summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/rt2x00/rt2800.h
AgeCommit message (Collapse)AuthorFilesLines
2010-11-15rt2x00: Add watchdog functions for HW queueIvo van Doorn1-2/+14
Add watchdog functions for managing the Queues inside the hardware. Normally the driver doesn't have much to do with these queues directly, but the Ralink drivers did implement watchdog functions for these. These watchdog functions are not triggered that often, compared to the other watchdog functions, but I have at least seen them trigger once or twice during a long stresstest run. v2: Add extra documentation for register fields Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-15rt2x00: checkpatch.pl error fixes for rt2800.hMark Einon1-11/+11
rt2800.h:1511: ERROR: space prohibited after that open parenthesis '(' rt2800.h:1511: ERROR: space prohibited before that close parenthesis ')' rt2800.h:1513: ERROR: space prohibited after that open parenthesis '(' rt2800.h:1513: ERROR: space prohibited before that close parenthesis ')' rt2800.h:1515: ERROR: space prohibited after that open parenthesis '(' rt2800.h:1515: ERROR: space prohibited before that close parenthesis ')' rt2800.h:1517: ERROR: space prohibited after that open parenthesis '(' rt2800.h:1517: ERROR: space prohibited before that close parenthesis ')' rt2800.h:1519: ERROR: space prohibited after that open parenthesis '(' rt2800.h:1519: ERROR: space prohibited before that close parenthesis ')' rt2800.h:1521: ERROR: space prohibited after that open parenthesis '(' rt2800.h:1521: ERROR: space prohibited before that close parenthesis ')' rt2800.h:1661: ERROR: space prohibited after that open parenthesis '(' rt2800.h:1661: ERROR: space prohibited before that close parenthesis ')' rt2800.h:1662: ERROR: space prohibited after that open parenthesis '(' rt2800.h:1662: ERROR: space prohibited before that close parenthesis ')' rt2800.h:1663: ERROR: space prohibited before that close parenthesis ')' rt2800.h:2013: ERROR: space prohibited after that open parenthesis '(' rt2800.h:2013: ERROR: space prohibited before that close parenthesis ')' rt2800.h:2014: ERROR: space prohibited after that open parenthesis '(' rt2800.h:2014: ERROR: space prohibited before that close parenthesis ')' Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-15rt2x00: Add TXOP_CTRL_CFG register definitionHelmut Schaa1-0/+23
Remove the magic value initialisation of the TXOP_CTRL_CFG register by defining its fields and using them during intialisation. The field RESERVED_TRUN_EN is referred to as reserved, however it is set to 1 by the legacy drivers. Hence, do the same. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05rt2x00: Update comment about the AMPDU flag in the TXWIHelmut Schaa1-1/+7
During testing with AMPDUs it turned out that the rt2800 hw will aggregate consecutive frames with the same RA and TID when the first frame in a possible aggregate has set AMPDU=1 in the TXWI. If a following frame has set AMPDU=0 in its TXWI it might sill end up in the aggregate of the previous frame. Update the comment accordingly. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05rt2x00: Improve TX status entry validationIvo van Doorn1-1/+13
The TX_STA_FIFO contains some information for identifying a outgoing frame, however matching by WCID and ACK status is not sufficient to 100% identify the macthing queue_entry structure (containing the SKB buffer) which belongs to the status report. Within TX_STA_FIFO we have a 4-bit field named PACKETID, which is currently used to encode the queue id. The queue ID is however limited to values from 0 to 3, which means 2 bits are sufficient to encode the value. With the remaining 2 bits we can encode a partial queue_entry index number. The value of PACKETID is not allowed to become 0, with the queue ID ranging from 0 to 3, at least one of the bits for the entry identification must be 1. That leaves us with 3 possible values we can still encode in the bits. Altough this doesn't allow 100% accurate matching of the TX_STA_FIFO queue to a queue_entry structure, it at least improves the accuracy. This allows us to better detect if we have missed the TX_STA_FIFO report, which in turn reduces the number of watchdog warnings regarding the TX status timeout. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05rt2x00: add field definitions for the TBTT_SYNC_CFG registerHelmut Schaa1-0/+6
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05rt2x00: Add register definition for busy time on secondary channelHelmut Schaa1-2/+7
