summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/wl12xx/wl1271_tx.c
AgeCommit message (Collapse)AuthorFilesLines
2010-11-22wl1271: Change wl12xx Files NamesShahar Levi1-485/+0
All files name prefix removed due to the fact that wl12xx driver supports wl1271 and wl1273. Also the definition in Kconfig and header files changed respectively. Signed-off-by: Shahar Levi <shahar_levi@ti.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
2010-11-15wl1271: exit ELP mode when setting enabled rates in txLuciano Coelho1-0/+5
This bug was being triggered by a call to acx_rate_policies in tx_work without calling ps_elp_wakeup first. If we have full PSM enabled, this happens rather often, immediately after association. Reported-by: Tuomas Katila <ext-tuomas.2.katila@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Tested-by: Tuomas Katila <ext-tuomas.2.katila@nokia.com>
2010-11-15wl1271: Fix warning about unsupported RX rateTeemu Paasikivi1-1/+1
While scanning, it is possible that beacon and probe response frames are received on other band than configured to the driver. In rx status handling this has caused "Unsupported RX rate from HW" warnings. This patch changes the wl1271_rate_to_index function to take the band of the received frame as a parameter instead of using value configuret to wl->band. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
2010-11-15wl1271: 11n Support, functionality and configuration abilityShahar Levi1-0/+11
Add 11n ability in scan, connection and using MCS rates. The configuration is temporary due to the code incomplete and still in testing process. That plans to be remove in the future. Signed-off-by: Shahar Levi <shahar_levi@ti.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
2010-11-15wl1271: Fix TX queue low watermark handlingIdo Yariv1-13/+22
The number of entries in the TX queue is compared to the low watermark value each time TX completion interrupts are handled. However, the fact that a TX completion arrived does not necessarily mean there are any less skbs in the TX queue. In addition, a TX completion interrupt does not necessarily mean that there are any new available TX blocks. Thus, queuing TX work when the low watermark is reached might not be needed. Fix this by moving the low watermark handling to the TX work function, and avoid queuing TX work in this case. Signed-off-by: Ido Yariv <ido@wizery.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
2010-11-15wl1271: Allocate TX descriptors more efficientlyIdo Yariv1-16/+22
On each TX descriptor allocation, a free entry is found by traversing the TX descriptors array. Improve this by holding a bitmap of all TX descriptors, and using efficient bit operations to search for free entries. Signed-off-by: Ido Yariv <ido@wizery.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
2010-11-15wl1271: Fix TX starvationIdo Yariv1-4/+10
While wl1271_irq_work handles RX directly (by calling wl1271_rx), a different work is scheduled for transmitting packets. The IRQ work might handle more than one interrupt during a single call, including multiple TX completion interrupts. This might starve TX, since no packets are transmitted until all interrupts are handled. Fix this by calling the TX work function directly, instead of deferring it. Signed-off-by: Ido Yariv <ido@wizery.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
2010-11-15wl1271: TX aggregation optimizationIdo Yariv1-8/+19
In case the aggregation buffer is too small to hold all available packets, the buffer is transferred to the FW and no more packets are aggregated. Although there may be enough available TX blocks, no additional packets will be handled by the current TX work. Fix this by flushing the aggregation buffer when it's full, and continue transferring packets as long as there are enough available TX blocks. Signed-off-by: Ido Yariv <ido@wizery.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
2010-10-05wl1271: Support firmware TX packet aggregationIdo Yariv1-62/+37
Instead of sending one packet at a time to the firmware, try to send all available packets at once. This optimization decreases the number of transactions, which saves CPU cycles and increases network throughput. Signed-off-by: Ido Yariv <ido@wizery.com> Tested-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
2010-09-28wl1271: Fix tid-configuration of TX framesJuuso Oikarinen1-2/+2
Incorrect TID was configured for TX frames. This resulted in incorrect queues to be used for classes in transmission. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
2010-09-28wl1271: Remove outdated FIXME'sJuuso Oikarinen1-2/+0
Remove outdated FIXME's from the code. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
2010-08-17mac80211: use cipher suite selectorsJohannes Berg1-2/+2
Currently, mac80211 translates the cfg80211 cipher suite selectors into ALG_* values. That isn't all too useful, and some drivers benefit from the distinction between WEP40 and WEP104 as well. Therefore, convert it all to use the cipher suite selectors. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-03wl1271: Flush TX buffers to air before going to idleJuuso Oikarinen1-3/+33
The mac80211 changes to idle almost immediately after transmitting some frames, such as deauth etc. When going to idle, the wl1271 is disconnected, which causes TX frames already on buffers, but not yet transmitted, to be deleted. To make sure deauth frames reach the air, allow the TX buffers to flush before proceeding to idle. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07wl1271: Fix tx queue flushingJuuso Oikarinen1-17/+1
This patch modifies tx-queue flushing to correspond with tx-path - i.e. also frames for which no ack was requested are forwarded to the mac80211 for disposal. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07wl1271: Use minimum rate for each band for control messagesJuuso Oikarinen1-1/+1
Currently the mac80211 is not telling a hardware rate controlled driver a rate to use for association frames etc. So to be safe, use the lowest rate of each band for communication. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31wl1271: Fix memory leak in firmware crash scenarioJuuso Oikarinen1-3/+7
