summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/realtek/rtw88/pci.c
AgeCommit message (Collapse)AuthorFilesLines
2022-05-02rtw88: remove a copy of the NAPI_POLL_WEIGHT defineJakub Kicinski1-1/+1
Defining local versions of NAPI_POLL_WEIGHT with the same values in the drivers just makes refactoring harder. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220429174643.196994-2-kuba@kernel.org
2022-04-23rtw88: pci: 8821c: Disable 21ce completion timeoutPo-Hao Huang1-0/+12
Disable this capability to avoid timeout errors on certain platforms. Without it, pci bus might stuck and leads to disconnection. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Chris Chiu <chris.chiu@canonical.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220420093058.31646-2-pkshih@realtek.com
2022-04-12rtw88: 8821ce: Disable PCIe ASPM L1 for 8821CE using chip IDJimmy Hon1-1/+1
Make workaround work for other 8821CE devices with different PCI ID Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220407075123.420696-3-honyuenkwun@gmail.com
2022-04-12rtw88: Add update beacon flow for AP modePo-Hao Huang1-0/+3
To support stations in power saving mode, AP should notify stations that there are frames buffered at the AP via TIM during beacons. Driver used to transmit identical beacons that were downloaded to hardware during the initiation phase. This beacon will become obsolete over time. If the beacon does not contain sufficient information, station would not be able to percept that there is data to receive. Hence it won't wake up and start the PS-poll procedure, this could lead to timeout and/or lost data segments. In order to resolve this issue, driver will now download beacon to hardware whenever the content is updated. Enable hardware to update dtim_count for more efficiency, this reduces the overhead of downloading beacon at every beacon interval since most of the time only the dtim_count needs to be updated. Change queue mapping for broadcast/multicast frames to high queue, so these frames can be prioritized and sent when dtim_count is zero. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220407095858.46807-4-pkshih@realtek.com
2021-12-22rtw88: don't consider deep PS mode when transmitting packetChin-Yen Lee1-2/+6
In original flow, driver needs to ensure chip leave deep ps mode before transmitting any packet, and don't enter deep ps mode beofre PCIE DMA is finished. Now with the support of 8822ce's hardware setting and firmware after v9.9.11, these limits are removed. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211221020230.20764-1-pkshih@realtek.com
2021-12-20rtw88: Disable PCIe ASPM while doing NAPI poll on 8821CEKai-Heng Feng1-51/+19
Many Intel based platforms face system random freeze after commit 9e2fd29864c5 ("rtw88: add napi support"). The commit itself shouldn't be the culprit. My guess is that the 8821CE only leaves ASPM L1 for a short period when IRQ is raised. Since IRQ is masked during NAPI polling, the PCIe link stays at L1 and makes RX DMA extremely slow. Eventually the RX ring becomes messed up: [ 1133.194697] rtw_8821ce 0000:02:00.0: pci bus timeout, check dma status Since the 8821CE hardware may fail to leave ASPM L1, manually do it in the driver to resolve the issue. Fixes: 9e2fd29864c5 ("rtw88: add napi support") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215131 BugLink: https://bugs.launchpad.net/bugs/1927808 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Jian-Hong Pan <jhp@endlessos.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211215114635.333767-1-kai.heng.feng@canonical.com
2021-11-26rtw88: add quirk to disable pci caps on HP 250 G7 Notebook PCPing-Ke Shih1-0/+9
8821CE causes random freezes on HP 250 G7 Notebook PC. Add a quirk to disable pci ASPM capability. Reported-by: rtl8821cerfe2 <rtl8821cerfe2@protonmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211119052437.8671-1-pkshih@realtek.com
2021-08-29rtw88: add quirk to disable pci caps on HP Pavilion 14-ce0xxxUgo Rémery1-0/+9
8821CE causes random freezes on HP Pavilion 14-ce0019nf. Add a quirk to disable pci ASPM capability. Signed-off-by: Ugo Rémery <ugo.remery@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210822194932.29630-1-Larry.Finger@lwfinger.net
2021-08-21rtw88: Remove unnecessary check codeLen Baker1-5/+0
The rtw_pci_init_rx_ring function is only ever called with a fixed constant or RTK_MAX_RX_DESC_NUM for the "len" argument. Since this constant is defined as 512, the "if (len > TRX_BD_IDX_MASK)" check can never happen (TRX_BD_IDX_MASK is defined as GENMASK(11, 0) or in other words as 4095). So, remove this check. The true motivation for this patch is to silence a false Coverity warning. Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Len Baker <len.baker@gmx.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210731163546.10753-1-len.baker@gmx.com
