summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/rt2x00
AgeCommit message (Collapse)AuthorFilesLines
2015-03-30rt2800usb: check Autorun mode on FW load only onceStanislaw Gruszka1-0/+1
Seems H/W report correctly firmware Autorun value only at initialization stage. When we close interface and open it again, Autorun value is 0 and we try to load firmware what kills the device. To fix clear REQUIRE_FIRMWARE firmware flag, to do not load firmware again, once we discover Autorun mode. Reported-and-tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-20rt2x00: add new rt2800usb device DWA 130Scott Branden1-0/+1
Add the USB Id to link the D-Link DWA 130 USB Wifi adapter to the rt2830 driver. Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Pieter Truter <ptruter@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16rt2x00usb: drop rt2x00usb_disable_radio() from rt2800usb_disable_radio()Sebastian Andrzej Siewior1-1/+0
I have here FRITZ!WLAN USB Stick N v2 / idVendor=057c, idProduct=8501 and every single of this requests ends up with: |ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor Request 0x0c failed for offset 0x0000 with error -32 I was browsing the the vedor code and I haven't seen such request so I remove it with this patch. If I wasn't look enough or if this error is expected then please excuse :) Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16rt2x00usb: check USB's request error code in rt2800usb_autorun_detect()Sebastian Andrzej Siewior1-3/+7
rt2800usb_autorun_detect() blindly assumes assumes that it worked while it could have failed. Check the error code here. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16rt2x00usb: initialize the read value in case of failureSebastian Andrzej Siewior1-2/+2
My understanding ist that rt2x00usb_register_read() is void and so the reader is unaware of read errors and assumes that whatever was on the stack as it was about to read. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-19Merge branch 'kconfig' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kconfig updates from Michal Marek: "Yann E Morin was supposed to take over kconfig maintainership, but this hasn't happened. So I'm sending a few kconfig patches that I collected: - Fix for missing va_end in kconfig - merge_config.sh displays used if given too few arguments - s/boolean/bool/ in Kconfig files for consistency, with the plan to only support bool in the future" * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kconfig: use va_end to match corresponding va_start merge_config.sh: Display usage if given too few arguments kconfig: use bool instead of boolean for type definition attributes
2015-01-22Merge commit 'c1e140bf79d817d4a7aa9932eb98b0359c87af33' from mac80211-nextKalle Valo1-6/+6
Patch "ath9k: Fix no-ack frame status" needs these mac80211 patches: commit 5cf16616e152dd5c274a65954c77f64892d025a8 Author: Sujith Manoharan <c_manoha@qca.qualcomm.com> Date: Wed Dec 10 21:26:11 2014 +0530 mac80211: Fix accounting of multicast frames commit 6b127c71fbdd3daacfd8b9f80b8e6ebfb70a889e Author: Sujith Manoharan <c_manoha@qca.qualcomm.com> Date: Wed Dec 10 21:26:10 2014 +0530 mac80211: Move IEEE80211_TX_CTL_PS_RESPONSE Conflicts: drivers/net/wireless/ath/wil6210/cfg80211.c drivers/staging/rtl8723au/os_dep/ioctl_cfg80211.c
2015-01-08cfg80211: remove "channel" from survey namesJohannes Berg1-6/+6
All of the survey data is (currently) per channel anyway, so having the word "channel" in the name does nothing. In the next patch I'll introduce global data to the survey, where the word "channel" is actually confusing. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-07kconfig: use bool instead of boolean for type definition attributesChristoph Jaeger1-3/+3
Support for keyword 'boolean' will be dropped later on. No functional change. Reference: http://lkml.kernel.org/r/cover.1418003065.git.cj@linux.com Signed-off-by: Christoph Jaeger <cj@linux.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-01-07rt2x00: use helper to check capability/requirementFred Chou6-26/+26
