summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2015-01-19ath9k: fix race condition in irq processing during hardware resetFelix Fietkau1-4/+3
To fix invalid hardware accesses, the commit 872b5d814f99 ("ath9k: do not access hardware on IRQs during reset") made the irq handler ignore interrupts emitted after queueing a hardware reset (which disables the IRQ). This left a small time window for the IRQ to get re-enabled by the tasklet, which caused IRQ storms. Instead of returning IRQ_NONE when ATH_OP_HW_RESET is set, disable the IRQ entirely for the duration of the reset. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-19Merge tag 'iwlwifi-for-kalle-2015-01-15' of ↵Kalle Valo1-0/+7
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes * one fix for rfkill while scheduled scan is running. Linus's system hit this issue. WiFi would be unavailable after this has happpened because of bad state in cfg80211.
2015-01-18iwlwifi: mvm: abort scheduled scan upon RFKILLEmmanuel Grumbach1-0/+7
When we have an active scheduled scan, and the RFKILL interrupt kicks in, the stack will cancel the scheduled scan as part of the down flow. But cancelling scheduled scan usually implies sending a command to the firwmare which has been killed as part of the RFKILL interrupt handling. Because of that, we returned an error to mac80211 when it asked to stop the scheduled scan and didn't notify the end of the scheduled scan. Besides a fat warning, this led to a situation in which cfg80211 would refuse any new scan request. To disentangle this, fake that the scheduled scan has been stopped without sending the command to the firwmare, return 0 after having properly let cfg80211 know that the scan has been cancelled. This is basically the same as: commit 9b520d84957d63348e87c0f2cbd21d86e1e8f2f2 Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Date: Tue Nov 4 15:54:11 2014 +0200 iwlwifi: mvm: abort scan upon RFKILL This code existed but not for all the different FW APIs we support. Fix this. but for the scheduled scan case. Link: http://permalink.gmane.org/gmane.linux.kernel.wireless.general/133232 Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-15Merge tag 'iwlwifi-for-kalle-2015-01-13' of ↵Kalle Valo5-27/+59
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes * A fix for scan that fixes a firmware assertion * A fix that improves roaming behavior. Same fix has been tested for a while in iwldvm. This is a bit of a work around, but the real fix should be in mac80211 and will come later. * A fix for BARs that avoids a WARNING.
2015-01-13iwlwifi: mvm: set the tx cmd tid for BAR frame correctlyEyal Shapira1-2/+9
BAR tx cmd tid was set to non qos (8). This is wrong as BAR should be sent with the tid of the BA session. This led to a corruption in the firmware. The visible effect of this from the driver side is the BA notification that comes back after the BAR. It was botched and led to the WARNING below. ------------[ cut here ]------------ WARNING: CPU: 2 PID: 17707 at /home/tester/workspace_hostap/iwlwifi/drivers/net/wireless/iwlwifi/mvm/tx.c:976 iwl_mvm_rx_ba_notif+0x4ba/0x4d0 [iwlmvm]() Q 4500, tid 8, flow 65535 Modules linked in: iwlmvm(O) mac80211(O) iwlwifi(O) cfg80211(O) compat(O) netconsole configfs ctr ccm arc4 autofs4 microcode bnep rfcomm snd_hda_codec_hdmi snd_hda_codec_idt snd_hda_codec_generic snd_hda_intel joydev snd_hda_codec uvcvideo videobuf2_core snd_hwdep videodev snd_pcm videobuf2_vmalloc videobuf2_memops i915 snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device drm_kms_helper dell_wmi dell_laptop drm btusb