summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek
AgeCommit message (Collapse)AuthorFilesLines
2023-09-23Fix nomenclature for USB and PCI wireless devicesAlan Stern7-9/+9
[ Upstream commit 5d7cf67f72ae34d38e090bdfa673da4aefe4048e ] A mouse that uses a USB connection is called a "USB mouse" device (or "USB mouse" for short), not a "mouse USB" device. By analogy, a WiFi adapter that connects to the host computer via USB is a "USB wireless" device, not a "wireless USB" device. (The latter term more properly refers to a defunct Wireless USB specification, which described a technology for sending USB protocol messages over an ultra wideband radio link.) Similarly for a WiFi adapter card that plugs into a PCIe slot: It is a "PCIe wireless" device, not a "wireless PCIe" device. Rephrase the text in the kernel source where the word ordering is wrong. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/57da7c80-0e48-41b5-8427-884a02648f55@rowland.harvard.edu Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23mt76: mt7921: don't assume adequate headroom for SDIO headersMatt Whitlock1-0/+4
[ Upstream commit 98c4d0abf5c478db1ad126ff0c187dbb84c0803c ] mt7921_usb_sdio_tx_prepare_skb() calls mt7921_usb_sdio_write_txwi() and mt7921_skb_add_usb_sdio_hdr(), both of which blindly assume that adequate headroom will be available in the passed skb. This assumption typically is satisfied when the skb was allocated in the net core for transmission via the mt7921 netdev (although even that is only an optimization and is not strictly guaranteed), but the assumption is sometimes not satisfied when the skb originated in the receive path of another netdev and was passed through to the mt7921, such as by the bridge layer. Blindly prepending bytes to an skb is always wrong. This commit introduces a call to skb_cow_head() before the call to mt7921_usb_sdio_write_txwi() in mt7921_usb_sdio_tx_prepare_skb() to ensure that at least MT_SDIO_TXD_SIZE + MT_SDIO_HDR_SIZE bytes can be pushed onto the skb. Without this fix, I can trivially cause kernel panics by bridging an MT7921AU-based USB 802.11ax interface with an Ethernet interface on an Intel Atom-based x86 system using its onboard RTL8169 PCI Ethernet adapter and also on an ARM-based Raspberry Pi 1 using its onboard SMSC9512 USB Ethernet adapter. Note that the panics do not occur in every system configuration, as they occur only if the receiving netdev leaves less headroom in its received skbs than the mt7921 needs for its SDIO headers. Here is an example stack trace of this panic on Raspberry Pi OS Lite 2023-02-21 running kernel 6.1.24+ [1]: skb_panic from skb_push+0x44/0x48 skb_push from mt7921_usb_sdio_tx_prepare_skb+0xd4/0x190 [mt7921_common] mt7921_usb_sdio_tx_prepare_skb [mt7921_common] from mt76u_tx_queue_skb+0x94/0x1d0 [mt76_usb] mt76u_tx_queue_skb [mt76_usb] from __mt76_tx_queue_skb+0x4c/0xc8 [mt76] __mt76_tx_queue_skb [mt76] from mt76_txq_schedule.part.0+0x13c/0x398 [mt76] mt76_txq_schedule.part.0 [mt76] from mt76_txq_schedule_all+0x24/0x30 [mt76] mt76_txq_schedule_all [mt76] from mt7921_tx_worker+0x58/0xf4 [mt7921_common] mt7921_tx_worker [mt7921_common] from __mt76_worker_fn+0x9c/0xec [mt76] __mt76_worker_fn [mt76] from kthread+0xbc/0xe0 kthread from ret_from_fork+0x14/0x34 After this fix, bridging the mt7921 interface works fine on both of my previously problematic systems. [1] https://github.com/raspberrypi/firmware/tree/5c276f55a4b21345cd4d6200a504ee991851ff7a Link: https://github.com/openwrt/openwrt/issues/11796 Signed-off-by: Matt Whitlock <kernel@mattwhitlock.name> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mt76: mt7915: fix power-limits while chan_switchRyder Lee1-1/+2
