summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2023-09-23Fix nomenclature for USB and PCI wireless devicesAlan Stern20-32/+32
[ Upstream commit 5d7cf67f72ae34d38e090bdfa673da4aefe4048e ] A mouse that uses a USB connection is called a "USB mouse" device (or "USB mouse" for short), not a "mouse USB" device. By analogy, a WiFi adapter that connects to the host computer via USB is a "USB wireless" device, not a "wireless USB" device. (The latter term more properly refers to a defunct Wireless USB specification, which described a technology for sending USB protocol messages over an ultra wideband radio link.) Similarly for a WiFi adapter card that plugs into a PCIe slot: It is a "PCIe wireless" device, not a "wireless PCIe" device. Rephrase the text in the kernel source where the word ordering is wrong. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/57da7c80-0e48-41b5-8427-884a02648f55@rowland.harvard.edu Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23wifi: ath12k: add check max message length while scanning with extraieWen Gong1-7/+13
[ Upstream commit 2f5124e86ae74b7ba24c9ae2644107b750cbf38f ] Currently the extraie length is directly used to allocate skb buffer. When the length of skb is greater than the max message length which firmware supports, error will happen in firmware side. Hence add check for the skb length and drop extraie when overflow and print a message. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230809081657.13858-1-quic_wgong@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23wifi: ath12k: Fix memory leak in rx_desc and tx_descRajat Soni2-1/+31
[ Upstream commit afb522b36e76acaa9f8fc06d0a9742d841c47c16 ] Currently when ath12k_dp_cc_desc_init() is called we allocate memory to rx_descs and tx_descs. In ath12k_dp_cc_cleanup(), during descriptor cleanup rx_descs and tx_descs memory is not freed. This is cause of memory leak. These allocated memory should be freed in ath12k_dp_cc_cleanup. In ath12k_dp_cc_desc_init(), we can save base address of rx_descs and tx_descs. In ath12k_dp_cc_cleanup(), we can free rx_descs and tx_descs memory using their base address. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Rajat Soni <quic_rajson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230718053510.30894-1-quic_rajson@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23Revert "wifi: mac80211_hwsim: check the return value of nla_put_u32"Johannes Berg1-3/+2
[ Upstream commit 1b78dd34560e9962f8e917fe4adde6f2ab0eb89f ] This reverts commit b970ac68e0c4 ("wifi: mac80211_hwsim: check the return value of nla_put_u32") since it introduced a memory leak in the error path, which seems worse than sending an incomplete skb, and the put can't fail anyway since the SKB was just allocated. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23wifi: mac80211_hwsim: drop short framesJohannes Berg1-3/+4
[ Upstream commit fba360a047d5eeeb9d4b7c3a9b1c8308980ce9a6 ] While technically some control frames like ACK are shorter and end after Address 1, such frames shouldn't be forwarded through wmediumd or similar userspace, so require the full 3-address header to avoid accessing invalid memory if shorter frames are passed in. Reported-by: syzbot+b2645b5bf1512b81fa22@syzkaller.appspotmail.com Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23wifi: iwlwifi: pcie: avoid a warning in case prepare card failedAvraham Stern1-10/+1
[ Upstream commit 057381ddac0593c6e4ca8f58732830d8542b9c4e ] In case CSME holds the NIC and SAP connection is already established, iwl_pcie_prepare_card_hw() during iwl_pci_probe() will fail (which is fine since CSME will release the nic later when asked with a SAP message). In this case tring to grab nic access to read the crf ids will fail with a warning. Avoid the warning by only trying to read the crf ids in case prepare card succeeded. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230822103048.9b026fa7b97e.I12bea7e6eef54eeeaf916b68d71583e92ff310fd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23wifi: ath12k: avoid array overflow of hw mode for preferred_hw_modeWen Gong1-0/+4
[ Upstream commit 1e9b1363e2de1552ee4e3d74ac8bb43a194f1cb4 ] Currently ath12k define WMI_HOST_HW_MODE_DBS_OR_SBS=5 as max hw mode for enum wmi_host_hw_mode_config_type, it is also same for the array ath12k_hw_mode_pri_map. When tested with new version firmware/board data which support new hw mode eMLSR mode with hw mode value 8, it leads overflow usage for array ath12k_hw_mode_pri_map in function ath12k_wmi_hw_mode_caps(), and then lead preferred_hw_mode changed to 8, and finally function ath12k_pull_mac_phy_cap_svc_ready_ext() select the capability of hw mode 8, but the capability of eMLSR mode report from firmware does not support 2.4 GHz band for WCN7850, so finally 2.4 GHz band is disabled. Skip the hw mode which exceeds WMI_HOST_HW_MODE_MAX in function ath12k_wmi_hw_mode_caps() helps to avoid array overflow, then the 2.4 GHz band will not be disabled. This is to keep compatibility with newer version firmware/board data files, this change is still needed after ath12k add eMLSR hw mode 8 in array ath12k_hw_mode_pri_map and enum wmi_host_hw_mode_config_type, because more hw mode maybe added in next firmware/board data version e.g hw mode 9, then it will also lead new array overflow without this change. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230714072405.28705-1-quic_wgong@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23wifi: ath12k: Fix a NULL pointer dereference in ath12k_mac_op_hw_scan()Wen Gong1-2/+5
