summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek/mt76/mt7921/dma.c
AgeCommit message (Collapse)AuthorFilesLines
2023-07-07wifi: mt76: mt7921e: fix init command fail with enabled deviceQuan Zhou1-4/+0
For some cases as below, we may encounter the unpreditable chip stats in driver probe() * The system reboot flow do not work properly, such as kernel oops while rebooting, and then the driver do not go back to default status at this moment. * Similar to the flow above. If the device was enabled in BIOS or UEFI, the system may switch to Linux without driver fully shutdown. To avoid the problem, force push the device back to default in probe() * mt7921e_mcu_fw_pmctrl() : return control privilege to chip side. * mt7921_wfsys_reset() : cleanup chip config before resource init. Error log [59007.600714] mt7921e 0000:02:00.0: ASIC revision: 79220010 [59010.889773] mt7921e 0000:02:00.0: Message 00000010 (seq 1) timeout [59010.889786] mt7921e 0000:02:00.0: Failed to get patch semaphore [59014.217839] mt7921e 0000:02:00.0: Message 00000010 (seq 2) timeout [59014.217852] mt7921e 0000:02:00.0: Failed to get patch semaphore [59017.545880] mt7921e 0000:02:00.0: Message 00000010 (seq 3) timeout [59017.545893] mt7921e 0000:02:00.0: Failed to get patch semaphore [59020.874086] mt7921e 0000:02:00.0: Message 00000010 (seq 4) timeout [59020.874099] mt7921e 0000:02:00.0: Failed to get patch semaphore [59024.202019] mt7921e 0000:02:00.0: Message 00000010 (seq 5) timeout [59024.202033] mt7921e 0000:02:00.0: Failed to get patch semaphore [59027.530082] mt7921e 0000:02:00.0: Message 00000010 (seq 6) timeout [59027.530096] mt7921e 0000:02:00.0: Failed to get patch semaphore [59030.857888] mt7921e 0000:02:00.0: Message 00000010 (seq 7) timeout [59030.857904] mt7921e 0000:02:00.0: Failed to get patch semaphore [59034.185946] mt7921e 0000:02:00.0: Message 00000010 (seq 8) timeout [59034.185961] mt7921e 0000:02:00.0: Failed to get patch semaphore [59037.514249] mt7921e 0000:02:00.0: Message 00000010 (seq 9) timeout [59037.514262] mt7921e 0000:02:00.0: Failed to get patch semaphore [59040.842362] mt7921e 0000:02:00.0: Message 00000010 (seq 10) timeout [59040.842375] mt7921e 0000:02:00.0: Failed to get patch semaphore [59040.923845] mt7921e 0000:02:00.0: hardware init failed Cc: stable@vger.kernel.org Fixes: 5c14a5f944b9 ("mt76: mt7921: introduce mt7921e support") Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Juan Martinez <juan.martinez@amd.com> Co-developed-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Message-ID: <39fcb7cee08d4ab940d38d82f21897483212483f.1688569385.git.deren.wu@mediatek.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-17wifi: mt76: mt7921e: improve reliability of dma resetQuan Zhou1-16/+20
The hardware team has advised the driver that it is necessary to first put WFDMA into an idle state before resetting the WFDMA. Otherwise, the WFDMA may enter an unknown state where it cannot be polled with the right state successfully. To ensure that the DMA can work properly while a stressful cold reboot test was being made, we have reordered the programming sequence in the driver based on the hardware team's guidance. The patch would modify the WFDMA disabling flow from "DMA reset -> disabling DMASHDL -> disabling WFDMA -> polling and waiting until DMA idle" to "disabling WFDMA -> polling and waiting for DMA idle -> disabling DMASHDL -> DMA reset. Where he polling and waiting until WFDMA is idle is coordinated with the operation of disabling WFDMA. Even while WFDMA is being disabled, it can still handle Tx/Rx requests. The additional polling allows sufficient time for WFDMA to process the last T/Rx request. When the idle state of WFDMA is reached, it is a reliable indication that DMASHDL is also idle to ensure it is safe to disable it and perform the DMA reset. Fixes: 0a1059d0f060 ("mt76: mt7921: move mt7921_dma_reset in dma.c") Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Co-developed-by: Wang Zhao <wang.zhao@mediatek.com> Signed-off-by: Wang Zhao <wang.zhao@mediatek.com> Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7921e: fix probe timeout after rebootQuan Zhou1-3/+3
