summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mwl8k.c
AgeCommit message (Collapse)AuthorFilesLines
2015-09-22mac80211: allow to transmit A-MSDU within A-MPDUEmmanuel Grumbach1-1/+1
Advertise the capability to send A-MSDU within A-MPDU in the AddBA request sent by mac80211. Let the driver know about the peer's capabilities. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-18mwl8k: refactor some conditionals for clarityJohn Linville1-24/+25
CC [M] drivers/net/wireless/mwl8k.o drivers/net/wireless/mwl8k.c: In function ‘mwl8k_bss_info_changed’: drivers/net/wireless/mwl8k.c:3290:2: warning: ‘ap_mcs_rates’ may be used uninitialized in this function [-Wmaybe-uninitialized] memcpy(cmd->mcs_set, mcs_rates, 16); ^ drivers/net/wireless/mwl8k.c:4987:5: note: ‘ap_mcs_rates’ was declared here u8 ap_mcs_rates[16]; ^ The warning was bogus. But the conditionals were rather complicated, with multiple redundant checks. This consolidates the checking and makes it more readable IMHO. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-10mac80211: convert HW flags to unsigned long bitmapJohannes Berg1-4/+5
As we're running out of hardware capability flags pretty quickly, convert them to use the regular test_bit() style unsigned long bitmaps. This introduces a number of helper functions/macros to set and to test the bits, along with new debugfs code. The occurrences of an explicit __clear_bit() are intentional, the drivers were never supposed to change their supported bits on the fly. We should investigate changing this to be a per-frame flag. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-24mac80211: remove support for IFF_PROMISCJohannes Berg1-1/+1
This support is essentially useless as typically networks are encrypted, frames will be filtered by hardware, and rate scaling will be done with the intended recipient in mind. For real monitoring of the network, the monitor mode support should be used instead. Removing it removes a lot of corner cases. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-04wireless: Use eth_<foo>_addr instead of memsetJoe Perches1-1/+1
Use the built-in function instead of memset. Miscellanea: Add #include <linux/etherdevice.h> where appropriate Use ETH_ALEN instead of 6 Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-08cfg80211: remove "channel" from survey namesJohannes Berg1-6/+6
All of the survey data is (currently) per channel anyway, so having the word "channel" in the name does nothing. In the next patch I'll introduce global data to the survey, where the word "channel" is actually confusing. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: allow drivers to support NL80211_SCAN_FLAG_RANDOM_ADDRJohannes Berg1-2/+5
Allow drivers to support NL80211_SCAN_FLAG_RANDOM_ADDR with software based scanning and generate a random MAC address for them for every scan request with the flag. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine1-1/+1
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-08-09mwl8k: use pci_zalloc_consistentJoe Perches1-4/+2
Remove the now unnecessary memset too. Signed-off-by: Joe Perches <joe@perches.com> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-21mwl8k: remove unnecessary break after returnFabian Frederick1-5/+0
Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-06mwl8k: mwl8k_update_survey can be staticYogesh Ashok Powar1-2/+2
It fixes following sparse check warning >#make C=1 CF=-D__CHECK_ENDIAN__ drivers/net/wireless/mwl8k.o >drivers/net/wireless/mwl8k.c:3089:6: warning: symbol 'mwl8k_update_survey' was not declared. Should it be static? Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-06mwl8k: le32_to_cpu cast to restrictedYogesh Ashok Powar1-2/+2
It fixes couple of sparse check >#make C=1 CF=-D__CHECK_ENDIAN__ drivers/net/wireless/mwl8k.o >drivers/net/wireless/mwl8k.c:3104:19: warning: cast to restricted __le32 >drivers/net/wireless/mwl8k.c:3108:18: warning: cast to restricted __le32 Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28mwl8k: Adding support to gather survey per channelYogesh Ashok Powar1-6/+109
Survey stats such as channel busy time, rx busy time and noise are collected when sw_scan starts for every switched new channel. This happens till sw_scan stops. All the collected stats are shared up when get_survey() is called. This implements support for ACS feature from Hostapd. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28mwl8k: Implement sw_scan start/stop cbsYogesh Ashok Powar1-0/+40
