128360] [ 35.128643] CPU: 1 PID: 366 Comm: modprobe Not tainted 5.15.0-rc2+ #14 [ 35.129789] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 35.131749] Call Trace: [ 35.132199] dump_stack_lvl+0x59/0x7b [ 35.132865] print_address_description+0x7c/0x3b0 [ 35.133707] ? free_netdev+0x1fd/0x450 [ 35.134378] __kasan_report+0x160/0x1c0 [ 35.135063] ? free_netdev+0x1fd/0x450 [ 35.135738] kasan_report+0x4b/0x70 [ 35.136367] free_netdev+0x1fd/0x450 [ 35.137006] igbvf_probe+0x121d/0x1a10 [igbvf] [ 35.137808] ? igbvf_vlan_rx_add_vid+0x100/0x100 [igbvf] [ 35.138751] local_pci_probe+0x13c/0x1f0 [ 35.139461] pci_device_probe+0x37e/0x6c0 [ 35.165526] [ 35.165806] Allocated by task 366: [ 35.166414] ____kasan_kmalloc+0xc4/0xf0 [ 35.167117] foo_kmem_cache_alloc_trace+0x3c/0x50 [igbvf] [ 35.168078] igbvf_probe+0x9c5/0x1a10 [igbvf] [ 35.168866] local_pci_probe+0x13c/0x1f0 [ 35.169565] pci_device_probe+0x37e/0x6c0 [ 35.179713] [ 35.179993] Freed by task 366: [ 35.180539] kasan_set_track+0x4c/0x80 [ 35.181211] kasan_set_free_info+0x1f/0x40 [ 35.181942] ____kasan_slab_free+0x103/0x140 [ 35.182703] kfree+0xe3/0x250 [ 35.183239] igbvf_probe+0x1173/0x1a10 [igbvf] [ 35.184040] local_pci_probe+0x13c/0x1f0 Fixes: d4e0fe01a38a0 (igbvf: add new driver to support 82576 virtual functions) Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Letu Ren <fantasquex@gmail.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-14net/qla3xxx: fix an error code in ql_adapter_up()Dan Carpenter1-10/+9
commit d17b9737c2bc09b4ac6caf469826e5a7ce3ffab7 upstream. The ql_wait_for_drvr_lock() fails and returns false, then this function should return an error code instead of returning success. The other problem is that the success path prints an error message netdev_err(ndev, "Releasing driver lock\n"); Delete that and re-order the code a little to make it more clear. Fixes: 5a4faa873782 ("[PATCH] qla3xxx NIC driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211207082416.GA16110@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14net: fec: only clear interrupt of handling queue in fec_enet_rx_queue()Joakim Zhang2-1/+4
commit b5bd95d17102b6719e3531d627875b9690371383 upstream. Background: We have a customer is running a Profinet stack on the 8MM which receives and responds PNIO packets every 4ms and PNIO-CM packets every 40ms. However, from time to time the received PNIO-CM package is "stock" and is only handled when receiving a new PNIO-CM or DCERPC-Ping packet (tcpdump shows the PNIO-CM and the DCERPC-Ping packet at the same time but the PNIO-CM HW timestamp is from the expected 40 ms and not the 2s delay of the DCERPC-Ping). After debugging, we noticed PNIO, PNIO-CM and DCERPC-Ping packets would be handled by different RX queues. The root cause should be driver ack all queues' interrupt when handle a specific queue in fec_enet_rx_queue(). The blamed patch is introduced to receive as much packets as possible once to avoid interrupt flooding. But it's unreasonable to clear other queues'interrupt when handling one queue, this patch tries to fix it. Fixes: ed63f1dcd578 (net: fec: clear receive interrupts before processing a packet) Cc: Russell King <rmk+kernel@arm.linux.org.uk> Reported-by: Nicolas Diaz <nicolas.diaz@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20211206135457.15946-1-qiangqing.zhang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14net: altera: set a couple error code in probe()Dan Carpenter1-3/+6
commit badd7857f5c933a3dc34942a2c11d67fdbdc24de upstream. There are two error paths which accidentally return success instead of a negative error code. Fixes: bbd2190ce96d ("Altera TSE: Add main and header file for Altera Ethernet Driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zeroLee Jones1-0/+2
commit 2be6d4d16a0849455a5c22490e3c5983495fed00 upstream. Currently, due to the sequential use of min_t() and clamp_t() macros, in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is not set, the logic sets tx_max to 0. This is then used to allocate the data area of the SKB requested later in cdc_ncm_fill_tx_frame(). This does not cause an issue presently because when memory is allocated during initialisation phase of SKB creation, more memory (512b) is allocated than is required for the SKB headers alone (320b), leaving some space (512b - 320b = 192b) for CDC data (172b). However, if more elements (for example 3 x u64 = [24b]) were added to one of the SKB header structs, say 'struct skb_shared_info', increasing its original size (320b [320b aligned]) to something larger (344b [384b aligned]), then suddenly the CDC data (172b) no longer fits in the spare SKB data area (512b - 384b = 128b). Consequently the SKB bounds checking semantics fails and panics: skbuff: skb_over_panic: text:ffffffff830a5b5f len:184 