In system warm reboot scene, due to the polling timeout(now 1000us) is too short to wait dma idle in time, it may make driver probe fail with error code -ETIMEDOUT. Meanwhile, we also found the dma may take around 70ms to enter idle state. Change the polling idle timeout to 100ms to avoid the probabilistic probe fail. Tested pass with 5000 times warm reboot on x86 platform. [4.477496] pci 0000:01:00.0: attach allowed to drvr mt7921e [internal device] [4.478306] mt7921e 0000:01:00.0: ASIC revision: 79610010 [4.480063] mt7921e: probe of 0000:01:00.0 failed with error -110 Fixes: 0a1059d0f060 ("mt76: mt7921: move mt7921_dma_reset in dma.c") Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: move shared mac definitions in mt76_connac2_mac.hLorenzo Bianconi1-1/+1
Move some mac shared definitions between mt7996, mt7921 and mt7915 in mt76_connac2_mac.h. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: add mt76_connac_irq_enable utility routineLorenzo Bianconi1-4/+4
Most of connac based drivers (mt7921, mt7615, mt7663) share the same code to enable interrupts. Move it in mt76_connac module. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: connac: move tx initialization/cleanup in mt76_connac moduleLorenzo Bianconi1-17/+4
Move mt76_connac_init_tx_queues and mt76_connac_tx_cleanup routines in mt76_connac module. This is a preliminary patch to add mt7990 chipset support. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: add Wireless Ethernet Dispatch supportFelix Fietkau1-1/+1
This is used to support hardware flow offloading from Ethernet to WLAN Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-06mt76: switch to netif_napi_add_tx()Jakub Kicinski1-2/+2
Switch to the new API not requiring passing in NAPI_POLL_WEIGHT. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220504163316.549648-3-kuba@kernel.org
2022-03-16mt76: mt7921: make mt7921_init_tx_queues staticLorenzo Bianconi1-1/+1
mt7921 is only used in mt7921_dma_init routine. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7921e: fix possible probe failure after rebootSean Wang1-119/+0
It doesn't guarantee the mt7921e gets started with ASPM L0 after each machine reboot on every platform. If mt7921e gets started with not ASPM L0, it would be possible that the driver encounters time to time failure in mt7921_pci_probe, like a weird chip identifier is read [ 215.514503] mt7921e 0000:05:00.0: ASIC revision: feed0000 [ 216.604741] mt7921e: probe of 0000:05:00.0 failed with error -110 or failing to init hardware because the driver is not allowed to access the register until the device is in ASPM L0 state. So, we call __mt7921e_mcu_drv_pmctrl in early mt7921_pci_probe to force the device to bring back to the L0 state for we can safely access registers in any case. In the patch, we move all functions from dma.c to pci.c and register mt76 bus operation earilier, that is the __mt7921e_mcu_drv_pmctrl depends on. Fixes: bf3747ae2e25 ("mt76: mt7921: enable aspm by default") Reported-by: Kai-Chuan Hsieh <kaichuan.hsieh@canonical.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7921: use physical addr to unify register accessSean Wang1-13/+14
Use physical address to unify the register access and reorder the entries in fixed_map table to accelerate the address lookup for MT7921e. Cosmetics the patch with adding an extra space to make all entries in the array style consistent. Tested-by: Deren Wu <deren.wu@mediatek.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7921: refactor init.c to be bus independentSean Wang1-0/+3
This is a preliminary patch to introduce mt7921s support. Make init.c reusable between mt7921s and mt7921e Tested-by: Deren Wu <deren.wu@mediatek.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7921: refactor dma.c to be pcie specificSean Wang1-7/+1
This is a preliminary patch to introduce mt7921s support. make dma.c be used dedicately for mt7921e. by moving out mt7921_tx_cleanup from dma.c to mcu.c and then renaming mt7921_tx_cleanup to refect the exact thing the function actually does. Finally, dma.c totally become pcie specific one, only needed to be compiled only when CONFIG_MT7921E is enabled. Tested-by: Deren Wu <deren.wu@mediatek.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: remove mt76_wcid pointer from mt76_tx_status_check signatureLorenzo Bianconi1-1/+1
