summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/rt2x00/rt2800.h
AgeCommit message (Collapse)AuthorFilesLines
2015-11-18rt2x00: move under ralink vendor directoryKalle Valo1-2986/+0
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-15rt2800: fix assigning same WCID for different stationsStanislaw Gruszka1-0/+10
On some hardware reading WCID entries table results getting 0xff numbers, no matter of value written there before. This cause assigning the same WCID for different stations and makes not possible to connect to more than one station. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-09-27rt2800: correct BBP1_TX_POWER_CTRL maskStanislaw Gruszka1-1/+1
Two bits control TX power on BBP_R1 register. Correct the mask, otherwise we clear additional bit on BBP_R1 register, what can have unknown, possible negative effect. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28rt2x00: support Ralink 5362.Canek Peláez Valdés1-1/+3
Signed-off-by: Canek Peláez Valdés <canek@ciencias.unam.mx> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-11rt2x00: Fix FSF address in file headersJeff Kirsher1-3/+1
Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. CC: linux-wireless@vger.kernel.org CC: Ivo van Doorn <IvDoorn@gmail.com> CC: Gertjan van Wingerde <gwingerde@gmail.com> CC: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14rt2x00: cleanup indentation in rt2800.hGabor Juhos1-21/+21
Adjust whitespaces to move badly aligned constants to the right column. The patch contains no functional changes. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-04rt2800: add support for radio chip RF3070Stanislaw Gruszka1-0/+2
Add support for new RF chip ID: 3070. It seems to be the same as 5370, maybe vendor just put wrong value on the eeprom, but add this id anyway since devices with it showed on the marked. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-26rt2x00: rt2800lib: don't hardcode beacon offsetsGabor Juhos1-0/+2
The values written into the BCN_OFFSET[01] registers are hardcoded in the rt2800_init_register function. Add a macro and a helper function to derive these values directly from the base address of a given beacon, and use the new function instead of the hardcoded numbers. The patch contains no functional changes. The programmed register values are the same before and after the patch. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-22rt2x00: rt2800lib: use a MCU command for frequency adjustment on USB devicesGabor Juhos1-0/+1
According to the Ralink driver, there is an MCU command which can be used to send the frequency offset value directly to the USB device without going through the RFCSR writing sequence. Based on the DPO_RT5572_LinuxSTA_2.6.0.1_20120629 driver. Reference: RTMPAdjustFrequencyOffset function in common/rt_rf.c Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-22rt2x00: rt2800: rename HW_BEACON_OFFSET macroGabor Juhos1-1/+1
The name of the HW_BEACON_OFFSET macro is a bit confusing. It returns with one of the HW_BEACON_BASE* values, so rename the macro to HW_BEACON_BASE to reflect that. The patch contains no functional changes. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23rt2x00: rt2800usb: use correct [RT]XWI size for RT3593Gabor Juhos1-0/+1
The RT3593 chipset requires different [RT]XWI size values. Modify the driver to use the correct values. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23rt2x00: rt2800lib: add channel configuration for RF3053Gabor Juhos1-2/+44
Based on the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629 driver. Reference: RT3593_ChipSwitchChannel in chips/rt3593.c Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23rt2x00: rt2800lib: fix LNA_A[12] gain values for RT3593Gabor Juhos1-0/+4
The LNA_A[12] gain values are stored at a different offset in the EEPROM on RT3593 based devices. However the current code unconditionally reads those values from the location used by other chipsets. Fix the code to use the correct EEPROM offset. Based on the DPO_RT5572_LinuxSTA_2.6.0.1_20120629 driver. References: RT3593_EEPROM_RSSI2_OFFSET_ALNAGAIN1_24G_READ in include/chip/rt3593.h RT3593_EEPROM_RSSI2_OFFSET_ALNAGAIN2_5G_READ in include/chip/rt3593.h Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23rt2x00: rt2800lib: fix default TX power values for RT3593Gabor Juhos1-0/+7
The TX power values in the EEPROM are using a different format for the RT3593 chip. The default TX power value uses bits 0..4 only. Bits 5..8 contains value for fine grained power control. Additionally, the lower and upper limits of the TX power values are the same for both bands. Improve the rt2800_txpower_to_dev function, in order to compute the correct default power values for the RT3593 chip as well. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23rt2x00: rt2800lib: add rt2800_txpower_to_dev helperGabor Juhos1-6/+0
Introduce a new helper function for converting the default TX power values from EEPROM into mac80211 values. The change improves the readability and it makes it easier to add support for other chipsets. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23rt2x00: rt2800lib: add TX power configuration for RT3593Gabor Juhos1-0/+116
Based on the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629 driver. References: RTMPReadTxPwrPerRateExt in chips/rt3593.c RT3593_AsicGetTxPowerOffset in chips/rt3593.c Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23rt2x00: rt2800lib: add RFCSR register initialization for RT3593Gabor Juhos1-0/+10
