summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mwifiex
AgeCommit message (Collapse)AuthorFilesLines
2012-11-26cfg80211: remove remain-on-channel channel typeJohannes Berg4-16/+6
As mwifiex (and mac80211 in the software case) are the only drivers actually implementing remain-on-channel with channel type, userspace can't be relying on it. This is the case, as it's used only for P2P operations right now. Rather than adding a flag to tell userspace whether or not it can actually rely on it, simplify all the code by removing the ability to use different channel types. Leave only the validation of the attribute, so that if we extend it again later (with the needed capability flag), it can't break userspace sending invalid data. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-30cfg80211: allow per interface TX power settingJohannes Berg1-0/+1
The TX power setting is currently per wiphy (hardware device) but with multi-channel capabilities that doesn't make much sense any more. Allow drivers (and mac80211) to advertise support for per-interface TX power configuration. When the TX power is configured for the wiphy, the wdev will be NULL and the driver can still handle that, but when a wdev is given the TX power can be set only for that wdev now. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-30Merge branch 'master' of ↵John W. Linville2-10/+10
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/mwifiex/cfg80211.c
2012-10-29mwifiex: rx path enhancement to derive priv only onceAvinash Patil6-58/+32
We derive mwifiex_private structure which is per interface from received skb's rx_info. Once priv is derived, same priv can be propagated to other functions instead of callee deriving priv from rx_info again. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-29mwifiex: handle extended supported rates IE for APAvinash Patil1-1/+10
During start_ap handler, some rates come as extended supported rates IE - part of beacon tail IE. This patch adds support for parsing them and adding to bss_rates TLV for bss_start command to firmware. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-29Revert "mwifiex: retrieve correct max_power information in reg_notifier handler"Amitkumar Karwar1-3/+3
This reverts commit 34202e28fe7fc8551313f9a035a8857db83de757 We made "34202ee.." because we didn't support custom regulatory rules at that time. But now we use our own custom regulatory rules, so it needs to be changed back. Also, chan->max_power calculations in cfg80211 were broken. Hence we started using chan->max_reg_power. Now it has got fixed in following commit. commit 5e31fc0815a4e2c72b1b495fe7a0d8f9bfb9e4b4 Author: Stanislaw Gruszka <sgruszka@redhat.com> Date: Tue Jul 24 08:35:39 2012 +0200 wireless: reg: restore previous behaviour of chan->max_power calculations Hence we will use chan->max_power instead of chan->max_reg_power. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-29mwifiex: disable channel filtering for SSID specific scan from userAmitkumar Karwar1-0/+5
If MWIFIEX_DISABLE_CHAN_FILT bit in scan mode bitmap is set, firmware will turn off the filtering of scan responses from adjacent channels. Currently the bit is set only for internal SSID specific scan performed during association. We will set it for user requested SSID specific scan as well. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-29mwifiex: minor cleanup and a fix in scan semaphore usageAmitkumar Karwar5-20/+1
mwifiex_request_scan() takes care of synchronous internal scan performed by driver during association. Currently the semaphore acquired for the scan is unnecessarily released at the end of different paths. Also, failure paths returning error code other than "-1" are not considered. We will release it at the end of routine to fix above issues. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-29mwifiex: abort scan upon interface downAmitkumar Karwar4-10/+42
When the interface is down, we will abort scan by calling cfg80211_scan_done() with abort option. This fixes WARN_ON triggered by cfg80211 in wdev_cleanup_work(). Driver's internal variables/flags are cleared once we get response for current scan command. Meanwhile we will block new scan request from cfg80211. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-29mwifiex: use LOW_PRIORITY scan flag provided in scan requestAmitkumar Karwar2-3/+9
We will delay/abort scan operation based on traffic for low priority scan. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-24mwifiex: clean up scan state on errorBing Zhao1-2/+5
De-reference and deallocate scan state on failure. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Paul Stewart <pstew@chromium.org> Tested-by: Paul Stewart <pstew@chromium.org> Reviewed-by: Ryan Cairns <rtc@chromium.org> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-24mwifiex: return -EBUSY if specific scan request cannot be honoredBing Zhao1-8/+5
Previous patch "mwifiex: return -EBUSY if scan request cannot.." corrected regular scan request only. There is another case for specific scan that needs the same handling. Also, removed !req_ssid check as it has already been validated by caller. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Paul Stewart <pstew@chromium.org> Reviewed-by: Ryan Cairns <rtc@chromium.org> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-19mwifiex: Using %*phD instead of print_hex_dump_bytesAndrei Emeltchenko1-12/+12
Make output more readable and remove unneeded function call. ... mwifiex_sdio mmc0:0001:1: last_cmd_index = 3 last_cmd_id: 00000000: 16 00 cd 00 83 00 df 00 28 00 ........(. ... would be changed to: ... mwifiex_sdio mmc0:0001:1: last_cmd_index = 3 mwifiex_sdio mmc1:0001:1: last_cmd_id: 16 00 cd 00 83 00 df 00 28 00 ... Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-19mwifiex: use sizeof(array) to print_hex_dump_bytesBing Zhao2-6/+7
DBG_CMD_NUM is the number of commands, not the actual bytes of data for printing. Also remove the duplicated DBG_CMD_NUM definition. Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-18wireless: drivers: make use of WLAN_EID_VENDOR_SPECIFICArend van Spriel2-7/+10
