summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
AgeCommit message (Collapse)AuthorFilesLines
2015-10-14rtlwifi: rtl818x: Move drivers into new realtek directoryLarry Finger1-2482/+0
Now that a new mac80211-based driver for Realtek devices has been submitted, it is time to reorganize the directories. Rather than having directories rtlwifi and rtl818x be in drivers/net/wireless/, they will now be in drivers/net/wireless/realtek/. This change simplifies the directory structure, but does not result in any configuration changes that are visable to the user. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26rtlwifi: Remove the clear interrupt routine from all driversVincent Fann1-13/+0
Several of these drivers have there TX randomly blocked for 3~5 seconds while measuring tx throughput (iperf). The root couse happens in rtl_pci_flush(). The function uses a while-loop to wait for TX queue length to decrease to 0. The TX queue length counts the number of packets that are queued in the driver. The driver relys on the TX OK interrupt to return skb and reduce TX queue length. The interrupt subroutine disables interupts, reads the interrupt registers, and then clears the registers in the beginning of _rtl_pci_interrupt(). After all interupts process are finished, the driver invokes enable_interrupt() to enable interupts. This behavior is normal for an interrupt subroutine. But enable_interrupt() invokes clear_interrupt() again. This unexpected interrupt clearing may cleari me fresh TX OK interrupts. These missing interrupts cause TX queue length to never reduce to 0i, which causes rtl_pci_flush() to be stuck in unterminated while-loop. This patch removes clear_interrupt() in enable_interrupt() to avoid this behavior. Signed-off-by: Vincent Fann <vincent_fann@realtek.com> Signed-off-by: Shao Fu <shaofu@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [3.18+] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30rtlwifi: Change REG_CR+2 to MSRTaehee Yoo1-1/+1
I changed REG_CR+2 and (MSR) to MSR because MSR is defined as (REG_CR + 2). Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26rtlwifi: Clear ACM_CTRL AC3_VO bit correctlyJes Sorensen1-1/+1
All hw driver components in the rtlwifi driver, except for the rtl8192de component has this bug. They would clear BE bit in the ACM_CTRL register instead of the VO bit when processing the VO queue. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-09-30rtlwifi: rtl8723be: Update driver to match Realtek release of 06/28/14Larry Finger1-1/+1
This patch updates the driver to match the latest Realtek release, and it is an important step in getting the internal code source at Realtek to match the code in the kernel. The primary reason for this is to make it easier for Realtek to maintain the kernel source without requiring an intermediate like me. In this process of merging the two source repositories, there are a lot of changes in both, and this commit is rather large. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30rtlwifi: rtl8723ae: Update driver to match 06/28/14 Realtek versionLarry Finger1-701/+811
Not only does this patch update the driver to match the latest Realtek release, it is an important step in getting the internal code source at Realtek to match the code in the kernel. The primary reason for this is to make it easier for Realtek to maintain the kernel source without requiring an intermediate like me. In this process of merging the two source repositories, there are a lot of changes in both, and this commit is rather large. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-27rtlwifi: Fix problems with building an allyesconfigLarry Finger1-1/+1
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-27rtlwifi: Update power-save routines for 062814 driverLarry Finger1-0/+1
Realtek released a new version of the drivers on 06/28/2014. This patch implements the new power-save code. These changes also force corresponding changes in the drivers. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-21rtlwifi: rtl8723ae: remove unnecessary break after returnFabian Frederick1-1/+0
Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-25rtlwifi/rtl8723ae: Replace magic number by macroRickard Strandqvist1-1/+1
For consistency with other drivers, replace a magic number by a macro. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Reviewed-by: Peter Wu <peter@lekensteyn.nl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-20rtlwifi: remove unused allow_all_destaddr functionsPeter Wu1-21/+0
Unused as configure_filter takes care of setting/clearing RCR_AAP. In commit "rtlwifi: rtl8723be: rtl8723com: Remove unused allow_all_destaddr functions", Larry Finger removed allow_all_destaddr from the struct. This commit removes the related function too. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-27rtlwifi: Remove casts of pointer to same typeJoe Perches1-33/+27
Casting a pointer to a pointer of the same type is pointless, so remove these unnecessary casts. Around these changes: o Remove unnecessary parentheses o Use consistent dereference style (change ptr[0] to *ptr) o Argument alignment Done via coccinelle script: (and some typing) $ cat typecast_2.cocci @@ type T; T *foo; @@ - (T *)foo + foo Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-27rtlwifi: Remove addressof casts to same typeJoe Perches1-4/+3
Using addressof then casting to the original type is pointless, so remove these unnecessary casts. Done via coccinelle script: $ cat typecast.cocci @@ type T; T foo; @@ - (T *)&foo + &foo Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-06rtlwifi: rtl8723ae: Fix too long disable of IRQsLarry Finger1-3/+15
