summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mwifiex/fw.h
AgeCommit message (Collapse)AuthorFilesLines
2013-12-10mwifiex: declare snap_type as __be16 variableAmitkumar Karwar1-1/+1
Actually we are updating snap_type with h_proto (__be16 variable) in ethernet frame header. Hence endianness conversion is not required. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-10mwifiex: use little-endian variables in firmware structuresUjjal Roy1-14/+14
The firmware expects the command structure members in little endianness. Signed-off-by: Ujjal Roy <royujjal@gmail.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-11mwifiex: replace u16 with __le16 in struct mwifiex_types_power_groupAmitkumar Karwar1-2/+2
__le16 to u16 conversion is missing for "pg_tlv_hdr->length" in mwifiex_get_power_level(). This creates a problem on big endian machines. It is resolved by changing definition of the structure and making required endianness changes. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-26mwifiex: fix ext_capab IE structure definitionAvinash Patil1-1/+1
EXT_CAPAB_IE format involves IEEE header followed by bytestream of capabilities. Current structure has incorrect member u8 for data; fix it by defining it as u8[0]. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09mwifiex: add packet coalesce supportAmitkumar Karwar1-0/+24
Coalesce filters are configured in firmware based on settings received from cfg80211. Packet type which is required by firmware is determined based on provided patterns in a rule: Unicast: if pattern '01' with offset 0 is found Multicast: if pattern '33:33' or '01:00:5e' with offset 0 is found Broadcast: if pattern 'ff:ff:ff:ff' with offset 0 is found Some example coalesce configuration files: 1) Coalesce Rx data packets from 192.168.0.88 mac address of our device is 00:50:43:21:53:7A Source IP address offset comes out as 52 after following calculations: 32 bytes of HW 802.11 header + 8 bytes LLC + 12 bytes in IPV4 header till source IP address Destination mac is at offset 6 in HW header. delay=100 condition=1 patterns=01,6+00:50:43:22,10+53:7A,52+c0:a8:00:58 2) Coalesce all broadcast and multicast packets(Multiple packet types are not allowed in a single rule. Hence created separate rules) delay=400 condition=1 patterns=33:33 delay=400 condition=1 patterns=ff:ff:ff:ff Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09mwifiex: increase max supported pattern offsetAmitkumar Karwar1-1/+1
The offset number is increased to accomodate requests from user to match more fields in a Rx packet. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: remove duplicate structure host_cmd_tlvAmitkumar Karwar1-23/+18
We already have 'struct mwifiex_ie_types_header' with same definition. Hence host_cmd_tlv is removed in this patch. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: reduce firmware poll retriesAmitkumar Karwar1-3/+0
After downloading the firmware, firmware status is checked by reading a register. Polling interval is 100 msecs. Therefore 100 retries means the status is checked for 10 secs which is more than sufficient for firmware to get ready. This patch removes 1000 retries macro usage, because 100secs time is not practical. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-19mwifiex: channel switch handling for stationAmitkumar Karwar1-0/+2
After receiving channel switch announcement from AP, scan and association on that channel is blocked for DFS_CHAN_MOVE_TIME (10 seconds). Hence station will be able to connect to the AP, once it is moved to new channel. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Paul Stewart <pstew@chromium.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-19mwifiex: add basic 11h support for stationAmitkumar Karwar1-0/+14
This patch adds code to parse requested AP's 11h capabilities and add 11h information in association request. Also, deauth is sent to the AP after receiving channel switch announcement event from firmware. This happens when AP advertises WLAN_EID_CHANNEL_SWITCH IE in it's beacon. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Paul Stewart <pstew@chromium.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22mwifiex: add calibration data download featureAmitkumar Karwar1-0/+10
User can provide a text file containing calibration data in hex format while loading mwifiex module. It will be downloaded to firmware. eg. insmod mwifiex.ko cal_data_cfg=cal_data.conf Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22mwifiex: add del_station handlerAvinash Patil1-0/+7
