summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2020-01-09ath9k_htc: Discard undersized packetsMasashi Honma1-4/+19
[ Upstream commit cd486e627e67ee9ab66914d36d3127ef057cc010 ] Sometimes the hardware will push small packets that trigger a WARN_ON in mac80211. Discard them early to avoid this issue. This patch ports 2 patches from ath9k to ath9k_htc. commit 3c0efb745a172bfe96459e20cbd37b0c945d5f8d "ath9k: discard undersized packets". commit df5c4150501ee7e86383be88f6490d970adcf157 "ath9k: correctly handle short radar pulses". [ 112.835889] ------------[ cut here ]------------ [ 112.835971] WARNING: CPU: 5 PID: 0 at net/mac80211/rx.c:804 ieee80211_rx_napi+0xaac/0xb40 [mac80211] [ 112.835973] Modules linked in: ath9k_htc ath9k_common ath9k_hw ath mac80211 cfg80211 libarc4 nouveau snd_hda_codec_hdmi intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_hda_codec video snd_hda_core ttm snd_hwdep drm_kms_helper snd_pcm crct10dif_pclmul snd_seq_midi drm snd_seq_midi_event crc32_pclmul snd_rawmidi ghash_clmulni_intel snd_seq aesni_intel aes_x86_64 crypto_simd cryptd snd_seq_device glue_helper snd_timer sch_fq_codel i2c_algo_bit fb_sys_fops snd input_leds syscopyarea sysfillrect sysimgblt intel_cstate mei_me intel_rapl_perf soundcore mxm_wmi lpc_ich mei kvm_intel kvm mac_hid irqbypass parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid hid raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear e1000e ahci libahci wmi [ 112.836022] CPU: 5 PID: 0 Comm: swapper/5 Not tainted 5.3.0-wt #1 [ 112.836023] Hardware name: MouseComputer Co.,Ltd. X99-S01/X99-S01, BIOS 1.0C-W7 04/01/2015 [ 112.836056] RIP: 0010:ieee80211_rx_napi+0xaac/0xb40 [mac80211] [ 112.836059] Code: 00 00 66 41 89 86 b0 00 00 00 e9 c8 fa ff ff 4c 89 b5 40 ff ff ff 49 89 c6 e9 c9 fa ff ff 48 c7 c7 e0 a2 a5 c0 e8 47 41 b0 e9 <0f> 0b 48 89 df e8 5a 94 2d ea e9 02 f9 ff ff 41 39 c1 44 89 85 60 [ 112.836060] RSP: 0018:ffffaa6180220da8 EFLAGS: 00010286 [ 112.836062] RAX: 0000000000000024 RBX: ffff909a20eeda00 RCX: 0000000000000000 [ 112.836064] RDX: 0000000000000000 RSI: ffff909a2f957448 RDI: ffff909a2f957448 [ 112.836065] RBP: ffffaa6180220e78 R08: 00000000000006e9 R09: 0000000000000004 [ 112.836066] R10: 000000000000000a R11: 0000000000000001 R12: 0000000000000000 [ 112.836068] R13: ffff909a261a47a0 R14: 0000000000000000 R15: 0000000000000004 [ 112.836070] FS: 0000000000000000(0000) GS:ffff909a2f940000(0000) knlGS:0000000000000000 [ 112.836071] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 112.836073] CR2: 00007f4e3ffffa08 CR3: 00000001afc0a006 CR4: 00000000001606e0 [ 112.836074] Call Trace: [ 112.836076] <IRQ> [ 112.836083] ? finish_td+0xb3/0xf0 [ 112.836092] ? ath9k_rx_prepare.isra.11+0x22f/0x2a0 [ath9k_htc] [ 112.836099] ath9k_rx_tasklet+0x10b/0x1d0 [ath9k_htc] [ 112.836105] tasklet_action_common.isra.22+0x63/0x110 [ 112.836108] tasklet_action+0x22/0x30 [ 112.836115] __do_softirq+0xe4/0x2da [ 112.836118] irq_exit+0xae/0xb0 [ 112.836121] do_IRQ+0x86/0xe0 [ 112.836125] common_interrupt+0xf/0xf [ 112.836126] </IRQ> [ 112.836130] RIP: 0010:cpuidle_enter_state+0xa9/0x440 [ 112.836133] Code: 3d bc 20 38 55 e8 f7 1d 84 ff 49 89 c7 0f 1f 44 00 00 31 ff e8 28 29 84 ff 80 7d d3 00 0f 85 e6 01 00 00 fb 66 0f 1f 44 00 00 <45> 85 ed 0f 89 ff 01 00 00 41 c7 44 24 10 00 00 00 00 48 83 c4 18 [ 112.836134] RSP: 0018:ffffaa61800e3e48 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde [ 112.836136] RAX: ffff909a2f96b340 RBX: ffffffffabb58200 RCX: 000000000000001f [ 112.836137] RDX: 0000001a458adc5d RSI: 0000000026c9b581 RDI: 0000000000000000 [ 112.836139] RBP: ffffaa61800e3e88 R08: 0000000000000002 R09: 000000000002abc0 [ 112.836140] R10: ffffaa61800e3e18 R11: 000000000000002d R12: ffffca617fb40b00 [ 112.836141] R13: 0000000000000002 R14: ffffffffabb582d8 R15: 0000001a458adc5d [ 112.836145] ? cpuidle_enter_state+0x98/0x440 [ 112.836149] ? menu_select+0x370/0x600 [ 112.836151] cpuidle_enter+0x2e/0x40 [ 112.836154] call_cpuidle+0x23/0x40 [ 112.836156] do_idle+0x204/0x280 [ 112.836159] cpu_startup_entry+0x1d/0x20 [ 112.836164] start_secondary+0x167/0x1c0 [ 112.836169] secondary_startup_64+0xa4/0xb0 [ 112.836173] ---[ end trace 9f4cd18479cc5ae5 ]--- Signed-off-by: Masashi Honma <masashi.honma@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-09ath9k_htc: Modify byte order for an error messageMasashi Honma1-1/+1
[ Upstream commit e01fddc19d215f6ad397894ec2a851d99bf154e2 ] rs_datalen is be16 so we need to convert it before printing. Signed-off-by: Masashi Honma <masashi.honma@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04Revert "iwlwifi: assign directly to iwl_trans->cfg in QuZ detection"Anders Kaseorg1-12/+12
commit db5cce1afc8d2475d2c1c37c2a8267dd0e151526 upstream. This reverts commit 968dcfb4905245dc64d65312c0d17692fa087b99. Both that commit and commit 809805a820c6445f7a701ded24fdc6bbc841d1e4 attempted to fix the same bug (dead assignments to the local variable cfg), but they did so in incompatible ways. When they were both merged, independently of each other, the combination actually caused the bug to reappear, leading to a firmware crash on boot for some cards. https://bugzilla.kernel.org/show_bug.cgi?id=205719 Signed-off-by: Anders Kaseorg <andersk@mit.edu> Acked-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-31iwlwifi: pcie: move power gating workaround earlier in the flowLuca Coelho2-25/+30
