summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/realtek/rtlwifi
AgeCommit message (Collapse)AuthorFilesLines
2025-08-20wifi: rtlwifi: fix possible skb memory leak in _rtl_pci_init_one_rxdesc()Thomas Fourier1-1/+4
[ Upstream commit 76b3e5078d76f0eeadb7aacf9845399f8473da0d ] When `dma_mapping_error()` is true, if a new `skb` has been allocated, then it must be de-allocated. Compile tested only Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250613074014.69856-2-fourier.thomas@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-20wifi: rtlwifi: fix possible skb memory leak in `_rtl_pci_rx_interrupt()`.Thomas Fourier1-6/+12
[ Upstream commit 44c0e191004f0e3aa1bdee3be248be14dbe5b020 ] The function `_rtl_pci_init_one_rxdesc()` can fail even when the new `skb` is passed because of a DMA mapping error. If it fails, the `skb` is not saved in the rx ringbuffer and thus lost. Compile tested only Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250616105631.444309-4-fourier.thomas@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27wifi: rtlwifi: disable ASPM for RTL8723BE with subsystem ID 11ad:1723Mingcong Bai1-0/+10
commit 77a6407c6ab240527166fb19ee96e95f5be4d3cd upstream. RTL8723BE found on some ASUSTek laptops, such as F441U and X555UQ with subsystem ID 11ad:1723 are known to output large amounts of PCIe AER errors during and after boot up, causing heavy lags and at times lock-ups: pcieport 0000:00:1c.5: AER: Correctable error message received from 0000:00:1c.5 pcieport 0000:00:1c.5: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000 pcieport 0000:00:1c.5: [ 0] RxErr Disable ASPM on this combo as a quirk. This patch is a revision of a previous patch (linked below) which attempted to disable ASPM for RTL8723BE on all Intel Skylake and Kaby Lake PCIe bridges. I take a more conservative approach as all known reports point to ASUSTek laptops of these two generations with this particular wireless card. Please note, however, before the rtl8723be finishes probing, the AER errors remained. After the module finishes probing, all AER errors would indeed be eliminated, along with heavy lags, poor network throughput, and/or occasional lock-ups. Cc: <stable@vger.kernel.org> Fixes: a619d1abe20c ("rtlwifi: rtl8723be: Add new driver") Reported-by: Liangliang Zou <rawdiamondmc@outlook.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=218127 Link: https://lore.kernel.org/lkml/05390e0b-27fd-4190-971e-e70a498c8221@lwfinger.net/T/ Tested-by: Liangliang Zou <rawdiamondmc@outlook.com> Signed-off-by: Mingcong Bai <jeffbai@aosc.io> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250422061755.356535-1-jeffbai@aosc.io Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17wifi: rtlwifi: rtl8821ae: Fix media status reportBitterblue Smith1-2/+2
commit 66ef0289ac99e155d206ddaa0fdfad09ae3cd007 upstream. RTL8821AE is stuck transmitting at the lowest rate allowed by the rate mask. This is because the firmware doesn't know the device is connected to a network. Fix the macros SET_H2CCMD_MSRRPT_PARM_OPMODE and SET_H2CCMD_MSRRPT_PARM_MACID_IND to work on the first byte of __cmd, not the second. Now the firmware is correctly notified when the device is connected to a network and it activates the rate control. Before (MCS3): [ 5] 0.00-1.00 sec 12.5 MBytes 105 Mbits/sec 0 339 KBytes [ 5] 1.00-2.00 sec 10.6 MBytes 89.1 Mbits/sec 0 339 KBytes [ 5] 2.00-3.00 sec 10.6 MBytes 89.1 Mbits/sec 0 386 KBytes [ 5] 3.00-4.00 sec 10.6 MBytes 89.1 Mbits/sec 0 386 KBytes [ 5] 4.00-5.00 sec 10.2 MBytes 86.0 Mbits/sec 0 427 KBytes After (MCS9): [ 5] 0.00-1.00 sec 33.9 MBytes 284 Mbits/sec 0 771 KBytes [ 5] 1.00-2.00 sec 31.6 MBytes 265 Mbits/sec 0 865 KBytes [ 5] 2.00-3.00 sec 29.9 MBytes 251 Mbits/sec 0 963 KBytes [ 5] 3.00-4.00 sec 28.2 MBytes 237 Mbits/sec 0 963 KBytes [ 5] 4.00-5.00 sec 26.8 MBytes 224 Mbits/sec 0 963 KBytes Fixes: 39f40710d0b5 ("rtlwifi: rtl88821ae: Remove usage of private bit manipulation macros") Cc: stable@vger.kernel.org Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/754785b3-8a78-4554-b80d-de5f603b410b@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-08wifi: rtlwifi: pci: wait for firmware loading before releasing memoryThadeu Lima de Souza Cascardo1-0/+1
[ Upstream commit b59b86c5d08be7d761c04affcbcec8184738c200 ] At probe error path, the firmware loading work may have already been queued. In such a case, it will try to access memory allocated by the probe function, which is about to be released. In such paths, wait for the firmware worker to finish before releasing memory. Fixes: 3d86b93064c7 ("rtlwifi: Fix PCI probe error path orphaned memory") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241206173713.3222187-5-cascardo@igalia.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08wifi: rtlwifi: fix memory leaks and invalid access at probe error pathThadeu Lima de Souza Cascardo1-5/+8