put:172 \ head:ffff888119227c00 data:ffff888119227c00 tail:0xb8 end:0x80 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:110! RIP: 0010:skb_panic+0x14f/0x160 net/core/skbuff.c:106 <snip> Call Trace: <IRQ> skb_over_panic+0x2c/0x30 net/core/skbuff.c:115 skb_put+0x205/0x210 net/core/skbuff.c:1877 skb_put_zero include/linux/skbuff.h:2270 [inline] cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1116 [inline] cdc_ncm_fill_tx_frame+0x127f/0x3d50 drivers/net/usb/cdc_ncm.c:1293 cdc_ncm_tx_fixup+0x98/0xf0 drivers/net/usb/cdc_ncm.c:1514 By overriding the max value with the default CDC_NCM_NTB_MAX_SIZE_TX when not offered through the system provided params, we ensure enough data space is allocated to handle the CDC data, meaning no crash will occur. Cc: Oliver Neukum <oliver@neukum.org> Fixes: 289507d3364f9 ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning") Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20211202143437.1411410-1-lee.jones@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14can: pch_can: pch_can_rx_normal: fix use after freeVincent Mailhol1-1/+1
commit 94cddf1e9227a171b27292509d59691819c458db upstream. After calling netif_receive_skb(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is dereferenced just after the call netif_receive_skb(skb). Reordering the lines solves the issue. Fixes: b21d18b51b31 ("can: Topcliff: Add PCH_CAN driver.") Link: https://lore.kernel.org/all/20211123111654.621610-1-mailhol.vincent@wanadoo.fr Cc: stable@vger.kernel.org Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14can: sja1000: fix use after free in ems_pcmcia_add_card()Dan Carpenter1-1/+6
commit 3ec6ca6b1a8e64389f0212b5a1b0f6fed1909e45 upstream. If the last channel is not available then "dev" is freed. Fortunately, we can just use "pdev->irq" instead. Also we should check if at least one channel was set up. Fixes: fd734c6f25ae ("can/sja1000: add driver for EMS PCMCIA card") Link: https://lore.kernel.org/all/20211124145041.GB13656@kili Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings()Zhou Qingyang1-2/+8
commit e2dabc4f7e7b60299c20a36d6a7b24ed9bf8e572 upstream. In qlcnic_83xx_add_rings(), the indirect function of ahw->hw_ops->alloc_mbx_args will be called to allocate memory for cmd.req.arg, and there is a dereference of it in qlcnic_83xx_add_rings(), which could lead to a NULL pointer dereference on failure of the indirect function like qlcnic_83xx_alloc_mbx_args(). Fix this bug by adding a check of alloc_mbx_args(), this patch imitates the logic of mbx_cmd()'s failure handling. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_QLCNIC=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: 7f9664525f9c ("qlcnic: 83xx memory map and HW access routine") Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Link: https://lore.kernel.org/r/20211130110848.109026-1-zhou1615@umn.edu Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08natsemi: xtensa: fix section mismatch warningsRandy Dunlap1-1/+1
commit b0f38e15979fa8851e88e8aa371367f264e7b6e9 upstream. Fix section mismatch warnings in xtsonic. The first one appears to be bogus and after fixing the second one, the first one is gone. WARNING: modpost: vmlinux.o(.text+0x529adc): Section mismatch in reference from the function sonic_get_stats() to the function .init.text:set_reset_devices() The function sonic_get_stats() references the function __init set_reset_devices(). This is often because sonic_get_stats lacks a __init annotation or the annotation of set_reset_devices is wrong. WARNING: modpost: vmlinux.o(.text+0x529b3b): Section mismatch in reference from the function xtsonic_probe() to the function .init.text:sonic_probe1() The function xtsonic_probe() references the function __init sonic_probe1(). This is often because xtsonic_probe lacks a __init annotation or the annotation of sonic_probe1 is wrong. Fixes: 74f2a5f0ef64 ("xtensa: Add support for the Sonic Ethernet device for the XT2000 board.") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Chris Zankel <chris@zankel.net> Cc: linux-xtensa@linux-xtensa.org Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Link: https://lore.kernel.org/r/20211130063947.7529-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08net: ethernet: dec: tulip: de4x5: fix possible array overflows in ↵Teng Qi1-0/+4