Add the register definition CH_BUSY_STA_SEC for reading the busy time on the secondary channel in HT40 mode. Also update the comments about channel busy/idle time registers to express the used unit. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05rt2x00: Allow tx duplication for legacy rates in HT40 modeHelmut Schaa1-1/+2
Make use of the IEEE80211_TX_RC_DUP_DATA flag to duplicate a transmission with legacy rates to both 20Mhz channels if set. Also update the related comment in rt2800.h to describe the behavior of the BW_40 flag for legacy rates. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05rt2x00: Don't overwrite beacon buffers in pairwise key setupHelmut Schaa1-1/+20
rt2800 devices use parts of the pariwise key table to store the beacon frames for beacon 6 and 7. To not overwrite the beacon frame buffers limit the number of entries we store in the pairwise key table to 222. Also add some descriptive comments about this shared memory usage. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-15rt2x00: Initialize AMPDU_BA_WINSIZE registerHelmut Schaa1-0/+12
Since we're not using the AMPDU_BA_WINSIZE register to force the BlockAck window size (we specify it in every TXWI) we should initialize it to 0. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-31rt2x00: Update rt2800 comments regarding AMPDU and PACKET_ID in TXWIHelmut Schaa1-1/+5
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-25rt2x00: Fix max TX power settingsIvo van Doorn1-0/+7
During initialization each driver reads the default TX power for each individual channel. However mac80211 only accepts the maximum value (which is also handled as default value). As a result, the TX power of the device was being limited to the default value, which is often quite low compared to the real maximum acceptable value. This patch allows each driver to set the maximum value on a per-channel basis which is forwarded to mac80211. The default value will be preserved for now, in case we want to update mac80211 to differentiate between the maximum and default txpower. This fixes bug complaining about limited TX power values like: https://bugzilla.kernel.org/show_bug.cgi?id=16358 Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-16rt2x00: Update comments regarding TXWI and TX_STA_FIFOHelmut Schaa1-1/+26
Add some comments about the TXWI fields and the TX_STA_FIFO register. Especially describe the relationship between the TXWI field PACKETID and the PID field in the TX_STA_FIFO register. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-13Merge branch 'master' of ↵John W. Linville1-3/+27
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/wl12xx/wl1271_cmd.h
2010-07-13rt2x00: Use pretbtt irq for fetching beacons on rt2800pciHelmut Schaa1-1/+7
Updating the beacon on pre tbtt instead of beacondone allows much lower latency in regard to TIM updates. Hence, use the pre tbtt interrupt for updating the beacon in rt2800pci (older devices don't provide a pre tbtt interrupt). Also, add a new driver flag to indicate if a driver has pre tbtt support or not and implement the according behavior in rt2x00lib. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-13rt2x00: Convert AGC value from descriptor to RSSI (dBm)Ivo van Doorn1-1/+1
The RSSI values in the RXWI descriptor aren't true RSSI values. Instead they are more like the AGC values similar to rt61pci. And as such, it needs the same conversion before it can be passed to rt2x00lib/mac80211. This requires the struct queue_entry to be passed to rt2800_process_rxwi rather then the skb structure which is contained in the queue_entry. This is required to obtain the lna_gain information from the rt2x00_dev structure. This fixes connection problems when using wpa_supplicant which would try to connect to the worst AP's rather then the best ones. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-13rt2x00: Limit txpower by eeprom valuesHelmut Schaa1-1/+19
Limit the txpower per rate by the approriate values in the eeprom. This avoids too high txpower values resulting in bad tx performance. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-18Merge branch 'master' of ↵David S. Miller1-1/+7
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-06-16rt2x00: Synchronize WCID initialization with legacy driverIvo van Doorn1-0/+4
Legacy rt2870 driver handles WCID differently then we expected, the BSSID and Cipher value are 3 bit values, while the 4th bit should be set elsewhere in an extended field. After this, rt2800usb reports frames have been decrypted successfully, indicating that the Hardware decryption now is working correctly. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16rt2x00: Add comment about BBP1_TX_POWERHelmut Schaa1-1/+3
Add a comment about the meaning of BBP1_TX_POWER stating all possible values. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-11Merge branch 'master' of ↵David S. Miller1-1/+48
