summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2012-01-24rtlwifi: Update copyright datesLarry Finger21-21/+21
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24rtl8192cu: Remove dead code never selectedLarry Finger1-170/+0
The original driver contained some conditional code that was not selected, but was not deleted in case it would be used later. That code can now be removed. Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24rtlwifi: rtl8192c_common: rtl8192de: Check for allocation failuresLarry Finger4-10/+20
In https://bugzilla.redhat.com/show_bug.cgi?id=771656, a kernel bug was triggered due to a failed skb allocation that was not checked. This event lead to an audit of all memory allocations in the complete rtlwifi family of drivers. This patch fixes the rest. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24iwlwifi: update CopyrightWey-Yi Guy53-75/+75
Update Copyright to 2012 Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24iwlwifi: add testmode cmd IWL_TM_CMD_APP2DEV_GET_FW_INFOKenny Hsu2-3/+57
Add new testmode command IWL_TM_CMD_APP2DEV_GET_FW_INFO for reporting the following information of existing loaded uCode image. + uCode type + Instruction section size + Data section size Signed-off-by: Kenny Hsu <kenny.hsu@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24iwlwifi: update error dump in testmode command sram_readKenny Hsu1-4/+4
The error message will be show up by using IWL_ERR insteads of IWl_DEBUG_INFO. Signed-off-by: Kenny Hsu <kenny.hsu@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24iwlwifi: enhance testmode command sram_readKenny Hsu2-4/+6
This patch enables SRAM read function to support entire target memory. Signed-off-by: Kenny Hsu <kenny.hsu@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24iwlwifi: update testmode command of direct register accessKenny Hsu1-2/+2
In order to make sure the testcommand function of direct register access can be performed even NIC is asleep, replace corresponding handler iwl_read32 and iwl_write32 by using iwl_direct_read32 and iwl_direct_write32. Signed-off-by: Kenny Hsu <kenny.hsu@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24iwlwifi: Sanity check for sta_idWey-Yi Guy1-4/+7
On my testing, I saw some strange behavior [ 421.739708] iwlwifi 0000:01:00.0: ACTIVATE a non DRIVER active station id 148 addr 00:00:00:00:00:00 [ 421.739719] iwlwifi 0000:01:00.0: iwl_sta_ucode_activate Added STA id 148 addr 00:00:00:00:00:00 to uCode not sure how it happen, but adding the sanity check to prevent memory corruption Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24iwlwifi: don't process the info from uCode if does not has ownershipWey-Yi Guy1-13/+15
When enable the testmode from user space and working with uCode, driver does not own the uCode and should not process the notifications or pkts from uCode Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24rtlwifi: Simplify chip version id loggingJoe Perches2-38/+27
Reduce object size a few KB too. $ size drivers/net/wireless/rtlwifi/built-in.o* text data bss dec hex filename 584493 55333 126800 766626 bb2a2 drivers/net/wireless/rtlwifi/built-in.o.new 586904 55333 127216 769453 bbdad drivers/net/wireless/rtlwifi/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24rtlwifi: Remove incorrect logging message prefixesJoe Perches3-5/+5
pr_fmt() adds them. These are unnecessary and wrong. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24rtlwifi: add CONFIG_RTLWIFI_DEBUG to remove all of the debug logging codeJoe Perches2-0/+39
It does seem odd though to have a DBG_EMERG and not always emit it. What might also be useful for any embedded use is to add CONFIG_RTLWIFI_DEBUG to conditionally remove all of the debug logging code to reduce the largish object size. This reduces the object size by about 1/3 (250KB) when CONFIG_RTLWIFI_DEBUG is not set. $ size drivers/net/wireless/rtlwifi/built-in.o* text data bss dec hex filename 368722 55333 94224 518279 7e887 drivers/net/wireless/rtlwifi/built-in.o.new 586904 55333 127216 769453 bbdad drivers/net/wireless/rtlwifi/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24rtlwifi: Optimize RT_TRACE macro use of KBUILD_MODNAME for sizeJoe Perches1-3/+3