2021-08-21rtw88: 8822ce: set CLKREQ# signal to low during suspendChin-Yen Lee1-0/+33
We find the power sequence of system suspend flow don't meet the criteria when using 8822CE-VR chip by rfe-type 6, because the reference clock form host is sometimes late. To avoid the behavoir, we keep CLKREQ# signal to low during suspend to make sure the reference clock arrival in time. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210727100503.31626-1-pkshih@realtek.com
2021-06-22rtw88: add quirks to disable pci capabilitiesPing-Ke Shih1-0/+32
8821CE with ASPM cannot work properly on Protempo Ltd L116HTN6SPW. Add a quirk to disable the cap. The reporter describes the symptom is that this module (driver) causes frequent freezes, randomly but usually within a few minutes of running (thus very soon after boot): screen display remains frozen, no response to either keyboard or mouse input. All I can do is to hold the power button to power off, then reboot. Reported-by: Paul Szabo <psz2036@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210607012254.6306-1-pkshih@realtek.com
2021-04-21rtw88: refine napi deinit flowPo-Hao Huang1-5/+14
We used to stop napi before disabling irqs. And it turns out to cause some problem when we try to stop device while interrupt arrives. To safely stop pci, we do three steps: 1. disable interrupt 2. synchronize_irq 3. stop_napi Since step 2 and 3 may not finish as expected when interrupt is enabled, use rtwpci->running to decide whether interrupt should be re-enabled at the time. Fixes: 9e2fd29864c5 ("rtw88: add napi support") Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210415084703.27255-4-pkshih@realtek.com
2021-04-21rtw88: Fix potential unrecoverable tx queue stopYu-Yen Ting1-2/+8
If there are lots of packets to be transmitted, the driver would check whether the available descriptors are sufficient according the read/write point of tx queue. Once the available descriptor is not enough, ieee80211_stop_queue is called. TX ISR, meanwhile, is releasing the tx resources after the packets are transmitted. This routine may call ieee80211_wake_queue by checking the available descriptor. The potential queue stop problem would occur when the tx queue is stopped due to the heavy traffic. Then thare is no chance to wake the queue up because the read point is not updated immediately, as a result, no more packets coulde be transmitted in this queue. This patch makes sure the ieee80211_wake_queue could be called properly and avoids the race condition when ring->r.rp, ring->queue_stopped are updated. Signed-off-by: Yu-Yen Ting <steventing@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210415084703.27255-3-pkshih@realtek.com
2021-04-11rtw88: add flush hci supportZong-Zhe Yang1-0/+69
Though mac queue flushing has been supported, sometimes data may be waiting on interface from host to chip. If it occurs, there may still be data that flows into mac just after we do flush. To avoid that, we add the hci part of flushing. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210319054218.3319-2-pkshih@realtek.com
2021-02-12rtw88: add napi supportPo-Hao Huang1-23/+131
Use napi to reduce overhead on rx interrupts. Driver used to interrupt kernel for every Rx packet, this could affect both system and network performance. NAPI is a mechanism that uses polling when processing huge amount of traffic, by doing this the number of interrupts can be decreased. Network performance can also benefit from this patch. Since TCP connection is bidirectional and acks are required for every several packets. These ack packets occupie the PCI bus bandwidth and could lead to performance degradation. When napi is used, GRO receive is enabled by default in the mac80211 stack. So mac80211 won't pass every RX TCP packets to the kernel TCP network stack immediately. Instead an aggregated large length TCP packet will be delivered. This reduces the tx acks sent and gains rx performance. After the patch, the Rx throughput increases about 25Mbps in 11ac. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210209070755.23019-4-pkshih@realtek.com
2020-10-01rtw88: pci: Power cycle device during shutdownKai-Heng Feng1-0/+2
There are reports that 8822CE fails to work rtw88 with "failed to read DBI register" error. Also I have a system with 8723DE which freezes the whole system when the rtw88 is probing the device. According to [1], platform firmware may not properly power manage the device during shutdown. I did some expirements and putting the device to D3 can workaround the issue. So let's power cycle the device by putting the device to D3 at shutdown to prevent the issue from happening. [1] https://bugzilla.kernel.org/show_bug.cgi?id=206411#c9 BugLink: https://bugs.launchpad.net/bugs/1872984 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200928165508.20775-1-kai.heng.feng@canonical.com
