summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek
AgeCommit message (Collapse)AuthorFilesLines
2019-09-16mt76: fix corrupted software generated tx CCMP PNFelix Fietkau1-1/+1
[ Upstream commit 906d2d3f874a54183df5a609fda180adf0462428 ] Since ccmp_pn is u8 *, the second half needs to start at array index 4 instead of 0. Fixes a connection stall after a certain amount of traffic Fixes: 23405236460b9 ("mt76: fix transmission of encrypted management frames") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-06mt76: mt76x0u: do not reset radio on resumeStanislaw Gruszka3-5/+5
commit 8f2d163cb26da87e7d8e1677368b8ba1ba4d30b3 upstream. On some machines mt76x0u firmware can hung during resume, what result on messages like below: [ 475.480062] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 475.990066] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110 [ 475.990075] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 476.500003] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110 [ 476.500012] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 477.010046] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110 [ 477.010055] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 477.529997] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110 [ 477.530006] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 477.824907] mt76x0 1-8:1.0: Error: send MCU cmd failed:-71 [ 477.824916] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 477.825029] usb 1-8: USB disconnect, device number 6 and possible whole system freeze. This can be avoided, if we do not perform mt76x0_chip_onoff() reset. Cc: stable@vger.kernel.org Fixes: 134b2d0d1fcf ("mt76x0: init files") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26mt7601u: fix possible memory leak when the device is disconnectedLorenzo Bianconi2-7/+18
[ Upstream commit 23377c200b2eb48a60d0f228b2a2e75ed6ee6060 ] When the device is disconnected while passing traffic it is possible to receive out of order urbs causing a memory leak since the skb linked to the current tx urb is not removed. Fix the issue deallocating the skb cleaning up the tx ring. Moreover this patch fixes the following kernel warning [ 57.480771] usb 1-1: USB disconnect, device number 2 [ 57.483451] ------------[ cut here ]------------ [ 57.483462] TX urb mismatch [ 57.483481] WARNING: CPU: 1 PID: 32 at drivers/net/wireless/mediatek/mt7601u/dma.c:245 mt7601u_complete_tx+0x165/00 [ 57.483483] Modules linked in: [ 57.483496] CPU: 1 PID: 32 Comm: kworker/1:1 Not tainted 5.2.0-rc1+ #72 [ 57.483498] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.12.0-2.fc30 04/01/2014 [ 57.483502] Workqueue: usb_hub_wq hub_event [ 57.483507] RIP: 0010:mt7601u_complete_tx+0x165/0x1e0 [ 57.483510] Code: 8b b5 10 04 00 00 8b 8d 14 04 00 00 eb 8b 80 3d b1 cb e1 00 00 75 9e 48 c7 c7 a4 ea 05 82 c6 05 f [ 57.483513] RSP: 0000:ffffc900000a0d28 EFLAGS: 00010092 [ 57.483516] RAX: 000000000000000f RBX: ffff88802c0a62c0 RCX: ffffc900000a0c2c [ 57.483518] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff810a8371 [ 57.483520] RBP: ffff88803ced6858 R08: 0000000000000000 R09: 0000000000000001 [ 57.483540] R10: 0000000000000002 R11: 0000000000000000 R12: 0000000000000046 [ 57.483542] R13: ffff88802c0a6c88 R14: ffff88803baab540 R15: ffff88803a0cc078 [ 57.483548] FS: 0000000000000000(0000) GS:ffff88803eb00000(0000) knlGS:0000000000000000 [ 57.483550] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 57.483552] CR2: 000055e7f6780100 CR3: 0000000028c86000 CR4: 00000000000006a0 [ 57.483554] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 57.483556] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 57.483559] Call Trace: [ 57.483561] <IRQ> [ 57.483565] __usb_hcd_giveback_urb+0x77/0xe0 [ 