[ Upstream commit e7ceefbfd8d447abc8aca8ab993a942803522c06 ] Deinitialize at reverse order when probe fails. When init_sw_vars fails, rtl_deinit_core should not be called, specially now that it destroys the rtl_wq workqueue. And call rtl_pci_deinit and deinit_sw_vars, otherwise, memory will be leaked. Remove pci_set_drvdata call as it will already be cleaned up by the core driver code and could lead to memory leaks too. cf. commit 8d450935ae7f ("wireless: rtlwifi: remove unnecessary pci_set_drvdata()") and commit 3d86b93064c7 ("rtlwifi: Fix PCI probe error path orphaned memory"). Fixes: 0c8173385e54 ("rtl8192ce: Add new driver") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241206173713.3222187-4-cascardo@igalia.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08wifi: rtlwifi: destroy workqueue at rtl_deinit_coreThadeu Lima de Souza Cascardo3-7/+6
[ Upstream commit d8ece6fc3694657e4886191b32ca1690af11adda ] rtl_wq is allocated at rtl_init_core, so it makes more sense to destroy it at rtl_deinit_core. In the case of USB, where _rtl_usb_init does not require anything to be undone, that is fine. But for PCI, rtl_pci_init, which is called after rtl_init_core, needs to deallocate data, but only if it has been called. That means that destroying the workqueue needs to be done whether rtl_pci_init has been called or not. And since rtl_pci_deinit was doing it, it has to be moved out of there. It makes more sense to move it to rtl_deinit_core and have it done in both cases, USB and PCI. Since this is a requirement for a followup memory leak fix, mark this as fixing such memory leak. Fixes: 0c8173385e54 ("rtl8192ce: Add new driver") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241206173713.3222187-3-cascardo@igalia.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08wifi: rtlwifi: remove unused check_buddy_privThadeu Lima de Souza Cascardo4-64/+0
[ Upstream commit 2fdac64c3c35858aa8ac5caa70b232e03456e120 ] Commit 2461c7d60f9f ("rtlwifi: Update header file") introduced a global list of private data structures. Later on, commit 26634c4b1868 ("rtlwifi Modify existing bits to match vendor version 2013.02.07") started adding the private data to that list at probe time and added a hook, check_buddy_priv to find the private data from a similar device. However, that function was never used. Besides, though there is a lock for that list, it is never used. And when the probe fails, the private data is never removed from the list. This would cause a second probe to access freed memory. Remove the unused hook, structures and members, which will prevent the potential race condition on the list and its corruption during a second probe when probe fails. Fixes: 26634c4b1868 ("rtlwifi Modify existing bits to match vendor version 2013.02.07") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241206173713.3222187-2-cascardo@igalia.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08wifi: rtlwifi: usb: fix workqueue leak when probe failsThadeu Lima de Souza Cascardo1-0/+1
[ Upstream commit f79bc5c67867c19ce2762e7934c20dbb835ed82c ] rtl_init_core creates a workqueue that is then assigned to rtl_wq. rtl_deinit_core does not destroy it. It is left to rtl_usb_deinit, which must be called in the probe error path. Fixes: 2ca20f79e0d8 ("rtlwifi: Add usb driver") Fixes: 851639fdaeac ("rtlwifi: Modify some USB de-initialize code.") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241107133322.855112-6-cascardo@igalia.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08wifi: rtlwifi: fix init_sw_vars leak when probe failsThadeu Lima de Souza Cascardo1-0/+1
[ Upstream commit 00260350aed80c002df270c805ca443ec9a719a6 ] If ieee80211_register_hw fails, the memory allocated for the firmware will not be released. Call deinit_sw_vars as the function that undoes the allocationes done by init_sw_vars. Fixes: cefe3dfdb9f5 ("rtl8192cu: Call ieee80211_register_hw from rtl_usb_probe") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241107133322.855112-5-cascardo@igalia.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08wifi: rtlwifi: wait for firmware loading before releasing memoryThadeu Lima de Souza Cascardo1-1/+3
[ Upstream commit b4b26642b31ef282df6ff7ea8531985edfdef12a ] At probe error path, the firmware loading work may have already been queued. In such a case, it will try to access memory allocated by the probe function, which is about to be released. In such paths, wait for the firmware worker to finish before releasing memory. Fixes: a7f7c15e945a ("rtlwifi: rtl8192cu: Free ieee80211_hw if probing fails") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241107133322.855112-4-cascardo@igalia.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08wifi: rtlwifi: rtl8192se: rise completion of firmware loading as last stepThadeu Lima de Souza Cascardo1-3/+4
