Age | Commit message (Expand) | Author | Files | Lines |
2017-01-20 | rtl8xxxu: Update author/maintainer contact info | Jes Sorensen | 1 | -1/+1 |
2016-09-17 | rtl8xxxu: Implement 8192e specific power down sequence | Jes Sorensen | 1 | -0/+1 |
2016-09-03 | rtl8xxxu: Add interrupt bit definitions for gen2 parts | Jes Sorensen | 1 | -0/+56 |
2016-09-03 | rtl8xxxu: Add bit definitions for REG_FPGA0_TX_INFO | Jes Sorensen | 1 | -0/+4 |
2016-06-29 | rtl8xxxu: Add additional documentation for RX DMA registers | Jes Sorensen | 1 | -3/+7 |
2016-06-29 | rtl8xxxu: Add bit definitions for REG_USB_SPECIAL_OPTION | Jes Sorensen | 1 | -0/+4 |
2016-04-15 | rtl8xxxu: Update copyright statement to include 2016 | Jes Sorensen | 1 | -1/+1 |
2016-04-15 | rtl8xxxu: Use descriptive bits for setting RX paths for 1T2R parts | Jes Sorensen | 1 | -0/+4 |
2016-04-15 | rtl8xxxu: Implement generic init_queue_reserved_page() function | Jes Sorensen | 1 | -1/+1 |
2016-04-14 | rtl8xxxu: Adjust AFE crystal value on 8192eu | Jes Sorensen | 1 | -0/+4 |
2016-04-14 | rtl8xxxu: Implement IQK calibration for 8192eu | Jes Sorensen | 1 | -0/+1 |
2016-04-14 | rtl8xxxu: Implement 8192eu device specific quirks | Jes Sorensen | 1 | -0/+1 |
2016-04-14 | rtl8xxxu: Set REG_USB_HRPWM for 8192eu | Jes Sorensen | 1 | -0/+1 |
2016-04-07 | rtl8xxxu: Update some register definitions | Jes Sorensen | 1 | -7/+24 |
2016-03-10 | rtl8xxxu: Flush FIFO before powering down devices | Jes Sorensen | 1 | -0/+2 |
2016-03-10 | rtl8xxxu: Implement device specific power_off function | Jes Sorensen | 1 | -0/+2 |
2016-03-10 | rtl8xxxu: Use define for REG_PWR_DATA bits | Jes Sorensen | 1 | -1/+1 |
2016-03-10 | rtl8xxxu: RF_T_METER is different on the newer chips | Jes Sorensen | 1 | -6/+7 |
2016-03-10 | rtl8xxxu: Implement init_statistics for 8723bu | Jes Sorensen | 1 | -0/+7 |
2016-03-10 | rtl8xxxu: Setup RX aggregation | Jes Sorensen | 1 | -0/+1 |
2016-03-10 | rtl8xxxu: Add REG_DWBCN1_CTRL_8723B define | Jes Sorensen | 1 | -0/+2 |
2016-03-10 | rtl8xxxu: Initialize burst parameters for 8723bu | Jes Sorensen | 1 | -1/+4 |
2016-03-10 | rtl8xxxu: Implement 8723bu power on sequence | Jes Sorensen | 1 | -0/+11 |
2016-03-10 | rtl8xxxu: Improve 8723bu init code | Jes Sorensen | 1 | -1/+4 |
2016-03-10 | rtl8xxxu: Initial rtl8723bu_init_bt() code | Jes Sorensen | 1 | -0/+2 |
2016-03-10 | rtl8xxxu: Initial implementation of rtl8723bu_config_channel() | Jes Sorensen | 1 | -0/+14 |
2016-03-10 | rtl8xxxu: First stab at adding IQK calibration for 8723bu parts | Jes Sorensen | 1 | -0/+17 |
2016-03-10 | rtl8xxxu: Add a couple of new register definitions | Jes Sorensen | 1 | -0/+6 |
2016-03-10 | rtl8xxxu: Add some missing register definitions for 8723bu | Jes Sorensen | 1 | -1/+7 |
2016-03-10 | rtl8xxxu: Init REG_HIMR[01] for 8192eu parts | Jes Sorensen | 1 | -0/+4 |
2016-03-10 | rtl8xxxu: Kludge to drop incorrect USB OUT EP for 8192EU | Jes Sorensen | 1 | -0/+1 |
2016-03-10 | rtl8xxxu: Add rtl8xxxu_auto_llt_table() | Jes Sorensen | 1 | -0/+3 |
2016-03-10 | rtl8xxxu: Implment rtl8192eu_power_on() | Jes Sorensen | 1 | -0/+6 |
2016-03-10 | rtl8xxxu: Identify chip vendors correctly | Jes Sorensen | 1 | -0/+4 |
2016-02-25 | rtl8xxxu: Add missing bit define for REG_APS_FSMCO | Jes Sorensen | 1 | -0/+1 |
2016-02-25 | rtl8xxxu: Document REG_RXFLTMAP registers | Bruno Randolf | 1 | -6/+20 |
2016-02-25 | rtl8xxxu: Add REG_OFDM0_RX_D_SYNC_PATH definitions | Jes Sorensen | 1 | -0/+3 |
2016-02-25 | rtl8xxxu: Add mbox extension register definitions for 8723B | Jes Sorensen | 1 | -0/+5 |
2016-02-25 | rtl8xxxu: Add definitions for antenna selection registers for 8723BU | Jes Sorensen | 1 | -0/+4 |
2016-02-25 | rtl8xxxu: Add more RCR bits | Jes Sorensen | 1 | -1/+10 |
2016-02-25 | rtl8xxxu: Add REG_TX_REPORT_* defines | Jes Sorensen | 1 | -0/+2 |
2016-02-25 | rtl8xxxu: Define SYS_CFG_SW_OFFLOAD_EN | Jes Sorensen | 1 | -0/+1 |
2016-02-25 | rtl8xxxu: Add RQPN_[NE]PQ_SHIFT values | Jes Sorensen | 1 | -0/+2 |
2015-10-21 | New driver: rtl8xxxu (mac80211) | Jes Sorensen | 1 | -0/+981 |