summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2014-08-08ath9k: fix aggregation session lockupFelix Fietkau1-0/+9
commit c01fac1c77a00227f706a1654317023e3f4ac7f0 upstream. If an aggregation session fails, frames still end up in the driver queue with IEEE80211_TX_CTL_AMPDU set. This causes tx for the affected station/tid to stall, since ath_tx_get_tid_subframe returning packets to send. Fix this by clearing IEEE80211_TX_CTL_AMPDU as long as no aggregation session is running. Reported-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-28iwlwifi: mvm: disable CTS to SelfEmmanuel Grumbach1-6/+2
commit dc271ee0d04d12d6bfabacbec803289a7072fbd9 upstream. Firmware folks seem say that this flag can make trouble. Drop it. The advantage of CTS to self is that it slightly reduces the cost of the protection, but make the protection less reliable. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-28mwifiex: fix Tx timeout issueAmitkumar Karwar1-0/+1
commit d76744a93246eccdca1106037e8ee29debf48277 upstream. https://bugzilla.kernel.org/show_bug.cgi?id=70191 https://bugzilla.kernel.org/show_bug.cgi?id=77581 It is observed that sometimes Tx packet is downloaded without adding driver's txpd header. This results in firmware parsing garbage data as packet length. Sometimes firmware is unable to read the packet if length comes out as invalid. This stops further traffic and timeout occurs. The root cause is uninitialized fields in tx_info(skb->cb) of packet used to get garbage values. In this case if MWIFIEX_BUF_FLAG_REQUEUED_PKT flag is mistakenly set, txpd header was skipped. This patch makes sure that tx_info is correctly initialized to fix the problem. Reported-by: Andrew Wiley <wiley.andrew.j@gmail.com> Reported-by: Linus Gasser <list@markas-al-nour.org> Reported-by: Michael Hirsch <hirsch@teufel.de> Tested-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Maithili Hinge <maithili@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-28iwlwifi: dvm: don't enable CTS to selfEmmanuel Grumbach1-12/+0
commit 43d826ca5979927131685cc2092c7ce862cb91cd upstream. We should always prefer to use full RTS protection. Using CTS to self gives a meaningless improvement, but this flow is much harder for the firmware which is likely to have issues with it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-28iwlwifi: update the 7265 series HW IDsOren Givon1-1/+2
commit b3c063ae7279981f7161e63b44f214c62f122b32 upstream. Add one more 7265 series HW ID. Edit one existing 7265 series HW ID. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09b43: fix frequency reported on G-PHY with /new/ firmwareRafał Miłecki1-3/+7
commit 2fc68eb122c7ea6cd5be1fe7d6650c0beb2f4f40 upstream. Support for firmware rev 508+ was added years ago, but we never noticed it reports channel in a different way for G-PHY devices. Instead of offset from 2400 MHz it simply passes channel id (AKA hw_value). So far it was (most probably) affecting monitor mode users only, but the following recent commit made it noticeable for quite everybody: commit 3afc2167f60a327a2c1e1e2600ef209a3c2b75b7 Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Date: Tue Mar 4 16:50:13 2014 +0200 cfg80211/mac80211: ignore signal if the frame was heard on wrong channel Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09iwlwifi: pcie: try to get ownership several timesEmmanuel Grumbach1-10/+16
commit 501fd9895c1d7d8161ed56698ae2fccb10ef14f5 upstream. Some races with the hardware can happen when we take ownership of the device. Don't give up after the first try. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09rt2x00: fix rfkill regression on rt2500pciStanislaw Gruszka3-4/+28
