summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/wl12xx
AgeCommit message (Collapse)AuthorFilesLines
2011-05-17Merge branch 'master' of ↵John W. Linville20-294/+1578
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-agn-tx.c net/mac80211/sta_info.h
2011-05-13wl12xx: enter/exit psm on wowlan suspend/resumeEliad Peller4-0/+91
When operating as station, enter psm before suspending the device into wowlan state. Add a new completion event to signal when psm was entered successfully. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-13wl12xx_sdio: declare support for NL80211_WOW_TRIGGER_ANYTHING triggerEliad Peller1-0/+8
Since wowlan requires the ability to stay awake while the host is suspended, declare support for NL80211_WOW_TRIGGER_ANYTHING if the MMC_PM_KEEP_POWER capability is being supported. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-13wl12xx: prevent scheduling while suspending (WoW enabled)Eliad Peller3-0/+72
When WoW is enabled, the interface will stay up and the chip will be powered on, so we have to flush/cancel any remaining work, and prevent the irq handler from scheduling a new work until the system is resumed. Add 2 new flags: * WL1271_FLAG_SUSPENDED - the system is (about to be) suspended. * WL1271_FLAG_PENDING_WORK - there is a pending irq work which should be scheduled when the system is being resumed. In order to wake-up the system while getting an irq, we initialize the device as wakeup device, and calling pm_wakeup_event() upon getting the interrupt (while the system is about to be suspended) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-13wl12xx_sdio: set MMC_PM_KEEP_POWER flag on suspendEliad Peller1-1/+28
if a wow trigger was configured, set the MMC_PM_KEEP_POWER flag on suspend, so our power will be kept while the system is suspended. We needed to set this flag on each suspend attempt (when we want to keep power) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-13wl12xx: declare suspend/resume callbacks (for wowlan)Eliad Peller2-0/+25
Additionally, add wow_enabled field to wl, to indicate whether wowlan was configured. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-13wl12xx_sdio: set interrupt as wake_up interruptEliad Peller1-0/+3
set the sdio interrupt as wake_up interrupt, so we will be able to wake up the suspended system (Wake-On-Wireless) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-13wl12xx: remove unused flag WL1271_FLAG_IDLE_REQUESTEDLuciano Coelho1-1/+0
This flag is not used anymore, remove it from the list. Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-13wl12xx: prevent sched_scan when not idle or not in station modeLuciano Coelho1-0/+6
The current firmware only supports scheduled scan in station mode and when idle. To prevent the firmware from crashing, return -EOPNOTSUPP when sched_scan start is called in an invalid state. Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-13wl12xx: export scheduled scan state in debugfsLuciano Coelho1-0/+1
Add the sched_scanning value to the driver_status debugfs entry. Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-13wl12xx: implement scheduled scan driver operations and reportingLuciano Coelho4-1/+83
This patch adds the mac80211 operations for scheduled scan and the scheduled scan results reporting. Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-13wl12xx: add scheduled scan structures and commandsLuciano Coelho2-0/+347
Add firmware command structures, definitions and code to to configure, start and stop scheduled scans. Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-13wl12xx: listen to scheduled scan eventsLuciano Coelho2-1/+13
Subscribe and listen to PERIODIC_SCAN_REPORT_EVENT_ID and PERIODIC_SCAN_COMPLETE_EVENT_ID in preparation for the scheduled scan implementation. Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-13wl12xx: add configuration values for scheduled scanLuciano Coelho2-0/+30
Add the structures and values for driver-configured scheduled scan parameters. Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-13wl12xx: add IEEE80211_HW_SPECTRUM_MGMT bit to the hw flagsShahar Levi1-0/+1
Set the spectrum management bit in the hw flags so that mac80211 will set the WLAN_CAPABILITY_SPECTRUM_MGMT bit in association requests (which in practice means that we support 802.11h spectrum management). [Reworded the commit log -- Luca.] Signed-off-by: Shahar Levi <shahar_levi@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-13wl12xx: Don't filter beacons that include changed HT IEsShahar Levi1-2/+6
This patch adds a beacon filter rule to pass up the beacons that contain changed HT information elements. These beacons need to be passed to mac80211 so that it can act on such changes. [Reworded commit log -- Luca.] Signed-off-by: Shahar Levi <shahar_levi@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-13wl12xx: simplify wl1271_ssid_set()Eliad Peller1-11/+15
Simplify wl1271_ssid_set by re-using cfg80211_find_ie instead of reimplementing it. Additionally, add a length check to prevent a potential buffer overflow. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-05Merge branch 'master' of ↵John W. Linville28-301/+1425
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/libertas/if_cs.c drivers/net/wireless/rtlwifi/pci.c net/bluetooth/l2cap_sock.c
2011-05-02Revert "wl12xx: support FW TX inactivity triggers"Luciano Coelho10-125/+17
This reverts commit 47684808fd89d6809c0886e06f8ac324252499d8. Conflicts: drivers/net/wireless/wl12xx/conf.h drivers/net/wireless/wl12xx/main.c
2011-05-02wl12xx: export driver state to debugfsArik Nemtsov1-0/+87