bluetooth snd psmouse i2c_algo_bit sparse_keymap wmi soundcore 6lowpan_iphc dcdbas serio_raw video lpc_ich ppdev mac_hid parport_pc nfsd nfs_acl auth_rpcgss nfs fscache binfmt_misc lockd sunrpc lp parport msdos sdhci_pci sdhci mmc_core ahci libahci e1000e ptp pps_core [last unloaded: compat] CPU: 2 PID: 17707 Comm: irq/46-iwlwifi Tainted: G W O 3.14.17-patched #4 Hardware name: Dell Inc. Latitude E6430/0CPWYR, BIOS A09 12/13/2012 00000000 00000000 ebd49d6c c1616221 f985dbdc ebd49d9c c1044e44 f9861df4 ebd49dc8 0000452b f985dbdc 000003d0 f98395da f98395da ebd49f10 eaf3d8a4 0000ffff ebd49db4 c1044f03 00000009 ebd49dac f9861df4 ebd49dc8 ebd49e64 Call Trace: [<c1616221>] dump_stack+0x41/0x52 [<c1044e44>] warn_slowpath_common+0x84/0xa0 [<f98395da>] ? iwl_mvm_rx_ba_notif+0x4ba/0x4d0 [iwlmvm] [<f98395da>] ? iwl_mvm_rx_ba_notif+0x4ba/0x4d0 [iwlmvm] [<c1044f03>] warn_slowpath_fmt+0x33/0x40 [<f98395da>] iwl_mvm_rx_ba_notif+0x4ba/0x4d0 [iwlmvm] [<c10e3952>] ? ring_buffer_unlock_commit+0xa2/0xd0 [<c10e9767>] ? trace_buffer_unlock_commit+0x37/0x50 [<f98568a3>] ? iwl_tm_mvm_send_rx+0x53/0x90 [iwlmvm] [<f98327a8>] iwl_mvm_rx_dispatch+0x108/0x130 [iwlmvm] [<f9eac7e7>] iwl_pcie_irq_handler+0xf17/0x15b0 [iwlwifi] [<c10994c1>] irq_thread_fn+0x21/0x50 [<c109926c>] irq_thread+0xec/0x110 [<c10994a0>] ? irq_thread_dtor+0xb0/0xb0 [<c10993f0>] ? irq_finalize_oneshot.part.34+0xc0/0xc0 [<c1099180>] ? wake_threads_waitq+0x40/0x40 [<c1062fdb>] kthread+0x9b/0xb0 [<c1627137>] ret_from_kernel_thread+0x1b/0x28 [<c1062f40>] ? flush_kthread_worker+0x90/0x90 ---[ end trace 5e0f67374816db17 ]--- Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-12iwlwifi: mvm: drop non VO frames when flushingEmmanuel Grumbach1-11/+9
This change has already been implemented in iwldvm: commit a260e7b3f0307878b99d57ed1406cf2d497923b8 Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Date: Sun Oct 5 09:11:14 2014 +0300 iwlwifi: dvm: drop non VO frames when flushing Since I added the flush() callback implementation in mvm, we got reports that the queues are stuck while roaming or suspending. This commit above helped much for iwldvm, implement the same behavior for iwlmvm. CC: <stable@vger.kernel.org> [3.16+] Fixes: c5b0e7c0565a ("iwlwifi: mvm: implement mac80211's flush callback") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-12iwlwifi: mvm: fix EBS on single scanDavid Spinadel3-14/+41
EBS error detection isn't supported by all FWs, so turn it on only if the FW advertises such support. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-05Merge tag 'iwlwifi-for-kalle-2015-01-05' of ↵Kalle Valo8-13/+34
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes * fix for 7265D NVM check * fixes for scan: fix long scanning times and network discovery * new firmware API for iwlmvm supported devices * fixes in rate control
2015-01-05iwlwifi: bump firmware API for mvm devices to 12Emmanuel Grumbach2-3/+3
This allows 3160 / 7260 / 7265 / 7265D / 8000 devices to use the latest version of the firmware. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-05iwlwifi: mvm: scan dwell time correctionsDavid Spinadel2-5/+16
Use only basic dwell time (10 ms for active scan and 110 for passive), regardless of the number of the probes and the band, if it is supported by the FW. The FW will add 3 ms for each probe sent and 10 ms for low band channels. Add a TLV flag to indicate such support in FW. This fix is needed to fix few bugs regarding scans that take too much time. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-05iwlwifi: mvm: add a flag to enable match found notificationDavid Spinadel2-0/+4