[ Upstream commit 8ad314da54c6dd223a6b6cc85019160aa842f659 ] In ath12k_mac_op_hw_scan(), the return value of kzalloc() is directly used in memcpy(), which may lead to a NULL pointer dereference on failure of kzalloc(). Fix this bug by adding a check of arg.extraie.ptr. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230726092625.3350-1-quic_wgong@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23wifi: wil6210: fix fortify warningsDmitry Antipov4-6/+10
[ Upstream commit 1ad8237e971630c66a1a6194491e0837b64d00e0 ] When compiling with gcc 13.1 and CONFIG_FORTIFY_SOURCE=y, I've noticed the following: In function ‘fortify_memcpy_chk’, inlined from ‘wil_rx_crypto_check_edma’ at drivers/net/wireless/ath/wil6210/txrx_edma.c:566:2: ./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning] 529 | __read_overflow2_field(q_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ where the compiler complains on: const u8 *pn; ... pn = (u8 *)&st->ext.pn_15_0; ... memcpy(cc->pn, pn, IEEE80211_GCMP_PN_LEN); and: In function ‘fortify_memcpy_chk’, inlined from ‘wil_rx_crypto_check’ at drivers/net/wireless/ath/wil6210/txrx.c:684:2: ./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning] 529 | __read_overflow2_field(q_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ where the compiler complains on: const u8 *pn = (u8 *)&d->mac.pn_15_0; ... memcpy(cc->pn, pn, IEEE80211_GCMP_PN_LEN); In both cases, the fortification logic interprets 'memcpy()' as 6-byte overread of 2-byte field 'pn_15_0' of 'struct wil_rx_status_extension' and 'pn_15_0' of 'struct vring_rx_mac', respectively. To silence these warnings, last two fields of the aforementioned structures are grouped using 'struct_group_attr(pn, __packed' quirk. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230621093711.80118-1-dmantipov@yandex.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23mt76: mt7921: don't assume adequate headroom for SDIO headersMatt Whitlock1-0/+4
[ Upstream commit 98c4d0abf5c478db1ad126ff0c187dbb84c0803c ] mt7921_usb_sdio_tx_prepare_skb() calls mt7921_usb_sdio_write_txwi() and mt7921_skb_add_usb_sdio_hdr(), both of which blindly assume that adequate headroom will be available in the passed skb. This assumption typically is satisfied when the skb was allocated in the net core for transmission via the mt7921 netdev (although even that is only an optimization and is not strictly guaranteed), but the assumption is sometimes not satisfied when the skb originated in the receive path of another netdev and was passed through to the mt7921, such as by the bridge layer. Blindly prepending bytes to an skb is always wrong. This commit introduces a call to skb_cow_head() before the call to mt7921_usb_sdio_write_txwi() in mt7921_usb_sdio_tx_prepare_skb() to ensure that at least MT_SDIO_TXD_SIZE + MT_SDIO_HDR_SIZE bytes can be pushed onto the skb. Without this fix, I can trivially cause kernel panics by bridging an MT7921AU-based USB 802.11ax interface with an Ethernet interface on an Intel Atom-based x86 system using its onboard RTL8169 PCI Ethernet adapter and also on an ARM-based Raspberry Pi 1 using its onboard SMSC9512 USB Ethernet adapter. Note that the panics do not occur in every system configuration, as they occur only if the receiving netdev leaves less headroom in its received skbs than the mt7921 needs for its SDIO headers. Here is an example stack trace of this panic on Raspberry Pi OS Lite 2023-02-21 running kernel 6.1.24+ [1]: skb_panic from skb_push+0x44/0x48 skb_push from mt7921_usb_sdio_tx_prepare_skb+0xd4/0x190 [mt7921_common] mt7921_usb_sdio_tx_prepare_skb [mt7921_common] from mt76u_tx_queue_skb+0x94/0x1d0 [mt76_usb] mt76u_tx_queue_skb [mt76_usb] from __mt76_tx_queue_skb+0x4c/0xc8 [mt76] __mt76_tx_queue_skb [mt76] from mt76_txq_schedule.part.0+0x13c/0x398 [mt76] mt76_txq_schedule.part.0 [mt76] from mt76_txq_schedule_all+0x24/0x30 [mt76] mt76_txq_schedule_all [mt76] from mt7921_tx_worker+0x58/0xf4 [mt7921_common] mt7921_tx_worker [mt7921_common] from __mt76_worker_fn+0x9c/0xec [mt76] __mt76_worker_fn [mt76] from kthread+0xbc/0xe0 kthread from ret_from_fork+0x14/0x34 After this fix, bridging the mt7921 interface works fine on both of my previously problematic systems. [1] https://github.com/raspberrypi/firmware/tree/5c276f55a4b21345cd4d6200a504ee991851ff7a Link: https://github.com/openwrt/openwrt/issues/11796 Signed-off-by: Matt Whitlock <kernel@mattwhitlock.name> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23wifi: mwifiex: fix fortify warningDmitry Antipov1-3/+6
[ Upstream commit dcce94b80a954a8968ff29fafcfb066d6197fa9a ] When compiling with gcc 13.1 and CONFIG_FORTIFY_SOURCE=y, I've noticed the following: In function ‘fortify_memcpy_chk’, inlined from ‘mwifiex_construct_tdls_action_frame’ at drivers/net/wireless/marvell/mwifiex/tdls.c:765:3, inlined from ‘mwifiex_send_tdls_action_frame’ at drivers/net/wireless/marvell/mwifiex/tdls.c:856:6: ./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning] 529 | __read_overflow2_field(q_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The compiler actually complains on: memmove(pos + ETH_ALEN, &mgmt->u.action.category, sizeof(mgmt->u.action.u.tdls_discover_resp)); and it happens because the fortification logic interprets this as an attempt to overread 1-byte 'u.action.category' member of 'struct ieee80211_mgmt'. To silence this warning, it's enough to pass an address of 'u.action' itself instead of an address of its first member. This also fixes an improper usage of 'sizeof()'. Since 'skb' is extended with 'sizeof(mgmt->u.action.u.tdls_discover_resp) + 1' bytes (where 1 is actually 'sizeof(mgmt->u.action.category)'), I assume that the same number of bytes should be copied. Suggested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230629085115.180499-2-dmantipov@yandex.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23wifi: rtw88: delete timer and free skb queue when unloadingDmitry Antipov1-1/+3
