summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/rt2x00
AgeCommit message (Collapse)AuthorFilesLines
2013-04-03rt2x00: rt2x00pci: fix build error on Ralink RT3x5x SoCsGabor Juhos10-264/+347
The rt2800pci driver supports the built-in wireless MAC of the Ralink RT3x5x SoCs. However building the driver for these SoCs leads to the following error: LD init/built-in.o drivers/built-in.o: In function `rt2800pci_rxdone_tasklet': <...>/drivers/net/wireless/rt2x00/rt2800pci.c:1012: undefined reference to `rt2x00pci_rxdone' drivers/built-in.o:(.rodata+0x4780): undefined reference to `rt2x00pci_initialize' drivers/built-in.o:(.rodata+0x4784): undefined reference to `rt2x00pci_uninitialize' drivers/built-in.o:(.rodata+0x47bc): undefined reference to `rt2x00pci_flush_queue' drivers/built-in.o:(.rodata+0x4818): undefined reference to `rt2x00pci_regbusy_read' make[5]: *** [vmlinux] Error 1 The missing functions are provided by the rt2x00pci module. This module is only selected by the rt2800pci driver if PCI support is enabled in the kernel, because some parts of the rt2x00pci code depends on PCI support. PCI support is not available on the RT3x5x SoCs because those have no PCI host controller at all. Move the non PCI specific code from rt2x00pci into a separate module. This makes it possible to use that code even if PCI support is disabled. The affected functions are used by all of the rt2x00 PCI drivers so select the new module for those drivers. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03rt2x00: rt2x00pci_regbusy_read() - only print register access failure onceTim Gardner1-2/+2
BugLink: http://bugs.launchpad.net/bugs/1128840 It appears that when this register read fails it never recovers, so I think there is no need to repeat the same error message ad infinitum. Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: users@rt2x00.serialmonkey.com Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-13rt2x00: fix rt2x00 to work with the new ralink SoC config symbolsJohn Crispin2-9/+9
Since v3.9-rc1 the kernel has basic support for Ralink WiSoC. The config symbols are named slightly different than before. Fix the rt2x00 to match the new symbols. The commit causing this breakage is: commit ae2b5bb6570481b50a7175c64176b82da0a81836 Author: John Crispin <blogic@openwrt.org> Date: Sun Jan 20 22:05:30 2013 +0100 MIPS: ralink: adds Kbuild files Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-01Merge branch 'master' of ↵John W. Linville1-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-02-27rt2x00: error in configurations with mesh support disabledFelix Fietkau1-2/+6
If CONFIG_MAC80211_MESH is not set, cfg80211 will now allow advertising interface combinations with NL80211_IFTYPE_MESH_POINT present. Add appropriate ifdefs to avoid running into errors. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-22Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds1-5/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
2013-02-15Merge branch 'for-john' of ↵John W. Linville1-4/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-02-15mac80211: stop modifying HT SMPS capabilityJohannes Berg1-4/+1
Instead of modifying the HT SMPS capability field for stations, track the SMPS mode explicitly in a new field in the station struct and use it in the drivers that care about it. This simplifies the code using it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-14rt2x00: check for dma mappings errorsStanislaw Gruszka4-13/+36
Check output of dma_map_single functions which nowadays can fail (when IOMMU is used). On write_beacon callbacks just print error, similar like padding error is handled by rt2800_write_beacon. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-12wireless: rt2x00: rt2800usb add "unknown" devicesXose Vazquez Perez1-0/+16