Add a flag that enables match found notification to align with FW API change. Cc: <stable@vger.kernel.org> [3.17+] Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-05iwlwifi: mvm: fix out of bounds access to tid_to_mac80211_acEyal Shapira1-2/+6
When tid_tspec was set to IWL_TID_NON_QOS (8) this led to an out of bounds access to the tid_to_mac80211_ac array whose size is 7. Fix this. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-05iwlwifi: mvm: fix Rx with both chainsEyal Shapira1-1/+1
commit 5c90422439d6 "iwlwifi: mvm: don't allow diversity if BT Coex / TT forbid it" broke Rx with 2 chains for diversity. This had an impact on throughput where we're using only a single stream (11a/b/g APs, single stream APs, static SMPS). Fixes: 5c90422439d6 ("iwlwifi: mvm: don't allow diversity if BT Coex / TT forbid it") Cc: Stable <stable@vger.kernel.org> [3.16+] Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-05iwlwifi: 7000: fix reported firmware name for 7265DEmmanuel Grumbach1-1/+1
We were advertising iwlwifi-7265-X.ucode instead of iwlwifi-7265D-X.ucode. Fix this. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-05iwlwifi: pcie: correctly define 7265-D cfgArik Nemtsov1-1/+3
The trans cfg was not replaced for 7265-D cards. This led to a check of the min-NVM version against a 7265-C card, causing very-old 7265-D cards to operate incorrectly with the driver. Fixes: 3fd0d3c170ad ("iwlwifi: pcie: support 7265-D devices") Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-05rtlwifi: Fix error when accessing unmapped memory in skbLarry Finger1-8/+24
These drivers use 9100-byte receive buffers, thus allocating an skb requires an O(3) memory allocation. Under heavy memory loads and fragmentation, such a request can fail. Previous versions of the driver have dropped the packet and reused the old buffer; however, the new version introduced a bug in that it released the old buffer before trying to allocate a new one. The previous method is implemented here. The skb is unmapped before any attempt is made to allocate another. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [v3.18] Reported-by: Eric Biggers <ebiggers3@gmail.com> Cc: Eric Biggers <ebiggers3@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-12-24brcmfmac: Do not crash if platform data is not populatedMika Westerberg1-2/+2
The driver looks for pdata->oob_irq_supported to find out if wowl can be supported. However, not all platforms populate pdata in which case we crash the kernel because of NULL pointer dereference. Fixes: 330b4e4be937 ("brcmfmac: Add wowl support for SDIO devices.") Reported-by: Christophe Prigent <christophe.prigent@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-12-24ipw2200: select CFG80211_WEXTPaul Bolle1-1/+2
Commit 24a0aa212ee2 ("cfg80211: make WEXT compatibility unselectable") made it impossible to depend on CFG80211_WEXT. It does still allow to select that symbol. (Yes, the commit summary is confusing.) So make IPW2200 select CFG80211_WEXT, so that the ipw2200 driver can be enabled in config again. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-12-21Merge tag 'iwlwifi-fixes-for-kalle-2014-12-18' of ↵Kalle Valo5-9/+30
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes I have here new device IDs and a fix for double free bug I introduced. I also fix an issue with the RFKILL interrupt - the HW needs us to ACK the interrupt again after we reset it. Liad fixes an issue with the firmware debugging infrastructure. While working on torture scenarios of firmware restarts, Eliad found an issue which he fixed.
