summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2020-07-22Revert "ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb"Greg Kroah-Hartman2-42/+11
This reverts commit 97efdabe90f035d16d3f79218055e87c76ec02e6 which is commit 2bbcaaee1fcbd83272e29f31e2bb7e70d8c49e05 upstream. It is being reverted upstream, just hasn't made it there yet and is causing lots of problems. Reported-by: Hans de Goede <hdegoede@redhat.com> Cc: Qiujun Huang <hqjagain@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-20b43_legacy: Fix connection problem with WPA3Larry Finger1-0/+1
commit 6a29d134c04a8acebb7a95251acea7ad7abba106 upstream. Since the driver was first introduced into the kernel, it has only handled the ciphers associated with WEP, WPA, and WPA2. It fails with WPA3 even though mac80211 can handle those additional ciphers in software, b43legacy did not report that it could handle them. By setting MFP_CAPABLE using ieee80211_set_hw(), the problem is fixed. With this change, b43legacy will handle the ciphers it knows in hardware, and let mac80211 handle the others in software. It is not necessary to use the module parameter NOHWCRYPT to turn hardware encryption off. Although this change essentially eliminates that module parameter, I am choosing to keep it for cases where the hardware is broken, and software encryption is required for all ciphers. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200526155909.5807-3-Larry.Finger@lwfinger.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-20b43: Fix connection problem with WPA3Larry Finger1-1/+1
commit 75d057bda1fbca6ade21378aa45db712e5f7d962 upstream. Since the driver was first introduced into the kernel, it has only handled the ciphers associated with WEP, WPA, and WPA2. It fails with WPA3 even though mac80211 can handle those additional ciphers in software, b43 did not report that it could handle them. By setting MFP_CAPABLE using ieee80211_set_hw(), the problem is fixed. With this change, b43 will handle the ciphers it knows in hardware, and let mac80211 handle the others in software. It is not necessary to use the module parameter NOHWCRYPT to turn hardware encryption off. Although this change essentially eliminates that module parameter, I am choosing to keep it for cases where the hardware is broken, and software encryption is required for all ciphers. Reported-and-tested-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200526155909.5807-2-Larry.Finger@lwfinger.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-20b43legacy: Fix case where channel status is corruptedLarry Finger1-0/+1
commit ec4d3e3a054578de34cd0b587ab8a1ac36f629d9 upstream. This patch fixes commit 75388acd0cd8 ("add mac80211-based driver for legacy BCM43xx devices") In https://bugzilla.kernel.org/show_bug.cgi?id=207093, a defect in b43legacy is reported. Upon testing, thus problem exists on PPC and X86 platforms, is present in the oldest kernel tested (3.2), and has been present in the driver since it was first added to the kernel. The problem is a corrupted channel status received from the device. Both the internal card in a PowerBook G4 and the PCMCIA version (Broadcom BCM4306 with PCI ID 14e4:4320) have the problem. Only Rev, 2 (revision 4 of the 802.11 core) of the chip has been tested. No other devices using b43legacy are available for testing. Various sources of the problem were considered. Buffer overrun and other sources of corruption within the driver were rejected because the faulty channel status is always the same, not a random value. It was concluded that the faulty data is coming from the device, probably due to a firmware bug. As that source is not available, the driver must take appropriate action to recover. At present, the driver reports the error, and them continues to process the bad packet. This is believed that to be a mistake, and the correct action is to drop the correpted packet. Fixes: 75388acd0cd8 ("add mac80211-based driver for legacy BCM43xx devices") Cc: Stable <stable@vger.kernel.org> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-and-tested by: F. Erhard <erhard_f@mailbox.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200407190043.1686-1-Larry.Finger@lwfinger.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-20carl9170: remove P2P_GO supportChristian Lamparter2-20/+5
commit b14fba7ebd04082f7767a11daea7f12f3593de22 upstream. This patch follows up on a bug-report by Frank Schäfer that discovered P2P GO wasn't working with wpa_supplicant. This patch removes part of the broken P2P GO support but keeps the vif switchover code in place. Cc: <stable@vger.kernel.org> Link: <https://lkml.kernel.org/r/3a9d86b6-744f-e670-8792-9167257edef8@googlemail.com> Reported-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200425092811.9494-1-chunkeey@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-20mwifiex: Fix memory corruption in dump_stationPali Rohár1-8/+6