In commit f78bccd79ba3cd9d9664981b501d57bdb81ab8a4 entitled "rtlwifi: rtl8192ce: Fix too long disable of IRQs", Olivier Langlois <olivier@trillion01.com> fixed a problem caused by an extra long disabling of interrupts. This patch makes the same fix for rtl8723ae. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-06rtlwifi: Move common routines to coreLarry Finger1-1/+0
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-04rtlwifi: rtl8723ae: rtl8723-common: Copy common dynamic power management codeLarry Finger1-2/+3
The drivers for RTL8723AE and RTL8723BE have some code in common. This commit copies the common power management routines into the shared code. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-04rtlwifi: rtl8723ae: rtl8723-common: Copy common firmware codeLarry Finger1-1/+2
The drivers for RTL8723AE and RTL8723BE have some code in common. This commit copies the common firmware routines into the shared code. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-04rtlwifi: Prepare existing drivers for new driverLarry Finger1-14/+14
A driver for the RTL8723BE will soon be added. This patch adds the necessary parts to the common headers, and modifies the existing drivers for those changes. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-25rtlwifi: avoid accessing RCR directlyPeter Wu1-2/+3
The rtl*_set_check_bssid functions are mostly the same, but access the RCR register in different ways. Use the get_hw_reg abstraction layer (which reads rtlpci->receive_config for PCI devices and mac->rx_conf for USB). There is no functional change for cases where receive_config was accessed directly. For rtl8192ce, there is still no change because nothing modifies REG_RCR or receive_config. For rtl8192cu, it now also applies changes to rx_conf from configure_filter, but that can be considered a bug which is fixed later. Signed-off-by: Peter Wu <lekensteyn@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-02rtlwifi: rtl8192c: rtl8192ce: rtl8192cu: rtl8192de: rtl8723ae: Add changes ↵Larry Finger1-23/+11
required by adding rtl81988ee This patch combines the remaining changes in the rtlwifi family to handle the addition of rtl8188ee. A number of these changes eliminate some CamelCase variable names, and other shorten common variable names so that long lines in the new driver could be shortened. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: jcheung@suse.com Cc: machen@suse.com Cc: mmarek@suse.cz Cc: zhiyuan_yang@realsil.com.cn Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-02rtlwifi: rtl8723ae: Update to vendor driver of 2013.02.07Larry Finger1-0/+36
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: jcheung@suse.com Cc: machen@suse.com Cc: mmarek@suse.cz Cc: zhiyuan_yang@realsil.com.cn Cc: page_he@realsil.com.cn Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-15mac80211: stop toggling IEEE80211_HT_CAP_SUP_WIDTH_20_40Johannes Berg1-2/+1
For VHT, many more bandwidth changes are possible. As a first step, stop toggling the IEEE80211_HT_CAP_SUP_WIDTH_20_40 flag in the HT capabilities and instead introduce a bandwidth field indicating the currently usable bandwidth to transmit to the station. Of course, make all drivers use it. To achieve this, make ieee80211_ht_cap_ie_to_sta_ht_cap() get the station as an argument, rather than the new capabilities, so it can set up the new bandwidth field. If the station is a VHT station and VHT bandwidth is in use, also set the bandwidth accordingly. Doing this allows us to get rid of the supports_40mhz flag as the HT capabilities now reflect the true capability instead of the current setting. While at it, also fix ieee80211_ht_cap_ie_to_sta_ht_cap() to not ignore HT cap overrides when MCS TX isn't supported (not that it really happens...) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-01rtlwifi: rtl8723ae: Fix W=1 compile warningsLarry Finger1-6/+2
Whe this driver is built with "make W=1", the following warnings are output: drivers/net/wireless/rtlwifi/rtl8723ae/fw.c:515:5: warning: variable ‘own’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/hal_btc.c:1436:5: warning: variable ‘bt_retry_cnt’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/hw.c:706:6: warning: variable ‘reg_ratr’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/hw.c:2033:41: warning: variable ‘cur_rfstate’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:620:23: warning: variable ‘radiob_arraylen’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:619:7: warning: variable ‘radiob_array_table’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:617:7: warning: variable ‘rtstatus’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:1534:6: warning: variable ‘bbvalue’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:1716:6: warning: variable ‘reg_ecc’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:1715:61: warning: variable ‘reg_ec4’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:1715:34: warning: variable ‘reg_eac’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/trx.c:247:6: warning: variable ‘psaddr’ set but not used [-Wunused-but-set-variable] Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-14rtlwifi: rtl8723ae: Add new driverLarry Finger1-0/+2380
This patch is the addition of files for a new driver to handle the Realtek RTL8723AE wireless device. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: <chaoming_li@realsil.com.cn> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-11 05:59:20 +0300