summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2016-12-30rtlwifi: rtl_usb: Fix missing entry in USB driver's private dataLarry Finger1-0/+1
These drivers need to be able to reference "struct ieee80211_hw" from the driver's private data, and vice versa. The USB driver failed to store the address of ieee80211_hw in the private data. Although this bug has been present for a long time, it was not exposed until commit ba9f93f82aba ("rtlwifi: Fix enter/exit power_save"). Fixes: ba9f93f82aba ("rtlwifi: Fix enter/exit power_save") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-30orinoco: Use shash instead of ahash for MIC calculationsAndrew Lutomirski3-21/+30
Eric Biggers pointed out that the orinoco driver pointed scatterlists at the stack. Fix it by switching from ahash to shash. The result should be simpler, faster, and more correct. kvalo: cherry picked from commit 1fef293b8a9850cfa124a53c1d8878d355010403 as I accidentally applied this patch to wireless-drivers-next when I was supposed to apply this wireless-drivers Cc: stable@vger.kernel.org # 4.9 only Reported-by: Eric Biggers <ebiggers3@gmail.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-25ktime: Cleanup ktime_set() usageThomas Gleixner1-2/+2
ktime_set(S,N) was required for the timespec storage type and is still useful for situations where a Seconds and Nanoseconds part of a time value needs to be converted. For anything where the Seconds argument is 0, this is pointless and can be replaced with a simple assignment. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds12-12/+12
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-21rtlwifi: Fix kernel oops introduced with commit e49656147359Larry Finger1-1/+2
With commit e49656147359 {"rtlwifi: Use dev_kfree_skb_irq instead of kfree_skb"), the method used to free an skb was changed because the kfree_skb() was inside a spinlock. What was forgotten is that kfree_skb() guards against a NULL value for the argument. Routine dev_kfree_skb_irq() does not, and a test is needed to prevent kernel panics. Fixes: e49656147359 ("rtlwifi: Use dev_kfree_skb_irq instead of kfree_skb") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> # 4.9+ Cc: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-21ath9k: do not return early to fix rcu unlockingTobias Klausmann1-1/+1
Starting with commit d94a461d7a7d ("ath9k: use ieee80211_tx_status_noskb where possible") the driver uses rcu_read_lock() && rcu_read_unlock(), yet on returning early in ath_tx_edma_tasklet() the unlock is missing leading to stalls and suspicious RCU usage: =============================== [ INFO: suspicious RCU usage. ] 4.9.0-rc8 #11 Not tainted ------------------------------- kernel/rcu/tree.c:705 Illegal idle entry in RCU read-side critical section.! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 RCU used illegally from extended quiescent state! 1 lock held by swapper/7/0: #0: ( rcu_read_lock ){......} , at: [<ffffffffa06ed110>] ath_tx_edma_tasklet+0x0/0x450 [ath9k] stack backtrace: CPU: 7 PID: 0 Comm: swapper/7 Not tainted 4.9.0-rc8 #11 Hardware name: Acer Aspire V3-571G/VA50_HC_CR, BIOS V2.21 12/16/2013 ffff88025efc3f38 ffffffff8132b1e5 ffff88017ede4540 0000000000000001 ffff88025efc3f68 ffffffff810a25f7 ffff88025efcee60 ffff88017edebdd8 ffff88025eeb5400 0000000000000091 ffff88025efc3f88 ffffffff810c3cd4 Call Trace: <IRQ> [<ffffffff8132b1e5>] dump_stack+0x68/0x93 [<ffffffff810a25f7>] lockdep_rcu_suspicious+0xd7/0x110 [<ffffffff810c3cd4>] rcu_eqs_enter_common.constprop.85+0x154/0x200 [<ffffffff810c5a54>] rcu_irq_exit+0x44/0xa0 [<ffffffff81058631>] irq_exit+0x61/0xd0 [<ffffffff81018d25>] do_IRQ+0x65/0x110 [<ffffffff81672189>] common_interrupt+0x89/0x89 <EOI> [<ffffffff814ffe11>] ? cpuidle_enter_state+0x151/0x200 [<ffffffff814ffee2>] cpuidle_enter+0x12/0x20 [<ffffffff8109a6ae>] call_cpuidle+0x1e/0x40 [<ffffffff8109a8f6>] cpu_startup_entry+0x146/0x220 [<ffffffff810336f8>] start_secondary+0x148/0x170 Signed-off-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Fixes: d94a461d7a7d ("ath9k: use ieee80211_tx_status_noskb where possible") Cc: <stable@vger.kernel.org> # v4.9 Acked-by: Felix Fietkau <nbd@nbd.name> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Gabriel Craciunescu <nix.or.die@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-20ath10k: free host-mem with DMA_BIRECTIONAL flagBen Greear1-1/+1
Hopefully this fixes the problem reported by Kalle: Noticed this in my log, but I don't have time to investigate this in detail right now: [ 413.795346] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 414.158755] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 477.439659] ath10k_pci 0000:02:00.0: could not get mac80211 beacon [ 481.666630] ------------[ cut here ]------------ [ 481.666669] WARNING: CPU: 0 PID: 1978 at lib/dma-debug.c:1155 check_unmap+0x320/0x8e0 [ 481.666688] ath10k_pci 0000:02:00.0: DMA-API: device driver frees DMA memory with different direction [device address=0x000000002d130000] [size=63800 bytes] [mapped with DMA_BIDIRECTIONAL] [unmapped with DMA_TO_DEVICE] [ 481.666703] Modules linked in: ctr ccm ath10k_pci(E-) ath10k_core(E) ath(E) mac80211(E) cfg80211(E) snd_hda_codec_hdmi snd_hda_codec_idt snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi arc4 snd_rawmidi snd_seq_midi_event snd_seq btusb btintel snd_seq_device joydev coret [ 481.671468] CPU: 0 PID: 1978 Comm: rmmod Tainted: G E 4.9.0-rc7-wt+ #54 [ 481.671478] Hardware name: Hewlett-Packard HP ProBook 6540b/1722, BIOS 68CDD Ver. F.04 01/27/2010 [ 481.671489] ef49dcec c842ee92 c8b5830e ef49dd34 ef49dd20 c80850f5 c8b5a13c ef49dd50 [ 481.671560] 000007ba c8b5830e 00000483 c8461830 c8461830 00000483 ef49ddcc f34e64b8 [ 481.671641] c8b58360 ef49dd3c c80851bb 00000009 00000000 ef49dd34 c8b5a13c ef49dd50 [ 481.671716] Call Trace: [ 481.671731] [<c842ee92>] dump_stack+0x76/0xb4 [ 481.671745] [<c80850f5>] __warn+0xe5/0x100 [ 481.671757] [<c8461830>] ? check_unmap+0x320/0x8e0 [ 481.671769] [<c8461830>] ? check_unmap+0x320/0x8e0 [ 481.671780] [<c80851bb>] warn_slowpath_fmt+0x3b/0x40 [ 481.671791] [<c8461830>] check_unmap+0x320/0x8e0 [ 481.671804] [<c8462054>] debug_dma_unmap_page+0x84/0xa0 [ 481.671835] [<f937cd7a>] ath10k_wmi_free_host_mem+0x9a/0xe0 [ath10k_core] [ 481.671861] [<f9363400>] ath10k_core_destroy+0x50/0x60 [ath10k_core] [ 481.671875] [<f8e13969>] ath10k_pci_remove+0x79/0xa0 [ath10k_pci] [ 481.671889] [<c848d8d8>] pci_device_remove+0x38/0xb0 [ 481.671901] [<c859fe4b>] __device_release_driver+0x7b/0x110 [ 481.671913] [<c85a00e7>] driver_detach+0x97/0xa0 [ 481.671923] [<c859ef8b>] bus_remove_driver+0x4b/0xb0 [ 481.671934] [<c85a0cda>] driver_unregister+0x2a/0x60 [ 481.671949] [<c848c888>] pci_unregister_driver+0x18/0x70 [ 481.671965] [<f8e14dae>] ath10k_pci_exit+0xd/0x25f [ath10k_pci] [ 481.671979] [<c812bb84>] SyS_delete_module+0xf4/0x180 [ 481.671995] [<c81f801b>] ? __might_fault+0x8b/0xa0 [ 481.672009] [<c80037d0>] do_fast_syscall_32+0xa0/0x1e0 [ 481.672025] [<c88d4c88>] sysenter_past_esp+0x45/0x74 [ 481.672037] ---[ end trace 3fd23759e17e1622 ]--- [ 481.672049] Mapped at: [ 481.672060] [ 481.672072] [<c846062c>] debug_dma_map_page.part.25+0x1c/0xf0 [ 481.672083] [ 481.672095] [<c8460799>] debug_dma_map_page+0x99/0xc0 [ 481.672106] [ 481.672132] [<f93745ec>] ath10k_wmi_alloc_chunk+0x12c/0x1f0 [ath10k_core] [ 481.672142] [ 481.672168] [<f937d0c4>] ath10k_wmi_event_service_ready_work+0x304/0x540 [ath10k_core] [ 481.672178] [ 481.672190] [<c80a3643>] process_one_work+0x1c3/0x670 [ 482.137134] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 