[ Upstream commit 8559a9e0c457729fe3edb3176bbf7c7874f482b0 ] Just like in commit 4dfde294b979 ("rtlwifi: rise completion at the last step of firmware callback"), only signal completion once the function is finished. Otherwise, the module removal waiting for the completion could free the memory that the callback will still use before returning. Fixes: b0302aba812b ("rtlwifi: Convert to asynchronous firmware load") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241107133322.855112-3-cascardo@igalia.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08wifi: rtlwifi: do not complete firmware loading needlesslyThadeu Lima de Souza Cascardo2-2/+0
[ Upstream commit e73e11d303940119e41850a0452a0deda2cc4eb5 ] The only code waiting for completion is driver removal, which will not be called when probe returns a failure. So this completion is unnecessary. Fixes: b0302aba812b ("rtlwifi: Convert to asynchronous firmware load") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241107133322.855112-2-cascardo@igalia.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08wifi: rtlwifi: rtl8821ae: phy: restore removed code to fix infinite loopColin Ian King1-1/+3
[ Upstream commit 5e5903a442bb889a62a0f5d89ac33e53ab08592c ] A previous clean-up fix removed the assignment of v2 inside a while loop that turned it into an infinite loop. Fix this by restoring the assignment of v2 from array[] so that v2 is updated inside the loop. Fixes: cda37445718d ("wifi: rtlwifi: rtl8821ae: phy: remove some useless code") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Tested-by: Ping-Ke Shih <pkshih@realtek.com> Reviewed-by: Su Hui <suhui@nfschina.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241106154642.1627886-1-colin.i.king@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05wifi: rtlwifi: Drastically reduce the attempts to read efuse in case of failuresGuilherme G. Piccoli1-1/+10
commit 5c1b544563005a00591a3aa86ecff62ed4d11be3 upstream. Syzkaller reported a hung task with uevent_show() on stack trace. That specific issue was addressed by another commit [0], but even with that fix applied (for example, running v6.12-rc5) we face another type of hung task that comes from the same reproducer [1]. By investigating that, we could narrow it to the following path: (a) Syzkaller emulates a Realtek USB WiFi adapter using raw-gadget and dummy_hcd infrastructure. (b) During the probe of rtl8192cu, the driver ends-up performing an efuse read procedure (which is related to EEPROM load IIUC), and here lies the issue: the function read_efuse() calls read_efuse_byte() many times, as loop iterations depending on the efuse size (in our example, 512 in total). This procedure for reading efuse bytes relies in a loop that performs an I/O read up to *10k* times in case of failures. We measured the time of the loop inside read_efuse_byte() alone, and in this reproducer (which involves the dummy_hcd emulation layer), it takes 15 seconds each. As a consequence, we have the driver stuck in its probe routine for big time, exposing a stack trace like below if we attempt to reboot the system, for example: task:kworker/0:3 state:D stack:0 pid:662 tgid:662 ppid:2 flags:0x00004000 Workqueue: usb_hub_wq hub_event Call Trace: __schedule+0xe22/0xeb6 schedule_timeout+0xe7/0x132 __wait_for_common+0xb5/0x12e usb_start_wait_urb+0xc5/0x1ef ? usb_alloc_urb+0x95/0xa4 usb_control_msg+0xff/0x184 _usbctrl_vendorreq_sync+0xa0/0x161 _usb_read_sync+0xb3/0xc5 read_efuse_byte+0x13c/0x146 read_efuse+0x351/0x5f0 efuse_read_all_map+0x42/0x52 rtl_efuse_shadow_map_update+0x60/0xef rtl_get_hwinfo+0x5d/0x1c2 rtl92cu_read_eeprom_info+0x10a/0x8d5 ? rtl92c_read_chip_version+0x14f/0x17e rtl_usb_probe+0x323/0x851 usb_probe_interface+0x278/0x34b really_probe+0x202/0x4a4 __driver_probe_device+0x166/0x1b2 driver_probe_device+0x2f/0xd8 [...] We propose hereby to drastically reduce the attempts of doing the I/O reads in case of failures, restricted to USB devices (given that they're inherently slower than PCIe ones). By retrying up to 10 times (instead of 10000), we got reponsiveness in the reproducer, while seems reasonable to believe that there's no sane USB device implementation in the field requiring this amount of retries at every I/O read in order to properly work. Based on that assumption, it'd be good to have it backported to stable but maybe not since driver implementation (the 10k number comes from day 0), perhaps up to 6.x series makes sense. [0] Commit 15fffc6a5624 ("driver core: Fix uevent_show() vs driver detach race") [1] A note about that: this syzkaller report presents multiple reproducers that differs by the type of emulated USB device. For this specific case, check the entry from 2024/08/08 06:23 in the list of crashes; the C repro is available at https://syzkaller.appspot.com/text?tag=ReproC&x=1521fc83980000. Cc: stable@vger.kernel.org # v6.1+ Reported-by: syzbot+edd9fe0d3a65b14588d5@syzkaller.appspotmail.com Tested-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241101193412.1390391-1-gpiccoli@igalia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-17wifi: rtlwifi: rtl8192du: Don't claim USB ID 0bda:8171Bitterblue Smith1-1/+0
