summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/rt2x00/rt2800usb.c
AgeCommit message (Collapse)AuthorFilesLines
2015-11-18rt2x00: move under ralink vendor directoryKalle Valo1-1462/+0
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-09-26rt2800usb: add usb ID 1b75:3070 for Airlive WT-2000USBStanislaw Gruszka1-0/+1
Brand: Airlive (Ovislink Corp.) Name: Turbo-G USB Adaptor Model: WT-2000USB USB ID: 1b75:3070 Reported-and-tested-by: Michael Coates <michlinux@hotmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-06mac80211: extend get_tkip_seq to all keysJohannes Berg1-1/+1
Extend the function to read the TKIP IV32/IV16 to read the IV/PN for all ciphers in order to allow drivers with full hardware crypto to properly support this. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30rt2800usb: check Autorun mode on FW load only onceStanislaw Gruszka1-0/+1
Seems H/W report correctly firmware Autorun value only at initialization stage. When we close interface and open it again, Autorun value is 0 and we try to load firmware what kills the device. To fix clear REQUIRE_FIRMWARE firmware flag, to do not load firmware again, once we discover Autorun mode. Reported-and-tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-20rt2x00: add new rt2800usb device DWA 130Scott Branden1-0/+1
Add the USB Id to link the D-Link DWA 130 USB Wifi adapter to the rt2830 driver. Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Pieter Truter <ptruter@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16rt2x00usb: drop rt2x00usb_disable_radio() from rt2800usb_disable_radio()Sebastian Andrzej Siewior1-1/+0
I have here FRITZ!WLAN USB Stick N v2 / idVendor=057c, idProduct=8501 and every single of this requests ends up with: |ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor Request 0x0c failed for offset 0x0000 with error -32 I was browsing the the vedor code and I haven't seen such request so I remove it with this patch. If I wasn't look enough or if this error is expected then please excuse :) Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16rt2x00usb: check USB's request error code in rt2800usb_autorun_detect()Sebastian Andrzej Siewior1-3/+7
rt2800usb_autorun_detect() blindly assumes assumes that it worked while it could have failed. Check the error code here. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-10-30wireless: rt2x00: add new rt2800usb deviceCyril Brulebois1-0/+1
0x1b75 0xa200 AirLive WN-200USB wireless 11b/g/n dongle References: https://bugs.debian.org/766802 Reported-by: Martin Mokrejs <mmokrejs@fold.natur.cuni.cz> Cc: stable@vger.kernel.org Signed-off-by: Cyril Brulebois <kibi@debian.org> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-16wireless: rt2x00: add new rt2800usb devicesXose Vazquez Perez1-0/+4
0x0b05 0x17e8 RT5372 USB 2.0 bgn 2x2 ASUS USB-N14 0x0411 0x0253 RT5572 USB 2.0 abgn 2x2 BUFFALO WLP-U2-300D 0x0df6 0x0078 RT???? Sitecom N300 Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-07rt2800usb: Don't perform DMA from stackAndrea Merello1-6/+22
Function rt2800usb_autorun_detect() passes the address of a variable allocated onto the stack to be used for DMA by the USB layer. This has been caught by my debugging-enabled kernel. This patch change things in order to allocate that variable via kmalloc, and it adjusts things to handle the kmalloc failure case, propagating the error. [ 7363.238852] ------------[ cut here ]------------ [ 7363.243529] WARNING: CPU: 1 PID: 5235 at lib/dma-debug.c:1153 check_for_stack+0xa4/0xf0() [ 7363.251759] ehci-pci 0000:00:04.1: DMA-API: device driver maps memory fromstack [addr=ffff88006b81bad4] [ 7363.261210] Modules linked in: rt2800usb(O+) rt2800lib(O) rt2x00usb(O) rt2x00lib(O) rtl818x_pci(O) rtl8187 led_class eeprom_93cx6 mac80211 cfg80211 [last unloaded: rt2x00lib] [ 7363.277143] CPU: 1 PID: 5235 Comm: systemd-udevd Tainted: G O 3.16.0-rc3-wl+ #31 [ 7363.285546] Hardware name: System manufacturer System Product Name/M3N78 PRO, BIOS ASUS M3N78 PRO ACPI BIOS Revision 1402 12/04/2009 [ 7363.297511] 0000000000000009 ffff88006b81b710 ffffffff8175dcad ffff88006b81b758 [ 7363.305062] ffff88006b81b748 ffffffff8106d372 ffff88006cf10098 ffff88006cead6a0 [ 7363.312622] ffff88006b81bad4 ffffffff81c1e7c0 ffff88006cf10098 ffff88006b81b7a8 [ 7363.320161] Call Trace: [ 7363.322661] [<ffffffff8175dcad>] dump_stack+0x4d/0x6f [ 7363.327847] [<ffffffff8106d372>] warn_slowpath_common+0x82/0xb0 [ 7363.333893] [<ffffffff8106d3e7>] warn_slowpath_fmt+0x47/0x50 [ 7363.339686] [<ffffffff813a93b4>] check_for_stack+0xa4/0xf0 [ 7363.345298] [<ffffffff813a995c>] debug_dma_map_page+0x10c/0x150 [ 7363.351367] [<ffffffff81521bd9>] usb_hcd_map_urb_for_dma+0x229/0x720 [ 7363.357890] [<ffffffff8152256d>] usb_hcd_submit_urb+0x2fd/0x930 [ 7363.363929] [<ffffffff810eac31>] ? irq_work_queue+0x71/0xd0 [ 7363.369617] [<ffffffff810ab5a7>] ? wake_up_klogd+0x37/0x50 [ 7363.375219] [<ffffffff810ab7a5>] ? console_unlock+0x1e5/0x420 [ 7363.381081] [<ffffffff810abc25>] ? vprintk_emit+0x245/0x530 [ 7363.386773] [<ffffffff81523d3c>] usb_submit_urb+0x30c/0x580 [ 7363.392462] [<ffffffff81524295>] usb_start_wait_urb+0x65/0xf0 [ 7363.398325] [<ffffffff815243ed>] usb_control_msg+0xcd/0x110 [ 7363.404014] [<ffffffffa005514d>] rt2x00usb_vendor_request+0xbd/0x170 [rt2x00usb] [ 7363.411544] [<ffffffffa0074292>] rt2800usb_autorun_detect+0x32/0x50 [rt2800usb] [ 7363.418986] [<ffffffffa0074aa1>] rt2800usb_read_eeprom+0x11/0x70 [rt2800usb] [ 7363.426168] [<ffffffffa0063ffd>] rt2800_probe_hw+0x11d/0xf90 [rt2800lib] [ 7363.432989] [<ffffffffa0074b7d>] rt2800usb_probe_hw+0xd/0x50 [rt2800usb] [ 7363.439808] [<ffffffffa00453d8>] rt2x00lib_probe_dev+0x238/0x7c0 [rt2x00lib] [ 7363.446992] [<ffffffffa00bfa48>] ? ieee80211_led_names+0xb8/0x100 [mac80211] [ 7363.454156] [<ffffffffa0056116>] rt2x00usb_probe+0x156/0x1f0 [rt2x00usb] [ 7363.460971] [<ffffffffa0074250>] rt2800usb_probe+0x10/0x20 [rt2800usb] [ 7363.467616] [<ffffffff8152799e>] usb_probe_interface+0xce/0x1c0 [ 7363.473651] [<ffffffff81480c20>] really_probe+0x70/0x240 [ 7363.479079] [<ffffffff81480f01>] __driver_attach+0xa1/0xb0 [ 7363.484682] [<ffffffff81480e60>] ? __device_attach+0x70/0x70 [ 7363.490461] [<ffffffff8147eef3>] bus_for_each_dev+0x63/0xa0 [ 7363.496146] [<ffffffff814807c9>] driver_attach+0x19/0x20 [ 7363.501570] [<ffffffff81480468>] bus_add_driver+0x178/0x220 [ 7363.507270] [<ffffffff8148151b>] driver_register+0x5b/0xe0 [ 7363.512874] [<ffffffff815271b0>] usb_register_driver+0xa0/0x170 [ 7363.518905] [<ffffffffa007a000>] ? 0xffffffffa0079fff [ 7363.524074] [<ffffffffa007a01e>] rt2800usb_driver_init+0x1e/0x20 [rt2800usb] [ 7363.531247] [<ffffffff810002d4>] do_one_initcall+0x84/0x1b0 [ 7363.536932] [<ffffffff8113aa60>] ? kfree+0xd0/0x110 [ 7363.541931] [<ffffffff8112730a>] ? __vunmap+0xaa/0xf0 [ 7363.547538] [<ffffffff810ca07e>] load_module+0x1aee/0x2040 [ 7363.553141] [<ffffffff810c6f10>] ? store_uevent+0x50/0x50 [ 7363.558676] [<ffffffff810ca66e>] SyS_init_module+0x9e/0xc0 [ 7363.564285] [<ffffffff81764012>] system_call_fastpath+0x16/0x1b [ 7363.570338] ---[ end trace 01ef5f822bea9882 ]--- Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-17rt2800usb:fix hang during firmware loadMichael Braun1-2/+7
The device 057c:8501 (AVM Fritz! WLAN v2 rev. B) boots into a state that does not actually require loading a firmware file. The vendors driver finds out about this by checking a firmware state register, so this patch adds this here. Finally, with this patch applied, my wifi dongle actually becomes useful (scan + connect to wpa network works). Signed-off-by: Michael Braun <michael-dev@fami-braun.de> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-17rt2800usb:fix efuse detectionMichael Braun1-1/+29