[ Upstream commit 6c0570bc21ec2073890aa252c8420ca7bec402e4 ] If user changes the channel without completely disabling the interface the txpower_sku values reported track the old channel the device was operating on. If user bounces the interface the correct power tables are applied. mt7915_sku_group_len array gets updated before the channel switch happens so it uses data from the old channel. Fixes: ecb187a74e18 ("mt76: mt7915: rework the flow of txpower setting") Fixes: f1d962369d56 ("mt76: mt7915: implement HE per-rate tx power support") Reported-By: Chad Monroe <chad.monroe@smartrg.com> Tested-by: Chad Monroe <chad.monroe@smartrg.com> Signed-off-by: Allen Ye <allen.ye@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mt76: mt7915: fix tlv length of mt7915_mcu_get_chan_mib_infoRyder Lee1-1/+1
[ Upstream commit 4f1875c288dfc1ccea81fc17fef1d30c9d8498b2 ] Correct per-device TLV lengths to avoid invalid operation in firmware. ( 64.040375:28:STATS-E)statsGetSingleHWCounter: MIB counter index = 65472 not supported. This happens on mt7916/mt7986. Fixes: b0bfa00595be ("wifi: mt76: mt7915: improve accuracy of time_busy calculation") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mt76: testmode: add nla_policy for MT76_TM_ATTR_TX_LENGTHLin Ma1-0/+1
[ Upstream commit 74f12d511625e603fac8c0c2b6872e687e56dd61 ] It seems that the nla_policy in mt76_tm_policy is missed for attribute MT76_TM_ATTR_TX_LENGTH. This patch adds the correct description to make sure the u32 val = nla_get_u32(tb[MT76_TM_ATTR_TX_LENGTH]); in function mt76_testmode_cmd() is safe and will not result in out-of-attribute read. Fixes: f0efa8621550 ("mt76: add API for testmode support") Signed-off-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mt76: mt7915: remove VHT160 capability on MT7915Felix Fietkau1-1/+0
[ Upstream commit 3ec5ac12ac8a4e6b1e085374325a5fbd1b650fd5 ] The IEEE80211_VHT_CAP_EXT_NSS_BW value already indicates support for half-NSS 160 MHz support, so it is wrong to also advertise full 160 MHz support. Fixes: c2f73eacee3b ("wifi: mt76: mt7915: add back 160MHz channel width support for MT7915") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mt76: mt7915: fix capabilities in non-AP modeFelix Fietkau3-12/+50
[ Upstream commit 02a894046d5ab7d0010f39ea54fde7e167919d04 ] Capabilities in vif->bss_conf are only initialized in AP mode. For other modes, they should be enabled by default, in order to avoid a mismatch. Fixes: 885f7af7e544 ("wifi: mt76: mt7915: remove mt7915_mcu_beacon_check_caps()") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mt76: mt7915: fix command timeout in AP stop periodRany Hany1-13/+50
[ Upstream commit c4f0755823045b66484fb53d686f85d3151400f4 ] Due to AP stop improperly, mt7915 driver would face random command timeout by chip fw problem. Migrate AP start/stop process to .start_ap/.stop_ap and congiure BSS network settings in both hooks. The new flow is shown below. * AP start .start_ap() configure BSS network resource set BSS to connected state .bss_info_changed() enable fw beacon offload * AP stop .bss_info_changed() disable fw beacon offload (skip this command) .stop_ap() set BSS to disconnected state (beacon offload disabled automatically) destroy BSS network resource Based on "mt76: mt7921: fix command timeout in AP stop period" Signed-off-by: Rany Hany <rany_hany@riseup.net> Signed-off-by: Felix Fietkau <nbd@nbd.name> Stable-dep-of: 02a894046d5a ("wifi: mt76: mt7915: fix capabilities in non-AP mode") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mt76: mt7996: fix WA event ring sizeStanleyYP Wang2-1/+2
[ Upstream commit 1634de418b3048c5f435b6ffd37f75943c554c04 ] Fix rx ring size of WA event to get rid of event loss and queue overflow problems. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mt76: mt7996: use correct phy for background radar eventStanleyYP Wang1-1/+5
[ Upstream commit 9ffe0d5690ed916e09baad2cc9ee7ec65b110038 ] If driver directly uses the band_idx reported from the radar event to access mt76_phy array, it will get the wrong phy for background radar. Fix this by adjusting the statement. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mt76: mt7996: fix bss wlan_idx when sending bss_info commandPeter Chiu1-2/+3
