summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2017-10-27rtlwifi: rtl8821ae: Fix connection lost problemLarry Finger1-1/+1
commit b8b8b16352cd90c6083033fd4487f04fae935c18 upstream. In commit 40b368af4b75 ("rtlwifi: Fix alignment issues"), the read of REG_DBI_READ was changed from 16 to 8 bits. For unknown reasonsi this change results in reduced stability for the wireless connection. This regression was located using bisection. Fixes: 40b368af4b75 ("rtlwifi: Fix alignment issues") Reported-and-tested-by: James Cameron <quozl@laptop.org> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-27brcmsmac: make some local variables 'static const' to reduce stack sizeArnd Bergmann1-100/+97
commit c503dd38f850be28867ef7a42d9abe5ade81a9bd upstream. With KASAN and a couple of other patches applied, this driver is one of the few remaining ones that actually use more than 2048 bytes of kernel stack: broadcom/brcm80211/brcmsmac/phy/phy_n.c: In function 'wlc_phy_workarounds_nphy_gainctrl': broadcom/brcm80211/brcmsmac/phy/phy_n.c:16065:1: warning: the frame size of 3264 bytes is larger than 2048 bytes [-Wframe-larger-than=] broadcom/brcm80211/brcmsmac/phy/phy_n.c: In function 'wlc_phy_workarounds_nphy': broadcom/brcm80211/brcmsmac/phy/phy_n.c:17138:1: warning: the frame size of 2864 bytes is larger than 2048 bytes [-Wframe-larger-than=] Here, I'm reducing the stack size by marking as many local variables as 'static const' as I can without changing the actual code. This is the first of three patches to improve the stack usage in this driver. It would be good to have this backported to stabl kernels to get all drivers in 'allmodconfig' below the 2048 byte limit so we can turn on the frame warning again globally, but I realize that the patch is larger than the normal limit for stable backports. The other two patches do not need to be backported. Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-27brcmfmac: Add check for short event packetsKevin Cernekee1-1/+2
commit dd2349121bb1b8ff688c3ca6a2a0bea9d8c142ca upstream. The length of the data in the received skb is currently passed into brcmf_fweh_process_event() as packet_len, but this value is not checked. event_packet should be followed by DATALEN bytes of additional event data. Ensure that the received packet actually contains at least DATALEN bytes of additional data, to avoid copying uninitialized memory into event->data. Suggested-by: Mattias Nissler <mnissler@chromium.org> Signed-off-by: Kevin Cernekee <cernekee@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12brcmfmac: setup passive scan if requested by user-spaceArend Van Spriel2-15/+9
commit 35f62727df0ed8e5e4857e162d94fd46d861f1cf upstream. The driver was not properly configuring firmware with regard to the type of scan. It always performed an active scan even when user-space was requesting for passive scan, ie. the scan request was done without any SSIDs specified. Reported-by: Huang, Jiangyang <Jiangyang.Huang@itron.com> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12brcmfmac: add length check in brcmf_cfg80211_escan_handler()Arend Van Spriel1-3/+15
commit 17df6453d4be17910456e99c5a85025aa1b7a246 upstream. Upon handling the firmware notification for scans the length was checked properly and may result in corrupting kernel heap memory due to buffer overruns. This fix addresses CVE-2017-0786. Cc: Kevin Cernekee <cernekee@chromium.org> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12iwlwifi: mvm: use IWL_HCMD_NOCOPY for MCAST_FILTER_CMDLuca Coelho1-1/+9
commit 97bce57bd7f96e1218751996f549a6e61f18cc8c upstream. The MCAST_FILTER_CMD can get quite large when we have many mcast addresses to set (we support up to 255). So the command should be send as NOCOPY to prevent a warning caused by too-long commands: WARNING: CPU: 0 PID: 9700 at /root/iwlwifi/stack-dev/drivers/net/wireless/intel/iwlwifi/pcie/tx.c:1550 iwl_pcie_enqueue_hcmd+0x8c7/0xb40 [iwlwifi] Command MCAST_FILTER_CMD (0x1d0) is too large (328 bytes) This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=196743 Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-05mac80211_hwsim: Use proper TX powerBeni Lev1-2/+0
commit 9de981f507474f326e42117858dc9a9321331ae5 upstream. In struct ieee80211_tx_info, control.vif pointer and rate_driver_data[0] falls on the same place, depending on the union usage. During the whole TX process, the union is referred to as a control struct, which holds the vif that is later used in the tx flow, especially in order to derive the used tx power. Referring direcly to rate_driver_data[0] and assigning a value to it, overwrites the vif pointer, hence making all later references irrelevant. Moreover, rate_driver_data[0] isn't used later in the flow in order to retrieve the channel that it is pointing to. Signed-off-by: Beni Lev <beni.lev@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-27iwlwifi: add workaround to disable wide channels in 5GHzLuca Coelho3-12/+56
commit 01a9c948a09348950515bf2abb6113ed83e696d8 upstream. The OTP in some SKUs have erroneously allowed 40MHz and 80MHz channels in the 5.2GHz band. The firmware has been modified to not allow this in those SKUs, so the driver needs to do the same otherwise the firmware will assert when we try to use it. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-27wcn36xx: Introduce mutual exclusion of fw configurationBjorn Andersson2-2/+53