This ID appears to be RTL8188SU, not RTL8192DU. This is the wrong driver for RTL8188SU. The r8712u driver from staging handles this ID. I think this ID comes from the original rtl8192du driver from Realtek. I don't know if they added it by mistake, or it was actually used for two different chips. RTL8188SU with this ID exists in the wild. RTL8192DU with this ID probably doesn't. Fixes: b5dc8873b6ff ("wifi: rtlwifi: Add rtl8192du/sw.c") Cc: stable@vger.kernel.org # v6.11 Closes: https://github.com/lwfinger/rtl8192du/issues/105 Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/40245564-41fe-4a5e-881f-cd517255b20a@gmail.com
2024-08-07wifi: rtlwifi: rtl8192du: Initialise value32 in ↵Bitterblue Smith1-1/+1
_rtl92du_init_queue_reserved_page GCC complains: In file included from include/linux/ieee80211.h:21, from include/net/mac80211.h:20, from drivers/net/wireless/realtek/rtlwifi/rtl8192du/../wifi.h:14, from drivers/net/wireless/realtek/rtlwifi/rtl8192du/hw.c:4: In function 'u32p_replace_bits', inlined from '_rtl92du_init_queue_reserved_page.isra' at drivers/net/wireless/realtek/rtlwifi/rtl8192du/hw.c:225:2: >> include/linux/bitfield.h:189:18: warning: 'value32' is used uninitialized [-Wuninitialized] Part of the variable is indeed left uninitialised. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202408062100.DWhN0CYH-lkp@intel.com/ Fixes: e769c67105d3 ("wifi: rtlwifi: Add rtl8192du/hw.{c,h}") Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/2a808244-93d0-492c-b304-ae1974df5df9@gmail.com
2024-07-09Merge tag 'rtw-next-2024-07-05' of https://github.com/pkshih/rtwKalle Valo8-8/+8
rtw-next patches for v6.11 Some cleanups of rtl8xxxu and rtlwifi, and some fixes of rtw88. The major change is to develop WoWLAN and preparation of RTL8852BE-VT listed below: rtw89: - preparation of RTL8852BE-VT * add RF calibration code * move shared code with RTL8852BE to common module - add WoWLAN for WiFi 6 chips - support 36-bit PCI DMA
2024-07-05wifi: rtlwifi: fix default typoFredrik Lönnegren8-8/+8
Change 'defult' to 'default' in comments in several rtlwifi drivers. Signed-off-by: Fredrik Lönnegren <fredrik@frelon.se> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240703070627.135328-1-fredrik@frelon.se
2024-06-26wifi: mac80211: inform the low level if drv_stop() is a suspendEmmanuel Grumbach1-2/+2
This will allow the low level driver to take different actions for different flows. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240618192529.739036208b6e.Ie18a2fe8e02bf2717549d39420b350cfdaf3d317@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-11Merge tag 'wireless-next-2024-06-07' of ↵Jakub Kicinski32-151/+7592
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.11 The first "new features" pull request for v6.11 with changes both in stack and in drivers. Nothing out of ordinary, except that we have two conflicts this time: net/mac80211/cfg.c https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au drivers/net/wireless/microchip/wilc1000/netdev.c https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au Major changes: cfg80211/mac80211 * parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers wilc1000 * read MAC address during probe to make it visible to user space iwlwifi * bump FW API to 91 for BZ/SC devices * report 64-bit radiotap timestamp * enable P2P low latency by default * handle Transmit Power Envelope (TPE) advertised by AP * start using guard() rtlwifi * RTL8192DU support ath12k * remove unsupported tx monitor handling * channel 2 in 6 GHz band support * Spatial Multiplexing Power Save (SMPS) in 6 GHz band support * multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) support * dynamic VLAN support * add panic handler for resetting the firmware state ath10k * add qcom,no-msa-ready-indicator Device Tree property * LED support for various chipsets * tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits) wifi: ath12k: add hw_link_id in ath12k_pdev wifi: ath12k: add panic handler wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity() wifi: brcm80211: remove unused structs wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type) wifi: ath12k: do not process consecutive RDDM event dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup() wifi: rtlwifi: handle return value of usb init TX/RX wifi: rtlwifi: Enable the new rtl8192du driver wifi: rtlwifi: Add rtl8192du/sw.c wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg wifi: rtlwifi: Add rtl8192du/dm.