[ Upstream commit cc945b546227423488fe4be0ab92fd126b703246 ] The bmc_tx_wlan_idx should be the wlan_idx of the current bss rather than peer AP's wlan_idx, otherwise there will appear some frame decryption problems on station mode. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mt76: mt7921: fix non-PSC channel scan failMing Yen Hsieh1-1/+2
[ Upstream commit 0e5911bb7cc92c00dda9b4d635c1266b7ca915c6 ] Due to the scan command may only request legacy bands and PSC channel in 6GHz band, we are unable to scan the APs on non-PSC channel in this case. Enable WIPHY_FLAG_SPLIT_SCAN_6GHZ to support non-PSC channel (obtained during scan on legacy bands) in 6GHz scan request. Fixes: 50ac15a511e3 ("mt76: mt7921: add 6GHz support") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mt76: mt7915: rework tx bytes counting when WED is activePeter Chiu4-31/+16
[ Upstream commit f39d499345dddb8382986fd5a2a0e84a63b1a6d5 ] Concurrent binding/non-binding skbs could be handled anywhere which leads to mixed byte counting, so switch to use PPDU TxS reporting regardless Tx paths when WED is active. Fixes: 43eaa3689507 ("wifi: mt76: add PPDU based TxS support for WED device") Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mt76: mt7915: rework tx packets counting when WED is activePeter Chiu6-14/+79
[ Upstream commit 161a7528e4074d104305fc109c16134b4990070e ] PPDU TxS can only report MPDU count whereas mac80211 requires MSDU scale (NL80211_STA_INFO_TX_PACKETS), so switch to get MSDU counts from WA statistic. Note that mt7915 WA firmware only counts tx_packet for WED path, so driver needs to take care of host path additionally. Fixes: 43eaa3689507 ("wifi: mt76: add PPDU based TxS support for WED device") Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mt76: mt7915: fix background radar event being blockedStanleyYP Wang1-1/+1
[ Upstream commit 9a3994077d170ec9ac75e800932b5671d9940cd2 ] The background radar uses MT_RX_SEL2 as its band indication, so fix it. Fixes: 7a53eecd5c87 (wifi: mt76: mt7915: check the correctness of event data) Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13wifi: mt76: mt7996: fix header translation logicRyder Lee1-4/+9
[ Upstream commit c55b4e788f1dd6ca89cc97cf291d2a03b0b96de1 ] When header translation failure is indicated, the hardware will insert an extra 2-byte field containing the data length after the protocol type field. This happens either when the LLC-SNAP pattern did not match, or if a VLAN header was detected. The previous commit accidentally breaks the logic, so reverts back. Fixes: 27db47ab1f47 (wifi: mt76: mt7996: enable mesh HW amsdu/de-amsdu support) Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-06wifi: mt76: mt7921: fix skb leak by txs missing in AMSDUDeren Wu1-2/+5
commit b642f4c5f3de0a8f47808d32b1ebd9c427a42a66 upstream. txs may be dropped if the frame is aggregated in AMSDU. When the problem shows up, some SKBs would be hold in driver to cause network stopped temporarily. Even if the problem can be recovered by txs timeout handling, mt7921 still need to disable txs in AMSDU to avoid this issue. Cc: stable@vger.kernel.org Fixes: 163f4d22c118 ("mt76: mt7921: add MAC support") Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-06wifi: mt76: mt7921: do not support one stream on secondary antenna onlyDeren Wu1-1/+1
commit d616d3680264beb9a9d2c4fc681064b06f447eeb upstream. mt7921 support following antenna combiantions only. * primary + secondary (2x2) * primary only (1x1) Since we cannot work on secondary antenna only, return error if the antenna bitmap is 0x2 in .set_antenna(). For example: iw phy0 set antenna 3 3 /* valid */ iw phy0 set antenna 1 1 /* valid */ iw phy0 set antenna 2 2 /* invalid */ Cc: stable@vger.kernel.org Fixes: e0f9fdda81bd ("mt76: mt7921: add ieee80211_ops") Suggested-by: Knox Chiou <knoxchiou@google.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-24wifi: mt76: mt7615: do not advertise 5 GHz on first phy of MT7615D (DBDC)Paul Fertser1-3/+3