0x06f8, 0xe036 Hercules Wireless Dual Band 600 USB Key HWNUm-600 0x0b05, 0x17a7 ASUS USB-N10H 150Mbps 11n Wireless USB dongle 0x0df6, 0x0069 Sitecom Wireless Dualband Network Adapter 300N X5 WLA-5000 0x0df6, 0x006f Sitecom WiFi USB adapter N600 WLA-5100 0x13d3, 0x3340 AzureWave 802.11n USB Wireless LAN Card 0x13d3, 0x3399 AzureWave 802.11n USB Wireless LAN Card 0x13d3, 0x3400 AzureWave 802.11n USB Wireless LAN Card 0x13d3, 0x3401 AzureWave 802.11n USB Wireless LAN Card 0x1740, 0x0600 EnGenius Dual-Band Wireless Media Adapter 0x1740, 0x0602 EnGenius 802.11 a/b/g/n Wireless USB Adapter 0x177f, 0x0254 Sweex LW054 Wireless 54G Adapter USB 0xf201, 0x5370 TP-LINK 54Mbps Wireless USB Adapter no RF3053, and I believe no RT5572. Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08wireless: rt2x00: rt2800usb add Sweex idsXose Vazquez Perez1-0/+5
Info coming from Sweex Windows driver and wikidevi.com 0x177f,0x0163 Sweex LW163 RT3370 1x1, int. antenna 0x177f,0x0164 Sweex LW164 RT8070 1x1, Nano dongle 0x177f,0x0165 Sweex LW165 RT3370 1x1, ext. antenna 0x177f,0x0324 Sweex LW324 RT3072 2x2 with 32Mb NOR flash, autoinstall Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-01wireless: rt2x00: rt2800pci add idXose Vazquez Perez1-0/+1
0x1814,0x359f is a RT3592 802.11a/b/g/n 2x2 WiFi Adapter support added by 872834dfb38edc6f72cfc783a5ce78f2a9f36ec5 Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-01wireless: rt2x00: rt2800usb add/identify idsXose Vazquez Perez1-5/+9
Devices were taken from Ralink Linux drivers: - RT5370 0x043e, 0x7a32 0x043e, 0x7a42 0x0471, 0x2126 0x0471, 0x2180 0x0471, 0x2181 0x0471, 0x2182 Identify these ones: 0x04da, 0x23f6 in CONFIG_RT2800USB_RT53XX is a Panasonic device 0x07d1, 0x3c17 in RT2800USB_UNKNOWN is a RT3070 0x0586, 0x341a in RT2800USB_UNKNOWN is a RT3070 Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-31rt2x00: allow AP and mesh mode to operate simultaneouslyChun-Yeow Yeoh1-1/+2
Allow AP and Mesh mode to operate concurrently using single radio. Verify this using fonera 2.0n featuring RT3052 chipset and also TP-LINK TL-WN727N featuring RT5370 chipset. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemal.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-31rt2x00: remove NOTICEStanislaw Gruszka3-5/+3
We use this macro only on 3 places - remove it and replace by other appropriate macros for printing messages. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-31rt2800usb: move "TX status missed" messages to debug levelStanislaw Gruszka1-3/+3
Those messages can flood in dmesg, so do not print them by default. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-31rt2x00: print warning, notice and info as defaultStanislaw Gruszka1-2/+2
Some messages provide useful information, but are disabled without CONFIG_RT2X00_DEBUG=y, so enable them by default Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-31rt2x00: print chip and firmware version by defaultStanislaw Gruszka2-4/+4
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-23rt2x00: Improve TX status handling for BlockAckReq framesHelmut Schaa4-5/+169
Since rt2800 hardware isn't capable of reporting the TX status of BlockAckReq frames implement the TX status handling of BARs in rt2x00lib. We keep track of all BARs that are send out and try to match incoming BAs to the appropriate BARs. This allows us to report a more or less accurate TX status for BAR frames which in turn improves BA session stability. This is loosley based on Christian Lamparter's patch for carl9170 "carl9170: fix HT peer BA session corruption". We have to walk the list of pending BARs for every rx'red BA even though most BAs don't belong to any of these BARs as they are just acknowledging an AMPDU. To keep that overhead low use RCU which allows us to walk the list of pending BARs without the need to acquire a lock. This however requires us to _copy_ relevant information from the BAR (RA, TA, control field, start sequence number) into our BAR list entry. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Tested-by: Andreas Hartmann <andihartmann@01019freenet.de> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-23drivers/net/wireless/rt2x00: remove depends on CONFIG_EXPERIMENTALKees Cook1-5/+0
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: Ivo van Doorn <IvDoorn@gmail.com> CC: Gertjan van Wingerde <gwingerde@gmail.com> CC: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: John W. Linville <linville@tuxdriver.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-08rt2x00: rt2800: convert read_eeprom functions to return an int valueGabor Juhos4-21/+43