Use rt2x00_has_cap_flag macro to check rt2x00dev->cap_flags. Signed-off-by: Fred Chou <fred.chou.nd@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-12-15Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-01Revert "rt2x00: Endless loop on hub port power down"Stanislaw Gruszka1-6/+0
This reverts commit 2ad69ac5976191e9bb7dc4044204a504653ad1bb. It causes wireless device disappear when we get -EPROTO error form USB request. I encounter such situation occasionally when resume form suspend with RT3070 adapter: [ 289.619985] ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0404 with error -71 [ 289.639368] ieee80211 phy0: rt2800_wait_bbp_ready: Error - BBP register access failed, aborting [ 289.639374] ieee80211 phy0: rt2800usb_set_device_state: Error - Device failed to enter state 4 (-5) Without the patch, except printing error, device works just fine after resume. Currently after timeouts and REGISTER_BUSY_COUNT tuning, we should not have any "endless loop", though we can wait quite long when driver is trying to communicate with the device through non functioning USB connection. Generally the problem that commit 2ad69ac597619 solves is kinda artificial. Cc: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01rt2x00: change REGISTER_TIMEOUTStanislaw Gruszka1-1/+1
Waiting 500ms for register access is too long, decrease this value to 100ms. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01rt2x00: change REGISTER_BUSY_COUNT for USBStanislaw Gruszka4-7/+10
Because of delays on USB we do not have to iterate so many times on USB hardware when waiting for H/W register become valid. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01rt2x00: use timeout in rt2x00usb_vendor_requestStanislaw Gruszka1-10/+6
Use provided timeout value in rt2x00usb_vendor_request() instead of iterating REGISTER_BUSY_COUNT times. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01rt2800: calculate tx power temperature compensation on selected chipsStanislaw Gruszka1-19/+26
Currently implemented temperature compensation is only valid on some of supported chips. Other chips do not need temperature compensation or need different way to do this (not yet implemented in the rt2800 driver). Trying to do run rt2800_get_gain_calibration_delta() when this is not appropriate on particular chip gives bogus result of TX power and can make connection unstable. This is follow up to commit 8c8d2017ba25c510ddf093419048460db1109bc4 "rt2800: fix RT5390 & RT3290 TX power settings regression". On that commit we avoid setting BBP_R1 register, but the real problem is wrong temperature compensation calculation. Reported-and-tested-by: Ronald Wahl <ronald.wahl@raritan.com> Debugged-by: Ronald Wahl <ronald.wahl@raritan.com> Cc: Mike Romberg <mike-romberg@comcast.net> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-21Merge tag 'mac80211-next-for-john-2014-11-20' of ↵John W. Linville2-4/+10
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg <johannes@sipsolutions.net> says: "It has been a while since my last pull request, so we accumulated another relatively large set of changes: * TDLS off-channel support set from Arik/Liad, with some support patches I did * custom regulatory fixes from Arik * minstrel VHT fix (and a small optimisation) from Felix * add back radiotap vendor namespace support (myself) * random MAC address scanning for cfg80211/mac80211/hwsim (myself) * CSA improvements (Luca) * WoWLAN Net Detect (wake on network found) support (Luca) * and lots of other smaller changes from many people" Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-19Merge commit '4e6ce4dc7ce71d0886908d55129d5d6482a27ff9' of ↵John W. Linville2-38/+13
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-11-19mac80211: allow drivers to support NL80211_SCAN_FLAG_RANDOM_ADDRJohannes Berg2-4/+10
Allow drivers to support NL80211_SCAN_FLAG_RANDOM_ADDR with software based scanning and generate a random MAC address for them for every scan request with the flag. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-12rt2x00: do not align payload on modern H/WStanislaw Gruszka1-38/+12