[ Upstream commit 634fcbcaa4062db39aeb5ac6ed1bc1feb8dd5216 ] Fix possible crash and memory leak on driver unload by deleting TX purge timer and freeing C2H queue in 'rtw_core_deinit()', shrink critical section in the latter by freeing COEX queue out of TX report lock scope. Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230628072327.167196-1-dmantipov@yandex.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23wifi: ath9k: fix printk specifierDongliang Mu2-4/+4
[ Upstream commit 061115fbfb2ce5870c9a004d68dc63138c07c782 ] Smatch reports: ath_pci_probe() warn: argument 4 to %lx specifier is cast from pointer ath_ahb_probe() warn: argument 4 to %lx specifier is cast from pointer Fix it by modifying %lx to %p in the printk format string. Note that with this change, the pointer address will be printed as a hashed value by default. This is appropriate because the kernel should not leak kernel pointers to user space in an informational message. If someone wants to see the real address for debugging purposes, this can be achieved with the no_hash_pointers kernel option. Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230723040403.296723-1-dzm91@hust.edu.cn Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23wifi: ath9k: fix fortify warningsDmitry Antipov2-4/+6
[ Upstream commit 810e41cebb6c6e394f2068f839e1a3fc745a5dcc ] When compiling with gcc 13.1 and CONFIG_FORTIFY_SOURCE=y, I've noticed the following: In function ‘fortify_memcpy_chk’, inlined from ‘ath_tx_complete_aggr’ at drivers/net/wireless/ath/ath9k/xmit.c:556:4, inlined from ‘ath_tx_process_buffer’ at drivers/net/wireless/ath/ath9k/xmit.c:773:3: ./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning] 529 | __read_overflow2_field(q_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function ‘fortify_memcpy_chk’, inlined from ‘ath_tx_count_frames’ at drivers/net/wireless/ath/ath9k/xmit.c:473:3, inlined from ‘ath_tx_complete_aggr’ at drivers/net/wireless/ath/ath9k/xmit.c:572:2, inlined from ‘ath_tx_process_buffer’ at drivers/net/wireless/ath/ath9k/xmit.c:773:3: ./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning] 529 | __read_overflow2_field(q_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In both cases, the compiler complains on: memcpy(ba, &ts->ba_low, WME_BA_BMP_SIZE >> 3); which is the legal way to copy both 'ba_low' and following 'ba_high' members of 'struct ath_tx_status' at once (that is, issue one 8-byte 'memcpy()' for two 4-byte fields). Since the fortification logic seems interprets this trick as an attempt to overread 4-byte 'ba_low', silence relevant warnings by using the convenient 'struct_group()' quirk. Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230620080855.396851-2-dmantipov@yandex.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: ath10k: Use RMW accessors for changing LNKCTLIlpo Järvinen1-4/+5
[ Upstream commit f139492a09f15254fa261245cdbd65555cdf39e3 ] Don't assume that only the driver would be accessing LNKCTL. ASPM policy changes can trigger write to LNKCTL outside of driver's control. Use RMW capability accessors which does proper locking to avoid losing concurrent updates to the register value. On restore, clear the ASPMC field properly. Suggested-by: Lukas Wunner <lukas@wunner.de> Fixes: 76d870ed09ab ("ath10k: enable ASPM") Link: https://lore.kernel.org/r/20230717120503.15276-11-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Kalle Valo <kvalo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: ath12k: Use RMW accessors for changing LNKCTLIlpo Järvinen1-4/+6
[ Upstream commit f5a7ac118faf6d4f794975947b3300717eae8fc5 ] Don't assume that only the driver would be accessing LNKCTL. ASPM policy changes can trigger write to LNKCTL outside of driver's control. Use RMW capability accessors which do proper locking to avoid losing concurrent updates to the register value. On restore, clear the ASPMC field properly. Suggested-by: Lukas Wunner <lukas@wunner.de> Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Link: https://lore.kernel.org/r/20230717120503.15276-10-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Kalle Valo <kvalo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: ath11k: Use RMW accessors for changing LNKCTLIlpo Järvinen1-4/+6
[ Upstream commit 6c1b6bdb34aaf8f94f65a9cae1d63490320c11bc ] Don't assume that only the driver would be accessing LNKCTL. ASPM policy changes can trigger write to LNKCTL outside of driver's control. Use RMW capability accessors which do proper locking to avoid losing concurrent updates to the register value. On restore, clear the ASPMC field properly. Suggested-by: Lukas Wunner <lukas@wunner.de> Fixes: e9603f4bdcc0 ("ath11k: pci: disable ASPM L0sLs before downloading firmware") Link: https://lore.kernel.org/r/20230717120503.15276-9-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Kalle Valo <kvalo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: ath9k: use IS_ERR() with debugfs_create_dir()Wang Ming1-1/+1
[ Upstream commit 1e4134610d93271535ecf900a676e1f094e9944c ] The debugfs_create_dir() function returns error pointers, it never returns NULL. Most incorrect error checks were fixed, but the one in ath9k_htc_init_debug() was forgotten. Fix the remaining error check. Fixes: e5facc75fa91 ("ath9k_htc: Cleanup HTC debugfs") Signed-off-by: Wang Ming <machel@vivo.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230713030358.12379-1-machel@vivo.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mwifiex: avoid possible NULL skb pointer dereferenceDmitry Antipov1-1/+9