[ Upstream commit 3aa42bae9c4d1641aeb36f1a8585cd1d506cf471 ] The mwifiex_cfg80211_dump_station() uses static variable for iterating over a linked list of all associated stations (when the driver is in UAP role). This has a race condition if .dump_station is called in parallel for multiple interfaces. This corruption can be triggered by registering multiple SSIDs and calling, in parallel for multiple interfaces iw dev <iface> station dump [16750.719775] Unable to handle kernel paging request at virtual address dead000000000110 ... [16750.899173] Call trace: [16750.901696] mwifiex_cfg80211_dump_station+0x94/0x100 [mwifiex] [16750.907824] nl80211_dump_station+0xbc/0x278 [cfg80211] [16750.913160] netlink_dump+0xe8/0x320 [16750.916827] netlink_recvmsg+0x1b4/0x338 [16750.920861] ____sys_recvmsg+0x7c/0x2b0 [16750.924801] ___sys_recvmsg+0x70/0x98 [16750.928564] __sys_recvmsg+0x58/0xa0 [16750.932238] __arm64_sys_recvmsg+0x28/0x30 [16750.936453] el0_svc_common.constprop.3+0x90/0x158 [16750.941378] do_el0_svc+0x74/0x90 [16750.944784] el0_sync_handler+0x12c/0x1a8 [16750.948903] el0_sync+0x114/0x140 [16750.952312] Code: f9400003 f907f423 eb02007f 54fffd60 (b9401060) [16750.958583] ---[ end trace c8ad181c2f4b8576 ]--- This patch drops the use of the static iterator, and instead every time the function is called iterates to the idx-th position of the linked-list. It would be better to convert the code not to use linked list for associated stations storage (since the chip has a limited number of associated stations anyway - it could just be an array). Such a change may be proposed in the future. In the meantime this patch can backported into stable kernels in this simple form. Fixes: 8baca1a34d4c ("mwifiex: dump station support in uap mode") Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200515075924.13841-1-pali@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-20rtlwifi: Fix a double free in _rtl_usb_tx_urb_setup()Dan Carpenter1-6/+2
[ Upstream commit beb12813bc75d4a23de43b85ad1c7cb28d27631e ] Seven years ago we tried to fix a leak but actually introduced a double free instead. It was an understandable mistake because the code was a bit confusing and the free was done in the wrong place. The "skb" pointer is freed in both _rtl_usb_tx_urb_setup() and _rtl_usb_transmit(). The free belongs _rtl_usb_transmit() instead of _rtl_usb_tx_urb_setup() and I've cleaned the code up a bit to hopefully make it more clear. Fixes: 36ef0b473fbf ("rtlwifi: usb: add missing freeing of skbuff") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200513093951.GD347693@mwanda Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-20wcn36xx: Fix error handling path in 'wcn36xx_probe()'Christophe JAILLET1-2/+4
[ Upstream commit a86308fc534edeceaf64670c691e17485436a4f4 ] In case of error, 'qcom_wcnss_open_channel()' must be undone by a call to 'rpmsg_destroy_ept()', as already done in the remove function. Fixes: 5052de8deff5 ("soc: qcom: smd: Transition client drivers from smd to rpmsg") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200507043619.200051-1-christophe.jaillet@wanadoo.fr Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-20brcmfmac: fix wrong location to get firmware featureJaehoon Chung1-1/+2
[ Upstream commit c57673852062428cdeabdd6501ac8b8e4c302067 ] sup_wpa feature is getting after setting feature_disable flag. If firmware is supported sup_wpa feature, it's always enabled regardless of feature_disable flag. Fixes: b8a64f0e96c2 ("brcmfmac: support 4-way handshake offloading for WPA/WPA2-PSK") Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200330052528.10503-1-jh80.chung@samsung.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-20ath9k: Fix general protection fault in ath9k_hif_usb_rx_cbQiujun Huang2-11/+42