57.483570] xhci_giveback_urb_in_irq.isra.0+0x8b/0x140 [ 57.483574] handle_cmd_completion+0xf5b/0x12c0 [ 57.483577] xhci_irq+0x1f6/0x1810 [ 57.483581] ? lockdep_hardirqs_on+0x9e/0x180 [ 57.483584] ? _raw_spin_unlock_irq+0x24/0x30 [ 57.483588] __handle_irq_event_percpu+0x3a/0x260 [ 57.483592] handle_irq_event_percpu+0x1c/0x60 [ 57.483595] handle_irq_event+0x2f/0x4c [ 57.483599] handle_edge_irq+0x7e/0x1a0 [ 57.483603] handle_irq+0x17/0x20 [ 57.483607] do_IRQ+0x54/0x110 [ 57.483610] common_interrupt+0xf/0xf [ 57.483612] </IRQ> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26mt7601u: do not schedule rx_tasklet when the device has been disconnectedLorenzo Bianconi1-15/+18
[ Upstream commit 4079e8ccabc3b6d1b503f2376123cb515d14921f ] Do not schedule rx_tasklet when the usb dongle is disconnected. Moreover do not grub rx_lock in mt7601u_kill_rx since usb_poison_urb can run concurrently with urb completion and we can unlink urbs from rx ring in any order. This patch fixes the common kernel warning reported when the device is removed. [ 24.921354] usb 3-14: USB disconnect, device number 7 [ 24.921593] ------------[ cut here ]------------ [ 24.921594] RX urb mismatch [ 24.921675] WARNING: CPU: 4 PID: 163 at drivers/net/wireless/mediatek/mt7601u/dma.c:200 mt7601u_complete_rx+0xcb/0xd0 [mt7601u] [ 24.921769] CPU: 4 PID: 163 Comm: kworker/4:2 Tainted: G OE 4.19.31-041931-generic #201903231635 [ 24.921770] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z97 Extreme4, BIOS P1.30 05/23/2014 [ 24.921782] Workqueue: usb_hub_wq hub_event [ 24.921797] RIP: 0010:mt7601u_complete_rx+0xcb/0xd0 [mt7601u] [ 24.921800] RSP: 0018:ffff9bd9cfd03d08 EFLAGS: 00010086 [ 24.921802] RAX: 0000000000000000 RBX: ffff9bd9bf043540 RCX: 0000000000000006 [ 24.921803] RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff9bd9cfd16420 [ 24.921804] RBP: ffff9bd9cfd03d28 R08: 0000000000000002 R09: 00000000000003a8 [ 24.921805] R10: 0000002f485fca34 R11: 0000000000000000 R12: ffff9bd9bf043c1c [ 24.921806] R13: ffff9bd9c62fa3c0 R14: 0000000000000082 R15: 0000000000000000 [ 24.921807] FS: 0000000000000000(0000) GS:ffff9bd9cfd00000(0000) knlGS:0000000000000000 [ 24.921808] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 24.921808] CR2: 00007fb2648b0000 CR3: 0000000142c0a004 CR4: 00000000001606e0 [ 24.921809] Call Trace: [ 24.921812] <IRQ> [ 24.921819] __usb_hcd_giveback_urb+0x8b/0x140 [ 24.921821] usb_hcd_giveback_urb+0xca/0xe0 [ 24.921828] xhci_giveback_urb_in_irq.isra.42+0x82/0xf0 [ 24.921834] handle_cmd_completion+0xe02/0x10d0 [ 24.921837] xhci_irq+0x274/0x4a0 [ 24.921838] xhci_msi_irq+0x11/0x20 [ 24.921851] __handle_irq_event_percpu+0x44/0x190 [ 24.921856] handle_irq_event_percpu+0x32/0x80 [ 24.921861] handle_irq_event+0x3b/0x5a [ 24.921867] handle_edge_irq+0x80/0x190 [ 24.921874] handle_irq+0x20/0x30 [ 24.921889] do_IRQ+0x4e/0xe0 [ 24.921891] common_interrupt+0xf/0xf [ 24.921892] </IRQ> [ 24.921900] RIP: 0010:usb_hcd_flush_endpoint+0x78/0x180 [ 24.921354] usb 3-14: USB disconnect, device number 7 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05mt7601u: bump supported EEPROM versionStanislaw Gruszka1-1/+1
[ Upstream commit 3bd1505fed71d834f45e87b32ff07157fdda47e0 ] As reported by Michael eeprom 0d is supported and work with the driver. Dump of /sys/kernel/debug/ieee80211/phy1/mt7601u/eeprom_param with 0d EEPORM looks like this: RSSI offset: 0 0 Reference temp: f9 LNA gain: 8 Reg channels: 1-14 Per rate power: raw:05 bw20:05 bw40:05 raw:05 bw20:05 bw40:05 raw:03 bw20:03 bw40:03 raw:03 bw20:03 bw40:03 raw:04 bw20:04 bw40:04 raw:00 bw20:00 bw40:00 raw:00 bw20:00 bw40:00 raw:00 bw20:00 bw40:00 raw:02 bw20:02 bw40:02 raw:00 bw20:00 bw40:00 Per channel power: tx_power ch1:09 ch2:09 tx_power ch3:0a ch4:0a tx_power ch5:0a ch6:0a tx_power ch7:0b ch8:0b tx_power ch9:0b ch10:0b tx_power ch11:0b ch12:0b tx_power ch13:0b ch14:0b Reported-and-tested-by: Michael <ZeroBeat@gmx.de> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05mt76: usb: do not run mt76u_queues_deinit twiceLorenzo Bianconi1-9/+2