The device 057c:8501 (AVM Fritz! WLAN v2 rev. B) currently does not load. One thing observed is that the vendors driver detects EFUSE mode for this device, but rt2800usb does not. This is due to rt2800usb lacking a check for the firmware mode present in the vendors driver, that this patch adopts for rt2800usb. With this patch applied, the 'RF chipset' detection does no longer fail. Signed-off-by: Michael Braun <michael-dev@fami-braun.de> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-25wireless/rt2x00: don't use PREPARE_WORK in rt2800usb.cTejun Heo1-1/+1
PREPARE_[DELAYED_]WORK() are being phased out. They have few users and a nasty surprise in terms of reentrancy guarantee as workqueue considers work items to be different if they don't have the same work function. Update rt2800usb.c to use INIT_WORK() instead of PREPARE_WORK(). As the work item isn't in active use during rt2800usb_probe_hw(), this doesn't cause any behavior difference. It would probably be best to route this with other related updates through the workqueue tree. Only compile tested. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: linux-wireless@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13rt2x00: move frequent messages to debug levelStanislaw Gruszka1-5/+5
On commit 28f2bce9f8bbf704c86f8c684337f82c51592c81 I make change that print various messages as default. This can cause flood of messages related to TX status timeout on some environments. I partially fixed problem on commit bb9c298f3193ac5b80e47b325c690700580b6bcf, but forgot to move two more messages to debug level. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-23rt2x00: rt2800usb: mark D-Link DWA-137 as supportedRoman Dubtsov1-0/+1
Signed-off-by: Roman Dubtsov <dubtsov@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-04wireless: delete non-required instances of include <linux/init.h>Paul Gortmaker1-1/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-11rt2x00: Fix FSF address in file headersJeff Kirsher1-3/+1
Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. CC: linux-wireless@vger.kernel.org CC: Ivo van Doorn <IvDoorn@gmail.com> CC: Gertjan van Wingerde <gwingerde@gmail.com> CC: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-15kfifo API type safetyStefani Seibold1-1/+1
This patch enhances the type safety for the kfifo API. It is now safe to put const data into a non const FIFO and the API will now generate a compiler warning when reading from the fifo where the destination address is pointing to a const variable. As a side effect the kfifo_put() does now expect the value of an element instead a pointer to the element. This was suggested Russell King. It make the handling of the kfifo_put easier since there is no need to create a helper variable for getting the address of a pointer or to pass integers of different sizes. IMHO the API break is okay, since there are currently only six users of kfifo_put(). The code is also cleaner by kicking out the "if (0)" expressions. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Stefani Seibold <stefani@seibold.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-04Merge branch 'master' of ↵John W. Linville1-4/+8
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/pcie/drv.c
2013-10-18rt2800usb: slow down TX status pollingStanislaw Gruszka1-4/+8