commit 2bbcaaee1fcbd83272e29f31e2bb7e70d8c49e05 upstream. In ath9k_hif_usb_rx_cb interface number is assumed to be 0. usb_ifnum_to_if(urb->dev, 0) But it isn't always true. The case reported by syzbot: https://lore.kernel.org/linux-usb/000000000000666c9c05a1c05d12@google.com usb 2-1: new high-speed USB device number 2 using dummy_hcd usb 2-1: config 1 has an invalid interface number: 2 but max is 0 usb 2-1: config 1 has no interface number 0 usb 2-1: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice= 1.08 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 general protection fault, probably for non-canonical address 0xdffffc0000000015: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc5-syzkaller #0 Call Trace __usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650 usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716 dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966 call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786 __do_softirq+0x21e/0x950 kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x178/0x1a0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:546 [inline] smp_apic_timer_interrupt+0x141/0x540 arch/x86/kernel/apic/apic.c:1146 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829 Reported-and-tested-by: syzbot+40d5d2e8a4680952f042@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200404041838.10426-6-hqjagain@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-20ath9x: Fix stack-out-of-bounds Write in ath9k_hif_usb_rx_cbQiujun Huang1-0/+5
commit 19d6c375d671ce9949a864fb9a03e19f5487b4d3 upstream. Add barrier to accessing the stack array skb_pool. The case reported by syzbot: https://lore.kernel.org/linux-usb/0000000000003d7c1505a2168418@google.com BUG: KASAN: stack-out-of-bounds in ath9k_hif_usb_rx_stream drivers/net/wireless/ath/ath9k/hif_usb.c:626 [inline] BUG: KASAN: stack-out-of-bounds in ath9k_hif_usb_rx_cb+0xdf6/0xf70 drivers/net/wireless/ath/ath9k/hif_usb.c:666 Write of size 8 at addr ffff8881db309a28 by task swapper/1/0 Call Trace: ath9k_hif_usb_rx_stream drivers/net/wireless/ath/ath9k/hif_usb.c:626 [inline] ath9k_hif_usb_rx_cb+0xdf6/0xf70 drivers/net/wireless/ath/ath9k/hif_usb.c:666 __usb_hcd_giveback_urb+0x1f2/0x470 drivers/usb/core/hcd.c:1648 usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1713 dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966 call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786 Reported-and-tested-by: syzbot+d403396d4df67ad0bd5f@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200404041838.10426-5-hqjagain@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-20ath9k: Fix use-after-free Write in ath9k_htc_rx_msgQiujun Huang1-0/+3
commit e4ff08a4d727146bb6717a39a8d399d834654345 upstream. Write out of slab bounds. We should check epid. The case reported by syzbot: https://lore.kernel.org/linux-usb/0000000000006ac55b05a1c05d72@google.com BUG: KASAN: use-after-free in htc_process_conn_rsp drivers/net/wireless/ath/ath9k/htc_hst.c:131 [inline] BUG: KASAN: use-after-free in ath9k_htc_rx_msg+0xa25/0xaf0 drivers/net/wireless/ath/ath9k/htc_hst.c:443 Write of size 2 at addr ffff8881cea291f0 by task swapper/1/0 Call Trace: htc_process_conn_rsp drivers/net/wireless/ath/ath9k/htc_hst.c:131 [inline] ath9k_htc_rx_msg+0xa25/0xaf0 drivers/net/wireless/ath/ath9k/htc_hst.c:443 ath9k_hif_usb_reg_in_cb+0x1ba/0x630 drivers/net/wireless/ath/ath9k/hif_usb.c:718 __usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650 usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716 dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966 call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786 Reported-and-tested-by: syzbot+b1c61e5f11be5782f192@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200404041838.10426-4-hqjagain@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-20ath9k: Fix use-after-free Read in ath9k_wmi_ctrl_rxQiujun Huang5-7/+17
commit abeaa85054ff8cfe8b99aafc5c70ea067e5d0908 upstream. Free wmi later after cmd urb has been killed, as urb cb will access wmi. the case reported by syzbot: https://lore.kernel.org/linux-usb/0000000000000002fc05a1d61a68@google.com BUG: KASAN: use-after-free in ath9k_wmi_ctrl_rx+0x416/0x500 drivers/net/wireless/ath/ath9k/wmi.c:215 Read of size 1 at addr ffff8881cef1417c by task swapper/1/0 Call Trace: <IRQ> ath9k_wmi_ctrl_rx+0x416/0x500 drivers/net/wireless/ath/ath9k/wmi.c:215 ath9k_htc_rx_msg+0x2da/0xaf0 drivers/net/wireless/ath/ath9k/htc_hst.c:459 ath9k_hif_usb_reg_in_cb+0x1ba/0x630 drivers/net/wireless/ath/ath9k/hif_usb.c:718 __usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650 usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716 dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966 call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786 Reported-and-tested-by: syzbot+5d338854440137ea0fef@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200404041838.10426-3-hqjagain@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-20ath9k_htc: Silence undersized packet warningsMasashi Honma1-3/+3