commit 0df36b90c47d93295b7e393da2d961b2f3b6cde4 upstream. We need to reset the NIC after setting the bits to enable power gating and that cannot be done too late in the flow otherwise it cleans other registers and things that were already configured, causing initialization to fail. In order to fix this, move the function to the common code in trans.c so it can be called directly from there at an earlier point, just after the reset we already do during initialization. Fixes: 9a47cb988338 ("iwlwifi: pcie: add workaround for power gating in integrated 22000") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205719 Cc: stable@ver.kernel.org # 5.4+ Reported-by: Anders Kaseorg <andersk@mit.edu> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-31ath10k: Revert "ath10k: add cleanup in ath10k_sta_state()"Bjorn Andersson1-5/+1
[ Upstream commit f4fe2e53349f1072d33c69f484dbf9d77bb8f45a ] This reverts commit 334f5b61a6f29834e881923b98d1e27e5ce9620d. This caused ath10k_snoc on Qualcomm MSM8998, SDM845 and QCS404 platforms to trigger an assert in the firmware: err_qdi.c:456:EF:wlan_process:1:cmnos_thread.c:3900:Asserted in wlan_vdev.c:_wlan_vdev_up:3219 Revert the offending commit for now. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31net: wireless: intel: iwlwifi: fix GRO_NORMAL packet stallingAlexander Lobakin1-2/+11
[ Upstream commit b167191e2a851cb2e4c6ef8b91c83ff73ef41872 ] Commit 6570bc79c0df ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()") has applied batched GRO_NORMAL packets processing to all napi_gro_receive() users, including mac80211-based drivers. However, this change has led to a regression in iwlwifi driver [1][2] as it is required for NAPI users to call napi_complete_done() or napi_complete() and the end of every polling iteration, whilst iwlwifi doesn't use NAPI scheduling at all and just calls napi_gro_flush(). In that particular case, packets which have not been already flushed from napi->rx_list stall in it until at least next Rx cycle. Fix this by adding a manual flushing of the list to iwlwifi driver right before napi_gro_flush() call to mimic napi_complete() logics. I prefer to open-code gro_normal_list() rather than exporting it for 2 reasons: * to prevent from using it and napi_gro_flush() in any new drivers, as it is the *really* bad way to use NAPI that should be avoided; * to keep gro_normal_list() static and don't lose any CC optimizations. I also don't add the "Fixes:" tag as the mentioned commit was only a trigger that only exposed an improper usage of NAPI in this particular driver. [1] https://lore.kernel.org/netdev/PSXP216MB04388962C411CD0B17A86F47804A0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM [2] https://bugzilla.kernel.org/show_bug.cgi?id=205647 Signed-off-by: Alexander Lobakin <alobakin@dlink.ru> Acked-by: Luca Coelho <luciano.coelho@intel.com> Reported-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Tested-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Reviewed-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31mt76: fix possible out-of-bound access in mt7615_fill_txs/mt7603_fill_txsLorenzo Bianconi2-2/+6
[ Upstream commit e8b970c8e367e85fab9b8ac4f36080e5d653c38e ] Fix possible out-of-bound access of status rates array in mt7615_fill_txs/mt7603_fill_txs routines Fixes: c5211e997eca ("mt76: mt7603: rework and fix tx status reporting") Fixes: 4af81f02b49c ("mt76: mt7615: sync with mt7603 rate control changes") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31iwlwifi: check kasprintf() return valueJohannes Berg2-0/+6
[ Upstream commit 5974fbb5e10b018fdbe3c3b81cb4cc54e1105ab9 ] kasprintf() can fail, we should check the return value. Fixes: 5ed540aecc2a ("iwlwifi: use mac80211 throughput trigger") Fixes: 8ca151b568b6 ("iwlwifi: add the MVM driver") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31brcmfmac: remove monitor interface when detachingRafał Miłecki1-0/+5
[ Upstream commit 4f61563da075bc8faefddfd5f8fc0cc14c49650a ] This fixes a minor WARNING in the cfg80211: [ 130.658034] ------------[ cut here ]------------ [ 130.662805] WARNING: CPU: 1 PID: 610 at net/wireless/core.c:954 wiphy_unregister+0xb4/0x198 [cfg80211] Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31iwlwifi: mvm: fix unaligned read of rx_pkt_statusWang Xuerui1-1/+2
[ Upstream commit c5aaa8be29b25dfe1731e9a8b19fd91b7b789ee3 ] This is present since the introduction of iwlmvm. Example stack trace on MIPS: [<ffffffffc0789328>] iwl_mvm_rx_rx_mpdu+0xa8/0xb88 [iwlmvm] [<ffffffffc0632b40>] iwl_pcie_rx_handle+0x420/0xc48 [iwlwifi] Tested with a Wireless AC 7265 for ~6 months, confirmed to fix the problem. No other unaligned accesses are spotted yet. Signed-off-by: Wang Xuerui <wangxuerui@qiniu.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31qtnfmac: fix using skb after freeSergey Matyukevich1-2/+4
[ Upstream commit 4a33f21cef84b1b933958c99ed5dac1726214b35 ] KASAN reported use-after-free error: [ 995.220767] BUG: KASAN: use-after-free in qtnf_cmd_send_with_reply+0x169/0x3e0 [qtnfmac] [ 995.221098] Read of size 2 at addr ffff888213d1ded0 by task kworker/1:1/71 The issue in qtnf_cmd_send_with_reply impacts all the commands that do not need response other then return code. For such commands, consume_skb is used for response skb and right after that return code in response skb is accessed. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31qtnfmac: fix invalid channel information outputSergey Matyukevich1-3/+4
[ Upstream commit 24227a9e956a7c9913a7e6e7199a9ae3f540fe88 ] Do not attempt to print frequency for an invalid channel provided by firmware. That channel may simply not exist. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31qtnfmac: fix debugfs support for multiple cardsSergey Matyukevich1-1/+5