Moving the KBUILD_MODNAME to the format reduces the overall object size a small amount. $ size drivers/net/wireless/rtlwifi/built-in.o* text data bss dec hex filename 586904 55333 127216 769453 bbdad drivers/net/wireless/rtlwifi/built-in.o.new 588901 55333 127216 771450 bc57a drivers/net/wireless/rtlwifi/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24rtlwifi: Remove duplicate __func__Joe Perches1-1/+1
The RT_TRACE macro already prepends it. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24rtlwifi: Convert RT_ASSERT macro to use ##__VA_ARGS__Joe Perches21-70/+68
Consolidate printks to avoid possible message interleaving and reduce the object size. Remove unnecessary RT_ASSERT parentheses. Align arguments. Coalesce formats. Remove unnecessary __func__ use as the macro uses it. $ size drivers/net/wireless/rtlwifi/built-in.o* text data bss dec hex filename 588901 55333 127216 771450 bc57a drivers/net/wireless/rtlwifi/built-in.o.new 590002 55333 127560 772895 bcb1f drivers/net/wireless/rtlwifi/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24rtlwifi: Convert RTPRINT macro to use ##__VA_ARGS__Joe Perches9-370/+355
Consolidate printks to avoid possible message interleaving and reduce the object size. Remove unnecessary RTPRINT parentheses. Coalesce formats. Align arguments. $ size drivers/net/wireless/rtlwifi/built-in.o* text data bss dec hex filename 590002 55333 127560 772895 bcb1f drivers/net/wireless/rtlwifi/built-in.o.new 594841 55333 129680 779854 be64e drivers/net/wireless/rtlwifi/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24rtlwifi: Convert RT_TRACE macro to use ##__VA_ARGS__Joe Perches44-1784/+1613
Consolidate printks to avoid possible message interleaving and reduce the object size. Remove unnecessary RT_TRACE parentheses. Miscellaneous typo and grammar fixes. Add missing newlines to formats. Remove duplicate KERN_DEBUG prefixes. Coalesce formats. Align arguments. $ size drivers/net/wireless/rtlwifi/built-in.o* text data bss dec hex filename 594841 55333 129680 779854 be64e drivers/net/wireless/rtlwifi/built-in.o.new 607022 55333 138720 801075 c3933 drivers/net/wireless/rtlwifi/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24rtlwifi: Standardize RT_PRINT_DATA macro and usesJoe Perches12-26/+23
Use a single printk(KERN_DEBUG to emit the header line to avoid any possible output interleaving. Remove unnecessary parentheses from the calling uses. Standardize header arg without trailing \n or colon. Fix a few pairwiase/pairwise typos. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24rtlwifi: Neaten RT_ASSERT, RT_TRACE, RTPRINT, RT_PRINT_DATA macrosJoe Perches5-53/+47
Make the macros a bit more readable. Use do {...} while (0) without terminating semicolons. Add missing terminating semicolon to a few uses. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24b43: N-PHY: trivial: change save&rest order in RSSI pollingRafał Miłecki1-8/+8
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24b43: N-PHY: implement RSSI calibration for rev3+Rafał Miłecki1-6/+187
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24brcm80211: make ethtool_ops constStephen Hemminger1-2/+2
All usage of ethtool_ops should be const; also add comma at end of initializer list. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24b43: N-PHY: upload PAPD PGA gain delta tableRafał Miłecki3-6/+12
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24b43: N-PHY: fix typos in RF controlRafał Miłecki2-6/+6
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24b43: N-PHY: add helper for getting gain tableRafał Miłecki3-94/+64
Also move the code to tables file. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24b43: N-PHY: implement TX power control setupRafał Miłecki2-1/+217
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24b43: add maskset helpersRafał Miłecki3-57/+36
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17mwl8k: Fixing Sparse ENDIAN CHECK warningYogesh Ashok Powar1-1/+1