{c,h} wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h} wifi: rtlwifi: Add rtl8192du/rf.{c,h} wifi: rtlwifi: Add rtl8192du/trx.{c,h} wifi: rtlwifi: Add rtl8192du/phy.{c,h} wifi: rtlwifi: Add rtl8192du/hw.{c,h} wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU wifi: rtlwifi: Add rtl8192du/table.{c,h} ... Signed-off-by: Jakub Kicinski <kuba@kernel.org> ==================== Link: https://lore.kernel.org/r/20240607093517.41394C2BBFC@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-01wifi: rtlwifi: Ignore IEEE80211_CONF_CHANGE_RETRY_LIMITSBitterblue Smith1-15/+0
Since commit 0a44dfc07074 ("wifi: mac80211: simplify non-chanctx drivers") ieee80211_hw_config() is no longer called with changed = ~0. rtlwifi relied on ~0 in order to ignore the default retry limits of 4/7, preferring 48/48 in station mode and 7/7 in AP/IBSS. RTL8192DU has a lot of packet loss with the default limits from mac80211. Fix it by ignoring IEEE80211_CONF_CHANGE_RETRY_LIMITS completely, because it's the simplest solution. Link: https://lore.kernel.org/linux-wireless/cedd13d7691f4692b2a2fa5a24d44a22@realtek.com/ Cc: stable@vger.kernel.org # 6.9.x Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/1fabb8e4-adf3-47ae-8462-8aea963bc2a5@gmail.com
2024-05-30wifi: rtlwifi: handle return value of usb init TX/RXPing-Ke Shih1-8/+26
Handle error code to cause failed to USB probe result from unexpected USB EP number, otherwise when USB disconnect skb_dequeue() an uninitialized skb list and cause warnings below. usb 2-1: USB disconnect, device number 76 INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. CPU: 0 PID: 54060 Comm: kworker/0:1 Not tainted 6.9.0-rc7 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 Workqueue: usb_hub_wq hub_event Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x116/0x1b0 lib/dump_stack.c:114 assign_lock_key kernel/locking/lockdep.c:976 [inline] register_lock_class+0xc18/0xfa0 kernel/locking/lockdep.c:1289 __lock_acquire+0x108/0x3bc0 kernel/locking/lockdep.c:5014 lock_acquire kernel/locking/lockdep.c:5754 [inline] lock_acquire+0x1b0/0x550 kernel/locking/lockdep.c:5719 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x3d/0x60 kernel/locking/spinlock.c:162 skb_dequeue+0x20/0x180 net/core/skbuff.c:3846 rtl_usb_cleanup drivers/net/wireless/realtek/rtlwifi/usb.c:706 [inline] rtl_usb_deinit drivers/net/wireless/realtek/rtlwifi/usb.c:721 [inline] rtl_usb_disconnect+0x4a4/0x850 drivers/net/wireless/realtek/rtlwifi/usb.c:1051 usb_unbind_interface+0x1e8/0x980 drivers/usb/core/driver.c:461 device_remove drivers/base/dd.c:568 [inline] device_remove+0x122/0x170 drivers/base/dd.c:560 __device_release_driver drivers/base/dd.c:1270 [inline] device_release_driver_internal+0x443/0x620 drivers/base/dd.c:1293 bus_remove_device+0x22f/0x420 drivers/base/bus.c:574 device_del+0x395/0x9f0 drivers/base/core.c:3909 usb_disable_device+0x360/0x7b0 drivers/usb/core/message.c:1418 usb_disconnect+0x2db/0x930 drivers/usb/core/hub.c:2305 hub_port_connect drivers/usb/core/hub.c:5362 [inline] hub_port_connect_change drivers/usb/core/hub.c:5662 [inline] port_event drivers/usb/core/hub.c:5822 [inline] hub_event+0x1e39/0x4ce0 drivers/usb/core/hub.c:5904 process_one_work+0x97b/0x1a90 kernel/workqueue.c:3267 process_scheduled_works kernel/workqueue.c:3348 [inline] worker_thread+0x680/0xf00 kernel/workqueue.c:3429 kthread+0x2c7/0x3b0 kernel/kthread.c:388 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Reported-by: Shichao Lai <shichaorai@gmail.com> Closes: https://lore.kernel.org/linux-wireless/CAEk6kZuuezkH1dVRJf3EAVZK-83=OpTz62qCugkpTkswj8JF6w@mail.gmail.com/T/#u Tested-by: Shichao Lai <shichaorai@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240524003248.5952-1-pkshih@realtek.com
2024-05-30wifi: rtlwifi: Enable the new rtl8192du driverBitterblue Smith3-0/+26
The RTL8192DU is an older Wifi 4 dual band chip. It comes in two flavours: single MAC single PHY (like most Realtek Wifi 4 USB devices), and dual MAC dual PHY. The single MAC single PHY version is 2T2R and can work either in the 2.4 GHz band or the 5 GHz band. The dual MAC dual PHY version has two USB interfaces and appears to the system as two separate 1T1R Wifi devices, one working in the 2.4 GHz band, the other in the 5 GHz band. This was tested only with a single MAC single PHY device, mostly in station mode. The speeds in the 2.4 GHz band with 20 MHz channel width are similar to the out-of-tree driver: 85/51 megabits/second. Stefan Lippers-Hollmann tested the speed in the 5 GHz band with 40 MHz channel width: 173/99 megabits/second. It was also tested briefly in AP mode. It's emitting beacons and my phone can connect to it. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/5f2da7ee-876a-42fc-8fec-ec5386fa8c26@gmail.com