Implement sw_scan start and stop callbacks. Reset BBP registers for channel, RX busy and average noise stats which clear on read. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28mwl8k: Adding support to access BBP registersYogesh Ashok Powar1-0/+42
Adding AP firmware command to access BBP regs. This will be used for retrieving different counters CCA/RX needed for ACS Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-13Merge branch 'for-john' of ↵John W. Linville1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2014-01-08mac80211: remove channel_change_timeJohannes Berg1-2/+0
This value is no longer used by mac80211, and practically no driver ever set it to a correct value anyway, so remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-04wireless: delete non-required instances of include <linux/init.h>Paul Gortmaker1-1/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-04mwl8k: use ether_addr_equal_64bitsJulia Lawall1-1/+1
Ether_addr_equal_64bits is more efficient than ether_addr_equal, and can be used when each argument is an array within a structure that contains at least two bytes of data beyond the array. The structures involved are: ieee80211_hdr defined in include/linux/ieee80211.h and mwl8k_priv defined in drivers/net/wireless/mwl8k.c This was done using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26wireless: mwl8k: remove unnecessary pci_set_drvdata()Jingoo Han1-2/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24mwl8k: Fix the firmware hang issue for 8764Nishant Sarmukadam1-2/+9
The firmware hang issue is not seen very often, though it is still seen sometimes (once in 12 hours in local tests). The changes in the driver ,to interrupt the firmware, are needed when we detect that firmware is stuck and when the host queues are full and we begin to drop packets. This is to ensure that the firmware does not miss any PPA_RDY interrupts to cause the firmware restart dont miss PPA_READY interrupt for SC2 Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22mwl8k: remove nonstandard rate 72 MbpsJonas Gorski1-6/+4
This rate causes an overflow in the extended rates IE's data rate field, with the overflowing bit setting the Basic Rate Set membership. This results in a bogus 8 Mpbs basic rate, making clients checking them refuse association. Since the rate is likely unused anyway (HT will yield better rates between supporting chips), we can just remove it. This fixes association from wpa_supplicant and Android 4.x and newer. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-10Merge branch 'for-john' of ↵John W. Linville1-16/+20
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: drivers/net/wireless/ath/carl9170/debug.c drivers/net/wireless/ath/carl9170/main.c net/mac80211/ieee80211_i.h
2013-03-27mwl8k: always apply configuration even when device is idleJonas Gorski1-6/+4
Fix settings not being applied when the device is idle and the firmware gets reloaded (because of changing from STA to AP mode). This caused the device using the wrong channel (and likely band), e.g. a 5 GHz only card still defaulted to channel 6 in the 2.4 GHz band when left unconfigured. This issue was always present, but only made visible with "mwl8k: Do not call mwl8k_cmd_set_rf_channel unconditionally" (0f4316b9), since before that the channel was (re-)configured at the next _config call even when it did not change from the mac80211 perspective. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-25mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chanKarl Beldan1-16/+20
Drivers that don't use chanctxes cannot perform VHT association because they still use a "backward compatibility" pair of {ieee80211_channel, nl80211_channel_type} in ieee80211_conf and ieee80211_local. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> [fix kernel-doc] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-11mwl8k: don't overwrite regulatory settings on fw reloadJonas Gorski1-0/+6
Currently the caps are parsed on every firmware reload, causing any channel flags to be cleared. When there is a firmware to interface mode mismatch, the triggered firmware reload causes a reset of the regulatory settings, causing all channels to become available: root@openrouter:/# iw phy phy0 info Wiphy phy0 Band 1: (...) Frequencies: * 2412 MHz [1] (0.0 dBm) * 2417 MHz [2] (0.0 dBm) * 2422 MHz [3] (0.0 dBm) * 2427 MHz [4] (0.0 dBm) * 2432 MHz [5] (0.0 dBm) * 2437 MHz [6] (0.0 dBm) * 2442 MHz [7] (0.0 dBm) * 2447 MHz [8] (0.0 dBm) * 2452 MHz [9] (0.0 dBm) * 2457 MHz [10] (0.0 dBm) * 2462 MHz [11] (0.0 dBm) * 2467 MHz [12] (0.0 dBm) * 2472 MHz [13] (0.0 dBm) * 2484 MHz [14] (0.0 dBm) (...) To prevent this, only parse the caps on the first firmware load during hardware probe, and store them locally to know we have already parsed them. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-07mwl8k: Load 8764 firmware imageNishant Sarmukadam1-8/+19