2020-09-29rtw88: handle and recover when firmware crashTzu-En Huang1-0/+3
This handles the situation when firmware crashes. When firmware crashes, it will send an interrupt, and driver will queue a work for recovery. In the work, driver will reset it's internal association state, which includes removing associated sta's macid, resetting vifs' states and removing keys. After resetting the driver's state, driver will call rtw_enter_ips() to force the chipset power off to reset the chip. Finally, driver calls ieee80211_restart_hw() to inform mac80211 stack to restart. Since only 8822c firmware supports this feature, the interrupt will only be triggered when 8822c chipset is loaded. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200925061219.23754-3-tehuang@realtek.com
2020-08-27rtw88: switch from 'pci_' to 'dma_' APIChristophe JAILLET1-17/+16
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'rtw_pci_init_tx_ring()' and 'rtw_pci_init_rx_ring()' GFP_KERNEL can be used because both functions are called from a probe function and no spinlock is taken. The call chain is: rtw_pci_probe --> rtw_pci_setup_resource --> rtw_pci_init --> rtw_pci_init_trx_ring --> rtw_pci_init_tx_ring --> rtw_pci_init_rx_ring @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200820150643.148219-1-christophe.jaillet@wanadoo.fr
2020-07-15rtw88: pci: disable aspm for platform inter-op with module parameterYan-Hsuan Chuang1-0/+9
Some platforms cannot read the DBI register successfully for the ASPM settings. After the read failed, the bus could be unstable, and the device just became unavailable [1]. For those platforms, the ASPM should be disabled. But as the ASPM can help the driver to save the power consumption in power save mode, the ASPM is still needed. So, add a module parameter for them to disable it, then the device can still work, while others can benefit from the less power consumption that brings by ASPM enabled. [1] https://bugzilla.kernel.org/show_bug.cgi?id=206411 [2] Note that my lenovo T430 is the same. Fixes: 3dff7c6e3749 ("rtw88: allows to enable/disable HCI link PS mechanism") Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200605074703.32726-1-yhchuang@realtek.com
2020-05-18rtw88: extract: remove the unused after extractingZong-Zhe Yang1-15/+0
remove the unused about pci after extracting chip modules Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200515052327.31874-7-yhchuang@realtek.com
2020-05-18rtw88: extract: make 8723d an individual kernel moduleZong-Zhe Yang1-3/+0
Make objects about 8723d functions and 8723d tables, i.e. rtw8723d.o and rtw8723d_table.o, an individual kernel module called rtw88_8723d.ko. For 8723d pcie chip, i.e. 8723DE chip, add a chip entry point module called rtw88_8723de.ko which will depend on rtw88_8723d.ko and rtwpci.ko. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200515052327.31874-6-yhchuang@realtek.com
2020-05-18rtw88: extract: make 8822b an individual kernel moduleZong-Zhe Yang1-3/+0
Make objects about 8822b functions and 8822b tables, i.e. rtw8822b.o and rtw8822b_table.o, an individual kernel module called rtw88_8822b.ko. For 8822b pcie chip, i.e. 8822BE chip, add a chip entry point module called rtw88_8822be.ko which will depend on rtw88_8822b.ko and rtwpci.ko. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200515052327.31874-5-yhchuang@realtek.com
2020-05-18rtw88: extract: make 8822c an individual kernel moduleZong-Zhe Yang1-3/+0
Make objects about 8822c functions and 8822c tables, i.e. rtw8822c.o and rtw8822c_table.o, an individual kernel module called rtw88_8822c.ko. For 8822c pcie chip, i.e. 8822CE chip, add a chip entry point module called rtw88_8822ce.ko which will depend on rtw88_8822c.ko and rtwpci.ko. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200515052327.31874-4-yhchuang@realtek.com
2020-05-18rtw88: extract: export symbols about pci interfaceZong-Zhe Yang1-5/+9
In the current design, chip entry points are built into the pci module. That makes the pci module depend on chips. According to dependence, once the pci module is loaded, kernel will load chip functionalities, including those that may not be currently used. We plan to split chip entry points from the pci module. Thence we export pci symbols that will be used in chip entry point modules. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200515052327.31874-3-yhchuang@realtek.com
2020-05-13rtw88: 8723d: Add shutdown callback to disable BT USB suspendPing-Ke Shih1-0/+17