commit 616a8394b5df8c88f4dd416f4527439a4e365034 upstream. As reported by Niels, starting rfkill polling during device probe (commit e2bc7c5, generally sane change) broke rfkill on rt2500pci device. I considered that bug as some initalization issue, which should be fixed on rt2500pci specific code. But after several attempts (see bug report for details) we fail to find working solution. Hence I decided to revert to old behaviour on rt2500pci to fix regression. Additionally patch also unregister rfkill on device remove instead of ifconfig down, what was another issue introduced by bad commit. Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=73821 Fixes: e2bc7c5f3cb8 ("rt2x00: Fix rfkill_polling register function.") Bisected-by: Niels <nille0386@googlemail.com> Reported-and-tested-by: Niels <nille0386@googlemail.com> Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09rt2x00: disable TKIP on USBStanislaw Gruszka1-0/+2
commit 8edcb0ba0d56f5914eef11eda6db8bfe74eb9ca8 upstream. On USB we can not get atomically TKIP key. We have to disable support for TKIP acceleration on USB hardware to avoid bug as showed bellow. [ 860.827243] BUG: scheduling while atomic: hostapd/3397/0x00000002 <snip> [ 860.827280] Call Trace: [ 860.827282] [<ffffffff81682ea6>] dump_stack+0x4d/0x66 [ 860.827284] [<ffffffff8167eb9b>] __schedule_bug+0x47/0x55 [ 860.827285] [<ffffffff81685bb3>] __schedule+0x733/0x7b0 [ 860.827287] [<ffffffff81685c59>] schedule+0x29/0x70 [ 860.827289] [<ffffffff81684f8a>] schedule_timeout+0x15a/0x2b0 [ 860.827291] [<ffffffff8105ac50>] ? ftrace_raw_event_tick_stop+0xc0/0xc0 [ 860.827294] [<ffffffff810c13c2>] ? __module_text_address+0x12/0x70 [ 860.827296] [<ffffffff81686823>] wait_for_completion_timeout+0xb3/0x140 [ 860.827298] [<ffffffff81080fc0>] ? wake_up_state+0x20/0x20 [ 860.827301] [<ffffffff814d5b3d>] usb_start_wait_urb+0x7d/0x150 [ 860.827303] [<ffffffff814d5cd5>] usb_control_msg+0xc5/0x110 [ 860.827305] [<ffffffffa02fb0c6>] rt2x00usb_vendor_request+0xc6/0x160 [rt2x00usb] [ 860.827307] [<ffffffffa02fb215>] rt2x00usb_vendor_req_buff_lock+0x75/0x150 [rt2x00usb] [ 860.827309] [<ffffffffa02fb393>] rt2x00usb_vendor_request_buff+0xa3/0xe0 [rt2x00usb] [ 860.827311] [<ffffffffa023d1a3>] rt2x00usb_register_multiread+0x33/0x40 [rt2800usb] [ 860.827314] [<ffffffffa05805f9>] rt2800_get_tkip_seq+0x39/0x50 [rt2800lib] [ 860.827321] [<ffffffffa0480f88>] ieee80211_get_key+0x218/0x2a0 [mac80211] [ 860.827322] [<ffffffff815cc68c>] ? __nlmsg_put+0x6c/0x80 [ 860.827329] [<ffffffffa051b02e>] nl80211_get_key+0x22e/0x360 [cfg80211] Reported-and-tested-by: Peter Wu <lekensteyn@gmail.com> Reported-and-tested-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-22Merge branch 'for-john' of ↵John W. Linville1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2014-05-21iwlwifi: mvm: disable beacon filteringEmmanuel Grumbach1-1/+1
This feature has been causing trouble - disable it for now. Cc: <stable@vger.kernel.org> [3.13+] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-14ath9k_htc: Stop ANI before doing hw_resetRajkumar Manoharan1-1/+4
During remain on channel request, ANI worker thread is not stopped before doing hw reset. This is causing kernel crash in hw_per_calibration. This change ensures that ANI is stopped before doing chip reset and it will be rescheduled later when the chip is configured back to home channel and having valid bss. Reported-by: David Herrmann <dh.herrmann@gmail.com> Tested-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13Merge branch 'for-john' of ↵John W. Linville4-13/+13
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2014-05-13iwlwifi: mvm: prevent sched scan while not idleDavid Spinadel3-10/+10
