summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ti/wl12xx
AgeCommit message (Collapse)AuthorFilesLines
2013-10-23wlcore/wl18xx/wl12xx: FW log params per chip archIgal Chernobelsky1-0/+9
FW memory block size and FW log end marker parameters are added to wl structure and are initialized per chip architecture. convert_hwaddr hw operation is added to convert chip dependent FW internal address. Copy from FW log is also simplified to copy the entire memory block as FW logger utility is repsponsible for parsing of FW log content. Signed-off-by: Igal Chernobelsky <igalc@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-23wl12xx/wl18xx: update default fw logger's settingsIdo Reis1-2/+2
update the fw logger mode to continuous, and output to dbgpins (uart). Signed-off-by: Ido Reis <idor@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-23wlcore: add ap_event_maskEliad Peller1-1/+2
Add new ap_event_mask field, to indicate events that should be unmasked only when there's an ap interface. This is done in order to avoid spurious wakeups when we don't care about the incoming event anyway. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-09-26wireless: wl12xx: use dev_get_platdata()Jingoo Han1-1/+1
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12wl12xx/wl18xx: scan all 5ghz channelsEliad Peller1-1/+1
Due to a typo, the current code copies only sizeof(cmd->channels_2) bytes, which is smaller than the correct sizeof(cmd->channels_5) size, resulting in a partial scan (some channels are skipped). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12wl12xx: increase minimum singlerole firmware version requiredLuciano Coelho1-2/+2
The minimum firmware version required for singlerole after recent driver changes is 6/7.3.10.0.133. Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12wl12xx: fix minimum required firmware version for wl127x multiroleLuciano Coelho1-1/+1
There was a typo in commit 8675f9 (wlcore/wl12xx/wl18xx: verify multi-role and single-role fw versions), which was causing the multirole firmware for wl127x (WiLink6) to be rejected. The actual minimum version needed for wl127x multirole is 6.5.7.0.42. Reported-by: Levi Pearson <levipearson@gmail.com> Reported-by: Michael Scott <hashcode0f@gmail.com> Cc: stable@kernel.org # 3.9+ Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22Merge remote-tracking branch 'wireless-next/master' into mac80211-nextJohannes Berg2-0/+3
2013-04-16mac80211: support secondary channel offset in CSAJohannes Berg1-1/+1
Add support for the secondary channel offset IE in channel switch announcements. This is necessary for proper handling of CSA on HT access points. For this to work it is also necessary to convert everything here to use chandef structs instead of just channels. The driver updates aren't really correct though. In particular, the TI wl18xx driver update can't possibly be right since it just ignores the new channel width for lack of firmware API. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-25wlcore: set max num of Rx BA sessions per chipIgal Chernobelsky2-0/+3
Maximum number of supported RX BA sessions depends on chip type. wl18xx supports 5 RX BA sessions while wl12xx supports 3. Signed-off-by: Igal Chernobelsky <igalc@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-02-08wlcore: remove if_ops from platform_dataLuciano Coelho1-1/+2
We can't pass pointers from the platform data to the modules, because with DT it cannot be done. Those pointers are not set by the board files anyway. It's the bus modules that set them, so they can be safely removed from the platform data without changing any board files. Create a new structure that the bus modules pass to wlcore. This structure contains the if_ops pointers and a pointer to the actual platform data. Signed-off-by: Luciano Coelho <coelho@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com>
2013-01-18Merge branch 'wl12xx-next' into for-linvilleLuciano Coelho9-63/+1096
Conflicts: drivers/net/wireless/ti/wl12xx/main.c drivers/net/wireless/ti/wlcore/wlcore.h
2012-12-11wlcore: Always pass DMA-able buffers to mmc functionsIdo Yariv2-6/+27
Some of the mmc drivers initiate DMA transfers with buffers passed from higher layers. This means that the driver shouldn't ever pass non DMA-able buffers, such as ones that are unaligned, allocated on the stack or static. Fix a couple of calls to the mmc layer in which buffers which weren't necessarily DMA-able were passed. [Use sizeof(*wl->buffer_32) instead of sizeof(u32) -- Luca] Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-11wlcore: support scan reports during periodic scanEyal Shapira1-3/+7