Without this patch, wifi card can't initialize properly due to BT in USB suspend state. So, we disable BT USB suspend (wakeup) in shutdown callback that is the moment before rebooting. To save BT USB power, we can't do this in 'remove' callback. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200512102621.5148-5-yhchuang@realtek.com
2020-05-07Merge tag 'wireless-drivers-next-2020-05-07' of ↵David S. Miller1-12/+27
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.8 First set of patches for v5.8. Changes all over, ath10k apparently seeing most new features this time. rtw88 also had lots of changes due to preparation for new hardware support. In this pull request there's also a new macro to include/linux/iopoll: read_poll_timeout_atomic(). This is needed by rtw88 for atomic polling. Major changes: ath11k * add debugfs file for testing ADDBA and DELBA * add 802.11 encapsulation offload on hardware support * add htt_peer_stats_reset debugfs file ath10k * enable VHT160 and VHT80+80 modes * enable radar detection in secondary segment * sdio: disable TX complete indication to improve throughput * sdio: decrease power consumption * sdio: add HTT TX bundle support to increase throughput * sdio: add rx bitrate reporting ath9k * improvements to AR9002 calibration logic carl9170 * remove buggy P2P_GO support p54usb * add support for AirVasT USB stick rtw88 * add support for antenna configuration ti wlcore * add support for AES_CMAC cipher iwlwifi * support for a few new FW API versions * new hw configs ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06rtw88: fix an issue about leak system resourcesDejin Zheng1-0/+1
the related system resources were not released when pci_iomap() return error in the rtw_pci_io_mapping() function. add pci_release_regions() to fix it. Fixes: e3037485c68ec1a ("rtw88: new Realtek 802.11ac driver") Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Acked-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200504083442.3033-1-zhengdejin5@gmail.com
2020-04-23rtw88: 8723d: 11N chips don't support H2C queuePing-Ke Shih1-12/+23
H2C queue is used to send command to firmware. Since 8723D doesn't support this queue, this commit check wlan_cpu flag to avoid to set H2C related registers. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200422034607.28747-6-yhchuang@realtek.com
2020-04-21rtw88: 8723d: Add basic chip capabilitiesPing-Ke Shih1-0/+3
RTL8723DE is an 11n 1x1 2.4G single band chip with the following capabilities: - TX/RX BD size: 16/8 - TX/RX desc size: 40/24 - physical/logical/protected efuse size: 512/512/96 - TX gain index factor: 1 - max TX power index: 0x3F - band: 2G - HT: support - VHT: Not support Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200420055054.14592-2-yhchuang@realtek.com
2020-04-14rtw88: avoid unused function warningsArnd Bergmann1-8/+3
The rtw88 driver defines emtpy functions with multiple indirections but gets one of these wrong: drivers/net/wireless/realtek/rtw88/pci.c:1347:12: error: 'rtw_pci_resume' defined but not used [-Werror=unused-function] 1347 | static int rtw_pci_resume(struct device *dev) | ^~~~~~~~~~~~~~ drivers/net/wireless/realtek/rtw88/pci.c:1342:12: error: 'rtw_pci_suspend' defined but not used [-Werror=unused-function] 1342 | static int rtw_pci_suspend(struct device *dev) Better simplify it to rely on the conditional reference in SIMPLE_DEV_PM_OPS(), and mark the functions as __maybe_unused to avoid warning about it. I'm not sure if these are needed at all given that the functions don't do anything, but they were only recently added. Fixes: 44bc17f7f5b3 ("rtw88: support wowlan feature for 8822c") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200408185413.218643-1-arnd@arndb.de
2020-03-23rtw88: kick off TX packets once for higher efficiencyYan-Hsuan Chuang1-25/+67
Driver used to kick off every TX packets, that will waste some time while we can do better to kick off the TX packets once after they are all prepared to be transmitted. For PCI, it uses DMA engine to transfer the SKBs to the device, and the transition of the state of the DMA engine could be a cost. Driver can save some time to kick off multiple SKBs once so that the DMA engine will have only one transition. So, split rtw_hci_ops::tx() to rtw_hci_ops::tx_write() and rtw_hci_ops::tx_kick_off() to explicitly kick the SKBs off after they are written to the prepared buffer. For packets come from ieee80211_ops::tx(), write one and then kick it off immediately. For packets queued in TX queue, which come from ieee80211_ops::wake_tx_queue(), we can dequeue them, write them to the buffer, and then kick them off together. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200312080852.16684-6-yhchuang@realtek.com