[ Upstream commit b3098121c42caaf3aea239b8655cf52d45be116f ] Do not call mt76u_queues_deinit routine in mt76u_alloc_queues error path since it will be run in mt76x0u_register_device or mt76x2u_register_device error path. Current implementation triggers the following kernel warning: [ 67.005516] WARNING: CPU: 2 PID: 761 at lib/refcount.c:187 refcount_sub_and_test_checked+0xa4/0xb8 [ 67.019513] refcount_t: underflow; use-after-free. [ 67.099872] Hardware name: BCM2835 [ 67.106268] Backtrace: [ 67.111584] [<8010c91c>] (dump_backtrace) from [<8010cc00>] (show_stack+0x20/0x24) [ 67.124974] r6:60000013 r5:ffffffff r4:00000000 r3:a50bade6 [ 67.132226] [<8010cbe0>] (show_stack) from [<807ca5f4>] (dump_stack+0xc8/0x114) [ 67.141225] [<807ca52c>] (dump_stack) from [<8011e65c>] (__warn+0xf4/0x120) [ 67.149849] r9:000000bb r8:804d0138 r7:00000009 r6:8099dc84 r5:00000000 r4:b66c7b58 [ 67.160767] [<8011e568>] (__warn) from [<8011e6d0>] (warn_slowpath_fmt+0x48/0x50) [ 67.171436] r9:7f65e128 r8:80d1419c r7:80c0bac4 r6:b97b3044 r5:b7368e00 r4:00000000 [ 67.182433] [<8011e68c>] (warn_slowpath_fmt) from [<804d0138>] (refcount_sub_and_test_checked+0xa4/0xb8) [ 67.195221] r3:80c91c25 r2:8099dc94 [ 67.200370] r4:00000000 [ 67.204397] [<804d0094>] (refcount_sub_and_test_checked) from [<804d0164>] (refcount_dec_and_test_checked+0x18/0x1c) [ 67.218046] r4:b7368e00 r3:00000001 [ 67.223125] [<804d014c>] (refcount_dec_and_test_checked) from [<805db49c>] (usb_free_urb+0x20/0x4c) [ 67.235358] [<805db47c>] (usb_free_urb) from [<7f639804>] (mt76u_buf_free+0x98/0xac [mt76_usb]) [ 67.247302] r4:00000001 r3:00000001 [ 67.252468] [<7f63976c>] (mt76u_buf_free [mt76_usb]) from [<7f639ef8>] (mt76u_queues_deinit+0x44/0x100 [mt76_usb]) [ 67.266102] r8:b8fe8600 r7:b5dac480 r6:b5dace20 r5:00000001 r4:00000000 r3:00000080 [ 67.277132] [<7f639eb4>] (mt76u_queues_deinit [mt76_usb]) from [<7f65c040>] (mt76x0u_cleanup+0x40/0x4c [mt76x0u]) [ 67.290737] r7:b5dac480 r6:b8fe8600 r5:ffffffea r4:b5dace20 [ 67.298069] [<7f65c000>] (mt76x0u_cleanup [mt76x0u]) from [<7f65c564>] (mt76x0u_probe+0x1f0/0x354 [mt76x0u]) [ 67.311174] r4:b5dace20 r3:00000000 [ 67.316312] [<7f65c374>] (mt76x0u_probe [mt76x0u]) from [<805e0b6c>] (usb_probe_interface+0x104/0x240) [ 67.328915] r7:00000000 r6:7f65e034 r5:b6634800 r4:b8fe8620 [ 67.336276] [<805e0a68>] (usb_probe_interface) from [<8056a8bc>] (really_probe+0x224/0x2f8) [ 67.347965] r10:b65f0a00 r9:00000019 r8:7f65e034 r7:80d3e124 r6:00000000 r5:80d3e120 [ 67.359175] r4:b8fe8620 r3:805e0a68 [ 67.364384] [<8056a698>] (really_probe) from [<8056ab60>] (driver_probe_device+0x6c/0x180) [ 67.375974] r10:b65f0a00 r9:7f65e2c0 r8:b8fe8620 r7:00000000 r6:7f65e034 r5:7f65e034 [ 67.387170] r4:b8fe8620 r3:00000000 [ 67.392378] [<8056aaf4>] (driver_probe_device) from [<8056ad54>] (__driver_attach+0xe0/0xe4) [ 67.404097] r9:7f65e2c0 r8:7f65d22c r7:00000000 r6:b8fe8654 r5:7f65e034 r4:b8fe8620 [ 67.415122] [<8056ac74>] (__driver_attach) from [<8056880c>] (bus_for_each_dev+0x68/0xa0) [ 67.426628] r6:8056ac74 r5:7f65e034 r4:00000000 r3:00000027 [ 67.434017] [<805687a4>] (bus_for_each_dev) from [<8056a1cc>] (driver_attach+0x28/0x30) [ 67.445394] r6:80c6ddc8 r5:b7368f80 r4:7f65e034 [ 67.451703] [<8056a1a4>] (driver_attach) from [<80569c24>] (bus_add_driver+0x194/0x21c) [ 67.463081] [<80569a90>] (bus_add_driver) from [<8056b504>] (driver_register+0x8c/0x124) [ 67.474560] r7:80c6ddc8 r6:7f65e034 r5:00000000 r4:7f65e034 [ 67.481964] [<8056b478>] (driver_register) from [<805df510>] (usb_register_driver+0x74/0x140) [ 