FW API changed and now PERIODIC_SCAN_REPORT_EVENT is sent in case results were found at the end of each sched scan cycle. Previous FW was missing that and broke sched scan. This API change is available from 18xx FW 8.5.0.0.27 [Arik - move changes to 18xx specific files, align FW structures to latest for scan command] Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-11wlcore/wl18xx: change priority calculations for linksArik Nemtsov1-0/+22
Update the 18xx FW status private part to include Tx related link priorities. Introduce new HW ops to determine link priority per chip family. For 18xx the changes are: - Suspended links are at most low priority and Tx for them is stopped beyond the suspend threshold. - Active links now get their thresholds directly from FW - There's a new "stop" threshold for active links, at which point a link stops receiving new packets. Update the min 18xx FW version required to make sure suspended links bitmap is advertised by the FW. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-11wlcore: increase scan dwell times if no activityEyal Shapira1-0/+2
There's a limit on scan dwell times of max 30ms in order to avoid degrading voip traffic which could be going on while scanning. However these dwell times increase the chance of missing out on nearby APs leading to partial scan results. Allow configuration of longer dwell times in case there no active interface (i.e. no STA associated or AP up). [Arik - count started vifs using an in-driver function] [Fixed some new checkpatch warnings regarding comments in the networking subsystem. -- Luca] Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-11wlcore: add ACX_PEER_CAP commandEliad Peller1-0/+10
ACX_PEER_CAP command is just ACX_PEER_HT_CAP, but allows configuring the peer's support rates as well. this is needed because we start the station role when the remote rates are not known yet. the two commands should be unified in future fw versions, but for now add a new set_peer_cap per-hw op, that will use ACX_PEER_CAP for 18xx, and ACX_PEER_HT_CAP for 12xx. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-07wlcore/wl18xx/wl12xx: remove __dev* attributesBill Pemberton1-3/+3
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Luciano Coelho <coelho@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-05wlcore: improved Tx scheduling algorithmArik Nemtsov1-0/+2
Prioritize EDCA by choosing the AC before anything else. Use the fast/slow link bitmap in FW to improve the scheduling algorithm for the multi-link scenario. Set packet thresholds to determine if a given link is high or low priority according to its speed. A slow link will be given high priority if the amount of packets queued for it in the FW is lower than the slow-threshold. Similarly, a fast link will be given high priority if the number of its packets queued in FW is smaller than the high-threshold. The improved algorithm: 1. Choose optimal AC according to FW utilization 2. Traversing the VIFs in a round-robin fashion, try to choose a high priority link. Links are traversed in a round-robin fashion inside a VIF. 3. If no high priority links are found, choose the first non-empty (low priority) link found in the round robin. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-04wlcore/wl12xx: make sure session id is always zero for APArik Nemtsov1-3/+6
The 12xx FW doesn't support non-zero session ids for AP-mode. Introduce an appropriate quirk to make sure the session id is always zero when needed. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-04wlcore/wl12xx/wl18xx: verify multi-role and single-role fw versionsLuciano Coelho2-19/+37
Previously we were only checking the single-role firmware version. Now add code to check for the firmware versions separately for each firmware type. Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-04wl12xx: ignore some of the firmware version fieldsLuciano Coelho1-4/+4
The firmware type and the project number fields in the firmware version number, cannot be checked as if they increase sequentially, because the former is the firmware type and the latter is an internal project number. There's no guarantee that these numbers will remain incremental, so use WLCORE_FW_VER_IGNORE. Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-04wlcore/wl12xx: remove deprecated FW version checkLuciano Coelho1-17/+0
We don't distinguish between STA and AP firmwares anymore, so the firmware version checking and quirks setting in wl12xx isn't needed anymore. Remove implementation of .identify_fw in wl12xx and deprecated definitions. Don't remove the op entirely from wlcore, because it may be needed for more fine-grained checking later. Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-04wlcore/wl12xx: move wl12xx chip ID defines to the lower driverLuciano Coelho2-13/+19