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: drivers/net/wireless/wl12xx/wl1271.h drivers/net/wireless/wl12xx/wl1271_cmd.h
2010-06-03drivers/net: use __packed annotationEric Dumazet1-3/+3
cleanup patch. Use new __packed annotation in drivers/net/ Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-03rt2x00: Move all register definitions for rt2800 to rt2800.h.Gertjan van Wingerde1-0/+48
There is no point on having them separated across 3 files. At the same time rename USB_CYC_CFG to its proper name US_CYC_CNT (as per the datasheet). Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-06-03rt2x00: Remove RT2870 chipset identification.Gertjan van Wingerde1-1/+0
There is no evidence, either in adapters or in the Ralink code, that such a device actually exists. All so-call RT2870 adapter identify themselves as RT2860. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-05-04rt2x00: Fix HT40+/HT40- setting in rt2800.Gertjan van Wingerde1-2/+2
Inspection of the Ralink vendor driver shows that the TX_BAND_CFG register and BBP register 3 are about HT40- indication, not about HT40+ indication. Inverse the meaning of these fields in the code. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26rt2x00: fix typo in rt2800.hHelmut Schaa1-1/+1
Fix a typo in a comment in rt2800.h. Instead of replacing the wrong hexvalue (0x171c) with the correct one (0x1718) just use the appropriate readable define. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26rt2x00: rt2800: use tx_power2 in rt2800_config_channel_rf3xxxHelmut Schaa1-0/+5
Get closer to what the ralink driver does by setting the rf register 13 to tx_power2 during channel switch. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-12rt2x00: Refactor rt2800 version constants.Gertjan van Wingerde1-7/+11
The rt2800 version constants are inconsistent, and the version number don't mean a lot of things anyway. Refactor the constants to have some more meaningful names, and introduce and use some new helpers to check these chipset revisions. At the same time rename to revision, as they are more revision numbers rather than version numbers. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-12rt2x00: Align RT chipset definitions with vendor driver.Gertjan van Wingerde1-3/+40
Only include definitions for RT chipsets that are also used inside the Ralink vendor drivers. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-12rt2x00: Update rt2800 register definitions towards latest definitions.Gertjan van Wingerde1-2/+53
Definitions taken from the latest rt2860 / rt2870 / rt3070 / rt3090 Ralink vendor drivers. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-16rt2x00: rework RT chipset and revision determination for PCI an SOC devices.Gertjan van Wingerde1-7/+7
The recent rt2800 devices are no longer really identified by their PCI ID's, but rather by the contents of their CSR0 register. Also for the other chipsets is the contents of this CSR0 register important. Change the chipset determination logic to be more aligned with the rt2800 model. Preparation for the support of rt3070 / rt3090 based devices. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21rt2x00: Fix calculation of rt2800 iveiv entry offset.Gertjan van Wingerde1-1/+1
Fix typo. The index should be multiplied by the entry size, not 'and'-ed. Found via code-inspection. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-12rt2x00: Update copyright statements.Gertjan van Wingerde1-1/+8
As mentioned on the linux-wireless mailing list, the current copyright statements in the rt2x00 are meaningless, as the rt2x00 project is not even a formal legal entity. Therefore it is better to replace the existing copyright statements with copyright statements for the people that actually wrote the code. Note: Updated to the best of my knowledge with respect to who contributed considerable amounts of code. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> CC: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-12rt2800: add eFuse EEPROM support code to rt2800libBartlomiej Zolnierkiewicz1-0/+29
eFuse EEPROM is used also by USB chips (i.e. RT3070) so move the needed code from rt2800pci to rt2800lib. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-07rt2800: fix comments in rt2800.hBartlomiej Zolnierkiewicz1-12/+9
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-07rt2800: fix duplication in header filesBartlomiej Zolnierkiewicz1-0/+1819
Updated debugging scripts are located here: http://www.kernel.org/pub/linux/kernel/people/bart/rt2800/scripts/ (they also work fine with older drivers) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-15 17:23:57 +0300