[ Upstream commit 450edd2805982d14ed79733a82927d2857b27cac ] Some devices like TP-Link TL-WN722N produces this kind of messages frequently. kernel: ath: phy0: Short RX data len, dropping (dlen: 4) This warning is useful for developers to recognize that the device (Wi-Fi dongle or USB hub etc) is noisy but not for general users. So this patch make this warning to debug message. Reported-By: Denis <pro.denis@protonmail.com> Ref: https://bugzilla.kernel.org/show_bug.cgi?id=207539 Fixes: cd486e627e67 ("ath9k_htc: Discard undersized packets") Signed-off-by: Masashi Honma <masashi.honma@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200504214443.4485-1-masashi.honma@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-11airo: Fix read overflows sending packetsDan Carpenter1-0/+12
commit 11e7a91994c29da96d847f676be023da6a2c1359 upstream. The problem is that we always copy a minimum of ETH_ZLEN (60) bytes from skb->data even when skb->len is less than ETH_ZLEN so it leads to a read overflow. The fix is to pad skb->data to at least ETH_ZLEN bytes. Cc: <stable@vger.kernel.org> Reported-by: Hu Jiahui <kirin.say@gmail.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200527184830.GA1164846@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-11p54usb: add AirVasT USB stick device-idGiuseppe Marco Randazzo1-0/+1
commit 63e49a9fdac1b4e97ac26cb3fe953f210d83bc53 upstream. This patch adds the AirVasT USB wireless devices 124a:4026 to the list of supported devices. It's using the ISL3886 usb firmware. Without this modification, the wiki adapter is not recognized. Cc: <stable@vger.kernel.org> Signed-off-by: Giuseppe Marco Randazzo <gmrandazzo@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [formatted, reworded] Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200405220659.45621-1-chunkeey@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-02iwlwifi: pcie: actually release queue memory in TVQMJohannes Berg1-0/+3
commit b98b33d5560a2d940f3b80f6768a6177bf3dfbc0 upstream. The iwl_trans_pcie_dyn_txq_free() function only releases the frames that may be left on the queue by calling iwl_pcie_gen2_txq_unmap(), but doesn't actually free the DMA ring or byte-count tables for the queue. This leads to pretty large memory leaks (at least before my queue size improvements), in particular in monitor/sniffer mode on channel hopping since this happens on every channel change. This was also now more evident after the move to a DMA pool for the byte count tables, showing messages such as BUG iwlwifi:bc (...): Objects remaining in iwlwifi:bc on __kmem_cache_shutdown() This fixes https://bugzilla.kernel.org/show_bug.cgi?id=206811. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Fixes: 6b35ff91572f ("iwlwifi: pcie: introduce a000 TX queues management") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20200417100405.f5f4c4193ec1.Id5feebc9b4318041913a9c89fc1378bb5454292c@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24wil6210: abort properly in cfg suspendHamad Kadmany1-2/+5
[ Upstream commit 144a12a6d83f3ca34ddefce5dee4d502afd2fc5b ] On-going operations were not aborted properly and required locks were not taken. Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24wil6210: fix length check in __wmi_sendLior David2-2/+22
[ Upstream commit 26a6d5274865532502c682ff378ac8ebe2886238 ] The current length check: sizeof(cmd) + len > r->entry_size will allow very large values of len (> U16_MAX - sizeof(cmd)) and can cause a buffer overflow. Fix the check to cover this case. In addition, ensure the mailbox entry_size is not too small, since this can also bypass the above check. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24wil6210: add block size checks during FW loadLior David3-21/+49
[ Upstream commit 705d2fde94b23cd76efbeedde643ffa7c32fac7f ] When loading FW from file add block size checks to ensure a corrupted FW file will not cause the driver to write outside the device memory. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24wil6210: fix PCIe bus mastering in case of interface downLazar Alexei3-19/+19
[ Upstream commit 680c242dc25e036265793edc7d755cfc15afd231 ] In case of interface down, radio is turned off but PCIe mastering is not cleared. This can cause unexpected PCIe access to the shutdown device. Fix this by clearing PCIe mastering also in case interface is down Signed-off-by: Lazar Alexei <qca_ailizaro@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24wil6210: rate limit wil_rx_refill errorDedy Lansky1-2/+2
[ Upstream commit 3d6b72729cc2933906de8d2c602ae05e920b2122 ] wil_err inside wil_rx_refill can flood the log buffer. Replace it with wil_err_ratelimited. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24wil6210: fix temperature debugfsDedy Lansky1-3/+4
[ Upstream commit 6d9eb7ebae3d7e951bc0999235ae7028eb4cae4f ] For negative temperatures, "temp" debugfs is showing wrong values. Use signed types so proper calculations is done for sub zero temperatures. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24wil6210: increase firmware ready timeoutHamad Kadmany1-1/+1