Move wl12xx-specific chip ID macros to the wl12xx driver and rename them to 127X and 128X for clarity since both the "1" (2.4GHz) and the "3" (2.4GHz and 5GHz) variants use the same chip ID. Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-04wlcore/wl18xx/wl12xx: add recovery settings to confYair Shapira1-0/+4
add support for recovery settings including bug_on_recovery and no_recovery options. These options can now be set using wl18xx-conf.bin file and wlconf tool. Signed-off-by: Yair Shapira <yair.shapira@ti.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-04wlcore/wl18xx/wl12xx: separate channel count between chipsArik Nemtsov1-0/+1
18xx chips are capable of staying on 2 channels at the same time. Introduce a chip-family specific parameter to set the number of channels in the interface-combinations published by the driver. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-28wlcore: configure dwell times according to scan typeEliad Peller2-5/+6
Allow configuring different dwell times to the different scan types (regular and scheduled). Add new configuration entry (dwell_time_dfs) to conf_scan_settings, in order to allow setting different values for normal scan and scheduled scan. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-27wlcore: update events enum/struct to new fw apiEliad Peller4-3/+246
The event mailbox in wl18xx has a different (non-compatible) structure. Create common functions in wlcore to handle the events, and call them from the chip-specific event mailbox parsers. This way, each driver (wl12xx/wl18xx) extracts the event mailbox by itself according to its own structure, and then calls the common wlcore functions to handle it. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-27wlcore: update channel_switch/stop_channel_switch commandsEliad Peller3-0/+58
Some fields were added to the channel_switch and stop_channel_switch commands. Unfortunately, the new 18xx channel_switch struct is not backward compatible with the 12xx channel switch struct. Add a new channel_switch op to wlcore, and update the driver accordingly. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-27wl18xx: increase MAX_CHANNELS_5GHZEliad Peller2-1/+4
Some regdomains have more than 23 valid 5ghz channels, so 18xx's MAX_CHANNELS_5GHZ was increased to 32. Since now we have different max 5ghz channels values for wl12xx and wl18xx, add a new wl->max_channels_5ghz field, and use it for scan channels configuration. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-27wlcore: split 18xx and 12xx scan mechanismEliad Peller4-1/+650
The scan APIs of 12xx and 18xx are totally different. Use some common functions as much as possible (e.g. for setting scan channels), but split scan.c into chip-specific scan.c files, each implementing its own scan mechanism. (in other words - move most of the current wlcore's scan.c into wl12xx, and implement a similar mechanism in 18xx, according to the new api) New wlcore ops are introduced in order to call the chip-specific scan functions. The template indices used for each scan (regular/scheduled) are also different between the chips, so set the correct indices used for each scan type after identifying the chip. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-27wlcore: workaround start_sta problem in wl12xx fwEliad Peller1-3/+6
for some reason, the wl12xx fw is not able to rx/tx on the first start_sta cmd. Workaround it by issuing a dummy start_sta + stop_sta before starting the sta for the final time. Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-09-27wlcore: Refactor probeIdo Yariv1-16/+36
Move most of the device-specific probe functionality into setup(), a new op. By doing this, wlcore_probe will be the first to request a firmware from userspace, making it easier to load the NVS file asynchronously. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: Fix unbalanced interrupts enablementIdo Yariv1-1/+8
The interrupt line is enabled by wl12xx_enable_interrupts and wl18xx_enable_interrupts, but it will not be disabled in all failure paths. Fix this. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore/wl18xx/wl12xx: allow up to 3 mac addressesArik Nemtsov2-0/+3
Allow 3 native mac addresses on 18xx. On 12xx allow 2 native mac addresses and set the LAA bit to create a third mac address. This enabled operation with a separate group interface. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore/wl18xx/wl12xx: aggregation buffer size setIgal Chernobelsky2-1/+3
Aggregation buffer size is set separately per 18xx/12xx chip family. For 18xx aggragation buffer is set to 13 pages to utilize all the available tx/rx descriptors for aggregation. [Arik - remove redundant parts from the patch] Signed-off-by: Igal Chernobelsky <igalc@ti.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wl18xx/wl12xx: defines for Tx/Rx descriptors numIgal Chernobelsky2-2/+5