commit 39efc7cc7ccf82d1cd946580cdb70760f347305a upstream. As the association status changes the driver needs to configure the hardware. This is done based on information in the "sta" acquired by ieee80211_find_sta(), which requires the caller to ensure that the "sta" is valid while its being used; generally by entering an rcu read section. But the operations acting on the "sta" has to communicate with the firmware and may therefor sleep, resulting in the following report: [ 31.418190] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238 [ 31.425919] in_atomic(): 0, irqs_disabled(): 0, pid: 34, name: kworker/u8:1 [ 31.434609] CPU: 0 PID: 34 Comm: kworker/u8:1 Tainted: G W 4.12.0-rc4-next-20170607+ #993 [ 31.441002] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) [ 31.450380] Workqueue: phy0 ieee80211_iface_work [ 31.457226] Call trace: [ 31.461830] [<ffffff8008088c58>] dump_backtrace+0x0/0x260 [ 31.464004] [<ffffff8008088f7c>] show_stack+0x14/0x20 [ 31.469557] [<ffffff8008392e70>] dump_stack+0x98/0xb8 [ 31.474592] [<ffffff80080e4330>] ___might_sleep+0xf0/0x118 [ 31.479626] [<ffffff80080e43a8>] __might_sleep+0x50/0x88 [ 31.485010] [<ffffff80088ff9a4>] mutex_lock+0x24/0x60 [ 31.490479] [<ffffff8008595c38>] wcn36xx_smd_set_link_st+0x30/0x130 [ 31.495428] [<ffffff8008591ed8>] wcn36xx_bss_info_changed+0x148/0x448 [ 31.501504] [<ffffff80088ab3c4>] ieee80211_bss_info_change_notify+0xbc/0x118 [ 31.508102] [<ffffff80088f841c>] ieee80211_assoc_success+0x664/0x7f8 [ 31.515220] [<ffffff80088e13d4>] ieee80211_rx_mgmt_assoc_resp+0x144/0x2d8 [ 31.521555] [<ffffff80088e1e20>] ieee80211_sta_rx_queued_mgmt+0x190/0x698 [ 31.528239] [<ffffff80088bc44c>] ieee80211_iface_work+0x234/0x368 [ 31.535011] [<ffffff80080d81ac>] process_one_work+0x1cc/0x340 [ 31.541086] [<ffffff80080d8368>] worker_thread+0x48/0x430 [ 31.546814] [<ffffff80080de448>] kthread+0x108/0x138 [ 31.552195] [<ffffff8008082ec0>] ret_from_fork+0x10/0x50 In order to ensure that the "sta" remains alive (and consistent) for the duration of bss_info_changed() mutual exclusion has to be ensured with sta_remove(). This is done by introducing a mutex to cover firmware configuration changes, which is made to also ensure mutual exclusion between other operations changing the state or configuration of the firmware. With this we can drop the rcu read lock. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-14rt2800: fix TX_PIN_CFG setting for non MT7620 chipsStanislaw Gruszka1-1/+4
commit 83ec489193894e52bd395eec470f4f7c4286d4a5 upstream. Since commit 41977e86c984 ("rt2x00: add support for MT7620") we do not initialize TX_PIN_CFG setting. This cause breakage at least on some RT3573 devices. To fix the problem patch restores previous behaviour for non MT7620 chips. Fixes: 41977e86c984 ("rt2x00: add support for MT7620") Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1480829 Reported-and-tested-by: Jussi Eloranta <jussi.eloranta@csun.edu> Cc: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-14brcmfmac: feature check for multi-scheduled scan fails on bcm4345 devicesIan W MORRISON1-1/+2
commit f957dd3c8db2781c8a334b166800788feb618625 upstream. The firmware feature check introduced for multi-scheduled scan is also failing for bcm4345 devices resulting in a firmware crash. The reason for this crash has not yet been root cause so this patch avoids the feature check for those device as a short-term fix. Fixes: 9fe929aaace6 ("brcmfmac: add firmware feature detection for gscan feature") Signed-off-by: Ian W MORRISON <ianwmorrison@gmail.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-14rtlwifi: btcoexist: Fix antenna selection codeLarry Finger1-7/+16
commit 6d622692836950b3c943776f84c4557ff6c02f3b upstream. In commit 87d8a9f35202 ("rtlwifi: btcoex: call bind to setup btcoex"), the code turns on a call to exhalbtc_bind_bt_coex_withadapter(). This routine contains a bug that causes incorrect antenna selection for those HP laptops with only one antenna and an incorrectly programmed EFUSE. These boxes are the ones that need the ant_sel module parameter. Fixes: 87d8a9f35202 ("rtlwifi: btcoex: call bind to setup btcoex") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-14rtlwifi: btcoexist: Fix breakage of ant_sel for rtl8723beLarry Finger1-1/+4
commit a33fcba6ec01efcca33b1afad91057020f247f15 upstream. In commit bcd37f4a0831 ("rtlwifi: btcoex: 23b 2ant: let bt transmit when hw initialisation done"), there is an additional error when the module parameter ant_sel is used to select the auxilary antenna. The error is that the antenna selection is not checked when writing the antenna selection register. Fixes: bcd37f4a0831 ("rtlwifi: btcoex: 23b 2ant: let bt transmit when hw initialisation done") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-09rtlwifi: Fix fallback firmware loadingSven Joachim2-24/+10
commit 1d9b168d8ea9a0f51947d0e2f84856e77d2fe7ff upstream. Commit f70e4df2b384 ("rtlwifi: Add code to read new versions of firmware") added code to load an old firmware file if the new one is not available. Unfortunately that code is never reached because request_firmware_nowait() does not wait for the firmware to show up and returns 0 even if the file is not there. Use the existing fallback mechanism introduced by commit 62009b7f1279 ("rtlwifi: rtl8192cu: Add new firmware") instead. Fixes: f70e4df2b384 ("rtlwifi: Add code to read new versions of firmware") Signed-off-by: Sven Joachim <svenjoac@gmx.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-09rtlwifi: Fix memory leak when firmware request failsSouptick Joarder9-0/+24