482.313144] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:02:00.0.bin failed with error -2 [ 482.313274] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/cal-pci-0000:02:00.0.bin failed with error -2 [ 482.313768] ath10k_pci 0000:02:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000 [ 482.313777] ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 0 testmode 1 [ 482.313974] ath10k_pci 0000:02:00.0: firmware ver 10.2.4.70.59-2 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 4159f498 [ 482.369858] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2 [ 482.370011] ath10k_pci 0000:02:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08 [ 483.596770] ath10k_pci 0000:02:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1 [ 483.701686] ath: EEPROM regdomain: 0x0 [ 483.701706] ath: EEPROM indicates default country code should be used [ 483.701713] ath: doing EEPROM country->regdmn map search [ 483.701721] ath: country maps to regdmn code: 0x3a [ 483.701730] ath: Country alpha2 being used: US [ 483.701737] ath: Regpair used: 0x3a Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-20brcmfmac: fix uninitialized field in scheduled scan ssid configurationArend Van Spriel1-0/+1
The scheduled scan ssid configuration in firmware has a flags field that was not initialized resulting in unexpected behaviour. Fixes: e3bdb7cc0300 ("brcmfmac: fix handling ssids in .sched_scan_start() callback") Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-20brcmfmac: fix memory leak in brcmf_cfg80211_attach()Arend Van Spriel1-2/+5
In brcmf_cfg80211_attach() there was one error path not properly handled as it leaked memory allocated in brcmf_btcoex_attach(). Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-16Makefile: drop -D__CHECK_ENDIAN__ from cflagsMichael S. Tsirkin25-47/+3
That's the default now, no need for makefiles to set it. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
2016-12-16linux: drop __bitwise__ everywhereMichael S. Tsirkin1-2/+2
__bitwise__ used to mean "yes, please enable sparse checks unconditionally", but now that we dropped __CHECK_ENDIAN__ __bitwise is exactly the same. There aren't many users, replace it by __bitwise everywhere. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Stefan Schmidt <stefan@osg.samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Akced-by: Lee Duncan <lduncan@suse.com>
2016-12-15Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-2/+1
Merge more updates from Andrew Morton: - a few misc things - kexec updates - DMA-mapping updates to better support networking DMA operations - IPC updates - various MM changes to improve DAX fault handling - lots of radix-tree changes, mainly to the test suite. All leading up to reimplementing the IDA/IDR code to be a wrapper layer over the radix-tree. However the final trigger-pulling patch is held off for 4.11. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (114 commits) radix tree test suite: delete unused rcupdate.c radix tree test suite: add new tag check radix-tree: ensure counts are initialised radix tree test suite: cache recently freed objects radix tree test suite: add some more functionality idr: reduce the number of bits per level from 8 to 6 rxrpc: abstract away knowledge of IDR internals tpm: use idr_find(), not idr_find_slowpath() idr: add ida_is_empty radix tree test suite: check multiorder iteration radix-tree: fix replacement for multiorder entries radix-tree: add radix_tree_split_preload() radix-tree: add radix_tree_split radix-tree: add radix_tree_join radix-tree: delete radix_tree_range_tag_if_tagged() radix-tree: delete radix_tree_locate_item() radix-tree: improve multiorder iterators btrfs: fix race in btrfs_free_dummy_fs_info() radix-tree: improve dump output radix-tree: make radix_tree_find_next_bit more useful ...