Use defines for number of Tx/Rx descriptors. Signed-off-by: Igal Chernobelsky <igalc@ti.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wl12xx: remove duplicated include from main.cWei Yongjun1-1/+0
Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wl12xx: use module_platform_driverLuciano Coelho1-11/+1
Use a module_platform_driver declaration instead of replicating the init and exit functions in the driver. Based on the patch for wl18xx by Devendra Naga. Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-07-18wlcore/wl12xx: calibrator fem detect implementationYair Shapira2-4/+53
this completes the calibrator based fem detect logic in driver: driver starts (by calibrator) in plt_mode PLT_FEM_DETECT wlcore inits and starts plt on wl12xx wl12xx fetches fem number from firmware and stores it in wl->fem_manuf wl12xx immediatly returns (doesn't start radio, etc...) wlcore returns the fem_manuf to calibrator using WL1271_TM_ATTR_DATA plt_mode is stopped Signed-off-by: Yair Shapira <yair.shapira@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-07-10wl12xx/wl18xx: use a dynamic PS timeout of 1.5secArik Nemtsov1-1/+1
It seems some parties have bad user experience when smaller values are used. This should have little implications for power consumption, since traffic is bursty in nature. Signed-off-by: Arik Nemtsov <arik@wizery.com>
2012-07-10wl12xx/wlcore: increase FW filename versionLuciano Coelho1-6/+6
We have some API changes and new features in the new firmwares that are not compatible with older drivers. Increase the version of the FW filenames for wl12xx to 5. Additionally, remove the duplicate definitions from wlcore_i.h and remove the MODULE_FIRMWARE macro calls from the SDIO and SPI modules, since they're irrelevant there. Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-07-10wlcore: add probe request templates for sched and one-shot scansYoni Divinsky1-0/+3
The driver configures the firmware template for probe requests during the scan process. If the same template is used for one-shot and sched scans they will override each other when running scans simultaneously. This fix works only on firmwares later than X.3.9.2.112 for single role and X.3.9.2.23 for multi-role. [Some cleaning-up and renaming of the quirk to something smaller -- Luca.] Signed-off-by: Yoni Divinsky <yoni.divinsky@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-07-10wlcore/wl12xx/wl18xx: check min FW versionArik Nemtsov2-0/+23
Refuse to boot if the FW version is too old. The minimum version is set per chip, with the option of setting it per PG in the future. When boot fails because of an old FW, display a helpful message. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-06-22wlcore: Force checking of io functions' return valuesIdo Yariv1-2/+4
All io functions' return values should be propagated and handled. Add a __must_check annotation to verify that the return values are checked and to avoid future mistakes. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-06-22wlcore: Propagate errors from wl1271_raw_write32Ido Yariv1-44/+116
Propagate errors from wl1271_raw_write32 and request for recovery when appropriate. Also rename prefixes of wlcore functions which their prototypes had to be changed. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-06-22wlcore: Propagate errors from wl1271_raw_read32Ido Yariv1-37/+115
Propagate errors from wl1271_raw_read32. Since the read functions had no way of returning errors in-band, change their prototypes. Also rename prefixes of wlcore functions which their prototypes had to be changed. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-06-22wlcore: Propagate errors from wl1271_writeIdo Yariv1-5/+18
Propagate errors from wl1271_write and request for recovery when appropriate. Also rename prefixes of wlcore functions which their prototypes had to be changed. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-06-22wlcore: Propagate errors from wl1271_readIdo Yariv1-3/+3
Propagate errors from wl1271_read and request for recovery when appropriate. Also rename prefixes of wlcore functions which their prototypes had to be changed. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-06-21wl18xx: sane defaults for HT capabilitiesArik Nemtsov1-4/+2
Introduce a default set of HT capabilities that are set according to the number of antennas on the board. Move the HT setting code down to allow the number of antennas to be set (and optionally overridden) before it. Remove the "mimo" HT option, since the default mode now enables MIMO is possible. Use this opportunity to add a helper function for setting HT capabilities and reduce the volume of the code a bit. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-28 01:19:38 +0300