commit f2764f61fa10593204b0c5e4e9a68dba02112e50 upstream. This patch will fix memory leak when firmware request fails Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Cc: Sven Joachim <svenjoac@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-09mwifiex: correct channel stat buffer overflowsBrian Norris2-1/+7
commit 4b5dde2d6234ff5bc68e97e6901d1f2a0a7f3749 upstream. mwifiex records information about various channels as it receives scan information. It does this by appending to a buffer that was sized to the max number of supported channels on any band, but there are numerous problems: (a) scans can return info from more than one band (e.g., both 2.4 and 5 GHz), so the determined "max" is not large enough (b) some firmware appears to return multiple results for a given channel, so the max *really* isn't large enough (c) there is no bounds checking when stashing these stats, so problems (a) and (b) can easily lead to buffer overflows Let's patch this by setting a slightly-more-correct max (that accounts for a combination of both 2.4G and 5G bands) and adding a bounds check when writing to our statistics buffer. Due to problem (b), we still might not properly report all known survey information (e.g., with "iw <dev> survey dump"), since duplicate results (or otherwise "larger than expected" results) will cause some truncation. But that's a problem for a future bugfix. (And because of this known deficiency, only log the excess at the WARN level, since that isn't visible by default in this driver and would otherwise be a bit too noisy.) Fixes: bf35443314ac ("mwifiex: channel statistics support for mwifiex") Cc: Avinash Patil <patila@marvell.com> Cc: Xinming Hu <huxm@marvell.com> Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-09iwlwifi: pci: add new PCI ID for 7265DLuca Coelho1-0/+1
commit 3f7a5e13e85026b6e460bbd6e87f87379421d272 upstream. We have a new PCI subsystem ID for 7265D. Add it to the list. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-09rtlwifi: rtl_pci_probe: Fix fail path of _rtl_pci_find_adapterMalcolm Priestley1-2/+2
commit fc81bab5eeb103711925d7510157cf5cd2b153f4 upstream. _rtl_pci_find_adapter fail path will jump to label fail3 for unsupported adapter types. However, on course for fail3 there will be call rtl_deinit_core before rtl_init_core. For the inclusion of checking pci_iounmap this fail can be moved to fail2. Fixes [ 4.492963] BUG: unable to handle kernel NULL pointer dereference at (null) [ 4.493067] IP: rtl_deinit_core+0x31/0x90 [rtlwifi] Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-09ath10k: fix memory leak in rx ring buffer allocationRakesh Pillai1-6/+6
commit f35a7f91f66af528b3ee1921de16bea31d347ab0 upstream. The rx ring buffers are added to a hash table if firmware support full rx reorder. If the full rx reorder support flag is not set before allocating the rx ring buffers, none of the buffers are added to the hash table. There is a race condition between rx ring refill and rx buffer replenish from napi poll. The interrupts are enabled in hif start, before the rx ring is refilled during init. We replenish buffers from napi poll due to the interrupts which get enabled after hif start. Hence before the entire rx ring is refilled during the init, the napi poll replenishes a few buffers in steps of 100 buffers per attempt. During this rx ring replenish from napi poll, the rx reorder flag has not been set due to which the replenished buffers are not added to the hash table Set the rx full reorder support flag before we allocate the rx ring buffer to avoid the memory leak. Signed-off-by: Rakesh Pillai <pillair@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-31wl1251: add a missing spin_lock_init()Cong Wang1-0/+1
wl1251: add a missing spin_lock_init() This fixes the following kernel warning: [ 5668.771453] BUG: spinlock bad magic on CPU#0, kworker/u2:3/9745 [ 5668.771850] lock: 0xce63ef20, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 [ 5668.772277] CPU: 0 PID: 9745 Comm: kworker/u2:3 Tainted: G W 4.12.0-03002-gec979a4-dirty #40 [ 5668.772796] Hardware name: Nokia RX-51 board [ 5668.773071] Workqueue: phy1 wl1251_irq_work [ 5668.773345] [<c010c9e4>] (unwind_backtrace) from [<c010a274>] (show_stack+0x10/0x14) [ 5668.773803] [<c010a274>] (show_stack) from [<c01545a4>] (do_raw_spin_lock+0x6c/0xa0) [ 5668.774230] [<c01545a4>] (do_raw_spin_lock) from [<c06ca578>] (_raw_spin_lock_irqsave+0x10/0x18) [ 5668.774658] [<c06ca578>] (_raw_spin_lock_irqsave) from [<c048c010>] (wl1251_op_tx+0x38/0x5c) [ 5668.775115] [<c048c010>] (wl1251_op_tx) from [<c06a12e8>] (ieee80211_tx_frags+0x188/0x1c0) [ 5668.775543] [<c06a12e8>] (ieee80211_tx_frags) from [<c06a138c>] (__ieee80211_tx+0x6c/0x130) [ 5668.775970] [<c06a138c>] (__ieee80211_tx) from [<c06a3dbc>] (ieee80211_tx+0xdc/0x104) [ 5668.776367] [<c06a3dbc>] (ieee80211_tx) from [<c06a4af0>] (__ieee80211_subif_start_xmit+0x454/0x8c8) [ 5668.776824] [<c06a4af0>] (__ieee80211_subif_start_xmit) from [<c06a4f94>] (ieee80211_subif_start_xmit+0x30/0x2fc) [ 5668.777343] [<c06a4f94>] (ieee80211_subif_start_xmit) from [<c0578848>] (dev_hard_start_xmit+0x80/0x118) ... by adding the missing spin_lock_init(). Reported-by: Pavel Machek <pavel@ucw.cz> Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Pavel Machek <pavel@ucw.cz> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24iwlwifi: pcie: move rx workqueue initialization to iwl_trans_pcie_alloc()Luca Coelho3-9/+12