2014-12-15rtlwifi: rtl8192ce: Set fw_ready flagLarry Finger1-0/+2
The setting of this flag was missed in previous modifications. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-15brcmsmac: don't leak kernel memory via printk()Brian Norris1-1/+1
Debug code prints the fifo name via custom dev_warn() wrappers. The fifo_names array is only non-zero when debugging is manually enabled, which is all well and good. However, it's *not* good that this array uses zero-length arrays in the non-debug case, and so it doesn't actually have any memory allocated to it. This means that as far as we know, fifo_names[i] actually points to garbage memory. I've seen this in my log: [ 4601.205511] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: �GeL txop exceeded phylen 137/256 dur 1602/1504 So let's give this array space enough to fill it with a NULL byte. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Brett Rudley <brudley@broadcom.com> Cc: Arend van Spriel <arend@broadcom.com> Cc: "Franky (Zhenhui) Lin" <frankyl@broadcom.com> Cc: Hante Meuleman <meuleman@broadcom.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: brcm80211-dev-list@broadcom.com Cc: netdev@vger.kernel.org Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-15rtlwifi: rtl8192cu: Fix sparse non static symbol warningWei Yongjun1-1/+1
Fixes the following sparse warning: drivers/net/wireless/rtlwifi/rtl8192cu/hw.c:1595:6: warning: symbol 'usb_cmd_send_packet' was not declared. Should it be static? Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-15rtlwifi: rtl8821ae: fix misspelling of current function in stringJulia Lawall1-6/+5
Replace a misspelled function name by %s and then __func__. 8821 was written as 8812. This was done using Coccinelle, including the use of Levenshtein distance, as proposed by Rasmus Villemoes. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-15hostap_cs: fix misspelling of current function in stringJulia Lawall1-10/+5
Replace a misspelled function name by %s and then __func__. This was done using Coccinelle, including the use of Levenshtein distance, as proposed by Rasmus Villemoes. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-15zd1211rw: fix misspelling of current function in stringJulia Lawall1-3/+3
Replace a misspelled function name by %s and then __func__. This was done using Coccinelle, including the use of Levenshtein distance, as proposed by Rasmus Villemoes. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-15Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds9-257/+176
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-14iwlwifi: pcie: limit fw chunk sizes given to fhLiad Kaufman2-1/+2
New FW has chunks that are larger than the size limit of the FH's DMA. To make sure we don't crash it - actively limit the max size of each chunk. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-14iwlwifi: add new device IDs for 3165Emmanuel Grumbach1-0/+4
A few device IDs were added, reflect this change in the driver. Cc; <stable@vger.kernel.org> [3.13+] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-14iwlwifi: don't double free a pointer if no FW was foundEmmanuel Grumbach1-1/+1
In the very unlikely case in which no firmware could be, found. the same pointer was freed twice. Fix that. Fixes: 490fefebb6db ("iwlwifi: define the .ucode file format for debug") Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-14iwlwifi: pcie: re-ACK all interrupts after device resetEmmanuel Grumbach1-5/+10
When we reset the device, the CSR_INT gets cleared as well as CSR_INT_MASK. Meaning that we shouldn't get any interrupt but, due to a hardware bug, recent devices will keep sending interrupts. This leads to an interrupt storm while stopping the device. The way to fix this is to ACK all the interrupts after the device is reset so that the value of CSR_INT will stay 0xffffffff. Fixes: 522713c81e4e ("iwlwifi: pcie: properly reset the device") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-14iwlwifi: mvm: clear IN_HW_RESTART flag on stop()Eliad Peller1-2/+13