2016-12-15drivers/net/wireless/intel/iwlwifi/dvm/calib.c: simplfy min() expressionAndrew Morton1-2/+1
This cast is no longer needed. Cc: Johannes Berg <johannes.berg@intel.com> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Intel Linux Wireless <linuxwifi@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14Merge branch 'for-linus' of ↵Linus Torvalds3-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: NTB: correct ntb_spad_count comment typo misc: ibmasm: fix typo in error message Remove references to dead make variable LINUX_INCLUDE Remove last traces of ikconfig.h treewide: Fix printk() message errors Documentation/device-mapper: s/getsize/getsz/
2016-12-14treewide: Fix printk() message errorsMasanari Iida3-3/+3
This patch fix spelling typos in printk and kconfig. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-12-03iwlwifi: use reset to set transport headerZhang Shengju1-1/+1
Since offset is zero, it's not necessary to use set function. Reset function is straightforward, and will remove the unnecessary add operation in set function. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-6/+7
Couple conflicts resolved here: 1) In the MACB driver, a bug fix to properly initialize the RX tail pointer properly overlapped with some changes to support variable sized rings. 2) In XGBE we had a "CONFIG_PM" --> "CONFIG_PM_SLEEP" fix overlapping with a reorganization of the driver to support ACPI, OF, as well as PCI variants of the chip. 3) In 'net' we had several probe error path bug fixes to the stmmac driver, meanwhile a lot of this code was cleaned up and reorganized in 'net-next'. 4) The cls_flower classifier obtained a helper function in 'net-next' called __fl_delete() and this overlapped with Daniel Borkamann's bug fix to use RCU for object destruction in 'net'. It also overlapped with Jiri's change to guard the rhashtable_remove_fast() call with a check against tc_skip_sw(). 5) In mlx4, a revert bug fix in 'net' overlapped with some unrelated changes in 'net-next'. 6) In geneve, a stale header pointer after pskb_expand_head() bug fix in 'net' overlapped with a large reorganization of the same code in 'net-next'. Since the 'net-next' code no longer had the bug in question, there was nothing to do other than to simply take the 'net-next' hunks. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02Merge tag 'wireless-drivers-next-for-davem-2016-12-01' of ↵David S. Miller64-788/+2559
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.10 Major changes: rsi * filter rx frames * configure tx power * make it possible to select antenna * support 802.11d brcmfmac * cleanup of scheduled scan code * support for bcm43341 chipset with different chip id * support rev6 of PCIe device interface ath10k * add spectral scan support for QCA6174 and QCA9377 families * show used tx bitrate with 10.4 firmware wil6210 * add power save mode support * add abort scan functionality * add support settings retry limit for short frames bcma * add Dell Inspiron 3148 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-01Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo29-330/+1461
ath.git patches for 4.10. Major changes: ath10k * add spectral scan support for QCA6174 and QCA9377 families * show used tx bitrate with 10.4 firmware wil6210 * add power save mode support * add abort scan functionality * add support settings retry limit for short frames
2016-12-01rtl8xxxu: Work around issue with 8192eu and 8723bu devices not reconnectingJes Sorensen1-0/+8
The H2C MEDIA_STATUS_RPT command for some reason causes 8192eu and 8723bu devices not being able to reconnect. Reported-by: Barry Day <briselec@gmail.com> Cc: <stable@vger.kernel.org> #4.8+ Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-01ath5k: drop duplicate header vmalloc.hGeliang Tang1-1/+0
Drop duplicate header vmalloc.h from ath5k/debug.c. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01wil6210: align to latest auto generated wmi.hLior David1-128/+264
Align to latest version of the auto generated wmi file describing the interface with FW. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01wil6210: add debugfs blobs for UCODE code and dataLior David3-15/+33
Added new areas to fw_mappings area for UCODE code and data areas. The new areas are only exposed through debugfs blobs, and mainly needed to access UCODE logs. The change does not affect crash dumps because the newly added areas overlap with the "upper" area which is already dumped. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01wil6210: validate wil_pmc_alloc parametersMaya Erez1-6/+49
num_descriptors and descriptor_size needs to be checked for: 1) not being negative values 2) no overflow occurs when these are multiplied together as done in wil_pmc_read. An overflow of two signed integers is undefined behavior. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01wil6210: delay remain on channel when scan is activeLior David5-61/+149