Both the rtt2x00usb_eeprom_read and the ioremap functions are allowed to fail, however their return values are not checked in the read_eeprom functions in the rt2800{pci,usb} drivers. The patch adds the missing checks, and converts all read_eeprom functions to return an int value, so the error values can be propagated up to the 'rt2800_validate_eeprom' function. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-08rt2800: refactor RFCSR initializationStanislaw Gruszka1-372/+423
rt2800_init_rfcsr() is too big, split RF initialization into per chip functions. Code will change, but we should setup the same values onto RF registers and in the same order as before. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-03mac80211: split TX aggregation stop actionJohannes Berg1-1/+3
When TX aggregation is stopped, there are a few different cases: - connection with the peer was dropped - session stop was requested locally - session stop was requested by the peer - connection was dropped while a session is stopping The behaviour in these cases should be different, if the connection is dropped then the driver should drop all frames, otherwise the frames may continue to be transmitted, aggregated in the case of a locally requested session stop or unaggregated in the case of the peer requesting session stop. Split these different cases so that the driver can act accordingly; however, treat local and remote stop the same way and ask the driver to not send frames as aggregated packets any more. In the case of connection drop, the stop callback the driver is otherwise supposed to call is no longer required. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-18rt2x00: zero-out rx_statusGabor Juhos1-0/+8
In commit 'mac80211: support radiotap vendor namespace RX data' new fields were added to 'struct ieee80211_rx_status' and those fileds must be zeroed. However the rt2x00 driver stores driver specific data in the cb array of the rx skbs, so the fields might contain garbage and this can cause unexpected behaviour. The rt2x00 driver from the compat-wireless-2012-12-01 tarball caused the following warning: WARNING: at /devel/ramips/build_dir/target-mipsel_r2_uClibc-0.9.33.2/linux-ramips_rt305x/ compat-wireless-2012-12-01/net/mac80211/rx.c:115 ieee80211_rx_irqsafe+0x274/0xbcc [mac80211]() Modules linked in: dwc_otg ledtrig_usbdev nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp ipt_MASQUERADE iptable_nat nf_nat pppoe xt_conntrack xt_CT xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack pppox ipt_REJECT xt_TCPMSS xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tables ppp_async ppp_generic slhc rt2800pci(O) rt2800lib(O) rt2x00soc(O) rt2x00pci(O) rt2x00lib(O) mac80211(O) usbcore usb_common nls_base crc_itu_t crc_ccitt eeprom_93cx6 cfg80211(O) compat(O) arc4 aes_generic crypto_blkcipher cryptomgr aead crypto_hash crypto_algapi leds_gpio button_hotplug(O) gpio_keys_polled input_polldev input_core Call Trace: [<801e96b4>] dump_stack+0x8/0x34 [<80010a9c>] warn_slowpath_common+0x78/0xa4 [<80010ae0>] warn_slowpath_null+0x18/0x24 [<80a9710c>] ieee80211_rx_irqsafe+0x274/0xbcc [mac80211] The patch ensures that each field gets initialized with zeroes. Cc: <users@rt2x00.serialmonkey.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-12Merge branch 'for-john' of git://git.sipsolutions.net/mac80211-nextJohn W. Linville2-5/+5
2012-12-12rt2800usb: reorganize 2001:3c1e in usb id table Wi-Fi adapterJohn W. Linville1-1/+1
Someone who physically disassembled the device confirms that its chipset is Ralink RT5370n. (Fixed-up after having already merged original patch. -- JWL) Signed-off-by: Maia Kozheva <sikon@ubuntu.com> Reviewed-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-11rt2800usb: Add support for 2001:3c1e (D-Link DWA-125 rev B1) USB Wi-Fi adapterMaia Kozheva1-0/+1
D-Link DWA-125/B1 is a relatively new USB Wi-Fi adapter, using a Ralink chipset supported by the rt2800usb driver. Currently, to work around the problem (it's missing in all present kernel versions, up to and including 3.7.x), I had to add this to /etc/rc.local: echo 2001 3c1e >> /sys/bus/usb/drivers/rt2800usb/new_id After that, the device works without problems. Been using it for over a week with no bugs in sight. The attached patch is trivial and simply adds the new USB ID to the list of devices handled by rt2800usb. Signed-off-by: Maia Kozheva <sikon@ubuntu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-07rt2x00: remove __dev* attributesBill Pemberton4-5/+5