67.493901] r5:00000000 r4:7f65e000 [ 67.499131] [<805df49c>] (usb_register_driver) from [<7f661024>] (mt76x0_driver_init+0x24/0x1000 [mt76x0u]) [ 67.512258] r9:00000001 r8:7f65e308 r7:00000000 r6:80c08d48 r5:7f661000 r4:7f65e2c0 [ 67.523404] [<7f661000>] (mt76x0_driver_init [mt76x0u]) from [<80102f6c>] (do_one_initcall+0x4c/0x210) [ 67.536142] [<80102f20>] (do_one_initcall) from [<801ae63c>] (do_init_module+0x6c/0x21c) [ 67.547639] r8:7f65e308 r7:80c08d48 r6:b65f0ac0 r5:7f65e2c0 r4:7f65e2c0 [ 67.556129] [<801ae5d0>] (do_init_module) from [<801ad68c>] (load_module+0x1d10/0x2304) Fixes: b40b15e1521f ("mt76: add usb support to mt76 layer") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05mt76: fix a leaked reference by adding a missing of_node_putWen Yang1-8/+16
[ Upstream commit 34e022d8b780a03902d82fb3997ba7c7b1f40c81 ] The call to of_find_node_by_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/net/wireless/mediatek/mt76/eeprom.c:58:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function. ./drivers/net/wireless/mediatek/mt76/eeprom.c:61:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function. ./drivers/net/wireless/mediatek/mt76/eeprom.c:67:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function. ./drivers/net/wireless/mediatek/mt76/eeprom.c:70:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function. ./drivers/net/wireless/mediatek/mt76/eeprom.c:72:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Felix Fietkau <nbd@nbd.name> Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-12mt76x0: dfs: fix IBI_R11 configuration on non-radar channelsLorenzo Bianconi1-2/+6
[ Upstream commit 6bf4a8e902aad7df55d7f2b10b850cfa3f880996 ] Fix IBI_R11 configuration on non-radar channels for mt76x0e driver. This patch improve system stability under heavy load. Moreover use IBI_R11 name and remove magic numbers for 0x212c register Fixes: 0c3b3abc9251 ("mt76x0: pci: add DFS support") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-13mt76x0: init hw capabilitiesLorenzo Bianconi1-0/+1
commit 0ae976a11b4fb5704b597e103b5189237641c1a1 upstream. Enable hw capabilities supported by mt76-usb layer - fast_xmit - tx/rx amsdu - MFP - non-linear tx skbs [This is one line hw feature backport from 0ae976a11b4f ("mt76x0: init hw capabilities"), which add also other different features, however those are not supported in 4.19. 802.11w is supported by mac80211 and mt76x0u driver in 4.19 correctly fall-back to software encryption when 802.11w ciphers are used. Without the patch we fail to associate with WPA3 APs, so this is considered as fix.] Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [remove marking non-working features on 4.19, make topic correspond the change] Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-13mt76: fix potential NULL pointer dereference in mt76_stop_tx_queuesLorenzo Bianconi1-1/+6
[ Upstream commit 7c250f4612ae97aa04500c0d0cff69bb87046e3a ] Starting from mac80211 commit adf8ed01e4fd ("mac80211: add an optional TXQ for other PS-buffered frames") and commit 0eeb2b674f05 ("mac80211: add an option for station management TXQ") a new per-sta queue has been introduced for bufferable management frames. sta->txq[IEEE80211_NUM_TIDS] is initialized just if the driver reports the following hw flags: - IEEE80211_HW_STA_MMPDU_TXQ - IEEE80211_HW_BUFF_MMPDU_TXQ This can produce a NULL pointer dereference in mt76_stop_tx_queues since mt76 iterates on all available sta tx queues assuming they are initialized by mac80211. This issue has been spotted analyzing the code (it has not triggered any crash yet) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-13mt76: fix building without CONFIG_LEDS_CLASSArnd Bergmann3-5/+15