[ Upstream commit dd4c2260dab04f5ae7bdb79b9470e7da56f48145 ] Fix merge artifact for commit 0b68fe10b8e8 ("qtnfmac: modify debugfs to support multiple cards") and finally add debugfs support for multiple qtnfmac wireless cards. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31ath10k: fix get invalid tx rate for Mesh metricMiaoqing Pan1-0/+2
[ Upstream commit 05a11003a56507023f18d3249a4d4d119c0a3e9c ] ath10k does not provide transmit rate info per MSDU in tx completion, mark that as -1 so mac80211 will ignore the rates. This fixes mac80211 update Mesh link metric with invalid transmit rate info. Tested HW: QCA9984 Tested FW: 10.4-3.9.0.2-00035 Signed-off-by: Hou Bao Hou <houbao@codeaurora.org> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31rtlwifi: fix memory leak in rtl92c_set_fw_rsvdpagepkt()Ping-Ke Shih1-0/+2
[ Upstream commit 5174f1e41074b5186608badc2e89441d021e8c08 ] This leak was found by testing the EDIMAX EW-7612 on Raspberry Pi 3B+ with Linux 5.4-rc5 (multi_v7_defconfig + rtlwifi + kmemleak) and noticed a single memory leak during probe: unreferenced object 0xec13ee40 (size 176): comm "kworker/u8:1", pid 36, jiffies 4294939321 (age 5580.790s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<fc1bbb3e>] __netdev_alloc_skb+0x9c/0x164 [<863dfa6e>] rtl92c_set_fw_rsvdpagepkt+0x254/0x340 [rtl8192c_common] [<9572be0d>] rtl92cu_set_hw_reg+0xf48/0xfa4 [rtl8192cu] [<116df4d8>] rtl_op_bss_info_changed+0x234/0x96c [rtlwifi] [<8933575f>] ieee80211_bss_info_change_notify+0xb8/0x264 [mac80211] [<d4061e86>] ieee80211_assoc_success+0x934/0x1798 [mac80211] [<e55adb56>] ieee80211_rx_mgmt_assoc_resp+0x174/0x314 [mac80211] [<5974629e>] ieee80211_sta_rx_queued_mgmt+0x3f4/0x7f0 [mac80211] [<d91091c6>] ieee80211_iface_work+0x208/0x318 [mac80211] [<ac5fcae4>] process_one_work+0x22c/0x564 [<f5e6d3b6>] worker_thread+0x44/0x5d8 [<82c7b073>] kthread+0x150/0x154 [<b43e1b7d>] ret_from_fork+0x14/0x2c [<794dff30>] 0x0 It is because 8192cu doesn't implement usb_cmd_send_packet(), and this patch just frees the skb within the function to resolve memleak problem by now. Since 8192cu doesn't turn on fwctrl_lps that needs to download command packet for firmware via the function, applying this patch doesn't affect driver behavior. Reported-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31rtl8xxxu: fix RTL8723BU connection failure issue after warm rebootChris Chiu3-0/+5
[ Upstream commit 0eeb91ade90ce06d2fa1e2fcb55e3316b64c203c ] The RTL8723BU has problems connecting to AP after each warm reboot. Sometimes it returns no scan result, and in most cases, it fails the authentication for unknown reason. However, it works totally fine after cold reboot. Compare the value of register SYS_CR and SYS_CLK_MAC_CLK_ENABLE for cold reboot and warm reboot, the registers imply that the MAC is already powered and thus some procedures are skipped during driver initialization. Double checked the vendor driver, it reads the SYS_CR and SYS_CLK_MAC_CLK_ENABLE also but doesn't skip any during initialization based on them. This commit only tells the RTL8723BU to do full initialization without checking MAC status. Signed-off-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31rtw88: coex: Set 4 slot mode for A2DPPing-Ke Shih1-9/+15
[ Upstream commit 12078aae453556a88fb46777b7cc5fc97f867b7c ] With shallow buffer size, certain BT devices have active A2DP flow control to fill buffer frequently. If the slot is not at BT side, data can't be sent successfully to BT devices, and will cause audio glitch. To resolve this issue, this commit splits TUs into 4-slots instead of 2-slot for all of the A2DP related coexistence strategies. That makes BT have higher opportunity to fill the A2DP buffer in time, and the audio quality could be more stable and smooth. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31ath10k: Correct error handling of dma_map_single()Bjorn Andersson1-1/+3
[ Upstream commit d43810b2c1808ac865aa1a2a2c291644bf95345c ] The return value of dma_map_single() should be checked for errors using dma_mapping_error() and the skb has been dequeued so it needs to be freed. This was found when enabling CONFIG_DMA_API_DEBUG and it warned about the missing dma_mapping_error() call. Fixes: 1807da49733e ("ath10k: wmi: add management tx by reference support over wmi") Reported-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31mwifiex: pcie: Fix memory leak in mwifiex_pcie_init_evt_ringNavid Emamdoost1-1/+4
[ Upstream commit d10dcb615c8e29d403a24d35f8310a7a53e3050c ] In mwifiex_pcie_init_evt_ring, a new skb is allocated which should be released if mwifiex_map_pci_memory() fails. The release for skb and card->evtbd_ring_vbase is added. Fixes: 0732484b47b5 ("mwifiex: separate ring initialization and ring creation routines") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Acked-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31rtw88: fix NSS of hw_capPing-Ke Shih1-1/+2
[ Upstream commit 4f5bb7ff8b8d4bafd91243fc969ed240e67aa1ca ] 8822C is a 2x2 11ac chip, and then NSS must be less or equal to 2. However, current nss of hw cap is 3, likes hw cap: hci=0x0f, bw=0x07, ptcl=0x03, ant_num=7, nss=3 This commit adds constraint to make sure NSS <= rf_path_num, and result looks like hw cap: hci=0x0f, bw=0x07, ptcl=0x03, ant_num=7, nss=2 Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31ath10k: fix offchannel tx failure when no ath10k_mac_tx_frm_has_freqBen Greear1-11/+11