Prevent sched scan while not idle (including during association or in AP mode) instead of while associated only. This fixes my previous commit which was incomplete: commit bd5e4744a6ca64299b57a2682c720d00a475a734 Author: David Spinadel <david.spinadel@intel.com> Date: Thu Apr 24 13:15:29 2014 +0300 iwlwifi: mvm: do no sched scan while associated Currently the FW doesn't support sched scan while associated, Prevent it. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-13iwlwifi: mvm: fix off-by-one in scan channels configurationEliad Peller1-1/+1
tail should be equal to the last valid index, so decrease it by one. This error causes in "a gap" in some cases (as well as some possible out-of-bound write), finally resulting in ucode assertion. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-12brcmfmac: Fix iovar 'bw_cap' set command failureDaniel Kim1-1/+1
Fix iovar 'bw_cap' set command failure introduced by commit ff3b0fba6f25555ef59c55d138a467d0f81d82d7 Author: Arend van Spriel <arend@broadcom.com> Date: Sat Mar 15 12:00:57 2014 +0100 brcmfmac: fallback to mimo_bw_cap for older firmwares This resulted in disabling 20MHz operation in the firmware. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Daniel Kim <dekim@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-11iwlwifi: mvm: fix setting channel in monitor modeEmmanuel Grumbach1-2/+2
There was a deadlock in monitor mode when we were setting the channel if the channel was not 1. ====================================================== [ INFO: possible circular locking dependency detected ] 3.14.3 #4 Not tainted ------------------------------------------------------- iw/3323 is trying to acquire lock: (&local->chanctx_mtx){+.+.+.}, at: [<ffffffffa062e2f2>] ieee80211_vif_release_channel+0x42/0xb0 [mac80211] but task is already holding lock: (&local->iflist_mtx){+.+...}, at: [<ffffffffa0609e0a>] ieee80211_set_monitor_channel+0x5a/0x1b0 [mac80211] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&local->iflist_mtx){+.+...}: [<ffffffff810d95bb>] __lock_acquire+0xb3b/0x13b0 [<ffffffff810d9ee0>] lock_acquire+0xb0/0x1f0 [<ffffffff817eb9c8>] mutex_lock_nested+0x78/0x4f0 [<ffffffffa06225cf>] ieee80211_iterate_active_interfaces+0x2f/0x60 [mac80211] [<ffffffffa0518189>] iwl_mvm_recalc_multicast+0x49/0xa0 [iwlmvm] [<ffffffffa051822e>] iwl_mvm_configure_filter+0x4e/0x70 [iwlmvm] [<ffffffffa05e6d43>] ieee80211_configure_filter+0x153/0x5f0 [mac80211] [<ffffffffa05e71f5>] ieee80211_reconfig_filter+0x15/0x20 [mac80211] [snip] -> #1 (&mvm->mutex){+.+.+.}: [<ffffffff810d95bb>] __lock_acquire+0xb3b/0x13b0 [<ffffffff810d9ee0>] lock_acquire+0xb0/0x1f0 [<ffffffff817eb9c8>] mutex_lock_nested+0x78/0x4f0 [<ffffffffa0517246>] iwl_mvm_add_chanctx+0x56/0xe0 [iwlmvm] [<ffffffffa062ca1e>] ieee80211_new_chanctx+0x13e/0x410 [mac80211] [<ffffffffa062d953>] ieee80211_vif_use_channel+0x1c3/0x5a0 [mac80211] [<ffffffffa06035ab>] ieee80211_add_virtual_monitor+0x1ab/0x6b0 [mac80211] [<ffffffffa06052ea>] ieee80211_do_open+0xe6a/0x15a0 [mac80211] [<ffffffffa0605a79>] ieee80211_open+0x59/0x60 [mac80211] [snip] -> #0 (&local->chanctx_mtx){+.+.+.}: [<ffffffff810d6cb7>] check_prevs_add+0x977/0x980 [<ffffffff810d95bb>] __lock_acquire+0xb3b/0x13b0 [<ffffffff810d9ee0>] lock_acquire+0xb0/0x1f0 [<ffffffff817eb9c8>] mutex_lock_nested+0x78/0x4f0 [<ffffffffa062e2f2>] ieee80211_vif_release_channel+0x42/0xb0 [mac80211] [<ffffffffa0609ec3>] ieee80211_set_monitor_channel+0x113/0x1b0 [mac80211] [<ffffffffa058fb37>] cfg80211_set_monitor_channel+0x77/0x2b0 [cfg80211] [<ffffffffa056e0b2>] __nl80211_set_channel+0x122/0x140 [cfg80211] [<ffffffffa0581374>] nl80211_set_wiphy+0x284/0xaf0 [cfg80211] [snip] other info that might help us debug this: Chain exists of: &local->chanctx_mtx --> &mvm->mutex --> &local->iflist_mtx Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&local->iflist_mtx); lock(&mvm->mutex); lock(&local->iflist_mtx); lock(&local->chanctx_mtx); *** DEADLOCK *** This deadlock actually occurs: INFO: task iw:3323 blocked for more than 120 seconds. Not tainted 3.14.3 #4 