RT2800 and newer hardware require padding between header and payload if header length is not multiple of 4. For historical reasons we also align payload to to 4 bytes boundary, but such alignment is not needed on modern H/W. Patch fixes skb_under_panic problems reported from time to time: https://bugzilla.kernel.org/show_bug.cgi?id=84911 https://bugzilla.kernel.org/show_bug.cgi?id=72471 http://marc.info/?l=linux-wireless&m=139108549530402&w=2 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1087591 Panic happened because we eat 4 bytes of skb headroom on each (re)transmission when sending frame without the payload and the header length not being multiple of 4 (i.e. QoS header has 26 bytes). On such case because paylad_aling=2 is bigger than header_align=0 we increase header_align by 4 bytes. To prevent that we could change the check to: if (payload_length && payload_align > header_align) header_align += 4; but not aligning payload at all is more effective and alignment is not really needed by H/W (that has been tested on OpenWrt project for few years now). Reported-and-tested-by: Antti S. Lankila <alankila@bel.fi> Debugged-by: Antti S. Lankila <alankila@bel.fi> Reported-by: Henrik Asp <solenskiner@gmail.com> Originally-From: Helmut Schaa <helmut.schaa@googlemail.com> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-04Merge branch 'platform/remove_owner' of ↵Greg Kroah-Hartman1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next Remove all .owner fields from platform drivers
2014-10-30wireless: rt2x00: add new rt2800usb deviceCyril Brulebois1-0/+1
0x1b75 0xa200 AirLive WN-200USB wireless 11b/g/n dongle References: https://bugs.debian.org/766802 Reported-by: Martin Mokrejs <mmokrejs@fold.natur.cuni.cz> Cc: stable@vger.kernel.org Signed-off-by: Cyril Brulebois <kibi@debian.org> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-27rt2x00: tune multi-registers I/O timeoutStanislaw Gruszka3-36/+17
We provide timeout value to rt2x00usb_vendor_request_buff() based on number of registers to process. That value is passed down to rt2x00usb_vendor_req_buff_lock() and ends in usb_control_msg(). But we do not read/write all registers in rt2x00usb_vendor_req_buff_lock() at once. We read/write them in chunks of 64 bytes in the loop, hence passed timeout value to low level is too big. Patch removes timeout argument from rt2x00usb_vendor_request_buff() and use short REGISTER_TIMEOUT in rt2x00usb_vendor_req_buff_lock(). That timeout value should be fine for 64 bytes and smaller requests. For EEPROM read we introduced new timeout value equal to 2 seconds. Patch fixes process uninterruptible sleep stalls for long period, when USB bus has problem to satisfy a request and we wait very long time on usb_start_wait_urb(). Reported-and-tested-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-20net: wireless: rt2x00: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-09-27rt2800: correct BBP1_TX_POWER_CTRL maskStanislaw Gruszka1-1/+1
Two bits control TX power on BBP_R1 register. Correct the mask, otherwise we clear additional bit on BBP_R1 register, what can have unknown, possible negative effect. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28rt2x00: support Ralink 5362.Canek Peláez Valdés2-1/+9
Signed-off-by: Canek Peláez Valdés <canek@ciencias.unam.mx> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine4-4/+4
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-07-16wireless: rt2x00: add new rt2800usb devicesXose Vazquez Perez1-0/+4
0x0b05 0x17e8 RT5372 USB 2.0 bgn 2x2 ASUS USB-N14 0x0411 0x0253 RT5572 USB 2.0 abgn 2x2 BUFFALO WLP-U2-300D 0x0df6 0x0078 RT???? Sitecom N300 Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-11Merge branch 'master' of ↵John W. Linville6-7/+83
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-07-07rt2800usb: Don't perform DMA from stackAndrea Merello1-6/+22