Work queues cannot be allocated when a mutex is held because the mutex may be in use and that would make it sleep. Doing so generates the following splat with 4.13+: [ 19.513298] ====================================================== [ 19.513429] WARNING: possible circular locking dependency detected [ 19.513557] 4.13.0-rc5+ #6 Not tainted [ 19.513638] ------------------------------------------------------ [ 19.513767] cpuhp/0/12 is trying to acquire lock: [ 19.513867] (&tz->lock){+.+.+.}, at: [<ffffffff924afebb>] thermal_zone_get_temp+0x5b/0xb0 [ 19.514047] [ 19.514047] but task is already holding lock: [ 19.514166] (cpuhp_state){+.+.+.}, at: [<ffffffff91cc4baa>] cpuhp_thread_fun+0x3a/0x210 [ 19.514338] [ 19.514338] which lock already depends on the new lock. This lock dependency already existed with previous kernel versions, but it was not detected until commit 49dfe2a67797 ("cpuhotplug: Link lock stacks for hotplug callbacks") was introduced. Reported-by: David Weinehall <david.weinehall@intel.com> Reported-by: Jiri Kosina <jikos@kernel.org> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-14brcmfmac: feature check for multi-scheduled scan fails on bcm4343x devicesArend Van Spriel1-2/+4
The firmware feature check introduced for multi-scheduled scan turned out to be failing for bcm4343{0,1,8} devices resulting in a firmware crash. The reason for this crash has not yet been root cause so this patch avoids the feature check for those device as a short-term fix. Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Reported-by: Ian Molton <ian@mnementh.co.uk> Fixes: 9fe929aaace6 ("brcmfmac: add firmware feature detection for gscan feature") Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-09iwlwifi: mvm: send delba upon rx ba session timeoutNaftali Goldstein1-2/+2
When an RX block-ack session times out, the firmware, which offloads RX reordering but not the BA session negotiation, stops the session but doesn't send a DELBA. This causes the the session to remain active in the remote device, so no more BA sessions will be established, causing a severe throughput degradation due to the lack of aggregation. Use the new ieee80211_rx_ba_timer_expired API when the ba session timer expires, since this will tear down the ba session and also send a delba. The previous API used is intended for drivers that offload the addba/delba negotiation, but not the rx reordering, while our driver does the opposite. This patch depends on "mac80211: add api to start ba session timer expired flow". Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-09iwlwifi: mvm: don't WARN when a legit race happens in A-MPDUEmmanuel Grumbach1-4/+6
When we start an Rx A-MPDU session, we first get the AddBA request, then we send an ADD_STA command to the firmware that will reply with a BAID which is a hardware resource that tracks the BA session. This BAID will appear on each and every frame that we get from the firwmare until the A-MPDU session is torn down. In the Rx path, we look at this BAID to manage the reordering buffer. This flow is inherently racy since the hardware will start to put the BAID in the frames it receives even if the firmware hasn't sent the response to the ADD_STA command. This basically means that the driver can get frames with a valid BAID that it doesn't know yet. When that happens, the driver used to WARN. Fix this by simply not WARN in this case. When the driver will know abou the BAID, it will initialise the relevant states and the next frame with a valid BAID will refresh them. Fixes: b915c10174fb ("iwlwifi: mvm: add reorder buffer per queue") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-09iwlwifi: mvm: start mac queues when deferred tx frames are purgedAvraham Stern1-1/+11
In AP mode, if a station is removed just as it is adding a new stream, the queue in question will remain stopped and no more TX will happen in this queue, leading to connection failures and other problems. This is because under DQA, when tx is deferred because a queue needs to be allocated, the mac queue for that TID is stopped until the new stream is added. If at this point the station that this stream belongs to is removed, all the deferred tx frames are purged, but the mac queue is not restarted. As a result, all following tx on this queue will not be transmitted. Fix this by starting the relevant mac queues when the deferred tx frames are purged. Fixes: 24afba7690e4 ("iwlwifi: mvm: support bss dynamic alloc/dealloc of queues") Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-05iwlwifi: mvm: Fix a memory leak in an error handling path in ↵Christophe Jaillet1-2/+4
'iwl_mvm_sar_get_wgds_table()' We should free 'wgds.pointer' here as done a few lines above in another error handling path. It was allocated within 'acpi_evaluate_object()'. Fixes: c52030a01ccc ("iwlwifi: mvm: add GEO_TX_POWER_LIMIT cmd for geographic tx power table") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-01iwlwifi: add the new 9000 series PCI IDsTzipi Peres1-0/+20