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. iw D ffff8800c8afcd80 4192 3323 3322 0x00000000 ffff880078fdb7e0 0000000000000046 ffff8800c8afcd80 ffff880078fdbfd8 00000000001d5540 00000000001d5540 ffff8801141b0000 ffff8800c8afcd80 ffff880078ff9e38 ffff880078ff9e38 ffff880078ff9e40 0000000000000246 Call Trace: [<ffffffff817ea841>] schedule_preempt_disabled+0x31/0x80 [<ffffffff817ebaed>] mutex_lock_nested+0x19d/0x4f0 [<ffffffffa06225cf>] ? ieee80211_iterate_active_interfaces+0x2f/0x60 [mac80211] [<ffffffffa06225cf>] ? ieee80211_iterate_active_interfaces+0x2f/0x60 [mac80211] [<ffffffffa052a680>] ? iwl_mvm_power_mac_update_mode+0xc0/0xc0 [iwlmvm] [<ffffffffa06225cf>] ieee80211_iterate_active_interfaces+0x2f/0x60 [mac80211] [<ffffffffa0529357>] _iwl_mvm_power_update_binding+0x27/0x80 [iwlmvm] [<ffffffffa0516eb1>] iwl_mvm_unassign_vif_chanctx+0x81/0xc0 [iwlmvm] [<ffffffffa062d3ff>] __ieee80211_vif_release_channel+0xdf/0x470 [mac80211] [<ffffffffa062e2fa>] ieee80211_vif_release_channel+0x4a/0xb0 [mac80211] [<ffffffffa0609ec3>] ieee80211_set_monitor_channel+0x113/0x1b0 [mac80211] [<ffffffffa058fb37>] cfg80211_set_monitor_channel+0x77/0x2b0 [cfg80211] [<ffffffffa056e0b2>] __nl80211_set_channel+0x122/0x140 [cfg80211] [<ffffffffa0581374>] nl80211_set_wiphy+0x284/0xaf0 [cfg80211] This fixes https://bugzilla.kernel.org/show_bug.cgi?id=75541 Cc: <stable@vger.kernel.org> [3.13+] Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-08Merge branch 'master' of ↵John W. Linville8-53/+53
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2014-05-07iwlwifi: pcie: disable interrupts upon PCIe allocEmmanuel Grumbach1-4/+6
In case RFKILL is in KILL position, the NIC will issue an interrupt straight away. This interrupt won't be sent because it is masked in the hardware. But if our interrupt service routine is called for another reason (SHARED_IRQ), then we'll look at the interrupt cause and service it. This can cause bad things if we are not ready yet. Explicitly clean the interrupt cause register to make sure we won't service anything before we are ready to. Cc: <stable@vger.kernel.org> [3.14] Reported-and-tested-by: Alexander Monakov <amonakov@gmail.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-06iwlwifi: mvm: do no sched scan while associatedDavid Spinadel3-0/+27
Currently the FW doesn't support sched scan while associated, Prevent it. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-06iwlwifi: mvm: rs - s/CPTCFG/CONFIGEmmanuel Grumbach1-1/+1
My bad - I forgot to update this when sending the patch upstream. Fixes: 87d5e4155c00 ("iwlwifi: mvm: rs: reinit rs if no tx for a long time") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-06iwlwifi: mvm: BT Coex - fix validity flags during initEmmanuel Grumbach1-3/+3
The commit below introduced a bug in the validity bits in init. Due to that, all the Coex mechanism stopped sending kills to the BT side. Fix that. Fixes: b9fae2d54c9f ("iwlwifi: mvm: BT Coex add support for Co-running block") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-04-30rtl8192cu: Fix unbalanced irq enable in error path of rtl92cu_hw_init()Ben Hutchings1-1/+1
Fixes: a53268be0cb9 ('rtlwifi: rtl8192cu: Fix too long disable of IRQs') Cc: stable@vger.kernel.org Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30rtlwifi: rtl8192se: Fix regression due to commit 1bf4bbbLarry Finger1-0/+6
Beginning with kernel 3.13, this driver fails on some systems. The problem was bisected to: Commit 1bf4bbb4024dcdab5e57634dd8ae1072d42a53ac Author: Felix Fietkau <nbd@openwrt.org> Title: mac80211: send control port protocol frames to the VO queue There is noting wrong with the above commit. The regression occurs because V0 queue on RTL8192SE cards uses priority 6, not the usual 7. The fix is to modify the rtl8192se routine that sets the correct transmit queue. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=74541 Reported-by: Alex Miller <almiller_1@yahoo.co.uk> Tested-by: Alex Miller <almiller_1@yahoo.co.uk> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [3.13+] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30ath9k: remove tid->paused flagFelix Fietkau3-17/+3