2020-03-23rtw88: pci: define a mask for TX/RX BD indexesYan-Hsuan Chuang1-11/+21
Add a macro TRX_BD_IDX_MASK for access the TX/RX BD indexes. The hardware has only 12 bits for TX/RX BD indexes, we should not initialize a TX/RX ring or access the TX/RX BD index with a length that is larger than TRX_BD_IDX_MASK. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200312080852.16684-5-yhchuang@realtek.com
2020-03-23rtw88: extract alloc rsvd_page and h2c skb routinesYan-Hsuan Chuang1-23/+4
Extract skb allocation routines for rsvd_page and h2c. These routines should also be used by USB and SDIO. This should not change the logic at all. memset() for pkt_info is unnecessary, just declare as {0}. Also skb_put()/memcpy() can be replaced by skb_put_data(). Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200312080852.16684-3-yhchuang@realtek.com
2020-03-23rtw88: don't hold all IRQs disabled for PS operationsBrian Norris1-21/+33
This driver generally only needs to ensure that (a) it doesn't try to process TX interrupts at the same time as power-save operations (and similar) (b) the device interrupt gets disabled while we're still handling the last set of interrupts For (a), all the operations (e.g., PS transitions, packet handling) happens in non-atomic contexts (e.g., threaded IRQ). For (b), we only need mutual exclusion for brief sections (i.e., while we're actually manipulating the interrupt mask/status). So, we can introduce a separate lock for handling (b), disabling IRQs while we do it. For (a), we can demote the locking to BH only, now that (b) (the only steps done in atomic context) and that has its own lock. This helps reduce the amount of time this driver spends with IRQs off. Notably, transitioning out of power-save modes can take >3 milliseconds, and this transition is done under the protection of 'irq_lock'. Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200312080852.16684-2-yhchuang@realtek.com
2020-02-12rtw88: 8822[bc]: Make tables const, reduce data object sizeJoe Perches1-1/+1
Reduce the data size 2kb or 3kb by making tables const. Add const to pointer declarations to make compilation work too. (x86-64 defconfig) $ size drivers/net/wireless/realtek/rtw88/rtw8822?.o* text data bss dec hex filename 25054 672 8 25734 6486 drivers/net/wireless/realtek/rtw88/rtw8822b.o.new 23870 1872 8 25750 6496 drivers/net/wireless/realtek/rtw88/rtw8822b.o.old 53646 828 0 54474 d4ca drivers/net/wireless/realtek/rtw88/rtw8822c.o.new 52846 1652 0 54498 d4e2 drivers/net/wireless/realtek/rtw88/rtw8822c.o.old (x86-64 allyesconfig) $ size drivers/net/wireless/realtek/rtw88/rtw8822?.o* text data bss dec hex filename 45811 6280 128 52219 cbfb drivers/net/wireless/realtek/rtw88/rtw8822b.o.new 44211 7880 128 52219 cbfb drivers/net/wireless/realtek/rtw88/rtw8822b.o.old 100195 8128 0 108323 1a723 drivers/net/wireless/realtek/rtw88/rtw8822c.o.new 98947 9376 0 108323 1a723 drivers/net/wireless/realtek/rtw88/rtw8822c.o.old Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-02-12rtw88: pci: 8822c should set clock delay to zeroYan-Hsuan Chuang1-0/+7
Since RTL8822CE has enabled reference clock auto calibration, there is no need to add any clock delay for covering the timing gap of the reference clock. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtw88: fix potential NULL skb access in TX ISRYan-Hsuan Chuang1-0/+5
Sometimes the TX queue may be empty and we could possible dequeue a NULL pointer, crash the kernel. If the skb is NULL then there is nothing to do, just leave the ISR. And the TX queue should not be empty here, so print an error to see if there is anything wrong for DMA ring. Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtw88: support wowlan feature for 8822cChin-Yen Lee1-0/+18
Wake on WLAN(wowlan) is a feature which allows devices to be woken up from suspend state through wlan events. When user enables wowlan feature and then let the device enter suspend state, wowlan firmware will be loaded by the driver and periodically monitors wifi packets. Power consumption of wifi chip will be reduced in this state. If wowlan firmware detects that specific wlan event happens, it will issue wakeup signal to trigger resume process. Driver will load normal firmware and let wifi chip return to the original state. Currently supported wlan events include receiving magic packet, rekey packet and deauth packet, and disconnecting from AP. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtw88: add interface config for 8822cYan-Hsuan Chuang1-0/+17
Some devices need to configure interface/HCI related reigsters in power on flow. Add interface_cfg for HCI for the settings. The driver only supports RTL8822BE/RTL8822CE now, and since RTL8822BE does not need to configure PCIE, the configuration is only added for RTL8822CE. Without it, some of the RTL8822CE device can crash and disconnected to host in suspend/wowlan mode. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtw88: pci: reset dma when reset pci trx ringChin-Yen Lee1-9/+10