By reading the "driver_state" debugfs value we get all the important state information from the wl12xx driver. This helps testing and debugging, particularly in situations where the driver seems "stuck". Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: fix race condition during recovery in AP modeArik Nemtsov3-9/+22
When operating as AP, the TX queues are not stopped when we start recovery. mac80211 is notified only after the fact. When there is pending TX, it will be queued even after the FW is down. This leads to situations where the TX queues are stopped (because of the TX-watermark mechanism), and are never woken up when we return from recovery. Fix this by explicitly stopping the TX queues when before initiating recovery. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: add debugfs entry for starting recoveryArik Nemtsov1-0/+20
This entry is useful for debugging the driver state machine during recovery. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: AP-mode - reconfigure templates after basic rates changeArik Nemtsov3-1/+11
When there's a change in the basic rates of the AP, reconfigure relevant templates with the new rates. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: AP-mode - overhaul rate policy configurationArik Nemtsov5-85/+65
Use the minimal rate configured in the basic rates set as the AP broadcast and multicast rate. The minimal rate is used to ensure weak links can still communicate. When the basic rates contains at least one OFDM rate, configure all unicast TX rates to OFDM only. Unify rate configuration on initialization and on change notification into a single function. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: print firmware program counter during recoveryArik Nemtsov1-1/+2
When performing recovery, print the firmware version and program counter (by reading the SCR_PAD4 register). The value of the firmware program counter during assert can be useful for debugging. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: schedule recovery on command timeoutArik Nemtsov1-3/+6
We use a long timeout (2 seconds) when sending commands to the FW. When a command times out, it means the FW is stuck, and we should commence recovery. This should make recovery times shorter as we'll recover on the first timeout indication. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: AP-mode - disable beacon filtering on start upArik Nemtsov3-1/+42
New AP-mode FWs filter external beacons by default. Disable this filtering on start up so we can properly configure ERP protection. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: use wiphy values for setting rts, frag thresholds on initArik Nemtsov4-13/+27
Use the wiphy RTS and fragmentation thresholds for initializing the FW when possible. This mitigates a bug where previously set values are forgotten after interface down/up. Add checks before settings these values to ensure they are valid. Use default values when invalid thresholds are configured. Update the default RTS threshold to the maximum value given by the specification. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: add BT-coexistance for APArik Nemtsov5-17/+146
Initialize AP specific BT coexitance parameters to default values and enable them in AP mode. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: strict_stroul introduced converted to kstrtoulLuciano Coelho1-2/+2
One new patch applied added a couple of new strict_strtoul calls. Converted those to kstroul(). Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: do not set queue_mapping directlyHauke Mehrtens1-1/+1
It is preferred to use the setter that to set queue_mapping directly. This also helps backporting in compat-wireless. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: discard corrupted packets in RXArik Nemtsov1-7/+26
When packets arrive with a RX descriptor indicating corruption, discard them. In general white-list the RX descriptor status to prevent rouge data from being sent up. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: implement the tx_frames_pending mac80211 callbackArik Nemtsov1-0/+23
Frames are considered pending when they reside in the driver TX queue or already queued in the FW. This notion of "pending" is appropriate for power save considerations in STA mode, but not necessarily in other modes (for instance P2P-GO). [Fixed a sparse warning about missing "static" in a function declaration -- Luca] Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: Enable dynamic memory for 127xIdo Yariv1-1/+1
The FW can dynamically manage its internal TX & RX memory pools, moving blocks from one pool to another when necessary. This can significantly improve performance. Currently this feature is enabled only for 128x. Enable dynamic memory for 127x as well. Other parameters in the memory configuration structure may need to be fine tuned, as the optimal values for these may change once dynamic memory is enabled. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: Restart TX when TX descriptors are availableIdo Yariv1-0/+3
The driver stops sending TX packets when either there aren't enough memory blocks, or it runs out of TX descriptors. The driver continues to send packets to the FW only when more memory blocks are available. The FW might free TX descriptors without freeing the corresponding memory blocks, especially when dynamic memory is enabled. In cases where memory blocks are not freed at all, the driver will keep waiting for more memory blocks indefinitely. Fix this by clearing the WL1271_FLAG_FW_TX_BUSY flag when there are available TX descriptors. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: Modify memory configuration for 128x/APIdo Yariv1-7/+15
