summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/zd1211rw
AgeCommit message (Collapse)AuthorFilesLines
2011-04-13Merge branch 'master' of ↵John W. Linville9-695/+710
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/ath/ar9170/main.c drivers/net/wireless/ath/ar9170/phy.c drivers/net/wireless/zd1211rw/zd_rf_rf2959.c
2011-04-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2-2/+19
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (34 commits) net: Add support for SMSC LAN9530, LAN9730 and LAN89530 mlx4_en: Restoring RX buffer pointer in case of failure mlx4: Sensing link type at device initialization ipv4: Fix "Set rt->rt_iif more sanely on output routes." MAINTAINERS: add entry for Xen network backend be2net: Fix suspend/resume operation be2net: Rename some struct members for clarity pppoe: drop PPPOX_ZOMBIEs in pppoe_flush_dev dsa/mv88e6131: add support for mv88e6085 switch ipv6: Enable RFS sk_rxhash tracking for ipv6 sockets (v2) be2net: Fix a potential crash during shutdown. bna: Fix for handling firmware heartbeat failure can: mcp251x: Allow pass IRQ flags through platform data. smsc911x: fix mac_lock acquision before calling smsc911x_mac_read iwlwifi: accept EEPROM version 0x423 for iwl6000 rt2x00: fix cancelling uninitialized work rtlwifi: Fix some warnings/bugs p54usb: IDs for two new devices wl12xx: fix potential buffer overflow in testmode nvs push zd1211rw: reset rx idle timer from tasklet ...
2011-04-08Merge branch 'master' of ↵John W. Linville2-2/+19
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/rtlwifi/efuse.c drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c net/bluetooth/mgmt.c
2011-04-07zd1211rw: rename CR* macros to ZD_CR*Jussi Kivilinna9-695/+710
With compat-wireless CR* macros in zd_usb.h conflict with CR macros in include/asm-generic/termbits.h. So rename CR* macros to ZD_CR*. Conversion was done with using sed and then 'over 80 character line' checkpatch.pl warnings and comment indents were fixed. Reported-by: Walter Goldens <goldenstranger@yahoo.com> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04zd1211rw: reset rx idle timer from taskletJussi Kivilinna2-1/+14
2.6.38 added WARN_ON(in_irq) in del_timer_sync that triggers on zd1211rw when reseting rx idle timer in urb completion handler. Move timer reseting to tasklet. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04zd1211rw: remove URB_SHORT_NOT_OK flag in zd_usb_iowrite16v_async()Jussi Kivilinna1-1/+5
Patch removes the bogus flag introduced by upstream commit eefdbec1ea8b7093d2c09d1825f68438701723cf. Old code had buffer length check that new code tried to handle with URB_SHORT_NOT_OK flag. With USB debugging enabled bogus flag caused usb_submit_urb fail. Remove URB_SHORT_NOT_OK flag and add buffer length check to urb completion handler. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=32092 Reported-by: Jonathan Callen <abcd@gentoo.org> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-31Fix common misspellingsLucas De Marchi2-2/+2
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds1-0/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (56 commits) route: Take the right src and dst addresses in ip_route_newports ipv4: Fix nexthop caching wrt. scoping. ipv4: Invalidate nexthop cache nh_saddr more correctly. net: fix pch_gbe section mismatch warning ipv4: fix fib metrics mlx4_en: Removing HW info from ethtool -i report. net_sched: fix THROTTLED/RUNNING race drivers/net/a2065.c: Convert release_resource to release_region/release_mem_region drivers/net/ariadne.c: Convert release_resource to release_region/release_mem_region bonding: fix rx_handler locking myri10ge: fix rmmod crash mlx4_en: updated driver version to 1.5.4.1 mlx4_en: Using blue flame support mlx4_core: reserve UARs for userspace consumers mlx4_core: maintain available field in bitmap allocator mlx4: Add blue flame support for kernel consumers mlx4_en: Enabling new steering mlx4: Add support for promiscuous mode in the new steering model. mlx4: generalization of multicast steering. mlx4_en: Reporting HW revision in ethtool -i ...