This patch adds cfg80211 del_station handler for mwifiex. If bss is not started or there are no stations in associated stations list, no action is taken. If argument received is null/broadcast mac, all stations in associated station list are deauthenticated. Patch also deletes related RxReorder stream and TxBA stream tables for related station. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-26mwifiex: add support to configure VHT for AP modeYogesh Ashok Powar1-0/+11
Currently, default VHT configuration from the firmware is used for the VHT operations. Adding vhtcfg command to configure the firmware based on input received from cfg. Enable VHT for AP mode only when cfg80211_ap_settings has a VHT IE i.e., when ieee80211ac is set to 1 in the hostapd.conf. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-19mwifiex: cleanup VHT capYogesh Ashok Powar1-28/+0
Firmware returned VHT cap has the same format that cfg80211 expects. There is no need to parse the vht cap from the firmware and then set it to ieee80211_sta_vht_cap. Just copying is sufficient. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-07mwifiex: add WOWLAN supportAmitkumar Karwar1-0/+32
Currently 'magic-packet' and 'patterns' options in 'iw wowlan' command are supported. Appropriate packet filters for wowlan are configured in firmware based on provided patterns and/or magic-packet option. For examples, wake-on ARP request for 192.168.0.100: iw phy0 wowlan enable patterns ff:ff:ff:ff:ff:ff 20+08:06 46+c0:a8:00:64 wake-on RX packets sent from IP address 192.168.0.88: iw phy0 wowlan enable patterns 34+c0:a8:00:58 wake-on RX packets with TCP destination port 80 iw phy0 wowlan enable patterns 44+50 wake-on MagicPacket: iw phy0 wowlan enable magic-packet wake-on MagicPacket or patterns: iw phy0 wowlan enable magic-packet patterns 12+00:11:22:33:44:55 18+00:50:43:21 wake-on IPv4 multicast packets: iw phy0 wowlan enable patterns 01:00:5e wake-on IPv6 multicast packets: iw phy0 wowlan enable patterns 33:33 disable all wowlan options iw phy0 wowlan disable Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-07mwifiex: add "ethtool wol" command supportAmitkumar Karwar1-0/+4
Host sleep wakeup condition is configured using this command. Supports Wake-on: pumb For examples: wake-on any unicast packets: ethtool -s mlan0 wol u wake-on multicast/broadcast packet: ethtool -s mlan0 wol mb wake-on unicast packets and MAC events: ethtool -s mlan0 wol pu wake-on unicast/multicast/broadcast packets and MAC events: ethtool -s mlan0 wol pmbu disable all wake-on options: ethtool -s mlan0 wol d Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-07mwifiex: shorten the host sleep configuration macro namesAmitkumar Karwar1-4/+4
As we are adding a few more macros in this category in next patch, this cleanup work is required. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-19mwifiex: add 802.11AC supportYogesh Ashok Powar1-8/+119
For STA mode, collect VHT realated IEs from the Beacons or Probe Responses and append similar VHT related IEs to association requests. For AP mode, get VHT related capability information and share it with cfg80211 at the time of wiphy register. This information is further used by cfg80211 and hostapd to start an AP with 802.11AC support. Currently only 8897 supports 802.11AC. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-23mwifiex: correction in status codes used for association failureAmitkumar Karwar1-0/+3
When AP responds with appropriate status code, we forward that code correctly to cfg80211. But sometimes when there is no response from AP, our firmware uses proprietary status codes. We will map authentication timeout to WLAN_STATUS_AUTH_TIMEOUT and other proprietary codes to WLAN_STATUS_UNSPECIFIED_FAILURE. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-08mwifiex: parse WMM IEs from hostapd for mwifiex APAvinash Patil1-6/+5
This patch adds support for parsing WMM IEs from hostapd and setting them to FW via sys configure command. Patch also sets wiphy flag to advertise AP uAPSD support. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-30mwifiex: advertise GreenField, 40MHz intolerance support to cfg80211Avinash Patil1-0/+2
This patch adds support for advertising GreenField, 40MHz intolerance or LDPC coding support to cfg80211. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: add inactivity deauth support for apKevin Gan1-0/+7