On DBDC devices the first (internal) phy is only capable of using 2.4 GHz band, and the 5 GHz band is exposed via a separate phy object, so avoid the false advertising. Reported-by: Rani Hod <rani.hod@gmail.com> Closes: https://github.com/openwrt/openwrt/pull/12361 Fixes: 7660a1bd0c22 ("mt76: mt7615: register ext_phy if DBDC is detected") Cc: stable@vger.kernel.org Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230605073408.8699-1-fercerpav@gmail.com
2023-07-07wifi: mt76: mt7921e: fix init command fail with enabled deviceQuan Zhou3-12/+8
For some cases as below, we may encounter the unpreditable chip stats in driver probe() * The system reboot flow do not work properly, such as kernel oops while rebooting, and then the driver do not go back to default status at this moment. * Similar to the flow above. If the device was enabled in BIOS or UEFI, the system may switch to Linux without driver fully shutdown. To avoid the problem, force push the device back to default in probe() * mt7921e_mcu_fw_pmctrl() : return control privilege to chip side. * mt7921_wfsys_reset() : cleanup chip config before resource init. Error log [59007.600714] mt7921e 0000:02:00.0: ASIC revision: 79220010 [59010.889773] mt7921e 0000:02:00.0: Message 00000010 (seq 1) timeout [59010.889786] mt7921e 0000:02:00.0: Failed to get patch semaphore [59014.217839] mt7921e 0000:02:00.0: Message 00000010 (seq 2) timeout [59014.217852] mt7921e 0000:02:00.0: Failed to get patch semaphore [59017.545880] mt7921e 0000:02:00.0: Message 00000010 (seq 3) timeout [59017.545893] mt7921e 0000:02:00.0: Failed to get patch semaphore [59020.874086] mt7921e 0000:02:00.0: Message 00000010 (seq 4) timeout [59020.874099] mt7921e 0000:02:00.0: Failed to get patch semaphore [59024.202019] mt7921e 0000:02:00.0: Message 00000010 (seq 5) timeout [59024.202033] mt7921e 0000:02:00.0: Failed to get patch semaphore [59027.530082] mt7921e 0000:02:00.0: Message 00000010 (seq 6) timeout [59027.530096] mt7921e 0000:02:00.0: Failed to get patch semaphore [59030.857888] mt7921e 0000:02:00.0: Message 00000010 (seq 7) timeout [59030.857904] mt7921e 0000:02:00.0: Failed to get patch semaphore [59034.185946] mt7921e 0000:02:00.0: Message 00000010 (seq 8) timeout [59034.185961] mt7921e 0000:02:00.0: Failed to get patch semaphore [59037.514249] mt7921e 0000:02:00.0: Message 00000010 (seq 9) timeout [59037.514262] mt7921e 0000:02:00.0: Failed to get patch semaphore [59040.842362] mt7921e 0000:02:00.0: Message 00000010 (seq 10) timeout [59040.842375] mt7921e 0000:02:00.0: Failed to get patch semaphore [59040.923845] mt7921e 0000:02:00.0: hardware init failed Cc: stable@vger.kernel.org Fixes: 5c14a5f944b9 ("mt76: mt7921: introduce mt7921e support") Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Juan Martinez <juan.martinez@amd.com> Co-developed-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Message-ID: <39fcb7cee08d4ab940d38d82f21897483212483f.1688569385.git.deren.wu@mediatek.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-15wifi: mt7601u: replace strlcpy() with strscpy()Azeem Shaikh1-1/+1
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). Direct replacement is safe here since DEV_ASSIGN is only used by TRACE macros and the return values are ignored. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89 Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230613003458.3538812-1-azeemshaikh38@gmail.com
2023-06-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-7/+15
Cross-merge networking fixes after downstream PR. Conflicts: net/sched/sch_taprio.c d636fc5dd692 ("net: sched: add rcu annotations around qdisc->qdisc_sleeping") dced11ef84fb ("net/sched: taprio: don't overwrite "sch" variable in taprio_dump_class_stats()") net/ipv4/sysctl_net_ipv4.c e209fee4118f ("net/ipv4: ping_group_range: allow GID from 2147483648 to 4294967294") ccce324dabfe ("tcp: make the first N SYN RTO backoffs linear") https://lore.kernel.org/all/20230605100816.08d41a7b@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-01wifi: mt76: mt7996: fix possible NULL pointer dereference in ↵Lorenzo Bianconi1-7/+12