2011-03-21zd1211rw: TrendNet TEW-509UB id addedTõnu Samuel1-0/+1
Signed-off-by: Tõnu Samuel <tonu@jes.ee> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-21Merge branch 'trivial' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (25 commits) video: change to new flag variable scsi: change to new flag variable rtc: change to new flag variable rapidio: change to new flag variable pps: change to new flag variable net: change to new flag variable misc: change to new flag variable message: change to new flag variable memstick: change to new flag variable isdn: change to new flag variable ieee802154: change to new flag variable ide: change to new flag variable hwmon: change to new flag variable dma: change to new flag variable char: change to new flag variable fs: change to new flag variable xtensa: change to new flag variable um: change to new flag variables s390: change to new flag variable mips: change to new flag variable ... Fix up trivial conflict in drivers/hwmon/Makefile
2011-03-17net: change to new flag variablematt mooney1-3/+1
Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Acked-by: Sjur Braendeland <sjur.brandeland@stericsson.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-02-25mac80211: make tx() operation return voidJohannes Berg1-3/+2
The return value of the tx operation is commonly misused by drivers, leading to errors. All drivers will drop frames if they fail to TX the frame, and they must also properly manage the queues (if they didn't, mac80211 would already warn). Removing the ability for drivers to return a BUSY value also allows significant cleanups of the TX TX handling code in mac80211. Note that this also fixes a bug in ath9k_htc, the old "return -1" there was wrong. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Tested-by: Sedat Dilek <sedat.dilek@googlemail.com> [ath5k] Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> [rt2x00] Acked-by: Larry Finger <Larry.Finger@lwfinger.net> [b43, rtl8187, rtlwifi] Acked-by: Luciano Coelho <coelho@ti.com> [wl12xx] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-14zd1211rw: add unlikely to ZD_ASSERTJussi Kivilinna1-1/+1
Case assert is violated should be quite unlikely. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-14zd1211rw: move async iowrite16v up to callersJussi Kivilinna3-13/+37
Writing beacon to device happen through multiple write command calls. zd_usb_iowrite16v uses synchronous urb call and with multiple write commands in row causes high CPU usage. Make asynchronous zd_usb_iowrite16v_async available outside zd_usb.c and use where possible. This lower CPU usage from ~10% to ~2% on Intel Atom when running AP-mode with 100 TU beacon interval. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-14zd1211rw: use async urb for write commandJussi Kivilinna2-25/+142
Writing beacon to device happen through multiple write command calls. zd_usb_iowrite16v uses synchronous urb call and with multiple write commands in row causes high CPU usage. This patch makes zd_usb_iowrite16v use asynchronous urb submit within zd_usb.c. zd_usb_iowrite16v_async_start is used to initiate writing multiple commands to device using zd_usb_iowrite16v_async. Each URB is delayed and submitted to device by next zd_usb_iowrite16v_async call or by call to zd_usb_iowrite16v_async_end. URBs submitted by zd_usb_iowrite16v_async have URB_NO_INTERRUPT set and last URB send by zd_usb_iowrite16v_async_end does not. This lower CPU usage when doing writes that require multiple URBs. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-14zd1211rw: correct use of usb_bulk_msg on interrupt endpointsJussi Kivilinna1-12/+12
zd1211rw is using usb_bulk_msg() with usb_sndbulkpipe() on interrupt endpoint. However usb_bulk_msg() internally corrects this and makes interrupt URB. It's better to change usb_bulk_msgs in zd1211rw to usb_interrupt_msg for less confusion. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-05zd1211rw: add useful debug outputJussi Kivilinna1-1/+8
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-05zd1211rw: enable NL80211_IFTYPE_APJussi Kivilinna1-2/+5
It should be safe to enable AP-mode now. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-05zd1211rw: reset rx urbs after idle period of 30 secondsJussi Kivilinna2-3/+83
RX appears to freeze while idle. Resetting rx-urbs appears to be enough to fix this. Do reset 30 seconds after last rx. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-05zd1211rw: reset device when CR_BCN_FIFO_SEMAPHORE freezes in beacon setupJussi Kivilinna1-1/+12