Polling TX statuses too frequently has two negative effects. First is randomly peek CPU usage, causing overall system functioning delays. Second bad effect is that device is not able to fill TX statuses in H/W register on some workloads and we get lot of timeouts like below: ieee80211 phy4: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2 ieee80211 phy4: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2 ieee80211 phy4: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping This not only cause flood of messages in dmesg, but also bad throughput, since rate scaling algorithm can not work optimally. In the future, we should probably make polling interval be adjusted automatically, but for now just increase values, this make mentioned problems gone. Resolve: https://bugzilla.kernel.org/show_bug.cgi?id=62781 Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-04wireless: rt2x00: rt2800usb: add new devicesXose Vazquez Perez1-1/+16
0411,0241 RT5572 BUFFALO WI-U2-300D Wireless LAN Adapter 0789,0170 RT3572 Logitec LAN-W300AN/U2 0846,9013 RT3573 NETGEAR Adaptador USB Inalambrico Movistar 0df6,006e RT3573 Sitecom WiFi USB adapter N900 2001,3c1f RT3573 D-Link DWA-162 Wireless N900 Dual Band Adapter 2001,3c20 RT5372 D-Link DWA-140 Wireless N USB Adapter(rev.D) 2001,3c21 RT5572 D-Link DWA-160 Xtreme N Dual Band USB Adapter(rev.C) 2001,3c22 RT5372 D-Link DWA-132 Wireless N USB Adapter(rev.B) 2001,3c23 RT5372 D-Link GO-USB-N300 Wireless N Easy USB Adapter 2019,ab29 ? Planex GW-USMirco300 20f4,724a RT5572 TRENDnet N600 Wireless Dual Band USB Adapter Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-28rt2800usb: Add WLI-UC-G300HP's Product ID.Masami Ichikawa1-0/+1
Support Bufallo WLI-UC-G300HP. Signed-off-by: Masami Ichikawa <masami256@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16rt2x00: rt2800lib: introduce rt2800_get_txwi_rxwi_size helperGabor Juhos1-10/+1
The rt2800pci driver uses the same [RT]XWI size for all chipsets, however some chips requires different values. The size of the [RT]XWI structures is a constant value for a given chipset and it does not depend on the underlying interface. Add a helper function which returns the correct values for the actual chipset and use the new helper both in the rt2800usb and in the rt2800pci drivers. This ensures that both drivers are using the correct values. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24wireless: rt2x00: rt2800usb: add RT3573 devicesXose Vazquez Perez1-0/+30
taken from Ralink linux and windows drivers: 0x1b75, 0x7733 AirLive 450Mbps Wireless-N Dual Band USB Adapter 0x0b05, 0x17bc ASUS USB-N66 450Mbps Dual Band USB Adapter 0x0b05, 0x17ad ASUS USB-N66 Dual Band N Network Adapter 0x050d, 0x1103 Belkin Wireless Adapter 0x148f, 0xf301 Cameo Ralink3573 3x3 single band USB dongle 0x7392, 0x7733 Edimax 0x0e66, 0x0020 Hawking HD45U Dual Band USB Wireless-N Adapter 0x0e66, 0x0021 Hawking HD45U Dual Band Wls-450N Adapter 0x04bb, 0x094e I-O DATA WN-AG450U Wireless LAN Adapter 0x0789, 0x016b Logitec LAN-W450AN/U2 0x0846, 0x9012 NETGEAR WNDA4100 N900 Wireless Dual Band USB Adapter 0x0846, 0x9019 NETGEAR WNDA4200D Wireless Dual Band USB Adapter 0x2019, 0xed19 Planex GW-USDual450 0x148f, 0x3573 Ralink 802.11n USB Wireless LAN Card 0x0df6, 0x0067 Sitecom Wireless Dualband Network Adapter N750 X6 0x0df6, 0x006a Sitecom Wireless Dualband Network Adapter N900 X7 0x0586, 0x3421 ZyXEL Dual-Band Wireless N450 USB Adapter Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23rt2x00: rt2800usb: add USB device ID for Linksys AE3000Gabor Juhos1-0/+4
The Linksys AE3000 device is based on the RT3573 chipset. The support for this chipset is available already, and the AE3000 device works with the driver. Only managed mode works correctly at the moment, for AP mode additional changes are needed in the driver. Also add a new RT2800USB_RT3573 Kconfig option and only enable support for RT3573 based devices if that is enabled. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23rt2x00: rt2800usb: use correct [RT]XWI size for RT3593Gabor Juhos1-1/+4