[ Upstream commit cc6df017e55764ffef9819dd9554053182535ffd ] Offchannel management frames were failing: [18099.253732] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb cf0e3780 [18102.293686] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb cf0e3780 [18105.333653] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb cf0e3780 [18108.373712] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb cf0e3780 [18111.413687] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb cf0e36c0 [18114.453726] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb cf0e3f00 [18117.493773] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb cf0e36c0 [18120.533631] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb cf0e3f00 This bug appears to have been added between 4.0 (which works for us), and 4.4, which does not work. I think this is because the tx-offchannel logic gets in a loop when ath10k_mac_tx_frm_has_freq(ar) is false, so pkt is never actually sent to the firmware for transmit. This patch fixes the problem on 4.9 for me, and now HS20 clients can work again with my firmware. Antonio: tested with 10.4-3.5.3-00057 on QCA4019 and QCA9888 Signed-off-by: Ben Greear <greearb@candelatech.com> Tested-by: Antonio Quartulli <antonio.quartulli@kaiwoo.ai> [kvalo@codeaurora.org: improve commit log, remove unneeded parenthesis] Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31ath10k: fix backtrace on coredumpAnilkumar Kolli1-3/+8
[ Upstream commit d98ddae85a4a57124f87960047b1b6419312147f ] In a multiradio board with one QCA9984 and one AR9987 after enabling the crashdump with module parameter coredump_mask=7, below backtrace is seen. vmalloc: allocation failure: 0 bytes kworker/u4:0: page allocation failure: order:0, mode:0x80d2 CPU: 0 PID: 6 Comm: kworker/u4:0 Not tainted 3.14.77 #130 Workqueue: ath10k_wq ath10k_core_register_work [ath10k_core] (unwind_backtrace) from [<c021abf8>] (show_stack+0x10/0x14) (dump_stack+0x80/0xa0) (warn_alloc_failed+0xd0/0xfc) (__vmalloc_node_range+0x1b4/0x1d8) (__vmalloc_node+0x34/0x40) (vzalloc+0x24/0x30) (ath10k_coredump_register+0x6c/0x88 [ath10k_core]) (ath10k_core_register_work+0x350/0xb34 [ath10k_core]) (process_one_work+0x20c/0x32c) (worker_thread+0x228/0x360) This is due to ath10k_hw_mem_layout is not defined for AR9987. For coredump undefined hw ramdump_size is 0. Check for the ramdump_size before allocation memory. Tested on: AR9987, QCA9984 FW version: 10.4-3.9.0.2-00044 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31libertas: fix a potential NULL pointer dereferenceAllen Pais1-0/+5
[ Upstream commit 7da413a18583baaf35dd4a8eb414fa410367d7f2 ] alloc_workqueue is not checked for errors and as a result, a potential NULL dereference could occur. Signed-off-by: Allen Pais <allen.pais@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31rtlwifi: prevent memory leak in rtl_usb_probeNavid Emamdoost1-1/+4
[ Upstream commit 3f93616951138a598d930dcaec40f2bfd9ce43bb ] In rtl_usb_probe if allocation for usb_data fails the allocated hw should be released. In addition the allocated rtlpriv->usb_data should be released on error handling path. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31ath10k: Check if station exists before forwarding tx airtime reportHauke Mehrtens1-1/+1
[ Upstream commit b10f32672946ad638a430cc4289029b7acf8e979 ] It looks like the FW on QCA9984 already reports the tx airtimes before the station is added to the peer entry. The peer entry is created in ath10k_peer_map_event() just with the vdev_id and the ethaddr, but not with a station entry, this is added later in ath10k_peer_create() in callbacks from mac80211. When there is no sta added to the peer entry, this function fails because it calls ieee80211_sta_register_airtime() with NULL. This was reported in OpenWrt some time ago: https://bugs.openwrt.org/index.php?do=details&task_id=2414 This commit should fix this crash: [ 75.991714] Unable to handle kernel paging request at virtual address fffff9e8 [ 75.991756] pgd = c0204000 [ 75.997955] [fffff9e8] *pgd=5fdfd861, *pte=00000000, *ppte=00000000 [ 76.000537] Internal error: Oops: 37 [#1] SMP ARM [ 76.006686] Modules linked in: pppoe ppp_async ath10k_pci ath10k_core ath pptp pppox ppp_mppe ppp_generic mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_esp xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY usbserial slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_netlink iptable_raw iptable_mangle iptable_filter ipt_ah ipt_ECN ip_tables crc_ccitt compat chaoskey fuse sch_cake sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 [ 76.059974] cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6t_NPT ip6t_MASQUERADE nf_nat_masquerade_ipv6 nf_nat nf_conntrack nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 msdos ip_gre gre ifb sit tunnel4 ip_tunnel tun vfat fat hfsplus cifs nls_utf8 nls_iso8859_15 nls_iso8859_1 nls_cp850 nls_cp437 nls_cp1250 sha1_generic md5 md4 [ 76.130634] usb_storage leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_of_simple ohci_platform ohci_hcd phy_qcom_dwc3 ahci ehci_platform sd_mod ahci_platform libahci_platform libahci libata scsi_mod ehci_hcd gpio_button_hotplug ext4 mbcache jbd2 exfat crc32c_generic [ 76.154772] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.132 #0 [ 76.177001] Hardware name: Generic DT based system [ 76.182990] task: c0b06d80 task.stack: c0b00000 [ 76.187832] PC is at ieee80211_sta_register_airtime+0x24/0x148 [mac80211] [ 76.192211] LR is at ath10k_htt_t2h_msg_handler+0x678/0x10f4 [ath10k_core] [ 76.199052] pc : [<bf75bfac>] lr : [<bf83e8b0>] psr: a0000113 [ 76.205820] sp : c0b01d54 ip : 00000002 fp : bf869c0c [ 76.211981] r10: 0000003c r9 : dbdca138 r8 : 00060002 [ 76.217192] r7 : 00000000 r6 : dabe1150 r5 : 00000000 r4 : dbdc95c0 [ 76.222401] r3 : 00000000 r2 : 00060002 r1 : 00000000 r0 : 00000000 [ 76.229003] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 76.235509] Control: 10c5787d Table: 