There are some corner cases where the driver could get stuck with a full tid queue that is paused, leading to a software tx queue hang. Since the tx queueing rework, pausing per-tid queues on aggregation session setup is no longer necessary. The driver will assign sequence numbers to buffered frames when a new session is established, in order to get the correct starting sequence number. mac80211 prevents new frames from entering the queue during setup. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30ath9k_hw: do not lower ANI setting below default on AR913xFelix Fietkau1-0/+6
When the amount of noise fluctuates strongly, low immunity settings can sometimes disrupt signal detection on AR913x chips. When that happens, no OFDM/CCK errors are reported anymore, and ANI tunes the radio to the lowest immunity settings. Usually rx/tx fails as well in that case. To fix this, keep noise immunity settings at or above ANI default level, which will keep radio parameters at or above INI values. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-25brcmfmac: Fix brcmf_chip_ai_coredisable not applying reset bits to BCMA_IOCTLHans de Goede1-2/+3
brcmfmac has been broken on my cubietruck with a BCM43362: brcmfmac: brcmf_chip_recognition: found AXI chip: BCM43362, rev=1 brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d since commit 53036261033: "brcmfmac: update core reset and disable routines". The problem is that since this commit brcmf_chip_ai_resetcore no longer sets BCMA_IOCTL itself before bringing the core out of reset, instead relying on brcmf_chip_ai_coredisable to do so. But brcmf_chip_ai_coredisable is a nop of the chip is already in reset. This patch modifies brcmf_chip_ai_coredisable to always set BCMA_IOCTL even if the core is already in reset. This fixes brcmfmac hanging in firmware loading on my board. Cc: stable@vger.kernel.org # v3.14 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-25ath9k: fix race in setting ATH_OP_INVALIDRajkumar Manoharan3-9/+3
The commit "ath9k: move sc_flags to ath_common" moved setting ATH_OP_INVALID flag below ieee80211_register_hw. This is causing the flag never being cleared randomly as the drv_start is called prior to setting flag. Fix this by setting the flag prior to register_hw. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22ath9k: add a recv budgetTim Harvey1-0/+4
Implement a recv budget so that in cases of high traffic we still allow other taskets to get processed. Without this, we can encounter a host of issues during high wireless traffic reception depending on system load including rcu stall's detected (ARM), soft lockups, failure to service critical tasks such as watchdog resets, and triggering of the tx stuck tasklet. The same thing was proposed previously by Ben: http://www.spinics.net/lists/linux-wireless/msg112891.html The only difference here is that I make sure only processed packets are counted in the budget by checking at the end of the rx loop. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22ath9k: fix possible hang on flushTim Harvey1-3/+2
If a flush is requested, make sure to clear the descriptor once we've processed it. This resolves a hang that will occur if all RX descriptors are full when a flush is requested. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22rtlwifi: rtl8188ee: initialize packet_beaconColin Ian King1-1/+1