[ Upstream commit 6ccae584014ef7074359eb4151086beef66ecfa9 ] Firmware ready event may take longer than current timeout in some scenarios, for example with multiple RFs connected where each requires an initial calibration. Increase the timeout to support these scenarios. Signed-off-by: Hamad Kadmany <hkadmany@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24mac80211_hwsim: Use kstrndup() in place of kasprintf()Tuomas Tynkkynen1-6/+6
commit 7ea862048317aa76d0f22334202779a25530980c upstream. syzbot reports a warning: precision 33020 too large WARNING: CPU: 0 PID: 9618 at lib/vsprintf.c:2471 set_precision+0x150/0x180 lib/vsprintf.c:2471 vsnprintf+0xa7b/0x19a0 lib/vsprintf.c:2547 kvasprintf+0xb2/0x170 lib/kasprintf.c:22 kasprintf+0xbb/0xf0 lib/kasprintf.c:59 hwsim_del_radio_nl+0x63a/0x7e0 drivers/net/wireless/mac80211_hwsim.c:3625 genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline] ... entry_SYSCALL_64_after_hwframe+0x49/0xbe Thus it seems that kasprintf() with "%.*s" format can not be used for duplicating a string with arbitrary length. Replace it with kstrndup(). Note that later this string is limited to NL80211_WIPHY_NAME_MAXLEN == 64, but the code is simpler this way. Reported-by: syzbot+6693adf1698864d21734@syzkaller.appspotmail.com Reported-by: syzbot+a4aee3f42d7584d76761@syzkaller.appspotmail.com Cc: stable@kernel.org Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Link: https://lore.kernel.org/r/20200410123257.14559-1-tuomas.tynkkynen@iki.fi [johannes: add note about length limit] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24ath9k: Handle txpower changes even when TPC is disabledRemi Pommarel1-0/+3
commit 968ae2caad0782db5dbbabb560d3cdefd2945d38 upstream. When TPC is disabled IEEE80211_CONF_CHANGE_POWER event can be handled to reconfigure HW's maximum txpower. This fixes 0dBm txpower setting when user attaches to an interface for the first time with the following scenario: ieee80211_do_open() ath9k_add_interface() ath9k_set_txpower() /* Set TX power with not yet initialized sc->hw->conf.power_level */ ieee80211_hw_config() /* Iniatilize sc->hw->conf.power_level and raise IEEE80211_CONF_CHANGE_POWER */ ath9k_config() /* IEEE80211_CONF_CHANGE_POWER is ignored */ This issue can be reproduced with the following: $ modprobe -r ath9k $ modprobe ath9k $ wpa_supplicant -i wlan0 -c /tmp/wpa.conf & $ iw dev /* Here TX power is either 0 or 3 depending on RF chain */ $ killall wpa_supplicant $ iw dev /* TX power goes back to calibrated value and subsequent calls will be fine */ Fixes: 283dd11994cde ("ath9k: add per-vif TX power capability") Cc: stable@vger.kernel.org Signed-off-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-20iwlwifi: mvm: Do not require PHY_SKU NVM section for 3168 devicesDan Moulding1-1/+2
commit a9149d243f259ad8f02b1e23dfe8ba06128f15e1 upstream. The logic for checking required NVM sections was recently fixed in commit b3f20e098293 ("iwlwifi: mvm: fix NVM check for 3168 devices"). However, with that fixed the else is now taken for 3168 devices and within the else clause there is a mandatory check for the PHY_SKU section. This causes the parsing to fail for 3168 devices. The PHY_SKU section is really only mandatory for the IWL_NVM_EXT layout (the phy_sku parameter of iwl_parse_nvm_data is only used when the NVM type is IWL_NVM_EXT). So this changes the PHY_SKU section check so that it's only mandatory for IWL_NVM_EXT. Fixes: b3f20e098293 ("iwlwifi: mvm: fix NVM check for 3168 devices") Signed-off-by: Dan Moulding <dmoulding@me.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11mwifiex: drop most magic numbers from mwifiex_process_tdls_action_frame()Brian Norris1-47/+28
commit 70e5b8f445fd27fde0c5583460e82539a7242424 upstream. Before commit 1e58252e334d ("mwifiex: Fix heap overflow in mmwifiex_process_tdls_action_frame()"), mwifiex_process_tdls_action_frame() already had too many magic numbers. But this commit just added a ton more, in the name of checking for buffer overflows. That seems like a really bad idea. Let's make these magic numbers a little less magic, by (a) factoring out 'pos[1]' as 'ie_len' (b) using 'sizeof' on the appropriate source or destination fields where possible, instead of bare numbers (c) dropping redundant checks, per below. Regarding redundant checks: the beginning of the loop has this: if (pos + 2 + pos[1] > end) break; but then individual 'case's include stuff like this: if (pos > end - 3) return; if (pos[1] != 1) return; Note that the second 'return' (validating the length, pos[1]) combined with the above condition (ensuring 'pos + 2 + length' doesn't exceed 'end'), makes the first 'return' (whose 'if' can be reworded as 'pos > end - pos[1] - 2') redundant. Rather than unwind the magic numbers there, just drop those conditions. Fixes: 1e58252e334d ("mwifiex: Fix heap overflow in mmwifiex_process_tdls_action_frame()") Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11iwlwifi: pcie: fix rb_allocator workqueue allocationJohannes Berg1-4/+11