The include file linux/ieee80211.h contains three definitions for the same thing in enum ieee80211_eid due to historic changes: /* Information Element IDs */ enum ieee80211_eid { : WLAN_EID_WPA = 221, WLAN_EID_GENERIC = 221, WLAN_EID_VENDOR_SPECIFIC = 221, : }; The standard refers to this as "vendor specific" element so the other two definitions are better not used. This patch changes the wireless drivers to use one definition, ie. WLAN_EID_VENDOR_SPECIFIC. Cc: Jouni Malinen <j@w1.fi> Cc: Dan Williams <dcbw@redhat.com> Cc: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Kalle Valo <kvalo@qca.qualcomm.com> [ath6kl] Acked-by: Bing Zhao <bzhao@marvell.com> [mwifiex] Acked-by: Stanislav Yakovlev <stas.yakovlev@gmail.com> [ipw2x00] Signed-off-by: Arend van Spriel <arend@broadcom.com> [change libipw as well] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-18wireless: use OR operation to set wiphy featuresJohannes Berg1-2/+2
The next patch will introduce a flag that is set by default in cfg80211 so drivers and mac80211 need to use |= to set features they have so that they don't clear the already-set feature. We could set the flag in wiphy_register() instead of wiphy_new() to avoid this patch, but then the drivers couldn't *unset* flags they don't want to use even though the implementation is generic. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-08mwifiex: update cfg80211 with correct reason code when connection is lostAmitkumar Karwar4-16/+27
Driver gets LINK_LOST, DEAUTHENTICATED and DISASSOCIATED events from firmware when connection is lost in different scenarios. Currently we are using common code WLAN_REASON_DEAUTH_LEAVING for these cases. This patch adds support to parse an actual reason code from firmware event body and send it to cfg80211. WLAN_REASON_DEAUTH_LEAVING code is used if deauth is initiated by our device. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-08mwifiex: update cfg80211 with correct reason code when association failsAmitkumar Karwar2-5/+16
This patch adds support to send correct reason code got from firmware when association attempt fails. Also, the error message displayed for association failure due to network incompatibility is modified. Current message "cannot find ssid.." misleads user. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-08mwifiex: reset scan_processing flag in failure casesAmitkumar Karwar1-6/+10
scan_processing flag should be reset when scan request is failed due to some reasons Ex. memory allocation failure etc. Otherwise further scan requests will be blocked. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-08mwifiex: return -EBUSY if scan request cannot be honoredBing Zhao2-12/+16
There are cases we cannot scan when request is received. For example, during WPA group key negociation the scan request will be blocked. We should return an error code to cfg80211 because cfg80211_scan_done will never be called. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Paul Stewart <pstew@chromium.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: convert to use le16_add_cpu()Wei Yongjun1-3/+2
Convert cpu_to_le16(le16_to_cpu(E1) + E2) to use le16_add_cpu(). dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: enhance RX reordering to avoid packet drop during host sleepAvinash Patil4-8/+49
Once hostsleep is activated, this patch takes care of not dropping packets in RX reorder table. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: add inactivity deauth support for apKevin Gan4-1/+39
The firmware has support for this feature, so we offload it to firmware. In start_ap, driver passes the inactivity timeout value to firmware via TLVs and firmware will report STA_DEAUTH event to driver when inactivity timer is fired. Signed-off-by: Kevin Gan <ganhy@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: set txpd when send a mgmt frame for AP and GO modeStone Piao1-0/+9
Set packet type and packet offset in txpd when send a mgmt frame in AP and GO mode. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Kevin Gan <ganhy@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: parse P2P IEs from beacon_dataStone Piao1-32/+54
Parse P2P IEs and set them to FW with related masks. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: add support for P2P GO in interface type changeStone Piao6-3/+90
When cfg80211 calls to change interface type for P2P GO, send P2P mode config commands to firmware and set bss role and bss mode accordingly. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: add support for P2P client in interface type changeStone Piao4-0/+95
When cfg80211 calls to change interface type for P2P client, send P2P mode config commands to firmware. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: add P2P interfaceStone Piao3-2/+47
Due to firmware design, driver needs to add a default P2P interface to implement find phase and action frame handshake. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: send firmware initialization commands synchronouslyStone Piao1-32/+33
The driver will send some commands to firmware during the initialization. Currently these commands are sent asynchronously, which means that we firstly insert all of them to a pre-allocated command queue, and then start to process them one by one. The command queue will soon be exhausted if we keep adding new initialization commands. This issue can be resolved by sending initialization commands synchronously because each command is consumed and the buffer is recycled before queuing next command. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: append each IE into a seperate IE bufferStone Piao1-4/+9
When scan is triggered from cfg80211, the request contains some IEs and we should parse all the IEs and append each IE into a seperate IE buffer. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: process remain on channel expired eventStone Piao2-0/+13