Add two PCI IDs for the 9160 series. Add five PCI IDs for the 9260 series. Add one PCI IDs for the 9270 series. Add seven PCI IDs for the 9460 series. Add five PCI IDs for the 9560 series. Signed-off-by: Tzipi Peres <tzipi.peres@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-01iwlwifi: mvm: set the RTS_MIMO_PROT bit in flag mask when sending sta to fwNaftali Goldstein1-1/+2
Set the STA_FLG_RTS_MIMO_PROT bit in station_flags_msk of the add sta command, so that when smps mode changes, the FW will know about it. In particular, in AP mode, clients are added upon receival of an auth request, at which point there's no knowledge of the client's smps mode. When the assoc request arrives, the add_sta command is resent to modify the station parameters. At this point the driver knows the smps mode, but since the corresponding bit in the mask is not set, the fw doesn't update this field so there's no rts protection for mimo. Fixes: 5bc5aaad407c ("iwlwifi: mvm: set up initial SMPS/NSS station info") Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-01iwlwifi: fix fw_pre_next_step to apply also for C stepHaim Dreyfuss3-13/+14
C step NICs should use the latest FW (currently B step). Correct the condition to make C step NICs advanced its default FW name to the latest one. Also rename _next_ to b_or_c to avoid confusion. Fixes: 5da083d1922c ("iwlwifi: add support for 9000 HW B-step NICs") Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-01iwlwifi: mvm: rs: fix TLC statistics collectionGregory Greenman1-4/+4
Statistics should be collected according to the actual rate a frame/aggregation was transmitted and not according to the initial rate from the last LQ command (these rates are different if the frames were retransmitted at a lower rate from the rate scale table). This is needed to remove throughput degradation. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-01iwlwifi: mvm: set A-MPDU bit upon empty BA notification from FWGregory Greenman1-0/+2
The bit was set only if there was at least one reclaimed frame in an aggregation. It's important to set it also in the case that the whole A-MPDU was lost, otherwise rate scaling statistics will not be updated correctly. Thus, set it always in ba notification handler. This fixes a throughput degradation of about 20% in certain scenarios with multiple streams on 11ac. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-01iwlwifi: split the regulatory rules when the bandwidth flags require itEmmanuel Grumbach1-8/+11
When we create a regulatory domain out of an MCC notification, we need to make sure that all the channels in the rule have the exact same properties. The current code mixes channel 36 and 40 although 36 can be a control channel with HT40+ (36, 40) whereas 40 can't be a control channel with HT40+ since (40, 44) is invalid. Because of that, cfg80211 would allow to connect in 40MHz to APs that are configured to channel 40 HT40+ and that made our firmware assert. Fix this by checking the bandwidth flags before taking the decision if the rule should be split. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=195299 partly. Fixes: af45a9003f1f ("iwlwifi: create regdomain from mcc_update_cmd response") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-01iwlwifi: add TLV for MLME offload firmware capabilityEmmanuel Grumbach1-0/+2
The firmware now adds a new DWORD for the MLME offload's capability even on firmware versions that don't support it. Add the TLV bit to avoid getting the print: capa flags index 3 larger than supported by driver. This fixes the bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196195 Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-01iwlwifi: mvm: fix TCP CSUM offload with WEP and A000 seriesEmmanuel Grumbach1-2/+8
When we enabled TCP checksum offload, we need to tell the firmware where the IP header starts. If we have an IV, then we need to adapt that value since the IV is placed before the SNAP header. This is true only for cases where the driver adds the IV, not the WEP case in which the IV is added by the firmware itself. On A000 devices series, the IV is always added by the device. Fix this. Fixes: 5e6a98dc4863 ("iwlwifi: mvm: enable TCP/UDP checksum support for 9000 family") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-07-27brcmfmac: fix memleak due to calling brcmf_sdiod_sgtable_alloc() twiceArend Van Spriel1-5/+0
Due to a bugfix in wireless tree and the commit mentioned below a merge was needed which went haywire. So the submitted change resulted in the function brcmf_sdiod_sgtable_alloc() being called twice during the probe thus leaking the memory of the first call. Cc: stable@vger.kernel.org # 4.6.x Fixes: 4d7928959832 ("brcmfmac: switch to new platform data") Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-27brcmfmac: Don't grow SKB by negative sizeDaniel Stone1-1/+1