commit 8188a18ee2e48c9a7461139838048363bfce3fef upstream We don't handle failures in the rb_allocator workqueue allocation correctly. To fix that, move the code earlier so the cleanup is easier and we don't have to undo all the interrupt allocations in this case. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> [Ajay: Modified to apply on v4.19.y and v4.14.y] Signed-off-by: Ajay Kaher <akaher@vmware.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-28iwlwifi: mvm: Fix thermal zone registrationAndrei Otcheretianski1-1/+3
[ Upstream commit baa6cf8450b72dcab11f37c47efce7c5b9b8ad0f ] Use a unique name when registering a thermal zone. Otherwise, with multiple NICS, we hit the following warning during the unregistration. WARNING: CPU: 2 PID: 3525 at fs/sysfs/group.c:255 RIP: 0010:sysfs_remove_group+0x80/0x90 Call Trace: dpm_sysfs_remove+0x57/0x60 device_del+0x5a/0x350 ? sscanf+0x4e/0x70 device_unregister+0x1a/0x60 hwmon_device_unregister+0x4a/0xa0 thermal_remove_hwmon_sysfs+0x175/0x1d0 thermal_zone_device_unregister+0x188/0x1e0 iwl_mvm_thermal_exit+0xe7/0x100 [iwlmvm] iwl_op_mode_mvm_stop+0x27/0x180 [iwlmvm] _iwl_op_mode_stop.isra.3+0x2b/0x50 [iwlwifi] iwl_opmode_deregister+0x90/0xa0 [iwlwifi] __exit_compat+0x10/0x2c7 [iwlmvm] __x64_sys_delete_module+0x13f/0x270 do_syscall_64+0x5a/0x110 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-28iwlegacy: ensure loop counter addr does not wrap and cause an infinite loopColin Ian King1-1/+1
[ Upstream commit c2f9a4e4a5abfc84c01b738496b3fd2d471e0b18 ] The loop counter addr is a u16 where as the upper limit of the loop is an int. In the unlikely event that the il->cfg->eeprom_size is greater than 64K then we end up with an infinite loop since addr will wrap around an never reach upper loop limit. Fix this by making addr an int. Addresses-Coverity: ("Infinite loop") Fixes: be663ab67077 ("iwlwifi: split the drivers for agn and legacy devices 3945/4965") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-28hostap: Adjust indentation in prism2_hostapd_add_staNathan Chancellor1-1/+1
[ Upstream commit b61156fba74f659d0bc2de8f2dbf5bad9f4b8faf ] Clang warns: ../drivers/net/wireless/intersil/hostap/hostap_ap.c:2511:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] if (sta->tx_supp_rates & WLAN_RATE_5M5) ^ ../drivers/net/wireless/intersil/hostap/hostap_ap.c:2509:2: note: previous statement is here if (sta->tx_supp_rates & WLAN_RATE_2M) ^ 1 warning generated. This warning occurs because there is a space before the tab on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. Fixes: ff1d2767d5a4 ("Add HostAP wireless driver.") Link: https://github.com/ClangBuiltLinux/linux/issues/813 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-28orinoco: avoid assertion in case of NULL pointerAditya Pakki1-1/+2
[ Upstream commit c705f9fc6a1736dcf6ec01f8206707c108dca824 ] In ezusb_init, if upriv is NULL, the code crashes. However, the caller in ezusb_probe can handle the error and print the failure message. The patch replaces the BUG_ON call to error return. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-28rtlwifi: rtl_pci: Fix -Wcast-function-typePhong Tran1-4/+6
[ Upstream commit cb775c88da5d48a85d99d95219f637b6fad2e0e9 ] correct usage prototype of callback in tasklet_init(). Report by https://github.com/KSPP/linux/issues/20 Signed-off-by: Phong Tran <tranmanphong@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-28iwlegacy: Fix -Wcast-function-typePhong Tran2-4/+6
[ Upstream commit da5e57e8a6a3e69dac2937ba63fa86355628fbb2 ] correct usage prototype of callback in tasklet_init(). Report by https://github.com/KSPP/linux/issues/20 Signed-off-by: Phong Tran <tranmanphong@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-28ipw2x00: Fix -Wcast-function-typePhong Tran2-5/+7
[ Upstream commit ebd77feb27e91bb5fe35a7818b7c13ea7435fb98 ] correct usage prototype of callback in tasklet_init(). Report by https://github.com/KSPP/linux/issues/20 Signed-off-by: Phong Tran <tranmanphong@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-28b43legacy: Fix -Wcast-function-typePhong Tran1-2/+3
[ Upstream commit 475eec112e4267232d10f4afe2f939a241692b6c ] correct usage prototype of callback in tasklet_init(). Report by https://github.com/KSPP/linux/issues/20 Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Phong Tran <tranmanphong@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-28brcmfmac: Fix use after free in brcmf_sdio_readframes()Dan Carpenter1-0/+1