mt7996_mac_write_txwi() Fix possible NULL pointer dereference on mvif pointer in mt7996_mac_write_txwi routine. Fixes: 15ee62e73705 ("wifi: mt76: mt7996: enable BSS_CHANGED_BASIC_RATES support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/2637628a84f42ad6d7b774e706f041d5b45c8cb5.1685269638.git.lorenzo@kernel.org
2023-05-27wifi: mt76: mt7615: fix possible race in mt7615_mac_sta_pollLorenzo Bianconi1-0/+3
Grab sta_poll_lock spinlock in mt7615_mac_sta_poll routine in order to avoid possible races with mt7615_mac_add_txs() or mt7615_mac_fill_rx() removing msta pointer from sta_poll_list. Fixes: a621372a04ac ("mt76: mt7615: rework mt7615_mac_sta_poll for usb code") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/48b23404b759de4f1db2ef85975c72a4aeb1097c.1684938695.git.lorenzo@kernel.org
2023-05-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-3/+4
Conflicts: drivers/net/ethernet/freescale/fec_main.c 6ead9c98cafc ("net: fec: remove the xdp_return_frame when lack of tx BDs") 144470c88c5d ("net: fec: using the standard return codes when xdp xmit errors") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-12wifi: mt76: connac: fix stats->tx_bytes calculationRyder Lee2-2/+3
The stats->tx_bytes shall subtract retry byte from tx byte. Fixes: 43eaa3689507 ("wifi: mt76: add PPDU based TxS support for WED device") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/b3cd45596943cf5a06b2e08e2fe732ab0b51311b.1682285873.git.ryder.lee@mediatek.com
2023-05-12wifi: mt76: mt7996: fix endianness of MT_TXD6_TX_RATERyder Lee1-1/+1
To avoid sparse warning: sparse: warning: invalid assignment: |= sparse: left side has type restricted __le32 sparse: right side has type unsigned lon Fixes: 15ee62e73705 ("wifi: mt76: mt7996: enable BSS_CHANGED_BASIC_RATES support") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/16fa938373e3b145cb07a2c98d2428fea2abadba.1682285873.git.ryder.lee@mediatek.com
2023-05-05wifi: mt7601u: delete dead code checking debugfs returnsWang Jikai1-2/+0
Smatch reports that: drivers/net/wireless/mediatek/mt7601u/debugfs.c:130 mt7601u_init_debugfs() warn: 'dir' is an error pointer or valid". Debugfs code is not supposed to need error checking so instead of changing this to if (IS_ERR()) the correct thing is to just delete the dead code. Signed-off-by: Wang Jikai <wangjikai@hust.edu.cn> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230421092200.24456-1-wangjikai@hust.edu.cn
2023-04-21Merge tag 'wireless-next-2023-04-21' of ↵Jakub Kicinski71-1029/+1706
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.4 Most likely the last -next pull request for v6.4. We have changes all over. rtw88 now supports SDIO bus and iwlwifi continues to work on Wi-Fi 7 support. Not much stack changes this time. Major changes: cfg80211/mac80211 - fix some Fine Time Measurement (FTM) frames not being bufferable - flush frames before key removal to avoid potential unencrypted transmission depending on the hardware design iwlwifi - preparation for Wi-Fi 7 EHT and multi-link support rtw88 - SDIO bus support - RTL8822BS, RTL8822CS and RTL8821CS SDIO chipset support rtw89 - framework firmware backwards compatibility brcmfmac - Cypress 43439 SDIO support mt76 - mt7921 P2P support - mt7996 mesh A-MSDU support - mt7996 EHT support - mt7996 coredump support wcn36xx - support for pronto v3 hardware ath11k - PCIe DeviceTree bindings - WCN6750: enable SAR support ath10k - convert DeviceTree bindings to YAML * tag 'wireless-next-2023-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (261 commits) wifi: rtw88: Update spelling in main.h wifi: airo: remove ISA_DMA_API dependency wifi: rtl8xxxu: Simplify setting the initial gain wifi: rtl8xxxu: Add