Based on the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629 driver. References: NICInitRT3593RFRegisters in chips/rt3593.c RT3593LoadRFNormalModeSetup in chips/rt3593.c Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23rt2x00: rt2800lib: add MAC register initialization for RT3593Gabor Juhos1-0/+1
Based on the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629 driver. Reference: NICInitRT3593MacRegisters in chips/rt3593.c Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23rt2x00: rt2800lib: add EEPROM map for the RT3593 chipsetGabor Juhos1-0/+6
Three-chain devices are using a different EEPROM layout than the rest of the chipsets. Add a new map which describes the new layout and use that for the RT3593 chipset. The index values has been computed from the EEPROM_EXT_* defines, which can be found in the 'include/chip/rt3593.h' file in the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629 driver. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23rt2x00: rt2800lib: introduce rt2800_eeprom_word_index helperGabor Juhos1-37/+39
Instead of assign the offset value to the enum directly use a new helper function to convert a rt2800_eeprom_word enum into an index of the rt2x00_dev->eeprom array. The patch does not change the existing behaviour, but makes it possible to add support for three-chain devices which are using a different EEPROM layout. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23rt2x00: rt2800lib: introduce rt2800_eeprom_word enumGabor Juhos1-40/+39
The patch converts the EEPROM_* word address defines into new enum values. The new enum type will be used by new functions which will be introduced in subsequent changes. The patch contains no functional changes. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27rt2x00: rt2800: increase EEPROM_SIZE to 512 bytesGabor Juhos1-1/+1
Ralink 3T chipsets are using a different EEPROM layout than the others. The EEPROM on these devices contain more data than the others which does not fit into 272 byte which the rt2800 driver actually uses. The Ralink reference driver defines EEPROM_SIZE to 512/1024 bytes for PCI/USB devices respectively. Increase the EEPROM_SIZE constant to 512 bytes, in order to make room for EEPROM data of 3T devices. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24rt2x00: rt2800: unify [RT]XWI_SIZE definesGabor Juhos1-4/+6
Use common names instead of chip specific ones. The patch contains no functional changes, but it makes it easier to add support for further descriptor sizes. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-19rt2800: 5592: TXWI & RXWI descriptors sizeStanislaw Gruszka1-0/+2
Based on: TXWI_STRUC RXWI_STRUC from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/include/chip/rtmp_mac.h Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-19rt2800: add write_with_rx_chain functionStanislaw Gruszka1-0/+3
Based on: AsicBBPWriteWithRxChain() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rtmp_chip.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-19rt2800: 5592: add iq calibrationStanislaw Gruszka1-0/+55
Based on: GetIQCalibration() IQCalibration() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rtmp_chip.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-19rt2800: 5592: BBP registers initializationStanislaw Gruszka1-4/+20
Based on: NICInitRT5592BbpRegisters() NICInitBBP() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c DPO_RT5572_LinuxSTA_2.6.1.3_20121022/common/rtmp_init.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-19rt2800: 5592: channel config stubStanislaw Gruszka1-0/+11
Based on: RT5592_ChipSwitchChannel() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-19rt2800: 5592: add channels tableStanislaw Gruszka1-0/+6
Based on: RT5592_ChipSwitchChannel() RT5592_Frequency_Plan_Xtal20M[] RT5592_Frequency_Plan_Xtal40M[] from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-19rt2800: 5592: early definesStanislaw Gruszka1-0/+2
Add basic defines for 5592 chip. It can not be enabled until CONFIG_RT2800USB_RT55XX configuration option will be provided in the Kconfig. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-03rt2x00: rt2800lib: introduce RFCSR3_VCOCAL_ENGabor Juhos1-0/+2
On the RF3290,RF5360,RF5370,RF5372,RF5390,RF5392 radio frontends, the VCO calibration can be controlled via the RFCSR3 register. The current code uses the RFCSR30_RF_CALIBRATION constant to enable the calibration, however that belongs to the RFCSR30 register. Although the values of the constant is correct, but using that for another register is confusing. Add a new definition for the VCO calibration enable bit of the RFCSR3 register and use that in the relevant places in order to avoid confusions. The patch contains no functional changes. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-03rt2x00: rt2800lib: remove trailing semicolons from RFCSR3_* definesGabor Juhos1-2/+2
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11rt2x00: add MediaTek/RaLink Rt3352 WiSoCDaniel Golle1-0/+5
Support for the RT3352 WiSoC was developed for and tested with the ALL5002 devboard running OpenWrt. For now, this supports only devices with internal TXALC. Corrections were made according to the remarks of Stanislaw Gruszka and Gertjan van Wingerde, thank you guys for reviewing! Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07rt2x00: Unify GPIO register field namingsGertjan van Wingerde1-26/+27