Function rt2800usb_autorun_detect() passes the address of a variable allocated onto the stack to be used for DMA by the USB layer. This has been caught by my debugging-enabled kernel. This patch change things in order to allocate that variable via kmalloc, and it adjusts things to handle the kmalloc failure case, propagating the error. [ 7363.238852] ------------[ cut here ]------------ [ 7363.243529] WARNING: CPU: 1 PID: 5235 at lib/dma-debug.c:1153 check_for_stack+0xa4/0xf0() [ 7363.251759] ehci-pci 0000:00:04.1: DMA-API: device driver maps memory fromstack [addr=ffff88006b81bad4] [ 7363.261210] Modules linked in: rt2800usb(O+) rt2800lib(O) rt2x00usb(O) rt2x00lib(O) rtl818x_pci(O) rtl8187 led_class eeprom_93cx6 mac80211 cfg80211 [last unloaded: rt2x00lib] [ 7363.277143] CPU: 1 PID: 5235 Comm: systemd-udevd Tainted: G O 3.16.0-rc3-wl+ #31 [ 7363.285546] Hardware name: System manufacturer System Product Name/M3N78 PRO, BIOS ASUS M3N78 PRO ACPI BIOS Revision 1402 12/04/2009 [ 7363.297511] 0000000000000009 ffff88006b81b710 ffffffff8175dcad ffff88006b81b758 [ 7363.305062] ffff88006b81b748 ffffffff8106d372 ffff88006cf10098 ffff88006cead6a0 [ 7363.312622] ffff88006b81bad4 ffffffff81c1e7c0 ffff88006cf10098 ffff88006b81b7a8 [ 7363.320161] Call Trace: [ 7363.322661] [<ffffffff8175dcad>] dump_stack+0x4d/0x6f [ 7363.327847] [<ffffffff8106d372>] warn_slowpath_common+0x82/0xb0 [ 7363.333893] [<ffffffff8106d3e7>] warn_slowpath_fmt+0x47/0x50 [ 7363.339686] [<ffffffff813a93b4>] check_for_stack+0xa4/0xf0 [ 7363.345298] [<ffffffff813a995c>] debug_dma_map_page+0x10c/0x150 [ 7363.351367] [<ffffffff81521bd9>] usb_hcd_map_urb_for_dma+0x229/0x720 [ 7363.357890] [<ffffffff8152256d>] usb_hcd_submit_urb+0x2fd/0x930 [ 7363.363929] [<ffffffff810eac31>] ? irq_work_queue+0x71/0xd0 [ 7363.369617] [<ffffffff810ab5a7>] ? wake_up_klogd+0x37/0x50 [ 7363.375219] [<ffffffff810ab7a5>] ? console_unlock+0x1e5/0x420 [ 7363.381081] [<ffffffff810abc25>] ? vprintk_emit+0x245/0x530 [ 7363.386773] [<ffffffff81523d3c>] usb_submit_urb+0x30c/0x580 [ 7363.392462] [<ffffffff81524295>] usb_start_wait_urb+0x65/0xf0 [ 7363.398325] [<ffffffff815243ed>] usb_control_msg+0xcd/0x110 [ 7363.404014] [<ffffffffa005514d>] rt2x00usb_vendor_request+0xbd/0x170 [rt2x00usb] [ 7363.411544] [<ffffffffa0074292>] rt2800usb_autorun_detect+0x32/0x50 [rt2800usb] [ 7363.418986] [<ffffffffa0074aa1>] rt2800usb_read_eeprom+0x11/0x70 [rt2800usb] [ 7363.426168] [<ffffffffa0063ffd>] rt2800_probe_hw+0x11d/0xf90 [rt2800lib] [ 7363.432989] [<ffffffffa0074b7d>] rt2800usb_probe_hw+0xd/0x50 [rt2800usb] [ 7363.439808] [<ffffffffa00453d8>] rt2x00lib_probe_dev+0x238/0x7c0 [rt2x00lib] [ 7363.446992] [<ffffffffa00bfa48>] ? ieee80211_led_names+0xb8/0x100 [mac80211] [ 7363.454156] [<ffffffffa0056116>] rt2x00usb_probe+0x156/0x1f0 [rt2x00usb] [ 7363.460971] [<ffffffffa0074250>] rt2800usb_probe+0x10/0x20 [rt2800usb] [ 7363.467616] [<ffffffff8152799e>] usb_probe_interface+0xce/0x1c0 [ 7363.473651] [<ffffffff81480c20>] really_probe+0x70/0x240 [ 7363.479079] [<ffffffff81480f01>] __driver_attach+0xa1/0xb0 [ 7363.484682] [<ffffffff81480e60>] ? __device_attach+0x70/0x70 [ 7363.490461] [<ffffffff8147eef3>] bus_for_each_dev+0x63/0xa0 [ 7363.496146] [<ffffffff814807c9>] driver_attach+0x19/0x20 [ 7363.501570] [<ffffffff81480468>] bus_add_driver+0x178/0x220 [ 7363.507270] [<ffffffff8148151b>] driver_register+0x5b/0xe0 [ 7363.512874] [<ffffffff815271b0>] usb_register_driver+0xa0/0x170 [ 7363.518905] [<ffffffffa007a000>] ? 0xffffffffa0079fff [ 7363.524074] [<ffffffffa007a01e>] rt2800usb_driver_init+0x1e/0x20 [rt2800usb] [ 7363.531247] [<ffffffff810002d4>] do_one_initcall+0x84/0x1b0 [ 7363.536932] [<ffffffff8113aa60>] ? kfree+0xd0/0x110 [ 7363.541931] [<ffffffff8112730a>] ? __vunmap+0xaa/0xf0 [ 7363.547538] [<ffffffff810ca07e>] load_module+0x1aee/0x2040 [ 7363.553141] [<ffffffff810c6f10>] ? store_uevent+0x50/0x50 [ 7363.558676] [<ffffffff810ca66e>] SyS_init_module+0x9e/0xc0 [ 7363.564285] [<ffffffff81764012>] system_call_fastpath+0x16/0x1b [ 7363.570338] ---[ end trace 01ef5f822bea9882 ]--- Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19drivers/net/wireless/rt2x00/rt2x00dev.c: remove null test before kfreeFabian Frederick1-2/+1
Fix checkpatch warning: WARNING: kfree(NULL) is safe this check is probably not required Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19rt2x00: Use dma_zalloc_coherentJoe Perches1-5/+3
Use the zeroing function instead of dma_alloc_coherent & memset(,0,) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19rt2x00: do not initialize BCN_OFFSET registersStanislaw Gruszka1-22/+0
