summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/rsi
AgeCommit message (Collapse)AuthorFilesLines
2017-09-21drivers: net: rsi_91x: use setup_timer() helper.Allen Pais1-3/+2
Use setup_timer function instead of initializing timer with the function and data fields. Signed-off-by: Allen Pais <allen.lkml@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20rsi: fix a dereference on adapter before it has been null checkedColin Ian King1-2/+2
The assignment of dev is dereferencing adapter before adapter has been null checked, potentially leading to a null pointer dereference. Fix this by simply moving the assignment of dev to a later point after the sanity null check of adapter. Detected by CoverityScan CID#1398383 ("Dereference before null check") Fixes: dad0d04fa7ba ("rsi: Add RS9113 wireless driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-20rsi: miscellaneous changes for p2p modePrameela Rani Garnepudi2-9/+12
Add P2P_GO condition as well when handling BEACON_ENABLE from mac80211. Also passing 'vif' for auto rate request. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-20rsi: aggregation changes for p2p modePrameela Rani Garnepudi1-5/+10
P2P Go condition is added wherever AP mode is there in aggregation path. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-20rsi: disallow power save config when AP vap runningPrameela Rani Garnepudi5-23/+39
When AP or P2P GO VAP is running, power save configuration should be disallowed. To check interface type in power save configuration 'vif' parameters is passed. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-20rsi: tx and rx path enhancements for p2p modePrameela Rani Garnepudi5-17/+48
Data descriptor is updated to include vap_id. TX command frame key config also updated to include vap_id. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-20rsi: handle peer connection and disconnection in p2p modePrameela Rani Garnepudi7-39/+64
Parameter 'vif' is passed to inform_bss_status function to check the type of vif and to get vap_id. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-20rsi: add support for p2p listenPrameela Rani Garnepudi7-25/+199
Remain-on-channel and cancel-remain-on-channel are implemented to support p2p listen phase. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-20rsi: add/remove interface enhancements for p2pPrameela Rani Garnepudi4-55/+89
STA_OPMODE and AP_OPMODE macros are renamed to RSI_OPMODE_STA and RSI_OPMODE_AP. New opmodes are added to this list for P2P support. Mapping of mac80211 interface types to rsi interface types are added. Add and remove interface callbacks are handled for P2P mode. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-20rsi: add p2p support parameters to mac80211Prameela Rani Garnepudi1-1/+36
This patch adds p2p supported parameters to mac80211 hw and wiphy structures during mac80211 registration. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-30rsi: remove memset before memcpyHimanshu Jha2-2/+0
calling memcpy immediately after memset with the same region of memory makes memset redundant. Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-30rsi: missing unlocks on error pathsDan Carpenter1-5/+10
There is a missing unlock if rsi_find_sta() fails in rsi_mac80211_ampdu_action() or if we hit the -EINVAL path in rsi_mac80211_sta_add(). Fixes: 3528608f3a79 ("rsi: handle station connection in AP mode") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-30rsi: update some commentsDan Carpenter1-5/+5
These functions don't return -1 on failure. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-24net: rsi: mac80211: constify ieee80211_opsArvind Yadav1-1/+1
ieee80211_ops are not supposed to change at runtime. All functions working with ieee80211_ops provided by <net/mac80211.h> work with const ieee80211_ops. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-17rsi: security enhancements for AP modePrameela Rani Garnepudi4-18/+56
Station id should be set in load key frame configured to device. For WEP mode, key is configured once from mac80211. This key is saved and configured to device every time a station is connected. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-17rsi: aggregation parameters frame for AP modePrameela Rani Garnepudi3-13/+39
TX command frame ampdu aggregation parameters is updated to include sta_id for AP mode. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-17rsi: update tx auto rate command frame for AP modePrameela Rani Garnepudi1-10/+34
Auto rate frame is sent to firmware when a new station is connected. Station id and station's ht capabilities are updated in auto rate command frame. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-17rsi: use common descriptor for auto rate framePrameela Rani Garnepudi2-12/+8
TX command frame auto rate request is modified to use common descriptor struture. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-17rsi: data and managemet path changes for AP modePrameela Rani Garnepudi5-27/+96
Station id needs to be get for data and management frames to fill in the descruptor for AP mode. Few other changes related to AP mode are covered here. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-17rsi: handle station disconnection in AP modePrameela Rani Garnepudi1-11/+45
When sta_remove of mac80211 is called, driver iterates through list of existing stations to get the station id. Then peer notify is prepared and send to firmare. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-17rsi: handle station connection in AP modePrameela Rani Garnepudi3-26/+110
Station structures are maintained in driver with required fields. When mac80211 callback sta_add is called, driver iterates through list of connected stations to check available index and assigns station id which is important for further communication to that station. Then peer notify frame is send to firmware to inform the firmware about new station connection. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-17rsi: add beacon changes for AP modePrameela Rani Garnepudi7-14/+152
Mac80211 config parameter BEACON_ENABLE is handled. When VAP capabilities frame with AP mode is configured to firmware, beacon events start coming to host at each PreTBTT. At this time, beacon is taken from mac80211, descriptor is prepared and send to firmware. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-17rsi: remove interface changes for AP modePrameela Rani Garnepudi1-4/+22
remove_interface callback of mac80211 is handled for AP mode. Same is notified to firmware through vap_capabilities frame with VAP status VAP_DELETE. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-17rsi: add interface changes for ap modePrameela Rani Garnepudi4-13/+44
AP mode is handled in add_interface callback of mac80211. Also for AP mode, sending rx filter frame to disallow beacons to host is added. Station structures are initialized to NULL. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-17rsi: advertise ap mode supportPrameela Rani Garnepudi2-1/+37