[ Upstream commit 35a7a1ce7c7d61664ee54f5239a1f120ab95a87e ] In 'mwifiex_handle_uap_rx_forward()', always check the value returned by 'skb_copy()' to avoid potential NULL pointer dereference in 'mwifiex_uap_queue_bridged_pkt()', and drop original skb in case of copying failure. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 838e4f449297 ("mwifiex: improve uAP RX handling") Acked-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230814095041.16416-1-dmantipov@yandex.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: ath9k: protect WMI command response buffer replacement with a lockFedor Pchelkin1-6/+8
[ Upstream commit 454994cfa9e4c18b6df9f78b60db8eadc20a6c25 ] If ath9k_wmi_cmd() has exited with a timeout, it is possible that during next ath9k_wmi_cmd() call the wmi_rsp callback for previous wmi command writes to new wmi->cmd_rsp_buf and makes a completion. This results in an invalid ath9k_wmi_cmd() return value. Move the replacement of WMI command response buffer and length under wmi_lock. Note that last_seq_id value is updated there, too. Thus, the buffer cannot be written to by a belated wmi_rsp callback because that path is properly rejected by the last_seq_id check. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230425192607.18015-2-pchelkin@ispras.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: ath9k: fix races between ath9k_wmi_cmd and ath9k_wmi_ctrl_rxFedor Pchelkin1-2/+4
[ Upstream commit b674fb513e2e7a514fcde287c0f73915d393fdb6 ] Currently, the synchronization between ath9k_wmi_cmd() and ath9k_wmi_ctrl_rx() is exposed to a race condition which, although being rather unlikely, can lead to invalid behaviour of ath9k_wmi_cmd(). Consider the following scenario: CPU0 CPU1 ath9k_wmi_cmd(...) mutex_lock(&wmi->op_mutex) ath9k_wmi_cmd_issue(...) wait_for_completion_timeout(...) --- timeout --- /* the callback is being processed * before last_seq_id became zero */ ath9k_wmi_ctrl_rx(...) spin_lock_irqsave(...) /* wmi->last_seq_id check here * doesn't detect timeout yet */ spin_unlock_irqrestore(...) /* last_seq_id is zeroed to * indicate there was a timeout */ wmi->last_seq_id = 0 mutex_unlock(&wmi->op_mutex) return -ETIMEDOUT ath9k_wmi_cmd(...) mutex_lock(&wmi->op_mutex) /* the buffer is replaced with * another one */ wmi->cmd_rsp_buf = rsp_buf wmi->cmd_rsp_len = rsp_len ath9k_wmi_cmd_issue(...) spin_lock_irqsave(...) spin_unlock_irqrestore(...) wait_for_completion_timeout(...) /* the continuation of the * callback left after the first * ath9k_wmi_cmd call */ ath9k_wmi_rsp_callback(...) /* copying data designated * to already timeouted * WMI command into an * inappropriate wmi_cmd_buf */ memcpy(...) complete(&wmi->cmd_wait) /* awakened by the bogus callback * => invalid return result */ mutex_unlock(&wmi->op_mutex) return 0 To fix this, update last_seq_id on timeout path inside ath9k_wmi_cmd() under the wmi_lock. Move ath9k_wmi_rsp_callback() under wmi_lock inside ath9k_wmi_ctrl_rx() so that the wmi->cmd_wait can be completed only for initially designated wmi_cmd call, otherwise the path would be rejected with last_seq_id check. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230425192607.18015-1-pchelkin@ispras.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: rtw89: 8852b: rfk: fine tune IQK parameters to improve performance on ↵Ping-Ke Shih1-2/+2
2GHz band [ Upstream commit b3bfc4fb1edc8136396ece2d7204c2ee5cae188d ] A few samples get bad performance on 2GHz band, so use proper IQK command code and select another group to have wider range of calibration value. Fixes: f2abe804e823 ("wifi: rtw89: 8852b: rfk: add IQK") Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230803110150.8457-1-pkshih@realtek.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mwifiex: Fix missed return in oob checks failed pathPolaris Pi2-0/+2
[ Upstream commit 2785851c627f2db05f9271f7f63661b5dbd95c4c ] Add missed return in mwifiex_uap_queue_bridged_pkt() and mwifiex_process_rx_packet(). Fixes: 119585281617 ("wifi: mwifiex: Fix OOB and integer underflow when rx packets") Signed-off-by: Polaris Pi <pinkperfect2021@gmail.com> Reported-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230810083911.3725248-1-pinkperfect2021@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mwifiex: fix memory leak in mwifiex_histogram_read()Dmitry Antipov1-2/+7
[ Upstream commit 9c8fd72a5c2a031cbc680a2990107ecd958ffcdb ] Always free the zeroed page on return from 'mwifiex_histogram_read()'. Fixes: cbf6e05527a7 ("mwifiex: add rx histogram statistics support") Acked-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230802160726.85545-1-dmantipov@yandex.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: ath12k: fix memcpy array overflow in ath12k_peer_assoc_h_he()Arnd Bergmann1-2/+2
[ Upstream commit 603cf6c2fcdcbc38f1daa316794e7268852677a7 ] Two memory copies in this function copy from a short array into a longer one, using the wrong size, which leads to an out-of-bounds access: include/linux/fortify-string.h:592:4: error: call to '__read_overflow2_field' declared with 'warning' attribute: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror,-Wattribute-warning] __read_overflow2_field(q_size_field, size); ^ include/linux/fortify-string.h:592:4: error: call to '__read_overflow2_field' declared with 'warning' attribute: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror,-Wattribute-warning] 2 errors generated. Fixes: d889913205cf7 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230703123737.3420464-1-arnd@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: ath11k: fix band selection for ppdu received in channel 177 of 5 GHzAditya Kumar Singh1-1/+1