When driver fails to acquire device semaphore lock, device usually freezes soon afterwards. So failing to acquire lock indicates us that not everything is going right in device/fw. So reset device when this happens. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-05zd1211rw: add TX watchdog and device resettingJussi Kivilinna5-4/+181
When doing transfers at high speed for long time, tx queue can freeze. So add tx watchdog. TX-watchdog checks for locked tx-urbs and reset hardware when such is detected. Merely unlinking urb was not enough, device have to be reseted. Hw settings are restored so that any open link will stay on after reset. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-05zd1211rw: collect driver settings and add function to restore theimJussi Kivilinna2-0/+72
We need HW hard reset later in patchset to reset device after TX-stall. Collect all settings that we have set to driver for later reset and add restore function. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-05zd1211rw: lower hw command timeoutsJussi Kivilinna1-4/+4
Device command timeouts are set up very high (1 sec) and this causes AP beacon to lock up for long for example. Checking timeouts on device it's easy to see that 1 sec timeout is not needed, when device fails to response longer timeout doesn't help: [ 473.074419] zd1211rw 1-1:1.0: print_times() Read times: [ 473.175163] zd1211rw 1-1:1.0: print_time() 0 - 10 msec: 1506 [ 473.176429] zd1211rw 1-1:1.0: print_time() 11 - 50 msec: 0 [ 473.177955] zd1211rw 1-1:1.0: print_time() 51 - 100 msec: 0 [ 473.180703] zd1211rw 1-1:1.0: print_time() 101 - 250 msec: 0 [ 473.182101] zd1211rw 1-1:1.0: print_time() 251 - 500 msec: 0 [ 473.183221] zd1211rw 1-1:1.0: print_time() 500 - 1000 msec: 20 [ 473.184381] zd1211rw 1-1:1.0: print_time() 1000 - ... msec: 18 Also vendor driver doesn't use this long timeout. Therefore change timeout to 50msec. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-05zd1211rw: change interrupt URB buffer to DMA bufferJussi Kivilinna2-13/+25
As might lower beacon update CPU usage. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-05zd1211rw: use stack and preallocated memory for small cmd-buffersJussi Kivilinna3-44/+41
Use stack for allocing small < 64 byte arrays in zd_chip.c and preallocated buffer in zd_usb.c. This might lower CPU usage for beacon setup. v2: - Do not use stack buffers in zd_usb.c as they would be used for urb transfer_buffer. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-05zd1211rw: batch beacon config commands togetherJussi Kivilinna1-15/+25
Beacon config function writes beacon to hw one write per byte. This is very slow (usually taking more than 100ms to finish) and causes high CPU usage when in AP-mode (kworker at ~50% on Intel Atom N270). By batching commands together zd_mac_config_beacon() runtime can be lowered to 1/5th and lower CPU usage to saner levels (<10% on Atom). Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-05zd1211rw: add beacon watchdog and setting HW beacon more failsafeJussi Kivilinna2-31/+170
When doing tx/rx at high packet rate (for example simply using ping -f), device starts to fail to respond to control messages. On non-AP modes this only causes problems for LED updating code but when we are running in AP-mode we are writing new beacon to HW usually every 100ms. Now if control message fails in HW beacon setup, device lock is kept locked and beacon data partially written. This can and usually does cause: 1. HW beacon setup fail now on, as driver cannot acquire device lock. 2. Beacon-done interrupt stop working as device has incomplete beacon. Therefore make zd_mac_config_beacon() always try to release device lock and add beacon watchdog to restart beaconing when stall is detected. Also fix zd_mac_config_beacon() try acquiring device lock for max 500ms, as what old code appeared to be trying to do using loop and msleep(1). Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-05zd1211rw: implement beacon fetching and handling ieee80211_get_buffered_bc()Jussi Kivilinna1-4/+35
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-05zd1211rw: let zd_set_beacon_interval() set dtim_period and add AP-beacon flagJussi Kivilinna3-14/+40
Add support for AP-mode beacon. Also disable beacon when interface is set down as otherwise hw will keep flooding NEXT_BCN interrupts. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-05zd1211rw: fix ack_pending in filter_ack causing tx-packet ordering problem ↵Jussi Kivilinna1-0/+7