The firmware has support for this feature, so we offload it to firmware. In start_ap, driver passes the inactivity timeout value to firmware via TLVs and firmware will report STA_DEAUTH event to driver when inactivity timer is fired. Signed-off-by: Kevin Gan <ganhy@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: add support for P2P GO in interface type changeStone Piao1-0/+1
When cfg80211 calls to change interface type for P2P GO, send P2P mode config commands to firmware and set bss role and bss mode accordingly. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: add support for P2P client in interface type changeStone Piao1-0/+14
When cfg80211 calls to change interface type for P2P client, send P2P mode config commands to firmware. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: process remain on channel expired eventStone Piao1-0/+1
Process remain on channel expired event, and notify cfg80211. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: implement remain_on_channel and cancel_remain_on_channelStone Piao1-0/+12
Add a new command to implement remain_on_channel and cancel_remain_on_channel. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: report received management frames to cfg80211Stone Piao1-0/+1
Process the management frames received from firmware and report them to cfg80211. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Kevin Gan <ganhy@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: implement cfg80211 mgmt_frame_register handlerStone Piao1-0/+7
Add a new command to implement mgmt_frame_register. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11mwifiex: disable WOW by defaultBing Zhao1-1/+1
Some platforms do not support WOW. Let's change the default wakeup criteria to 0. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07mwifiex: parse rate info for APAvinash Patil1-0/+6
This patch adds support for parsing rates from cfg80211_ap_settings of start_ap handler. This in turn adds support for 11a and 11b phy configurations. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06mwifiex: add AES_CMAC support in key_material cmdYing Luo1-0/+9
The sequence counter will be sent to firmware via key_material command. Signed-off-by: Ying Luo <luoy@marvell.com> Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06mwifiex: improve uAP RX handlingAvinash Patil1-0/+25
1. Separate file for uAP RX handling. 2. If received packet is broadcast/multicast, send it to kernel as well as requeue it back to uAP TX queue. 3. If received packet is for associated STA (intra-BSS), requeue it back to uAP TX queue. 4. In all other cases (packets for AP or inter-BSS packets), pass packet to kernel to handle it accordingly. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06mwifiex: do le_to_cpu conversion for Rx packet header elementsAmitkumar Karwar1-4/+4
We do similar conversion for Tx packet header but it was missing for Rx packet header. Without this fix, Rx packet header won't be correctly parsed on big endian platform. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-17mwifiex: remove redundant code in set channel pathAmitkumar Karwar1-10/+0
1) Recently we removed set_channel cfg80211 handler. Also, cfg80211 blocks ibss connection requests if ibss network is already started /joined. Hence the code to restart ibss network in new channel (mwifiex_drv_change_adhoc_chan() function) becomes redundant. 2) mwifiex_bss_set_channel() function is redundant. It does some error checking and calculate adhoc start band and adhoc channel. Cfg80211 already takes care of error checking and provides correct channel information to the driver. Adhoc start band is already calculated in mwifiex_set_rf_channel() function. Other associated code is also removed in this patch. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-10mwifiex: add set_antenna handler supportAmitkumar Karwar1-0/+21
This enables user to set mode of Tx/Rx path using "iw set antenna" command. For non MIMO chips, the command will be used for selecting specific antenna or configuring antenna diversity mode. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-28mwifiex: use correct firmware command to get power limitsAmitkumar Karwar1-0/+9
"priv->max_tx_power_level" and "priv->min_tx_power_level" variables are initialized to maximum and minimum power levels supported by hardware by sending correct firmware command. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-20mwifiex: support for WEP in AP modeAvinash Patil1-0/+8
This patch adds support for WEP open/shared encryption in AP mode. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-20mwifiex: set HT capability based on cfg80211_ap_settingsAvinash Patil1-0/+6