[ Upstream commit 72c8caf904aed2caed5d6e75233294b6159ddb5d ] 5 GHz band channel 177 support was added with the commit e5e94d10c856 ("wifi: ath11k: add channel 177 into 5 GHz channel list"). However, during processing for the received ppdu in ath11k_dp_rx_h_ppdu(), channel number is checked only till 173. This leads to driver code checking for channel and then fetching the band from it which is extra effort since firmware has already given the channel number in the metadata. Fix this issue by checking the channel number till 177 since we support it now. Found via code review. Compile tested only. Fixes: e5e94d10c856 ("wifi: ath11k: add channel 177 into 5 GHz channel list") Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230726044624.20507-1-quic_adisi@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mwifiex: fix error recovery in PCIE buffer descriptor managementDmitry Antipov1-8/+17
[ Upstream commit 288c63d5cb4667a51a04668b3e2bb0ea499bc5f4 ] Add missing 'kfree_skb()' in 'mwifiex_init_rxq_ring()' and never do 'kfree(card->rxbd_ring_vbase)' because this area is DMAed and should be released with 'dma_free_coherent()'. The latter is performed in 'mwifiex_pcie_delete_rxbd_ring()', which is now called to recover from possible errors in 'mwifiex_pcie_create_rxbd_ring()'. Likewise for 'mwifiex_pcie_init_evt_ring()', 'kfree(card->evtbd_ring_vbase)' 'mwifiex_pcie_delete_evtbd_ring()' and 'mwifiex_pcie_create_rxbd_ring()'. Fixes: d930faee141b ("mwifiex: add support for Marvell pcie8766 chipset") Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230731074334.56463-1-dmantipov@yandex.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mwifiex: Fix OOB and integer underflow when rx packetsPolaris Pi3-4/+36
[ Upstream commit 11958528161731c58e105b501ed60b83a91ea941 ] Make sure mwifiex_process_mgmt_packet, mwifiex_process_sta_rx_packet and mwifiex_process_uap_rx_packet, mwifiex_uap_queue_bridged_pkt and mwifiex_process_rx_packet not out-of-bounds access the skb->data buffer. Fixes: 2dbaf751b1de ("mwifiex: report received management frames to cfg80211") Signed-off-by: Polaris Pi <pinkperfect2021@gmail.com> Reviewed-by: Matthew Wang <matthewmwang@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230723070741.1544662-1-pinkperfect2021@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: rtw89: Fix loading of compressed firmwareLarry Finger1-24/+3
[ Upstream commit 942999c48cb382feb53c6da7679a994c97963836 ] When using compressed firmware, the early firmware load feature will fail. In most cases, the only downside is that if a device has more than one firmware version available, only the last one listed will be loaded. In at least two cases, there is no firmware loaded, and the device fails initialization. See https://github.com/lwfinger/rtw89/issues/259 and https://bugzilla.opensuse.org/show_bug.cgi?id=1212808 for examples of the failure. When firmware_class.dyndbg=+p" added to the kernel boot parameters, the following is found: finger@localhost:~/rtw89>sudo dmesg -t | grep rtw89 firmware_class: __allocate_fw_priv: fw-rtw89/rtw8852b_fw-1.bin fw_priv=00000000638862fb rtw89_8852be 0000:02:00.0: loading /lib/firmware/updates/5.14.21-150500.53-default/rtw89/rtw8852b_fw-1.bin failed for no such file or directory. rtw89_8852be 0000:02:00.0: loading /lib/firmware/updates/rtw89/rtw8852b_fw-1.bin failed for no such file or directory. rtw89_8852be 0000:02:00.0: loading /lib/firmware/5.14.21-150500.53-default/rtw89/rtw8852b_fw-1.bin failed for no such file or directory. rtw89_8852be 0000:02:00.0: loading /lib/firmware/rtw89/rtw8852b_fw-1.bin failed for no such file or directory. rtw89_8852be 0000:02:00.0: Direct firmware load for rtw89/rtw8852b_fw-1.bin failed with error -2 firmware_class: __free_fw_priv: fw-rtw89/rtw8852b_fw-1.bin fw_priv=00000000638862fb data=00000000307c30c7 size=0 firmware_class: __allocate_fw_priv: fw-rtw89/rtw8852b_fw.bin fw_priv=00000000638862fb rtw89_8852be 0000:02:00.0: loading /lib/firmware/updates/5.14.21-150500.53-default/rtw89/rtw8852b_fw.bin failed for no such file or directory. rtw89_8852be 0000:02:00.0: loading /lib/firmware/updates/rtw89/rtw8852b_fw.bin failed for no such file or directory. rtw89_8852be 0000:02:00.0: loading /lib/firmware/5.14.21-150500.53-default/rtw89/rtw8852b_fw.bin failed for no such file or directory. rtw89_8852be 0000:02:00.0: loading /lib/firmware/rtw89/rtw8852b_fw.bin failed for no such file or directory. rtw89_8852be 0000:02:00.0: Direct firmware load for rtw89/rtw8852b_fw.bin failed with error -2 firmware_class: __free_fw_priv: fw-rtw89/rtw8852b_fw.bin fw_priv=00000000638862fb data=00000000307c30c7 size=0 rtw89_8852be 0000:02:00.0: failed to early request firmware: -2 firmware_class: __allocate_fw_priv: fw-rtw89/rtw8852b_fw.bin fw_priv=00000000638862fb rtw89_8852be 0000:02:00.0: loading /lib/firmware/updates/5.14.21-150500.53-default/rtw89/rtw8852b_fw.bin failed for no such file or directory. rtw89_8852be 0000:02:00.0: loading /lib/firmware/updates/rtw89/rtw8852b_fw.bin failed for no such file or directory. rtw89_8852be 0000:02:00.0: loading /lib/firmware/5.14.21-150500.53-default/rtw89/rtw8852b_fw.bin failed for no such file or directory. rtw89_8852be 0000:02:00.0: loading /lib/firmware/rtw89/rtw8852b_fw.bin failed for no such file or directory. rtw89_8852be 0000:02:00.0: loading /lib/firmware/updates/5.14.21-150500.53-default/rtw89/rtw8852b_fw.bin.xz failed for no such file or directory. rtw89_8852be 0000:02:00.0: loading /lib/firmware/updates/rtw89/rtw8852b_fw.bin.xz failed for no such file or directory. rtw89_8852be 0000:02:00.0: loading /lib/firmware/5.14.21-150500.53-default/rtw89/rtw8852b_fw.bin.xz failed for no such file or directory. rtw89_8852be 0000:02:00.0: Loading firmware from /lib/firmware/rtw89/rtw8852b_fw.bin.xz rtw89_8852be 0000:02:00.0: f/w decompressing