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: users@rt2x00.serialmonkey.com (moderated for non-subscribers) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-06rt2x00: Only specify interface combinations if more then one interface is ↵Helmut Schaa1-0/+3
possible Otherwise rt2500* triggers a warning in cfg80211, from net/wireless/core.c: /* Combinations with just one interface aren't real */ if (WARN_ON(c->max_interfaces < 2)) This was introduced in commit 55d2e9da744ba11eae900b4bfc2da72eace3c1e1: rt2x00: Replace open coded interface checking with interface combinations. Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Cc: stable@vger.kernel.org [3.7+] Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-05Revert: "rt2x00: Don't let mac80211 send a BAR when an AMPDU subframe fails"Stanislaw Gruszka2-5/+5
This revert: commit be03d4a45c09ee5100d3aaaedd087f19bc20d01f Author: Andreas Hartmann <andihartmann@01019freenet.de> Date: Tue Apr 17 00:25:28 2012 +0200 rt2x00: Don't let mac80211 send a BAR when an AMPDU subframe fails To fix problem workaround by above commit use IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL flag (see change log for "mac80211: introduce IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL" patch). Resolve: https://bugzilla.kernel.org/show_bug.cgi?id=42828 Bisected-by: Francisco Pina Martins <f.pinamartins@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-03rt2x00: rt2800lib: introduce RFCSR3_VCOCAL_ENGabor Juhos2-2/+4
On the RF3290,RF5360,RF5370,RF5372,RF5390,RF5392 radio frontends, the VCO calibration can be controlled via the RFCSR3 register. The current code uses the RFCSR30_RF_CALIBRATION constant to enable the calibration, however that belongs to the RFCSR30 register. Although the values of the constant is correct, but using that for another register is confusing. Add a new definition for the VCO calibration enable bit of the RFCSR3 register and use that in the relevant places in order to avoid confusions. The patch contains no functional changes. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-03rt2x00: rt2800lib: remove trailing semicolons from RFCSR3_* definesGabor Juhos1-2/+2
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-03rt2x00: rt2800lib: fix indentation in rt2800_init_rfcsrGabor Juhos1-60/+60
The patch contains no functional changes. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-03rt2x00: rt2800lib: fix indentation of some rt2x00_rt callsGabor Juhos1-9/+9
The patch contains no functional changes. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-30rt2x00: Use addr_mask to disallow invalid MAC addresses in mutli-bssid modeHelmut Schaa1-0/+7
Reported-by: Petr Stetiar <ynezz@true.cz> Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-21Merge branch 'master' of ↵John W. Linville1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c drivers/net/wireless/iwlwifi/pcie/tx.c
2012-11-16Merge branch 'for-john' of ↵John W. Linville2-12/+13
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2012-11-14Wireless: rt2x00: Add device id for Sweex LW323 to rt2800usb.cJaume Delclòs1-0/+1
This patch adds detection for the Sweex LW323 USB wireless network card in the rt2x00 driver (just one line in rt2800usb.c). It applies to linux-3.7-rc3. Signed-off-by: Jaume Delclòs <jaume@delclos.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-09mac80211: clarify interface iteration and make it configurableJohannes Berg2-12/+13
During hardware restart, all interfaces are iterated even though they haven't been re-added to the driver, document this behaviour. The same also happens during resume, which is even more confusing since all of the interfaces were previously removed from the driver. Make this optional so drivers relying on the current behaviour can still use it, but to let drivers that don't want this behaviour disable it. Also convert all API users, keeping the old semantics except in hwsim, where the new normal ones are desired. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-30rt2800: validate step value for temperature compensationStanislaw Gruszka1-1/+1