rtl8xxxu_write{8,16,32}_{set,clear} wifi: rtl8xxxu: Don't print the vendor/product/serial wifi: rtw88: Fix memory leak in rtw88_usb wifi: rtw88: call rtw8821c_switch_rf_set() according to chip variant wifi: rtw88: set pkg_type correctly for specific rtw8821c variants wifi: rtw88: rtw8821c: Fix rfe_option field width wifi: rtw88: usb: fix priority queue to endpoint mapping wifi: rtw88: 8822c: add iface combination wifi: rtw88: handle station mode concurrent scan with AP mode wifi: rtw88: prevent scan abort with other VIFs wifi: rtw88: refine reserved page flow for AP mode wifi: rtw88: disallow PS during AP mode wifi: rtw88: 8822c: extend reserved page number wifi: rtw88: add port switch for AP mode wifi: rtw88: add bitmap for dynamic port settings wifi: rtw89: mac: use regular int as return type of DLE buffer request wifi: mac80211: remove return value check of debugfs_create_dir() ... ==================== Link: https://lore.kernel.org/r/20230421104726.800BCC433D2@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19wifi: mt76: mt7996: fill txd by host driverRyder Lee1-9/+4
The hardware SDO has issue to fill txd for the moment, so fallback to driver filling method. Fixes: 98686cd21624 (wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices) Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: set NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 on supported driversFelix Fietkau4-0/+4
Drivers that do not generate IV/PN in software can safely rekey PTK0 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: dma: use napi_build_skbFelix Fietkau1-1/+1
Improves performance by using bulk allocation Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7615: increase eeprom size for mt7663Felix Fietkau3-2/+8
mt7663 efuse has 0x600 bytes instead of 0x400. Increase the size in order to fix issues with incomplete calibration data Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7996: enable mesh HW amsdu/de-amsdu supportRyder Lee5-9/+27
This enables HW offloading amsdu/de-amsdu support for 802.11s mesh interface. Co-developed-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7996: enable configured beacon tx rateRyder Lee3-6/+24
The user is allowed to change beacon tx rate (HT/VHT/HE) from hostapd. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7996: enable BSS_CHANGED_MCAST_RATE supportRyder Lee4-4/+18
Similar to BSS_CHANGED_BASIC_RATES, this enables mcast rate configuration through fixed rate tables. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Change-Id: Ifc305e8c7de9a7df4ad5f856e2097d721a886aaa Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7996: enable BSS_CHANGED_BASIC_RATES supportRyder Lee7-33/+85
The connac3 removes fixed rate fields to reduce txd size and introduces global rate tables (64 entries) for rate setting. Driver needs to fill the corresponding idx in MT_TXD6_TX_RATE while tx, and push mt76_rate into predifined table at bootup stage so that mvif->basic_rates_idx can immediately switch out once setting changes. spe_idx is also needed for fixed rate frames, and will be updated by future patches. Note that all table entries are shared across driver and firmware (i.e.TxBF), hence adding MT7996_BASIC_RATES_TBL to reflect mapping status. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: connac: add nss calculation into mt76_connac2_mac_tx_rate_val()Ryder Lee1-16/+27
Take nss calculation into account since this function always wrongly returns 0. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: connac: fix txd multicast rate settingRyder Lee1-1/+2
The vif->bss_conf.mcast_rate should be applied to multicast data frame only. Fixes: 182071cdd594 ("mt76: connac: move connac2_mac_write_txwi in mt76_connac module") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7921e: stop chip reset worker in unregister hookQuan Zhou1-1/+2