On stop(), we already cleared our internal state, and the restart_complete() callback won't be called, so simply clear the IN_HW_RESTART flag. Keeping the flag might result in invalid state on the next start(), preventing the driver starting properly. Additionally, don't take IWL_MVM_REF_UCODE_DOWN on stop() if hw restart was requested, as the ref was already taken in this case. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-12Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds6-3/+294
Pull MIPS updates from Ralf Baechle: "This is an unusually large pull request for MIPS - in parts because lots of patches missed the 3.18 deadline but primarily because some folks opened the flood gates. - Retire the MIPS-specific phys_t with the generic phys_addr_t. - Improvments for the backtrace code used by oprofile. - Better backtraces on SMP systems. - Cleanups for the Octeon platform code. - Cleanups and fixes for the Loongson platform code. - Cleanups and fixes to the firmware library. - Switch ATH79 platform to use the firmware library. - Grand overhault to the SEAD3 and Malta interrupt code. - Move the GIC interrupt code to drivers/irqchip - Lots of GIC cleanups and updates to the GIC code to use modern IRQ infrastructures and features of the kernel. - OF documentation updates for the GIC bindings - Move GIC clocksource driver to drivers/clocksource - Merge GIC clocksource driver with clockevent driver. - Further updates to bring the GIC clocksource driver up to date. - R3000 TLB code cleanups - Improvments to the Loongson 3 platform code. - Convert pr_warning to pr_warn. - Merge a bunch of small lantiq and ralink fixes that have been staged/lingering inside the openwrt tree for a while. - Update archhelp for IP22/IP32 - Fix a number of issues for Loongson 1B. - New clocksource and clockevent driver for Loongson 1B. - Further work on clk handling for Loongson 1B. - Platform work for Broadcom BMIPS. - Error handling cleanups for TurboChannel. - Fixes and optimization to the microMIPS support. - Option to disable the FTLB. - Dump more relevant information on machine check exception - Change binfmt to allow arch to examine PT_*PROC headers - Support for new style FPU register model in O32 - VDSO randomization. - BCM47xx cleanups - BCM47xx reimplement the way the kernel accesses NVRAM information. - Random cleanups - Add support for ATH25 platforms - Remove pointless locking code in some PCI platforms. - Some improvments to EVA support - Minor Alchemy cleanup" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (185 commits) MIPS: Add MFHC0 and MTHC0 instructions to uasm. MIPS: Cosmetic cleanups of page table headers. MIPS: Add CP0 macros for extended EntryLo registers MIPS: Remove now unused definition of phys_t. MIPS: Replace use of phys_t with phys_addr_t. MIPS: Replace MIPS-specific 64BIT_PHYS_ADDR with generic PHYS_ADDR_T_64BIT PCMCIA: Alchemy Don't select 64BIT_PHYS_ADDR in Kconfig. MIPS: lib: memset: Clean up some MIPS{EL,EB} ifdefery MIPS: iomap: Use __mem_{read,write}{b,w,l} for MMIO MIPS: <asm/types.h> fix indentation. MAINTAINERS: Add entry for BMIPS multiplatform kernel MIPS: Enable VDSO randomization MIPS: Remove a temporary hack for debugging cache flushes in SMTC configuration MIPS: Remove declaration of obsolete arch_init_clk_ops() MIPS: atomic.h: Reformat to fit in 79 columns MIPS: Apply `.insn' to fixup labels throughout MIPS: Fix microMIPS LL/SC immediate offsets MIPS: Kconfig: Only allow 32-bit microMIPS builds MIPS: signal.c: Fix an invalid cast in ISA mode bit handling MIPS: mm: Only build one microassembler that is suitable ...