on monitor For reasons not very clear yet to me, filter_ack leaves matching tx-packet pending with 'ack_pending'. This causes tx-packet to be passed back to upper layer after next packet has been transfered and tx-packets might end up coming come out of monitor interface in wrong order vs. rx. Because of this when enable AP-mode, hostapd monitor interface would get packets in wrong order causing problems in WPA association. So don't use mac->ack_pending when in AP-mode. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-05zd1211rw: support setting BSSID for AP modeJussi Kivilinna4-11/+55
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-05zd1211rw: move set_rts_cts_work to bss_info_changedJussi Kivilinna2-25/+5
As bss_info_changed may sleep, we can as well set RTS_CTS register right away. Keep mac->short_preamble for later use (hw reset). Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-05zd1211rw: move set_multicast_hash and set_rx_filter from workers to ↵Jussi Kivilinna2-33/+7
configure_filter Workers not needed anymore since configure_filter may sleep. Keep mac->multicast_hash for later use (hw reset). Signed-off-by: Jussi Kivilinna <jussi.kivilina@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-05zd1211rw: fix beacon interval setupJussi Kivilinna1-6/+10
Vendor driver uses CR_BNC_INTERVAL at various places, one is HW_EnableBeacon() that combinies beacon interval with BSS-type flag and DTIM value in upper 16bit of u32. The other one is HW_UpdateBcnInterval() that set_aw_pt_bi() appears to be based on. HW_UpdateBcnInterval() takes interval argument as u16 and uses that for calculations, set_aw_pt_bi() uses u32 value that has flags and dtim in upper part. This clearly seems wrong. Also HW_UpdateBcnInterval() updates only lower 16bit part of CR_BNC_INTERVAL. So make set_aw_pt_bi() do calculations on only lower u16 part of s->beacon_interval. Also set 32bit beacon interval register before reading values from device, as HW_EnableBeacon() on vendor driver does. This is required to make beacon work on AP-mode, simply reading and then writing updated values is not enough at least with zd1211b. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-05zd1211rw: add locking for mac->process_intrJussi Kivilinna2-1/+7
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-05zd1211rw: cancel process_intr work on zd_chip_disable_int()Jussi Kivilinna1-0/+3
OOPS if worker is running and disconnect() is called (triggered by unpluging device). Much harder to trigger at this stage but later when we have AP beacon work in process_intr it happens very easy. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-05zd1211rw: use urb anchors for tx and fix tx-queue disablingJussi Kivilinna2-75/+41
When stress testing AP-mode I hit OOPS when unpluging or rmmodding driver. It appears that when tx-queue is disabled, tx-urbs might be left pending. These can cause ehci to call non-existing tx_urb_complete() (after rmmod) or uninitialized/reseted private structure (after disconnect()). Add skb queue for submitted packets and unlink pending urbs on zd_usb_disable_tx(). Part of the problem seems to be usb->free_urb_list that isn't always working as it should, causing machine freeze when trying to free the list in zd_usb_disable_tx(). Caching free urbs isn't what other drivers seem to be doing (usbnet for example) so strip free_usb_list. Patch makes tx-urb handling saner with use of urb anchors. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-08Merge branch 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds1-2/+1
* 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (33 commits) usb: don't use flush_scheduled_work() speedtch: don't abuse struct delayed_work media/video: don't use flush_scheduled_work() media/video: explicitly flush request_module work ioc4: use static work_struct for ioc4_load_modules() init: don't call flush_scheduled_work() from do_initcalls() s390: don't use flush_scheduled_work() rtc: don't use flush_scheduled_work() mmc: update workqueue usages mfd: update workqueue usages dvb: don't use flush_scheduled_work() leds-wm8350: don't use flush_scheduled_work() mISDN: don't use flush_scheduled_work() macintosh/ams: don't use flush_scheduled_work() vmwgfx: don't use flush_scheduled_work() tpm: don't use flush_scheduled_work() sonypi: don't use flush_scheduled_work() hvsi: don't use flush_scheduled_work() xen: don't use flush_scheduled_work() gdrom: don't use flush_scheduled_work() ... Fixed up trivial conflict in drivers/media/video/bt8xx/bttv-input.c as per Tejun.