Currently it was possible to call remain_on_channel(ROC) while scan was active and this caused a crash in the FW. In order to fix this problem and make the behavior consistent with other drivers, queue the ROC in case a scan is active and try it again when scan is done. As part of the fix, clean up some locking issues and return error if scan is called while ROC is active. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01ath9k_htc: don't use HZ for usb msg timeoutsAnthony Romano2-4/+7
The usb_*_msg() functions expect a timeout in msecs but are given HZ, which is ticks per second. If HZ=100, firmware download often times out when there is modest USB utilization and the device fails to initialize. Replaces HZ in usb_*_msg timeouts with 1000 msec since HZ is one second for timeouts in jiffies. Signed-off-by: Anthony Romano <anthony.romano@coreos.com> Acked-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01ath9k: constify ath_bus_ops structureBhumika Goyal1-1/+1
Declare the structure ath_bus_ops as const as it is only passed as an argument to the function ath9k_init_device. This argument is of type const struct ath_bus_ops *, so ath_bus_ops structures with this property can be declared as const. Done using Coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ static struct ath_bus_ops i@p = {...}; @ok1@ identifier r1.i; position p; expression e1,e2; @@ ath9k_init_device(e1,e2,&i@p) @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ static +const struct ath_bus_ops i={...}; @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct ath_bus_ops i; File size before: text data bss dec hex filename 1295 232 0 1527 5f7 ath/ath9k/ahb.o File size after: text data bss dec hex filename 1359 176 0 1535 5ff ath/ath9k/ahb.o Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01ath10k: wmi-alloc-chunk should use DMA_BIDIRECTIONALBen Greear1-1/+1
These memory chunks are often used as 'swap' by the NIC, so it will be both reading and writing to these areas. This seems to fix errors like this on my x86-64 machine: kernel: DMAR: DMAR:[DMA Write] Request device [05:00.0] fault addr ff5de000 DMAR:[fault reason 05] PTE Write access is not set Tested-by: Marek Behun <kabel@blackhole.sk> Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01ath10k: fix Tx DMA alloc failure during continuous wifi down/upMohammed Shafi Shajakhan3-14/+51
With maximum number of vap's configured in a two radio supported systems of ~256 Mb RAM, doing a continuous wifi down/up and intermittent traffic streaming from the connected stations results in failure to allocate contiguous memory for tx buffers. This results in the disappearance of all VAP's and a manual reboot is needed as this is not a crash (or) OOM(for OOM killer to be invoked). To address this allocate contiguous memory for tx buffers one time and re-use them until the modules are unloaded but this results in a slight increase in memory footprint of ath10k when the wifi is down, but the modules are still loaded. Also as of now we use a separate bool 'tx_mem_allocated' to keep track of the one time memory allocation, as we cannot come up with something like 'ath10k_tx_{register,unregister}' before 'ath10k_probe_fw' is called as 'ath10k_htt_tx_alloc_cont_frag_desc' memory allocation is dependent on the hw_param 'continuous_frag_desc' a) memory footprint of ath10k without the change lsmod | grep ath10k ath10k_core 414498 1 ath10k_pci ath10k_pci 38236 0 b) memory footprint of ath10k with the change ath10k_core 414980 1 ath10k_pci ath10k_pci 38236 0 Memory Failure Call trace: hostapd: page allocation failure: order:6, mode:0xd0 [<c021f150>] (__dma_alloc_buffer.isra.23) from [<c021f23c>] (__alloc_remap_buffer.isra.26+0x14/0xb8) [<c021f23c>] (__alloc_remap_buffer.isra.26) from [<c021f664>] (__dma_alloc+0x224/0x2b8) [<c021f664>] (__dma_alloc) from [<c021f810>] (arm_dma_alloc+0x84/0x90) [<c021f810>] (arm_dma_alloc) from [<bf954764>] (ath10k_htt_tx_alloc+0xe0/0x2e4 [ath10k_core]) [<bf954764>] (ath10k_htt_tx_alloc [ath10k_core]) from [<bf94e6ac>] (ath10k_core_start+0x538/0xcf8 [ath10k_core]) [<bf94e6ac>] (ath10k_core_start [ath10k_core]) from [<bf947eec>] (ath10k_start+0xbc/0x56c [ath10k_core]) [<bf947eec>] (ath10k_start [ath10k_core]) from [<bf8a7a04>] (drv_start+0x40/0x5c [mac80211]) [<bf8a7a04>] (drv_start [mac80211]) from [<bf8b7cf8>] (ieee80211_do_open+0x170/0x82c [mac80211]) [<bf8b7cf8>] (ieee80211_do_open [mac80211]) from [<c056afc8>] (__dev_open+0xa0/0xf4) [21053.491752] Normal: 641*4kB (UEMR) 505*8kB (UEMR) 330*16kB (UEMR) 126*32kB (UEMR) 762*64kB (UEMR) 237*128kB (UEMR) 1*256kB (M) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 95276kB Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01ath10k: fix soft lockup during firmware crash/hw-restartMohammed Shafi Shajakhan2-2/+1