Parse HT IE from cfg80211 and set HT capabilities accordingly to FW. If HT IE is missing, 11n would be disabled in FW. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-06mwifiex: support NL80211_HIDDEN_SSID_ZERO_LEN for uAPAvinash Patil1-0/+6
mwifiex uAP supports NL80211_HIDDEN_SSID_ZERO_LEN type of hidden SSID only. NL80211_HIDDEN_SSID_ZERO_CONTENTS is not supported. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: retrieve IEs from cfg80211_beacon_data and send to firmwareAvinash Patil1-0/+7
This patch adds logic for setting tail beacon IE, probe response IE and assoc response IE from cfg80211_ap_settings parameter of start_ap handler into FW. RSN IE is also retrieved from tail IE buffer and sent to firmware. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: add custom IE frameworkAvinash Patil1-0/+17
1. support for setting custom IE from application hostapd etc. Custom IE addition using auto-indexing and Custom IE deletion using static indices (which are allocated during IE addition and stored in driver) are supported. 2. Separate file for handling IE related execution. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: rearrange AP sys configure codeAvinash Patil1-0/+2
This patch takes into account AP config_type (bss config/custom ie config) while preparing AP sys_configure command buffer. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: add WPA2 support for APAvinash Patil1-0/+53
1. Support for parsing security related parameters from cfg80211_ap_settings in start_ap cfg80211 handler 2. Conversion of these security information into FW understandle TLVs and setting into FW thru sys_config command 3. key management is done on host. This ensures that FW forwards EAPOL key packets to host instead of processing on its own. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: add AP event handling frameworkAvinash Patil1-1/+17
Added logic to handle AP event that are generated by the firmware. As MLME/SME is implemented in the firmware, events such as station association and deauthentication, must be sent to userspace (hostapd) for creating and deleting station database. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: add cfg80211 start_ap and stop_ap handlersAvinash Patil1-0/+18
1. add start AP and stop AP handlers 2. support for parsing ssid, beacon period, DTIM period from beacon_parameters structure and setting it to FW. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: common set_wiphy_params cfg80211 handler for AP and STA interfaceAvinash Patil1-0/+18
Add support for setting fragmentation threshold, RTS threshold and retry limit. Since wiphy parameters are properties of physical device, appropriate function to set phy parameters is invoked depending upon bss_type(STA or AP) for each virtual interface. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: add AP command sys_config and set channelAvinash Patil1-0/+12
1. support for AP sys_config command and added parsing of channel information. 2. support for setting AP channel from cfg80211 set_channel handler Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: add bss start and bss stop commands for APAvinash Patil1-0/+3
1. separate file for preparing uAP command buffer 2. definition of bss_start and bss_stop commands being sent to firmware Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: append peer mac address TLV in key material command to firmwareAvinash Patil1-0/+11
Modify key related cfg80211 handlers to copy peer mac address for pairwise keys. If peer mac address is not present or group keys, it will be sent as broadcast mac address. This would be required since hostapd downloads per peer PTK. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-09mwifiex: fix static checker warningsAmitkumar Karwar1-2/+1
"oui_type" in structure "ieee_types_vendor_header" is not used separately, so include it in "oui" array. Now complete oui will be compared fixing following warnings. drivers/net/wireless/mwifiex/sta_ioctl.c:1410 mwifiex_set_gen_ie_helper() error: memcmp() 'pvendor_ie->oui' too small (3 vs 4) drivers/net/wireless/mwifiex/sta_ioctl.c:1435 mwifiex_set_gen_ie_helper() error: memcmp() 'pvendor_ie->oui' too small (3 vs 4) drivers/net/wireless/mwifiex/scan.c:1177 mwifiex_update_bss_desc_with_ie() error: memcmp() 'vendor_ie->vend_hdr.oui' too small (3 vs 4) drivers/net/wireless/mwifiex/scan.c:1185 mwifiex_update_bss_desc_with_ie() error: memcmp() 'vendor_ie->vend_hdr.oui' too small (3 vs 4) Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-04 07:52:16 +0300