If the chip reset worker is triggered during the remove process, the chip DMA may not be properly pushed back to the idle state. This can lead to corruption of the DMA flow due to the chip reset. Therefore, it is necessary to stop the chip reset before the DMA is finalized. To avoid resetting the chip after the reset worker is cancelled, use __mt7921_mcu_drv_pmctrl() instead of mt7921_mcu_drv_pmctrl(). It is safe to ignore the pm mutex because the pm worker and wake worker have already been cancelled. Fixes: 033ae79b3830 ("mt76: mt7921: refactor init.c to be bus independent") Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Co-developed-by: Wang Zhao <wang.zhao@mediatek.com> Signed-off-by: Wang Zhao <wang.zhao@mediatek.com> Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7921e: improve reliability of dma resetQuan Zhou1-16/+20
The hardware team has advised the driver that it is necessary to first put WFDMA into an idle state before resetting the WFDMA. Otherwise, the WFDMA may enter an unknown state where it cannot be polled with the right state successfully. To ensure that the DMA can work properly while a stressful cold reboot test was being made, we have reordered the programming sequence in the driver based on the hardware team's guidance. The patch would modify the WFDMA disabling flow from "DMA reset -> disabling DMASHDL -> disabling WFDMA -> polling and waiting until DMA idle" to "disabling WFDMA -> polling and waiting for DMA idle -> disabling DMASHDL -> DMA reset. Where he polling and waiting until WFDMA is idle is coordinated with the operation of disabling WFDMA. Even while WFDMA is being disabled, it can still handle Tx/Rx requests. The additional polling allows sufficient time for WFDMA to process the last T/Rx request. When the idle state of WFDMA is reached, it is a reliable indication that DMASHDL is also idle to ensure it is safe to disable it and perform the DMA reset. Fixes: 0a1059d0f060 ("mt76: mt7921: move mt7921_dma_reset in dma.c") Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Co-developed-by: Wang Zhao <wang.zhao@mediatek.com> Signed-off-by: Wang Zhao <wang.zhao@mediatek.com> Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7921: fix missing unwind goto in `mt7921u_probe`Jiefeng Li1-1/+1
`mt7921u_dma_init` can only return zero or negative number according to its definition. When it returns non-zero number, there exists an error and this function should handle this error rather than return directly. Fixes: 0d2afe09fad5 ("mt76: mt7921: add mt7921u driver") Signed-off-by: Jiefeng Li <jiefeng_li@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17mt76: mt7921: fix kernel panic by accessing unallocated eeprom.dataSean Wang1-20/+0
The MT7921 driver no longer uses eeprom.data, but the relevant code has not been removed completely since commit 16d98b548365 ("mt76: mt7921: rely on mcu_get_nic_capability"). This could result in potential invalid memory access. To fix the kernel panic issue in mt7921, it is necessary to avoid accessing unallocated eeprom.data which can lead to invalid memory access. Furthermore, it is possible to entirely eliminate the mt7921_mcu_parse_eeprom function and solely depend on mt7921_mcu_parse_response to divide the RxD header. [2.702735] BUG: kernel NULL pointer dereference, address: 0000000000000550 [2.702740] #PF: supervisor write access in kernel mode [2.702741] #PF: error_code(0x0002) - not-present page [2.702743] PGD 0 P4D 0 [2.702747] Oops: 0002 [#1] PREEMPT SMP NOPTI [2.702755] RIP: 0010:mt7921_mcu_parse_response+0x147/0x170 [mt7921_common] [2.702758] RSP: 0018:ffffae7c00fef828 EFLAGS: 00010286 [2.702760] RAX: ffffa367f57be024 RBX: ffffa367cc7bf500 RCX: 0000000000000000 [2.702762] RDX: 0000000000000550 RSI: 0000000000000000 RDI: ffffa367cc7bf500 [2.702763] RBP: ffffae7c00fef840 R08: ffffa367cb167000 R09: 0000000000000005 [2.702764] R10: 0000000000000000 R11: ffffffffc04702e4 R12: ffffa367e8329f40 [2.702766] R13: 0000000000000000 R14: 0000000000000001 R15: ffffa367e8329f40 [2.702768] FS: 