rtw89/rtw8852b_fw.bin firmware_class: fw_set_page_data: fw-rtw89/rtw8852b_fw.bin fw_priv=00000000638862fb data=000000004ed6c2f7 size=1035232 rtw89_8852be 0000:02:00.0: Firmware version 0.27.32.1, cmd version 0, type 1 rtw89_8852be 0000:02:00.0: Firmware version 0.27.32.1, cmd version 0, type 3 The key is that firmware version 0.27.32.1 is loaded. With this patch, the following is obtained: firmware_class: __free_fw_priv: fw-rtw89/rtw8852b_fw.bin fw_priv=000000000849addc data=00000000fd3cabe2 size=1035232 firmware_class: fw_name_devm_release: fw_name-rtw89/rtw8852b_fw.bin devm-000000002d8c3343 released firmware_class: __allocate_fw_priv: fw-rtw89/rtw8852b_fw-1.bin fw_priv=000000009e1a6364 rtw89_8852be 0000:02:00.0: loading /lib/firmware/updates/6.4.3-1-default/rtw89/rtw8852b_fw-1.bin failed for no such file or directory. rtw89_8852be 0000:02:00.0: loading /lib/firmware/updates/rtw89/rtw8852b_fw-1.bin failed for no such file or directory. rtw89_8852be 0000:02:00.0: loading /lib/firmware/6.4.3-1-default/rtw89/rtw8852b_fw-1.bin failed for no such file or directory. rtw89_8852be 0000:02:00.0: loading /lib/firmware/rtw89/rtw8852b_fw-1.bin failed for no such file or directory. rtw89_8852be 0000:02:00.0: loading /lib/firmware/updates/6.4.3-1-default/rtw89/rtw8852b_fw-1.bin.zst failed for no such file or directory. rtw89_8852be 0000:02:00.0: loading /lib/firmware/updates/rtw89/rtw8852b_fw-1.bin.zst failed for no such file or directory. rtw89_8852be 0000:02:00.0: loading /lib/firmware/6.4.3-1-default/rtw89/rtw8852b_fw-1.bin.zst failed for no such file or directory. rtw89_8852be 0000:02:00.0: loading /lib/firmware/rtw89/rtw8852b_fw-1.bin.zst failed for no such file or directory. rtw89_8852be 0000:02:00.0: loading /lib/firmware/updates/6.4.3-1-default/rtw89/rtw8852b_fw-1.bin.xz failed for no such file or directory. rtw89_8852be 0000:02:00.0: loading /lib/firmware/updates/rtw89/rtw8852b_fw-1.bin.xz failed for no such file or directory. rtw89_8852be 0000:02:00.0: loading /lib/firmware/6.4.3-1-default/rtw89/rtw8852b_fw-1.bin.xz failed for no such file or directory. rtw89_8852be 0000:02:00.0: Loading firmware from /lib/firmware/rtw89/rtw8852b_fw-1.bin.xz rtw89_8852be 0000:02:00.0: f/w decompressing rtw89/rtw8852b_fw-1.bin firmware_class: fw_set_page_data: fw-rtw89/rtw8852b_fw-1.bin fw_priv=000000009e1a6364 data=00000000fd3cabe2 size=1184992 rtw89_8852be 0000:02:00.0: Loaded FW: rtw89/rtw8852b_fw-1.bin, sha256: 8539efc75f513f4585cf0cd6e79e6507da47fce87225f2d0de391a03aefe9ac8 rtw89_8852be 0000:02:00.0: loaded firmware rtw89/rtw8852b_fw-1.bin rtw89_8852be 0000:02:00.0: Firmware version 0.29.29.1, cmd version 0, type 5 rtw89_8852be 0000:02:00.0: Firmware version 0.29.29.1, cmd version 0, type 3 Now, version 0.29.29.1 is loaded. Fixes: ffde7f3476a6 ("wifi: rtw89: add firmware format version to backward compatible with older drivers") Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230724183927.28553-1-Larry.Finger@lwfinger.net Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mt76: mt7915: fix power-limits while chan_switchRyder Lee1-1/+2
[ Upstream commit 6c0570bc21ec2073890aa252c8420ca7bec402e4 ] If user changes the channel without completely disabling the interface the txpower_sku values reported track the old channel the device was operating on. If user bounces the interface the correct power tables are applied. mt7915_sku_group_len array gets updated before the channel switch happens so it uses data from the old channel. Fixes: ecb187a74e18 ("mt76: mt7915: rework the flow of txpower setting") Fixes: f1d962369d56 ("mt76: mt7915: implement HE per-rate tx power support") Reported-By: Chad Monroe <chad.monroe@smartrg.com> Tested-by: Chad Monroe <chad.monroe@smartrg.com> Signed-off-by: Allen Ye <allen.ye@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mt76: mt7915: fix tlv length of mt7915_mcu_get_chan_mib_infoRyder Lee1-1/+1
[ Upstream commit 4f1875c288dfc1ccea81fc17fef1d30c9d8498b2 ] Correct per-device TLV lengths to avoid invalid operation in firmware. ( 64.040375:28:STATS-E)statsGetSingleHWCounter: MIB counter index = 65472 not supported. This happens on mt7916/mt7986. Fixes: b0bfa00595be ("wifi: mt76: mt7915: improve accuracy of time_busy calculation") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mt76: testmode: add nla_policy for MT76_TM_ATTR_TX_LENGTHLin Ma1-0/+1
[ Upstream commit 74f12d511625e603fac8c0c2b6872e687e56dd61 ] It seems that the nla_policy in mt76_tm_policy is missed for attribute MT76_TM_ATTR_TX_LENGTH. This patch adds the correct description to make sure the u32 val = nla_get_u32(tb[MT76_TM_ATTR_TX_LENGTH]); in function mt76_testmode_cmd() is safe and will not result in out-of-attribute read. Fixes: f0efa8621550 ("mt76: add API for testmode support") Signed-off-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mt76: mt7915: remove VHT160 capability on MT7915Felix Fietkau1-1/+0
[ Upstream commit 3ec5ac12ac8a4e6b1e085374325a5fbd1b650fd5 ] The IEEE80211_VHT_CAP_EXT_NSS_BW value already indicates support for half-NSS 160 MHz support, so it is wrong to also advertise full 160 MHz support. Fixes: c2f73eacee3b ("wifi: mt76: mt7915: add back 160MHz channel width support for MT7915") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mt76: mt7915: fix capabilities in non-AP modeFelix Fietkau3-12/+50
[ Upstream commit 02a894046d5ab7d0010f39ea54fde7e167919d04 ] Capabilities in vif->bss_conf are only initialized in AP mode. For other modes, they should be enabled by default, in order to avoid a mismatch. Fixes: 885f7af7e544 ("wifi: mt76: mt7915: remove mt7915_mcu_beacon_check_caps()") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mt76: mt7915: fix command timeout in AP stop periodRany Hany1-13/+50