The driver tx-queue flush operation leaks broadcast-frames. This leak occurs if the driver is shut down while there are frames in TX buffers (such as in a firmware crash scenario.) Fix the leak. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31wl1271: Add TX rate reportingJuuso Oikarinen1-12/+15
Add reporting of the used TX rate to mac80211 in the tx_status. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-09wl1271: Disable host TX rate controlJuuso Oikarinen1-0/+2
Disable host TX rate control. The wl1271 firmware is already managing rate control, so this eliminate unnecessary host processing. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-09wl1271: Clean up TX security sequence number handlingJuuso Oikarinen1-8/+2
Instead of managing the TX security sequence number as two variables, use one 64 bit variable. This greatly simplifies the handling of the number. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-09wl1271: Clean up firmware block allocation calculationJuuso Oikarinen1-7/+3
This patch simplifies the required block count calculation. Though it introduces a division operator, it greatly simplifies the formula. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-09wl1271: Update TX packet life time handling with higher resolution timeJuuso Oikarinen1-2/+5
This patch uses a higher precision timer to synchronize with the firmware clock. Improved precision is needed as on some platforms a jiffy may be up to tens of milliseconds, and the required precision is closer to TU's. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-09wl1271: Fix queue stopping/waking for TX pathJuuso Oikarinen1-13/+15
The queue stopping/waking functionality was broken in a way that could cause huge latencies in TX transfers and even cause the TX to stall in the right circumstances. Correct these problems. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-09wl1271: Improvements to the TX pathJuuso Oikarinen1-15/+23
- Fix a TX result overflow problem that was present in the TX path and visible with at least linksys AP's (probably any AP with high throughput capability.) - Optimize TX by writing FW trigger for a group of TX frames instead of each and every frame. - Slightly optimize the TX path code. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-09wl1271: Removed wl1271_spi.h and made some functions staticTeemu Paasikivi1-1/+0
Removed wl1271_spi.h header as there's no more need to access functions declared there outside of wl1271_spi.c. Also made those SPI access functions static. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19wl1271: Renamed IO functionsTeemu Paasikivi1-8/+9
In preparation for integration of SDIO implementation renamed some IO functions from wl1271_spi_* form to wl1271_*. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19wl1271: Fix WEP key handlingJuuso Oikarinen1-0/+1
WEP key index handling was broken: the default key when using key 0 was never specified to the FW, and if using other default than 0, it would be set on the TX path for every single TX'd frame. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19wl1271: implement WMMKalle Valo1-4/+6
Now that necessary commands for WMM are implemented, implement queue handling for WMM. But WMM is not enabled yet, only one queue is used. Based on a similar patch from wl1251. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-29wl1271: Change booleans in struct wl1271 into a flags bitmaskJuuso Oikarinen1-3/+3
For cleaner implementation, change the bunch of booleans in the struct wl1271 structure into a flags bitmask. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-29wl1271: Fix supported rate managementJuuso Oikarinen1-0/+37
Previously, only basic rates were used for data transmission - resulting in reduced transfer rates. This patch takes enables the firmware to take advantage of the full set of data rates supported by the AP. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1271: fix endianess issuesLuciano Coelho1-9/+13
We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1271: Remove outdated SPI functionsJuuso Oikarinen1-5/+5
With the change to the new firmware, there was a change to firmware memory partitioning. Along with that change, the translation of all partitions was unified, and separate functions for reg and mem access became unnecessary. Cleanup the unnecessary functions. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1271: Update TX path block calucation algoJuuso Oikarinen1-2/+2
Update the TX path block calculation algorithm based on TI reference. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1271: Corrections to TX pathJuuso Oikarinen1-5/+3
Corrections to the TX path - use correct number of maximum descriptors (32 instead of 16) and correct checking and setting of excessive retries on completion. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1271: Correct TKIP header space handling in TX pathJuuso Oikarinen1-10/+17
Correct the position to which TKIP header space is appended for TX packets. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1271: Security sequence number handling for TX (for WPA)Juuso Oikarinen1-0/+11
Add security sequence number handling to the driver TX data path needed by WPA. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1271: Correction to TX block allocation calculationJuuso Oikarinen1-1/+1
Correct the TX path implementation to allocate sufficient blocks in the firmware for TX packets. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1271: add wl1271 driver filesLuciano Coelho1-0/+378
This driver supports the wl1271 chipset from Texas Instruments based on the WiLink(tm) 6.0 mobile platform. Support for wl1273 should be relatively easy to add. This chipset is designed for embedded devices, with good powersaving capabilities. The wl1271 chipset is the successor of wl1251 and supports the 802.11b/g/n standards, but currently this driver supports only b/g. More information about this chipset can be found here: http://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?templateId=6123&navigationId=12762&contentId=29993 Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-25 23:20:15 +0300