The RT3593 chipset requires different [RT]XWI size values. Modify the driver to use the correct values. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24rt2x00: rt2800: unify [RT]XWI_SIZE definesGabor Juhos1-4/+4
Use common names instead of chip specific ones. The patch contains no functional changes, but it makes it easier to add support for further descriptor sizes. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12rt2x00: rt2800usb: nuke rt2800usb_ops_5592Gabor Juhos1-24/+5
It is exactly the same like the generic rt2800usb_ops. Remove the duplicate and use the generic ops for all devices. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12rt2x00: move extra_tx_headroom field from rt2x00_ops to rt2x00_devGabor Juhos1-2/+0
The extra_tx_headroom field of struct rt2x00_ops indicates the extra TX headroom size required for a given device. This data is redundant, the value can be computed from the desc_size and winfo_size fields of the TX queues. Move the extra_tx_headroom field to struct rt2x00_dev, compute its value in the probe routine and use the cached value in the rest of the code. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12rt2x00: rt2800usb: implement queue_init callbackGabor Juhos1-52/+48
The generic rt2x00 code has been changed to allow the drivers toimplement dynamic data_queue initialization. Remove the static data queue descriptor structures and implement the queue_init callback instead. The actual chipset is already known when the callback is used. This allows us to use a single callback for all supported devices. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22rt2x00: rt2800usb: use rt2x00dev->rx->limitGabor Juhos1-1/+1
The RX data queue is initialized already when the rt2800_usb_enable_radio() function is called. Fetch the number of the queue entries from that instead of using the entry_num field of the data queue descriptor. The two values are the same, and the use of the rt2x00dev->rx->limit value allows us to get rid of a superfluous pointer dereference. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22rt2x00: Use more current logging styles, shrink object sizeJoe Perches1-21/+20
Reduce object space ~2% using more current logging styles. Neaten and simplify logging macros. Use wiphy_<level> where appropriate. Coalesce formats. Convert ERROR/WARNING/INFO macros to rt2x00_<level> Convert EEPROM to rt2x00_eeprom_dbg Convert PROBE_ERROR to rt2x00_probe_err Convert DEBUG to rt2x00_dbg Convert EEPROM to rt2x00_eeprom_dbg $ size drivers/net/wireless/rt2x00/built-in.o* text data bss dec hex filename 245639 71696 69584 386919 5e767 drivers/net/wireless/rt2x00/built-in.o.new 240609 70096 68944 379649 5cb01 drivers/net/wireless/rt2x00/built-in.o.new.nodyndbg 240609 70096 68944 379649 5cb01 drivers/net/wireless/rt2x00/built-in.o.new.no_rt2x00_debug 249198 70096 70352 389646 5f20e drivers/net/wireless/rt2x00/built-in.o.old 249198 70096 70352 389646 5f20e drivers/net/wireless/rt2x00/built-in.o.old.nodyndbg 244222 70096 69712 384030 5dc1e drivers/net/wireless/rt2x00/built-in.o.old.no_rt2x00_debug Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22rt2x00: provide separate information about TXWI & RXWI sizesStanislaw Gruszka1-12/+13
On new 2800 hardware sizes of TXWI & RXIW can be different than TXD & RXD sizes, so we need to difference between them. Let's define winfo_size as size of in buffer descriptor (TXWI & RXWI), and desc_size of as size of additional descriptor - in separate DMA coherent buffer for PCI hardware (TXD & RXD) and yet another in buffer descriptor for USB hardware (TXINFO & RXINFO). Change is rt2x00 wild, but should affect only 2800 driver. Patch also fix beaconing for 5592usb AP mode. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-19rt2800: 5592: add more USB devices IDsStanislaw Gruszka1-0/+9
Reported-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-19rt2800: 5592: TXWI & RXWI descriptors sizeStanislaw Gruszka1-2/+51