[ Upstream commit c4f0755823045b66484fb53d686f85d3151400f4 ] Due to AP stop improperly, mt7915 driver would face random command timeout by chip fw problem. Migrate AP start/stop process to .start_ap/.stop_ap and congiure BSS network settings in both hooks. The new flow is shown below. * AP start .start_ap() configure BSS network resource set BSS to connected state .bss_info_changed() enable fw beacon offload * AP stop .bss_info_changed() disable fw beacon offload (skip this command) .stop_ap() set BSS to disconnected state (beacon offload disabled automatically) destroy BSS network resource Based on "mt76: mt7921: fix command timeout in AP stop period" Signed-off-by: Rany Hany <rany_hany@riseup.net> Signed-off-by: Felix Fietkau <nbd@nbd.name> Stable-dep-of: 02a894046d5a ("wifi: mt76: mt7915: fix capabilities in non-AP mode") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mt76: mt7996: fix WA event ring sizeStanleyYP Wang2-1/+2
[ Upstream commit 1634de418b3048c5f435b6ffd37f75943c554c04 ] Fix rx ring size of WA event to get rid of event loss and queue overflow problems. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mt76: mt7996: use correct phy for background radar eventStanleyYP Wang1-1/+5
[ Upstream commit 9ffe0d5690ed916e09baad2cc9ee7ec65b110038 ] If driver directly uses the band_idx reported from the radar event to access mt76_phy array, it will get the wrong phy for background radar. Fix this by adjusting the statement. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mt76: mt7996: fix bss wlan_idx when sending bss_info commandPeter Chiu1-2/+3
[ Upstream commit cc945b546227423488fe4be0ab92fd126b703246 ] The bmc_tx_wlan_idx should be the wlan_idx of the current bss rather than peer AP's wlan_idx, otherwise there will appear some frame decryption problems on station mode. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mt76: mt7921: fix non-PSC channel scan failMing Yen Hsieh1-1/+2
[ Upstream commit 0e5911bb7cc92c00dda9b4d635c1266b7ca915c6 ] Due to the scan command may only request legacy bands and PSC channel in 6GHz band, we are unable to scan the APs on non-PSC channel in this case. Enable WIPHY_FLAG_SPLIT_SCAN_6GHZ to support non-PSC channel (obtained during scan on legacy bands) in 6GHz scan request. Fixes: 50ac15a511e3 ("mt76: mt7921: add 6GHz support") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mt76: mt7915: rework tx bytes counting when WED is activePeter Chiu4-31/+16
[ Upstream commit f39d499345dddb8382986fd5a2a0e84a63b1a6d5 ] Concurrent binding/non-binding skbs could be handled anywhere which leads to mixed byte counting, so switch to use PPDU TxS reporting regardless Tx paths when WED is active. Fixes: 43eaa3689507 ("wifi: mt76: add PPDU based TxS support for WED device") Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mt76: mt7915: rework tx packets counting when WED is activePeter Chiu6-14/+79
[ Upstream commit 161a7528e4074d104305fc109c16134b4990070e ] PPDU TxS can only report MPDU count whereas mac80211 requires MSDU scale (NL80211_STA_INFO_TX_PACKETS), so switch to get MSDU counts from WA statistic. Note that mt7915 WA firmware only counts tx_packet for WED path, so driver needs to take care of host path additionally. Fixes: 43eaa3689507 ("wifi: mt76: add PPDU based TxS support for WED device") Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mt76: mt7915: fix background radar event being blockedStanleyYP Wang1-1/+1
[ Upstream commit 9a3994077d170ec9ac75e800932b5671d9940cd2 ] The background radar uses MT_RX_SEL2 as its band indication, so fix it. Fixes: 7a53eecd5c87 (wifi: mt76: mt7915: check the correctness of event data) Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mt76: mt7996: fix header translation logicRyder Lee1-4/+9
[ Upstream commit c55b4e788f1dd6ca89cc97cf291d2a03b0b96de1 ] When header translation failure is indicated, the hardware will insert an extra 2-byte field containing the data length after the protocol type field. This happens either when the LLC-SNAP pattern did not match, or if a VLAN header was detected. The previous commit accidentally breaks the logic, so reverts back. Fixes: 27db47ab1f47 (wifi: mt76: mt7996: enable mesh HW amsdu/de-amsdu support) Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: rtw89: debug: Fix error handling in rtw89_debug_priv_btc_manual_set()Zhang Shurong1-3/+5
[ Upstream commit 59b4cc439f184c5eaa34161ec67af1e16ffabed4 ] If there is a failure during kstrtobool_from_user() rtw89_debug_priv_btc_manual_set should return a negative error code instead of returning the count directly. Fix this bug by returning an error code instead of a count after a failed call of the function "kstrtobool_from_user". Moreover I omitted the label "out" with this source code correction. Fixes: e3ec7017f6a2 ("rtw89: add Realtek 802.11ax driver") Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/tencent_1C09B99BD7DA9CAD18B00C8F0F050F540607@qq.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-06wifi: ath11k: Cleanup mac80211 references on failure during tx_completeSven Eckelmann1-3/+3
commit 29d15589f084d71a4ea8c544039c5839db0236e2 upstream. When a function is using functions from mac80211 to free an skb then it should do it consistently and not switch to the generic dev_kfree_skb_any (or similar functions). Otherwise (like in the error handlers), mac80211 will will not be aware of the freed skb and thus not clean up related information in its internal data structures. Not doing so lead in the past to filled up structure which then prevented new clients to connect. Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Fixes: 6257c702264c ("wifi: ath11k: fix tx status reporting in encap offload mode") Cc: stable@vger.kernel.org Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230802-ath11k-ack_status_leak-v2-2-c0af729d6229@narfation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-06wifi: ath11k: Don't drop tx_status when peer cannot be foundSven Eckelmann1-2/+2