We setup BCN_OFFSET{0,1} registers dynamically, don't have to initialize them. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19rt2x00: change order when stop beaconingStanislaw Gruszka1-6/+6
When no beaconing is needed, first stop beacon queue (disable beaconing globally) to avoid possible sending of not prepared beacon on short period after clearing beacon and before stop of BCN queue. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19rt2x00: change default MAC_BSSID_DW1_BSS_BCN_NUMStanislaw Gruszka1-1/+1
We setup MAC_BSSID_DW1_BSS_BCN_NUM dynamically when numbers of active beacons increase. Change default to 0 to tell hardware that we want to send only one beacon as default. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19rt2x00: change beaconing setup on RT2800Stanislaw Gruszka2-0/+46
As reported by Matthias, on 5572 chip, even if we clear up TXWI of corresponding beacon, hardware still try to send it or do other action that increase power consumption peak up to 1A. To avoid the issue, setup beaconing dynamically by configuring offsets of currently active beacons and MAC_BSSID_DW1_BSS_BCN_NUM variable, which limit number of beacons that hardware will try to send. Reported-by: Matthias Fend <Matthias.Fend@wolfvision.net> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19rt2x00: change beaconing lockingStanislaw Gruszka3-25/+9
This patch is needed for further changes to keep global variables consistent when changing beaconing on diffrent vif's. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19net: wireless: rt2x00: rt2x00mac.c: Cleaning up uninitialized variablesRickard Strandqvist1-0/+2
There is a risk that the variable will be used without being initialized. This was largely found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-17rt2x00: fix rfkill regression on rt2500pciStanislaw Gruszka3-4/+28
As reported by Niels, starting rfkill polling during device probe (commit e2bc7c5, generally sane change) broke rfkill on rt2500pci device. I considered that bug as some initalization issue, which should be fixed on rt2500pci specific code. But after several attempts (see bug report for details) we fail to find working solution. Hence I decided to revert to old behaviour on rt2500pci to fix regression. Additionally patch also unregister rfkill on device remove instead of ifconfig down, what was another issue introduced by bad commit. Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=73821 Fixes: e2bc7c5f3cb8 ("rt2x00: Fix rfkill_polling register function.") Cc: stable@vger.kernel.org Bisected-by: Niels <nille0386@googlemail.com> Reported-and-tested-by: Niels <nille0386@googlemail.com> Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-17rt2800usb:fix hang during firmware loadMichael Braun1-2/+7
The device 057c:8501 (AVM Fritz! WLAN v2 rev. B) boots into a state that does not actually require loading a firmware file. The vendors driver finds out about this by checking a firmware state register, so this patch adds this here. Finally, with this patch applied, my wifi dongle actually becomes useful (scan + connect to wpa network works). Signed-off-by: Michael Braun <michael-dev@fami-braun.de> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-17rt2800usb:fix efuse detectionMichael Braun2-1/+30
The device 057c:8501 (AVM Fritz! WLAN v2 rev. B) currently does not load. One thing observed is that the vendors driver detects EFUSE mode for this device, but rt2800usb does not. This is due to rt2800usb lacking a check for the firmware mode present in the vendors driver, that this patch adopts for rt2800usb. With this patch applied, the 'RF chipset' detection does no longer fail. Signed-off-by: Michael Braun <michael-dev@fami-braun.de> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-16rt2x00: disable TKIP on USBStanislaw Gruszka1-0/+2