[ Upstream commit b374e8686fc35ae124e62dc78725ea656ba1ef8a ] When CONFIG_LEDS_CLASS is disabled, or it is a loadable module while mt76 is built-in, we run into a link error: drivers/net/wireless/mediatek/mt76/mac80211.o: In function `mt76_register_device': mac80211.c:(.text+0xb78): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `devm_of_led_classdev_register' We don't really need a hard dependency here as the driver can presumably work just fine without LEDs, so this follows the iwlwifi example and adds a separate Kconfig option for the LED support, this will be available whenever it will link, and otherwise the respective code gets left out from the driver object. Fixes: 17f1de56df05 ("mt76: add common code shared between multiple chipsets") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-27mt76x0: run vco calibration for each channel configurationLorenzo Bianconi1-2/+2
commit 473f0a763d2c7cd68a6dedf51e7d81e8f58f78ac upstream. According to vendor sdk, vco calibration has to be executed for each channel configuration whereas mcu calibration has to be performed during channel scanning. This patch fixes the mt76x0 monitor mode issue since in that configuration vco calibration was never executed Fixes: 10de7a8b4ab9 ("mt76x0: phy files") Tested-by: Sid Hayn <sidhayn@gmail.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13mt76: mt76x2: fix multi-interface beacon configurationFelix Fietkau1-2/+1
commit 5289976ad887deb07c76df7eecf553c264aeebed upstream. If the first virtual interface is a station (or an AP with beacons temporarily disabled), the beacon of the second interface needs to occupy hardware beacon slot 0. For some reason the beacon index was incorrectly masked with the virtual interface beacon mask, which prevents the secondary interface from sending beacons unless the first one also does. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13mt76x2u: run device cleanup routine if resume failsLorenzo Bianconi1-3/+11
[ Upstream commit 9b2fd48d36e25b9be9ddb8be8cc1eb263a1d1843 ] Cleanup {tx,rx} and mcu queues if resume operation fails Fixes: ee676cd5017c ("mt76: add driver code for MT76x2u based devices") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-11Merge tag 'alloc-args-v4.19-rc8' of ↵Greg Kroah-Hartman1-5/+5
https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Kees writes: "Fix open-coded multiplication arguments to allocators - Fixes several new open-coded multiplications added in the 4.19 merge window." * tag 'alloc-args-v4.19-rc8' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: treewide: Replace more open-coded allocation size multiplications
2018-10-06treewide: Replace more open-coded allocation size multiplicationsKees Cook1-5/+5
As done treewide earlier, this catches several more open-coded allocation size calculations that were added to the kernel during the merge window. This performs the following mechanical transformations using Coccinelle: kvmalloc(a * b, ...) -> kvmalloc_array(a, b, ...) kvzalloc(a * b, ...) -> kvcalloc(a, b, ...) devm_kzalloc(..., a * b, ...) -> devm_kcalloc(..., a, b, ...) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-09-17mt76x0: fix remove_interfaceStanislaw Gruszka1-2/+1
We wrongly use wcid_mask instead of vif_mask. This creates problems when the interface is removed more than 8 times, for example with iw: iw dev <devname> interface add <name> type <type> iw dev <name> del This caused 'ifconfig up' to fail with error: SIOCSIFFLAGS: No space left on device Fixes: 95e444098a7b ("mt76x0: main file") Reported-and-tested-by: Sid Hayn <sidhayn@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-09mt76: fix build for MediaTek MT7610U USB wireless dongleValdis Kletnieks1-0/+1