The commit to rework the headroom check in start_xmit() now calls pxskb_expand_head() unconditionally if the header is CoW. Unfortunately, it does so with the delta between the extant headroom and the header length, which may be negative if there is already sufficient headroom. pskb_expand_head() does allow for size being 0, in which case it just copies, so clamp the header delta to zero. Opening Chrome (and all my tabs) on a PCIE device was enough to reliably hit this. Fixes: 270a6c1f65fe ("brcmfmac: rework headroom check in .start_xmit()") Signed-off-by: Daniel Stone <daniels@collabora.com> Cc: Arend Van Spriel <arend.vanspriel@broadcom.com> Cc: James Hughes <james.hughes@raspberrypi.org> Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Cc: Franky Lin <franky.lin@broadcom.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-21iwlwifi: mvm: defer setting IWL_MVM_STATUS_IN_HW_RESTARTJohannes Berg3-4/+12
A hardware/firmware error may happen at any point in time. In particular, it might happen while mac80211 is in the middle of a flow. We observed the following situation: * mac80211 is in authentication flow, in ieee80211_prep_connection() * iwlwifi firmware crashes, but no error can be reported at this precise point (mostly because the driver method is void, but even if it wasn't we'd just shift to a race condition) * mac80211 continues the flow, trying to add the AP station * iwlwifi has already set its internal restart flag, and so thinks that adding the station is part of the restart and already set up, so it uses the information that's supposed to already be in the struct This can happen with any flow in mac80211 and with any information we try to preserve across hardware restarts. To fix this, only set a new HW_RESTART_REQUESTED flag and translate that to IN_HW_RESTART once mac80211 actually starts the restart by calling our start() method. As a consequence, any mac80211 flow in progress at the time of the restart will properly finish (certainly with errors), before the restart is attempted. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=195299. Reported-by: djagoo <dev@djagoo.io> Reported-by: Łukasz Siudut <lsiudut@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-07-21iwlwifi: mvm: handle IBSS probe_queue in a few missing placesLuca Coelho1-1/+2
When IBSS was implemented for DQA, we missid a few places where it should be handled in the same way as AP. Fixes: ee48b72211f8 ("iwlwifi: mvm: support ibss in dqa mode") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-07-21iwlwifi: fix tracing when tx only is enabledEmmanuel Grumbach1-2/+2
iwl_trace_data is somewhat confusing. It returns a bool that tells if the payload of the skb should be added to the tx_data event. If it returns false, then the payload of the skb is added to the tx event. The purpose is to be able to start tracing with -e iwlwifi and record non-data packets only which saves bandwidth. Since EAPOLs are important, seldom and not real data packet (despite being WiFi data packets), they are included in tx event and thus iwl_trace_data returns false on those. This last part was buggy, and because of that, all the data packets were included in the tx event. Fix that. Fixes: 0c4cb7314d15 ("iwlwifi: tracing: decouple from mac80211") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-07-21iwlwifi: missing error code in iwl_trans_pcie_alloc()Dan Carpenter1-1/+2
We don't set the error code here so we end up returning ERR_PTR(0) which is NULL. The caller doesn't expect that so it results in a NULL dereference. Fixes: 2e5d4a8f61dc ("iwlwifi: pcie: Add new configuration to enable MSIX") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-07-21iwlwifi: mvm: fix a NULL pointer dereference of error in recoveryEmmanuel Grumbach1-0/+12
Sometimes, we can have an firmware crash while trying to recover from a previous firmware problem. When that happens, lots of things can go wrong. For example the stations don't get added properly to mvm->fw_id_to_mac_id. Mac80211 tries to stop A-MPDU upon reconfig but in case of a firmware crash we will bail out fairly early and in the end, we won't delete the A-MPDU Rx timeout. When that timer expired after a double firmware crash, we end up dereferencing mvm->fw_id_to_mac_id[sta_id] which is NULL. Fixes: 10b2b2019d81 ("iwlwifi: mvm: add infrastructure for tracking BA session in driver") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-07-21iwlwifi: pcie: fix unused txq NULL pointer dereferenceMordechai Goodstein1-0/+3
Before TVQM, all TX queues were allocated straight at init. With TVQM, queues are allocated on demand and hence we need to check if a queue exists before dereferencing it. Fixes: 66128fa08806 ("iwlwifi: move to TVQM mode") Signed-off-by: Mordechai Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-07-21iwlwifi: dvm: prevent an out of bounds accessEmmanuel Grumbach1-1/+1
iwlagn_check_ratid_empty takes the tid as a parameter, but it doesn't check that it is not IWL_TID_NON_QOS. Since IWL_TID_NON_QOS = 8 and iwl_priv::tid_data is an array with 8 entries, accessing iwl_priv::tid_data[IWL_TID_NON_QOS] is a bad idea. This happened in iwlagn_rx_reply_tx. Since iwlagn_check_ratid_empty is relevant only to check whether we can open A-MPDU, this flow is irrelevant if tid is IWL_TID_NON_QOS. Call iwlagn_check_ratid_empty only inside the if (tid != IWL_TID_NON_QOS) a few lines earlier in the function. Cc: <stable@vger.kernel.org> Reported-by: Seraphime Kirkovski <kirkseraph@gmail.com> Tested-by: Seraphime Kirkovski <kirkseraph@gmail.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-07-21Revert "rtlwifi: btcoex: rtl8723be: fix ant_sel not work"Larry Finger2-4/+0