AP mode support is advertised to cfg80211. Necessary wiphy parameters are initialized. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rsi: RTS threshold configurationKarun Eagalapati4-0/+55
Provision is added for configuring RTS threshold by sending vap dynamic update frame to firmware. Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rsi: buffer available interrupt handlingKarun Eagalapati1-5/+6
BUFFER_AVAILABLE interrupt is sent by firmware to indicate change in buffer status. We should check buffer status while handling this interrupt. Currently buffer status is checked only while dequeueing packets. This patch fixes a data traffic stuck problem observed occasionally. Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rsi: buffer full check optimizationKarun Eagalapati2-1/+16
We get buffer full event from firmware whenever Tx queue is full Host should stop writing packets after this and resume after buffer free event. Buffer status checking is optimized for once in 4 times if BUFF_FULL condition is not set, otherwise once for every packet. Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rsi: rename sdio_read_buffer_status_registerKarun Eagalapati3-12/+5
rsi_sdio_check_buffer_status would be the appropriate name for this function as we are checking hardware buffers availability status. Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rsi: add support for U-APSD power saveKarun Eagalapati5-0/+46
This patch adds support for U-APSD power save. Configuration frame is downloaded to firmware with default settings and support is advertised to mac80211 Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rsi: add support for legacy power saveKarun Eagalapati9-3/+309
This patch adds support for legacy power save. Necessary configuration frames are downloaded to firmware when power save is enabled/disabled Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rsi: update set_antenna command framePavani Muthyala2-6/+18
TX command frame set_antenna is modified to use common descriptor structure. Also it's subframe type is set. Signed-off-by: Pavani Muthyala <pavani.muthyala@redpinesignals.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rsi: add support for rf-kill functionalityPavani Muthyala1-2/+19
This patch implements rfkill_poll handler. Also, necessary changes are done in interface up and down handler to support rfkill functionality. Signed-off-by: Pavani Muthyala <pavani.muthyala@redpinesignals.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rsi: fix uninitialized descriptor pointer issuePrameela Rani Garnepudi1-0/+1
This patch fixes the uninitialized descriptor pointer issue in function rsi_send_internal_mgmt_frame(). Descriptor should point to start of the skb data. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 9a629fafe7d8 ("rsi: immediate wakeup bit and priority for TX command packets") Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: fix static checker warningAmitkumar Karwar1-1/+8
u32 pointer is changed to u16 and filled the value. Problem is solved by using local temporary variable. Below static checker warning was reported. drivers/net/wireless/rsi/rsi_91x_usb.c:400 rsi_usb_master_reg_read() warn: passing casted pointer 'value' to 'rsi_usb_reg_read()' 32 vs 16. Fixes: b97e9b94ad75c ("rsi: Add new host interface operations") Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: check length before USB read/write registerAmitkumar Karwar1-0/+6
These checks are required. Otherwise we may end up getting memory corruption if invalid length is passed. Fixes: b97e9b94ad75c ("rsi: Add new host interface operations") Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: use macro for allocating USB bufferAmitkumar Karwar2-2/+3
4 bytes is fixed size for reading or writing USB register. We will use a macro instead of hardcoding this. Fixes: b97e9b94ad75c ("rsi: Add new host interface operations") Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: regulatory enhancementsPrameela Rani Garnepudi2-12/+45
Below regulatory changes are included this patch * Country code is saved as it will be used in bgscan. * Region codes are mapped according to RSI region codes. * Radar flag settings are moved under the check if 5GHZ band is enabled. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: Send rx filter frame to device when interface is downPrameela Rani Garnepudi1-0/+4
When interface is down it is better to stop all RX packets to host. 0xffff will block all packets to host. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: Remove internal header from Tx status skbPrameela Rani Garnepudi1-1/+9
Device specific descriptor for each TX packet is prepared on top of skb data address. This descriptor should be pulled out before indicating the TX status to mac80211. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: update tx command frame block/unblock dataPrameela Rani Garnepudi2-7/+22
TX command frame block/unblock data is modified to use common descriptor structure. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: block/unblock data queues as per connection statusPrameela Rani Garnepudi1-0/+5
Data queues should be unblocked after station add notify frame is sent and should be blocked after station delete notify is sent. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: update autorate request command framePrameela Rani Garnepudi1-0/+3
When Short Gaurd Interval is enabled bit 9 is set in rate. Otherwise it should not be set. Added missing 'else' case in this patch. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: set_key enhancementsPrameela Rani Garnepudi1-13/+15
Broadcast bit to be set for broadcast and multicast packets. For remove_key, tx and rx mic need not be filled. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: update set_key command framePrameela Rani Garnepudi2-14/+28
TX command frame set_key is modified to use common descriptor structure. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: update vap capabilities command framePrameela Rani Garnepudi3-29/+49
VAP capablities frame configured to device is modified to use common descriptor structure. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: update set_channel command framePrameela Rani Garnepudi2-25/+35
TX command frame set_channel is modified to use common descriptor structure. Also DFS channel indication to firmware is added in the descriptor for dfs channels configuration. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: Update baseband RF programming framePrameela Rani Garnepudi2-11/+25
Baseband RF programming frame configured to device is modified to use common descriptor structure. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: Update aggregation parameters command framePrameela Rani Garnepudi2-24/+31
AMPDU aggregation parameters frame configured to device is modified to use common descriptor structure. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: Update peer notify command framePrameela Rani Garnepudi2-10/+13
TX command frame peer notify is updated to use common descriptor structure. MPDU density value added to the frame. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 02:23:59 +0300