The 128x/AP firmware does not yet support dynamic memory. Temporarily, the memory configuration for the 127x was used both for 127x/AP as well as 128x/AP. Since the two chips don't have the same number of memory blocks, TP was significantly degraded. This hasn't been fine tuned yet, but using the base 128x numbers (without dynamic memory) seems to yield much better results (around 30% more). Additional fine tuning will be required in the future. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: add debugfs entries for dtim_interval and beacon_intervalEliad Peller1-0/+132
When configuring ACX_WAKE_UP_CONDITIONS (before entering psm), we tell the firmware to wake up once in N DTIMs/beacons. Allow control of this value via debugfs (for debugging purposes). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: Update Power Save Exit Retries PacketsShahar Levi1-1/+1
Reducing the retries of sending PS exit packets to the peer AP. That fix is to avoid sending unrealizable number of PS exit packets in case of ap lost. Signed-off-by: Shahar Levi <shahar_levi@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: FM WLAN coexistenceShahar Levi5-0/+137
Add support to FM WLAN coexistence (STA only). Some WiFi harmonics may interfere with FM operation, to avoid this problem special coexistence techniques are activated around some FM frequencies. Signed-off-by: Shahar Levi <shahar_levi@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: configure rates when working in ibss modeEliad Peller2-0/+25
When working in ibss mode, we don't configure rate policy per station (as we use the same link for multiple stations), so currently the 1mb/s rate is being used. Instead, configure the firmware to use the whole 11b rates by default. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: avoid redundant join on interface reconfigurationEliad Peller1-3/+7
ieee80211_reconfig() sets most of the "changed" flags regardless of the actual change (e.g. BSS_CHANGED_ASSOC will be set even if the interface is still not associated). in this case the driver will issue some unneeded commands. Since the driver relies solely on the BSS_CHANGED_ASSOC flag, without checking if there was an actual change, it will end up issuing unjoin() and dummy_join() commands, although it was never associated and should just remain idle. Avoid it by checking the actual state change, in addition to the "changed" flag. (there seem to be more redundant configuration commands being issued, but they shouldn't harm) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: print actual rx packet size (without padding)Eliad Peller1-1/+2
When debugging, reduce the padding size from each rx packet, to get the actual packet size (so comparing it against a cap file will be easier) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: Set correct REF CLK and TCXO CLK values to the FWShahar Levi1-0/+7
Fix mismatch between the REF CLK and TCXO CLK information that is set in the platform data and the NVS, so we override what comes from the NVS and replace it with what comes from the platform data. [Small fix in a comment -- Luca] Signed-off-by: Shahar Levi <shahar_levi@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: avoid premature elp entranceEliad Peller2-6/+25
The elp_work is being enqueued on wl1271_ps_elp_sleep, but doesn't get cancelled on wl1271_ps_elp_wakeup. This might cause immediate entrance to elp when the wl->mutex is being released, rather than using the delayed enqueueing optimization. Cancel elp_work on wakeup request, and add a new WL1271_FLAG_ELP_REQUESTED flag to further synchronize the elp actions. [Fixed a couple of typos in some comments -- Luca] Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: sleep instead of wakeup after tx workEliad Peller1-1/+1
commit d05c806 ("wl12xx: rearrange some ELP wake_up/sleep calls") introduced a bug in which wl1271_ps_elp_wakeup() was called instead of wl1271_ps_elp_sleep() after completing the tx work. Reported-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: Set End-of-transaction Flag at Wl127x AP ModeShahar Levi1-0/+4
End-of-transaction flag should be set when working with wl127x chip on AP mode. Thanks Ido Yariv <ido@wizery.com> for the guidance with that. Signed-off-by: Shahar Levi <shahar_levi@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-04-28wl12xx: support FW TX inactivity triggersArik Nemtsov10-17/+125
In AP mode we register for the MAX_TX_RETRY and INACTIVE_STA events. Both are reported to the upper layers as a TX failure in the offending stations. In STA mode we register only for the MAX_TX_RETRY event. A TX failure is interpreted as a loss of connection. Support for IEEE80211_HW_REPORTS_TX_ACK_STATUS has been removed to avoid the inherent race condition of a mac80211 TX failure counter in addition to the FW counter. This patch depends on "mac80211: allow low level driver to report packet loss" Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-19wl12xx: fix sparse warning about undeclared wl12xx_alloc_dummy_packetLuciano Coelho1-1/+1
Fix sparse warning: CHECK drivers/net/wireless/wl12xx/main.c drivers/net/wireless/wl12xx/main.c:1246:17: warning: symbol 'wl12xx_alloc_dummy_packet' was not declared. Should it be static? Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-04-19wl12xx: remove unused conf_radio_params structureLuciano Coelho1-9/+0
This structure has not been used anymore since commit e6b190ff3c2f4e4859502c41fa17b5c595e82000. Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-04-19wl12xx: move hardcoded hci_io_ds value into the conf structLuciano Coelho4-5/+10
Instead of hardcoding the hci_io_ds configuration that we write to the SDIO_IO_DS top registed, read it from the default configuration so that it's easier to change for different platforms. Reported-by: Ido Yariv <ido@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-24 18:01:27 +0300