000079ee6cf20c40(0000) GS:ffffa36b2f940000(0000) knlGS:0000000000000000 [2.702769] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [2.702775] CR2: 0000000000000550 CR3: 00000001233c6004 CR4: 0000000000770ee0 [2.702776] PKRU: 55555554 [2.702777] Call Trace: [2.702782] mt76_mcu_skb_send_and_get_msg+0xc3/0x11e [mt76 <HASH:1bc4 5>] [2.702785] mt7921_run_firmware+0x241/0x853 [mt7921_common <HASH:6a2f 6>] [2.702789] mt7921e_mcu_init+0x2b/0x56 [mt7921e <HASH:d290 7>] [2.702792] mt7921_register_device+0x2eb/0x5a5 [mt7921_common <HASH:6a2f 6>] [2.702795] ? mt7921_irq_tasklet+0x1d4/0x1d4 [mt7921e <HASH:d290 7>] [2.702797] mt7921_pci_probe+0x2d6/0x319 [mt7921e <HASH:d290 7>] [2.702799] pci_device_probe+0x9f/0x12a Fixes: 16d98b548365 ("mt76: mt7921: rely on mcu_get_nic_capability") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: move mcu_uni_event and mcu_reg_event in common codeLorenzo Bianconi5-30/+19
mcu_uni_event and mcu_reg_event structs are shared between mt7921 and mt7615 drivers, so move them in connac lib. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: enable coredump supportRyder Lee9-2/+496
Host triggered and catastrophic event triggered firmware core dumping for basic firmware issues triage, including state reporting, function calltrace and MCU memory dump. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: add full system reset knobs into debugfsRyder Lee6-30/+178
Add testing points into debugfs to trigger firmware assert and enable full system recovery. Also rename knob "fw_ser" to a clear-cut name "sys_recovery". Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: enable full system reset supportBo Jiao8-71/+365
Add mt7996_reset() and refactor mt7996_mac_reset_work() to support full system recovery. Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7921: enable p2p supportSean Wang6-13/+18
Introduce p2p-go/p2p-client support to mt7921 driver CONNECTION_P2P_GC/GO is not supported with the current firmware so we added mt76_dev to mt76_connac_mcu_sta_basic_tlv signature to use CONNECTION_INFRA_STA/AP instead for p2p-client and p2p-go respectively to make it work. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7921: Replace fake flex-arrays with flexible-array membersGustavo A. R. Silva1-5/+5
Zero-length arrays as fake flexible arrays are deprecated and we are moving towards adopting C99 flexible-array members instead. Address the following warnings found with GCC-13 and -fstrict-flex-arrays=3 enabled: drivers/net/wireless/mediatek/mt76/mt7921/acpi_sar.c:266:25: warning: array subscript 0 is outside array bounds of ‘struct mt7921_asar_dyn_limit_v2[0]’ [-Warray-bounds=] drivers/net/wireless/mediatek/mt76/mt7921/acpi_sar.c:263:25: warning: array subscript 0 is outside array bounds of ‘struct mt7921_asar_dyn_limit[0]’ [-Warray-bounds=] drivers/net/wireless/mediatek/mt76/mt7921/acpi_sar.c:223:28: warning: array subscript <unknown> is outside array bounds of ‘struct mt7921_asar_geo_limit_v2[0]’ [-Warray-bounds=] drivers/net/wireless/mediatek/mt76/mt7921/acpi_sar.c:220:28: warning: array subscript <unknown> is outside array bounds of ‘struct mt7921_asar_geo_limit[0]’ [-Warray-bounds=] drivers/net/wireless/mediatek/mt76/mt7921/acpi_sar.c:334:37: warning: array subscript i is outside array bounds of ‘u8[0]’ {aka ‘unsigned char[]’} [-Warray-bounds=] Notice that the DECLARE_FLEX_ARRAY() helper allows for flexible-array members in unions. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/21 Link: https://github.com/KSPP/linux/issues/272 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
Zero-length arrays are deprecated [1] and have to be replaced by C99 flexible-array members. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help to make progress towards globally enabling -fstrict-flex-arrays=3 [2] Link: https://github.com/KSPP/linux/issues/78 [1] Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [2] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-24 12:28:02 +0300