The mt76x0 driver requires the mt76 core driver to actually function. So add a 'select' to avoid embarrassing 'symbol unknown' errors when attempting to modprobe it in a module tree that doesn't include mt76.ko Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-09mt76x0: Remove VLA usageKees Cook1-3/+3
Even with "const" variables, the compiler will generate warnings about VLA usage. In the quest to remove all VLAs from the kernel[1], this uses a #define instead of a const to do the array sizing. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com Fixes: e87b5039511a ("mt76x0: eeprom files") Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-09mt76x0: perform mt76x0_mac_set_ampdu_factorStanislaw Gruszka1-2/+0
Remove return added accidentally in mt76x0_mac_set_ampdu_factor. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: a77443498137 ("mt76x0: mac files") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-09mt76x0: correct type for eeprom gain valueStanislaw Gruszka1-1/+1
Change type to u8 to allow sanity check agaist 0xff; Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: e87b5039511a ("mt76x0: eeprom files") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-04mt76x0: rename trace symbolsStanislaw Gruszka8-94/+35
Rename trace symbols that conflict with mt7601u and remove some definitions that are not used. Patch fixes build errors like this: ld: drivers/net/wireless/mediatek/mt76/mt76x0/trace.o:(__tracepoints+0x0): multiple definition of `__tracepoint_set_shared_key'; drivers/net/wireless/mediatek/mt7601u/trace.o:(__tracepoints+0x0): first defined here Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 7b4859026ccd ("mt76x0: core files") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-04mt76x0: rename mt76_* functionsStanislaw Gruszka7-26/+26
mt76_* functions conflicts with mt7601u driver what prevents to build those drivers in the kernel or use both drivers modules at once. Patch fixes build errors like this: ld: drivers/net/wireless/mediatek/mt76/mt76x0/mac.o:(.opd+0x30): multiple definition of `mt76_mac_tx_rate_val'; drivers/net/wireless/mediatek/mt7601u/mac.o:(.opd+0x30): first defined here Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 7b4859026ccd ("mt76x0: core files") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: load firmware from mediatek subdirStanislaw Gruszka1-1/+1
Firmware blob will be located in mediatek subdirectory. Add "u" suffix to indicate this is USB device firmware. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: disable HW before probeStanislaw Gruszka3-1/+6
Disable HW before probe, otherwise after reboot we will fail to initialize MCU. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: Kconfig and Makefile for mt76x0 driverStanislaw Gruszka3-0/+15
Add Kconfig and Makefiles for mt76x0 driver. Now the driver can be build. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: add more statesStanislaw Gruszka1-0/+2
Add states needed for mt76x0 driver. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: main fileStanislaw Gruszka1-0/+403
Add main file of mt76x0 driver. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: dma and tx filesStanislaw Gruszka3-0/+918
Add dma and tx files of mt76x0 driver. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: trace and debugfs filesStanislaw Gruszka3-0/+553
Add trace and debugfs files of mt76x0 driver. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: eeprom filesStanislaw Gruszka2-0/+594
Add eeprom files of mt76x0 driver. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: init filesStanislaw Gruszka2-0/+1002
Add init files of mt76x0 driver. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: phy filesStanislaw Gruszka3-0/+1861
Add phy files of mt76x0 driver. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: mcu filesStanislaw Gruszka2-0/+757