This differs from legacy chips i.e. a 8764 loads firmware image without a helper image b Check interrupt status register for download complete indication. Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-07mwl8k: Adding support for 8764 4x4 APNishant Sarmukadam1-33/+45
The patch does the following:- a Add entry in the PCIe table b Add firmware support with API versioning c Reuse most of the 8366 code d Make 8764 specific changes where 8764 differs from 8366 e.g. structure definitions. Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-14Merge branch 'master' of ↵John W. Linville1-18/+18
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/dvm/tx.c
2013-02-11mwl8k: fix band for supported channelsJonas Gorski1-18/+18
The band field for the supported channels were left unpopulated, making them default to 0 == IEEE80211_BAND_2GHZ, even for the 5GHz channels. This resulted in null pointer accesses if anything tries to access wiphy->bands[channel->band] of a 5GHz channel on 5GHz only cards, since wiphy->bands[2GHZ] is NULL for them (e.g. cfg80211_chandef_usable does). Example kernel OOPS: [ 665.669993] Unable to handle kernel NULL pointer dereference at virtual address 00000016 [ 665.678194] pgd = c6d58000 [ 665.680941] [00000016] *pgd=06f8a831, *pte=00000000, *ppte=00000000 [ 665.687303] Internal error: Oops: 17 [#1] (...) [ 666.116373] Backtrace: [ 666.118866] [<bf0368dc>] (cfg80211_chandef_usable+0x0/0x1bc [cfg80211]) from [<bf025e64>] (nl80211_leave_mesh+0x244/0x264 [cfg80211]) [ 666.130919] r7:c6d12100 r6:0000143c r5:c0611c48 r4:c0611b98 [ 666.136668] [<bf025d84>] (nl80211_leave_mesh+0x164/0x264 [cfg80211]) from [<bf02634c>] (nl80211_remain_on_channel+0x2a0/0x358 [cfg80211]) [ 666.149074] r7:c6d12000 r6:c6d12000 r5:c6f4f368 r4:00000003 [ 666.154814] [<bf0262ec>] (nl80211_remain_on_channel+0x240/0x358 [cfg80211]) from [<bf02ddb0>] (nl80211_set_wiphy+0x264/0x560 [cfg80211]) [ 666.167150] [<bf02db4c>] (nl80211_set_wiphy+0x0/0x560 [cfg80211]) from [<c01f94e0>] (genl_rcv_msg+0x1b8/0x1f8) [ 666.177205] [<c01f9328>] (genl_rcv_msg+0x0/0x1f8) from [<c01f89a0>] (netlink_rcv_skb+0x58/0xb4) [ 666.185949] [<c01f8948>] (netlink_rcv_skb+0x0/0xb4) from [<c01f931c>] (genl_rcv+0x20/0x2c) [ 666.194251] r6:c6f70780 r5:0000002c r4:c6f70780 r3:00000001 [ 666.199973] [<c01f92fc>] (genl_rcv+0x0/0x2c) from [<c01f8418>] (netlink_unicast+0x154/0x1f4) [ 666.208449] r4:c785ea00 r3:c01f92fc [ 666.212057] [<c01f82c4>] (netlink_unicast+0x0/0x1f4) from [<c01f8790>] (netlink_sendmsg+0x230/0x2b0) [ 666.221240] [<c01f8560>] (netlink_sendmsg+0x0/0x2b0) from [<c01cccf8>] (sock_sendmsg+0x90/0xa4) [ 666.229986] [<c01ccc68>] (sock_sendmsg+0x0/0xa4) from [<c01cdcb0>] (__sys_sendmsg+0x290/0x298) [ 666.238637] r9:00000000 r8:c0611ec8 r6:0000002c r5:c0610000 r4:c0611f64 [ 666.245411] [<c01cda20>] (__sys_sendmsg+0x0/0x298) from [<c01cf52c>] (sys_sendmsg+0x44/0x6c) [ 666.253897] [<c01cf4e8>] (sys_sendmsg+0x0/0x6c) from [<c00090a0>] (ret_fast_syscall+0x0/0x2c) [ 666.262460] r6:00000000 r5:beeff96c r4:00000005 Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08mwl8k: Remove unnecessary alloc/OOM messagesJoe Perches1-2/+0
alloc failures already get standardized OOM messages and a dump_stack. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08mwl8k: add single band 88W8366 PCI device IDsJonas Gorski1-0/+2
Add PCI deviceIDs for single band versions of 88W8366, found e.g. in simultaneous dual band routers based on kirkwood. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-31mwl8k: Do not call STA specific cmds not supported by the AP fwYogesh Ashok Powar1-3/+23
While using STA mode in the AP firmware, avoid calling some firmware commands which are not supported by the AP firmware. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-31mwl8k: Choose interface specific calls on vif typeYogesh Ashok Powar1-4/+2
Choose interface specific function calls based on interface type instead of firmware types. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-31mwl8k: Add/Del self entry for AP interface onlyYogesh Ashok Powar1-2/+2
Add and delete self entry in the firmware sta database for AP interface only. We do not need such an entry for STA interface. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-31mwl8k: Enable hw encryption for STA mode on AP fwYogesh Ashok Powar1-1/+2