static code analysis from cppcheck reports: [drivers/net/wireless/rtlwifi/rtl8188ee/trx.c:322]: (error) Uninitialized variable: packet_beacon packet_beacon is not initialized and hence packet_beacon contains garbage from the stack, so set it to false. Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: Stable <stable@vger.kernel.org> [3.10+] Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22rt2x00: fix beaconing on USBStanislaw Gruszka1-10/+12
When disable beaconing we clear register with beacon and newer set it back, what make we stop send beacons infinitely. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-15mwifiex: fix hung task on command timeoutAmitkumar Karwar1-3/+4
Sometimes when command timeout occurs due to a firmware or hardware bug, there may be some synchronous commands in command queue. These commands are never downloaded to firmware causing hung task warnings. This patch replaces wait_event_interruptible call with wait_event_interruptible_timeout to fix the issue. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-15mwifiex: process event before command responseAmitkumar Karwar1-6/+6
During extended scan, SCAN report event is always followed by command response. Sometimes It is observed that command response is processed before SCAN report which leads to a crash, because current command node is cleared while handling the response. This patch makes sure that driver's main thread gives priority to events over command responses. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Maithili Hinge <maithili@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-14wl18xx: align event mailbox with current fwEliad Peller1-0/+20
Some fields are missing from the event mailbox struct definitions, which cause issues when trying to handle some events. Add the missing fields in order to align the struct size (without adding actual support for the new fields). Reported-and-tested-by: Imre Kaloz <kaloz@openwrt.org> Cc: stable@vger.kernel.org # 3.14+ Fixes: 028e724 ("wl18xx: move to new firmware (wl18xx-fw-3.bin)") Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-14rsi: Fix a potential memory leak in rsi_send_auto_rate_request()Christian Engelmayer1-0/+1
Fix a potential memory leak in the error path of function rsi_send_auto_rate_request(). In case memory allocation for array 'selected_rates' fails, the error path exits and leaves the previously allocated skb in place. Detected by Coverity: CID 1195575. Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-14cw1200: Fix cw1200_debug_link_idFrederic Danis1-0/+2
This array is used in debug string to display cw1200_link_status defined in drivers/net/wireless/cw1200/cw1200.h. Add missing strings for CW1200_LINK_RESET and CW1200_LINK_RESET_REMAP. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-14wlcore: ignore dummy packet events in PLT modeLuciano Coelho1-0/+5
Sometimes the firmware sends a dummy packet event while we are in PLT mode. This doesn't make sense, it's a firmware bug. Fix this by ignoring dummy packet events when we're PLT mode. Reported-by: Yegor Yefremov <yegorslists@googlemail.com> Reported-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-14rsi: Fix a potential memory leak in rsi_set_channel()Christian Engelmayer1-10/+10
Fix a potential memory leak in function rsi_set_channel() that is used to program channel changes. The channel check block for the frequency bands directly exits the function in case of an error, thus leaving an already allocated skb unreferenced. Move the checks above allocating the skb. Detected by Coverity: CID 1195576. Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-14rsi: Add missing initialization of iiGeert Uytterhoeven1-1/+1
drivers/net/wireless/rsi/rsi_91x_core.c: In function ‘rsi_core_determine_hal_queue’: drivers/net/wireless/rsi/rsi_91x_core.c:91: warning: ‘ii’ may be used uninitialized in this function Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-14Merge branch 'for-john' of ↵John W. Linville7-109/+195