Some hardware has correct (!= 0xff) value of tssi_bounds[4] in the EEPROM, but step is equal to 0xff. This results on ridiculous delta calculations and completely broke TX power settings. Reported-and-tested-by: Pavel Lucik <pavel.lucik@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-30Merge branch 'master' of ↵John W. Linville3-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/mwifiex/cfg80211.c
2012-10-24rt2x00: usb: fix reset resumeStanislaw Gruszka3-0/+3
Patch fixes warnings like below happened on resume: WARNING: at net/mac80211/driver-ops.h:12 check_sdata_in_driver+0x32/0x34() Problem is that in __ieee80211_susped() we remove sdata (i.e wlan0 interface) and then during resume we call usb_unbind_interface() -> ieee80211_unregister_hw() with sdata removed. Patch fixes problem by adding .reset_resume calback, hence we do not unbind usb device on resume. This callback can be the same as normal .resume callback, sice we do all needed initalization during interface start, which is performed on resume [ ieee80211_resume() -> ieee80211_reconfig() -> rt2x00mac_start() -> rt2x00lib_start ]. Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=48041 Reported-by: David Herrmann <dh.herrmann@googlemail.com> Reported-and-tested-by: Stephen Boyd <bebarino@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-19rt2800: comment tx power settingsStanislaw Gruszka1-3/+19
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-19rt2800: allow to reduce tx power on devices not exporting power limitStanislaw Gruszka1-0/+27
Some rt2800 devices don't have their calibrated max eirp tx power in their calibration data. For those devices reduce tx power according to difference between regulatory max channel power and requested tx power. This patch is based on Helmut Schaa work. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-19rt2800: pass channel pointer to rt2800_config_txpowerStanislaw Gruszka1-4/+5
Preparation for use regulatory max channel power in TX power delta calculations. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-19rt2800: use eeprom OFDM 6M TX power as criterionStanislaw Gruszka1-5/+6
Don use TX_PWR_CFG_0 register value of OFDM 6M tx power as criterion since it can be changed. The same do vendor driver (see AsicAdjustSingleSkuTxPower and AsicGetTxPowerOffset functions from 2011_0719_RT3070_RT3370_RT5370_RT5372_Linux_STA_V2.5.0.3_DPO). Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-19rt2800: compensate tx power also for non 11b rates on 2GHzStanislaw Gruszka1-3/+0
We skip compensate calculation for non 11b rates on 2.4GHz band. I do not see that on vendor driver (2011_0719_RT3070_RT3370_RT5370_RT5372_Linux_STA_V2.5.0.3_DPO). Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-19rt2800: limit TX_PWR_CFG_ values to 0xcStanislaw Gruszka1-1/+2
Based on AsicAdjustTxPower function from vendor driver (2011_0719_RT3070_RT3370_RT5370_RT5372_Linux_STA_V2.5.0.3_DPO) limit per rate TX power values we program into TX_PWR_CFG_ registers. Note that on some configurations (devices/rates) is allowed to use bigger values than 0xc, but we use safe maximum value for now. Further work need to be done to allow use bigger values than 0xc. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-19rt2800: use BBP_R1 for setting tx powerStanislaw Gruszka1-8/+19
TX power delta can be negative. TX_PWR_CFG_ registers allow to set delta only in range between 0 dBm and 15 dBm (4 bits for each rate). Se we need to use BBP_R1 to configure negative deltas. Not utilize +6 dBm increasing BBP_R1 option for safety reason. For now, this can be used for devices, which export maximum allowed TX power value. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-06rt2x00/rt3352: Fix lnagain assignment to use register 66.Daniel Golle1-2/+2
This should be register 66 instead of 62. (probably happened by copy&past'ing from the lines below) Signed-off-by: Daniel Golle <dgolle@allnet.de> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-23 23:41:31 +0300