2024-05-30wifi: rtlwifi: Add rtl8192du/sw.cBitterblue Smith1-0/+395
This contains the new module's entry point. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/1fdc83ac-4a6f-4645-8837-6e38683b6c84@gmail.com
2024-05-30wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfgBitterblue Smith5-8/+7
This allows the drivers to declare the structs rtl_hal_cfg, rtl_hal_ops, and rtl_hal_usbint_cfg as const. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/1b29994f-3d07-4297-875d-57c3a87a1ec6@gmail.com
2024-05-30wifi: rtlwifi: Add rtl8192du/dm.{c,h}Bitterblue Smith2-0/+130
These contain functions related to the dynamic mechanism, which runs every two seconds to adjust to changes in the environment. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/a010ed6d-efb0-456d-bd4a-dfc6da23e7aa@gmail.com
2024-05-30wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h}Bitterblue Smith4-0/+91
fw.c contains a function for loading the firmware. led.c contains a function for controlling the LED. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/a52b8907-267c-4811-90ca-5eb852a2aa09@gmail.com
2024-05-30wifi: rtlwifi: Add rtl8192du/rf.{c,h}Bitterblue Smith2-0/+251
These contain one RF configuration function and some functions related to dual MAC operation. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/36258d72-11fd-4f70-84c6-782972f706ed@gmail.com
2024-05-30wifi: rtlwifi: Add rtl8192du/trx.{c,h}Bitterblue Smith2-0/+432
These contain routines related to sending frames to the chip. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/bd2c24a0-a1fe-493a-8079-d83fda81a0d5@gmail.com
2024-05-30wifi: rtlwifi: Add rtl8192du/phy.{c,h}Bitterblue Smith2-0/+3155
These contain mostly the calibration and channel switching routines for RTL8192DU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/299a5ab7-46bf-410b-bbeb-e252eeeeb34c@gmail.com
2024-05-30wifi: rtlwifi: Add rtl8192du/hw.{c,h}Bitterblue Smith2-0/+1234
These contain mostly hardware init/deinit routines for RTL8192DU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/282afe18-f37d-45f7-9275-68c39d1fde09@gmail.com
2024-05-30wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DUBitterblue Smith1-0/+6
These are needed for the dual MAC version of RTL8192DU. The two mutexes are used to avoid concurrent access to the hardware from the two USB interfaces. The two arrays are filled by one interface during LC calibration and accessed by the other interface during channel switching. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/d1bf581b-de41-4d09-bf56-768c2fc29dd3@gmail.com
2024-05-30wifi: rtlwifi: Add rtl8192du/table.{c,h}Bitterblue Smith2-0/+1704
These contain the MAC, BB, RF, and AGC initialisation tables for RTL8192DU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/5ea548b9-5ec6-4358-aa5d-94071f2341cb@gmail.com
2024-05-30wifi: rtlwifi: rtl8192d: Use "rtl92d" prefixBitterblue Smith7-135/+135
Some functions moved from rtl8192de still use the "rtl92de" prefix. Rename them. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/abe3624d-f986-4a24-966c-67defa962e3f@gmail.com
2024-05-04wifi: rtlwifi: 8192d: initialize rate_mask in rtl92de_update_hal_rate_mask()Ping-Ke Shih1-1/+1
le32p_replace_bits() only updates partial bits of rate_mask, and GCC warns below. Set initial value to avoid warnings, and prevent random value of missed bits (bit 6 of rate_mask.macid_and_short_gi). In file included from ./include/linux/fortify-string.h:5, from ./include/linux/string.h:369, from ./include/linux/bitmap.h:13, from ./include/linux/cpumask.h:13, from ./include/linux/sched.h:16, from drivers/net/wireless/realtek/rtlwifi/rtl8192d/../wifi.h:9, from drivers/net/wireless/realtek/rtlwifi/rtl8192d/hw_common.c:4: In function 'le32p_replace_bits', inlined from 'rtl92de_update_hal_rate_mask.isra' at drivers/net/wireless/realtek/rtlwifi/rtl8192d/hw_common.c:986:2: ./include/linux/bitfield.h:189:15: warning: 'rate_mask' is used uninitialized [-Wuninitialized] 189 | *p = (*p & ~to(field)) | type##_encode_bits(val, field); \ | ^~ ./include/linux/bitfield.h:196:9: note: in expansion of macro '____MAKE_OP' 196 | ____MAKE_OP(le##size,u##size,cpu_to_le##size,le##size##_to_cpu) \ | ^~~~~~~~~~~ ./include/linux/bitfield.h:201:1: note: in expansion of macro '__MAKE_OP' 201 | __MAKE_OP(32) | ^~~~~~~~~ drivers/net/wireless/realtek/rtlwifi/rtl8192d/hw_common.c: In function 'rtl92de_update_hal_rate_mask.isra': drivers/net/wireless/realtek/rtlwifi/rtl8192d/hw_common.c:863:37: note: 'rate_mask' declared here 863 | struct rtl92d_rate_mask_h2c rate_mask; | ^~~~~~~~~ Compile tested only. Fixes: 014bba73b525 ("wifi: rtlwifi: Adjust rtl8192d-common for USB") Cc: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240504111916.31445-1-pkshih@realtek.com