Process remain on channel expired event, and notify cfg80211. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: implement remain_on_channel and cancel_remain_on_channelStone Piao8-6/+163
Add a new command to implement remain_on_channel and cancel_remain_on_channel. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: report received management frames to cfg80211Stone Piao6-0/+58
Process the management frames received from firmware and report them to cfg80211. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Kevin Gan <ganhy@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: implement cfg80211 mgmt_frame_register handlerStone Piao5-0/+40
Add a new command to implement mgmt_frame_register. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: advertise mgmt_stype to cfg80211Stone Piao1-0/+30
Advertise supported management frame types to cfg80211. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: implement cfg80211 mgmt_tx handlerStone Piao6-17/+143
Implement mgmt_tx in cfg80211 ops through data path. Advertise probe resp offload and skip to send probe resp in AP or GO mode. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: fix coding style issueStone Piao2-4/+1
Remove unnecessary blank lines and extra tab. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-25mwifiex: potential corruption in mwifiex_update_uap_custom_ie()Dan Carpenter1-1/+1
ap_custom_ie is a struct mwifiex_ie_list which is quite different and also larger than struct mwifiex_ie. It's a difference between 4196 bytes and 262. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Stone Piao <piaoyun@marvell.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-25Merge branch 'for-john' of ↵John W. Linville2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2012-09-24mwifiex: block scan request during heavy Tx trafficAmitkumar Karwar2-0/+8
Currently scan operation is delayed/aborted based on Tx traffic consistency. This decision is taken after receiving scan response of first scan command from FW. But when heavy traffic is running, we can not even afford to send first scan command and go off channel for 30msec. We will block scan request in this case. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24mwifiex: disconnect the device before entering suspend stateAmitkumar Karwar1-0/+13
By default, device is disconnected before entering suspend state. User can keep the connection alive by using module parameter "disconect_on_suspend=0". Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24mwifiex: fix issue in resumed scan operationAmitkumar Karwar1-0/+1
When delayed scan operation is resumed, we just add next scan command in queue but don't wakeup main thread to process the command. Hence the command is downloaded to firmware only after waking up the main thread by any other means. This bug which was introduced after "mwifiex: improve scan delay logic.." patch is fixed here. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-19cfg80211: constify name parameter to add_virtual_intfJohannes Berg2-2/+2
The name can't be modified by the driver, make it const. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-11mwifiex: separate TxPD processing routine for APAvinash Patil3-1/+76
This patch adds separate tx packet descriptor routine for AP interface. This function fills bss_type, bss_num, wmm packet delay information etc for TxPD going on AP interface. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11mwifiex: disable WOW by defaultBing Zhao1-1/+1
Some platforms do not support WOW. Let's change the default wakeup criteria to 0. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11mwifiex: support custom world regulatory domainAmitkumar Karwar1-1/+34
country 00 (world regulatory domain) doesn't define channels 52 - 64 and 100 - 140. Add these channels to our custom world regulatory domain. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11mwifiex: do not hint regulatory domain with f/w country codeBing Zhao1-2/+3
We will use world regulatory domain (country 00) as default when driver is loaded. Later after a successful association cfg80211 will change the regulatory domain to a specific country if the AP has advertised country IE. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11mwifiex: use country ie of requested AP while associatingAmitkumar Karwar2-1/+40
AP's country ie is parsed and 11d information is updated in firmware while associating. Previous mwifiex_send_domain_info_cmd_fw() call in association path is not necessary now. Hence it is removed in this patch. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11mwifiex: update adapter->bss_prio_tbl[j].bss_prio_cur correctlyAmitkumar Karwar1-5/+4
"adapter->bss_prio_tbl[j].bss_prio_head" points to linked list of interfaces with priority 'j'. "bss_prio_tbl[j].bss_prio_cur" is supposed to point to next interface every time the routine for dequeuing the packet is called. This ensures that each interface gets fair chance. Currently we have AP and station interfaces with priority '0'. Therefore "adapter->bss_prio_tbl[0].bss_prio_cur" should alternately point to AP and station nodes. Since "bss_prio_cur" is not correctly updated, for each packet picked for AP, two packets are picked for station interface. This patch fixes the problem by correctly updating "bss_prio_cur". Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11mwifiex: have same priority for AP and station trafficAmitkumar Karwar2-3/+2
Currently AP interface has higher priority over station. Hence separate entries are created in "adapter->bss_prio_tbl" for these interfaces and station packet is dequeued only if there is not packet in queue for AP. It is observed that ping for station interface doesn't work if heavy traffic is running on AP. The problem is fixed by having same priority for both the interfaces. This patch also removes an extra initialisation for "priv->bss_priority". Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-08 02:15:38 +0300