Remove mt76_wcid pointer from mt76_tx_status_check signature since it is always set to NULL Tested-by: mrkiko.rs@gmail.com Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7921: move mt7921_queue_rx_skb to mac.cLorenzo Bianconi1-34/+0
As for 7915 moving mt7921_queue_rx_skb makes it possible to make some functions in mac.c static Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: reduce rx buffer size to 2048Lorenzo Bianconi1-5/+3
Reduce rx buffer size to 2048 for mt7921/mt7915/mt7615 since we now support rx amsdu offload Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: connac: add mt76_connac_power_save_sched in mt76_connac_pm_unrefLorenzo Bianconi1-2/+2
Schedule power_save work running mt76_connac_pm_unref in order to reduce power consumption Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7921: reset wfsys during hw probeLorenzo Bianconi1-0/+4
This patch fixes a mcu hang during device probe on Marvell ESPRESSObin after a hot reboot. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7921: fix mt7921_wfsys_reset sequenceSean Wang1-3/+3
WiFi subsytem reset should control MT_WFSYS_SW_RST_B and then poll the same register until the bit WFSYS_SW_INIT_DONE bit is set. Fixes: 0c1ce9884607 ("mt76: mt7921: add wifi reset support") Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: introduce mt7921_wpdma_reinit_cond utility routineLorenzo Bianconi1-0/+25
Add mt7921_wpdma_reinit_cond to check dummy reg if driver needs to reinitialized WPDMA after driver_own operation Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: introduce mt7921_dma_{enable,disable} utilitiesLorenzo Bianconi1-73/+35
Introduce mt7921_dma_enable and mt7921_dma_disable utilities routine in order for code reusing between mt7921_dma_reset and mt7921_dma_init. This is a preliminary patch to reset dma during device driver_own request. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: introduce mt7921_wpdma_reset utility routineLorenzo Bianconi1-1/+43
Introduce mt7921_wpdma_reset routine to reset wpdma during chip reset or driver_own request. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: move mt7921_dma_reset in dma.cLorenzo Bianconi1-1/+72
Move mt7921_dma_reset routine in dma.c and make mt7921_dma_prefetch static. Moreover add force parameter to mt7921_dma_reset signature. This is a preliminary patch to reset dma mt7921_mcu_drv_pmctrl. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: enable sw interruptsLorenzo Bianconi1-0/+1
Enable sw interrupts in order to wake the device from deep sleep receiving packets Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: rely on mt76_connac_pm_ref/mt76_connac_pm_unref in tx/rx napiLorenzo Bianconi1-5/+28
Introduce mt7921_poll_rx rx napi callback for mt7921. Do not access device registers in tx/rx napi if the device is not awake. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: dma: add the capability to define a custom rx napi poll routineLorenzo Bianconi1-1/+1
Add the capability to define a custom rx napi callback for each driver. This is a preliminary patch to properly support runtime-pm on rx side Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: introduce MT_WFDMA_DUMMY_CR definitionLorenzo Bianconi1-1/+1
Introduce MT_WFDMA_DUMMY_CR definition and remove magic numbers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: use threaded NAPIFelix Fietkau1-1/+1
With threaded NAPI, the rx handler function is no longer bound to the CPU that fired the interrupt, which significantly helps to spread the workload over multiple CPUs, especially when multiple devices are using threaded NAPI at the same time. Exclude the tx handler from threaded NAPI by using a separate dummy netdev. The work is small and short-lived enough that it makes more sense to run it in softirq instead of creating a dedicated thread Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-29mt76: mt7921: add DMA supportSean Wang1-0/+356
Add DMA and register access support to MT7921e driver to set up the link for the data movement between the host and MT7921 MAC, or the host and MT7921 MCU. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Co-developed-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 03:59:09 +0300