Fixing following sparse warning >drivers/net/wireless/mwl8k.c:2780:15: warning: incorrect type in assignment (different base types) >drivers/net/wireless/mwl8k.c:2780:15: expected restricted unsigned short [usertype] channel >drivers/net/wireless/mwl8k.c:2780:15: got unsigned short [unsigned] [usertype] hw_value Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17mwl8k: fix condition in mwl8k_cmd_encryption_remove_key()Dan Carpenter1-1/+1
The intent here was to check whether key->cipher was WEP40 or WEP104. We do a similar check correctly in several other places in this file. The current condition is always true. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17brcmfmac: work-around gcc 4.7 build issueAlexandre Oliva1-1/+1
Alexandre Oliva <oliva@lsd.ic.unicamp.br> says: "It's an issue brought about by GCC 4.7's partial-inlining, that ends up splitting the udelay function just at the wrong spot, in such a way that some sanity checks for constants fails, and we end up calling bad_udelay. This patch fixes the problem. Feel free to push it upstream if it makes sense to you." Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17brcmsmac: remove PCI suspend/resume from bcma driverLinus Torvalds1-35/+3
The brcmsmac driver isn't a PCI driver any more, it's a bcma one. The PCI device has been resumed by the PCI driver (the generic PCI layer, really), we should be resuming just our own driver state. Also add pr_debug() calls to show that we now actually get the suspend/resume events. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17bcma: connect the bcma bus suspend/resume to the bcma driver suspend/resumeLinus Torvalds1-1/+1
Now the low-level driver actually gets informed that it is getting suspended and resumed. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17wireless: iwlwifi: iwl-scan.c: Fix build warningFabio Estevam1-1/+1
Fix the following build warning: drivers/net/wireless/iwlwifi/iwl-scan.c: In function ‘iwlagn_request_scan’: drivers/net/wireless/iwlwifi/iwl-scan.c:572: warning: ‘cmd_len’ may be used uninitialized in this function Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17ath9k_hw: fix interpretation of the rx KeyMiss flagFelix Fietkau2-4/+6
Documentation states that the KeyMiss flag is only valid if RxFrameOK is unset, however empirical evidence has shown that this is false. When KeyMiss is set (and RxFrameOK is 1), the hardware passes a valid frame which has not been decrypted. The driver then falsely marks the frame as decrypted, and when using CCMP this corrupts the rx CCMP PN, leading to connection hangs. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-13rt2800pci: fix spurious interrupts generationStanislaw Gruszka1-20/+8
Same devices can generate interrupt without properly setting bit in INT_SOURCE_CSR register (spurious interrupt), what will cause IRQ line will be disabled by interrupts controller driver. We discovered that clearing INT_MASK_CSR stops such behaviour. We previously first read that register, and then clear all know interrupt sources bits and do not touch reserved bits. After this patch, we write to all register content (I believe writing to reserved bits on that register will not cause any problems, I tested that on my rt2800pci device). This fix very bad performance problem, practically making device unusable (since worked without interrupts), reported in: https://bugzilla.redhat.com/show_bug.cgi?id=658451 We previously tried to workaround that issue in commit 4ba7d9997869d25bd223dea7536fc1ce9fab3b3b "rt2800pci: handle spurious interrupts", but it was reverted in commit 82e5fc2a34fa9ffea38f00c4066b7e600a0ca5e6 as thing, that will prevent to detect real spurious interrupts. Reported-and-tested-by: Amir Hedayaty <hedayaty@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-13ipw2x00: signedness bug handling frame lengthDan Carpenter1-2/+2
This is basically just a cleanup. Large positive numbers get counted as negative but then get implicitly cast to positive again for the checks that matter. This does make a small difference in ipw_handle_promiscuous_rx() when we test "if (unlikely((len + IPW_RX_FRAME_SIZE) > skb_tailroom(rxb->skb)))" It should return there, but we don't return until a couple lines later when we test "if (len > IPW_RX_BUF_SIZE - sizeof(struct ipw_rt_hdr)) {". The difference is that in the second test the sizeof() means that there is an implied cast to unsigned. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-13wireless: b43: fix Oops on card eject during transferGuennadi Liakhovetski1-1/+4