2010-12-15workqueue: convert cancel_rearming_delayed_work[queue]() users to ↵Tejun Heo1-2/+1
cancel_delayed_work_sync() cancel_rearming_delayed_work[queue]() has been superceded by cancel_delayed_work_sync() quite some time ago. Convert all the in-kernel users. The conversions are completely equivalent and trivial. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: "David S. Miller" <davem@davemloft.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: netdev@vger.kernel.org Cc: Anton Vorontsov <cbou@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Neil Brown <neilb@suse.de> Cc: Alex Elder <aelder@sgi.com> Cc: xfs-masters@oss.sgi.com Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: netfilter-devel@vger.kernel.org Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: linux-nfs@vger.kernel.org
2010-11-29Merge branch 'for-davem' of ↵David S. Miller1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-11-29zd1211rw: document need for kmalloc castJoe Perches1-0/+1
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22zd1211rw: Use constJoe Perches1-2/+2
Mark arrays const that are unmodified after initializations. text data bss dec hex filename 19291 56 4136 23483 5bbb drivers/net/wireless/zd1211rw/zd_chip.o.old 19291 56 4136 23483 5bbb drivers/net/wireless/zd1211rw/zd_chip.o.new Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-15zd1211rw: add 2 missing usb id'smaximilian attems1-0/+2
"These USB ID came from Palnex <http://www.planex.co.jp/> Worked fine." says Mandriva patch for their 2.6.32 and earlier. Web has evidence for both id's to work, so just add them upstream: http://www.mail-archive.com/zd1211-devs@lists.sourceforge.net/msg00507.html http://ubuntuforums.org/showthread.php?t=473046 Signed-off-by: Go Taniguchi <go@turbolinux.co.jp> Signed-off-by: maximilian attems <max@stro.at> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-16zd1211rw: update fw version info in wiphy structJohn W. Linville1-0/+5
This makes the information available through ethtool... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-18Merge branch 'master' of ↵David S. Miller2-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-06-16zd1211rw: change ZD_REGDOMAIN_JAPAN_* namingJohn W. Linville2-4/+4
ZD_REGDOMAIN_JAPAN_ADD and ZD_REGDOMAIN_JAPAN_GW_US54GXS seem a little verbose to me... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16zd1211rw: add 0x49 -> JP regulatory domain mapKouhei Sutou2-0/+2
0x49 is used by PLANEX GW-US54GXS (2019:5303). Signed-off-by: Kouhei Sutou <kou@clear-code.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-11Merge branch 'master' of ↵David S. Miller2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: drivers/net/wireless/wl12xx/wl1271.h drivers/net/wireless/wl12xx/wl1271_cmd.h
2010-06-03drivers/net: use __packed annotationEric Dumazet2-13/+13
cleanup patch. Use new __packed annotation in drivers/net/ Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-03wireless: fix several minor description typosWalter Goldens2-2/+2
Signed-off-by: Walter Goldens <goldenstranger@yahoo.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-30 02:08:06 +0300