Add mcu files of mt76x0 driver. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: usb filesStanislaw Gruszka2-0/+438
Add usb files of mt76x0 driver. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: mac filesStanislaw Gruszka2-0/+814
Add mac files of mt76x0 driver. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: core filesStanislaw Gruszka4-0/+1062
Core files of mt76x0 driver. mt76x0 driver adds support for Mediatek MT7610U based USB Wi-Fi dongles. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: add driver code for MT76x2u based devicesLorenzo Bianconi12-0/+1891
MT76x2u is a 2x2 USB 802.11ac chipset by MediaTek. This driver currently support station mode Tested-by: <cug_yangyuancong@hotmail.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: add usb support to mt76 layerLorenzo Bianconi8-1/+1336
This will be used by drivers for MT76x2u based devices Tested-by: <cug_yangyuancong@hotmail.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: move mt76x2_debugfs in mt76-common moduleLorenzo Bianconi2-2/+4
Move mt76x2_debugfs code in mt76-common module since it is shared between mt76x2 and mt76x2u Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: add mt76x2_phy_common to mt76x2-common moduleLorenzo Bianconi4-329/+359
Move phy related code shared between mt76x2 and mt76x2u in mt76x2-common module Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: add mt76x2_common to mt76x2-common moduleLorenzo Bianconi5-329/+372
Move core related code shared between mt76x2 and mt76x2u in mt76x2-common module Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: add mt76x2_init_common to mt76x2-common moduleLorenzo Bianconi4-239/+267
Move init related code shared between mt76x2 and mt76x2u in mt76x2-common module Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: add mt76x2_mac_common to mt76x2-common moduleLorenzo Bianconi6-674/+706
Move mac related code shared between mt76x2 and mt76x2u in mt76x2-common module Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: add mt76x2_tx_common to mt76x2-common moduleLorenzo Bianconi4-124/+152
Move tx related code shared between mt76x2 and mt76x2u in mt76x2-common module Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: introduce mt76x2-common moduleLorenzo Bianconi4-3/+22
In order to remove usb dependency from pcie code, add mt76x2-common as a container of shared code between mt76x2 and mt76x2u. Add eeprom code to mt76x2-common module Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: introduce tx_queue_skb function pointer in mt76_bus_opsLorenzo Bianconi3-4/+11
Add tx_queue_skb function pointer in mt76_bus_ops since mt76x2u based devices do not map mt76x2_txwi on dma buffers and it is not possible to reuse mt76_dma_tx_queue_skb() routine to enqueue tx frames to hw buffers Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: rename mt76_tx_queue_skb in mt76_dma_tx_queue_skbLorenzo Bianconi4-83/+85
Move mt76_dma_tx_queue_skb routine in dma.c. Remove static qualifier from mt76_get_txwi definition Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x2: add buffer len to mt76x2_mac_write_txwi signatureLorenzo Bianconi3-5/+5
Add frame length to mt76x2_mac_write_txwi routine signature and do not fetch it from skb since txwi data structure is added at the beginning of the skb for usb based devices and mt76x2_mac_write_txwi will be shared between pci and usb related code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x2: add napi struct to mt76_rx_poll_complete/mt76_rx_complete signaturesLorenzo Bianconi4-11/+10
in order to reuse mt76_rx_complete routine supporting mt76x2u based devices add napi struct to mt76_rx_poll_complete and mt76_rx_complete routine signatures and do not fetch it according to the rx queue index Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 11:03:36 +0300