Based on: TXWI_STRUC RXWI_STRUC from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/include/chip/rtmp_mac.h Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-19rt2800: 5592: early definesStanislaw Gruszka1-0/+3
Add basic defines for 5592 chip. It can not be enabled until CONFIG_RT2800USB_RT55XX configuration option will be provided in the Kconfig. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-12wireless: rt2x00: rt2800usb add "unknown" devicesXose Vazquez Perez1-0/+16
0x06f8, 0xe036 Hercules Wireless Dual Band 600 USB Key HWNUm-600 0x0b05, 0x17a7 ASUS USB-N10H 150Mbps 11n Wireless USB dongle 0x0df6, 0x0069 Sitecom Wireless Dualband Network Adapter 300N X5 WLA-5000 0x0df6, 0x006f Sitecom WiFi USB adapter N600 WLA-5100 0x13d3, 0x3340 AzureWave 802.11n USB Wireless LAN Card 0x13d3, 0x3399 AzureWave 802.11n USB Wireless LAN Card 0x13d3, 0x3400 AzureWave 802.11n USB Wireless LAN Card 0x13d3, 0x3401 AzureWave 802.11n USB Wireless LAN Card 0x1740, 0x0600 EnGenius Dual-Band Wireless Media Adapter 0x1740, 0x0602 EnGenius 802.11 a/b/g/n Wireless USB Adapter 0x177f, 0x0254 Sweex LW054 Wireless 54G Adapter USB 0xf201, 0x5370 TP-LINK 54Mbps Wireless USB Adapter no RF3053, and I believe no RT5572. Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08wireless: rt2x00: rt2800usb add Sweex idsXose Vazquez Perez1-0/+5
Info coming from Sweex Windows driver and wikidevi.com 0x177f,0x0163 Sweex LW163 RT3370 1x1, int. antenna 0x177f,0x0164 Sweex LW164 RT8070 1x1, Nano dongle 0x177f,0x0165 Sweex LW165 RT3370 1x1, ext. antenna 0x177f,0x0324 Sweex LW324 RT3072 2x2 with 32Mb NOR flash, autoinstall Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-01wireless: rt2x00: rt2800usb add/identify idsXose Vazquez Perez1-5/+9
Devices were taken from Ralink Linux drivers: - RT5370 0x043e, 0x7a32 0x043e, 0x7a42 0x0471, 0x2126 0x0471, 0x2180 0x0471, 0x2181 0x0471, 0x2182 Identify these ones: 0x04da, 0x23f6 in CONFIG_RT2800USB_RT53XX is a Panasonic device 0x07d1, 0x3c17 in RT2800USB_UNKNOWN is a RT3070 0x0586, 0x341a in RT2800USB_UNKNOWN is a RT3070 Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-31rt2800usb: move "TX status missed" messages to debug levelStanislaw Gruszka1-3/+3
Those messages can flood in dmesg, so do not print them by default. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-08rt2x00: rt2800: convert read_eeprom functions to return an int valueGabor Juhos1-4/+8
Both the rtt2x00usb_eeprom_read and the ioremap functions are allowed to fail, however their return values are not checked in the read_eeprom functions in the rt2800{pci,usb} drivers. The patch adds the missing checks, and converts all read_eeprom functions to return an int value, so the error values can be propagated up to the 'rt2800_validate_eeprom' function. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-12rt2800usb: reorganize 2001:3c1e in usb id table Wi-Fi adapterJohn W. Linville1-1/+1
Someone who physically disassembled the device confirms that its chipset is Ralink RT5370n. (Fixed-up after having already merged original patch. -- JWL) Signed-off-by: Maia Kozheva <sikon@ubuntu.com> Reviewed-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-11rt2800usb: Add support for 2001:3c1e (D-Link DWA-125 rev B1) USB Wi-Fi adapterMaia Kozheva1-0/+1
D-Link DWA-125/B1 is a relatively new USB Wi-Fi adapter, using a Ralink chipset supported by the rt2800usb driver. Currently, to work around the problem (it's missing in all present kernel versions, up to and including 3.7.x), I had to add this to /etc/rc.local: echo 2001 3c1e >> /sys/bus/usb/drivers/rt2800usb/new_id After that, the device works without problems. Been using it for over a week with no bugs in sight. The attached patch is trivial and simply adds the new USB ID to the list of devices handled by rt2800usb. Signed-off-by: Maia Kozheva <sikon@ubuntu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-14Wireless: rt2x00: Add device id for Sweex LW323 to rt2800usb.cJaume Delclòs1-0/+1