When PCI trx rings are reset, the DMA engine should also be reset. Otherswise, the rx_tag of rx flow is not synchronous to hw. Remove DMA reset when rtw_pci_start() as we added it in rtw_pci_setup(). Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtw88: pci: reset ring index when release skbs in tx ringChin-Yen Lee1-0/+1
When skbs queued for each TX ring are relased in PCI stop flow, the ring index should be reset at the same time. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20rtw88: allows to enable/disable HCI link PS mechanismYan-Hsuan Chuang1-0/+38
Different interfaces have its own link-related power save mechanism. Such as PCI can enter L1 state based on the traffic on the link, and sometimes driver needs to enable/disable it to avoid some issues, like throughput degrade when PCI trying to enter L1 state even if driver is having heavy traffic. For now, rtw88 only supports PCIE chips, and they just need to disable ASPM L1 when driver is not in power save mode, such as IPS and LPS. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20rtw88: pci: enable CLKREQ function if host supports itYan-Hsuan Chuang1-0/+80
By Realtek's design, there are two HW modules associated for CLKREQ, one is responsible to follow the PCIE host settings, and another is to actually working on it. But the module that is actually working on it is default disabled, and driver should enable that module if host and device have successfully sync'ed with each other. The module is default disabled because sometimes the host does not support it, and if there is any incorrect settings (ex. CLKREQ# is not Bi-Direction), device can be lost and disconnected to the host. So driver should first check after host and device are sync'ed, and the host does support the function and set it in configuration space, then driver can turn on the HW module to working on it. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20rtw88: pci: use for loop instead of while loop for DBI/MDIOYan-Hsuan Chuang1-12/+14
Use a for loop to polling DBI/MDIO read/write flags to avoid infinite loop happens Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20rtw88: pci: use macros to access PCI DBI/MDIO registersYan-Hsuan Chuang1-11/+10
Add some register and bit macros to access DBI/MDIO register. This should not change the logic. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-14rtw88: pci: config phy after chip info is setupYan-Hsuan Chuang1-2/+2
Chip info such as cut_version is required to configure PCI phy. Move rtw_pci_phy_config after rtw_chip_info_setup. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-02rtw88: add deep power save supportYan-Hsuan Chuang1-0/+71
Deep power save allows firmware/hardware to operate in a lower power state. And the deep power save mode depends on LPS mode. So, before entering deep PS, driver must first enter LPS mode. Under Deep PS, most of hardware functions are shutdown, driver will not be able to read/write registers and transfer data to the device. Hence TX path must be protected by each interface. Take PCI for example, DMA engine should be idle, and no nore activities on the PCI bus. If driver wants to operate on the device, such as register read/write, it must first acquire the mutex lock and wake up from Deep PS, otherwise the behavior is undefined. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-02rtw88: pci: reset H2C queue indexes in a single writeYan-Hsuan Chuang1-3/+3
If the driver doesn't reset the host's and device's indexes in a single write, the indexes will become different in a short period. And it will confuse the DMA engine, make it start to process non-existed entries. Better to Write-1-to-reset the indexes, for the DMA engine to know that this is a reset of the H2C queue, not a kick off. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-21rtw88: pci: release tx skbs DMAed when stopYan-Hsuan Chuang1-0/+12
Interrupt is disabled to stop PCI, which means the skbs queued for each TX ring will not be released via DMA interrupt. To avoid those skbs remained being left in the skb queue until PCI has been removed, driver needs to release skbs by itself. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-21rtw88: pci: extract skbs free routine for trx ringsYan-Hsuan Chuang1-10/+26
These skbs free routines could be used when driver wants to stop PCI bus, because some of the skbs remained in the queue may not have been returned via DMA interrupt. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-11 03:39:13 +0300