Firmware supports hardware encryption feature for the station interface running on AP firmware. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-31mwl8k: set mac type to MWL8K_MAC_TYPE_SECONDARY_CLIENTYogesh Ashok Powar1-1/+4
Set mac type for station interface on AP firmware as secondary. This allows the firmware to set specific characteristics for the STA interface. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-31mwl8k: Allow adding station interface on AP firmwareYogesh Ashok Powar1-7/+13
When user wants to add a station interface when AP firmware is loaded & in-use, allow creating it and also notify user about the same. Allow adding max one STA interface for AP fw. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-31mwl8k: Announce simultaneous AP-STA support on AP fwYogesh Ashok Powar1-0/+2
Specify the STA support in iface_limit and in wihpy->interface_modes Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-31mwl8k: Move tx/rx antenna configuration to mwl8k_probe_hwYogesh Ashok Powar1-6/+9
This avoids calling mwl8k_cmd_rf_antenna functions every time mwl8k_config function is called. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-31mwl8k: Do not call mwl8k_cmd_set_rf_channel unconditionallyYogesh Ashok Powar1-3/+5
Avoid calling mwl8k_cmd_set_rf_channel unconditionally by checking IEEE80211_CONF_CHANGE_CHANNEL. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-31mwl8k: Stop bsses before hw specific commandsYogesh Ashok Powar1-8/+70
For the commands, that might change the hw characteristics of the PHY device, stop the running bsses and resume them once command is complete. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-28Merge branch 'master' of ↵John W. Linville1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/ath/ath9k/main.c drivers/net/wireless/iwlwifi/dvm/tx.c
2013-01-23mwl8k: don't return zero on failure paths in mwl8k_probe[_hw]()Alexey Khoroshilov1-0/+3
If pci_iomap() fails in mwl8k_probe(), it breaks off initialization, deallocates all resources, but returns zero. There is a similar issue when priv->rxd_ops is NULL in mwl8k_probe_hw(). The patch adds proper error code return values. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-09mwl8k: Wake up queues in mwl8k_startNishant Sarmukadam1-0/+2
If queues are stopped in mwl8k_stop, these should be started in mwl8k_start Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Yogesh Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-09mwl8k: Delete ampdu streams with state AMPDU_STREAM_NEW in sta removeYogesh Ashok Powar1-1/+24
When a station deauths, we do not delete the streams with state AMPDU_STREAM_NEW and these remain created forever. Fix this issue by removing such streams in the driver Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-09mwl8k: Disable tx_wait completionNishant Sarmukadam1-0/+1
Whenever TX ring is drained, priv->tx_wait still points to a valid completion. Making sure that it points to NULL before returning from the mwl8k_tx_wait_empty check. Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-08mwl8k: bump firmware API to 3Yogesh Ashok Powar1-1/+1
New firmware is required to support a) Add support for additional ampdu streams b) Handle corresponding watchdog events to destroy ampdu streams Bumping firmware API version by one. Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-08mwl8k: Handle watchdog event with highest prioriryYogesh Ashok Powar1-0/+19
Currently, command path waits till all the tx host queues are empty. Whenever watchdog event is raised, firmware expects driver to destroy ampdu queues immediately. This requires corresponding commands i.e. mwl8k_cmd_get_watchdog_bitmap and mwl8k_destroy_ba to be sent without waiting for the tx queues to be completely empty. Use "watchdog_event_pending" to ensure the above mentioned two commands are sent down immediately. Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-08mwl8k: Handle Watchdog events for the new ampdu streamsYogesh Ashok Powar1-12/+32
With more ampdu streams, we need to handle watchdog events for the new ampdu streams. Handle these events appropriately. Earlier mwl8k_cmd_get_watchdog_bitmap used to return only one stream index and hence bitwise operations on the return value were not required. Now the function returns a bitmap with different bits are mapped with different stream indices. Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>