[ Upstream commit 216b44000ada87a63891a8214c347e05a4aea8fe ] The brcmu_pkt_buf_free_skb() function frees "pkt" so it leads to a static checker warning: drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:1974 brcmf_sdio_readframes() error: dereferencing freed memory 'pkt' It looks like there was supposed to be a continue after we free "pkt". Fixes: 4754fceeb9a6 ("brcmfmac: streamline SDIO read frame routine") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-15libertas: make lbs_ibss_join_existing() return error code on rates overflowNicolai Stange1-0/+1
[ Upstream commit 1754c4f60aaf1e17d886afefee97e94d7f27b4cb ] Commit e5e884b42639 ("libertas: Fix two buffer overflows at parsing bss descriptor") introduced a bounds check on the number of supplied rates to lbs_ibss_join_existing() and made it to return on overflow. However, the aforementioned commit doesn't set the return value accordingly and thus, lbs_ibss_join_existing() would return with zero even though it failed. Make lbs_ibss_join_existing return -EINVAL in case the bounds check on the number of supplied rates fails. Fixes: e5e884b42639 ("libertas: Fix two buffer overflows at parsing bss descriptor") Signed-off-by: Nicolai Stange <nstange@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-15libertas: don't exit from lbs_ibss_join_existing() with RCU read lock heldNicolai Stange1-0/+1
[ Upstream commit c7bf1fb7ddca331780b9a733ae308737b39f1ad4 ] Commit e5e884b42639 ("libertas: Fix two buffer overflows at parsing bss descriptor") introduced a bounds check on the number of supplied rates to lbs_ibss_join_existing(). Unfortunately, it introduced a return path from within a RCU read side critical section without a corresponding rcu_read_unlock(). Fix this. Fixes: e5e884b42639 ("libertas: Fix two buffer overflows at parsing bss descriptor") Signed-off-by: Nicolai Stange <nstange@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-15mwifiex: Fix possible buffer overflows in mwifiex_cmd_append_vsie_tlv()Qing Xu1-0/+7
[ Upstream commit b70261a288ea4d2f4ac7cd04be08a9f0f2de4f4d ] mwifiex_cmd_append_vsie_tlv() calls memcpy() without checking the destination size may trigger a buffer overflower, which a local user could use to cause denial of service or the execution of arbitrary code. Fix it by putting the length check before calling memcpy(). Signed-off-by: Qing Xu <m1s5p6688@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-15mwifiex: Fix possible buffer overflows in mwifiex_ret_wmm_get_status()Qing Xu1-0/+4
[ Upstream commit 3a9b153c5591548612c3955c9600a98150c81875 ] mwifiex_ret_wmm_get_status() calls memcpy() without checking the destination size.Since the source is given from remote AP which contains illegal wmm elements , this may trigger a heap buffer overflow. Fix it by putting the length check before calling memcpy(). Signed-off-by: Qing Xu <m1s5p6688@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-15mwifiex: fix unbalanced locking in mwifiex_process_country_ie()Brian Norris1-0/+1
commit 65b1aae0d9d5962faccc06bdb8e91a2a0b09451c upstream. We called rcu_read_lock(), so we need to call rcu_read_unlock() before we return. Fixes: 3d94a4a8373b ("mwifiex: fix possible heap overflow in mwifiex_process_country_ie()") Cc: stable@vger.kernel.org Cc: huangwen <huangwenabc@gmail.com> Cc: Ganapathi Bhat <ganapathi.bhat@nxp.com> Signed-off-by: Brian Norris <briannorris@chromium.org> Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-15iwlwifi: don't throw error when trying to remove IGTKLuca Coelho1-3/+7
commit 197288d5ba8a5289f22d3aeb4fca3824bfd9b4af upstream. The IGTK keys are only removed by mac80211 after it has already removed the AP station. This causes the driver to throw an error because mac80211 is trying to remove the IGTK when the station doesn't exist anymore. The firmware is aware that the station has been removed and can deal with it the next time we try to add an IGTK for a station, so we shouldn't try to remove the key if the station ID is IWL_MVM_INVALID_STA. Do this by removing the check for mvm_sta before calling iwl_mvm_send_sta_igtk() and check return from that function gracefully if the station ID is invalid. Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-15brcmfmac: Fix memory leak in brcmf_usbdev_qinitNavid Emamdoost1-0/+1
commit 4282dc057d750c6a7dd92953564b15c26b54c22c upstream. In the implementation of brcmf_usbdev_qinit() the allocated memory for reqs is leaking if usb_alloc_urb() fails. Release reqs in the error handling path. Fixes: 71bb244ba2fd ("brcm80211: fmac: add USB support for bcm43235/6/8 chipsets") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-15iwlwifi: mvm: fix NVM check for 3168 devicesLuca Coelho1-1/+1