The various rt2x00 drivers use different methods to name the different GPIO register fields indicating the GPIO pin value and the fields indicating the direction. Start using a unified naming scheme for the GPIO register fields: - <csr>_VAL<x> for fields indicating the GPIO pin value. - <csr>_DIR<x> for fields indicating the GPIO pin direction. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo Van Doorn <ivdoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07rt2x00: Align GPIO register definitions with the datasheets.Gertjan van Wingerde1-0/+6
Ensure that all active GPIO pins are included in the GPIO register definitions, nothing more and nothing less. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo Van Doorn <ivdoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-20rt2x00 : RT3290 chip support v4Woody Hung1-1/+172
This patch support the new chipset rt3290 wifi implementation in rt2x00. It initailize the related mac, bbp and rf register in startup phase. And this patch modify the efuse read/write method for the different efuse data offset of rt3290. Signed-off-by: Woody Hung <Woody.Hung@mediatek.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-06rt2x00:Add RT5392 chipset supportZero.Lin1-0/+6
Signed-off-by: Zero.Lin <Zero.Lin@mediatek.com> Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05rt2x00: Add support for RT5360 based PCI devices.villacis@palosanto.com1-0/+2
This chip is used at least by the D-Link DWA-525 adapter. Signed-off-by: Alex Villac<ED>s Lasso <a_villacis@palosanto.com> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-09rt2x00: Add debugfs access for rfcsr registerAnisse Astier1-0/+2
RFCSR is only used in rt2800. For other chipsets, the debug struct for rfcsr should be zeroed, which isn't be an issue, since the code can now cope with that. Signed-off-by: Anisse Astier <anisse@astier.eu> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-23rt2800: add chipset revision RT5390R supportAnisse Astier1-0/+1
About 70% of the chips with revision RT5390R initialize incorrectly, using the auxiliary antenna instead of the main one. The net result is that signal reception is very poor (no AP further than 1M). This chipset differs from RT5390 and RT5390F by its support of hardware antenna diversity. Therefore antenna selection should be done differently, by disabling software features and previously selected antenna. This changeset does just that, and makes all RT5390R work properly. This is based on Ralink's 2012_03_22_RT5572_Linux_STA_v2.6.0.0_DPO driver. Signed-off-by: Anisse Astier <anisse@astier.eu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-23rt2800: debugfs register access: BBP is 256 bytes bigAnisse Astier1-1/+1
We're already using BBP for values > 128. Make that explicit and allow debugfs access. Signed-off-by: Anisse Astier <anisse@astier.eu> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12rt2x00: Fix beacon skew in rt2800pciHelmut Schaa1-0/+7
rt2800pci is suffering from beacon skew in AP mode. Some powersaving clients (like VOIP phones) are getting into trouble after some time when the beacon skew is getting too big. The ralink legacy drivers contain a function that indicates that the beacon timer is off by 1us per tbtt. And this function works around that by reducing the beacon interval for every 64th beacon transmission by 64us (the smallest possible value). Do the same in rt2800pci. This allows proper powersaving when rt2800pci is used in AP mode. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27rt2800: Add documentation on MCU requestsJakub Kicinski1-1/+14
Add documentation on MCU communication, some of known commands and their arguments. Supplement command ids. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27rt2x00:Add RT5372 chipset supportJohn Li1-0/+1
Signed-off-by: John Li <chen-yang.li@mediatek.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27rt2x00:Add VCO recalibrationJohn Li1-0/+9
Signed-off-by: John Li <chen-yang.li@mediatek.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-09rt2x00: Correctly set txmixer_gain in RT3572 channel switching.Gertjan van Wingerde1-0/+13
Align with the v2.5.0.0 Ralink RT3572 driver. Save the EEPROM txmixer_gain values inside the rt2800 driver data structure and use it throughout the code. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-09rt2x00: Fix RT3572 channel switch RFCSR 7 programming.Gertjan van Wingerde1-4/+6
Align with the v2.5.0.0 Ralink RT3572 driver. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-09rt2x00: Use saved BBP 25 and 26 values when configuring channel on RT3572.Gertjan van Wingerde1-0/+2
This brings the rt2800 channel switching code for RT3572 closer to the v2.5.0.0 Ralink RT3572 driver. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-09rt2x00: Use struct rt2x00_dev driver data in rt2800{pci,usb}.Gertjan van Wingerde1-0/+8
Start using the struct rt2x00_dev driver data in rt2800 for the calibration data. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06rt2800: document RF_R03 register bits [7:4]Stanislaw Gruszka1-0/+3
Taken from: 2011_0719_RT3070_RT3370_RT5370_RT5372_Linux_STA_V2.5.0.3_DPO (based on function RT33xx_ChipSwitchChannel) Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-23 17:05:25 +0300