5c94006a DAC: 00000051 [ 76.242716] Process swapper/0 (pid: 0, stack limit = 0xc0b00210) [ 76.248446] Stack: (0xc0b01d54 to 0xc0b02000) [ 76.254532] 1d40: dbdc95c0 00000000 dabe1150 [ 76.258808] 1d60: 00000001 dabe1150 dbdca138 0000003c bf869c0c bf83e8b0 00000002 c0314b10 [ 76.266969] 1d80: dbdc9c70 00000001 00000001 dabe114c 00010000 00000000 dbdcd724 bf88f3d8 [ 76.275126] 1da0: c0310d28 db393c00 dbdc95c0 00000000 c0b01dd0 c07fb4c4 dbdcd724 00000001 [ 76.283286] 1dc0: 00000022 bf88b09c db393c00 00000022 c0b01dd0 c0b01dd0 00000000 dbdcc5c0 [ 76.291445] 1de0: bf88f04c dbdcd654 dbdcd71c dbdc95c0 00000014 dbdcd724 dbdcc5c0 00000005 [ 76.299605] 1e00: 0004b400 bf85c360 00000000 bf87101c c0b01e24 00000006 00000000 dbdc95c0 [ 76.307764] 1e20: 00000001 00000040 0000012c c0b01e80 1cf51000 bf85c448 dbdcd440 dbdc95c0 [ 76.315925] 1e40: dbdca440 ffffa880 00000040 bf88cb68 dbdcd440 00000001 00000040 ffffa880 [ 76.324084] 1e60: c0b02d00 c06d72e0 dd990080 c0a3f080 c0b255dc c0b047e4 c090afac c090e80c [ 76.332244] 1e80: c0b01e80 c0b01e80 c0b01e88 c0b01e88 dd4cc200 00000000 00000003 c0b0208c [ 76.340405] 1ea0: c0b02080 40000003 ffffe000 00000100 c0b02080 c03015c8 00000000 00000001 [ 76.348564] 1ec0: dd408000 c0a38210 c0b2c7c0 0000000a ffffa880 c0b02d00 c07fb764 00200102 [ 76.356723] 1ee0: dd4cc268 c0a3e414 00000000 00000000 00000001 dd408000 de803000 00000000 [ 76.364883] 1f00: 00000000 c03247cc c0a3e414 c0368f1c c0b03f60 c0b153cc de80200c de802000 [ 76.373042] 1f20: c0b01f48 c0301488 c0308630 60000013 ffffffff c0b01f7c 00000000 c0b00000 [ 76.381204] 1f40: 00000000 c030c08c 00000001 00000000 00000000 c0315180 ffffe000 c0b03cc0 [ 76.389363] 1f60: c0b03c70 00000000 00000000 c0a2da28 00000000 00000000 c0b01f90 c0b01f98 [ 76.397522] 1f80: c030862c c0308630 60000013 ffffffff 00000051 00000000 ffffe000 c035dd18 [ 76.405681] 1fa0: 000000bf c0b03c40 00000000 c0b2c000 dddfce80 c035e060 c0b2c040 c0a00cf4 [ 76.413842] 1fc0: ffffffff ffffffff 00000000 c0a0067c c0a2da28 00000000 00000000 c0b2c1d4 [ 76.422001] 1fe0: c0b03c5c c0a2da24 c0b07ee0 4220406a 512f04d0 4220807c 00000000 00000000 [ 76.430335] [<bf75bfac>] (ieee80211_sta_register_airtime [mac80211]) from [<00000002>] (0x2) [ 76.438314] Code: e1cd81f0 e1a08002 e1cda1f8 e58de020 (e5102618) [ 76.446965] ---[ end trace 227a38ade964d642 ]--- Fixes: bb31b7cb106c ("ath10k: report tx airtime provided by fw") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31ath10k: add cleanup in ath10k_sta_state()Wenwen Wang1-1/+5
[ Upstream commit 334f5b61a6f29834e881923b98d1e27e5ce9620d ] If 'sta->tdls' is false, no cleanup is executed, leading to memory/resource leaks, e.g., 'arsta->tx_stats'. To fix this issue, perform cleanup before go to the 'exit' label. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-17ar5523: check NULL before memcpy() in ar5523_cmd()Denis Efremov1-1/+2
commit 315cee426f87658a6799815845788fde965ddaad upstream. memcpy() call with "idata == NULL && ilen == 0" results in undefined behavior in ar5523_cmd(). For example, NULL is passed in callchain "ar5523_stat_work() -> ar5523_cmd_write() -> ar5523_cmd()". This patch adds ilen check before memcpy() call in ar5523_cmd() to prevent an undefined behavior. Cc: Pontus Fuchs <pontus.fuchs@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: David Laight <David.Laight@ACULAB.COM> Cc: stable@vger.kernel.org Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17wil6210: check len before memcpy() callsDenis Efremov1-2/+4
commit 2c840676be8ffc624bf9bb4490d944fd13c02d71 upstream. memcpy() in wmi_set_ie() and wmi_update_ft_ies() is called with src == NULL and len == 0. This is an undefined behavior. Fix it by checking "ie_len > 0" before the memcpy() calls. As suggested by GCC documentation: "The pointers passed to memmove (and similar functions in <string.h>) must be non-null even when nbytes==0, so GCC can use that information to remove the check after the memmove call." [1] [1] https://gcc.gnu.org/gcc-4.9/porting_to.html Cc: Maya Erez <merez@codeaurora.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: stable@vger.kernel.org Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17rtlwifi: rtl8192de: Fix missing enable interrupt flagLarry Finger1-4/+5
commit 330bb7117101099c687e9c7f13d48068670b9c62 upstream. In commit 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for new drivers"), the flag that indicates that interrupts are enabled was never set. In addition, there are several places when enable/disable interrupts were commented out are restored. A sychronize_interrupts() call is removed. Fixes: 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for new drivers") Cc: Stable <stable@vger.kernel.org> # v3.18+ Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17rtlwifi: rtl8192de: Fix missing callback that tests for hw release of bufferLarry Finger3-0/+20
commit 3155db7613edea8fb943624062baf1e4f9cfbfd6 upstream. In commit 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for new drivers"), a callback needed to check if the hardware has released a buffer indicating that a DMA operation is completed was not added. Fixes: 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for new drivers") Cc: Stable <stable@vger.kernel.org> # v3.18+ Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17rtlwifi: rtl8192de: Fix missing code to retrieve RX buffer addressLarry Finger1-3/+5