2024-05-04wifi: rtlwifi: Remove unused structs and avoid multiple -Wfamnae warningsGustavo A. R. Silva1-27/+0
Wflex-array-member-not-at-end is coming in GCC-14, and we are getting ready to enable it globally. So, remove unused structs and fix the following -Wflex-array-member-not-at-end warnings: drivers/net/wireless/realtek/rtlwifi/btcoexist/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/realtek/rtlwifi/rtl8188ee/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/realtek/rtlwifi/rtl8192c/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/realtek/rtlwifi/rtl8192ce/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/realtek/rtlwifi/rtl8192cu/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/realtek/rtlwifi/rtl8192de/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/realtek/rtlwifi/rtl8192ee/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/realtek/rtlwifi/rtl8192se/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/realtek/rtlwifi/rtl8723ae/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/realtek/rtlwifi/rtl8723be/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/realtek/rtlwifi/rtl8723com/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/realtek/rtlwifi/rtl8821ae/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/realtek/rtlwifi/wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/ZjLFIa31BGPVCGh1@neat
2024-05-02wifi: rtlwifi: Adjust rtl8192d-common for USBBitterblue Smith10-44/+268
A few of the shared functions need small changes for the USB driver: - firmware loading - efuse reading - rate mask updating - rf register reading - initial gain for scanning Also, add a few macros to wifi.h and initialise rtlhal.interfaceindex for USB devices. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/28100330-f421-4b85-b41b-f1045380cef2@gmail.com
2024-05-02wifi: rtlwifi: Clean up rtl8192d-common a bitBitterblue Smith8-471/+422
Improve readability: * add empty lines * use abs_diff in rtl92d_dm_txpower_tracking_callback_thermalmeter * roll up repeated statements into a for loop in rtl92d_dm_txpower_tracking_callback_thermalmeter * shorten lines by replacing many instances of "rtlpriv->dm" with "dm" pointer in rtl92d_dm_txpower_tracking_callback_thermalmeter * sort some declarations by length * refactor _rtl92d_get_txpower_writeval_by_regulatory a little * refactor _rtl92de_readpowervalue_fromprom a little Delete unused structs tag_dynamic_init_gain_operation_type_definition and swat. Simplify rtl92d_fill_h2c_cmd a little and delete a pointless wrapper function. Tested with a single MAC single PHY USB dongle from Aliexpress labelled "CC&C WL-6210-V3". Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/f6acfa78-2f4e-47f1-95d4-65aa77510113@gmail.com
2024-05-02wifi: rtlwifi: Move code from rtl8192de to rtl8192d-commonBitterblue Smith35-4927/+5166
Create the new module rtl8192d-common and move some code into it from rtl8192de. Now the rtl8192de driver (PCI) and the new rtl8192du driver (USB) can share some of the code. This is mostly the code that required little effort to make it shareable. There are a few more functions which they could share, with more changes. Add phy_iq_calibrate member to struct rtl_hal_ops to allow moving the TX power tracking code from dm.c. The other changes in this patch are adjusting whitespace, renaming some functions, making some arrays const, and making checkpatch.pl less unhappy. rtl8192de is compile-tested only. rtl8192d-common is tested with the new rtl8192du driver. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/69c4358a-6fbf-4433-92a6-341c83e9dd48@gmail.com
2024-05-02wifi: rtlwifi: rtl8192de: Fix endianness issue in RX pathBitterblue Smith2-66/+15
Structs rx_desc_92d and rx_fwinfo_92d will not work for big endian systems. Delete rx_desc_92d because it's big and barely used, and instead use the get_rx_desc_rxmcs and get_rx_desc_rxht functions, which work on big endian systems too. Fix rx_fwinfo_92d by duplicating four of its members in the correct order. Tested only with RTL8192DU, which will use the same code. Tested only on a little endian system. Cc: stable@vger.kernel.org Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/698463da-5ef1-40c7-b744-fa51ad847caf@gmail.com
2024-05-02wifi: rtlwifi: rtl8192de: Fix low speed with WPA3-SAEBitterblue Smith2-3/+16
Some (all?) management frames are incorrectly reported to mac80211 as decrypted when actually the hardware did not decrypt them. This results in speeds 3-5 times lower than expected, 20-30 Mbps instead of 100 Mbps. Fix this by checking the encryption type field of the RX descriptor. rtw88 does the same thing. This fix was tested only with rtl8192du, which will use the same code. Cc: stable@vger.kernel.org Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/4d600435-f0ea-46b0-bdb4-e60f173da8dd@gmail.com