This reverts commit f95d95a7cd5514549dcf6ba754f0ee834cce3e1f. With commit f95d95a7cd55 ("rtlwifi: btcoex: rtl8723be: fix ant_sel not work"), the kernel has a NULL pointer dereference oops. This content and the proper fix will be included in a later patch. Fixes: f95d95a7cd55 ("rtlwifi: btcoex: rtl8723be: fix ant_sel not work") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-21brcmfmac: fix regression in brcmf_sdio_txpkt_hdalign()Arend Van Spriel1-1/+2
Recent change in brcmf_sdio_txpkt_hdalign() changed the behavior and now always returns 0. This resulted in a regression which basically renders the device useless. Fixes: 270a6c1f65fe ("brcmfmac: rework headroom check in .start_xmit()") Reported-by: S. Gilles <sgilles@math.umd.edu> Tested-by: S. Gilles <sgilles@math.umd.edu> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-13rt2x00: make const array glrt_table staticColin Ian King1-1/+1
Don't populate array glrt_table on the stack but make it static. Makes the object code a smaller by over 670 bytes: Before: text data bss dec hex filename 131772 4733 0 136505 21539 rt2800lib.o After: text data bss dec hex filename 131043 4789 0 135832 21298 rt2800lib.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-12brcmfmac: fix possible buffer overflow in brcmf_cfg80211_mgmt_tx()Arend van Spriel1-0/+5
The lower level nl80211 code in cfg80211 ensures that "len" is between 25 and NL80211_ATTR_FRAME (2304). We subtract DOT11_MGMT_HDR_LEN (24) from "len" so thats's max of 2280. However, the action_frame->data[] buffer is only BRCMF_FIL_ACTION_FRAME_SIZE (1800) bytes long so this memcpy() can overflow. memcpy(action_frame->data, &buf[DOT11_MGMT_HDR_LEN], le16_to_cpu(action_frame->len)); Cc: stable@vger.kernel.org # 3.9.x Fixes: 18e2f61db3b70 ("brcmfmac: P2P action frame tx.") Reported-by: "freenerguo(郭大兴)" <freenerguo@tencent.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-09Merge tag 'pci-v4.13-changes' of ↵Linus Torvalds1-29/+42
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - add sysfs max_link_speed/width, current_link_speed/width (Wong Vee Khee) - make host bridge IRQ mapping much more generic (Matthew Minter, Lorenzo Pieralisi) - convert most drivers to pci_scan_root_bus_bridge() (Lorenzo Pieralisi) - mutex sriov_configure() (Jakub Kicinski) - mutex pci_error_handlers callbacks (Christoph Hellwig) - split ->reset_notify() into ->reset_prepare()/reset_done() (Christoph Hellwig) - support multiple PCIe portdrv interrupts for MSI as well as MSI-X (Gabriele Paoloni) - allocate MSI/MSI-X vector for Downstream Port Containment (Gabriele Paoloni) - fix MSI IRQ affinity pre/post/min_vecs issue (Michael Hernandez) - test INTx masking during enumeration, not at run-time (Piotr Gregor) - avoid using device_may_wakeup() for runtime PM (Rafael J. Wysocki) - restore the status of PCI devices across hibernation (Chen Yu) - keep parent resources that start at 0x0 (Ard Biesheuvel) - enable ECRC only if device supports it (Bjorn Helgaas) - restore PRI and PASID state after Function-Level Reset (CQ Tang) - skip DPC event if device is not present (Keith Busch) - check domain when matching SMBIOS info (Sujith Pandel) - mark Intel XXV710 NIC INTx masking as broken (Alex Williamson) - avoid AMD SB7xx EHCI USB wakeup defect (Kai-Heng Feng) - work around long-standing Macbook Pro poweroff issue (Bjorn Helgaas) - add Switchtec "running" status flag (Logan Gunthorpe) - fix dra7xx incorrect RW1C IRQ register usage (Arvind Yadav) - modify xilinx-nwl IRQ chip for legacy interrupts (Bharat Kumar Gogada) - move VMD SRCU cleanup after bus, child device removal (Jon Derrick) - add Faraday clock handling (Linus Walleij) - configure Rockchip MPS and reorganize (Shawn Lin) - limit Qualcomm TLP size to 2K (hardware issue) (Srinivas Kandagatla) - support Tegra MSI 64-bit addressing (Thierry Reding) - use Rockchip normal (not privileged) register bank (Shawn Lin) - add HiSilicon Kirin SoC PCIe controller driver (Xiaowei Song) - add Sigma Designs Tango SMP8759 PCIe controller driver (Marc Gonzalez) - add MediaTek PCIe host controller support (Ryder Lee) - add Qualcomm IPQ4019 support (John Crispin) - add HyperV vPCI protocol v1.2 support (Jork Loeser) - add i.MX6 regulator support (Quentin Schulz) * tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits) PCI: tango: Add Sigma Designs Tango SMP8759 PCIe host bridge support PCI: Add DT binding for Sigma Designs Tango PCIe controller PCI: rockchip: Use normal register bank for config accessors dt-bindings: PCI: Add documentation for MediaTek PCIe PCI: Remove __pci_dev_reset() and pci_dev_reset() PCI: Split ->reset_notify() method into ->reset_prepare() and ->reset_done() PCI: xilinx: Make of_device_ids const PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts PCI: vmd: Move SRCU cleanup after bus, child device removal PCI: vmd: Correct comment: VMD domains start at 0x10000, not 0x1000 PCI: versatile: Add local struct device pointers PCI: tegra: Do not allocate MSI target memory PCI: tegra: Support MSI 64-bit addressing PCI: rockchip: Use local struct device pointer consistently PCI: rockchip: Check for clk_prepare_enable() errors during resume MAINTAINERS: Remove Wenrui Li as Rockchip PCIe driver maintainer PCI: rockchip: Configure RC's MPS setting PCI: rockchip: Reconfigure configuration space header type PCI: rockchip: Split out rockchip_pcie_cfg_configuration_accesses() PCI: rockchip: Move configuration accesses into rockchip_pcie_cfg_atu() ...