commit 0e531cc575c4e9e3dd52ad287b49d3c2dc74c810 upstream. In commit 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for new drivers"), a callback to get the RX buffer address was added to the PCI driver. Unfortunately, driver rtl8192de was not modified appropriately and the code runs into a WARN_ONCE() call. The use of an incorrect array is also fixed. Fixes: 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for new drivers") Cc: Stable <stable@vger.kernel.org> # 3.18+ Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17iwlwifi: pcie: fix support for transmitting SKBs with fraglistJohannes Berg1-0/+14
commit 4f4925a7b23428d5719af5a2816586b2a0e6fd19 upstream. When the implementation of SKBs with fraglist was sent upstream, a merge-damage occurred and half the patch was not applied. This causes problems in high-throughput situations with AX200 devices, including low throughput and FW crashes. Introduce the part that was missing from the original patch. Fixes: 0044f1716c4d ("iwlwifi: pcie: support transmitting SKBs with fraglist") Cc: stable@vger.kernel.org # 4.20+ Signed-off-by: Johannes Berg <johannes.berg@intel.com> [ This patch was created by me, but the original author of this code is Johannes, so his s-o-b is here and he's marked as the author of the patch. ] Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17virt_wifi: fix use-after-free in virt_wifi_newlink()Taehee Yoo1-2/+2
commit bc71d8b580ba81b55b6e15b1c0320632515b4bac upstream. When virt_wifi interface is created, virt_wifi_newlink() is called and it calls register_netdevice(). if register_netdevice() fails, it internally would call ->priv_destructor(), which is virt_wifi_net_device_destructor() and it frees netdev. but virt_wifi_newlink() still use netdev. So, use-after-free would occur in virt_wifi_newlink(). Test commands: ip link add dummy0 type dummy modprobe bonding ip link add bonding_masters link dummy0 type virt_wifi Splat looks like: [ 202.220554] BUG: KASAN: use-after-free in virt_wifi_newlink+0x88b/0x9a0 [virt_wifi] [ 202.221659] Read of size 8 at addr ffff888061629cb8 by task ip/852 [ 202.222896] CPU: 1 PID: 852 Comm: ip Not tainted 5.4.0-rc5 #3 [ 202.223765] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 202.225073] Call Trace: [ 202.225532] dump_stack+0x7c/0xbb [ 202.226869] print_address_description.constprop.5+0x1be/0x360 [ 202.229362] __kasan_report+0x12a/0x16f [ 202.230714] kasan_report+0xe/0x20 [ 202.232595] virt_wifi_newlink+0x88b/0x9a0 [virt_wifi] [ 202.233370] __rtnl_newlink+0xb9f/0x11b0 [ 202.244909] rtnl_newlink+0x65/0x90 [ ... ] Cc: stable@vger.kernel.org Fixes: c7cdba31ed8b ("mac80211-next: rtnetlink wifi simulation device") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20191121122645.9355-1-ap420073@gmail.com [trim stack dump a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17brcmfmac: disable PCIe interrupts before bus resetRafał Miłecki1-0/+2
commit 5d26a6a6150c486f51ea2aaab33af04db02f63b8 upstream. Keeping interrupts on could result in brcmfmac freeing some resources and then IRQ handlers trying to use them. That was obviously a straight path for crashing a kernel. Example: CPU0 CPU1 ---- ---- brcmf_pcie_reset brcmf_pcie_bus_console_read brcmf_detach ... brcmf_fweh_detach brcmf_proto_detach brcmf_pcie_isr_thread ... brcmf_proto_msgbuf_rx_trigger ... drvr->proto->pd brcmf_pcie_release_irq [ 363.789218] Unable to handle kernel NULL pointer dereference at virtual address 00000038 [ 363.797339] pgd = c0004000 [ 363.800050] [00000038] *pgd=00000000 [ 363.803635] Internal error: Oops: 17 [#1] SMP ARM (...) [ 364.029209] Backtrace: [ 364.031725] [<bf243838>] (brcmf_proto_msgbuf_rx_trigger [brcmfmac]) from [<bf2471dc>] (brcmf_pcie_isr_thread+0x228/0x274 [brcmfmac]) [ 364.043662] r7:00000001 r6:c8ca0000 r5:00010000 r4:c7b4f800 Fixes: 4684997d9eea ("brcmfmac: reset PCIe bus on a firmware crash") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-13mwifiex: Re-work support for SDIO HW resetUlf Hansson3-12/+27
commit cdb2256f795e8e78cc43f32d091695b127dfb4df upstream. The SDIO HW reset procedure in mwifiex_sdio_card_reset_work() is broken, when the SDIO card is shared with another SDIO func driver. This is the case when the Bluetooth btmrvl driver is being used in combination with mwifiex. More precisely, when mwifiex_sdio_card_reset_work() runs to resets the SDIO card, the btmrvl driver doesn't get notified about it. Beyond that point, the btmrvl driver will fail to communicate with the SDIO card. This is a generic problem for SDIO func drivers sharing an SDIO card, which are about to be addressed in subsequent changes to the mmc core and the mmc_hw_reset() interface. In principle, these changes means the mmc_hw_reset() interface starts to return 1 if the are multiple drivers for the SDIO card, as to indicate to the caller that the reset needed to be scheduled asynchronously through a hotplug mechanism of the SDIO card. Let's prepare the mwifiex driver to support the upcoming new behaviour of mmc_hw_reset(), which means extending the mwifiex_sdio_card_reset_work() to support the asynchronous SDIO HW reset path. This also means, we need to allow the ->remove() callback to run, without waiting for the FW to be loaded. Additionally, during system suspend, mwifiex_sdio_suspend() may be called when a reset has been scheduled, but waiting to be executed. In this scenario let's simply return -EBUSY to abort the suspend process, as to allow the reset to be completed first. Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Cc: stable@vger.kernel.org # v5.4+ Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-13rsi: release skb if rsi_prepare_beacon failsNavid Emamdoost1-0/+1
commit d563131ef23cbc756026f839a82598c8445bc45f upstream. In rsi_send_beacon, if rsi_prepare_beacon fails the allocated skb should be released. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-29ath10k: restore QCA9880-AR1A (v1) detectionChristian Lamparter1-11/+25