An Oops has once been observed, when the SDIO card had been ejected during IO. The PC value shows, that the dev pointer in b43_op_stop() was NULL. (I moved the NULL check before the lock, based upon a suggestion from Julian Calaby <julian.calaby@gmail.com>. -- JWL) Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds7-10/+11
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (69 commits) pptp: Accept packet with seq zero RDS: Remove some unused iWARP code net: fsl: fec: handle 10Mbps speed in RMII mode drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c: add missing iounmap drivers/net/ethernet/tundra/tsi108_eth.c: add missing iounmap ksz884x: fix mtu for VLAN net_sched: sfq: add optional RED on top of SFQ dp83640: Fix NOHZ local_softirq_pending 08 warning gianfar: Fix invalid TX frames returned on error queue when time stamping gianfar: Fix missing sock reference when processing TX time stamps phylib: introduce mdiobus_alloc_size() net: decrement memcg jump label when limit, not usage, is changed net: reintroduce missing rcu_assign_pointer() calls inet_diag: Rename inet_diag_req_compat into inet_diag_req inet_diag: Rename inet_diag_req into inet_diag_req_v2 bond_alb: don't disable softirq under bond_alb_xmit mac80211: fix rx->key NULL pointer dereference in promiscuous mode nl80211: fix old station flags compatibility mdio-octeon: use an unique MDIO bus name. mdio-gpio: use an unique MDIO bus name. ...
2012-01-13brcmsmac: fix reading of PCI sprom contentsLinus Torvalds1-11/+20
It appears that you can only read the sprom contents with aligned 16-bit reads: anything else causes at least some versions of the broadcom chipset to abort the PCI transaction, returning 0xff. This apparently doesn't trigger very often, because most setups don't use an external srom chip, and the OTP sprom loading doesn't have this issue. But at least the current 11" Macbook Air does trigger it, and wireless communications were broken as a result. Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13Merge branch 'master' of ↵David S. Miller7-10/+11
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-01-11ath9k: Fix regression in channelwidth switch at the same channelRajkumar Manoharan2-6/+3
The commit "ath9k: Fix invalid noisefloor reading due to channel update" preserves the current channel noisefloor readings before updating channel type at the same channel index. It is also updating the curchan pointer. As survey updation is also referring curchan pointer to fetch the appropriate index, which might leads to invalid memory access. This patch partially reverts the change and stores the noise floor history buffer before updating channel type w/o updating curchan. Cc: stable@kernel.org Cc: Gary Morain <gmorain@google.com> Cc: Paul Stewart <pstew@google.com> Reported-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-11brcm80211: Don't leak 'vbuffer' in brcmf_sdbrcm_write_vars()Jesper Juhl1-1/+3
If the memory allocation 'nvram_ularray = kmalloc(varsize, GFP_ATOMIC);' fails we'll leak the memory allocated to 'vbuffer' when we return -ENOMEM from the function. This patch resolves the leak by kfree()'ing the allocated memory before the return. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-11ath9k_hw: fix a commentMohammed Shafi Shajakhan3-3/+1
also remove an unused macro and a function declaration Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-11rtl8192se: Fix BUG caused by failure to check skb allocationLarry Finger1-0/+4