During firmware crash (or) user requested manual restart the system gets into a soft lock up state because of the below root cause. During user requested hardware restart / firmware crash the system goes into a soft lockup state as 'napi_synchronize' is called after 'napi_disable' (which sets 'NAPI_STATE_SCHED' bit) and it sleeps into infinite loop as it waits for 'NAPI_STATE_SCHED' to be cleared. This condition is hit because 'ath10k_hif_stop' is called twice as below (resulting in calling 'napi_synchronize' after 'napi_disable') 'ath10k_core_restart' -> 'ath10k_hif_stop' (ATH10K_STATE_ON) -> -> 'ieee80211_restart_hw' -> 'ath10k_start' -> 'ath10k_halt' -> 'ath10k_core_stop' -> 'ath10k_hif_stop' (ATH10K_STATE_RESTARTING) Fix this by calling 'ath10k_halt' in ath10k_core_restart itself as it makes more sense before informing mac80211 to restart h/w Also remove 'ath10k_halt' in ath10k_start for the state of 'restarting' Fixes: 3c97f5de1f28 ("ath10k: implement NAPI support") Cc: <stable@vger.kernel.org> # v4.9 Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01ath10k: fix TLV set regdomain commandErik Stromdahl1-2/+2
There is a typo bug in the current implementation of ath10k_wmi_tlv_op_gen_pdev_set_rd. The conformance test limits are not set up properly. The two arguments ctl2g and ctl5g were not used at all. Instead, the regdomain arguments rd2g and rd5g were used for the ctl settings as well. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01ath9k: feed only active spectral / dfs-detectorZefir Kurtisi1-3/+14
Radar pulse and spectral scan reports are provided by the HW with the ATH9K_RXERR_PHY flag set. Those are forwarded to the dfs-detector and spectral module for further processing. For some older chips, the pre-conditions checked in those modules are ambiguous, since ATH9K_PHYERR_RADAR is used to tag both types. As a result, spectral frames are fed into the dfs-detector and vice versa. This could lead to a false radar detection on a non-DFS channel (which is uncritical), but more relevant it causes useless CPU load for processing invalid frames. This commit ensures that the dfs-detector and spectral collector are only fed when they are active. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-30Merge tag 'wireless-drivers-for-davem-2016-11-29' of ↵David S. Miller1-6/+7
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.9 mwifiex * properly terminate SSIDs so that uninitalised memory is not printed ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-29rtlwifi: Fix enter/exit power_saveLarry Finger4-27/+40
In commit a5ffbe0a1993 ("rtlwifi: Fix scheduling while atomic bug") and commit a269913c52ad ("rtlwifi: Rework rtl_lps_leave() and rtl_lps_enter() to use work queue"), an error was introduced in the power-save routines due to the fact that leaving PS was delayed by the use of a work queue. This problem is fixed by detecting if the enter or leave routines are in interrupt mode. If so, the workqueue is used to place the request. If in normal mode, the enter or leave routines are called directly. Fixes: a269913c52ad ("rtlwifi: Rework rtl_lps_leave() and rtl_lps_enter() to use work queue") Reported-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-29mt7601u: wait for clear rxq when stopping macAnthony Romano2-7/+10
mt7601u_mac_stop_hw should stop polling the rxq once it remains empty but instead continues polling after the rxq status stays clear; bringing down the interface takes about six seconds from this alone. Speed up path by exiting rxq loop once status repeatedly polls empty. Signed-off-by: Anthony Romano <anthony.romano@coreos.com> Reviewed-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-29brcmfmac: fix scheduled scan result handling for newer chipsArend Van Spriel2-1/+30
The scan results for scheduled scan as retrieved from the device have changed. A field has been added which is not needed. However, the appended info is. Luckily they are versioned so check that to find out the location of the appended data. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-29brcmfmac: use requested scan interval in scheduled scanArend Van Spriel3-3/+10
User-space can specify the interval for the scheduled scan. This interval is found in scheduled scan plan. The driver supports only one plan, which is legacy behaviour. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-29brcmfmac: remove restriction from .sched_scan_start() callbackArend Van Spriel1-4/+1
In the .sched_scan_start() callback a condition was checked whether a normal scan was ongoing. However, there is no need for this check as it is ok to start the scheduled scan irrespective whether or not a normal scan is ongoing. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-29brcmfmac: use provided channels for scheduled scanArend Van Spriel2-1/+41