commit f8914a14623a79b73f72b2b1ee4cd9b2cb91b735 upstream. This patch restores the old behavior that read the chip_id on the QCA988x before resetting the chip. This needs to be done in this order since the unsupported QCA988x AR1A chips fall off the bus when resetted. Otherwise the next MMIO Op after the reset causes a BUS ERROR and panic. Cc: stable@vger.kernel.org Fixes: 1a7fecb766c8 ("ath10k: reset chip before reading chip_id in probe") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-29ath10k: Fix HOST capability QMI incompatibilityBjorn Andersson5-3/+45
commit 7165ef890a4c44cf16db66b82fd78448f4bde6ba upstream. The introduction of 768ec4c012ac ("ath10k: update HOST capability QMI message") served the purpose of supporting the new and extended HOST capability QMI message. But while the new message adds a slew of optional members it changes the data type of the "daemon_support" member, which means that older versions of the firmware will fail to decode the incoming request message. There is no way to detect this breakage from Linux and there's no way to recover from sending the wrong message (i.e. we can't just try one format and then fallback to the other), so a quirk is introduced in DeviceTree to indicate to the driver that the firmware requires the 8bit version of this message. Cc: stable@vger.kernel.org Fixes: 768ec4c012ac ("ath10k: update HOST capability qmi message") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-29ath10k: Fix a NULL-ptr-deref bug in ath10k_usb_alloc_urb_from_pipeHui Peng1-0/+8
commit bfd6e6e6c5d2ee43a3d9902b36e01fc7527ebb27 upstream. The `ar_usb` field of `ath10k_usb_pipe_usb_pipe` objects are initialized to point to the containing `ath10k_usb` object according to endpoint descriptors read from the device side, as shown below in `ath10k_usb_setup_pipe_resources`: for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { endpoint = &iface_desc->endpoint[i].desc; // get the address from endpoint descriptor pipe_num = ath10k_usb_get_logical_pipe_num(ar_usb, endpoint->bEndpointAddress, &urbcount); ...... // select the pipe object pipe = &ar_usb->pipes[pipe_num]; // initialize the ar_usb field pipe->ar_usb = ar_usb; } The driver assumes that the addresses reported in endpoint descriptors from device side to be complete. If a device is malicious and does not report complete addresses, it may trigger NULL-ptr-deref `ath10k_usb_alloc_urb_from_pipe` and `ath10k_usb_free_urb_to_pipe`. This patch fixes the bug by preventing potential NULL-ptr-deref. Signed-off-by: Hui Peng <benquike@gmail.com> Reported-by: Hui Peng <benquike@gmail.com> Reported-by: Mathias Payer <mathias.payer@nebelwelt.net> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [groeck: Add driver tag to subject, fix build warning] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-29ath9k_hw: fix uninitialized variable dataDenis Efremov1-1/+1
commit 80e84f36412e0c5172447b6947068dca0d04ee82 upstream. Currently, data variable in ar9003_hw_thermo_cal_apply() could be uninitialized if ar9300_otp_read_word() will fail to read the value. Initialize data variable with 0 to prevent an undefined behavior. This will be enough to handle error case when ar9300_otp_read_word() fails. Fixes: 80fe43f2bbd5 ("ath9k_hw: Read and configure thermocal for AR9462") Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: stable@vger.kernel.org Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-14Merge tag 'wireless-drivers-2019-11-14' of ↵David S. Miller1-13/+7
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.4 Hopefully last fixes for v5.4, only one iwlwifi fix this time. iwlwifi * fix A-MSDU data corruption when using CCMP/GCMP ciphers ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08iwlwifi: pcie: don't consider IV len in A-MSDUMordechay Goodstein1-13/+7
From gen2 PN is totally offloaded to hardware (also the space for the IV isn't part of the skb). As you can see in mvm/mac80211.c:3545, the MAC for cipher types CCMP/GCMP doesn't set IEEE80211_KEY_FLAG_PUT_IV_SPACE for gen2 NICs. This causes all the AMSDU data to be corrupted with cipher enabled. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-01Merge tag 'wireless-drivers-2019-11-01' of ↵David S. Miller16-139/+305
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 5.4 Third set of fixes for 5.4. Most of them are for iwlwifi but important fixes also for rtlwifi and mt76, the overflow fix for rtlwifi being most important. iwlwifi * fix merge damage on earlier patch * various fixes to device id handling * fix scan config command handling which caused firmware asserts rtlwifi * fix overflow on P2P IE handling * don't deliver too small frames to mac80211 mt76 * disable PCIE_ASPM * fix buffer DMA unmap on certain cases ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30iwlwifi: fw api: support new API for scan config cmdAyala Beker4-10/+61
The API was reduced to include only knowledge currently needed by the FW scan logic, the rest is legacy. Support the new, reduced version. Using the old API with newer firmwares (starting from iwlwifi-*-50.ucode, which implements and requires the new API version) causes an assertion failure similar to this one: [ 2.854505] iwlwifi 0000:00:14.3: 0x20000038 | BAD_COMMAND Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-30mt76: dma: fix buffer unmap with non-linear skbsLorenzo Bianconi2-4/+7