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2014-04-13iwlwifi: mvm: several fixes in scanAlexander Bondar2-45/+16
The firmware doesn't handle properly the fragmented scan. Stop using it. While at it change max_out_time and suspend_time units from usec to TUs as expected by firmware API. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-04-13iwlwifi: mvm: BT Coex - fix Look Up TableEmmanuel Grumbach1-6/+6
A few entries were wrong and this caused throughput issues. Cc: <stable@vger.kernel.org> [3.13+] Fixes: dac94da8dba3 ("iwlwifi: mvm: new BT Coex API") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-04-13iwlwifi: mvm: rs: clear per rate stats when aggregation changesEyal Shapira1-6/+8
The per rate stats should be cleared when aggregation state changes to avoid making rate scale decisions based on throughput figures which were collected prior to the aggregation state change and are now stale. While at it make sure any clearing of the per rate stats will get logged. Cc: <stable@vger.kernel.org> [3.14] Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-04-13iwlwifi: mvm: avoid searching unnecessary columnsEyal Shapira1-6/+6
Don't search columns which are unlikely to succeed as previous columns searched with less aggressive modulation failed. Cc: <stable@vger.kernel.org> [3.14] Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-04-13iwlwifi: mvm: rs: fallback to legacy Tx columnsEyal Shapira1-2/+28
Allow switching back to legacy Tx columns so we'll stop doing HT/VHT in case we're far from the AP. Stop active aggregation when making a deciding to stay in a legacy column. Despite having low legacy rates in the LQ table lower entries it doesn't help much in case we're doing aggregations as the aggregation was being transmitted in the initial rate of the table. This should help traffic stalls when far from the AP. Cc: <stable@vger.kernel.org> [3.14] Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-04-13iwlwifi: mvm: rs: reinit rs if no tx for a long timeEyal Shapira2-1/+22
After being idle for a long time (>5sec) the rs statistics will be stale so we prefer to reset rs and start from legacy rates again. This gives better results when the attenuation increased signficantly (e.g. we got further from the AP) and after a while we start Tx Note that the first Tx after the idle period will still go out in the old modulation and rate but this seemed a simpler approach compared to adding a timer or modifying mac80211 for this. The negative impact is negligble as we'll recover quickly. Cc: <stable@vger.kernel.org> [3.14] Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-04-13iwlwifi: mvm: rs: fix and cleanup rs_get_rate_actionEyal Shapira2-68/+60
Change the down/upscale decision logic a bit to be based on different success ratio thresholds. This fixes the implementation compared to the rate scale algorithm which was planned to yield optimal results. Also fix a case where a lower rate wasn't explored despite being a potential for better throughput. While at it rewrite rs_get_rate_action to be more clear and clean. Cc: <stable@vger.kernel.org> [3.14] Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-04-13iwlwifi: mvm: rs: use correct max expected throughput figuresEyal Shapira2-16/+51
The selection of the max expected throughput for a column didn't take into account the maximal allowed rate for the current peer. This can cause unnecessary switches during the search cycle to columns which have no chance of beating the current throughput. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-04-13iwlwifi: add MODULE_FIRMWARE for 7265Emmanuel Grumbach1-0/+1
It was missing. Cc: <stable@vger.kernel.org> [3.13+] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-14 01:48:13 +0300