commit 400ece6c7f346b0a30867bd00b03b5b2563d4357 upstream. When a station idles for a long time, hostapd will try to send a QoS Null frame to the station as "poll". NL80211_CMD_PROBE_CLIENT is used for this purpose. And the skb will be added to ack_status_frame - waiting for a completion via ieee80211_report_ack_skb(). But when the peer was already removed before the tx_complete arrives, the peer will be missing. And when using dev_kfree_skb_any (instead of going through mac80211), the entry will stay inside ack_status_frames. This IDR will therefore run full after 8K request were generated for such clients. At this point, the access point will then just stall and not allow any new clients because idr_alloc() for ack_status_frame will fail. ieee80211_free_txskb() on the other hand will (when required) call ieee80211_report_ack_skb() and make sure that (when required) remove the entry from the ack_status_frame. Tested-on: IPQ6018 hw1.0 WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Fixes: 6257c702264c ("wifi: ath11k: fix tx status reporting in encap offload mode") Fixes: 94739d45c388 ("ath11k: switch to using ieee80211_tx_status_ext()") Cc: stable@vger.kernel.org Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230802-ath11k-ack_status_leak-v2-1-c0af729d6229@narfation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-06wifi: rtw88: usb: kill and free rx urbs on probe failureSascha Hauer1-1/+4
commit 290564367ab7fa7e2048bdc00d9c0ad016b41eea upstream. After rtw_usb_alloc_rx_bufs() has been called rx urbs have been allocated and must be freed in the error path. After rtw_usb_init_rx() has been called they are submitted, so they also must be killed. Add these forgotten steps to the probe error path. Besides the lost memory this also fixes a problem when the driver fails to download the firmware in rtw_chip_info_setup(). In this case it can happen that the completion of the rx urbs handler runs at a time when we already freed our data structures resulting in a kernel crash. Fixes: a82dfd33d123 ("wifi: rtw88: Add common USB chip support") Cc: stable@vger.kernel.org Reported-by: Ilgaz Öcal <ilgaz@ilgaz.gen.tr> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230823075021.588596-1-s.hauer@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-06wifi: mt76: mt7921: fix skb leak by txs missing in AMSDUDeren Wu1-2/+5
commit b642f4c5f3de0a8f47808d32b1ebd9c427a42a66 upstream. txs may be dropped if the frame is aggregated in AMSDU. When the problem shows up, some SKBs would be hold in driver to cause network stopped temporarily. Even if the problem can be recovered by txs timeout handling, mt7921 still need to disable txs in AMSDU to avoid this issue. Cc: stable@vger.kernel.org Fixes: 163f4d22c118 ("mt76: mt7921: add MAC support") Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-06wifi: mt76: mt7921: do not support one stream on secondary antenna onlyDeren Wu1-1/+1
commit d616d3680264beb9a9d2c4fc681064b06f447eeb upstream. mt7921 support following antenna combiantions only. * primary + secondary (2x2) * primary only (1x1) Since we cannot work on secondary antenna only, return error if the antenna bitmap is 0x2 in .set_antenna(). For example: iw phy0 set antenna 3 3 /* valid */ iw phy0 set antenna 1 1 /* valid */ iw phy0 set antenna 2 2 /* invalid */ Cc: stable@vger.kernel.org Fixes: e0f9fdda81bd ("mt76: mt7921: add ieee80211_ops") Suggested-by: Knox Chiou <knoxchiou@google.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-15wifi: iwlwifi: mvm: add dependency for PTP clockRandy Dunlap1-0/+1
When the code to use the PTP HW clock was added, it didn't update the Kconfig entry for the PTP dependency, leading to build errors, so update the Kconfig entry to depend on PTP_1588_CLOCK_OPTIONAL. aarch64-linux-ld: drivers/net/wireless/intel/iwlwifi/mvm/ptp.o: in function `iwl_mvm_ptp_init': drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:294: undefined reference to `ptp_clock_register' drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:294:(.text+0xce8): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_register' aarch64-linux-ld: drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:301: undefined reference to `ptp_clock_index' drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:301:(.text+0xd18): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_index' aarch64-linux-ld: drivers/net/wireless/intel/iwlwifi/mvm/ptp.o: in function `iwl_mvm_ptp_remove': drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:315: undefined reference to `ptp_clock_index' drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:315:(.text+0xe80): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_index' aarch64-linux-ld: drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:319: undefined reference to `ptp_clock_unregister' drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:319:(.text+0xeac): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_unregister' Fixes: 1595ecce1cf3 ("wifi: iwlwifi: mvm: add support for PTP HW clock (PHC)") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/all/202308110447.4QSJHmFH-lkp@intel.com/ Cc: Krishnanand Prabhu <krishnanand.prabhu@intel.com> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Gregory Greenman <gregory.greenman@intel.com> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230812052947.22913-1-rdunlap@infradead.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 18:50:10 +0300