On USB we can not get atomically TKIP key. We have to disable support for TKIP acceleration on USB hardware to avoid bug as showed bellow. [ 860.827243] BUG: scheduling while atomic: hostapd/3397/0x00000002 <snip> [ 860.827280] Call Trace: [ 860.827282] [<ffffffff81682ea6>] dump_stack+0x4d/0x66 [ 860.827284] [<ffffffff8167eb9b>] __schedule_bug+0x47/0x55 [ 860.827285] [<ffffffff81685bb3>] __schedule+0x733/0x7b0 [ 860.827287] [<ffffffff81685c59>] schedule+0x29/0x70 [ 860.827289] [<ffffffff81684f8a>] schedule_timeout+0x15a/0x2b0 [ 860.827291] [<ffffffff8105ac50>] ? ftrace_raw_event_tick_stop+0xc0/0xc0 [ 860.827294] [<ffffffff810c13c2>] ? __module_text_address+0x12/0x70 [ 860.827296] [<ffffffff81686823>] wait_for_completion_timeout+0xb3/0x140 [ 860.827298] [<ffffffff81080fc0>] ? wake_up_state+0x20/0x20 [ 860.827301] [<ffffffff814d5b3d>] usb_start_wait_urb+0x7d/0x150 [ 860.827303] [<ffffffff814d5cd5>] usb_control_msg+0xc5/0x110 [ 860.827305] [<ffffffffa02fb0c6>] rt2x00usb_vendor_request+0xc6/0x160 [rt2x00usb] [ 860.827307] [<ffffffffa02fb215>] rt2x00usb_vendor_req_buff_lock+0x75/0x150 [rt2x00usb] [ 860.827309] [<ffffffffa02fb393>] rt2x00usb_vendor_request_buff+0xa3/0xe0 [rt2x00usb] [ 860.827311] [<ffffffffa023d1a3>] rt2x00usb_register_multiread+0x33/0x40 [rt2800usb] [ 860.827314] [<ffffffffa05805f9>] rt2800_get_tkip_seq+0x39/0x50 [rt2800lib] [ 860.827321] [<ffffffffa0480f88>] ieee80211_get_key+0x218/0x2a0 [mac80211] [ 860.827322] [<ffffffff815cc68c>] ? __nlmsg_put+0x6c/0x80 [ 860.827329] [<ffffffffa051b02e>] nl80211_get_key+0x22e/0x360 [cfg80211] Cc: stable@vger.kernel.org Reported-and-tested-by: Peter Wu <lekensteyn@gmail.com> Reported-and-tested-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22rt2x00: Endless loop on hub port power downRichard Genoud1-0/+6
I've met an endless (or at least very long) loop if I power down the usb port on witch a usb wifi key is plugged. (Ok, it's not very smart to power down a usb port when a usb key is in used... but still, I think that should not lead to an endless loop). I have a lot of: ieee80211 phy1: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0438 with error -71 (-71==-EPROTO) How to reproduce: - plug an usb wifi key - ip link set wlan0 up - hub-ctrl -b usb_bus -d usb_device -P usb_port -p 0 hub-ctrl source: https://github.com/codazoda/hub-ctrl.c/blob/master/hub-ctrl.c The following patch prevents the endless loop, but I'm really not sure that The Right Way To Do It (R) Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13Merge branch 'master' of ↵John W. Linville1-10/+12
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-04-30Merge branch 'for-john' of ↵John W. Linville2-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: net/mac80211/chan.c
2014-04-22rt2x00: restore original beaconing stateStanislaw Gruszka3-18/+17
After changing local per interface beacon setting restore original global beaconing state. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22rt2x00: fix beaconing on USBStanislaw Gruszka1-10/+12
When disable beaconing we clear register with beacon and newer set it back, what make we stop send beacons infinitely. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-09mac80211: add vif to flush callEmmanuel Grumbach2-2/+4
This will allow the low level driver to make decision based on the vif such as queues etc... Since the vif might be NULL, we can't add it to the tracing functions. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [fix staging rtl8821ae driver] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+3
Conflicts: Documentation/devicetree/bindings/net/micrel-ks8851.txt net/core/netpoll.c The net/core/netpoll.c conflict is a bug fix in 'net' happening to code which is completely removed in 'net-next'. In micrel-ks8851.txt we simply have overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-13Revert "rt2x00: rt2800lib: Update BBP register initialization for RT53xx"Stanislaw Gruszka1-3/+3
This reverts commit eac40d9631a7db43570df859fa8a9922e9623607. It cause random connection drops on RT5390 PCI adapters. On Mediatek there is different driver version available for RT53xx chip based on bus type (2.5.0.3 for PCI and 2.6.1.3 for USB). Hence possibly we should set registers differently based on bus type. But is also possible that new driver (i.e. 2.6.1.3) was not verified on RT53xx USB. Until we figure out how to initialize registers properly for RT53xx just revert commit eac40d9631a7db43570df859fa8a9922e9623607 since it cause regression. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-18 19:42:37 +0300