[ Upstream commit b3f20e098293892388d6a0491d6bbb2efb46fbff ] We had a check on !NVM_EXT and then a check for NVM_SDP in the else block of this if. The else block, obviously, could only be reached if using NVM_EXT, so it would never be NVM_SDP. Fix that by checking whether the nvm_type is IWL_NVM instead of checking for !IWL_NVM_EXT to solve this issue. Reported-by: Stefan Sperling <stsp@stsp.name> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-05airo: Add missing CAP_NET_ADMIN check in AIROOLDIOCTL/SIOCDEVPRIVATEMichael Ellerman1-10/+8
[ Upstream commit 78f7a7566f5eb59321e99b55a6fdb16ea05b37d1 ] The driver for Cisco Aironet 4500 and 4800 series cards (airo.c), implements AIROOLDIOCTL/SIOCDEVPRIVATE in airo_ioctl(). The ioctl handler copies an aironet_ioctl struct from userspace, which includes a command. Some of the commands are handled in readrids(), where the user controlled command is converted into a driver-internal value called "ridcode". There are two command values, AIROGWEPKTMP and AIROGWEPKNV, which correspond to ridcode values of RID_WEP_TEMP and RID_WEP_PERM respectively. These commands both have checks that the user has CAP_NET_ADMIN, with the comment that "Only super-user can read WEP keys", otherwise they return -EPERM. However there is another command value, AIRORRID, that lets the user specify the ridcode value directly, with no other checks. This means the user can bypass the CAP_NET_ADMIN check on AIROGWEPKTMP and AIROGWEPKNV. Fix it by moving the CAP_NET_ADMIN check out of the command handling and instead do it later based on the ridcode. That way regardless of whether the ridcode is set via AIROGWEPKTMP or AIROGWEPKNV, or passed in using AIRORID, we always do the CAP_NET_ADMIN check. Found by Ilja by code inspection, not tested as I don't have the required hardware. Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-05airo: Fix possible info leak in AIROOLDIOCTL/SIOCDEVPRIVATEMichael Ellerman1-1/+1
[ Upstream commit d6bce2137f5d6bb1093e96d2f801479099b28094 ] The driver for Cisco Aironet 4500 and 4800 series cards (airo.c), implements AIROOLDIOCTL/SIOCDEVPRIVATE in airo_ioctl(). The ioctl handler copies an aironet_ioctl struct from userspace, which includes a command and a length. Some of the commands are handled in readrids(), which kmalloc()'s a buffer of RIDSIZE (2048) bytes. That buffer is then passed to PC4500_readrid(), which has two cases. The else case does some setup and then reads up to RIDSIZE bytes from the hardware into the kmalloc()'ed buffer. Here len == RIDSIZE, pBuf is the kmalloc()'ed buffer: // read the rid length field bap_read(ai, pBuf, 2, BAP1); // length for remaining part of rid len = min(len, (int)le16_to_cpu(*(__le16*)pBuf)) - 2; ... // read remainder of the rid rc = bap_read(ai, ((__le16*)pBuf)+1, len, BAP1); PC4500_readrid() then returns to readrids() which does: len = comp->len; if (copy_to_user(comp->data, iobuf, min(len, (int)RIDSIZE))) { Where comp->len is the user controlled length field. So if the "rid length field" returned by the hardware is < 2048, and the user requests 2048 bytes in comp->len, we will leak the previous contents of the kmalloc()'ed buffer to userspace. Fix it by kzalloc()'ing the buffer. Found by Ilja by code inspection, not tested as I don't have the required hardware. Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-05rsi: fix use-after-free on probe errorsJohan Hovold1-6/+6
commit 92aafe77123ab478e5f5095878856ab0424910da upstream. The driver would fail to stop the command timer in most error paths, something which specifically could lead to the timer being freed while still active on I/O errors during probe. Fix this by making sure that each function starting the timer also stops it in all relevant error paths. Reported-by: syzbot+1d1597a5aa3679c65b9f@syzkaller.appspotmail.com Fixes: b78e91bcfb33 ("rsi: Add new firmware loading method") Cc: stable <stable@vger.kernel.org> # 4.12 Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-05zd1211rw: fix storage endpoint lookupJohan Hovold1-1/+1
commit 2d68bb2687abb747558b933e80845ff31570a49c upstream. Make sure to use the current alternate setting when verifying the storage interface descriptors to avoid submitting an URB to an invalid endpoint. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: a1030e92c150 ("[PATCH] zd1211rw: Convert installer CDROM device into WLAN device") Cc: stable <stable@vger.kernel.org> # 2.6.19 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-27 06:51:34 +0300