When downloading firmware into the device, the driver fails to check the return when allocating an skb. When the allocation fails, a BUG can be generated, as seen in https://bugzilla.redhat.com/show_bug.cgi?id=771656. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-09Merge branch 'for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (53 commits) Kconfig: acpi: Fix typo in comment. misc latin1 to utf8 conversions devres: Fix a typo in devm_kfree comment btrfs: free-space-cache.c: remove extra semicolon. fat: Spelling s/obsolate/obsolete/g SCSI, pmcraid: Fix spelling error in a pmcraid_err() call tools/power turbostat: update fields in manpage mac80211: drop spelling fix types.h: fix comment spelling for 'architectures' typo fixes: aera -> area, exntension -> extension devices.txt: Fix typo of 'VMware'. sis900: Fix enum typo 'sis900_rx_bufer_status' decompress_bunzip2: remove invalid vi modeline treewide: Fix comment and string typo 'bufer' hyper-v: Update MAINTAINERS treewide: Fix typos in various parts of the kernel, and fix some comments. clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR gpio: Kconfig: drop unknown symbol 'CS5535_GPIO' leds: Kconfig: Fix typo 'D2NET_V2' sound: Kconfig: drop unknown symbol ARCH_CLPS7500 ... Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new kconfig additions, close to removed commented-out old ones)
2012-01-09Merge branch 'for-linus2' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs * 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits) reiserfs: Properly display mount options in /proc/mounts vfs: prevent remount read-only if pending removes vfs: count unlinked inodes vfs: protect remounting superblock read-only vfs: keep list of mounts for each superblock vfs: switch ->show_options() to struct dentry * vfs: switch ->show_path() to struct dentry * vfs: switch ->show_devname() to struct dentry * vfs: switch ->show_stats to struct dentry * switch security_path_chmod() to struct path * vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb vfs: trim includes a bit switch mnt_namespace ->root to struct mount vfs: take /proc/*/mounts and friends to fs/proc_namespace.c vfs: opencode mntget() mnt_set_mountpoint() vfs: spread struct mount - remaining argument of next_mnt() vfs: move fsnotify junk to struct mount vfs: move mnt_devname vfs: move mnt_list to struct mount vfs: switch pnode.h macros to struct mount * ...
2012-01-08Merge branch 'driver-core-next' of ↵Linus Torvalds12-177/+12
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core * 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (73 commits) arm: fix up some samsung merge sysdev conversion problems firmware: Fix an oops on reading fw_priv->fw in sysfs loading file Drivers:hv: Fix a bug in vmbus_driver_unregister() driver core: remove __must_check from device_create_file debugfs: add missing #ifdef HAS_IOMEM arm: time.h: remove device.h #include driver-core: remove sysdev.h usage. clockevents: remove sysdev.h arm: convert sysdev_class to a regular subsystem arm: leds: convert sysdev_class to a regular subsystem kobject: remove kset_find_obj_hinted() m86k: gpio - convert sysdev_class to a regular subsystem mips: txx9_sram - convert sysdev_class to a regular subsystem mips: 7segled - convert sysdev_class to a regular subsystem sh: dma - convert sysdev_class to a regular subsystem sh: intc - convert sysdev_class to a regular subsystem power: suspend - convert sysdev_class to a regular subsystem power: qe_ic - convert sysdev_class to a regular subsystem power: cmm - convert sysdev_class to a regular subsystem s390: time - convert sysdev_class to a regular subsystem ... Fix up conflicts with 'struct sysdev' removal from various platform drivers that got changed: - arch/arm/mach-exynos/cpu.c - arch/arm/mach-exynos/irq-eint.c - arch/arm/mach-s3c64xx/common.c - arch/arm/mach-s3c64xx/cpu.c - arch/arm/mach-s5p64x0/cpu.c - arch/arm/mach-s5pv210/common.c - arch/arm/plat-samsung/include/plat/cpu.h - arch/powerpc/kernel/sysfs.c and fix up cpu_is_hotpluggable() as per Greg in include/linux/cpu.h
2012-01-06Merge branch 'driver-core-next' into Linux 3.2Greg Kroah-Hartman12-177/+12
This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file, and it fixes the build error in the arch/x86/kernel/microcode_core.c file, that the merge did not catch. The microcode_core.c patch was provided by Stephen Rothwell <sfr@canb.auug.org.au> who was invaluable in the merge issues involved with the large sysdev removal process in the driver-core tree. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-05Merge branch 'master' of ↵John W. Linville46-1981/+999
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/b43legacy/dma.c