2017-07-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds370-6553/+24987
Pull networking updates from David Miller: "Reasonably busy this cycle, but perhaps not as busy as in the 4.12 merge window: 1) Several optimizations for UDP processing under high load from Paolo Abeni. 2) Support pacing internally in TCP when using the sch_fq packet scheduler for this is not practical. From Eric Dumazet. 3) Support mutliple filter chains per qdisc, from Jiri Pirko. 4) Move to 1ms TCP timestamp clock, from Eric Dumazet. 5) Add batch dequeueing to vhost_net, from Jason Wang. 6) Flesh out more completely SCTP checksum offload support, from Davide Caratti. 7) More plumbing of extended netlink ACKs, from David Ahern, Pablo Neira Ayuso, and Matthias Schiffer. 8) Add devlink support to nfp driver, from Simon Horman. 9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa Prabhu. 10) Add stack depth tracking to BPF verifier and use this information in the various eBPF JITs. From Alexei Starovoitov. 11) Support XDP on qed device VFs, from Yuval Mintz. 12) Introduce BPF PROG ID for better introspection of installed BPF programs. From Martin KaFai Lau. 13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann. 14) For loads, allow narrower accesses in bpf verifier checking, from Yonghong Song. 15) Support MIPS in the BPF selftests and samples infrastructure, the MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David Daney. 16) Support kernel based TLS, from Dave Watson and others. 17) Remove completely DST garbage collection, from Wei Wang. 18) Allow installing TCP MD5 rules using prefixes, from Ivan Delalande. 19) Add XDP support to Intel i40e driver, from Björn Töpel 20) Add support for TC flower offload in nfp driver, from Simon Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub Kicinski, and Bert van Leeuwen. 21) IPSEC offloading support in mlx5, from Ilan Tayari. 22) Add HW PTP support to macb driver, from Rafal Ozieblo. 23) Networking refcount_t conversions, From Elena Reshetova. 24) Add sock_ops support to BPF, from Lawrence Brako. This is useful for tuning the TCP sockopt settings of a group of applications, currently via CGROUPs" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits) net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap cxgb4: Support for get_ts_info ethtool method cxgb4: Add PTP Hardware Clock (PHC) support cxgb4: time stamping interface for PTP nfp: default to chained metadata prepend format nfp: remove legacy MAC address lookup nfp: improve order of interfaces in breakout mode net: macb: remove extraneous return when MACB_EXT_DESC is defined bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case bpf: fix return in load_bpf_file mpls: fix rtm policy in mpls_getroute net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t net, ax25: convert ax25_route.refcount from atomic_t to refcount_t net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t ...
2017-07-04Merge tag 'driver-core-4.13-rc1' of ↵Linus Torvalds2-10/+6
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big driver core update for 4.13-rc1. The large majority of this is a lot of cleanup of old fields in the driver core structures and their remaining usages in random drivers. All of those fixes have been reviewed by the various subsystem maintainers. There's also some small firmware updates in here, a new kobject uevent api interface that makes userspace interaction easier, and a few other minor things. All of these have been in linux-next for a long while with no reported issues" * tag 'driver-core-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (56 commits) arm: mach-rpc: ecard: fix build error zram: convert remaining CLASS_ATTR() to CLASS_ATTR_RO() driver-core: remove struct bus_type.dev_attrs powerpc: vio_cmo: use dev_groups and not dev_attrs for bus_type powerpc: vio: use dev_groups and not dev_attrs for bus_type USB: usbip: convert to use DRIVER_ATTR_RW s390: drivers: convert to use DRIVER_ATTR_RO/WO platform: thinkpad_acpi: convert to use DRIVER_ATTR_RO/RW pcmcia: ds: convert to use DRIVER_ATTR_RO wireless: ipw2x00: convert to use DRIVER_ATTR_RW net: ehea: convert to use DRIVER_ATTR_RO net: caif: convert to use DRIVER_ATTR_RO TTY: hvc: convert to use DRIVER_ATTR_RW PCI: pci-driver: convert to use DRIVER_ATTR_WO IB: nes: convert to use DRIVER_ATTR_RW HID: hid-core: convert to use DRIVER_ATTR_RO and drv_groups arm: ecard: fix dev_groups patch typo tty: serdev: use dev_groups and not dev_attrs for bus_type sparc: vio: use dev_groups and not dev_attrs for bus_type hid: intel-ish-hid: use dev_groups and not dev_attrs for bus_type ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-24 10:29:52 +0300