mt76 dma layer is supposed to unmap skb data buffers while keep txwi mapped on hw dma ring. At the moment mt76 wrongly unmap txwi or does not unmap data fragments in even positions for non-linear skbs. This issue may result in hw hangs with A-MSDU if the system relies on IOMMU or SWIOTLB. Fix this behaviour properly unmapping data fragments on non-linear skbs. Fixes: 17f1de56df05 ("mt76: add common code shared between multiple chipsets") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-30mt76: mt76x2e: disable pcie_aspm by defaultLorenzo Bianconi4-0/+51
On same device (e.g. U7612E-H1) PCIE_ASPM causes continuous mcu hangs and instability. Since mt76x2 series does not manage PCIE PS states, first we try to disable ASPM using pci_disable_link_state. If it fails, we will disable PCIE PS configuring PCI registers. This patch has been successfully tested on U7612E-H1 mini-pice card Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-25virt_wifi: fix refcnt leak in module exit routineTaehee Yoo1-2/+52
virt_wifi_newlink() calls netdev_upper_dev_link() and it internally holds reference count of lower interface. Current code does not release a reference count of the lower interface when the lower interface is being deleted. So, reference count leaks occur. Test commands: ip link add dummy0 type dummy ip link add vw1 link dummy0 type virt_wifi ip link del dummy0 Splat looks like: [ 133.787526][ T788] WARNING: CPU: 1 PID: 788 at net/core/dev.c:8274 rollback_registered_many+0x835/0xc80 [ 133.788355][ T788] Modules linked in: virt_wifi cfg80211 dummy team af_packet sch_fq_codel ip_tables x_tables unix [ 133.789377][ T788] CPU: 1 PID: 788 Comm: ip Not tainted 5.4.0-rc3+ #96 [ 133.790069][ T788] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 133.791167][ T788] RIP: 0010:rollback_registered_many+0x835/0xc80 [ 133.791906][ T788] Code: 00 4d 85 ff 0f 84 b5 fd ff ff ba c0 0c 00 00 48 89 de 4c 89 ff e8 9b 58 04 00 48 89 df e8 30 [ 133.794317][ T788] RSP: 0018:ffff88805ba3f338 EFLAGS: 00010202 [ 133.795080][ T788] RAX: ffff88805e57e801 RBX: ffff88805ba34000 RCX: ffffffffa9294723 [ 133.796045][ T788] RDX: 1ffff1100b746816 RSI: 0000000000000008 RDI: ffffffffabcc4240 [ 133.797006][ T788] RBP: ffff88805ba3f4c0 R08: fffffbfff5798849 R09: fffffbfff5798849 [ 133.797993][ T788] R10: 0000000000000001 R11: fffffbfff5798848 R12: dffffc0000000000 [ 133.802514][ T788] R13: ffff88805ba3f440 R14: ffff88805ba3f400 R15: ffff88805ed622c0 [ 133.803237][ T788] FS: 00007f2e9608c0c0(0000) GS:ffff88806cc00000(0000) knlGS:0000000000000000 [ 133.804002][ T788] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 133.804664][ T788] CR2: 00007f2e95610603 CR3: 000000005f68c004 CR4: 00000000000606e0 [ 133.805363][ T788] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 133.806073][ T788] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 133.806787][ T788] Call Trace: [ 133.807069][ T788] ? generic_xdp_install+0x310/0x310 [ 133.807612][ T788] ? lock_acquire+0x164/0x3b0 [ 133.808077][ T788] ? is_bpf_text_address+0x5/0xf0 [ 133.808640][ T788] ? deref_stack_reg+0x9c/0xd0 [ 133.809138][ T788] ? __nla_validate_parse+0x98/0x1ab0 [ 133.809944][ T788] unregister_netdevice_many.part.122+0x13/0x1b0 [ 133.810599][ T788] rtnl_delete_link+0xbc/0x100 [ 133.811073][ T788] ? rtnl_af_register+0xc0/0xc0 [ 133.811672][ T788] rtnl_dellink+0x30e/0x8a0 [ 133.812205][ T788] ? is_bpf_text_address+0x5/0xf0 [ ... ] [ 144.110530][ T788] unregister_netdevice: waiting for dummy0 to become free. Usage count = 1 This patch adds notifier routine to delete upper interface before deleting lower interface. Fixes: c7cdba31ed8b ("mac80211-next: rtnetlink wifi simulation device") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-25net: core: add generic lockdep keysTaehee Yoo1-25/+0
Some interface types could be nested. (VLAN, BONDING, TEAM, MACSEC, MACVLAN, IPVLAN, VIRT_WIFI, VXLAN, etc..) These interface types should set lockdep class because, without lockdep class key, lockdep always warn about unexisting circular locking. In the current code, these interfaces have their own lockdep class keys and these manage itself. So that there are so many duplicate code around the /driver/net and /net/. This patch adds new generic lockdep keys and some helper functions for it. This patch does below changes. a) Add lockdep class keys in struct net_device - qdisc_running, xmit, addr_list, qdisc_busylock - these keys are used as dynamic lockdep key. b) When net_device is being allocated, lockdep keys are registered. - alloc_netdev_mqs() c) When net_device is being free'd llockdep keys are unregistered. - free_netdev() d) Add generic lockdep key helper function - netdev_register_lockdep_key() - netdev_unregister_lockdep_key() - netdev_update_lockdep_key() e) Remove unnecessary generic lockdep macro and functions f) Remove unnecessary lockdep code of each interfaces. After this patch, each interface modules don't need to maintain their lockdep keys. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-23rtlwifi: rtl_pci: Fix problem of too small skb->lenLarry Finger1-1/+2
In commit 8020919a9b99 ("mac80211: Properly handle SKB with radiotap only"), buffers whose length is too short cause a WARN_ON(1) to be executed. This change exposed a fault in rtlwifi drivers, which is fixed by regarding packets with skb->len <= FCS_LEN as though they are in error and dropping them. The test is now annotated as likely. Cc: Stable <stable@vger.kernel.org> # v5.0+ Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-23iwlwifi: pcie: 0x2720 is qu and 0x30DC is notLuca Coelho1-54/+55
When converting the wrong qu configurations in an earlier commit, I accidentally swapped 0x2720 and 0x30DC. Instead of converting 0x2720, I converted 0x30DC. Undo 0x30DC and convert 0x2720. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 00:24:16 +0300