2014-12-08Merge branch 'master' of ↵John W. Linville10-25/+53
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-12-06Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file ↵Greg Kroah-Hartman3-24/+100
entries" This reverts commit d32394fae95741d733b174ec1446f27765f80233. It has been reported to cause problems, Jeremiah writes: On an Acer C720 laptop if a suspend is performed the screen freezes, the machine locks up, and according to the indicator lights it does not enter suspend. A hard reset is required to get it running again. Reported-by: Jeremiah Mahler <jmmahler@gmail.com> Cc: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-05mwifiex: do not process broadcast mac address for del_staAvinash Patil1-20/+19
Generally broadcast mac address deauth is followed by stop_ap or start_ap. In both cases, FW already has provision to send deauth; so there is no need to handle broadcast mac deauthentication. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-05mwifiex: guard station nodes access by station list lockAvinash Patil4-3/+16
Station node entries should be guarded for whole of their reference instead of just while getting node entry from station list. It may happen that station node is retrieved may be deleted by deauthentication event while it is still in use. Reported by: Tim Shepard <shep@xplot.org> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-05mwifiex: delete peer station's RA list upon deauthenticationAvinash Patil3-0/+29
This patch adds support to delete peer station's RA lists upon station deautheticate event on AP interface. Patch also decrements TX pending count upon removing packets from RA list. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-05mwifiex: do not delete station entries in del_sta handlerAvinash Patil1-2/+0
A crash was observed while cfg80211 del_station handler is called while stopping AP. This was happening because we were deleting station list and Rx reorder table entries in del_sta handler. While station entry is being deleted here, it may happen that station deauth event from FW would also try to delete station entry. This patch fixes this crash by not deleting station entries in del_station handler. Entry would be deleted while processing station deauth event; which is triggered by del_station command to FW. Reported by: Tim Shepard <shep@xplot.org> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-04brcmfmac: add multiple BSS support.Hante Meuleman8-53/+272
This patch adds support for multiple BSS interfaces (AP). In total three AP configurations can be created. In order to use multiple BSS firmware needs to support it. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-04brcmfmac: Add ifidx to logging of fwil cmds.Hante Meuleman1-8/+10
Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-04brcmfmac: Fix vendor cmds used interface.Hante Meuleman1-6/+9
The vendor specific commands was always using main interface, change this to use the by caller supplied interface. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-04brcmfmac: switch to single message MSIFranky Lin1-0/+4
Use single message MSI to replace legacy interrupt. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-04brcmfmac: Add PCIE ids for 43602 devices.Hante Meuleman2-0/+4
Some 43602 devices are band specific and identify themselves with different PCIE device ID. This patch adds support for the 43602 2.4G and 5.0G devices used in for example R8000 router. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-04brcmfmac: Fix ifidx for rx data by msgbuf.Hante Meuleman1-0/+9
The ifidx provided by FW needs to be offsetted when receiving data packets. Cc: stable@vger.kernel.org # v3.17, v3.18 Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-04brcmfmac: Fix bitmap malloc bug in msgbuf.Hante Meuleman1-0/+1
Cc: stable@vger.kernel.org # v3.17, v3.18 Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-nextJohn W. Linville2-6/+4
Johannes Berg <johannes@sipsolutions.net> says: "This time I have Felix's no-status rate control work, which will allow drivers to work better with rate control even if they don't have perfect status reporting. In addition to this, a small hwsim fix from Patrik, one of the regulatory patches from Arik, and a number of cleanups and fixes I did myself. Of note is a patch where I disable CFG80211_WEXT so that compatibility is no longer selectable - this is intended as a wake-up call for anyone who's still using it, and is still easily worked around (it's a one-line patch) before we fully remove the code as well in the future." Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-02Merge tag 'iwlwifi-next-for-john-2014-12-02' of ↵John W. Linville26-471/+1258
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next "Grumbach, Emmanuel" <emmanuel.grumbach@intel.com> says: "I deprecate here -8.ucode since -9 has been published long ago. Along with that I have a new activity, we have now better infrastructure for firmware debugging. This will allow to have configurable probes insides the firmware. Luca continues his work on NetDetect, this feature is now complete. All the rest is minor fixes here and there." Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-02iwlwifi: mvm: Ability to work with packed usniffer imageEran Harary4-1/+37
The new ucode package format holds also the usniffer images (in addition to the operational images and the TLVs). The driver can load the usniffer image if debug configuration tells it to. Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-02iwlwifi: pcie: support more monitor types dumpingLiad Kaufman1-23/+79
Until this patch, dumping the monitor data could be done only for PCIe external (DRAM) mode in 7000 HW family. This patch allows to pull the monitor data also on other families, and also to pull the monitor data if an internal buffer is used. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-02iwlwifi: pcie: config regs according to fw tlvLiad Kaufman3-0/+71
Sometimes there is a need to configure some registers for setting some FW properties, such as the FW monitor mode (internal/external). This patch supports setting this for PCIe mode. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>