2024-05-02wifi: rtlwifi: rtl8192de: Fix 5 GHz TX powerBitterblue Smith1-2/+2
Different channels have different TX power settings. rtl8192de is using the TX power setting from the wrong channel in the 5 GHz band because _rtl92c_phy_get_rightchnlplace expects an array which includes all the channel numbers, but it's using an array which includes only the 5 GHz channel numbers. Use the array channel_all (defined in rtl8192de/phy.c) instead of the incorrect channel5g (defined in core.c). Tested only with rtl8192du, which will use the same TX power code. Cc: stable@vger.kernel.org Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/c7653517-cf88-4f57-b79a-8edb0a8b32f0@gmail.com
2024-04-29wifi: rtlwifi: rtl8723be: Make read-only arrays static constColin Ian King1-19/+26
Don't populate the read-only arrays cck_rates, ofdm_rates, ht_rates_1t and channel_all on the stack at run time, instead make them static const and clean up the formatting. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240425155733.114423-1-colin.i.king@gmail.com
2024-03-22wifi: rtlwifi: always assume QoS mode in rtl8192cuDmitry Antipov1-26/+4
In 'rtl92cu_set_hw_reg()', always assume that QoS mode is enabled as it was hardcoded since an initial commit. Compile tested only. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240320084324.109506-2-dmantipov@yandex.ru
2024-03-22wifi: rtlwifi: drop WMM stubs from rtl8192cuDmitry Antipov1-117/+48
Since WMM support was never actually implemented and related TODO is more than 13 years old, it might be reasonable to remove all of the WMM stubs from rtl8192cu and simplify related code. Minor comment style adjustments suggested by checkpatch.pl, compile tested only. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240320084324.109506-1-dmantipov@yandex.ru
2024-03-05wifi: rtlwifi: Remove rtl_intf_ops.read_efuse_byteBitterblue Smith3-6/+2
PCI drivers and USB drivers can both use the same function, read_efuse_byte(), and they can call it directly. rtl8192de was the only user. Tested only with the upcoming rtl8192du driver. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/4e2c968d-f25c-4a40-be97-4fdcbdde69cf@gmail.com
2024-02-21wifi: rtlwifi: set initial values for unexpected cases of USB endpoint priorityPing-Ke Shih1-3/+3
Map USB endpoints to hardware and AC queues according to number of USB endpoints. However, original only give a warning for unexpected cases but initial values are not given. Then, smatch warns: drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c:642 _rtl92cu_init_chipn_two_out_ep_priority() error: uninitialized symbol 'valuelow'. drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c:644 _rtl92cu_init_chipn_two_out_ep_priority() error: uninitialized symbol 'valuehi'. drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c:649 _rtl92cu_init_chipn_two_out_ep_priority() error: uninitialized symbol 'valuehi'. drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c:650 _rtl92cu_init_chipn_two_out_ep_priority() error: uninitialized symbol 'valuelow'. The regular selection is high and low queues, so move default (unexpected) case along with that. Compile tested only. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240216033949.34765-1-pkshih@realtek.com
2024-02-21wifi: rtlwifi: rtl8192cu: Fix TX aggregationBitterblue Smith3-17/+17
rtl8192cu is checking rtl_mac.tids when deciding if it should enable aggregation. This is wrong because rtl_mac.tids is not initialised anywhere. Check rtl_sta_info.tids instead, which is initialised. Also, when enabling aggregation also enable RTS. The vendor driver does this, my router does this. It seems like the thing to do. Also also, it seems right to set the AMPDU density only when enabling aggregation. Also also also, delete the unused member rtl_mac.tids and the unused macros RTL_AGG_ON and RTL_AGG_OFF. Naturally, with working AMPDU the download/upload speeds are better. Before: 59/32 Mbps. After: 68/46 Mbps. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/4e936334-5f81-403f-a495-0628ebfb6903@gmail.com
2024-02-15wifi: rtlwifi: rtl_usb: Store the endpoint addressesBitterblue Smith6-45/+68
And use the stored addresses in rtl8192cu instead of hardcoding them. This is what the vendor drivers do. Perhaps this is not strictly necessary for RTL8192CU devices. However, the dual mac version of RTL8192DU has two USB interfaces, each with its own set of endpoints. Hardcoding their addresses in the upcoming rtl8192du driver would require making some assumptions which I'm not qualified to make. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/7b6a602a-6101-4bab-958d-bcff4d565b40@gmail.com
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-25 06:46:56 +0300