User-space can provide list of channels in the schedule scan request. This was ignored so all channels supported and allowed by the device were used. This patch configures the device to use the channels as listed in the request. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-29brcmfmac: move scheduled scan activation to pno source fileArend Van Spriel3-110/+94
Rework .sched_scan_start() callback moving actual configuration of the device in pno source file. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-29brcmfmac: split up brcmf_pno_config() functionArend Van Spriel3-20/+68
The brcmf_pno_config() function handles two configurations in firmware. Split it and have caller sort out what is needed. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-29brcmfmac: make internal escan more genericArend Van Spriel2-82/+109
For scheduled scan we initiate an escan in firmware to obtain more info missing from the scheduled scan notification we get from firmware. For upcoming functionality this is also required so make it a bit more generic. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-29brcmfmac: change prototype for brcmf_do_escan()Arend Van Spriel1-5/+5
Reduce the number of parameters as the removed ones can be obtained through struct brcmf_if parameter. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-29brcmfmac: fix handling ssids in .sched_scan_start() callbackArend Van Spriel3-57/+76
The ssids list in the scheduled scan request were not properly taken into account when configuring in firmware. The hidden bit was set for any ssid resulting in active scanning for all. Only set it for ssids that are in the ssids list. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-29brcmfmac: move pno helper functions in separate source fileArend Van Spriel4-86/+150
Introducing new source file for pno related functionality. Moving existing pno functions. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-29brcmfmac: add support for 43341 chipArend Van Spriel2-0/+2
This chip was already supported, but seems a device came up giving a different chip identifier. So adding that effectively mapping to the same firmware file as for 43340 chip. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-29brcmfmac: add pcie host dongle interface rev6 supportFranky Lin4-91/+132
In rev6 of pcie host dongle interface protocol, host needs to maximum supported ring number from dongle shared memory and set up ring buffer and ring indices offset accordingly. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-29mwifiex: pcie: implement timeout loop for FW programming doorbellBrian Norris1-3/+13
Marvell Wifi PCIe modules don't always behave nicely for PCIe power management when their firmware hasn't been loaded, particularly after suspending the PCIe link one or more times. When this happens, we might end up spinning forever in this status-polling tight loop. Let's make this less tight by adding a timeout and by sleeping a bit in between reads, as we do with the other similar loops. This prevents us from hogging a CPU even in such pathological cases, and allows the FW initialization to just fail gracefully instead. I chose the same polling parameters as the earlier loop in this function, and empirically, I found that this loop never makes it more than about 12 cycles in a sane FW init sequence. I had no official information on the actual intended latency for this portion of the download. Signed-off-by: Brian Norris <briannorris@chromium.org> Acked-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-29mwifiex: Remove unused 'bcd_usb' variableKirtika Ruchandani1-2/+1
mwifiex_usb_probe() defines and sets bcd_usb but does not use it, Compiling with W=1 gives the following warning, fix it. mwifiex/usb.c: In function ‘mwifiex_usb_probe’: mwifiex/usb.c:383:41: warning: variable ‘bcd_usb’ set but not used [-Wunused-but-set-variable] The unused variable seems to be present since 4daffe354366 which introduced mwifiex_usb_probe(). Fixes: 4daffe354366 ("mwifiex: add support for Marvell USB8797 chipset") Cc: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kirtika Ruchandani <kirtika@google.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-29mwifiex: Removed unused 'pkt_type' variableKirtika Ruchandani1-3/+0
Commit 92263a841b15 introduced mwifiex_deaggr_sdio_pkt which initializes variable pkt_type but does not use it. Compiling with W=1 gives the following warning, fix it. mwifiex/sdio.c: In function ‘mwifiex_deaggr_sdio_pkt’: mwifiex/sdio.c:1198:6: warning: variable ‘pkt_type’ set but not used [-Wunused-but-set-variable] Fixes: 92263a841b15 ("mwifiex: add SDIO rx single port aggregation") Cc: Zhaoyang Liu <liuzy@marvell.com> Cc: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kirtika Ruchandani <kirtika@google.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-05-04 21:07:24 +0300