This patch adds detection for the Sweex LW323 USB wireless network card in the rt2x00 driver (just one line in rt2800usb.c). It applies to linux-3.7-rc3. Signed-off-by: Jaume Delclòs <jaume@delclos.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-24rt2x00: usb: fix reset resumeStanislaw Gruszka1-0/+1
Patch fixes warnings like below happened on resume: WARNING: at net/mac80211/driver-ops.h:12 check_sdata_in_driver+0x32/0x34() Problem is that in __ieee80211_susped() we remove sdata (i.e wlan0 interface) and then during resume we call usb_unbind_interface() -> ieee80211_unregister_hw() with sdata removed. Patch fixes problem by adding .reset_resume calback, hence we do not unbind usb device on resume. This callback can be the same as normal .resume callback, sice we do all needed initalization during interface start, which is performed on resume [ ieee80211_resume() -> ieee80211_reconfig() -> rt2x00mac_start() -> rt2x00lib_start ]. Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=48041 Reported-by: David Herrmann <dh.herrmann@googlemail.com> Reported-and-tested-by: Stephen Boyd <bebarino@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-25rt2x00: Deprecate max_sta_intf field of struct rt2x00_ops.Gertjan van Wingerde1-1/+0
All drivers set this value to 1, so there is no need (currently) to let drivers set this. Therefor, remove the field; we can always add it back when it is needed. Inspired by an earlier patch from Paul Fertser. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Paul Fertser <fercerpav@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07rt2x00: rt2800 - Make probe_hw function common between PCI and USB.Gertjan van Wingerde1-50/+11
Refactor the probe_hw code so that more code can be shared between rt2800pci and rt2800usb. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07rt2x00: Unify GPIO register field namingsGertjan van Wingerde1-3/+3
The various rt2x00 drivers use different methods to name the different GPIO register fields indicating the GPIO pin value and the fields indicating the direction. Start using a unified naming scheme for the GPIO register fields: - <csr>_VAL<x> for fields indicating the GPIO pin value. - <csr>_DIR<x> for fields indicating the GPIO pin direction. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo Van Doorn <ivdoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-05rt2800usb: Added rx packet length validity checkSergei Poselenov1-1/+9
On our system (ARM Cortex-M3 SOC running linux-2.6.33) frequent crashes were observed in the rt2800usb module because of the invalid length of the received packet (3392, 46920...). This patch adds the sanity check on the packet legth. Also, changed WARNING to ERROR in rt2x00lib_rxdone() so that the bad packet condition would be noticed. The fix was tested on the latest compat-wireless-3.5.1-1-snpc. Cc: stable@vger.kernel.org Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-05rt2x00: Fix rfkill polling prior to interface start.Gertjan van Wingerde1-0/+9
We need to program the rfkill switch GPIO pin direction to input at device initialization time, not only when the interface is brought up. Doing this only when the interface is brought up could lead to rfkill detecting the switch is turned on erroneously and inability to create the interface and bringing it up. Reported-and-tested-by: Andreas Messer <andi@bastelmap.de> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Cc: <stable@vger.kernel.org> Acked-by: Ivo Van Doorn <ivdoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-22 19:08:25 +0300