type3_infoblock() [ Upstream commit 0fa68da72c3be09e06dd833258ee89c33374195f ] The definition of macro MOTO_SROM_BUG is: #define MOTO_SROM_BUG (lp->active == 8 && (get_unaligned_le32( dev->dev_addr) & 0x00ffffff) == 0x3e0008) and the if statement if (MOTO_SROM_BUG) lp->active = 0; using this macro indicates lp->active could be 8. If lp->active is 8 and the second comparison of this macro is false. lp->active will remain 8 in: lp->phy[lp->active].gep = (*p ? p : NULL); p += (2 * (*p) + 1); lp->phy[lp->active].rst = (*p ? p : NULL); p += (2 * (*p) + 1); lp->phy[lp->active].mc = get_unaligned_le16(p); p += 2; lp->phy[lp->active].ana = get_unaligned_le16(p); p += 2; lp->phy[lp->active].fdx = get_unaligned_le16(p); p += 2; lp->phy[lp->active].ttm = get_unaligned_le16(p); p += 2; lp->phy[lp->active].mci = *p; However, the length of array lp->phy is 8, so array overflows can occur. To fix these possible array overflows, we first check lp->active and then return -EINVAL if it is greater or equal to ARRAY_SIZE(lp->phy) (i.e. 8). Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Teng Qi <starmiku1207184332@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of ↵zhangyue1-13/+17
bound [ Upstream commit 61217be886b5f7402843677e4be7e7e83de9cb41 ] In line 5001, if all id in the array 'lp->phy[8]' is not 0, when the 'for' end, the 'k' is 8. At this time, the array 'lp->phy[8]' may be out of bound. Signed-off-by: zhangyue <zhangyue1@kylinos.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08xen/netfront: don't trust the backend response data blindlyJuergen Gross1-5/+75
commit a884daa61a7d91650987e855464526aef219590f upstream. Today netfront will trust the backend to send only sane response data. In order to avoid privilege escalations or crashes in case of malicious backends verify the data to be within expected limits. Especially make sure that the response always references an outstanding request. Note that only the tx queue needs special id handling, as for the rx queue the id is equal to the index in the ring page. Introduce a new indicator for the device whether it is broken and let the device stop working when it is set. Set this indicator in case the backend sets any weird data. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08xen/netfront: disentangle tx_skb_freelistJuergen Gross1-36/+25
commit 21631d2d741a64a073e167c27769e73bc7844a2f upstream. The tx_skb_freelist elements are in a single linked list with the request id used as link reference. The per element link field is in a union with the skb pointer of an in use request. Move the link reference out of the union in order to enable a later reuse of it for requests which need a populated skb pointer. Rename add_id_to_freelist() and get_id_from_freelist() to add_id_to_list() and get_id_from_list() in order to prepare using those for other lists as well. Define ~0 as value to indicate the end of a list and place that value into the link for a request not being on the list. When freeing a skb zero the skb pointer in the request. Use a NULL value of the skb pointer instead of skb_entry_is_link() for deciding whether a request has a skb linked to it. Remove skb_entry_set_link() and open code it instead as it is really trivial now. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08xen/netfront: don't read data from request on the ring pageJuergen Gross1-43/+37
commit 162081ec33c2686afa29d91bf8d302824aa846c7 upstream. In order to avoid a malicious backend being able to influence the local processing of a request build the request locally first and then copy it to the ring page. Any reading from the request influencing the processing in the frontend needs to be done on the local instance. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08xen/netfront: read response from backend only onceJuergen Gross1-19/+19
commit 8446066bf8c1f9f7b7412c43fbea0fb87464d75b upstream. In order to avoid problems in case the backend is modifying a response on the ring page while the frontend has already seen it, just read the response into a local buffer in one go and then operate on that buffer only. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-26tun: fix bonding active backup with arp monitoringNicolas Dichtel1-0/+5
commit a31d27fbed5d518734cb60956303eb15089a7634 upstream. As stated in the bonding doc, trans_start must be set manually for drivers using NETIF_F_LLTX: Drivers that use NETIF_F_LLTX flag must also update netdev_queue->trans_start. If they do not, then the ARP monitor will immediately fail any slaves using that driver, and those slaves will stay down. Link: https://www.kernel.org/doc/html/v5.15/networking/bonding.html#arp-monitor-operation Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-26net: bnx2x: fix variable dereferenced before checkPavel Skripkin1-1/+3
[ Upstream commit f8885ac89ce310570e5391fe0bf0ec9c7c9b4fdc ] Smatch says: bnx2x_init_ops.h:640 bnx2x_ilt_client_mem_op() warn: variable dereferenced before check 'ilt' (see line 638) Move ilt_cli variable initialization _after_ ilt validation, because it's unsafe to deref the pointer before validation check. Fixes: 523224a3b3cd ("bnx2x, cnic, bnx2i: use new FW/HSI") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-08-15 17:50:23 +0300